API tools faq
paste
Guest User

dmesg

a guest
Jan 29th, 2016
262
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.15 KB | None | 0 0
raw download clone embed print report
  1. [ 3.189816] Asymmetric key parser 'x509' registered
  2. [ 3.189861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  3. [ 3.189954] io scheduler noop registered
  4. [ 3.189957] io scheduler deadline registered (default)
  5. [ 3.189986] io scheduler cfq registered
  6. [ 3.190330] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
  7. [ 3.190822] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  8. [ 3.190868] pciehp 0000:00:02.0:pcie04: HPC vendor_id 1022 device_id 1707 ss_vid 1022 ss_did 1234
  9. [ 3.190944] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
  10. [ 3.190950] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  11. [ 3.190987] vesafb: mode is 1600x900x32, linelength=6400, pages=0
  12. [ 3.190988] vesafb: scrolling: redraw
  13. [ 3.190990] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
  14. [ 3.192179] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004e80000, using 5632k, total 5632k
  15. [ 3.199399] Console: switching to colour frame buffer device 200x56
  16. [ 3.206537] fb0: VESA VGA frame buffer device
  17. [ 3.206574] ipmi message handler version 39.2
  18. [ 3.262717] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  19. [ 3.318889] ACPI: AC Adapter [ACAD] (on-line)
  20. [ 3.319006] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  21. [ 3.319010] ACPI: Power Button [PWRB]
  22. [ 3.319058] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
  23. [ 3.319513] ACPI: Lid Switch [LID]
  24. [ 3.319566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  25. [ 3.319569] ACPI: Power Button [PWRF]
  26. [ 3.319761] ACPI: acpi_idle registered with cpuidle
  27. [ 3.320666] [Firmware Bug]: Invalid critical threshold (0)
  28. [ 3.322707] thermal LNXTHERM:00: registered as thermal_zone0
  29. [ 3.322710] ACPI: Thermal Zone [THRM] (66 C)
  30. [ 3.322740] GHES: HEST is not enabled!
  31. [ 3.322974] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  32. [ 3.325264] Linux agpgart interface v0.103
  33. [ 3.327777] brd: module loaded
  34. [ 3.329159] loop: module loaded
  35. [ 3.329698] libphy: Fixed MDIO Bus: probed
  36. [ 3.329784] tun: Universal TUN/TAP device driver, 1.6
  37. [ 3.329786] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  38. [ 3.329978] PPP generic driver version 2.4.2
  39. [ 3.330183] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  40. [ 3.330201] ehci-pci: EHCI PCI platform driver
  41. [ 3.330394] QUIRK: Enable AMD PLL fix
  42. [ 3.330424] ehci-pci 0000:00:12.2: EHCI Host Controller
  43. [ 3.330430] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
  44. [ 3.330435] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  45. [ 3.330447] ehci-pci 0000:00:12.2: debug port 1
  46. [ 3.330493] ehci-pci 0000:00:12.2: irq 17, io mem 0xf044c000
  47. [ 3.342282] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
  48. [ 3.342358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  49. [ 3.342360] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  50. [ 3.342362] usb usb1: Product: EHCI Host Controller
  51. [ 3.342364] usb usb1: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
  52. [ 3.342365] usb usb1: SerialNumber: 0000:00:12.2
  53. [ 3.342582] hub 1-0:1.0: USB hub found
  54. [ 3.342592] hub 1-0:1.0: 5 ports detected
  55. [ 3.342961] ehci-pci 0000:00:13.2: EHCI Host Controller
  56. [ 3.342966] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
  57. [ 3.342970] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  58. [ 3.342982] ehci-pci 0000:00:13.2: debug port 1
  59. [ 3.343016] ehci-pci 0000:00:13.2: irq 17, io mem 0xf044a000
  60. [ 3.354385] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
  61. [ 3.354459] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  62. [ 3.354462] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  63. [ 3.354463] usb usb2: Product: EHCI Host Controller
  64. [ 3.354465] usb usb2: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
  65. [ 3.354467] usb usb2: SerialNumber: 0000:00:13.2
  66. [ 3.354811] hub 2-0:1.0: USB hub found
  67. [ 3.354821] hub 2-0:1.0: 5 ports detected
  68. [ 3.355163] ehci-pci 0000:00:16.2: EHCI Host Controller
  69. [ 3.355170] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
