API tools faq
paste
codekipper

netbooting.log

codekipper
Mar 14th, 2016
242
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.03 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2016.01-rc1-00007-geb83b12-dirty (Nov 22 2015 - 08:44:21 +0100) Allwinner Technology
  2.  
  3. CPU: Allwinner A20 (SUN7I)
  4. I2C: ready
  5. DRAM: 1 GiB
  6. MMC: SUNXI SD/MMC: 0
  7. *** Warning - bad CRC, using default environment
  8.  
  9. In: serial
  10. Out: serial
  11. Err: serial
  12. SCSI: SUNXI SCSI INIT
  13. SATA link 0 timeout.
  14. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
  15. flags: ncq stag pm led clo only pmp pio slum part ccc apst
  16. Net: eth0: ethernet@01c50000
  17. starting USB...
  18. USB0: USB EHCI 1.00
  19. USB1: USB OHCI 1.0
  20. USB2: USB EHCI 1.00
  21. USB3: USB OHCI 1.0
  22. scanning bus 0 for devices... 2 USB Device(s) found
  23. scanning bus 2 for devices... 1 USB Device(s) found
  24. Hit any key to stop autoboot: 2  1  0
  25. switch to partitions #0, OK
  26. mmc0 is current device
  27. Scanning mmc 0:1...
  28. Found U-Boot script /boot.scr
  29. reading /boot.scr
  30. 1452 bytes read in 22 ms (64.5 KiB/s)
  31. ## Executing script at 43100000
  32. Speed: 100, full duplex
  33. BOOTP broadcast 1
  34. DHCP client bound to address 192.168.0.124 (10 ms)
  35. ## Error: Can't overwrite "ethaddr"
  36. ## Error inserting "ethaddr" variable, errno=1
  37. Speed: 100, full duplex
  38. Using ethernet@01c50000 device
  39. TFTP from server 192.168.0.199; our IP address is 192.168.0.124
  40. Filename 'uImage'.
  41. Load address: 0x46000000
  42. Loading: *#################################################################
  43. #################################################################
  44. #################################################################
  45. #################################################################
  46. ########################
  47. 3 MiB/s
  48. done
  49. Bytes transferred = 4154728 (3f6568 hex)
  50. Speed: 100, full duplex
  51. Using ethernet@01c50000 device
  52. TFTP from server 192.168.0.199; our IP address is 192.168.0.124
  53. Filename 'sun7i-a20-itead-ibox.dtb'.
  54. Load address: 0x49000000
  55. Loading: *###
  56. 2.9 MiB/s
  57. done
  58. Bytes transferred = 30680 (77d8 hex)
  59. ## Booting kernel from Legacy Image at 46000000 ...
  60. Image Name: Linux-4.5.0-rc5-next-20160226-00
  61. Image Type: ARM Linux Kernel Image (uncompressed)
  62. Data Size: 4154664 Bytes = 4 MiB
  63. Load Address: 40008000
  64. Entry Point: 40008000
  65. Verifying Checksum ... OK
  66. ## Flattened Device Tree blob at 49000000
  67. Booting using the fdt blob at 0x49000000
  68. Loading Kernel Image ... OK
  69. Using Device Tree in place at 49000000, end 4900a7d7
  70.  
  71. Starting kernel ...
  72.  
  73. [ 0.000000] Booting Linux on physical CPU 0x0
  74. [ 0.000000] Linux version 4.5.0-rc5-next-20160226-00031-gfe3a4f7 (marcus@coopshtpc) (gcc version 4.9.2 (GCC) ) #29 SMP Sat Feb 27 16:05:35 CET 2016
  75. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  76. [ 0.000000] CPU: div instructions available: patching division code
  77. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  78. [ 0.000000] Machine model: Itead Ibox A20
  79. [ 0.000000] Memory policy: Data cache writealloc
  80. [ 0.000000] psci: probing for conduit method from DT.
