Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- dmesg
- [ 0.000000@0] Booting Linux on physical CPU 0x200
- [ 0.000000@0] Linux version 3.10.80 (alex@amlinux.ru) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Sat Jun 20 11:07:55 MSK 2015
- [ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
- [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC
- [ 0.000000@0] physical memory start address is 0x200000
- [ 0.000000@0] reserved_end is 99fffff
- [ 0.000000@0]
- [ 0.000000@0] Total memory is 2046 MiB
- [ 0.000000@0] Reserved low memory from 0x06000000 to 0x099fffff, size: 58 MiB
- [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
- [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
- [ 0.000000@0] deinterlace0(high) : 0x7df00000 - 0x80000000 ( 33 MiB)
- [ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB)
- [ 0.000000@0] vdec0(high) : 0x79f00000 - 0x7df00000 ( 64 MiB)
- [ 0.000000@0] ppmgr0(high) : 0x78f00000 - 0x79f00000 ( 16 MiB)
- [ 0.000000@0] get storage device: storage 2
- [ 0.000000@0] value=2
- [ 0.000000@0] get_storage_device : get storage device: storage 2
- [ 0.000000@0] get_storage_device : value=2
- [ 0.000000@0] [get_storage_device] storage_flag=2
- [ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000
- [ 0.000000@0] cma: Found region@1, memory base 0, size 192 MiB
- [ 0.000000@0] cma: CMA: reserved 192 MiB at 23000000
- [ 0.000000@0] cma: Found region@0, memory base 0, size 18 MiB
- [ 0.000000@0] cma: CMA: reserved 20 MiB at 21c00000
- [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000@0] On node 0 totalpages: 476416
- [ 0.000000@0] free_area_init_node: node 0, pgdat c0c70980, node_mem_map c0eee000
- [ 0.000000@0] Normal zone: 1520 pages used for memmap
- [ 0.000000@0] Normal zone: 0 pages reserved
- [ 0.000000@0] Normal zone: 176128 pages, LIFO batch:31
- [ 0.000000@0] HighMem zone: 2346 pages used for memmap
- [ 0.000000@0] HighMem zone: 300288 pages, LIFO batch:31
- [ 0.000000@0] Meson chip version = RevA (1D:A - 0:74E)
- [ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c1e1d000 s12288 r8192 d12288 u32768
- [ 0.000000@0] pcpu-alloc: s12288 r8192 d12288 u32768 alloc=8*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 474896
- [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=2 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x15100000,1080p,full hdmimode=1080p cvbsmode=576cvbs androidboot.firstboot=0 hdmitx=cecf hdmitx=cecf boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 BOOT_IMAGE=kernel.img scaling_governor=ondemand scaling_min_freq=96000 scaling_max_freq=1608000 ssh
- [ 0.000000@0] cvbs performance line = 0
- [ 0.000000@0] cvbs trimming line = 0xa000
- [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
- [ 0.000000@0] osd1:1
- [ 0.000000@0] loaded:268435459
- [ 0.000000@0] logo has been loaded
- [ 0.000000@0] 1080p:15
- [ 0.000000@0] full:2
- [ 0.000000@0] kernel get hdmimode form uboot is 1080p
- [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
- [ 0.000000@0] hdmitx: cec: Function List: enable, one touch play, one touch standby, auto power by tv
- [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0xf
- [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0xf
- [ 0.000000@0] hdmitx: cec: Function List: enable, one touch play, one touch standby, auto power by tv
- [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0xf
- [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0xf
- [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000@0] Memory: 64MB 16MB 1781MB = 1861MB total
- [ 0.000000@0] Memory: 1644752k/1644752k available, 260912k reserved, 1201152K highmem
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000@0] .text : 0xc0008000 - 0xc0b6d1ec (11669 kB)
- [ 0.000000@0] .init : 0xc0b6e000 - 0xc0bc7000 ( 356 kB)
- [ 0.000000@0] .data : 0xc0bc8000 - 0xc0c77970 ( 703 kB)
- [ 0.000000@0] .bss : 0xc0c77970 - 0xc0ee9f2c (2506 kB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] NR_IRQS:256
- [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000@0] Global timer: MESON TIMER-F (c0be6880) initialized
- [ 0.000000@0] Switching to timer-based delay loop
- [ 0.000000@0] Console: colour dummy device 80x30
- [ 0.000000@0] meson_serial_console_setup
- [ 0.000000@0] console [ttyS0] enabled
- [ 0.406028@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- [ 0.416322@0] pid_max: default: 32768 minimum: 301
- [ 0.421204@0] Security Framework initialized
- [ 0.425397@0] Mount-cache hash table entries: 512
- [ 0.433543@0] CPU: Testing write buffer coherency: ok
- [ 0.435305@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
- [ 0.440929@0] Setting up static identity map for 0xc07f74d0 - 0xc07f7528
- [ 0.447622@0] L310 cache controller enabled
- [ 0.451717@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B
- [ 0.459228@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000
- [ 0.467380@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
- [ 0.550128@0] write pen_release: 1
- [ 0.550295@1] CPU1: Booted secondary processor
- [ 0.550308@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
- [ 0.570128@0] write pen_release: 2
- [ 0.578260@2] CPU2: Booted secondary processor
- [ 0.578271@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
- [ 0.590120@0] write pen_release: 3
- [ 0.598252@3] CPU3: Booted secondary processor
- [ 0.598263@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
- [ 0.598327@0] Brought up 4 CPUs
- [ 0.611470@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
- [ 0.617701@0] CPU: All CPU(s) started in SVC mode.
- [ 0.622929@0] devtmpfs: initialized
- [ 0.631073@0] clkrate [ xtal ] : 24000000
- [ 0.631102@0] clkrate [ pll_sys ] : 1200000000
- [ 0.634518@0] clkrate [ pll_fixed ] : 2550000000
- [ 0.639199@0] clkrate [ pll_vid ] : 732000000
- [ 0.643626@0] TODO: clk_get_rate_hpll() is not implement in M8 now
- [ 0.649773@0] clkrate [ pll_hpll ] : 0
- [ 0.653592@0] clkrate [ pll_ddr ] : 0
- [ 0.657316@0] clkrate [ a9_clk ] : 1200000000
- [ 0.661741@0] clkrate [ clk81 ] : 141666666
- [ 0.667004@0] pinctrl core: initialized pinctrl subsystem
- [ 0.671678@0] regulator-dummy: no parameters
- [ 0.680921@0] NET: Registered protocol family 16
- [ 0.687039@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.690591@0] VPU driver version: v03
- [ 0.692173@0] vpu driver detect cpu type: m8m2
- [ 0.696594@0] load vpu_clk in dts: 364000000Hz(7)
- [ 0.701346@0] vpu_probe OK
- [ 0.704251@0] cma: Assigned CMA region with name cma_4k2k to vdec.0 device
- [ 0.711080@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device
- [ 0.721884@0] amlogic_gpio gpio: Probed amlogic GPIO driver
- [ 0.723934@0] register lm device lm-root
- [ 0.727442@0] register lm device lm1
- [ 0.731016@0] register lm device lm0
- [ 0.734694@0] Init pinux probe!
- [ 0.738086@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver
- [ 0.743399@0] tv_init_module
- [ 0.746180@0] major number 254 for disp
- [ 0.749989@0] vout_register_server
- [ 0.753379@0] register tv module server ok
- [ 0.757517@0] major number 0 for disp
- [ 0.761181@0] register tv module server ok
- [ 0.765480@0] video2_early_init enter
- [ 0.769060@0] video2_early_init exit
- [ 0.772645@0] aml_i2c version: 20140813
- [ 0.776465@0] plat->state_name:default
- [ 0.776476@0] master_no = 0, master_regs=fe600500
- [ 0.776612@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(e17e08a8)
- [ 0.782510@0] aml-i2c i2c-AO: aml i2c bus driver.
- [ 0.787257@0] plat->state_name:default
- [ 0.787269@0] master_no = 1, master_regs=fe108500
- [ 0.787370@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(e17e14a8)
- [ 0.793168@0] aml-i2c i2c-A: aml i2c bus driver.
- [ 0.797832@0] plat->state_name:default
- [ 0.797843@0] master_no = 2, master_regs=fe1087c0
- [ 0.797956@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(e17e20a8)
- [ 0.803745@0] aml-i2c i2c-B: aml i2c bus driver.
- [ 0.808419@0] plat->state_name:default
- [ 0.808430@0] master_no = 3, master_regs=fe1087e0
- [ 0.808525@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(e17e2ca8)
- [ 0.814319@0] aml-i2c i2c-C: aml i2c bus driver.
- [ 0.819061@0] aml_pmu_init, 454
- [ 0.822099@0] call aml_dvfs_init in
- [ 0.825527@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
- [ 0.825534@0] [DVFS]dvfs table of vcck_dvfs is:
- [ 0.825539@0] [DVFS] freq, min_uV, max_uV
- [ 0.825544@0] [DVFS] 96000, 825000, 825000
- [ 0.825549@0] [DVFS] 192000, 825000, 825000
- [ 0.825553@0] [DVFS] 312000, 825000, 825000
- [ 0.825557@0] [DVFS] 408000, 825000, 825000
- [ 0.825561@0] [DVFS] 504000, 825000, 825000
- [ 0.825565@0] [DVFS] 600000, 850000, 850000
- [ 0.825570@0] [DVFS] 720000, 850000, 850000
- [ 0.825574@0] [DVFS] 816000, 875000, 875000
- [ 0.825578@0] [DVFS] 1008000, 925000, 925000
- [ 0.825582@0] [DVFS] 1200000, 975000, 975000
- [ 0.825586@0] [DVFS] 1416000, 1150000, 1150000
- [ 0.825591@0] [DVFS] 1608000, 1150000, 1150000
- [ 0.825595@0] [DVFS] 1800000, 1200000, 1200000
- [ 0.825599@0] [DVFS] 1992000, 1200000, 1200000
- [ 0.825750@0] hdmitx: system: amhdmitx_init
- [ 0.829650@0] hdmitx: system: Ver: 2014May6
- [ 0.833881@0] hdmitx: system: amhdmitx_probe
- [ 0.838495@0] hdmitx: system: gate/pwr cmd: 7
- [ 0.842406@0] hdmitx: system: ALREADY init VIC = 16
- [ 0.847246@0] hdmitx: system: gate/pwr cmd: 0
- [ 0.851958@1] hdmitx: system: reset intr mask
- [ 0.870335@0] hdmitx: system: irq 1
- [ 0.919294@0] bio: create slab <bio-0> at 0
- [ 0.920036@0] SCSI subsystem initialized
- [ 0.922123@0] usbcore: registered new interface driver usbfs
- [ 0.927450@0] usbcore: registered new interface driver hub
- [ 0.932942@0] usbcore: registered new device driver usb
- [ 0.938156@0] Linux video capture interface: v2.00
- [ 0.943040@0] pps_core: LinuxPPS API ver. 1 registered
- [ 0.947919@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.957282@0] PTP clock support registered
- [ 0.961939@0] mode is 15,sync_duration_den=1,sync_duration_num=60
- [ 0.967337@0] TV mode 1080p selected.