  70. [ 3.355174] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  71. [ 3.355186] ehci-pci 0000:00:16.2: debug port 1
  72. [ 3.355220] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0448000
  73. [ 3.366387] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
  74. [ 3.366463] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  75. [ 3.366466] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  76. [ 3.366467] usb usb3: Product: EHCI Host Controller
  77. [ 3.366469] usb usb3: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
  78. [ 3.366471] usb usb3: SerialNumber: 0000:00:16.2
  79. [ 3.366809] hub 3-0:1.0: USB hub found
  80. [ 3.366819] hub 3-0:1.0: 4 ports detected
  81. [ 3.366976] ehci-platform: EHCI generic platform driver
  82. [ 3.366988] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  83. [ 3.366989] ohci-pci: OHCI PCI platform driver
  84. [ 3.367216] ohci-pci 0000:00:12.0: OHCI PCI host controller
  85. [ 3.367221] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
  86. [ 3.367250] ohci-pci 0000:00:12.0: irq 18, io mem 0xf044d000
  87. [ 3.426419] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  88. [ 3.426424] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  89. [ 3.426426] usb usb4: Product: OHCI PCI host controller
  90. [ 3.426428] usb usb4: Manufacturer: Linux 3.13.0-63-generic ohci_hcd
  91. [ 3.426430] usb usb4: SerialNumber: 0000:00:12.0
  92. [ 3.426804] hub 4-0:1.0: USB hub found
  93. [ 3.426817] hub 4-0:1.0: 5 ports detected
  94. [ 3.427128] ohci-pci 0000:00:13.0: OHCI PCI host controller
  95. [ 3.427134] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
  96. [ 3.427151] ohci-pci 0000:00:13.0: irq 18, io mem 0xf044b000
  97. [ 3.486427] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  98. [ 3.486432] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  99. [ 3.486435] usb usb5: Product: OHCI PCI host controller
  100. [ 3.486436] usb usb5: Manufacturer: Linux 3.13.0-63-generic ohci_hcd
  101. [ 3.486438] usb usb5: SerialNumber: 0000:00:13.0
  102. [ 3.486802] hub 5-0:1.0: USB hub found
  103. [ 3.486815] hub 5-0:1.0: 5 ports detected
  104. [ 3.487122] ohci-pci 0000:00:16.0: OHCI PCI host controller
  105. [ 3.487129] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
  106. [ 3.487148] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0449000
  107. [ 3.536389] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  108. [ 3.536398] ACPI: Battery Slot [BAT0] (battery present)
  109. [ 3.546333] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  110. [ 3.546339] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  111. [ 3.546341] usb usb6: Product: OHCI PCI host controller
  112. [ 3.546342] usb usb6: Manufacturer: Linux 3.13.0-63-generic ohci_hcd
  113. [ 3.546344] usb usb6: SerialNumber: 0000:00:16.0
  114. [ 3.546597] hub 6-0:1.0: USB hub found
  115. [ 3.546610] hub 6-0:1.0: 4 ports detected
  116. [ 3.546769] ohci-platform: OHCI generic platform driver
  117. [ 3.546780] uhci_hcd: USB Universal Host Controller Interface driver
  118. [ 3.546890] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  119. [ 3.565216] serio: i8042 KBD port at 0x60,0x64 irq 1
  120. [ 3.565224] serio: i8042 AUX port at 0x60,0x64 irq 12
  121. [ 3.565633] mousedev: PS/2 mouse device common for all mice
  122. [ 3.566248] rtc_cmos 00:04: RTC can wake from S4
  123. [ 3.566379] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  124. [ 3.566409] rtc_cmos 00:04: alarms up to one month, 114 bytes nvram, hpet irqs
  125. [ 3.566476] device-mapper: uevent: version 1.0.3
  126. [ 3.566557] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
  127. [ 3.566564] ledtrig-cpu: registered to indicate activity on CPUs
  128. [ 3.566672] TCP: cubic registered
  129. [ 3.566783] NET: Registered protocol family 10
  130. [ 3.567005] NET: Registered protocol family 17
  131. [ 3.567017] Key type dns_resolver registered
  132. [ 3.567451] Loading compiled-in X.509 certificates
  133. [ 3.568903] Loaded X.509 cert 'Magrathea: Glacier signing key: e253281fe265ee3ceafcaa3f292e212b95f0359a'
  134. [ 3.568922] registered taskstats version 1
  135. [ 3.572641] Key type trusted registered
  136. [ 3.576788] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  137. [ 3.577716] Key type encrypted registered
  138. [ 3.577722] AppArmor: AppArmor sha1 policy hashing enabled
  139. [ 3.577726] IMA: No TPM chip found, activating TPM-bypass!
