API tools faq
paste
Advertisement
superelchi

NSA310S ZyxelOS boot

superelchi
Jul 17th, 2015
399
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 40.94 KB | None | 0 0
raw download clone embed print report
  1.  
  2. __ __ _ _
  3. | \/ | __ _ _ ____ _____| | |
  4. | |\/| |/ _` | '__\ \ / / _ \ | |
  5. | | | | (_| | | \ V / __/ | |
  6. |_| |_|\__,_|_| \_/ \___|_|_|
  7. _ _ ____ _
  8. | | | | | __ ) ___ ___ | |_
  9. | | | |___| _ \ / _ \ / _ \| __|
  10. | |_| |___| |_) | (_) | (_) | |_
  11. \___/ |____/ \___/ \___/ \__|
  12. ** MARVELL BOARD: DB6702A-GMtech LE
  13.  
  14. U-Boot 1.1.4 (May 28 2013 - 16:07:08) Marvell version: 3.6.0
  15.  
  16. U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00
  17.  
  18. Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz
  19. SysClock = 400Mhz , TClock = 166Mhz
  20.  
  21. DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
  22. DRAM CS[0] base 0x00000000 size 256MB
  23. DRAM Total size 256MB 16bit width
  24. Addresses 10M - 0M are saved for the U-Boot usage.
  25. Mem malloc Initialization (10M - 7M): Done
  26. NAND:128 MB
  27. Flash: 0 kB
  28.  
  29. CPU : Marvell Feroceon (Rev 1)
  30. Kernel address is 0x4640000.
  31.  
  32. Streaming disabled
  33. Write allocate disabled
  34.  
  35.  
  36. USB 0: host mode
  37. PEX 0: interface detected no Link.
  38. Net: egiga0 [PRIME]
  39. Hit any key to stop autoboot: 5  4  3  2  1  0
  40. (Re)start USB...
  41. USB: scanning bus for devices... 2 USB Device(s) found
  42. Waiting for storage device(s) to settle before scanning...
  43. 0 Storage Device(s) found
  44. ** Bad partition 1 **
  45. ** Bad partition 1 **
  46. ## Booting image at 00800000 ...
  47. Bad Magic Number
  48. Erasing Nand...Writing to Nand... done
  49. __ __ _ _
  50. | \/ | __ _ _ ____ _____| | |
  51. | |\/| |/ _` | '__\ \ / / _ \ | |
  52. | | | | (_| | | \ V / __/ | |
  53. |_| |_|\__,_|_| \_/ \___|_|_|
  54. _ _ ____ _
  55. | | | | | __ ) ___ ___ | |_
  56. | | | |___| _ \ / _ \ / _ \| __|
  57. | |_| |___| |_) | (_) | (_) | |_
  58. \___/ |____/ \___/ \___/ \__|
  59. ** MARVELL BOARD: DB6702A-GMtech LE
  60.  
  61. U-Boot 1.1.4 (May 28 2013 - 16:07:08) Marvell version: 3.6.0
  62.  
  63. U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00
  64.  
  65. Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz
  66. SysClock = 400Mhz , TClock = 166Mhz
  67.  
  68. DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
  69. DRAM CS[0] base 0x00000000 size 256MB
  70. DRAM Total size 256MB 16bit width
  71. Addresses 10M - 0M are saved for the U-Boot usage.
  72. Mem malloc Initialization (10M - 7M): Done
  73. NAND:128 MB
  74. Flash: 0 kB
  75.  
  76. CPU : Marvell Feroceon (Rev 1)
  77. Kernel address is 0xc80000.
  78. Erasing Nand...Writing to Nand... done
  79.  
  80. Streaming disabled
  81. Write allocate disabled
  82.  
  83.  
  84. USB 0: host mode
  85. PEX 0: interface detected no Link.
  86. Net: egiga0 [PRIME]
  87. Hit any key to stop autoboot: 5  4  3  2  1  0
  88. (Re)start USB...
  89. USB: scanning bus for devices... 2 USB Device(s) found
  90. Waiting for storage device(s) to settle before scanning...
  91. 0 Storage Device(s) found
  92. ** Bad partition 1 **
  93. ** Bad partition 1 **
  94. ## Booting image at 00800000 ...
  95. Bad Magic Number
  96.  
  97. NAND read: device 0 offset 0xc80000, size 0xa00000
  98.  
  99.  
  100. Bad block at 0xc80000 in erase block from 0xc80000 will be skipped
  101.  