  81. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
  82. [ 0.000000] PERCPU: Embedded 13 pages/cpu @ef7c3000 s22400 r8192 d22656 u53248
  83. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608
  84. [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk=serial,uart0,115200 root=/dev/mmcblk0p2 ip=192.168.0.124:192.168.0.199:192.168.0.1:255.255.255.0::eth0
  85. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  86. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  87. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  88. [ 0.000000] Memory: 1029504K/1048576K available (6320K kernel code, 308K rwdata, 1760K rodata, 1024K init, 275K bss, 19072K reserved, 0K cma-reserved, 262144K highmem)
  89. [ 0.000000] Virtual kernel memory layout:
  90. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  91. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  92. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  93. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  94. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  95. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  96. [ 0.000000] .text : 0xc0008000 - 0xc08e4288 (9073 kB)
  97. [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
  98. [ 0.000000] .data : 0xc0a00000 - 0xc0a4d298 ( 309 kB)
  99. [ 0.000000] .bss : 0xc0a4f000 - 0xc0a93e68 ( 276 kB)
  100. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  101. [ 0.000000] Hierarchical RCU implementation.
  102. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  103. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
  104. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  105. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  106. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  107. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  108. [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  109. [ 0.000020] Switching to timer-based delay loop, resolution 41ns
  110. [ 0.000426] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  111. [ 0.000619] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
  112. [ 0.000809] Console: colour dummy device 80x30
  113. [ 0.000841] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  114. [ 0.000855] pid_max: default: 32768 minimum: 301
  115. [ 0.000958] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  116. [ 0.000969] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  117. [ 0.001634] CPU: Testing write buffer coherency: ok
  118. [ 0.001961] /cpus/cpu@0 missing clock-frequency property
  119. [ 0.001979] /cpus/cpu@1 missing clock-frequency property
  120. [ 0.001992] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  121. [ 0.002050] Setting up static identity map for 0x40100000 - 0x40100058
  122. [ 0.004984] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  123. [ 0.005070] Brought up 2 CPUs
  124. [ 0.005092] SMP: Total of 2 processors activated (96.00 BogoMIPS).
  125. [ 0.005099] CPU: All CPU(s) started in HYP mode.
  126. [ 0.005104] CPU: Virtualization extensions available.
  127. [ 0.006040] devtmpfs: initialized
  128. [ 0.014207] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  129. [ 0.014589] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  130. [ 0.014748] pinctrl core: initialized pinctrl subsystem
  131. [ 0.016047] NET: Registered protocol family 16
  132. [ 0.016393] DMA: preallocated 256 KiB pool for atomic coherent allocations
  133. [ 0.024524] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  134. [ 0.024532] hw-breakpoint: maximum watchpoint size is 8 bytes.
  135. [ 0.037002] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
  136. [ 0.037090] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  137. [ 0.037159] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  138. [ 0.038677] SCSI subsystem initialized
  139. [ 0.039302] usbcore: registered new interface driver usbfs
  140. [ 0.039375] usbcore: registered new interface driver hub
  141. [ 0.039449] usbcore: registered new device driver usb
  142. [ 0.039822] pps_core: LinuxPPS API ver. 1 registered
  143. [ 0.039829] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  144. [ 0.039864] PTP clock support registered
  145. [ 0.040312] Advanced Linux Sound Architecture Driver Initialized.
  146. [ 0.042215] clocksource: Switched to clocksource arch_sys_counter
  147. [ 0.054116] NET: Registered protocol family 2
  148. [ 0.054696] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  149. [ 0.054788] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  150. [ 0.054915] TCP: Hash tables configured (established 8192 bind 8192)
  151. [ 0.054996] UDP hash table entries: 512 (order: 2, 16384 bytes)
  152. [ 0.055055] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  153. [ 0.055274] NET: Registered protocol family 1
  154. [ 0.055718] RPC: Registered named UNIX socket transport module.
  155. [ 0.055734] RPC: Registered udp transport module.
  156. [ 0.055740] RPC: Registered tcp transport module.
  157. [ 0.055746] RPC: Registered tcp NFSv4.1 backchannel transport module.