  140. [ 3.578126] regulator-dummy: disabling
  141. [ 3.578318] Magic number: 0:310:303
  142. [ 3.578352] tty tty32: hash matches
  143. [ 3.578443] rtc_cmos 00:04: setting system clock to 2016-01-29 23:17:49 UTC (1454109469)
  144. [ 3.578589] acpi-cpufreq: overriding BIOS provided _PSD data
  145. [ 3.579035] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  146. [ 3.579036] EDD information not available.
  147. [ 3.579078] PM: Hibernation image not present or could not be loaded.
  148. [ 3.580905] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
  149. [ 3.580908] Write protecting the kernel read-only data: 12288k
  150. [ 3.584212] Freeing unused kernel memory: 784K (ffff88000173c000 - ffff880001800000)
  151. [ 3.590314] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
  152. [ 3.612808] systemd-udevd[117]: starting version 204
  153. [ 3.710435] usb 1-3: new high-speed USB device number 3 using ehci-pci
  154. [ 3.733417] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
  155. [ 3.747242] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  156. [ 3.747254] ahci 0000:00:11.0: version 3.0
  157. [ 3.766553] rtsx_pci 0000:04:00.0: irq 41 for MSI/MSI-X
  158. [ 3.766618] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
  159. [ 3.767391] wmi: Mapper loaded
  160. [ 3.767473] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
  161. [ 3.767705] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc90004e5a000, ec:9a:74:5d:ab:1e, XID 00a00000 IRQ 43
  162. [ 3.774873] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
  163. [ 3.774949] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  164. [ 3.774954] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
  165. [ 3.787764] acpi device:01: registered as cooling_device4
  166. [ 3.787932] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
  167. [ 3.788041] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
  168. [ 3.788105] scsi0 : ahci
  169. [ 3.788306] scsi1 : ahci
  170. [ 3.788387] ata1: SATA max UDMA/133 abar m2048@0xf044e000 port 0xf044e100 irq 42
  171. [ 3.788391] ata2: SATA max UDMA/133 abar m2048@0xf044e000 port 0xf044e180 irq 42
  172. [ 3.802303] acpi device:07: registered as cooling_device5
  173. [ 3.802381] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6
  174. [ 3.887193] usb 1-3: New USB device found, idVendor=05c8, idProduct=021e
  175. [ 3.887206] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
  176. [ 3.887212] usb 1-3: Product: HP Webcam-101
  177. [ 3.887216] usb 1-3: Manufacturer: HP Webcam-101
  178. [ 3.887221] usb 1-3: SerialNumber: HP Webcam-101
  179. [ 4.130500] usb 2-2: new high-speed USB device number 2 using ehci-pci
  180. [ 4.142496] tsc: Refined TSC clocksource calibration: 1497.277 MHz
  181. [ 4.264182] usb 2-2: New USB device found, idVendor=0bc2, idProduct=5021
  182. [ 4.264194] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  183. [ 4.264200] usb 2-2: Product: FreeAgent GoFlex
  184. [ 4.264205] usb 2-2: Manufacturer: Seagate
  185. [ 4.264209] usb 2-2: SerialNumber: NA02KLWX
  186. [ 4.268414] usb-storage 2-2:1.0: USB Mass Storage device detected
  187. [ 4.268800] scsi2 : usb-storage 2-2:1.0
  188. [ 4.268910] usbcore: registered new interface driver usb-storage
  189. [ 4.278566] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  190. [ 4.278600] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  191. [ 4.280641] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
  192. [ 4.280653] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  193. [ 4.282919] ata1.00: configured for UDMA/100
  194. [ 4.283209] ata2.00: ATAPI: hp CDDVDW SN-208BB, HH01, max UDMA/100
  195. [ 4.283498] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