  102. Reading data from 0xca0000 -- 0% complete.
  103. Reading data from 0xcb9800 -- 1% complete.
  104. Reading data from 0xcd3000 -- 2% complete.
  105. Reading data from 0xcec800 -- 3% complete.
  106. Reading data from 0xd06000 -- 4% complete.
  107. Reading data from 0xd1f800 -- 5% complete.
  108. Reading data from 0xd39800 -- 6% complete.
  109. Reading data from 0xd53000 -- 7% complete.
  110. Reading data from 0xd6c800 -- 8% complete.
  111. Reading data from 0xd86000 -- 9% complete.
  112. Reading data from 0xd9f800 -- 10% complete.
  113. Reading data from 0xdb9800 -- 11% complete.
  114. Reading data from 0xdd3000 -- 12% complete.
  115. Reading data from 0xdec800 -- 13% complete.
  116. Reading data from 0xe06000 -- 14% complete.
  117. Reading data from 0xe1f800 -- 15% complete.
  118. Reading data from 0xe39800 -- 16% complete.
  119. Reading data from 0xe53000 -- 17% complete.
  120. Reading data from 0xe6c800 -- 18% complete.
  121. Reading data from 0xe86000 -- 19% complete.
  122. Reading data from 0xe9f800 -- 20% complete.
  123. Reading data from 0xeb9800 -- 21% complete.
  124. Reading data from 0xed3000 -- 22% complete.
  125. Reading data from 0xeec800 -- 23% complete.
  126. Reading data from 0xf06000 -- 24% complete.
  127. Reading data from 0xf1f800 -- 25% complete.
  128. Reading data from 0xf39800 -- 26% complete.
  129. Reading data from 0xf53000 -- 27% complete.
  130. Reading data from 0xf6c800 -- 28% complete.
  131. Reading data from 0xf86000 -- 29% complete.
  132. Reading data from 0xf9f800 -- 30% complete.
  133. Reading data from 0xfb9800 -- 31% complete.
  134. Reading data from 0xfd3000 -- 32% complete.
  135. Reading data from 0xfec800 -- 33% complete.
  136. Reading data from 0x1006000 -- 34% complete.
  137. Reading data from 0x101f800 -- 35% complete.
  138. Reading data from 0x1039800 -- 36% complete.
  139. Reading data from 0x1053000 -- 37% complete.
  140. Reading data from 0x106c800 -- 38% complete.
  141. Reading data from 0x1086000 -- 39% complete.
  142. Reading data from 0x109f800 -- 40% complete.
  143. Reading data from 0x10b9800 -- 41% complete.
  144. Reading data from 0x10d3000 -- 42% complete.
  145. Reading data from 0x10ec800 -- 43% complete.
  146. Reading data from 0x1106000 -- 44% complete.
  147. Reading data from 0x111f800 -- 45% complete.
  148. Reading data from 0x1139800 -- 46% complete.
  149. Reading data from 0x1153000 -- 47% complete.
  150. Reading data from 0x116c800 -- 48% complete.
  151. Reading data from 0x1186000 -- 49% complete.
  152. Reading data from 0x119f800 -- 50% complete.
  153. Reading data from 0x11b9800 -- 51% complete.
  154. Reading data from 0x11d3000 -- 52% complete.
  155. Reading data from 0x11ec800 -- 53% complete.
  156. Reading data from 0x1206000 -- 54% complete.
  157. Reading data from 0x121f800 -- 55% complete.
  158. Reading data from 0x1239800 -- 56% complete.
  159. Reading data from 0x1253000 -- 57% complete.
  160. Reading data from 0x126c800 -- 58% complete.
  161. Reading data from 0x1286000 -- 59% complete.
  162. Reading data from 0x129f800 -- 60% complete.
  163. Reading data from 0x12b9800 -- 61% complete.
  164. Reading data from 0x12d3000 -- 62% complete.
  165. Reading data from 0x12ec800 -- 63% complete.
  166. Reading data from 0x1306000 -- 64% complete.
  167. Reading data from 0x131f800 -- 65% complete.
  168. Reading data from 0x1339800 -- 66% complete.
  169. Reading data from 0x1353000 -- 67% complete.
  170. Reading data from 0x136c800 -- 68% complete.
  171. Reading data from 0x1386000 -- 69% complete.
  172. Reading data from 0x139f800 -- 70% complete.
  173. Reading data from 0x13b9800 -- 71% complete.
  174. Reading data from 0x13d3000 -- 72% complete.
  175. Reading data from 0x13ec800 -- 73% complete.
  176. Reading data from 0x1406000 -- 74% complete.
  177. Reading data from 0x141f800 -- 75% complete.
  178. Reading data from 0x1439800 -- 76% complete.
  179. Reading data from 0x1453000 -- 77% complete.
  180. Reading data from 0x146c800 -- 78% complete.
  181. Reading data from 0x1486000 -- 79% complete.
  182. Reading data from 0x149f800 -- 80% complete.
  183. Reading data from 0x14b9800 -- 81% complete.
  184. Reading data from 0x14d3000 -- 82% complete.
  185. Reading data from 0x14ec800 -- 83% complete.
  186. Reading data from 0x1506000 -- 84% complete.
  187. Reading data from 0x151f800 -- 85% complete.
  188. Reading data from 0x1539800 -- 86% complete.
  189. Reading data from 0x1553000 -- 87% complete.
  190. Reading data from 0x156c800 -- 88% complete.
  191. Reading data from 0x1586000 -- 89% complete.
  192. Reading data from 0x159f800 -- 90% complete.
  193. Reading data from 0x15b9800 -- 91% complete.
  194. Reading data from 0x15d3000 -- 92% complete.
  195. Reading data from 0x15ec800 -- 93% complete.
  196. Reading data from 0x1606000 -- 94% complete.
  197. Reading data from 0x161f800 -- 95% complete.
  198. Reading data from 0x1639800 -- 96% complete.
  199. Reading data from 0x1653000 -- 97% complete.
  200. Reading data from 0x166c800 -- 98% complete.
  201. Reading data from 0x1686000 -- 99% complete.
  202. Reading data from 0x169f800 -- 100% complete.
  203. 10485760 bytes read: OK
  204. ## Booting image at 02000000 ...
  205. Image Name: Linux-2.6.31.8
  206. Created: 2014-02-07 6:36:50 UTC
  207. Image Type: ARM Linux Kernel Image (uncompressed)
  208. Data Size: 5915036 Bytes = 5.6 MB
  209. Load Address: 00008000
  210. Entry Point: 00008000
  211. Verifying Checksum ... OK
  212. OK
  213.  
  214. Starting kernel ...
  215.  
  216. Uncompressing Linux.............................................................................................................................................................................................................................................................................................. done, booting the kernel.
  217.  
  218. Linux version 2.6.31.8 (root@nasbuilder-desktop) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #2 Fri Feb 7 14:36:45 CST 2014
  219. CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
  220. CPU: VIVT data cache, VIVT instruction cache
  221. Machine: Feroceon-KW
  222. Using UBoot passing parameters structure
  223. Memory policy: ECC disabled, Data cache writeback
  224. Built 1 zonelists in Zone order, mobility grouping off. Total pages: 65024
  225. Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/nfs rw init=/init
  226. PID hash table entries: 1024 (order: 10, 4096 bytes)
  227. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  228. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  229. Memory: 256MB = 256MB total
  230. Memory: 244352KB available (5996K code, 315K data, 2828K init, 0K highmem)
  231. Hierarchical RCU implementation.
  232. NR_IRQS:128
  233. Console: colour dummy device 80x30
  234. Calibrating delay loop... 992.87 BogoMIPS (lpj=4964352)
  235. Mount-cache hash table entries: 512
  236. CPU: Testing write buffer coherency: ok
  237. NET: Registered protocol family 16
  238. [AndyDBG] start in mv_init
  239. [AndyDBG] kirkwood_l2_init()
  240. Feroceon L2: Enabling L2
  241. Feroceon L2: Cache support initialised.
  242. [AndyDBG] mvBoardEnvInit()[AndyDBG] mvBoardIdGet()= 0xe
  243. [BlueDBG] mvBoardIdGet()= 0xe
  244. [AndyDBG] after serial_initialize
  245. CPU Interface
  246. -------------
  247. SDRAM_CS0 ....base 00000000, size 256MB
  248. SDRAM_CS1 ....disable
  249. SDRAM_CS2 ....disable
  250. SDRAM_CS3 ....disable
  251. PEX0_MEM ....base e0000000, size 128MB
  252. PEX0_IO ....base f2000000, size 1MB
  253. PEX1_MEM ....no such
  254. PEX1_IO ....no such
  255. INTER_REGS ....base f1000000, size 1MB
  256. NFLASH_CS ....base fa000000, size 2MB
  257. SPI_CS ....base f4000000, size 16MB
  258. BOOT_ROM_CS ....no such
  259. DEV_BOOTCS ....no such
  260. CRYPT_ENG ....base f0000000, size 2MB
  261.  
  262. Marvell Development Board (LSP Version KW_LSP_5.1.3_patch30)-- DB-88F6702A-BP Soc: 88F6702 A1 LE
  263.  