  158. [ 0.056458] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  159. [ 0.057913] futex hash table entries: 512 (order: 3, 32768 bytes)
  160. [ 0.068893] NFS: Registering the id_resolver key type
  161. [ 0.068971] Key type id_resolver registered
  162. [ 0.068979] Key type id_legacy registered
  163. [ 0.072680] bounce: pool size: 64 pages
  164. [ 0.072989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  165. [ 0.073008] io scheduler noop registered
  166. [ 0.073021] io scheduler deadline registered
  167. [ 0.073056] io scheduler cfq registered (default)
  168. [ 0.073547] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_id_detect_pin@0, deferring probe
  169. [ 0.076668] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  170. [ 0.153491] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  171. [ 0.157005] console [ttyS0] disabled
  172. [ 0.177206] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 44, base_baud = 1500000) is a U6_16550A
  173. [ 0.821909] console [ttyS0] enabled
  174. [ 0.827520] CAN device driver interface
  175. [ 0.832102] sun7i-dwmac 1c50000.ethernet: no regulator found
  176. [ 0.837887] sun7i-dwmac 1c50000.ethernet: no reset control found
  177. [ 0.843923] Ring mode enabled
  178. [ 0.846978] No HW DMA feature register supported
  179. [ 0.851502] Normal descriptors
  180. [ 0.854839] TX Checksum insertion supported
  181. [ 0.859781] sun7i-dwmac 1c50000.ethernet eth0: No MDIO subnode found
  182. [ 0.869766] libphy: stmmac: probed
  183. [ 0.873236] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active
  184. [ 0.879992] usbcore: registered new interface driver asix
  185. [ 0.885501] usbcore: registered new interface driver ax88179_178a
  186. [ 0.891645] usbcore: registered new interface driver cdc_ether
  187. [ 0.897574] usbcore: registered new interface driver net1080
  188. [ 0.903310] usbcore: registered new interface driver cdc_subset
  189. [ 0.909276] usbcore: registered new interface driver zaurus
  190. [ 0.914920] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  191. [ 0.922428] usbcore: registered new interface driver cdc_ncm
  192. [ 0.928085] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  193. [ 0.934649] ehci-platform: EHCI generic platform driver
  194. [ 0.940413] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  195. [ 0.946643] ohci-platform: OHCI generic platform driver
  196. [ 0.952803] udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers
  197. [ 0.963163] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
  198. [ 0.969949] sunxi-rtc 1c20d00.rtc: RTC enabled
  199. [ 0.974569] i2c /dev entries driver
  200. [ 0.979222] axp20x-i2c 0-0034: AXP20x variant AXP209 found
  201. [ 0.998419] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
  202. [ 1.014233] axp20x-i2c 0-0034: AXP20X driver loaded
  203. [ 1.021005] lirc_dev: IR Remote Control driver registered, major 247
  204. [ 1.027516] IR NEC protocol handler initialized
  205. [ 1.032050] IR RC5(x/sz) protocol handler initialized
  206. [ 1.037139] IR RC6 protocol handler initialized
  207. [ 1.041671] IR JVC protocol handler initialized
  208. [ 1.046223] IR Sony protocol handler initialized
  209. [ 1.050842] IR SANYO protocol handler initialized
  210. [ 1.055562] IR Sharp protocol handler initialized
  211. [ 1.060268] IR MCE Keyboard/mouse protocol handler initialized
  212. [ 1.066115] IR LIRC bridge handler initialized
  213. [ 1.070560] IR XMP protocol handler initialized
  214. [ 1.075632] Registered IR keymap rc-empty
  215. [ 1.080021] input: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0/input1
  216. [ 1.088239] rc rc0: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0
  217. [ 1.096271] input: MCE IR Keyboard/Mouse (sunxi-ir) as /devices/virtual/input/input2
  218. [ 1.104462] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
  219. [ 1.112446] sunxi-ir 1c21800.ir: initialized sunXi IR driver