- [ 0.970986@0] already display in uboot
- [ 0.976849@0] call aml_pmu_probe_init in
- [ 0.978656@0] aml_pmus_probe, child name:rn5t618
- [ 0.983212@0] aml_pmus_probe, i2c_bus:i2c_bus_ao
- [ 0.988076@0] [RICOH]setup_supply_data, failed to get property: board_battery
- [ 0.990713@1] hdmitx: system: gate/pwr cmd: 4
- [ 0.999253@0] [DVFS]aml_dvfs_register_driver, driver rn5t618-dvfs regist success, mask:7, source id:1
- [ 0.999260@0] [RN5T618]ricoh_pmu_probe, 283
- [ 0.999877@0] [RN5T618]coulomb_flag:0x00
- [ 0.999882@0] [RN5T618]no saved coulomb counter
- [ 0.999988@0] ricoh_pmu_probe, 298
- [ 0.999997@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t618, type:ricoh_pmu
- [ 1.008232@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.014525@0] Bluetooth: Core ver 2.16
- [ 1.017858@0] NET: Registered protocol family 31
- [ 1.022392@0] Bluetooth: HCI device and connection manager initialized
- [ 1.028889@0] Bluetooth: HCI socket layer initialized
- [ 1.033917@0] Bluetooth: L2CAP socket layer initialized
- [ 1.039120@0] Bluetooth: SCO socket layer initialized
- [ 1.044392@0] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.052081@0] Switching to clocksource Timer-E
- [ 1.074868@0] NET: Registered protocol family 2
- [ 1.075350@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.081043@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.087637@0] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.094078@0] TCP: reno registered
- [ 1.097443@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.103510@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.110137@0] NET: Registered protocol family 1
- [ 1.114671@0] RPC: Registered named UNIX socket transport module.
- [ 1.120580@0] RPC: Registered udp transport module.
- [ 1.125429@0] RPC: Registered tcp transport module.
- [ 1.130281@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.136924@0] wifi_dev_probe
- [ 1.139727@0] wifi_dt : interrupt_pin=GPIOX_21
- [ 1.144149@0] wifi_dt : irq_num=null
- [ 1.147715@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
- [ 1.152815@0] wifi_dt : power_on_pin=GPIOAO_6
- [ 1.157171@0] wifi_dt : power_on_pin2=GPIOX_11
- [ 1.161577@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=122
- [ 1.170512@0] Unpacking initramfs...
- [ 1.181313@0] Freeing initrd memory: 3372K (c4e09000 - c5154000)
- [ 1.183386@0] audit: initializing netlink socket (disabled)
- [ 1.185409@1] hdmitx: system: gate/pwr cmd: 5
- [ 1.185411@1] hdmitx: edid: edid ready
- [ 1.185412@1] hdmitx: system: gate/pwr cmd: 4
- [ 1.199657@0] type=2000 audit(1.100:1): initialized
- [ 1.204780@1] balance_pgdat end zone=0, pgdat_is_balanced=0
- [ 1.204876@0] bounce pool size: 64 pages
- [ 1.213743@0] VFS: Disk quotas dquot_6.5.2
- [ 1.213966@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.220865@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.226250@0] NFS: Registering the id_resolver key type
- [ 1.230339@0] Key type id_resolver registered
- [ 1.234642@0] Key type id_legacy registered
- [ 1.239218@0] fuse init (API version 7.22)
- [ 1.243417@0] msgmni has been set to 1312
- [ 1.247911@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 1.254407@0] io scheduler noop registered
- [ 1.258492@0] io scheduler deadline registered
- [ 1.263062@0] io scheduler cfq registered (default)
- [ 1.268221@0] [drm] Initialized drm 1.1.0 20060810
- [ 1.275229@0] loop: module loaded
- [ 1.276487@0] tun: Universal TUN/TAP device driver, 1.6
- [ 1.281023@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.287515@0] PPP generic driver version 2.4.2
- [ 1.291941@0] PPP BSD Compression module registered
- [ 1.296632@0] PPP Deflate Compression module registered
- [ 1.301825@0] PPP MPPE Compression module registered
- [ 1.306769@0] NET: Registered protocol family 24
- [ 1.311470@0] usbcore: registered new interface driver asix
- [ 1.317025@0] usbcore: registered new interface driver ax88179_178a
- [ 1.323222@0] usbcore: registered new interface driver cdc_ether
- [ 1.329214@0] usbcore: registered new interface driver dm9601
- [ 1.334920@0] usbcore: registered new interface driver net1080
- [ 1.340740@0] usbcore: registered new interface driver cdc_subset
- [ 1.346814@0] usbcore: registered new interface driver zaurus
- [ 1.352537@0] usbcore: registered new interface driver cdc_ncm
- [ 1.358606@0] usbcore: registered new interface driver usb-storage
- [ 1.364667@0] mousedev: PS/2 mouse device common for all mice
- [ 1.370247@0] i2c /dev entries driver
- [ 1.374468@0] lirc_dev: IR Remote Control driver registered, major 246
- [ 1.380368@0] IR NEC protocol handler initialized
- [ 1.385035@0] IR RC5(x) protocol handler initialized
- [ 1.389982@0] IR RC6 protocol handler initialized
- [ 1.394656@0] IR JVC protocol handler initialized
- [ 1.395399@1] hdmitx: system: gate/pwr cmd: 5
- [ 1.395401@1] hdmitx: edid: edid ready
- [ 1.395406@1] hdmitx: edid: check sum valid
- [ 1.395407@1] hdmitx: edid: check sum valid
- [ 1.395409@1] hdmitx: edid: blk0 raw data
- [ 1.395431@1] 00ffffffffffff004c2d86043332464330130103801009782aee91a3544c9926
- [ 1.395451@1] 0f5054bfef80714f8100814081809500a940b3000101023a801871382d40582c
- [ 1.395471@1] 4500a05a0000001e011d00bc52d01e20b8285540a05a0000001e000000fd0017
- [ 1.395491@1] 4b1b5111000a202020202020000000fc0053796e634d61737465720a20200173
- [ 1.395492@1]
- [ 1.395493@1] hdmitx: edid: blk1 raw data
- [ 1.395513@1] 020321f14d9304120314052021221f100716230907078301000066030c001000
- [ 1.395533@1] 808c0ad08a20e02d10103e9600a05a00000018011d007251d01e206e285500a0
- [ 1.395553@1] 5a0000001e011d80d0721c1620102c2580a05a0000009e011d8018711c162058
- [ 1.395573@1] 2c2500a05a0000009e8c0ad090204031200c405500a05a000000180000000091
- [ 1.395574@1]
- [ 1.395601@1] hdmitx: edid: find IEEEOUT
- [ 1.395636@1] hdmitx: video: get current mode: 1080p
- [ 1.395643@1] is_similar_hdmi_vic[324] vic_old=16,mode_new=15
- [ 1.395645@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
- [ 1.395647@1] hdmitx: audio: audio channel num is 0
- [ 1.395652@1] hdmitx: audio: SPDIF
- [ 1.395663@1] hdmitx: audio: current VIC: 16
- [ 1.395665@1] hdmitx: audio: audio sample rate: 0
- [ 1.395666@1] hdmitx: audio: set audio N para
- [ 1.395674@1] hdmitx: audio: PCM out to HDMI
- [ 1.416151@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
- [ 1.416152@1] hdmitx: audio: i2s_to_spdif_flag:1
- [ 1.416153@1] hdmitx: audio: Enable audio spdif to HDMI
- [ 1.416207@1] hdmitx: cec: CEC not ready
- [ 1.551047@0] IR Sony protocol handler initialized
- [ 1.555808@0] IR RC5 (streamzap) protocol handler initialized
- [ 1.561523@0] IR SANYO protocol handler initialized
- [ 1.566381@0] IR MCE Keyboard/mouse protocol handler initialized
- [ 1.572355@0] IR LIRC bridge handler initialized
- [ 1.577069@0] usbcore: registered new interface driver uvcvideo
- [ 1.582849@0] USB Video Class driver (1.1.1)
- [ 1.587400@0] device-mapper: uevent: version 1.0.3
- [ 1.592142@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 1.600646@0] Bluetooth: HCI UART driver ver 2.2
- [ 1.605036@0] Bluetooth: HCI H4 protocol initialized
- [ 1.610348@0] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.620368@0] usbcore: registered new interface driver usbhid
- [ 1.621244@0] usbhid: USB HID core driver
- [ 1.625636@0] zram: Created 1 device(s) ...