  196. [ 4.283736] sd 0:0:0:0: Attached scsi generic sg0 type 0
  197. [ 4.283746] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  198. [ 4.283749] sd 0:0:0:0: [sda] 4096-byte physical blocks
  199. [ 4.284003] sd 0:0:0:0: [sda] Write Protect is off
  200. [ 4.284009] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  201. [ 4.284196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  202. [ 4.285666] ata2.00: configured for UDMA/100
  203. [ 4.294352] scsi 1:0:0:0: CD-ROM hp CDDVDW SN-208BB HH01 PQ: 0 ANSI: 5
  204. [ 4.308815] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  205. [ 4.308820] cdrom: Uniform CD-ROM driver Revision: 3.20
  206. [ 4.309206] sr 1:0:0:0: Attached scsi CD-ROM sr0
  207. [ 4.309354] sr 1:0:0:0: Attached scsi generic sg1 type 5
  208. [ 4.343828] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
  209. [ 4.345715] sd 0:0:0:0: [sda] Attached SCSI disk
  210. [ 4.786587] usb 6-1: new full-speed USB device number 2 using ohci-pci
  211. [ 4.955707] usb 6-1: New USB device found, idVendor=0cf3, idProduct=311d
  212. [ 4.955719] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  213. [ 4.955726] usb 6-1: Product: Bluetooth USB Host Controller
  214. [ 4.955731] usb 6-1: Manufacturer: Atheros Communications
  215. [ 4.955735] usb 6-1: SerialNumber: Alaska Day 2006
  216. [ 5.094626] usb 4-1: new low-speed USB device number 2 using ohci-pci
  217. [ 5.143001] Switched to clocksource tsc
  218. [ 5.263947] usb 4-1: New USB device found, idVendor=093a, idProduct=2510
  219. [ 5.263960] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  220. [ 5.263966] usb 4-1: Product: USB Optical Mouse
  221. [ 5.263971] usb 4-1: Manufacturer: PixArt
  222. [ 5.267237] scsi 2:0:0:0: Direct-Access Seagate FreeAgent GoFlex 0148 PQ: 0 ANSI: 4
  223. [ 5.267613] sd 2:0:0:0: Attached scsi generic sg2 type 0
  224. [ 5.269059] sd 2:0:0:0: [sdb] 1465149167 512-byte logical blocks: (750 GB/698 GiB)
  225. [ 5.269596] sd 2:0:0:0: [sdb] Write Protect is off
  226. [ 5.269599] sd 2:0:0:0: [sdb] Mode Sense: 1c 00 00 00
  227. [ 5.269855] hidraw: raw HID events driver (C) Jiri Kosina
  228. [ 5.270304] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  229. [ 5.275469] sdb: sdb1
  230. [ 5.276915] usbcore: registered new interface driver usbhid
  231. [ 5.276919] usbhid: USB HID core driver
  232. [ 5.278823] sd 2:0:0:0: [sdb] Attached SCSI disk
  233. [ 5.278868] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input7
  234. [ 5.279042] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.0-1/input0
  235. [ 5.457071] random: nonblocking pool is initialized
  236. [ 6.455702] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
  237. [ 19.120920] Adding 2073236k swap on /dev/sda6. Priority:-1 extents:1 across:2073236k FS
  238. [ 19.179765] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  239. [ 19.264534] systemd-udevd[320]: starting version 204
  240. [ 19.410562] lp: driver loaded but no devices found
  241. [ 19.420529] ppdev: user-space parallel port driver
  242. [ 19.491588] Initializing HPQ6001 module
  243. [ 19.491673] input: HP Wireless hotkeys as /devices/virtual/input/input8
  244. [ 19.516581] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
  245. [ 19.516587] AMD IOMMUv2 functionality not available on this system
  246. [ 19.525808] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
  247. [ 19.525816] Disabling lock debugging due to kernel taint
  248. [ 19.528021] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  249. [ 19.542258] fglrx: module verification failed: signature and/or required key missing - tainting kernel
  250. [ 19.543795] cfg80211: Calling CRDA to update world regulatory domain
  251. [ 19.555699] <6>[fglrx] Maximum main memory to use for locked dma buffers: 5254 MBytes.