  264. Detected Tclk 166666667 and SysClk 400000000
  265. MV Buttons Device Load
  266. Marvell USB EHCI Host controller #0: c8040740
  267. PEX0 interface detected no Link.
  268. PCI: bus0: Fast back to back transfers enabled
  269. mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
  270. bio: create slab <bio-0> at 0
  271. SCSI subsystem initialized
  272. usbcore: registered new interface driver usbfs
  273. usbcore: registered new interface driver hub
  274. usbcore: registered new device driver usb
  275. NET: Registered protocol family 2
  276. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  277. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  278. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  279. TCP: Hash tables configured (established 8192 bind 8192)
  280. TCP reno registered
  281. NET: Registered protocol family 1
  282. RTC has been updated!!!
  283. rtc mv_rtc: rtc core: registered kw-rtc as rtc0
  284. RTC registered
  285. cpufreq: Init kirkwood cpufreq driver
  286. XOR registered 4 channels
  287. XOR 2nd invalidate WA enabled
  288. mvCesaInit: sessions=640, queue=64, pSram=f0000000
  289. Warning: TS unit is powered off.
  290. MV Buttons Driver Load
  291. gpio_dev = fd00000
  292. LED_SET_CTL_IOC_NUM= 6702
  293. High gpio polarity = 1000000
  294. High gpio polarity = 3000000
  295. Enable Interrupt
  296. VFS: Disk quotas dquot_6.5.2
  297. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  298. Installing knfsd (copyright (C) 1996 [email protected]).
  299. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  300. fuse init (API version 7.12)
  301. SGI XFS with security attributes, large block/inode numbers, no debug enabled
  302. SGI XFS Quota Management subsystem
  303. yaffs Feb 7 2014 14:21:35 Installing.
  304. msgmni has been set to 477
  305. alg: No test for cipher_null (cipher_null-generic)
  306. alg: No test for ecb(cipher_null) (ecb-cipher_null)
  307. alg: No test for digest_null (digest_null-generic)
  308. alg: No test for compress_null (compress_null-generic)
  309. alg: No test for stdrng (krng)
  310. alg: No test for hmac(digest_null) (hmac(digest_null-generic))
  311. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  312. io scheduler noop registered
  313. io scheduler cfq registered (default)
  314. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  315. serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
  316. console [ttyS0] enabled
  317. brd: module loaded
  318. loop: module loaded
  319. Integrated Sata device found
  320. IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs
  321. scsi0 : Marvell SCSI to SATA adapter
  322. scsi1 : Marvell SCSI to SATA adapter
  323. EnablePowerSaving
  324. PowerSavingTime = 15
  325. No found HD
  326. Loading Marvell Ethernet Driver:
  327. o Cached descriptors in DRAM
  328. o DRAM SW cache-coherency
  329. o 1 Giga ports supported
  330. o Single RX Queue support - ETH_DEF_RXQ=0
  331. o Single TX Queue support - ETH_DEF_TXQ=0
  332. o TCP segmentation offload (TSO) supported
  333. o Large Receive offload (LRO) supported
  334. o Receive checksum offload supported
  335. o Transmit checksum offload supported
  336. o Network Fast Processing (Routing) supported - (Disabled)
  337. o Driver ERROR statistics enabled
  338. o Proc tool API enabled
  339. o SKB Reuse supported - (Disabled)
  340. o SKB Recycle supported - (Disabled)
  341. o Rx descripors: q0=128
  342. o Tx descripors: q0=532
  343. o Loading network interface(s):
  344. o register under mv88fx_eth platform
  345. o eth0, ifindex = 2, GbE port = 0
  346.  
  347. mvFpRuleDb (c8fd0000): 2048 entries, 8192 bytes
  348. Counter=0, opIdx=6, overhead=16
  349. Counter=1, opIdx=2, overhead=0
  350. Counter=2, opIdx=1, overhead=18
  351. Counter=3, opIdx=2, overhead=0
  352. Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
  353. Copyright (c) 1999-2006 Intel Corporation.
  354. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
  355. e1000e: Copyright (c) 1999-2008 Intel Corporation.
  356. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  357. e100: Copyright(c) 1999-2006 Intel Corporation
  358. NAND device: Manufacturer ID: 0x92, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
  359. Scanning device for bad blocks
  360. Bad eraseblock 100 at 0x000000c80000
  361. Bad eraseblock 200 at 0x000001900000
  362. 9 cmdlinepart partitions found on MTD device nand_mtd
  363. Using command line partition definition
  364. Creating 9 MTD partitions on "nand_mtd":
  365. 0x000000000000-0x000000100000 : "uboot"
  366. 0x000000100000-0x000000180000 : "uboot_env"
  367. 0x000000180000-0x000000200000 : "key_store"
  368. 0x000000200000-0x000000280000 : "info"
  369. 0x000000280000-0x000000c80000 : "etc"
  370. 0x000000c80000-0x000001680000 : "kernel_1"
  371. 0x000001680000-0x000004640000 : "rootfs1"
  372. 0x000004640000-0x000005040000 : "kernel_2"
  373. 0x000005040000-0x000008000000 : "rootfs2"
  374. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  375. ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
  376. ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
  377. ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
  378. ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
  379. usb usb1: configuration #1 chosen from 1 choice
  380. hub 1-0:1.0: USB hub found
  381. hub 1-0:1.0: 1 port detected
  382. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  383. uhci_hcd: USB Universal Host Controller Interface driver
  384. usbcore: registered new interface driver usblp
  385. Initializing USB Mass Storage driver...
  386. usbcore: registered new interface driver usb-storage
  387. USB Mass Storage support registered.
  388. usbcore: registered new interface driver ums-datafab
  389. usbcore: registered new interface driver ums-freecom
  390. usbcore: registered new interface driver ums-jumpshot
  391. usbcore: registered new interface driver ums-sddr09
  392. usbcore: registered new interface driver ums-sddr55
  393. usbcore: registered new interface driver ums-usbat
  394. mice: PS/2 mouse device common for all mice
  395. i2c /dev entries driver
  396. md: linear personality registered for level -1
  397. md: raid0 personality registered for level 0
  398. md: raid1 personality registered for level 1
  399. sdhci: Secure Digital Host Controller Interface driver
  400. sdhci: Copyright(c) Pierre Ossman
  401. mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
  402. usbcore: registered new interface driver hiddev
  403. usbcore: registered new interface driver usbhid
  404. usbhid: v2.6:USB HID core driver
  405. TCP cubic registered
  406. NET: Registered protocol family 10
  407. lo: Disabled Privacy Extensions
  408. Mobile IPv6
  409. IPv6 over IPv4 tunneling driver
  410. sit0: Disabled Privacy Extensions
  411. ip6tnl0: Disabled Privacy Extensions
  412. NET: Registered protocol family 17
  413. RPC: Registered udp transport module.
  414. RPC: Registered tcp transport module.
  415. rtc mv_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  416. Freeing init memory: 2828K