- [ 1.629735@0] ashmem: initialized
- [ 1.632832@0] logger: created 256K log 'log_main'
- [ 1.637523@0] logger: created 256K log 'log_events'
- [ 1.642373@0] logger: created 256K log 'log_radio'
- [ 1.647149@0] logger: created 256K log 'log_system'
- [ 1.652118@0] vout_init_module
- [ 1.654916@0] start init vout module
- [ 1.658692@0] create vout attribute ok
- [ 1.663064@0] ge2d_init
- [ 1.665023@0] ge2d_dev major:243
- [ 1.668532@0] ge2d start monitor
- [ 1.671645@0] osd_init
- [ 1.671651@1] ge2d workqueue monitor start
- [ 1.678144@0] osd_probe, vinfo:c0856aa4
- [ 1.682096@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
- [ 1.690082@0] osd_probe, mydef_var:c0c25578, vinfo:c0856aa4
- [ 1.695629@0] init fbdev bpp is :32
- [ 1.699172@0] ---------------clear framebuffer0 memory
- [ 1.734976@0] Console: switching to colour frame buffer device 240x67
- [ 1.761568@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0200000, size=1024K
- [ 1.767266@0] osd_probe, mydef_var:c0c25578, vinfo:c0856aa4
- [ 1.772803@0] don't find to display_size_default from mesonfb-dts
- [ 1.778880@0] init fbdev bpp is :16
- [ 1.794829@0] osd probe ok
- [ 1.794994@0] osd_ext_init
- [ 1.795401@0] vout2_init_module enter
- [ 1.804655@0] amlvideo-000: V4L2 device registered as video10
- [ 1.805122@0] ionvideo-000: V4L2 device registered as video13
- [ 1.810480@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
- [ 1.818902@0] DI: di_init
- [ 1.818928@0] DI: di_probe
- [ 1.819325@0] aml_wdt_driver_init,301
- [ 1.822528@0] ** disable watchdog
- [ 1.826041@0] keys===========================================
- [ 1.831549@0] keys_devno=f000000
- [ 1.834938@0] securitykey: device aml_keys created
- [ 1.839550@0] amlkeys=0
- [ 1.842025@0] platform_driver_register--aml_keys_driver--------------------
- [ 1.848960@0] key unify config unifykey-num is 6
- [ 1.853497@0] key unify fact unifykey-num is 6
- [ 1.857917@0] aml_unifykeys_probe:694=============unifykey_devno:ef00000
- [ 1.864772@0] unifykey: device unifykeys created ok
- [ 1.869522@0] platform_driver_register--unifykey management driver--------------------
- [ 1.877670@0] set uart_ao pinmux use pinctrl subsystem
- [ 1.882517@0] P_AO_RTI_PIN_MUX_REG:5860
- [ 1.886366@0] start uart_ao_ttyS0:(irq = 122)
- [ 1.890661@0] register uart_ao ok
- [ 1.894168@0] set uart_a pinmux use pinctrl subsystem
- [ 1.899009@0] P_AO_RTI_PIN_MUX_REG:5860
- [ 1.902807@0] start uart_a_ttyS1:(irq = 58)
- [ 1.906982@0] register uart_a ok
- [ 1.910360@0] start uart_d_ttyS4:(irq = 126)
- [ 1.914415@0] register uart_d ok
- [ 1.917782@0] dwc_otg: version 3.10a 12-MAY-2014
- [ 1.922232@0] dwc_otg lm-root: dwc_otg_driver_probe(e1816800)
- [ 1.922238@0] dwc_otg_driver_probe NOT match
- [ 1.926500@0] dwc_otg lm1: dwc_otg_driver_probe(e1816a00)
- [ 1.926515@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
- [ 1.935053@0] USB (1) use clock source: XTAL input
- [ 1.940878@0] dwc_otg lm1: base=0xfe080000
- [ 1.940885@0] dwc_otg lm1: dwc_otg_device=0xe0ff23c0
- [ 1.960917@0] Core Release: 3.10a
- [ 1.960941@0] Setting default values for core params
- [ 1.963542@0] curmode: 1, host_only: 1
- [ 1.967290@0] dwc_otg lm1: DMA config: BURST_DEFAULT
- [ 1.987404@0] Using Buffer DMA mode
- [ 1.987430@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 1.989761@0] Working on port type = HOST
- [ 1.994439@0] dwc_otg lm1: DWC OTG Controller
- [ 1.998126@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
- [ 2.004785@0] dwc_otg lm1: irq 63, io mem 0x00000000
- [ 2.009720@0] -------hcd->flags.d32 = 0
- [ 2.013531@0] Init: Port Power? op_state=1
- [ 2.017603@0] Init1: Power Port (0)
- [ 2.021132@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.028011@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.035380@0] usb usb1: Product: DWC OTG Controller
- [ 2.040211@0] usb usb1: Manufacturer: Linux 3.10.80 dwc_otg_hcd
- [ 2.046125@0] usb usb1: SerialNumber: lm1
- [ 2.050460@0] hub 1-0:1.0: USB hub found
- [ 2.054004@0] hub 1-0:1.0: 1 port detected
- [ 2.058220@0] dwc_otg lm0: dwc_otg_driver_probe(e1816c00)
- [ 2.058246@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
- [ 2.066688@0] USB (0) use clock source: XTAL input
- [ 2.072416@0] dwc_otg lm0: base=0xfe040000
- [ 2.072422@0] dwc_otg lm0: dwc_otg_device=0xe178bcc0
- [ 2.092449@0] Core Release: 3.10a
- [ 2.092472@0] Setting default values for core params
- [ 2.095074@0] curmode: 1, host_only: 0
- [ 2.138793@0] dwc_otg lm0: DMA config: BURST_DEFAULT
- [ 2.158891@0] Using Buffer DMA mode
- [ 2.158916@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 2.161247@0] Working on port type = OTG
- [ 2.165169@0] Current port type: SLAVE
- [ 2.168982@0] dwc_otg lm0: DWC OTG Controller
- [ 2.173221@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
- [ 2.179936@0] dwc_otg lm0: irq 62, io mem 0x00000000
- [ 2.184855@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.191783@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.199153@0] usb usb2: Product: DWC OTG Controller
- [ 2.203983@0] usb usb2: Manufacturer: Linux 3.10.80 dwc_otg_hcd
- [ 2.209895@0] usb usb2: SerialNumber: lm0
- [ 2.214222@0] hub 2-0:1.0: USB hub found
- [ 2.217797@0] hub 2-0:1.0: 1 port detected
- [ 2.221950@0] Dedicated Tx FIFOs mode
- [ 2.225709@0] using timer detect id change, e179b400
- [ 2.230570@0] boot_device_flag : -1
- [ 2.233887@0] do not init nand
- [ 2.237054@0] boot_device_flag : -1
- [ 2.240449@0] ethernet_driver probe!
- [ 2.243945@0] Please config savepowermode.
- [ 2.246969@3] HOST mode
- [ 2.250472@0] ethernetinit(dbg[c0c2c01c]=1)
- [ 2.254630@0] ethernet base addr is fe0c0000
- [ 2.258900@1] Indeed it is in host mode hprt0 = 00021501
- [ 2.258891@0] write mac add to:e1782fc8: 4a fc 39 c9 74 38 |J.9.t8|
- [ 2.272923@0] libphy: AMLMAC MII Bus: probed
- [ 2.274630@0] eth0: PHY ID 02430c54 at 0 IRQ -1 (0:00) active
- [ 2.282107@0] Amlogic A/V streaming port init
- [ 2.285102@3] -------hcd->flags.d32 = 0
- [ 2.286203@0] buffersize=262144,0,start=0
- [ 2.286210@0] Subtitle stbuf alloced at 0xe1840000, size = 262144
- [ 2.286213@0] changed the (2) buffer size from 0 to 262144
- [ 2.286443@0] init vdec memsource 79f00000->7defffff
- [ 2.286615@0] [tsync_pcr_init]init success.
- [ 2.286616@0] amvideocap_init_module
- [ 2.286815@0] regist mpeg12 codec profile
- [ 2.286893@0] regist mpeg4 codec profile
- [ 2.286895@0] amvdec_vc1 module init
- [ 2.286974@0] regist vc1 codec profile
- [ 2.286976@0] amvdec_h264 module init
- [ 2.287076@0] regist h264 codec profile
- [ 2.287077@0] amvdec_h264mvc module init
- [ 2.287158@0] regist hmvc codec profile
- [ 2.287159@0] amvdec_h264_4k2k module init
- [ 2.287244@0] regist h264_4k2k codec profile
- [ 2.287245@0] amvdec_h265 module init
- [ 2.287327@0] regist hevc codec profile
- [ 2.287410@0] regist mjpeg codec profile
- [ 2.287412@0] amvdec_real module init
- [ 2.287489@0] amvdec_avs module init
- [ 2.287670@0] amvenc_avc memory resource undefined.
- [ 2.287672@0] encode_wq_init.
- [ 2.287675@0] encode start monitor.
- [ 2.287715@2] encode workqueue monitor start.
- [ 2.288002@0] jpegenc module init
- [ 2.288308@0] picdec buffer size is 4000000
- [ 2.288455@0] alloc_keep_buffer keep_y_addr e0a00000
- [ 2.288467@0] alloc_keep_buffer keep_u_addr e1100000
- [ 2.288474@0] alloc_keep_buffer keep_v_addr e1880000
- [ 2.288477@0] yaddr=e0a00000,u_addr=e1100000,v_addr=e1880000
- [ 2.288757@0] create_ge2d_work_queue video task ok
- [ 2.288760@0] video2_init enter
- [ 2.289212@0]
- [ 2.289212@0]
- [ 2.289212@0] VECM init
- [ 2.289212@0]
- [ 2.289440@0] efuse===========================================
- [ 2.289619@0] efuse: device efuse created
- [ 2.289711@0] efuse--------------------------------------------
- [ 2.289713@0] SARADC Driver init.
- [ 2.289845@0] __saradc_probe__
- [ 2.435116@0] usb 1-1: new full-speed USB device number 2 using dwc_otg
- [ 2.435211@1] saradc calibration: ref_val = 508
- [ 2.435213@1] saradc calibration: ref_nominal = 512
- [ 2.435215@1] saradc calibration: coef = 4080
- [ 2.435323@1] Remote Driver
- [ 2.435392@1] Remote platform_data g_remote_base=fe600580
- [ 2.435414@1] set drvdata completed
- [ 2.435421@1] device_create_file completed
- [ 2.435721@1] input: aml_keypad as /devices/platform/meson-remote/input/input0
- [ 2.435988@1] input_register_device completed
- [ 2.436027@1] [0xffffff00] = 0x1dd0190
- [ 2.436028@1] [0xffffff04] = 0xf800ca
- [ 2.436030@1] [0xffffff08] = 0x82006e
- [ 2.436032@1] [0xffffff0c] = 0x3c0030
- [ 2.436033@1] [0xffffff10] = 0x30fa0013
- [ 2.436035@1] [0xffffff18] = 0x6f19000
- [ 2.436036@1] [0xffffff1c] = 0xbe40
- [ 2.436038@1] [0x0] = 0xfa00a0
- [ 2.436039@1] [0x4] = 0xfa00a0
- [ 2.436041@1] [0x8] = 0xfa00a0
- [ 2.436042@1] [0xc] = 0x640030
- [ 2.436044@1] [0x10] = 0x30fa0013
- [ 2.436045@1] [0x18] = 0x961b800
- [ 2.436047@1] [0x1c] = 0x9740
- [ 2.436048@1] [0x20] = 0x104
- [ 2.436049@1] [0x24] = 0x0
- [ 2.436051@1] [0x28] = 0x0
- [ 2.436053@1] set_remote_mode[69]
- [ 2.436068@1] remote config major:233
- [ 2.436256@1] physical address:0x2127c000
- [ 2.436339@1] GPIO Keypad Driver init.
- [ 2.436401@1] ==gpio_key_probe==
- [ 2.436404@1] gpio request set to High-Z status
- [ 2.436420@1] reg:2620,clearmask=400040,setmask=1
- [ 2.436423@1] reg:2622,clearmask=ff0000,set pin=3
- [ 2.436425@1] reg:2623,clearmask=7000000,setmask=7
- [ 2.436428@1] reg:2620,clearmask=800080,setmask=10001
- [ 2.436430@1] reg:2622,clearmask=ff000000,set pin=3
- [ 2.436433@1] reg:2623,clearmask=70000000,setmask=7
- [ 2.436450@1] power key(116) registed.
- [ 2.436452@0] key 116 up
- [ 2.436600@1] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input1
- [ 2.436724@1] gpio keypad register input device completed.
- [ 2.436729@1] gpio keypad major:232
- [ 2.436981@1] spi_nor_init
- [ 2.437097@1] amlogic_spi_nor_probe:
- [ 2.437102@1] amlogic_spi->state_name:default
- [ 2.437221@1] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
- [ 2.437319@1] check_storage_device : spi boot_device_flag : -1
- [ 2.437321@1] spi_nor_probe
- [ 2.437323@1] spi_nor_probe 629 boot_device_flag 2 : do not init spi
- [ 2.437330@1] spi_nor: probe of apollospi:32766 failed with error -12
- [ 2.437334@1] amlogic_spi_nor_probe over
- [ 2.437473@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
- [ 2.685501@0] Indeed it is in host mode hprt0 = 00021501
- [ 2.685530@3] Init: Port Power? op_state=1
- [ 2.685532@3] Init1: Power Port (0)
- [ 2.685536@3] [RN5T618]rn5t618_otg_change, driver is not ready, do it later
- [ 2.685538@3] set usb port power on (board gpio 15)!