  252. [ 19.555880] <6>[fglrx] vendor: 1002 device: 9647 revision: 0 count: 1
  253. [ 19.556279] <6>[fglrx] vendor: 1002 device: 6760 revision: 0 count: 2
  254. [ 19.557537] <6>[fglrx] ioport: bar 1, base 0x4000, size: 0x100
  255. [ 19.558083] <6>[fglrx] ioport: bar 4, base 0x3000, size: 0x100
  256. [ 19.558091] pci 0000:01:00.0: enabling device (0000 -> 0003)
  257. [ 19.558381] <6>[fglrx] Kernel PAT support is enabled
  258. [ 19.558420] <6>[fglrx] module loaded - fglrx 15.20.2 [Feb 27 2015] with 2 minors
  259. [ 19.582949] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20131115/utaddress-251)
  260. [ 19.582959] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  261. [ 19.611321] ath: phy0: ASPM enabled: 0x43
  262. [ 19.611328] ath: EEPROM regdomain: 0x60
  263. [ 19.611330] ath: EEPROM indicates we should expect a direct regpair map
  264. [ 19.611334] ath: Country alpha2 being used: 00
  265. [ 19.611336] ath: Regpair used: 0x60
  266. [ 19.625676] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  267. [ 19.626736] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90005600000, irq=16
  268. [ 19.656344] kvm: disabled by bios
  269. [ 19.666731] hda-intel 0000:00:01.1: Using LPIB position fix
  270. [ 19.666783] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X
  271. [ 19.672209] hda-intel 0000:00:01.1: Enable sync_write for stable communication
  272. [ 19.677488] type=1400 audit(1454091485.592:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=379 comm="apparmor_parser"
  273. [ 19.677500] type=1400 audit(1454091485.592:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=379 comm="apparmor_parser"
  274. [ 19.677507] type=1400 audit(1454091485.592:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=379 comm="apparmor_parser"
  275. [ 19.678334] type=1400 audit(1454091485.592:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=379 comm="apparmor_parser"
  276. [ 19.678343] type=1400 audit(1454091485.592:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=379 comm="apparmor_parser"
  277. [ 19.678780] type=1400 audit(1454091485.592:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=379 comm="apparmor_parser"
  278. [ 19.682100] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
  279. [ 19.682627] hda-intel 0000:00:14.2: Using LPIB position fix
  280. [ 19.692453] hda-intel 0000:00:14.2: Enable sync_write for stable communication
  281. [ 19.705545] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
  282. [ 19.705552] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  283. [ 19.705555] hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
  284. [ 19.705557] mono: mono_out=0x0
  285. [ 19.705558] inputs:
  286. [ 19.705561] Internal Mic=0x11
  287. [ 19.705563] Mic=0xc
  288. [ 19.720187] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
  289. [ 19.720288] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
  290. [ 19.757473] input: HP WMI hotkeys as /devices/virtual/input/input13
  291. [ 19.940922] cfg80211: World regulatory domain updated:
  292. [ 19.940928] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  293. [ 19.940930] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  294. [ 19.940932] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  295. [ 19.940933] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  296. [ 19.940935] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  297. [ 19.940936] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  298. [ 20.455739] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4828]
  299. [ 20.534322] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1678, fw id: 706628
  300. [ 20.583863] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
  301. [ 20.685780] Bluetooth: Core ver 2.17
  302. [ 20.685821] NET: Registered protocol family 31