  417. *** Stage 1: Setup system and device drivers ***
  418. usb 1-1: new high speed USB device using ehci_marvell and address 2
  419. In hub_port_init, and number is 0, retry 0, port 1 .....
  420. usb 1-1: configuration #1 chosen from 1 choice
  421. hub 1-1:1.0: USB hub found
  422. hub 1-1:1.0: 4 ports detected
  423. eth0: mac address changed
  424. egiga0: started
  425. ADDRCONF(NETDEV_UP): egiga0: link is not ready
  426. *** Stage 2: Prepare the root file system ***
  427. Mount system partition...
  428. yaffs: dev is 32505862 name is "mtdblock6"
  429. yaffs: passed flags ""
  430. yaffs: Attempting MTD mount on 31.6, "mtdblock6"
  431. block 21 is bad
  432. yaffs_read_super: isCheckpointed 0
  433. storage_gen_mntfw.sh: no internal disk available
  434. 1
  435. WARNING: No valid partition on HDD or no HDD plugged!
  436. WARNING: No valid partition on HDD or no HDD plugged
  437. Boot from RAM disk
  438. Mount system disk image ...
  439. yaffs: dev is 32505860 name is "mtdblock4"
  440. yaffs: passed flags ""
  441. yaffs: Attempting MTD mount on 31.4, "mtdblock4"
  442. yaffs: restored from checkpoint
  443. yaffs_read_super: isCheckpointed 1
  444. /etc/zyxel/conf exist..
  445. /etc/init.d/rcS: line 406: can't create /sys/block/sda/queue/read_ahead_kb: nonexistent directory
  446. Start rcS2 of ZyXEL style
  447. base address = 40151000
  448. words[0] = phypoke
  449. words[1] = 1
  450. words[2] = 16
  451. words[3] = 3
  452. :GbitPhy[0x00000001:0x00000016] <= 0x00000003
  453. base address = 40151000
  454. words[0] = phypoke
  455. words[1] = 1
  456. words[2] = 10
  457. words[3] = 1017
  458. :GbitPhy[0x000egiga0: link up00001:0x00000010, half duplex] <= 0x00001017
  459. , speed 10 Mbps
  460. base address =
  461. 40151000
  462. words[ADDRCONF(NETDEV_CHANGE): egiga0: link becomes ready
  463. 0] = phypoke
  464. words[1] = 1
  465. words[2] = 11
  466. words[3] = 4408
  467. :GbitPhy[0x00000001:0x00000011] <= 0x00004408
  468. Set the phy back to auto-negotiation mode
  469. base address = 40151000
  470. words[0] = phypoke
  471. words[1] = 1
  472. words[2] = 16
  473. words[3] = 0
  474. :GbitPhy[0x00000001:0x00000016] <= 0x00000000
  475. base address = 40151000
  476. words[0] = phypoke
  477. words[1] = 1
  478. words[2] = 4
  479. words[3] = 1e1
  480. :GbitPhy[0x00000001:0x00000004] <= 0x000001e1
  481. base address = 40151000
  482. words[0] = phypoke
  483. words[1] = 1
  484. words[2] = 9
  485. words[3] = 300
  486. :GbitPhy[0x00000001:0x00000009] <= 0x00000300
  487. base address = 40151000
  488. words[0] = phypoke
  489. words[1] = 1
  490. words[2] = 10
  491. words[3] = 3860
  492. :GbitPhy[0x00000001:0egiga0: link down
  493. x00000010] <= 0x00003860
  494. base address = 40151000
  495. words[0] = phypoke
  496. words[1] = 1
  497. words[2] = 0
  498. words[3] = 9140
  499. :GbitPhy[0x00000001:0x00000000] <= 0x00009140
  500. *** Stage 3: Start services on HDD ***
  501. NTFS driver 2.1.29 [Flags: R/O MODULE].
  502. tntfs: module license 'Commercial. For support email [email protected].' taints kernel.
  503. Disabling lock debugging due to kernel taint
  504. Tuxera NTFS driver 3011.12.23 [Flags: R/W MODULE].
  505. PPP generic driver version 2.4.2
  506. PPP MPPE Compression module registered
  507. PPP Deflate Compression module registered
  508. NET: Registered protocol family 24
  509. PPP BSD Compression module registered
  510. modprobe: module fuse not found in modules.dep
  511. egiga0: link up, full duplex, speed 1 Gbps
  512.  
  513. Press ENTER to continue...
  514. Starting zylogd...
  515. zylog starts.
  516. Starting uamd...
  517. Starting ZySH daemon and client...
  518. Start NSA-220 system daemon....
  519. Start ZySH daemon
  520. zyshd: version 2.0.0 (build: 14:17:04 Feb 7 2014)
  521. % zylog init start
  522. cat: can't open '/var/run/syslog-ng.pid': No such file or directory
  523. Try to KILL SIGHUP to syslog-ng: pid=0
  524. syslog-ng not running, start /usr/sbin/syslog-ng
  525. Jul 17 07:41:34 (none) syslog-ng[1478]: syslog-ng starting up; version='2.0.10'
  526. zyio_open_config success. (/etc/__system_default.xml, 0)
  527. zyio_open_config success. (/etc/zyxel/conf/__system_default_device_ha.xml, 0)
  528. /usr/sbin/zic -d /etc /var/zyxel/myzone_rule
  529. /bin/ln -s -f /etc/MyZone /etc/localtime
  530. /bin/hostname NSA310S
  531. Usage: umount [-hV]
  532. umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
  533. umount [-f] [-r] [-n] [-v] special | node...
  534. Usage: umount [-hV]
  535. umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
  536. umount [-f] [-r] [-n] [-v] special | node...
  537. BusyBox v1.17.2 (2014-02-07 14:12:32 CST) multi-call binary.
  538.  
  539. Usage: rmdir [OPTIONS] DIRECTORY...
  540.  
  541. Init SMB DB access...
  542. rm: can't remove '/var/log/samba/smb.db': No such file or directory
  543. Assemble volume....
  544. [1525] server write-only FIFO is opened (fd=6)
  545. [1525] server read-only FIFO is opened (fd=7)
  546. [1525] server error read-only FIFO is opened (fd=8)
  547. argc = 1, func = 280
  548. Startup config
  549. POLLHUP on 7
  550. pid = 1525
  551. [1525] is disconnected
  552. [1663] server write-only FIFO is opened (fd=6)
  553. [1663] server read-only FIFO is opened (fd=7)
  554. [1663] server error read-only FIFO is opened (fd=8)
  555. argc = 1, func = 14
  556. argc = 1, func = 17
  557. argc = 2, func = 105
  558. argid[1]: 1087; argv[1]: ge1
  559. argc = 5, func = 108
  560. argid[1]: 1087; argv[1]: ge1
  561. argid[2]: 313; argv[2]: ip
  562. argid[3]: 434; argv[3]: address
  563. argid[4]: 539; argv[4]: dhcp
  564. killall: httpd: no process killed
  565. Jul 17 07:41:42 (none) httpd[1671]: [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
  566. Jul 17 07:41:42 (none) httpd[1671]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  567. Jul 17 07:41:42 (none) httpd[1671]: [warn] RSA server certificate CommonName (CN) `NSA310S' does NOT match server name!?