- [ 2.710646@1] host->base fe108c20
- [ 2.713441@1] pdata->caps 7
- [ 2.716202@1] pdata->caps2 0
- [ 2.719049@1] get property: port, value:0x00000001
- [ 2.725558@1] get property: ocr_avail, value:0x00200000
- [ 2.732051@1] get property: f_min, value:0x000493e0
- [ 2.738560@1] get property: f_max, value:0x02faf080
- [ 2.745053@1] get property: max_req_size, value:0x00020000
- [ 2.751565@1] get property: irq_in, value:0x00000003
- [ 2.758065@1] get property: irq_out, value:0x00000005
- [ 2.764559@1] get property: gpio_cd, str:CARD_6
- [ 2.770548@1] get property: pinname, str:sd
- [ 2.776186@1] get property: jtag_pin, str:CARD_0
- [ 2.782153@1] get property: card_type, value:0x00000005
- [ 2.788663@1] get property: gpio_dat3, str:CARD_4
- [ 2.794645@1] normal card in
- [ 2.835111@1] reg:2620,clearmask=80008,setmask=10001
- [ 2.835150@1] reg:2621,clearmask=ff000000,set pin=64
- [ 2.839461@1] reg:2623,clearmask=7000,setmask=7
- [ 2.843969@1] reg:2620,clearmask=200020,setmask=1
- [ 2.848736@1] reg:2622,clearmask=ff00,set pin=64
- [ 2.853330@1] reg:2623,clearmask=700000,setmask=7
- [ 2.863800@0] sd: new high speed SDHC card at address 0002, clock 35416666, 4-bit-bus-width
- [ 2.865136@2] pdata->caps 107
- [ 2.865139@2] pdata->caps2 0
- [ 2.865142@2] get property: port, value:0x00000000
- [ 2.865144@2] get property: ocr_avail, value:0x00200000
- [ 2.865147@2] get property: f_min, value:0x000493e0
- [ 2.865149@2] get property: f_max, value:0x02faf080
- [ 2.865152@2] get property: max_req_size, value:0x00020000
- [ 2.865158@2] get property: pinname, str:sdio
- [ 2.865161@2] get property: card_type, value:0x00000003
- [ 2.925367@2] mmcblk0: sd:0002 SD4GB 3.77 GiB
- [ 2.926247@2] mmcblk0: p1 p2
- [ 2.937115@3] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
- [ 2.938348@3] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.945639@3] usb 1-1: Product: USB Receiver
- [ 2.949875@3] usb 1-1: Manufacturer: Logitech
- [ 2.960316@3] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-lm1-1/input2
- [ 2.975097@2] [aml_sdio_probe] aml_sdio_probe() success!
- [ 2.976332@2] host->base fe108e00
- [ 2.978110@2] pdata->caps 80000547
- [ 2.981446@2] pdata->caps2 20
- [ 2.984391@2] get property: port, value:0x00000005
- [ 2.990910@2] get property: ocr_avail, value:0x00200080
- [ 2.997403@2] get property: f_min, value:0x000493e0
- [ 3.003893@2] get property: f_max, value:0x08f0d180
- [ 3.010408@2] get property: max_req_size, value:0x00020000
- [ 3.016908@2] get property: pinname, str:emmc
- [ 3.022704@2] get property: card_type, value:0x00000001
- [ 3.029213@2] get property: gpio_dat3, str:BOOT_3
- [ 3.035193@2] [is_emmc_exist] host->storage_flag=2, POR_BOOT_VALUE=3
- [ 3.075100@2] aml_emmc_hw_reset 1340
- [ 3.082814@3] mmc_init_card
- [ 3.125102@3] Indeed it is in host mode hprt0 = 00021501
- [ 3.138294@0] emmc: BKOPS_EN bit is not set
- [ 3.138327@0] ###check hw reset function is already enabled here
- [ 3.143483@0] Activate high speed
- [ 3.145089@2] [aml_sdhc_probe] aml_sdhc_probe() success!
- [ 3.145232@2] [dsp]DSP start addr 0xc5e00000
- [ 3.145256@2] [dsp]register dsp to char divece(257)
- [ 3.145695@2] amlogic audio spdif interface device init!
- [ 3.145751@2] device name=nand_key open error
- [ 3.145754@2] aml_keys: version 0 can not be init c0c2a3cc
- [ 3.145756@2] device name=emmc_key open error
- [ 3.145758@2] aml_keys: version 0 can not be init c0c2a3cc
- [ 3.146425@2] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
- [ 3.147400@2] [AML1216]call aml1216_battery_init, ret = 0
- [ 3.147494@2] [AML1218]call aml1218_battery_init, ret = 0
- [ 3.147533@2] [RN5T618]call rn5t618_battery_probe in
- [ 3.147534@2] [RN5T618]no special flag, clear RTC mem, force using ocv
- [ 3.148351@2] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input/input2
- [ 3.148491@2] [RN5T618]use BSP configed battery parameters
- [ 3.148493@2] [RN5T618] NO BATTERY_PARAMETERS FOUND
- [ 3.148496@2] [RN5T618]rn5t618_otg_change, value:1, is_short:0
- [ 3.148809@2] [RN5T618]set boost en bit, val:33
- [ 3.149343@2] register 0xB3:33
- [ 3.151751@2] ------------[ cut here ]------------
- [ 3.151762@2] WARNING: at kernel/workqueue.c:1368 __queue_work+0x248/0x368()
- [ 3.151765@2] Modules linked in:
- [ 3.151771@2] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.10.80 #1
- [ 3.151788@2] [<c0014d84>] (unwind_backtrace+0x0/0xec) from [<c0011dac>] (show_stack+0x10/0x14)
- [ 3.151796@2] [<c0011dac>] (show_stack+0x10/0x14) from [<c0032198>] (warn_slowpath_common+0x54/0x6c)
- [ 3.151803@2] [<c0032198>] (warn_slowpath_common+0x54/0x6c) from [<c003224c>] (warn_slowpath_null+0x1c/0x24)
- [ 3.151810@2] [<c003224c>] (warn_slowpath_null+0x1c/0x24) from [<c004c094>] (__queue_work+0x248/0x368)
- [ 3.151818@2] [<c004c094>] (__queue_work+0x248/0x368) from [<c004c1f4>] (queue_work_on+0x40/0x4c)
- [ 3.151827@2] [<c004c1f4>] (queue_work_on+0x40/0x4c) from [<c055f268>] (rn5t618_otg_change+0x184/0x1ac)
- [ 3.151835@2] [<c055f268>] (rn5t618_otg_change+0x184/0x1ac) from [<c055f53c>] (rn5t618_battery_probe+0x2ac/0x5b0)
- [ 3.151846@2] [<c055f53c>] (rn5t618_battery_probe+0x2ac/0x5b0) from [<c032c4a0>] (driver_probe_device+0xd4/0x21c)
- [ 3.151855@2] [<c032c4a0>] (driver_probe_device+0xd4/0x21c) from [<c032c694>] (__driver_attach+0x68/0x8c)
- [ 3.151863@2] [<c032c694>] (__driver_attach+0x68/0x8c) from [<c032a948>] (bus_for_each_dev+0x4c/0xa4)
- [ 3.151871@2] [<c032a948>] (bus_for_each_dev+0x4c/0xa4) from [<c032bb88>] (bus_add_driver+0xd0/0x25c)
- [ 3.151878@2] [<c032bb88>] (bus_add_driver+0xd0/0x25c) from [<c032ccb0>] (driver_register+0xa8/0x140)
- [ 3.151885@2] [<c032ccb0>] (driver_register+0xa8/0x140) from [<c055ddf4>] (rn5t618_battery_init+0x10/0x34)
- [ 3.151891@2] [<c055ddf4>] (rn5t618_battery_init+0x10/0x34) from [<c0008544>] (do_one_initcall+0xa0/0x148)
- [ 3.151901@2] [<c0008544>] (do_one_initcall+0xa0/0x148) from [<c0b6ebdc>] (kernel_init_freeable+0x130/0x218)
- [ 3.151911@2] [<c0b6ebdc>] (kernel_init_freeable+0x130/0x218) from [<c07e94ec>] (kernel_init+0x8/0x160)
- [ 3.151919@2] [<c07e94ec>] (kernel_init+0x8/0x160) from [<c000e0a0>] (ret_from_fork+0x14/0x34)
- [ 3.151931@2] ---[ end trace 73d340f38622a0ae ]---
- [ 3.257231@2] [RN5T618]call rn5t618_battery_probe exit, ret:0
- [ 3.257232@2] [RN5T618]call rn5t618_battery_init, ret = 0
- [ 3.257302@2] vdin_drv_init: major 230
- [ 3.257516@2] amvdec_656in module: init.
- [ 3.257520@2] amvdec_656in_init_module:major 229
- [ 3.257903@2] amvdec_656in probe ok.
- [ 3.258314@2] amvdec_csi probe ok.
- [ 3.258407@2] [viuin..]viuin_init_module viuin module init
- [ 3.258638@2] [viuin..]viuin_probe probe ok.
- [ 3.259044@2] [isp..]isp_probe isp probe ok.
- [ 3.259108@2] [sii9233a_drv_init] Ver: 2013Nov12
- [ 3.260268@2] amaudio2: device amaudio2 created
- [ 3.260443@2] wifi_power power_gpio is 6
- [ 3.260447@2] wifi_power power_gpio2 is 123
- [ 3.260745@2] amlogic rfkill init
- [ 3.260781@2] enter bt_probe of_node
- [ 3.260786@2] not get gpio_en
- [ 3.260788@2] not get gpio_wake
- [ 3.285104@3] usb 2-1: new full-speed USB device number 2 using dwc_otg
- [ 3.285209@2] wifi_request_32k_clk : OFF-->ON for bt_rfkill
- [ 3.285212@2] clock_32k_pin(122) : (null)
- [ 3.285221@2] clock_32k_pin(122) : sdio_wifi
- [ 3.285402@3] Indeed it is in host mode hprt0 = 00021501
- [ 3.485336@3] emmc: new high speed MMC card at address 0001, clock 47222222, 8-bit-bus-width
- [ 3.486910@1] UMP: UMP device driver 0000 loaded
- [ 3.487240@1] aml_hw_crypto initialization.