  303. [ 20.685823] Bluetooth: HCI device and connection manager initialized
  304. [ 20.685834] Bluetooth: HCI socket layer initialized
  305. [ 20.685836] Bluetooth: L2CAP socket layer initialized
  306. [ 20.685840] Bluetooth: SCO socket layer initialized
  307. [ 20.816229] usbcore: registered new interface driver btusb
  308. [ 20.817961] usbcore: registered new interface driver ath3k
  309. [ 20.856680] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
  310. [ 21.084216] Linux video capture interface: v2.00
  311. [ 21.177975] uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e)
  312. [ 21.192955] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input14
  313. [ 21.193089] usbcore: registered new interface driver uvcvideo
  314. [ 21.193091] USB Video Class driver (1.1.1)
  315. [ 21.386030] init: failsafe main process (713) killed by TERM signal
  316. [ 21.719176] type=1400 audit(1454091487.632:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=788 comm="apparmor_parser"
  317. [ 21.719186] type=1400 audit(1454091487.632:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=788 comm="apparmor_parser"
  318. [ 21.719882] type=1400 audit(1454091487.632:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=788 comm="apparmor_parser"
  319. [ 21.807182] Bluetooth: RFCOMM TTY layer initialized
  320. [ 21.807201] Bluetooth: RFCOMM socket layer initialized
  321. [ 21.807215] Bluetooth: RFCOMM ver 1.11
  322. [ 21.927632] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  323. [ 21.927637] Bluetooth: BNEP filters: protocol multicast
  324. [ 21.927649] Bluetooth: BNEP socket layer initialized
  325. [ 22.204454] init: cups main process (789) killed by HUP signal
  326. [ 22.204466] init: cups main process ended, respawning
  327. [ 22.298538] type=1400 audit(1454091488.212:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=869 comm="apparmor_parser"
  328. [ 22.983366] init: network-manager main process (924) killed by SEGV signal
  329. [ 22.983380] init: network-manager main process ended, respawning
  330. [ 22.997168] init: network-manager main process (928) killed by SEGV signal
  331. [ 22.997181] init: network-manager main process ended, respawning
  332. [ 23.013957] init: network-manager main process (932) killed by SEGV signal
  333. [ 23.013970] init: network-manager main process ended, respawning
  334. [ 23.030738] init: network-manager main process (936) killed by SEGV signal
  335. [ 23.030752] init: network-manager main process ended, respawning
  336. [ 23.051180] init: network-manager main process (940) killed by SEGV signal
  337. [ 23.051199] init: network-manager main process ended, respawning
  338. [ 23.068517] init: network-manager main process (944) killed by SEGV signal
  339. [ 23.068535] init: network-manager main process ended, respawning
  340. [ 23.087107] init: network-manager main process (948) killed by SEGV signal
  341. [ 23.087126] init: network-manager main process ended, respawning
  342. [ 23.312067] init: network-manager main process (1017) killed by SEGV signal
  343. [ 23.312087] init: network-manager main process ended, respawning
  344. [ 23.351364] init: network-manager main process (1069) killed by SEGV signal
  345. [ 23.351383] init: network-manager main process ended, respawning
  346. [ 23.604257] init: network-manager main process (1102) killed by SEGV signal
  347. [ 23.604276] init: network-manager main process ended, respawning
  348. [ 23.626458] init: network-manager main process (1121) killed by SEGV signal
  349. [ 23.626479] init: network-manager respawning too fast, stopped
  350. [ 24.188080] init: samba-ad-dc main process (1092) terminated with status 1
  351. [ 24.935604] Non-volatile memory driver v1.3
  352. [ 26.089099] fglrx_pci 0000:00:01.0: irq 45 for MSI/MSI-X