  220. [ 1.119143] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  221. [ 1.128295] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  222. [ 1.172418] sunxi-mmc 1c0f000.mmc: base:0xf08bc000 irq:26
  223. [ 1.179078] sun4i-ss 1c15000.crypto-engine: no reset control found
  224. [ 1.186869] sun4i-ss 1c15000.crypto-engine: Die ID 0
  225. [ 1.193669] usbcore: registered new interface driver usbhid
  226. [ 1.199236] usbhid: USB HID core driver
  227. [ 1.203187] usbcore: registered new interface driver rtl8723au
  228. [ 1.212578] sun4i-codec 1c22c00.codec: ASoC: Property 'allwinner,audio-routing' does not exist or its length is not even
  229. [ 1.223469] sun4i-codec 1c22c00.codec: No audio routing in dts
  230. [ 1.230557] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
  231. [ 1.242799] NET: Registered protocol family 17
  232. [ 1.247271] can: controller area network core (rev 20120528 abi 9)
  233. [ 1.253571] NET: Registered protocol family 29
  234. [ 1.258028] can: raw protocol (rev 20120528)
  235. [ 1.262317] can: broadcast manager protocol (rev 20120528 t)
  236. [ 1.267985] can: netlink gateway (rev 20130117) max_hops=1
  237. [ 1.273833] Key type dns_resolver registered
  238. [ 1.289559] Registering SWP/SWPB emulation handler
  239. [ 1.298026] gpiod_to_irq: invalid GPIO
  240. [ 1.329483] mmc0: host does not support reading read-only switch, assuming write-enable
  241. [ 1.339927] mmc0: new high speed SDHC card at address 1234
  242. [ 1.346063] mmcblk0: mmc0:1234 SA08G 7.21 GiB
  243. [ 1.352173] mmcblk0: p1 p2
  244. [ 1.372324] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
  245. [ 1.379837] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
  246. [ 1.387026] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  247. [ 1.396001] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
  248. [ 1.405524] scsi host0: ahci-sunxi
  249. [ 1.409302] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 31
  250. [ 1.417770] ehci-platform 1c14000.usb: EHCI Host Controller
  251. [ 1.423425] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  252. [ 1.431341] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
  253. [ 1.452234] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  254. [ 1.458634] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  255. [ 1.465454] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  256. [ 1.472683] usb usb1: Product: EHCI Host Controller
  257. [ 1.477556] usb usb1: Manufacturer: Linux 4.5.0-rc5-next-20160226-00031-gfe3a4f7 ehci_hcd
  258. [ 1.485734] usb usb1: SerialNumber: 1c14000.usb
  259. [ 1.491131] hub 1-0:1.0: USB hub found
  260. [ 1.494976] hub 1-0:1.0: 1 port detected
  261. [ 1.499829] ehci-platform 1c1c000.usb: EHCI Host Controller
  262. [ 1.505477] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  263. [ 1.513380] ehci-platform 1c1c000.usb: irq 32, io mem 0x01c1c000
  264. [ 1.532230] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  265. [ 1.538558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  266. [ 1.545376] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  267. [ 1.552607] usb usb2: Product: EHCI Host Controller
  268. [ 1.557481] usb usb2: Manufacturer: Linux 4.5.0-rc5-next-20160226-00031-gfe3a4f7 ehci_hcd
  269. [ 1.565658] usb usb2: SerialNumber: 1c1c000.usb
  270. [ 1.571018] hub 2-0:1.0: USB hub found
  271. [ 1.574847] hub 2-0:1.0: 1 port detected
  272. [ 1.579707] ohci-platform 1c14400.usb: Generic Platform OHCI controller
  273. [ 1.586392] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
  274. [ 1.594311] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
  275. [ 1.656417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  276. [ 1.663224] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  277. [ 1.670437] usb usb3: Product: Generic Platform OHCI controller
  278. [ 1.676369] usb usb3: Manufacturer: Linux 4.5.0-rc5-next-20160226-00031-gfe3a4f7 ohci_hcd
  279. [ 1.684548] usb usb3: SerialNumber: 1c14400.usb