- [ 3.487793@1] usbcore: registered new interface driver snd-usb-audio
- [ 3.488226@1] enter rt5616_modinit
- [ 3.488424@1] dummy_codec_platform_probe
- [ 3.488647@1] == ES8323 == es8323_modinit()
- [ 3.489183@1] enter aml_i2s_dai_probe
- [ 3.489186@1] i2s get no clk src setting in dts, use the default mpll 0
- [ 3.489191@1] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
- [ 3.489347@1] enter aml_pcm_dai_probe
- [ 3.489434@1] [aml-spdif-dai]enter aml_dai_spdif_init
- [ 3.489439@1] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
- [ 3.489440@1] audio_set_958_clk, freq=4,
- [ 3.489447@1] IEC958 16bit
- [ 3.489451@1] hdmitx: audio: aout notify rate 48000
- [ 3.489452@1] hdmitx: audio: aout notify size 16
- [ 3.489454@1] hdmitx: audio: aout notify format CT_PCM
- [ 3.489458@1] hdmitx: audio: audio channel num is 1
- [ 3.489463@1] hdmitx: audio: SPDIF
- [ 3.489474@1] hdmitx: audio: current VIC: 16
- [ 3.489476@1] hdmitx: audio: audio sample rate: 3
- [ 3.489477@1] hdmitx: audio: set audio N para
- [ 3.489485@1] hdmitx: audio: PCM out to HDMI
- [ 3.489487@1] hdmitx: audio: i2s_to_spdif_flag:1
- [ 3.489488@1] hdmitx: audio: Enable audio spdif to HDMI
- [ 3.489493@1] hdmitx: audio: Audio Type: PCM
- [ 3.489540@1] hdmitx: audio: set audio param
- [ 3.489593@1] [aml-spdif-dai]aml_spdif_probe
- [ 3.489750@1] test codec dummy_codec
- [ 3.489753@1] using external codec, index = 1
- [ 3.489754@1] using external dummy codec
- [ 3.489884@1] enter spdif_dit_probe
- [ 3.489885@1] aml_spdif_unmute
- [ 3.490037@1] codec_name = dummy_codec.0
- [ 3.490228@2] enter aml_set_bias_level level: 1
- [ 3.490235@2] enter aml_set_bias_level level: 1
- [ 3.490240@2] enter aml_set_bias_level level: 1
- [ 3.490241@2] enter aml_set_bias_level level: 2
- [ 3.490275@1] enter aml_asoc_init
- [ 3.490294@1] p_aml_audio->hp_disable=1
- [ 3.490297@1] falied to get spk event delay time paraments from dts file
- [ 3.490298@1] spk_event delay_time = 0
- [ 3.652276@3] mmcblk1: emmc:0001 NCard 7.21 GiB
- [ 3.654886@1] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288
- [ 3.665561@3] mmcblk1boot0: emmc:0001 NCard partition 1 2.00 MiB
- [ 3.666250@1] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536
- [ 3.666267@1] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok
- [ 3.666320@2] enter aml_set_bias_level level: 1
- [ 3.666322@2] enter aml_set_bias_level level: 2
- [ 3.688377@3] mmcblk1boot1: emmc:0001 NCard partition 2 2.00 MiB
- [ 3.692050@2] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288
- [ 3.703540@2] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2f460000, size=65536
- [ 3.704360@3] mmcblk1: p1
- [ 3.705631@3] usb 2-1: New USB device found, idVendor=046d, idProduct=c318
- [ 3.705636@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.705640@3] usb 2-1: Product: Logitech Illuminated Keyboard
- [ 3.705643@3] usb 2-1: Manufacturer: Logitech
- [ 3.738810@2] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok
- [ 3.739037@3] Delete invalid mbr partition part e10ccc00, part->partno 1
- [ 3.739588@3] emmc read lba=0x12000, blocks=0x1 OK!
- [ 3.739906@3] emmc read lba=0x12001, blocks=0x1 OK!
- [ 3.739910@3] [mmc_read_partition_tbl] mmc read partition OK!
- [ 3.739911@3] add_emmc_partition
- [ 3.740077@3] [mmcblk1p01] bootloader offset 0x000000000000, size 0x000000400000
- [ 3.740220@3] [mmcblk1p02] reserved offset 0x000002400000, size 0x000004000000
- [ 3.740366@3] [mmcblk1p03] cache offset 0x000006c00000, size 0x000020000000
- [ 3.740520@3] [mmcblk1p04] env offset 0x000027400000, size 0x000000800000
- [ 3.740668@3] [mmcblk1p05] logo offset 0x000028400000, size 0x000002000000
- [ 3.740873@3] [mmcblk1p06] recovery offset 0x00002ac00000, size 0x000002000000
- [ 3.741323@3] [mmcblk1p07] misc offset 0x00002d400000, size 0x000002000000
- [ 3.741494@3] [mmcblk1p08] boot offset 0x00002fc00000, size 0x000002000000
- [ 3.741652@3] [mmcblk1p09] system offset 0x000032400000, size 0x000040000000
- [ 3.741795@3] [mmcblk1p10] data offset 0x000072c00000, size 0x00015b500000
- [ 3.741816@3] card key: card_blk_probe.
- [ 3.741820@3] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220
- [ 3.741823@3] i=0,register --- emmc_key
- [ 3.741825@3] emmc key: emmc_key_init:450 ok.
- [ 3.741896@3] Exit aml_emmc_partition_ops OK.
- [ 3.743079@3] mmcblk1boot1: p1
- [ 3.743095@3] mmcblk1boot1: p1 start 16065 is beyond EOD, truncated
- [ 3.744437@3] mmcblk1boot0: p1
- [ 3.744449@3] mmcblk1boot0: p1 start 16065 is beyond EOD, truncated
- [ 3.898276@2] enter aml_set_bias_level level: 1
- [ 3.898284@2] enter aml_set_bias_level level: 2
- [ 3.898359@2] enter aml_set_bias_level level: 1
- [ 3.898365@2] enter aml_set_bias_level level: 2
- [ 3.898639@3] input: Logitech Logitech Illuminated Keyboard as /devices/lm0/usb2/2-1/2-1:1.0/input/input3
- [ 3.899252@2] enter aml_set_bias_level level: 1
- [ 3.899255@2] enter aml_set_bias_level level: 2
- [ 3.899343@2] -----ext_codec=1---
- [ 3.899358@2] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
- [ 3.899526@2] Netfilter messages via NETLINK v0.30.
- [ 3.899564@2] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 3.900037@2] ctnetlink v0.93: registering with nfnetlink.
- [ 3.900084@2] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 3.900086@2] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 3.900581@2] xt_time: kernel timezone is -0000
- [ 3.900659@2] ipip: IPv4 over IPv4 tunneling driver
- [ 3.901189@2] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.901292@2] arp_tables: (C) 2002 David S. Miller
- [ 3.901323@2] TCP: cubic registered
- [ 3.901325@2] Initializing XFRM netlink socket
- [ 3.901876@2] NET: Registered protocol family 10
- [ 3.902383@2] mip6: Mobile IPv6
- [ 3.902403@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.902543@2] sit: IPv6 over IPv4 tunneling driver
- [ 3.903473@2] NET: Registered protocol family 17
- [ 3.903493@2] NET: Registered protocol family 15
- [ 3.903543@2] Bridge firewalling registered
- [ 3.903606@2] Bluetooth: RFCOMM TTY layer initialized
- [ 3.903619@2] Bluetooth: RFCOMM socket layer initialized
- [ 3.903621@2] Bluetooth: RFCOMM ver 1.11
- [ 3.903624@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 3.903625@2] Bluetooth: BNEP filters: protocol multicast
- [ 3.903631@2] Bluetooth: BNEP socket layer initialized
- [ 3.903633@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 3.903639@2] Bluetooth: HIDP socket layer initialized
- [ 3.903686@2] l2tp_core: L2TP core driver, V2.0
- [ 3.903695@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 3.903697@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- [ 3.903708@2] l2tp_netlink: L2TP netlink interface
- [ 3.903729@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- [ 3.903750@2] l2tp_debugfs: L2TP debugfs support
- [ 3.903751@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- [ 3.903780@2] NET: Registered protocol family 35
- [ 3.903822@2] Key type dns_resolver registered
- [ 4.093042@2] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 4.100856@2] Registering SWP/SWPB emulation handler
- [ 4.105812@2] enter meson_pm_init
- [ 4.109093@3] hid-generic 0003:046D:C318.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-lm0-1/input0
- [ 4.109189@2] enter meson_pm_probe!
- [ 4.109195@2] meson_pm_probe done !
- [ 4.109682@2] regulator-dummy: disabling
- [ 4.132916@2] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
- [ 4.140333@2] ### dt-test ### No testcase data in device tree; not running tests
- [ 4.147740@2] meson_cpufreq: no voltage_control prop
- [ 4.152001@3] input: Logitech Logitech Illuminated Keyboard as /devices/lm0/usb2/2-1/2-1:1.1/input/input4
- [ 4.152463@3] hid-generic 0003:046D:C318.0005: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-lm0-1/input1
- [ 4.175653@2] voltage_control = 0
- [ 4.179991@2] hdmitx: cec: CEC init
- [ 4.182436@3] hdmitx: cec: CEC task process
- [ 4.182573@2] input: cec_input as /devices/virtual/input/input5
- [ 4.182704@2] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
- [ 4.182705@2] ALSA device list:
- [ 4.182707@2] #0: AML-M8AUDIO
- [ 4.204384@2] config uart_ao_ttyS0:: Character length 8bits/char
- [ 4.215083@2] Changing uart_ao_ttyS0: baud from 0 to 115200
- [ 4.235247@0] Freeing unused kernel memory: 356K (c0b6e000 - c0bc7000)
- [ 6.466975@3] tvmode set to 720p
- [ 6.466975@3]
- [ 6.466992@3] mode is 11,sync_duration_den=1,sync_duration_num=60
- [ 6.466997@3] TV mode 720p selected.
- [ 6.467002@3] tvoutc_setmode[489]
- [ 6.467006@3] new mode 720p
- [ 6.467006@3] set ok
- [ 6.467013@3] hdmitx: video: get current mode: 720p
- [ 6.467018@3] is_similar_hdmi_vic[324] vic_old=16,mode_new=11
- [ 6.467023@3] hdmitx: video: get current mode: 720p
- [ 6.467028@3] is_similar_hdmi_vic[324] vic_old=16,mode_new=11
- [ 6.467033@3] hdmitx: system: gate/pwr cmd: 7
- [ 6.467078@3] hdmitx: system: already init VIC = 0 Now VIC = 4
- [ 6.467083@3] hdmitx: system: 4 (cd0,cs0,pm1,vd0,1)
- [ 6.467086@3] hdmitx: system: gate/pwr cmd: 0
- [ 6.467090@3] hdmitx: system: hw reset
- [ 6.468134@3] hdmitx: audio: SPDIF
- [ 6.468189@3] hdmitx: system: reconfig packet setting done
- [ 6.605086@3] hdmitx: system: phy setting done
- [ 6.625079@3] hdmitx: system: set pll
- [ 6.625083@3] hdmitx: system: param->VIC:4
- [ 6.625087@3] mode is: 11
- [ 6.625091@3] VPU_VIU_VENC_MUX_CTRL: 0x22a
- [ 6.625094@3] viu chan = 1
- [ 6.625096@3] VPU_VIU_VENC_MUX_CTRL: 0x22a
- [ 6.625099@3] config HPLL
- [ 6.625102@3] set_hpll_clk_out[62] clk = 2970
- [ 6.645084@3] config HPLL done
- [ 6.645093@3] enc_vpu_bridge_reset[292]
- [ 6.785085@3] hdmitx: system: phy setting done
- [ 6.785089@3] Sink is HDMI device
- [ 6.785094@3] No sink attached
- [ 6.785132@3] hdmitx: audio: audio channel num is 1
- [ 6.785137@3] hdmitx: audio: SPDIF
- [ 6.785148@3] hdmitx: audio: current VIC: 4
- [ 6.785151@3] hdmitx: audio: audio sample rate: 3
- [ 6.785153@3] hdmitx: audio: set audio N para
- [ 6.785160@3] hdmitx: audio: PCM out to HDMI
- [ 6.785164@3] hdmitx: audio: i2s_to_spdif_flag:1
- [ 6.785166@3] hdmitx: audio: Enable audio spdif to HDMI
- [ 6.785172@3] hdmitx: audio: Audio Type: PCM
- [ 6.796113@3] set_vout_mode[249]
- [ 6.877809@3] vfm_map_store:rm default
- [ 6.877809@3]
- [ 6.877860@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- [ 6.877860@3]
- [ 6.879154@3] IEC958_mode_codec= 6,IEC958 type 8 CH PCM
- [ 6.879159@3] last mode 0,now 6
- [ 8.741621@3] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
- [ 8.742441@3] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
- [ 8.743226@3] force enable DISCARD here for ext4 fs
- [ 8.760155@3] checked enable EXT4 DISCARD here
- [ 8.760163@3] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
- [ 8.760168@3] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 15.783409@3] systemd[1]: Failed to insert module 'autofs4'
- [ 15.786609@3] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.786893@3] systemd[1]: systemd 219 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 15.787007@3] systemd[1]: Detected architecture 'arm'.