  353. [ 26.090459] <6>[fglrx] Firegl kernel thread PID: 1344
  354. [ 26.090889] <6>[fglrx] Firegl kernel thread PID: 1345
  355. [ 26.091231] <6>[fglrx] Firegl kernel thread PID: 1346
  356. [ 26.091380] <6>[fglrx] IRQ 45 Enabled
  357. [ 26.096639] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
  358. [ 26.096641] <6>[fglrx] Reserved FB block: Unshared offset:fab4000, size:4000
  359. [ 26.096642] <6>[fglrx] Reserved FB block: Unshared offset:fab8000, size:548000
  360. [ 26.096644] <6>[fglrx] Reserved FB block: Unshared offset:1fff3000, size:d000
  361. [ 26.174051] vgaarb: this pci device is not a vga device
  362. [ 26.174073] vgaarb: this pci device is not a vga device
  363. [ 26.174084] vgaarb: this pci device is not a vga device
  364. [ 26.174094] vgaarb: this pci device is not a vga device
  365. [ 26.174103] vgaarb: this pci device is not a vga device
  366. [ 26.174113] vgaarb: this pci device is not a vga device
  367. [ 26.174124] vgaarb: this pci device is not a vga device
  368. [ 26.174135] vgaarb: this pci device is not a vga device
  369. [ 26.174145] vgaarb: this pci device is not a vga device
  370. [ 26.174155] vgaarb: this pci device is not a vga device
  371. [ 26.174166] vgaarb: this pci device is not a vga device
  372. [ 26.174177] vgaarb: this pci device is not a vga device
  373. [ 26.174187] vgaarb: this pci device is not a vga device
  374. [ 26.174198] vgaarb: this pci device is not a vga device
  375. [ 26.174210] vgaarb: this pci device is not a vga device
  376. [ 26.174222] vgaarb: this pci device is not a vga device
  377. [ 26.174233] vgaarb: this pci device is not a vga device
  378. [ 26.174245] vgaarb: this pci device is not a vga device
  379. [ 26.174257] vgaarb: this pci device is not a vga device
  380. [ 26.174269] vgaarb: this pci device is not a vga device
  381. [ 26.174281] vgaarb: this pci device is not a vga device
  382. [ 26.174294] vgaarb: this pci device is not a vga device
  383. [ 26.174306] vgaarb: this pci device is not a vga device
  384. [ 26.174319] vgaarb: this pci device is not a vga device
  385. [ 26.174331] vgaarb: this pci device is not a vga device
  386. [ 26.174352] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
  387. [ 26.174375] vgaarb: this pci device is not a vga device
  388. [ 26.174389] vgaarb: this pci device is not a vga device
  389. [ 26.174404] vgaarb: this pci device is not a vga device
  390. [ 27.746260] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
  391. [ 27.747380] <6>[fglrx] Firegl kernel thread PID: 1390
  392. [ 27.747725] <6>[fglrx] Firegl kernel thread PID: 1391
  393. [ 27.748152] <6>[fglrx] Firegl kernel thread PID: 1392
  394. [ 27.748320] <6>[fglrx] IRQ 46 Enabled
  395. [ 27.793705] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
  396. [ 27.793711] <6>[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
  397. [ 27.793713] <6>[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
  398. [ 27.793715] <6>[fglrx] Reserved FB block: Unshared offset:3fff3000, size:d000
  399. [ 27.867267] <6>[fglrx] ATIF platform detected with notification ID: 0x81
  400. [ 27.941638] <6>[fglrx] ATIF platform detected with notification ID: 0x81
  401. [ 29.368935] init: plymouth-upstart-bridge main process ended, respawning
  402. [ 51.853960] audit_printk_skb: 161 callbacks suppressed
  403. [ 51.853965] type=1400 audit(1454091517.764:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2541 comm="apparmor_parser"
  404. [ 51.853974] type=1400 audit(1454091517.764:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2541 comm="apparmor_parser"
  405. [ 51.854483] type=1400 audit(1454091517.764:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2541 comm="apparmor_parser"
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!