  568. Jul 17 07:41:42 (none) httpd[1671]: [error] mod_auth_zyxel: initialized.
  569. argc = 3, func = 106
  570. argid[1]: 1087; argv[1]: ge1
  571. argid[2]: 350; argv[2]: exit
  572. argc = 2, func = 444
  573. argid[1]: 1080; argv[1]: 192.168.27.200
  574. argc = 4, func = 446
  575. argid[1]: 879; argv[1]: fetch
  576. argid[2]: 632; argv[2]: auto
  577. argid[3]: 1087; argv[3]: ge1
  578. Jul 17 07:41:43 (none) httpd[1672]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  579. Jul 17 07:41:43 (none) httpd[1672]: [warn] RSA server certificate CommonName (CN) `NSA310S' does NOT match server name!?
  580. Jul 17 07:41:43 (none) httpd[1672]: [error] mod_auth_zyxel: initialized.
  581. /bin/rm -f /var/zyxel/zysh/egiga0.metric
  582. /bin/ip route del default via 0.0.0.0 dev egiga0
  583. RTNETLINK answers: No such process
  584. Jul 17 07:41:47 (none) dhcpcd[1715]: dhcpT1value is 3600 sec
  585. Jul 17 07:41:47 (none) dhcpcd[1715]: dhcpT2value is 6300 sec
  586. [1677] server write-only FIFO is opened (fd=9)
  587. [1677] server read-only FIFO is opened (fd=10)
  588. [1677] server error read-only FIFO is opened (fd=11)
  589. [1729] server write-only FIFO is opened (fd=12)
  590. [1729] server read-only FIFO is opened (fd=13)
  591. [1729] server error read-only FIFO is opened (fd=14)
  592. argc = 7, func = 77
  593. argid[1]: 267; argv[1]: mail
  594. argid[2]: 1415; argv[2]: 1
  595. argid[3]: 435; argv[3]: category
  596. argid[4]: 375; argv[4]: all
  597. argid[5]: 461; argv[5]: level
  598. argid[6]: 478; argv[6]: alert
  599. argc = 3, func = 447
  600. argid[1]: 1087; argv[1]: ge1
  601. argid[2]: 1080; argv[2]: 192.168.27.200
  602. mail server '1' log_category(all) is:alert
  603. POLLHUP on 13
  604. pid = 1729
  605. [1729] is disconnected
  606. argc = 7, func = 77
  607. argid[1]: 267; argv[1]: mail
  608. argid[2]: 1415; argv[2]: 1
  609. argid[3]: 435; argv[3]: category
  610. argid[4]: 375; argv[4]: all
  611. argid[5]: 461; argv[5]: level
  612. argid[6]: 375; argv[6]: all
  613. mail server '1' log_category(all) is:all
  614. argc = 2, func = 68
  615. argid[1]: 1079; argv[1]: time.stdtime.gov.tw
  616. argc = 2, func = 60
  617. argid[1]: 1130; argv[1]: +0800
  618. /usr/sbin/zic -d /etc /var/zyxel/myzone_rule
  619. /bin/ln -s -f /etc/MyZone /etc/localtime
  620. argc = 1, func = 445
  621. POLLHUP on 10
  622. pid = 1677
  623. [1677] is disconnected
  624. [1736] server write-only FIFO is opened (fd=9)
  625. [1736] server read-only FIFO is opened (fd=10)
  626. [1736] server error read-only FIFO is opened (fd=11)
  627. argc = 1, func = 72
  628. /usr/sbin/ntpdate_agent time.stdtime.gov.tw
  629. argc = 1, func = 448
  630. POLLHUP on 10
  631. pid = 1736
  632. [1736] is disconnected
  633. argc = 1, func = 38
  634. killall: pure-ftpd: no process killed
  635. Usage: umount [-hV]
  636. umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
  637. umount [-f] [-r] [-n] [-v] special | node...
  638. Usage: umount [-hV]
  639. umount -a [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]
  640. umount [-f] [-r] [-n] [-v] special | node...
  641. BusyBox v1.17.2 (2014-02-07 14:12:32 CST) multi-call binary.
  642.  
  643. Usage: rmdir [OPTIONS] DIRECTORY...
  644.  
  645. argc = 2, func = 195
  646. argid[1]: 1140; argv[1]: "admin"
  647. argc = 5, func = 196
  648. argid[1]: 1140; argv[1]: "admin"
  649. argid[2]: 1426; argv[2]: 501
  650. argid[3]: 363; argv[3]: password
  651. argid[4]: 1164; argv[4]: 2848822810E16C51AAD3B435B51404EE:F441F41AA59214CCCC3D4BA5ED1550CC
  652. enter smb_db_update_user
  653. argc = 5, func = 196
  654. argid[1]: 1140; argv[1]: "admin"
  655. argid[2]: 1426; argv[2]: 501
  656. argid[3]: 637; argv[3]: type
  657. argid[4]: 638; argv[4]: admin
  658. enter smb_db_update_user
  659. argc = 5, func = 197
  660. argid[1]: 1140; argv[1]: "admin"
  661. argid[2]: 1426; argv[2]: 501
  662. argid[3]: 642; argv[3]: shpass
  663. argid[4]: 1167; argv[4]: $1$$9rSWmaINP3I0oRPRGR6t31
  664. shpass : $1$$9rSWmaINP3I0oRPRGR6t31
  665. argc = 4, func = 192
  666. argid[1]: 1140; argv[1]: "admin"
  667. argid[2]: 1426; argv[2]: 501
  668. argid[3]: 350; argv[3]: exit
  669. argc = 6, func = 177
  670. argid[1]: 456; argv[1]: share
  671. argid[2]: 630; argv[2]: save
  672. argid[3]: 1169; argv[3]: "public"
  673. argid[4]: 395; argv[4]: path
  674. argid[5]: 1171; argv[5]: "/i-data/md0/public"
  675. folder is not under mount point.
  676. argc = 7, func = 166
  677. argid[1]: 456; argv[1]: share
  678. argid[2]: 630; argv[2]: save
  679. argid[3]: 1169; argv[3]: "public"
  680. argid[4]: 395; argv[4]: path
  681. argid[5]: 1171; argv[5]: "/i-data/md0/public"
  682. argid[6]: 350; argv[6]: exit
  683. share path /i-data/md0/public not existing.
  684. share path /i-data/md0/video not existing.
  685. share path /i-data/md0/photo not existing.
  686. share path /i-data/md0/music not existing.
  687. share path /i-data/md0/admin not existing.
  688. RegenSmbConfigFile:2157 Close file ok
  689. argc = 6, func = 177
  690. argid[1]: 456; argv[1]: share
  691. argid[2]: 630; argv[2]: save
  692. argid[3]: 1169; argv[3]: "video"
  693. argid[4]: 395; argv[4]: path
  694. argid[5]: 1171; argv[5]: "/i-data/md0/video"
  695. folder is not under mount point.