- [ 15.787105@3] systemd[1]: Running with unpopulated /etc.
- [ 15.788162@3] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.805224@3] systemd[1]: Set hostname to <OpenELEC>.
- [ 15.805306@3] systemd[1]: Initializing machine ID from random generator.
- [ 15.805841@3] systemd[1]: Populated /etc with preset unit settings.
- [ 15.808644@3] systemd[1]: Unit type .busname is not supported on this system.
- [ 15.829567@3] systemd[1]: Unit type .automount is not supported on this system.
- [ 15.840082@3] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 15.840124@3] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- [ 15.840315@3] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.855126@3] systemd[1]: Created slice Root Slice.
- [ 15.855157@3] systemd[1]: Starting Root Slice.
- [ 15.855340@3] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.875162@0] systemd[1]: Listening on udev Control Socket.
- [ 15.875196@0] systemd[1]: Starting udev Control Socket.
- [ 15.875330@0] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.895134@3] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 15.895163@3] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 15.895293@3] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.915124@3] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 15.915152@3] systemd[1]: Starting Journal Socket (/dev/log).
- [ 15.915253@3] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.935118@3] systemd[1]: Listening on Journal Audit Socket.
- [ 15.935145@3] systemd[1]: Starting Journal Audit Socket.
- [ 15.935276@3] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.955130@0] systemd[1]: Listening on Journal Socket.
- [ 15.955167@0] systemd[1]: Starting Journal Socket.
- [ 15.955306@0] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 15.955332@0] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 15.955397@0] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.975128@3] systemd[1]: Reached target Paths.
- [ 15.975155@3] systemd[1]: Starting Paths.
- [ 15.975310@3] config uart_ao_ttyS0:: Character length 8bits/char
- [ 15.995125@3] systemd[1]: Created slice System Slice.
- [ 15.995163@3] systemd[1]: Starting System Slice.
- [ 15.995766@3] systemd[1]: Mounting Variable Directory...
- [ 15.995868@3] config uart_ao_ttyS0:: Character length 8bits/char
- [ 16.015460@2] systemd[1]: Started Debug Shell.
- [ 16.016574@0] config uart_ao_ttyS0:: Character length 8bits/char
- [ 16.035144@2] systemd[1]: Started Debug Shell on /dev/ttyS0.
- [ 16.035159@0] config uart_ao_ttyS0:: Character length 8bits/char
- [ 16.035226@2] systemd[1]: Starting Debug Shell on /dev/ttyS0...
- [ 16.036235@2] systemd[1]: Starting Mounting swapfile...
- [ 16.037578@2] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 16.038661@2] systemd[1]: Mounting Debug File System...
- [ 16.039619@2] systemd[1]: Mounting POSIX Message Queue File System...
- [ 16.040627@2] systemd[1]: Starting Show Version...
- [ 16.042057@2] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 16.043287@2] systemd[1]: Mounting Temporary Directory...
- [ 16.046865@2] systemd[1]: Starting Load Kernel Modules...
- [ 16.048019@2] systemd[1]: Starting Setup machine-id...
- [ 16.048431@2] systemd[1]: Mounted Huge Pages File System.
- [ 16.048744@2] systemd[1]: Created slice User and Session Slice.
- [ 16.048790@2] systemd[1]: Starting User and Session Slice.
- [ 16.048913@2] systemd[1]: Reached target Slices.
- [ 16.048955@2] systemd[1]: Starting Slices.
- [ 16.049197@2] systemd[1]: Listening on udev Kernel Socket.
- [ 16.049248@2] systemd[1]: Starting udev Kernel Socket.
- [ 16.050355@2] systemd[1]: Starting udev Coldplug all Devices...
- [ 16.050696@2] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 16.050745@2] systemd[1]: Starting Delayed Shutdown Socket.
- [ 16.052335@2] systemd[1]: Mounted Debug File System.
- [ 16.052524@2] systemd[1]: Mounted POSIX Message Queue File System.
- [ 16.052675@2] systemd[1]: Mounted Variable Directory.
- [ 16.053553@2] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 16.054769@2] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 16.061393@2] systemd[1]: Mounted Temporary Directory.
- [ 16.068949@2] systemd[1]: Started Show Version.
- [ 16.074825@2] systemd[1]: Started Setup machine-id.
- [ 16.095347@1] gpu cooling register okay with err=0
- [ 16.096348@1] gpu core cooling register okay with err=0
- [ 16.096514@1] Mali: Mali device driver loaded
- [ 16.099775@1] buf[0]=ee,buf[1]=af,err=4
- [ 16.099785@1] M8M2:adc=383,TS_C=14,flag=1
- [ 16.099788@1] efuse_flag=a
- [ 16.099795@1] amlogic_thermal_probe, this chip is trimmed, use thermal
- [ 16.099802@1] amlogic-thermal aml_thermal: amlogic thermal probe start
- [ 16.099808@1] #thermal-cells=7
- [ 16.099812@1] keep_mode is disabled
- [ 16.099815@1] pdata->temp_trip_count=4
- [ 16.099821@1] temperature=70 on trip point=0
- [ 16.099824@1] fixing high_freq=1608001 to 1608000 at trip point 0,level=2
- [ 16.099830@1] fixing low_freq=1608001 to 1608000 at trip point 0,level=2
- [ 16.099835@1] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
- [ 16.099838@1] cpu[0] core num==3
- [ 16.099841@1] gpu[0] core num==5
- [ 16.099844@1] temperature=80 on trip point=1
- [ 16.099847@1] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
- [ 16.099852@1] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
- [ 16.099857@1] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
- [ 16.099860@1] cpu[1] core num==2
- [ 16.099863@1] gpu[1] core num==4
- [ 16.099866@1] temperature=90 on trip point=2
- [ 16.099869@1] fixing high_freq=800001 to 696000 at trip point 2,level=11
- [ 16.099873@1] fixing low_freq=800001 to 696000 at trip point 2,level=11
- [ 16.099878@1] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
- [ 16.099882@1] cpu[2] core num==2
- [ 16.099884@1] gpu[2] core num==3
- [ 16.099887@1] temperature=260 on trip point=3
- [ 16.099890@1] fixing high_freq=-1 to -22 at trip point 3,level=-1
- [ 16.099895@1] fixing low_freq=-1 to -22 at trip point 3,level=-1
- [ 16.099900@1] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
- [ 16.099903@1] cpu[3] core num==-1
- [ 16.099906@1] gpu[3] core num==-1
- [ 16.099909@1] idle interval=1000
- [ 16.099913@1] pdata->name:aml_thermal, pdata:e09d6a00
- [ 16.099916@1] amlogic_thermal_init_from_dts, 998
- [ 16.099920@1] amlogic_thermal_initialize, 1014, pdata:e09d6a00
- [ 16.102864@1] tmp_trip[0].cpu_core_upper=1
- [ 16.102880@1] tmp_trip[1].cpu_core_upper=2
- [ 16.102887@1] tmp_trip[2].cpu_core_upper=2
- [ 16.102895@1] tmp_trip[3].cpu_core_upper=-1
- [ 16.102902@1] aml_thermal bind thermal-cpucore-0 okay !
- [ 16.102929@1] aml_thermal bind thermal-cpufreq-0 okay !
- [ 16.102933@1] tmp_trip[0].gpu_core_upper=1
- [ 16.102941@1] tmp_trip[1].gpu_core_upper=2
- [ 16.102948@1] tmp_trip[2].gpu_core_upper=3
- [ 16.102955@1] tmp_trip[3].gpu_core_upper=-1
- [ 16.102962@1] aml_thermal bind thermal-gpucore-0 okay !
- [ 16.102967@1] pdata->tmp_trip[0].gpu_lower_level=1
- [ 16.102970@1] pdata->tmp_trip[0].gpu_upper_level=1
- [ 16.102978@1] pdata->tmp_trip[1].gpu_lower_level=2
- [ 16.102982@1] pdata->tmp_trip[1].gpu_upper_level=2
- [ 16.102992@1] pdata->tmp_trip[2].gpu_lower_level=3
- [ 16.102995@1] pdata->tmp_trip[2].gpu_upper_level=3
- [ 16.103002@1] pdata->tmp_trip[3].gpu_lower_level=-1
- [ 16.103005@1] pdata->tmp_trip[3].gpu_upper_level=-1
- [ 16.103012@1] aml_thermal bind thermal-gpufreq-0 okay !
- [ 16.103141@1] amlogic: Kernel Thermal management registered
- [ 16.103150@1] amlogic-thermal aml_thermal: amlogic thermal probe done
- [ 16.122021@2] systemd[1]: Started Mounting swapfile.
- [ 16.122369@1] dhd_module_init: Enter
- [ 16.122377@1] wifi_setup_dt
- [ 16.122382@1] wifi_request_32k_clk : ON-->ON for sdio_wifi
- [ 16.122387@1] interrupt_pin(133) : (null)
- [ 16.122403@1] reg:2620,clearmask=100010,setmask=0
- [ 16.122407@1] reg:2622,clearmask=ff,set pin=133
- [ 16.122411@1] reg:2623,clearmask=70000,setmask=4
- [ 16.122415@1] interrupt_pin(133) : sdio_wifi
- [ 16.122418@1] power_on_pin(6) : (null)
- [ 16.122425@1] power_on_pin(6) : sdio_wifi
- [ 16.122429@1] power_on_pin2(123) : (null)
- [ 16.122436@1] power_on_pin2(123) : sdio_wifi
- [ 16.122458@1] WIFI Disable! 6
- [ 16.133953@2] systemd[1]: Reached target Swap.
- [ 16.133995@2] systemd[1]: Starting Swap.
- [ 16.134823@2] systemd[1]: Starting Journal Service...