  280. [ 1.690832] hub 3-0:1.0: USB hub found
  281. [ 1.694742] hub 3-0:1.0: 1 port detected
  282. [ 1.699598] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
  283. [ 1.706289] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
  284. [ 1.714211] ohci-platform 1c1c400.usb: irq 33, io mem 0x01c1c400
  285. [ 1.753673] ata1: SATA link down (SStatus 0 SControl 300)
  286. [ 1.776418] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  287. [ 1.783231] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  288. [ 1.790445] usb usb4: Product: Generic Platform OHCI controller
  289. [ 1.796381] usb usb4: Manufacturer: Linux 4.5.0-rc5-next-20160226-00031-gfe3a4f7 ohci_hcd
  290. [ 1.804562] usb usb4: SerialNumber: 1c1c400.usb
  291. [ 1.810103] hub 4-0:1.0: USB hub found
  292. [ 1.813953] usb 1-1: new high-speed USB device number 2 using ehci-platform
  293. [ 1.820974] hub 4-0:1.0: 1 port detected
  294. [ 1.826048] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
  295. [ 1.833924] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  296. [ 1.839677] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
  297. [ 1.847875] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  298. [ 1.854701] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  299. [ 1.861916] usb usb5: Product: MUSB HDRC host driver
  300. [ 1.866893] usb usb5: Manufacturer: Linux 4.5.0-rc5-next-20160226-00031-gfe3a4f7 musb-hcd
  301. [ 1.875072] usb usb5: SerialNumber: musb-hdrc.1.auto
  302. [ 1.880896] hub 5-0:1.0: USB hub found
  303. [ 1.884840] hub 5-0:1.0: 1 port detected
  304. [ 1.912521] using random self ethernet address
  305. [ 1.916968] using random host ethernet address
  306. [ 1.922308] usb0: HOST MAC 36:25:54:da:52:07
  307. [ 1.926603] usb0: MAC 0e:1f:f4:1b:b9:c6
  308. [ 1.930472] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
  309. [ 1.937978] g_cdc gadget: g_cdc ready
  310. [ 1.943112] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif mapping ok
  311. [ 1.950902] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:01:40 UTC (100)
  312. [ 1.974047] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
  313. [ 1.980750] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  314. [ 1.987910] usb 1-1: Product: USB2.0 Hub
  315. [ 1.993083] hub 1-1:1.0: USB hub found
  316. [ 1.997169] hub 1-1:1.0: 4 ports detected
  317. [ 2.052876] RX IPC Checksum Offload disabled
  318. [ 2.057241] No MAC Management Counters available
  319. [ 4.042462] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  320. [ 4.072375] IP-Config: Complete:
  321. [ 4.075612] device=eth0, hwaddr=02:c7:0b:82:45:1f, ipaddr=192.168.0.124, mask=255.255.255.0, gw=192.168.0.1
  322. [ 4.085819] host=192.168.0.124, domain=, nis-domain=(none)
  323. [ 4.091733] bootserver=192.168.0.199, rootserver=192.168.0.199, rootpath=
  324. [ 4.099006] vcc3v0: disabling
  325. [ 4.101974] vcc5v0: disabling
  326. [ 4.105567] ALSA device list:
  327. [ 4.108537] #0: sun4i-codec
  328. [ 4.111499] #1: On-board SPDIF
  329. [ 4.116523] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  330. [ 4.125537] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  331. [ 4.136049] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  332. [ 4.143397] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  333. [ 6.752743] random: nonblocking pool is initialized
  334. [ 7.897741] EXT4-fs (mmcblk0p2): recovery complete
  335. [ 7.912618] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  336. [ 7.920758] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  337. [ 7.931963] devtmpfs: mounted
  338. [ 7.936141] Freeing unused kernel memory: 1024K (c0900000 - c0a00000)
  339. INIT: version 2.88 booting
  340. [info] Using makefile-style concurrent boot in runlevel S.
  341. [....] Starting the hotplug events dispatcher: udevd[ 8.761204] udevd[197]: starting version 175
  342. [ ok .
  343. [....] Synthesizing the initial hotplug events...[ ok done.