  696. argc = 7, func = 178
  697. argid[1]: 456; argv[1]: share
  698. argid[2]: 630; argv[2]: save
  699. argid[3]: 1169; argv[3]: "video"
  700. argid[4]: 395; argv[4]: path
  701. argid[5]: 1171; argv[5]: "/i-data/md0/video"
  702. argid[6]: 616; argv[6]: media-server
  703. argc = 7, func = 166
  704. argid[1]: 456; argv[1]: share
  705. argid[2]: 630; argv[2]: save
  706. argid[3]: 1169; argv[3]: "video"
  707. argid[4]: 395; argv[4]: path
  708. argid[5]: 1171; argv[5]: "/i-data/md0/video"
  709. argid[6]: 350; argv[6]: exit
  710. share path /i-data/md0/public not existing.
  711. share path /i-data/md0/video not existing.
  712. share path /i-data/md0/photo not existing.
  713. share path /i-data/md0/music not existing.
  714. share path /i-data/md0/admin not existing.
  715. RegenSmbConfigFile:2157 Close file ok
  716. argc = 6, func = 177
  717. argid[1]: 456; argv[1]: share
  718. argid[2]: 630; argv[2]: save
  719. argid[3]: 1169; argv[3]: "photo"
  720. argid[4]: 395; argv[4]: path
  721. argid[5]: 1171; argv[5]: "/i-data/md0/photo"
  722. folder is not under mount point.
  723. argc = 7, func = 178
  724. argid[1]: 456; argv[1]: share
  725. argid[2]: 630; argv[2]: save
  726. argid[3]: 1169; argv[3]: "photo"
  727. argid[4]: 395; argv[4]: path
  728. argid[5]: 1171; argv[5]: "/i-data/md0/photo"
  729. argid[6]: 616; argv[6]: media-server
  730. argc = 7, func = 166
  731. argid[1]: 456; argv[1]: share
  732. argid[2]: 630; argv[2]: save
  733. argid[3]: 1169; argv[3]: "photo"
  734. argid[4]: 395; argv[4]: path
  735. argid[5]: 1171; argv[5]: "/i-data/md0/photo"
  736. argid[6]: 350; argv[6]: exit
  737. share path /i-data/md0/public not existing.
  738. share path /i-data/md0/video not existing.
  739. share path /i-data/md0/photo not existing.
  740. share path /i-data/md0/music not existing.
  741. share path /i-data/md0/admin not existing.
  742. RegenSmbConfigFile:2157 Close file ok
  743. argc = 6, func = 177
  744. argid[1]: 456; argv[1]: share
  745. argid[2]: 630; argv[2]: save
  746. argid[3]: 1169; argv[3]: "music"
  747. argid[4]: 395; argv[4]: path
  748. argid[5]: 1171; argv[5]: "/i-data/md0/music"
  749. folder is not under mount point.
  750. argc = 7, func = 178
  751. argid[1]: 456; argv[1]: share
  752. argid[2]: 630; argv[2]: save
  753. argid[3]: 1169; argv[3]: "music"
  754. argid[4]: 395; argv[4]: path
  755. argid[5]: 1171; argv[5]: "/i-data/md0/music"
  756. argid[6]: 616; argv[6]: media-server
  757. argc = 7, func = 166
  758. argid[1]: 456; argv[1]: share
  759. argid[2]: 630; argv[2]: save
  760. argid[3]: 1169; argv[3]: "music"
  761. argid[4]: 395; argv[4]: path
  762. argid[5]: 1171; argv[5]: "/i-data/md0/music"
  763. argid[6]: 350; argv[6]: exit
  764. share path /i-data/md0/public not existing.
  765. share path /i-data/md0/video not existing.
  766. share path /i-data/md0/photo not existing.
  767. share path /i-data/md0/music not existing.
  768. share path /i-data/md0/admin not existing.
  769. RegenSmbConfigFile:2157 Close file ok
  770. argc = 6, func = 177
  771. argid[1]: 456; argv[1]: share
  772. argid[2]: 630; argv[2]: save
  773. argid[3]: 1169; argv[3]: "admin"
  774. argid[4]: 395; argv[4]: path
  775. argid[5]: 1171; argv[5]: "/i-data/md0/admin"
  776. folder is not under mount point.
  777. argc = 7, func = 166
  778. argid[1]: 456; argv[1]: share
  779. argid[2]: 630; argv[2]: save
  780. argid[3]: 1169; argv[3]: "admin"
  781. argid[4]: 395; argv[4]: path
  782. argid[5]: 1171; argv[5]: "/i-data/md0/admin"
  783. argid[6]: 350; argv[6]: exit
  784. share path /i-data/md0/public not existing.
  785. share path /i-data/md0/video not existing.
  786. share path /i-data/md0/photo not existing.
  787. share path /i-data/md0/music not existing.
  788. share path /i-data/md0/admin not existing.
  789. RegenSmbConfigFile:2157 Close file ok
  790. argc = 4, func = 414
  791. argid[1]: 1250; argv[1]: yes
  792. argid[2]: 1251; argv[2]: yes
  793. argid[3]: 1252; argv[3]: yes
  794. argc = 2, func DisablePowerSaving
  795. = 147
  796. argid[1]:TimerState = 0
  797. 1155; argv[1]: EnablePowerSaving
  798. 15
  799. PowerSavingTime = 15
  800. No found HD
  801. test0
  802. Test1
  803. Test2
  804. Test3:
  805. argc = 2, func = 676
  806. argid[1]: 1087; argv[1]: ge1
  807. Jul 17 15:41:57 (none) httpd[1924]: [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
  808. Jul 17 15:41:57 (none) httpd[1924]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  809. Jul 17 15:41:57 (none) httpd[1924]: [warn] RSA server certificate CommonName (CN) `NSA310S' does NOT match server name!?
  810. Jul 17 15:41:57 (none) httpd[1924]: [error] mod_auth_zyxel: initialized.
  811. argc = 2, func = 161
  812. argid[1]: 1160; argv[1]: g
  813. exec_cmd complete
  814. eth status = g
  815. ethtest0
  816. Test1
  817. Test2
  818. Test3:
  819. argc = 2, func = 163
  820. argid[1]: 1161; argv[1]: enable
  821. argc = 2, func = 18
  822. argid[1]: 350; argv[1]: exit
  823. argc = 1, func = 20
  824. POLLHUP on 7
  825. pid = 1663
  826. [1663] is disconnected
  827. Jul 17 15:42:01 (none) httpd[1939]: [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
  828. Jul 17 15:42:01 (none) httpd[1939]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  829. Jul 17 15:42:01 (none) httpd[1939]: [warn] RSA server certificate CommonName (CN) `NSA310S' does NOT match server name!?
  830. Jul 17 15:42:01 (none) httpd[1939]: [error] mod_auth_zyxel: initialized.
  831. configure terminal ip smb internal disable "/i-data/md0"
  832. [1949] server write-only FIFO is opened (fd=6)
  833. [1949] server read-only FIFO is opened (fd=7)
  834. [1949] server error read-only FIFO is opened (fd=8)
  835. argc = 4, func = 184
  836. argid[1]: 634; argv[1]: internal
  837. argid[2]: 303; argv[2]: disable
  838. argid[3]: 1183; argv[3]: "/i-data/md0"
  839. share path /i-data/md0/public not existing.