- [ 16.136456@2] systemd[1]: Started Rebuild Hardware Database.
- [ 16.137418@2] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 16.137792@2] systemd[1]: Started Debug /var/log relink.
- [ 16.139372@2] systemd[1]: Starting Setup Timezone data...
- [ 16.147768@3] systemd[1]: Started Setup Timezone data.
- [ 16.155272@0] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 16.159693@0] systemd[1]: Reached target Local File Systems (Pre).
- [ 16.159776@0] systemd[1]: Starting Local File Systems (Pre).
- [ 16.159865@0] systemd[1]: Reached target Local File Systems.
- [ 16.159934@0] systemd[1]: Starting Local File Systems.
- [ 16.159979@0] systemd[1]: Started Rebuild Journal Catalog.
- [ 16.213590@0] systemd[1]: Started Journal Service.
- [ 16.233980@2] systemd-journald[1990]: Received request to flush runtime journal from PID 1
- [ 16.323452@1] WIFI Enable! 6
- [ 17.044194@2] ionvideo open
- [ 17.044299@2] ionvideo_stop_generating!!!!
- [ 17.044313@2] ionvideo release
- [ 17.046367@0] amlvideo openamlvideo close
- [ 17.515094@0] [aml_sdio_timeout] time_start_cnt:991
- [ 17.515094@0] hdmitx: cec: CEC node init
- [ 19.205100@0] hdmitx: cec: cec_func_config: 0xf; P_AO_DEBUG_REG0:0xf
- [ 19.205106@0] hdmitx: cec: enable:int mask:0x6
- [ 19.205980@0] hdmitx: cec: CEC: start poll dev
- [ 17.515113@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x1f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940
- [ 17.515113@1] [aml_sdio_timeout] time_start_cnt:999
- [ 17.515113@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940
- [ 17.515113@1]
- [ 19.515091@1] [aml_sdio_timeout] time_start_cnt:996
- [ 19.515091@1] <4>[ 19.523242@1] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 19.524558@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 19.526308@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 19.528676@1] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 19.568067@1] sdio: new high speed SDIO card at address 0001, clock 35416666, 4-bit-bus-width
- [ 19.570650@1] [sdio_reinit] finish
- [ 19.570860@1] =========== WLAN placed in POWER ON ========
- [ 19.571266@1] bcmsdh_register: Linux Kernel SDIO/MMC Driver
- [ 19.571397@1] dhd_customer_oob_irq_map: customer specific Host GPIO number is (100)
- [ 19.575907@1] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
- [ 19.576278@1] DHD: dongle ram size is set to 294912(orig 294912) at 0x0
- [ 19.576484@1] dhdsdio_probe: Disable prop_txstatus
- [ 19.576914@1] wl_create_event_handler(): thread:wl_event_handler:a7e started
- [ 19.576924@1] init wlan_priv_wake
- [ 19.576938@3] tsk Enter, tsk = 0xf077d4cc
- [ 19.577067@1] dhd_attach(): thread:dhd_watchdog_thread:a80 started
- [ 19.577096@1] dhd_attach(): thread:dhd_dpc:a81 started
- [ 19.577121@1] dhd_attach(): thread:dhd_sysioc:a82 started
- [ 19.578013@1] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 19.578253@1] =========== WLAN placed in RESET ========
- [ 19.578264@1] init wifi power_wake lock
- [ 19.578355@1]
- [ 19.578355@1] Dongle Host Driver, version 1.88.45.4 (r420671)
- [ 19.578355@1] Compiled in drivers/net/wireless/bcmdhd on Jun 20 2015 at 11:06:06
- [ 19.578364@1] dhd_module_init: Exit error=0
- [ 19.584012@1] The PHY does not support set_wol, was CONFIG_MICREL_PHY enabled?
- [ 19.515105@2] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f001f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940
- [ 19.515105@2]
- [ 19.648978@2] Console: switching to colour dummy device 80x30
- [ 19.693354@0] cur_mode = 0
- [ 19.693363@0] [0x0] = 0x1dd0190
- [ 19.693367@0] [0x4] = 0xf800ca
- [ 19.693370@0] [0x8] = 0x82006e
- [ 19.693373@0] [0xc] = 0x3c0030
- [ 19.693376@0] [0x10] = 0x30fa0013
- [ 19.693379@0] [0x18] = 0x6f19000
- [ 19.693382@0] [0x1c] = 0x9f40
- [ 19.693395@0] [0x20] = 0x0
- [ 19.693401@0] [0x24] = 0x0
- [ 19.693405@0] [0x28] = 0x0
- [ 19.693408@0] set_remote_mode[69]
- [ 19.807002@0] hdmitx: cec: hw reset :logical addr:0x14
- [ 19.807011@0] hdmitx: cec: CEC: poll online logic device: 0x4 BOOL: 0
- [ 19.807015@0] hdmitx: cec: player_dev[0]:0x4
- [ 19.807018@0] hdmitx: cec: physical address:0x1000
- [ 19.807120@0] hdmitx: cec: Set logical address: 4
- [ 20.407187@3] type=1325 audit(3.580:2): table=filter family=2 entries=4
- [ 20.413138@3] type=1325 audit(3.580:3): table=mangle family=2 entries=6
- [ 20.418903@3] type=1325 audit(3.590:4): table=nat family=2 entries=5
- [ 20.453289@0] type=1325 audit(3.620:5): table=mangle family=2 entries=6
- [ 20.459489@0] type=1325 audit(3.630:6): table=mangle family=2 entries=10
- [ 20.470886@1] netdev_open
- [ 20.470896@1] Ethernet reset
- [ 20.470901@1] NET MDA descpter start addr=e1707000
- [ 20.471651@1] phy_interface = 1
- [ 20.471658@1] aml_phy_init: trying to attach to 0:00
- [ 20.471989@1] --1--write mac add to:e1782fc8: 4a fc 39 c9 74 38 |J.9.t8|
- [ 20.472006@1] name=emmc_key nand_key
- [ 20.472010@1] device name=nand_key open error
- [ 20.472014@1] aml_keys: version 0 can not be init c0c2a3cc
- [ 20.472017@1] name=emmc_key emmc_key
- [ 20.476656@1] emmc read lba=0x12020, blocks=0x100 OK!
- [ 20.477158@1] register_aes_algorithm:488,new way
- [ 20.483205@1] ret = 17
- [ 20.483205@1] print_buff=c4:4e:ac:06:ff:42
- [ 20.483218@1] 0 : 196
- [ 20.483223@1] 1 : 78
- [ 20.483230@1] 2 : 172
- [ 20.483235@1] 3 : 6
- [ 20.483241@1] 4 : 255
- [ 20.483245@1] 5 : 66
- [ 20.483249@1] --2--write mac add to:e1782fc8: c4 4e ac 06 ff 42 |.N...B|
- [ 20.483268@1] write mac add to:e1782fc8: c4 4e ac 06 ff 42 |.N...B|
- [ 20.483285@1] Current DMA mode=0, set mode=621c100
- [ 20.483309@1] eth0: opened (irq 40).
- [ 20.483318@1] ether leave promiscuous mode
- [ 20.483323@1] ether leave all muticast mode
- [ 20.483328@1] changed the Multicast,mcount=1
- [ 20.483337@1] add mac address:33:33:00:00:00:01,bit=1
- [ 20.483343@1] set hash low=2,high=0
- [ 20.483348@1] changed the filter setting to :4
- [ 20.483358@1] changed the Multicast,mcount=1
- [ 20.483366@1] add mac address:33:33:00:00:00:01,bit=1
- [ 20.483407@1] changed the Multicast,mcount=2
- [ 20.483415@1] add mac address:33:33:00:00:00:01,bit=1
- [ 20.483423@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 20.483427@1] set hash low=2,high=1
- [ 20.483434@1] changed the filter setting to :4
- [ 20.483447@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 20.507343@3] dhd_open: Enter e0e61000
- [ 20.507356@3]
- [ 20.507356@3] Dongle Host Driver, version 1.88.45.4 (r420671)
- [ 20.507356@3] Compiled in drivers/net/wireless/bcmdhd on Jun 20 2015 at 11:06:06
- [ 20.507363@3] wl_android_wifi_on in 1
- [ 20.507367@3] wl_android_wifi_on in 2: g_wifi_on=0
- [ 20.507375@3] WIFI Disable! 6
- [ 20.707187@3] WIFI Enable! 6
- [ 20.860049@2] [aml_dai_spdif_shutdown 407]8chPCM output:disable aml_spdif_play()
- [ 20.860057@2] aml_i2s_close device type 2
- [ 20.907316@3] sdio_reset_comm():
- [ 20.921358@1] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 20.923093@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 20.924824@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 20.928092@1] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 20.977234@1] [sdio_reinit] finish
- [ 20.983404@0] buf=0
- [ 20.983411@0] IEC958_mode_raw=0
- [ 20.983437@0] IEC958_mode_codec= 0,IEC958 type 2 CH PCM
- [ 20.983441@0] last mode 6,now 0
- [ 20.984835@0] ----aml_hw_iec958_init,runtime->rate=44100--
- [ 20.984842@0] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
- [ 20.984846@0] audio_set_958_clk, freq=5,
- [ 20.984852@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
- [ 20.984856@0] iec958 mode PCM16
- [ 20.984862@0] IEC958 16bit
- [ 20.984866@0] hdmitx: audio: aout notify rate 44100
- [ 20.984869@0] hdmitx: audio: aout notify size 16
- [ 20.984875@0] hdmitx: audio: audio channel num is 1
- [ 20.984882@0] hdmitx: audio: SPDIF
- [ 20.984893@0] hdmitx: audio: current VIC: 4
- [ 20.984896@0] hdmitx: audio: audio sample rate: 2
- [ 20.984899@0] hdmitx: audio: set audio N para
- [ 20.984907@0] hdmitx: audio: PCM out to HDMI
- [ 20.984910@0] hdmitx: audio: i2s_to_spdif_flag:1
- [ 20.984913@0] hdmitx: audio: Enable audio spdif to HDMI
- [ 20.984919@0] hdmitx: audio: Audio Type: PCM
- [ 20.984963@0] hdmitx: audio: set audio param
- [ 20.984967@0] [aml-spdif-dai]spdif dma ef400000,phy addr 2f600000
- [ 20.985008@1] enter aml_set_bias_level level: 1
- [ 20.985014@1] enter aml_set_bias_level level: 2
- [ 20.985261@0] ----aml_hw_iec958_init,runtime->rate=44100--
- [ 20.985268@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
- [ 20.985274@0] iec958 mode PCM16
- [ 20.985279@0] IEC958 16bit
- [ 20.985284@0] hdmitx: audio: aout notify rate 44100
- [ 20.985287@0] hdmitx: audio: aout notify size 16
- [ 20.985291@0] hdmitx: audio: audio channel num is 1
- [ 20.985297@0] hdmitx: audio: SPDIF
- [ 20.985308@0] hdmitx: audio: current VIC: 4
- [ 20.985311@0] hdmitx: audio: audio sample rate: 2
- [ 20.985314@0] hdmitx: audio: set audio N para
- [ 20.985321@0] hdmitx: audio: PCM out to HDMI
- [ 20.985325@0] hdmitx: audio: i2s_to_spdif_flag:1
- [ 20.985330@0] hdmitx: audio: Enable audio spdif to HDMI
- [ 20.985335@0] hdmitx: audio: Audio Type: PCM
- [ 20.985376@0] hdmitx: audio: set audio param
- [ 20.985380@0] [aml-spdif-dai]spdif dma ef400000,phy addr 2f600000
- [ 20.985420@0] enter aml_set_bias_level level: 1
- [ 20.985425@0] enter aml_set_bias_level level: 2
- [ 20.992061@0] [aml-spdif-dai]aiu 958 playback enable
- [ 21.082556@1] =========== WLAN going back to live ========
- [ 21.082887@1]
- [ 21.082887@1]
- [ 21.082887@1] dhd_bus_devreset: == WLAN ON ==
- [ 21.082895@1] dhd_bus_devreset called when dongle is not in reset
- [ 21.082899@1] Will call dhd_bus_start instead
- [ 21.082947@1] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm40183b2.bin
- [ 21.082960@1] dhd_conf_set_nv_name_by_chip: nvram_path=/lib/firmware/brcm/ap6330_nvram.txt
- [ 21.083139@1] dhd_conf_read_config: Ignore config file /etc/wifi/config.txt
- [ 21.083145@1] Final fw_path=/lib/firmware/brcm/fw_bcm40183b2.bin
- [ 21.083148@1] Final nv_path=/lib/firmware/brcm/ap6330_nvram.txt
- [ 21.083151@1] Final conf_path=/etc/wifi/config.txt
- [ 21.131050@1] NVRAM version: AP6330_NVRAM_V1.0_20121130
- [ 21.131603@1] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 21.293362@2] tvmode set to 720p
- [ 21.293375@2] don't set the same mode as current.