  344. [....] Waiting for /dev to be fully populated...lircd-0.9.0-pre1[398]: lircd(devinput) ready, using /var/run/lirc/lircd
  345. [ ok done.
  346. hostname: the specified hostname is invalid
  347. [....] Setting preliminary keymap...[ ok done.
  348. [....] Activating swap...[ ok done.
  349. [ 11.914018] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  350. [....] Checking root file system...fsck from util-linux 2.20.1
  351. /dev/mmcblk0p2: clean, 55514/472352 files, 729415/1887232 blocks
  352. [ ok done.
  353. [ 12.105646] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  354. [....] Cleaning up temporary files... /tmp[ ok .
  355. [info] Loading kernel module sunxi-ir.
  356. libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/4.5.0-rc5-next-20160226-00031-gfe3a4f7/modules.dep.bin'
  357. [info] Loading kernel module sun4i_codec.
  358. libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/4.5.0-rc5-next-20160226-00031-gfe3a4f7/modules.dep.bin'
  359. [info] Loading kernel module snd_soc_spdif_tx.
  360. libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/4.5.0-rc5-next-20160226-00031-gfe3a4f7/modules.dep.bin'
  361. [info] Loading kernel module snd_soc_simple_card.
  362. libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/4.5.0-rc5-next-20160226-00031-gfe3a4f7/modules.dep.bin'
  363. [info] Loading kernel module sun4i_spdif.
  364. libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/4.5.0-rc5-next-20160226-00031-gfe3a4f7/modules.dep.bin'
  365. [....] Activating lvm and md swap...[ ok done.
  366. [....] Checking file systems...fsck from util-linux 2.20.1
  367. [ ok done.
  368. [....] Mounting local filesystems...[ ok done.
  369. [....] Activating swapfile swap...[ ok done.
  370. [....] Cleaning up temporary files...[ ok .
  371. [....] Setting kernel variables ...[ ok done.
  372. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
  373. Copyright 2004-2011 Internet Systems Consortium.
  374. All rights reserved.
  375. For info, please visit https://www.isc.org/software/dhcp/
  376.  
  377. Listening on LPF/eth0/02:c7:0b:82:45:1f
  378. Sending on LPF/eth0/02:c7:0b:82:45:1f
  379. Sending on Socket/fallback
  380. DHCPREQUEST on eth0 to 255.255.255.255 port 67
  381. DHCPACK from 192.168.0.1
  382. RTNETLINK answers: File exists
  383. bound to 192.168.0.124 -- renewal in 32807 seconds.
  384. Starting rpcbind daemon...rpcbind: cannot create socket for udp6
  385. rpcbind: cannot create socket for tcp6
  386. .
  387. Starting NFS common utilities: statd idmapd.
  388. [ ok done.
  389. [....] Starting rpcbind daemon...[....] Already running.[ ok .
  390. [....] Starting NFS common utilities: statd idmapd[ ok .
  391. [....] Cleaning up temporary files...[ ok .
  392. [....] Setting up ALSA...[ ok done.
  393. [info] Setting console screen modes and fonts.
  394. setterm: cannot (un)set powersave mode: Inappropriate ioctl for device
  395. [info] Setting console screen modes.
  396. [info] Skipping font and keymap setup (handled by console-setup).
  397. [....] Setting up console font and keymap...[ ok done.
  398. [....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok .
  399. [....] startpar: service(s) returned failure: hostname.sh ...[FAIL failed!
  400. INIT: Entering runlevel: 2
  401. [info] Using makefile-style concurrent boot in runlevel 2.
  402. [....] Starting remote control daemon(s) : LIRC :[ ok .
  403. [....] Starting rpcbind daemon...[....] Already running.[ ok .
  404. [....] Starting system message bus: dbus[ ok .
  405. [....] Starting NFS common utilities: statd idmapd[ ok .
  406. [....] Starting OpenBSD Secure Shell server: sshd[ ok .
  407. [....] Starting NTP server: ntpd[ ok .
  408.  
  409. Debian GNU/Linux 7 192.168.0.124 ttyS0
  410.  
  411. 192 login:
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!