  840. share path /i-data/md0/video not existing.
  841. share path /i-data/md0/photo not existing.
  842. share path /i-data/md0/music not existing.
  843. share path /i-data/md0/admin not existing.
  844. RegenSmbConfigFile:2157 Close file ok
  845. no such autosata.
  846. Error happens when deleting autosata.
  847. [1949] is disconnected
  848. configure terminal ip smb internal disable "/i-data/md1"
  849. [1954] server write-only FIFO is opened (fd=6)
  850. [1954] server read-only FIFO is opened (fd=7)
  851. [1954] server error read-only FIFO is opened (fd=8)
  852. argc = 4, func = 184
  853. argid[1]: 634; argv[1]: internal
  854. argid[2]: 303; argv[2]: disable
  855. argid[3]: 1183; argv[3]: "/i-data/md1"
  856. share path /i-data/md0/public not existing.
  857. share path /i-data/md0/video not existing.
  858. share path /i-data/md0/photo not existing.
  859. share path /i-data/md0/music not existing.
  860. share path /i-data/md0/admin not existing.
  861. RegenSmbConfigFile:2157 Close file ok
  862. no such autosata.
  863. Error happens when deleting autosata.
  864. POLLHUP on 7
  865. pid = 1954
  866. [1954] is disconnected
  867. Starting smbd...
  868. Jul 17 15:42:03 (none) ntpdate[1750]: no server suitable for synchronization found
  869. Starting nmbd...
  870. Jul 17 15:42:03 (none) httpd[1940]: [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
  871. Jul 17 15:42:03 (none) httpd[1940]: [warn] RSA server certificate CommonName (CN) `NSA310S' does NOT match server name!?
  872. Jul 17 15:42:03 (none) httpd[1940]: [error] mod_auth_zyxel: initialized.
  873. Starting NSU Agent...
  874. Starting copy auto daylight saving tzfile to /i-data/md0/.system/ ...
  875. cp -a /usr/local/zoneinfo /i-data/md0/.system/
  876. cp: can't create directory '/i-data/md0/.system/': No such file or directory
  877. storage_gen_swap.sh: not enough space to dd swap file
  878. GMT offset=28800s
  879. setting system time zone to tz_minuteswest=-480
  880. mknod: /dev/btncpy: File exists
  881. setLED COPY OFF
  882. led_state_map_addr = 10
  883. [2426] server write-only FIFO is opened (fd=6)
  884. [2426] server read-only FIFO is opened (fd=7)
  885. [2426] server error read-only FIFO is opened (fd=8)
  886. argc = 2, func = 351
  887. argid[1]: 1226; argv[1]: former
  888. POLLHUP on 7
  889. pid = 2426
  890. [2426] is disconnected
  891. schedule_controller is already running now.
  892. Starting "/etc/init.d/zypkg_controller.sh".
  893. Starting to set up zy-pkgs environment ...
  894. -> No volume exists now. zy-pkgs will not work.
  895. sh: you need to specify whom to kill
  896. Jul 17 15:42:08 (none) syslog-ng[1478]: Termination requested via signal, terminating;
  897. Jul 17 15:42:08 (none) syslog-ng[1478]: syslog-ng shutting down; version='2.0.10'
  898. Jul 17 15:42:08 NSA310S syslog-ng[2467]: syslog-ng starting up; version='2.0.10'
  899. rm: can't remove '/i-data/.system/dropbox/dropbox.enable': No such file or directory
  900. mkdir: can't create directory '/i-data/.system/dropbox': No such file or directory
  901. cp: can't create '/i-data/.system/dropbox/dropbox.db': No such file or directory
  902. mkdir: can't create directory '/i-data/md0/.system/web_cache': No such file or directory
  903. mount: special device /i-data/md0/.system/web_cache does not exist
  904. chmod: /i-data/md0/.system/zyxelFrameworkLog: No such file or directory
  905. chmod: /usr/local/apache/web_framework/data/cache: Read-only file system
  906. chmod: /usr/local/apache/web_framework/data/cache: Read-only file system
  907. Web Server already started.
  908. mkdir: can't create directory '/i-data/md0/': No such file or directory
  909. mkdir: can't create directory '/i-data/md0/': No such file or directory
  910. [2489] server write-only FIFO is opened (fd=6)
  911. [2489] server read-only FIFO is opened (fd=7)
  912. [2489] server error read-only FIFO is opened (fd=8)
  913. argc = 1, func = 423
  914. POLLHUP on 7
  915. pid = 2489
  916. [2489] is disconnected
  917. Starting app_wd...
  918.  core_checksum : 54a9748949a91673b27122b78973179d
  919.  fwversion : V4.70(AALH.0)
  920.  img_checksum : 5864cff5e093b4fa85684dc449558ace
  921.  modelid : AD03
  922.  revision : 41128
  923.  romfile_checksum : 4C30
  924.  zld_checksum : e6731ee8684c55c19bca33ee639b1653
  925. GbE port 0: TxEnable WA - Enabled, deep=1, tx_en_bk=1
  926.  
  927. Update zypkg list
  928. [2523] server write-only FIFO is opened (fd=6)
  929. [2523] server read-only FIFO is opened (fd=7)
  930. [2523] server error read-only FIFO is opened (fd=8)
  931. argc = 1, func = 644
  932. led_state_map_addr = 46
  933.  
  934. Please press Enter to activate this console. POLLHUP on 7
  935. pid = 2523
  936. [2523] is disconnected
  937. chmod: /i-data/md0/admin/zy-pkgs: No such file or directory
  938. /usr/lib/python2.6/site-packages/flickrapi/__init__.py:45: DeprecationWarning: the md5 module is deprecated; use hashlib instead
  939. tar: can't create directory 'i-data/md0': No such file or directory
  940. tar: can't make dir i-data/md0/admin: No such file or directory
  941. tar: can't create directory 'i-data/md0/': No such file or directory
  942. tar: can't create directory 'i-data/md0/': No such file or directory
  943. tar: can't remove old file i-data/md0/: Not a directory
  944. tar: write: Broken pipe
  945. chmod: /i-data/md0/admin: No such file or directory
  946. chmod: /i-data/md0/admin/zy-pkgs: No such file or directory
  947. chmod: /i-data/md0/admin/zy-pkgs/*: No such file or directory
  948.  
  949.  
  950.  
  951. BusyBox v1.17.2 (2014-02-07 14:12:32 CST) built-in shell (ash)
  952. Enter 'help' for a list of built-in commands.
  953.  
  954. / # Jul 17 07:42:29 NSA310S linuxrc: starting pid 2544, tty '': '-/bin/sh'
  955.  
  956. / #
  957. / # poweroff
  958. save exit: isCheckpointed 1
  959. led_state_map_addr = 4e
  960. Jul 17 07:42:34 NSA310S linuxrc: starting pid 2581, tty '': '/etc/init.d/rc.shutdown'
  961. / # Starting "/etc/init.d/zypkg_controller.sh".
  962. Stopping all zypkgs via "/etc/init.d/zypkg_controller.sh" ...
  963. - shutdowning package "NFS" ...
  964. ---> Error: shutdown program "/usr/local/zy-pkgs/etc/init.d/NFS" is not existed or not excutable
  965. - shutdowning package "BackupPlanner" ...
  966. ---> Error: shutdown program "/usr/local/zy-pkgs/etc/init.d/BackupPlanner" is not existed or not excutable
  967. - shutdowning package "SMART" ...
  968. ---> Error: shutdown program "/usr/local/zy-pkgs/etc/init.d/SMART" is not existed or not excutable
  969. - shutdowning package "DyDNS" ...
  970. ---> Error: shutdown program "/usr/local/zy-pkgs/etc/init.d/DyDNS" is not existed or not excutable
  971. - shutdowning package "SqueezeCenter" ...
  972. ---> Error: shutdown program "/usr/local/zy-pkgs/etc/init.d/SqueezeCenter" is not existed or not excutable
  973. - shutdowning package "eMule" ...
  974. ---> Error: shutdown program "/usr/local/zy-pkgs/etc/init.d/eMule" is not existed or not excutable
  975. - shutdowning package "gallery" ...
  976. ---> Error: shutdown program "/usr/local/zy-pkgs/etc/init.d/gallery" is not existed or not excutable
  977. - shutdowning package "WordPress" ...
  978. ---> Error: shutdown program "/usr/local/zy-pkgs/etc/init.d/WordPress" is not existed or not excutable
  979. - shutdowning package "PHP-MySQL-phpMyAdmin" ...
  980. ---> Error: shutdown program "/usr/local/zy-pkgs/etc/init.d/PHP-MySQL-phpMyAdmin" is not existed or not excutable
  981. /etc/init.d/zypkg_controller.sh: line 491: can't open /i-data/md0/admin/zy-pkgs/USRPKG_DEPS_SHUTDOWN: no such file
  982. Finish "/etc/init.d/zypkg_controller.sh".
  983. Starting "/etc/init.d/zypkg_controller.sh".
  984. Starting to release zy-pkgs environment ...
  985. umount: /usr/local/apache/htdocs/adv,/pkg: not mounted
  986. umount: /etc/zyxel/zy-pkgs: not mounted
  987. umount: /usr/local/zy-pkgs: not mounted
  988. Finish "/etc/init.d/zypkg_controller.sh".
  989. start kill.
  990. 1424 root 3492 S /usr/sbin/zylogd
  991. 1434 root 7836 S /usr/sbin/uamd
  992. 1692 root 5432 S < /usr/local/sbin/dhcpcd_request egiga0 50 auto
  993. 1721 root 1600 S < /sbin/dhcpcd -N -c /usr/sbin/dhcpcd.sh -h NSA310S -m
  994. 1795 root 13724 R N pure-ftpd (SERVER)
  995. 1866 root 21204 S N /usr/bin/schedule_controller
  996. 1869 root 1428 S N /usr/bin/timer_source
  997. 1940 root 10904 S < /usr/sbin/httpd -f /etc/service_conf/httpd.conf
  998. 1977 nobody 113m S < (wsgi:groupName -f /etc/service_conf/httpd.conf
  999. 1978 nobody 10904 S < /usr/sbin/httpd -f /etc/service_conf/httpd.conf
  1000. 1979 nobody 10904 S < /usr/sbin/httpd -f /etc/service_conf/httpd.conf
  1001. 1995 root 11648 S < /usr/sbin/nsuagent
  1002. 2047 root 2796 S N /sbin/crond -L /dev/null
  1003. 2093 root 1564 S N /usr/local/btn/do_btncpy
  1004. 2464 root 2724 S /bin/sh -c /usr/sbin/dropbox_hook
  1005. 2465 root 2148 S /usr/sbin/dropbox_hook
  1006. 2467 root 4288 R syslog-ng
  1007. 2494 root 1664 S N /bin/lld2d egiga0
  1008. 2544 root 2800 S -/bin/sh
  1009. Jul 17 15:42:36 NSA310S syslog-ng[2467]: Termination requested via signal, terminating;
  1010. Jul 17 07:42:36 NSA310S dhcpcd[1721]: terminating on signal 15
  1011. Jul 17 15:42:36 NSA310S dhcpcd[1721]: terminating on signal 11
  1012. Jul 17 15:42:36 NSA310S syslog-ng[2467]: syslog-ng shutting down; version='2.0.10'
  1013.  
  1014. 2544 root 2800 S -/bin/sh
  1015. BusyBox v1.17.2 (2014-02-07 14:12:32 CST) multi-call binary.
  1016.  
  1017. Usage: swapoff [-a] [DEVICE]
  1018.  
  1019. rootfs / rootfs rw 0 0
  1020. /proc /proc proc rw,relatime 0 0
  1021. /sys /sys sysfs rw,relsave exit: isCheckpointed 1
  1022. atime 0 0
  1023. none /proc/bus/usb usbfs rw,relatime 0 0
  1024. devpts /dev/pts devpts rw,relatime,mode=600 0 0
  1025. /dev/mtdblock6 /zyxel/mnt/nand yaffs2 ro,relatime 0 0
  1026. none /zyxel/mnt/sysdisk ramfs ro,relatime 0 0
  1027. /dev/loop0 /ram_bin ext2 ro,relatime,errors=continue 0 0
  1028. /dev/loop0 /usr ext2 ro,relatime,errors=continue 0 0
  1029. /dev/loop0 /lib/security ext2 ro,relatime,errors=continue 0 0
  1030. /dev/loop0 /lib/modules ext2 ro,relatime,errors=continue 0 0
  1031. /dev/ram0 /tmp/tmpfs tmpfs rw,relatime,size=5120k 0 0
  1032. /dev/ram0 /usr/local/etc tmpfs rw,relatime,size=5120k 0 0
  1033. /dev/ram0 /usr/local/var tmpfs rw,relatime,size=5120k 0 0
  1034. /dev/mtdblock4 /usr/local/apache/web_framework/data/config yaffs2 rw,relatime 0 0
  1035.  
  1036. The system is going down NOW!
  1037.  
  1038. Sent SIGTERM to all processes
  1039.  
  1040. Sent SIGKILL to all processes
  1041.  
  1042. Requesting system poweroff
  1043. md: stopping all md devices.
  1044. Power down.
  1045. reg(0, 4) = 0x21
  1046. reg(0, 9) = 0x0
  1047. egiga0: link down
  1048. reg(0, 0) = 0x1140
  1049. reg(3, 18) = 0x4985
  1050. reg(3, 17) = 0x4420
  1051. reg(0, 18) = 0x0
  1052. reg(17, 16) = 0x4500
  1053. reg(17, 25) = 0xf45c
  1054. reg(17, 24) = 0x2fab
  1055. reg(17, 23) = 0x28fe
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!