- [ 21.395203@1] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- [ 21.395318@1] bcmsdh_set_drvdata: Enter
- [ 21.395323@1] bcmsdh_register_oob_intr: Enter
- [ 21.395327@1] bcmsdh_register_oob_intr: IRQ=100 Type=414
- [ 21.396688@1] dhd_conf_set_band: Set band 0
- [ 21.398556@3] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=04:e6:76:28:60:dd
- [ 21.398563@3] dhd_conf_set_country: Set country ALL, revision 0
- [ 21.471494@3] Country code: ALL (ALL/0)
- [ 21.471808@3] dhd_conf_set_roam: Set roam_off 1
- [ 21.474144@3] dhdcdc_set_ioctl: msg->status:ffffffe9
- [ 21.482396@3] Driver: 1.88.45.4 (r420671)
- [ 21.482396@3] Firmware: wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5
- [ 21.482910@3] wl_android_wifi_on: Success
- [ 21.499251@3] dhd_open: Exit ret=0
- [ 24.045119@3] hdmitx: cec: cec node init: cec features ok !
- [ 24.465224@1] libphy: 0:00 - Link is Up - 100/Full
- [ 24.465242@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 24.465290@1] changed the Multicast,mcount=3
- [ 24.465297@1] add mac address:33:33:00:00:00:01,bit=1
- [ 24.465301@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 24.465306@1] add mac address:33:33:ff:06:ff:42,bit=55
- [ 24.465309@1] set hash low=2,high=800001
- [ 24.465313@1] changed the filter setting to :4
- [ 28.197892@0] changed the Multicast,mcount=2
- [ 28.197903@0] add mac address:33:33:00:00:00:01,bit=1
- [ 28.197908@0] add mac address:01:00:5e:00:00:01,bit=32
- [ 28.197911@0] set hash low=2,high=1
- [ 28.197916@0] changed the filter setting to :4
- [ 28.198054@0] changed the Multicast,mcount=1
- [ 28.198059@0] add mac address:01:00:5e:00:00:01,bit=32
- [ 28.198063@0] set hash low=0,high=1
- [ 28.198066@0] changed the filter setting to :4
- [ 30.076462@2] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
- [ 55.754865@3] input: Logitech Unifying Device. Wireless PID:1025 as /devices/lm1/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/input/input6
- [ 55.755310@3] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-lm1-1:1
- [ 81.363536@0] [aml-spdif-dai]aiu 958 playback disable
- [ 81.363556@0] ----aml_hw_iec958_init,runtime->rate=44100--
- [ 81.363558@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
- [ 81.363561@0] iec958 mode PCM16
- [ 81.363564@0] IEC958 16bit
- [ 81.363568@0] hdmitx: audio: aout notify rate 44100
- [ 81.363569@0] hdmitx: audio: aout notify size 16
- [ 81.363572@0] hdmitx: audio: audio channel num is 1
- [ 81.363577@0] hdmitx: audio: SPDIF
- [ 81.363585@0] hdmitx: audio: current VIC: 4
- [ 81.363586@0] hdmitx: audio: audio sample rate: 2
- [ 81.363587@0] hdmitx: audio: set audio N para
- [ 81.363593@0] hdmitx: audio: PCM out to HDMI
- [ 81.363595@0] hdmitx: audio: i2s_to_spdif_flag:1
- [ 81.363595@0] hdmitx: audio: Enable audio spdif to HDMI
- [ 81.363599@0] hdmitx: audio: Audio Type: PCM
- [ 81.363641@0] hdmitx: audio: set audio param
- [ 81.363643@0] [aml-spdif-dai]spdif dma ef400000,phy addr 2f600000
- [ 81.363684@0] enter aml_set_bias_level level: 1
- [ 81.363686@0] enter aml_set_bias_level level: 2
- [ 86.671855@0] [aml-spdif-dai]aiu 958 playback enable
- [ 114.779551@1] tvmode set to 1080p
- [ 114.779566@1] mode is 15,sync_duration_den=1,sync_duration_num=60
- [ 114.779572@1] TV mode 1080p selected.
- [ 114.779578@1] tvoutc_setmode[489]
- [ 114.779582@1] new mode 1080p set ok
- [ 114.779588@1] hdmitx: video: get current mode: 1080p
- [ 114.779592@1] is_similar_hdmi_vic[324] vic_old=4,mode_new=15
- [ 114.779597@1] hdmitx: video: get current mode: 1080p
- [ 114.779603@1] is_similar_hdmi_vic[324] vic_old=4,mode_new=15
- [ 114.779608@1] hdmitx: system: gate/pwr cmd: 7
- [ 114.779652@1] hdmitx: system: already init VIC = 0 Now VIC = 16
- [ 114.779658@1] hdmitx: system: 16 (cd0,cs0,pm1,vd0,1)
- [ 114.779661@1] hdmitx: system: gate/pwr cmd: 0
- [ 114.779666@1] hdmitx: system: hw reset
- [ 114.780709@1] hdmitx: audio: SPDIF
- [ 114.780763@1] hdmitx: system: reconfig packet setting done
- [ 114.915086@1] hdmitx: system: phy setting done
- [ 114.935090@1] hdmitx: system: set pll
- [ 114.935095@1] hdmitx: system: param->VIC:16
- [ 114.935101@1] mode is: 15
- [ 114.935105@1] VPU_VIU_VENC_MUX_CTRL: 0x22a
- [ 114.935108@1] viu chan = 1
- [ 114.935111@1] VPU_VIU_VENC_MUX_CTRL: 0x22a
- [ 114.935114@1] config HPLL
- [ 114.935118@1] set_hpll_clk_out[62] clk = 2970
- [ 114.955091@1] config HPLL done
- [ 114.955101@1] enc_vpu_bridge_reset[292]
- [ 115.095096@0] hdmitx: system: phy setting done
- [ 115.095102@0] Sink is HDMI device
- [ 115.095113@0] No sink attached
- [ 115.095153@0] hdmitx: audio: audio channel num is 1
- [ 115.095160@0] hdmitx: audio: SPDIF
- [ 115.095171@0] hdmitx: audio: current VIC: 16
- [ 115.095174@0] hdmitx: audio: audio sample rate: 2
- [ 115.095177@0] hdmitx: audio: set audio N para
- [ 115.095185@0] hdmitx: audio: PCM out to HDMI
- [ 115.095189@0] hdmitx: audio: i2s_to_spdif_flag:1
- [ 115.095191@0] hdmitx: audio: Enable audio spdif to HDMI
- [ 115.095197@0] hdmitx: audio: Audio Type: PCM
- [ 115.106141@0] set_vout_mode[249]
- [ 196.177305@0] [aml-spdif-dai]aiu 958 playback disable
- [ 196.177328@0] ----aml_hw_iec958_init,runtime->rate=44100--
- [ 196.177333@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
- [ 196.177337@0] iec958 mode PCM16
- [ 196.177343@0] IEC958 16bit
- [ 196.177348@0] hdmitx: audio: aout notify rate 44100
- [ 196.177352@0] hdmitx: audio: aout notify size 16
- [ 196.177357@0] hdmitx: audio: audio channel num is 1
- [ 196.177363@0] hdmitx: audio: SPDIF
- [ 196.177374@0] hdmitx: audio: current VIC: 16
- [ 196.177377@0] hdmitx: audio: audio sample rate: 2
- [ 196.177380@0] hdmitx: audio: set audio N para
- [ 196.177387@0] hdmitx: audio: PCM out to HDMI
- [ 196.177391@0] hdmitx: audio: i2s_to_spdif_flag:1
- [ 196.177393@0] hdmitx: audio: Enable audio spdif to HDMI
- [ 196.177399@0] hdmitx: audio: Audio Type: PCM
- [ 196.177442@0] hdmitx: audio: set audio param
- [ 196.177446@0] [aml-spdif-dai]spdif dma ef400000,phy addr 2f600000
- [ 196.177477@0] enter aml_set_bias_level level: 1
- [ 196.177481@0] enter aml_set_bias_level level: 2
- [ 206.177692@0] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4
- [ 206.177699@0] audio_set_958_clk, freq=4,
- [ 206.177707@0] IEC958 16bit
- [ 206.177712@0] hdmitx: audio: aout notify rate 48000
- [ 206.177719@0] hdmitx: audio: aout notify size 16
- [ 206.177725@0] hdmitx: audio: audio channel num is 1
- [ 206.177732@0] hdmitx: audio: SPDIF
- [ 206.177743@0] hdmitx: audio: current VIC: 16
- [ 206.177746@0] hdmitx: audio: audio sample rate: 3
- [ 206.177749@0] hdmitx: audio: set audio N para
- [ 206.177756@0] hdmitx: audio: PCM out to HDMI
- [ 206.177760@0] hdmitx: audio: i2s_to_spdif_flag:1
- [ 206.177762@0] hdmitx: audio: Enable audio spdif to HDMI
- [ 206.177768@0] hdmitx: audio: Audio Type: PCM
- [ 206.177809@0] hdmitx: audio: set audio param
- [ 206.177814@0] aml_i2s_close device type 2
- [ 211.185131@0] enter aml_set_bias_level level: 1
- [ 211.185139@0] enter aml_set_bias_level level: 2
- amlogic:~ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement