Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.4.0-59-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 (Ubuntu 4.4.0-59.80-generic 4.4.35)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=1f5c10d1-ae31-4d4b-a3c9-44f72a10685a ro quiet splash vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
- [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b5d7efff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000b5d7f000-0x00000000b5d85fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000b5d86000-0x00000000b61cafff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000b61cb000-0x00000000b675bfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000b675c000-0x00000000c8daffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000c8db0000-0x00000000c8e39fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000c8e3a000-0x00000000c8e97fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000c8e98000-0x00000000c8fc8fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000c8fc9000-0x00000000c9ffefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.8 present.
- [ 0.000000] DMI: MSI MS-7817/H81M-P33 (MS-7817), BIOS V1.2 09/17/2013
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-E7FFF uncachable
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
- [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
- [ 0.000000] 2 base 0220000000 mask 7FF0000000 write-back
- [ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
- [ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
- [ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
- [ 0.000000] 6 base 00CB000000 mask 7FFF000000 uncachable
- [ 0.000000] 7 base 022FE00000 mask 7FFFE00000 uncachable
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
- [ 0.000000] original variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
- [ 0.000000] reg 1, base: 8GB, range: 512MB, type WB
- [ 0.000000] reg 2, base: 8704MB, range: 256MB, type WB
- [ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC
- [ 0.000000] reg 4, base: 3328MB, range: 256MB, type UC
- [ 0.000000] reg 5, base: 3264MB, range: 64MB, type UC
- [ 0.000000] reg 6, base: 3248MB, range: 16MB, type UC
- [ 0.000000] reg 7, base: 8958MB, range: 2MB, type UC
- [ 0.000000] total RAM covered: 8110M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 9 lose cover RAM: 0G
- [ 0.000000] New variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
- [ 0.000000] reg 2, base: 3GB, range: 128MB, type WB
- [ 0.000000] reg 3, base: 3200MB, range: 32MB, type WB
- [ 0.000000] reg 4, base: 3232MB, range: 16MB, type WB
- [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB
- [ 0.000000] reg 6, base: 8GB, range: 512MB, type WB
- [ 0.000000] reg 7, base: 8704MB, range: 256MB, type WB
- [ 0.000000] reg 8, base: 8958MB, range: 2MB, type UC
- [ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
- [ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
- [ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
- [ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
- [ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
- [ 0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x3322c000-0x3590dfff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
- [ 0.000000] ACPI: XSDT 0x00000000C8F9C088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 0x00000000C8FA9830 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: DSDT 0x00000000C8F9C1A8 00D684 (v02 ALASKA A M I 00000031 INTL 20120711)
- [ 0.000000] ACPI: FACS 0x00000000C8FC7080 000040
- [ 0.000000] ACPI: APIC 0x00000000C8FA9940 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FPDT 0x00000000C8FA99B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: ASF! 0x00000000C8FA9A00 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
- [ 0.000000] ACPI: LPIT 0x00000000C8FA9AA8 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
- [ 0.000000] ACPI: SSDT 0x00000000C8FA9B08 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
- [ 0.000000] ACPI: SSDT 0x00000000C8FAA048 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
- [ 0.000000] ACPI: MCFG 0x00000000C8FAAB20 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
- [ 0.000000] ACPI: HPET 0x00000000C8FAAB60 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
- [ 0.000000] ACPI: SSDT 0x00000000C8FAAB98 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
- [ 0.000000] ACPI: SSDT 0x00000000C8FAAF08 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
- [ 0.000000] ACPI: DMAR 0x00000000C8FAE3F0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
- [ 0.000000] ACPI: SSDT 0x00000000C8FAE4A8 000A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x22fdf5000-0x22fdf9fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fdfffff]
- [ 0.000000] Device empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b5d7efff]
- [ 0.000000] node 0: [mem 0x00000000b5d86000-0x00000000b61cafff]
- [ 0.000000] node 0: [mem 0x00000000b675c000-0x00000000c8daffff]
- [ 0.000000] node 0: [mem 0x00000000c8e3a000-0x00000000c8e97fff]
- [ 0.000000] node 0: [mem 0x00000000c9fff000-0x00000000c9ffffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fdfffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
- [ 0.000000] On node 0 totalpages: 2065939
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 12770 pages used for memmap
- [ 0.000000] DMA32 zone: 817271 pages, LIFO batch:31
- [ 0.000000] Normal zone: 19448 pages used for memmap
- [ 0.000000] Normal zone: 1244672 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb5d7f000-0xb5d85fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb61cb000-0xb675bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xc8db0000-0xc8e39fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xc8e98000-0xc8fc8fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xc8fc9000-0xc9ffefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
- [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88022fa00000 s98264 r8192 d28712 u524288
- [ 0.000000] pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2033636
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic root=UUID=1f5c10d1-ae31-4d4b-a3c9-44f72a10685a ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 8007408K/8263756K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 256348K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:33024 nr_irqs:456 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 3000.217 MHz processor
- [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.43 BogoMIPS (lpj=12000868)
- [ 0.000024] pid_max: default: 32768 minimum: 301
- [ 0.000028] ACPI: Core revision 20150930
- [ 0.008867] ACPI: 6 ACPI AML tables successfully acquired and loaded
- [ 0.008881] Security Framework initialized
- [ 0.008882] Yama: becoming mindful.
- [ 0.008894] AppArmor: AppArmor initialized
- [ 0.009268] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.010429] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.010949] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.010957] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.011119] Initializing cgroup subsys io
- [ 0.011121] Initializing cgroup subsys memory
- [ 0.011126] Initializing cgroup subsys devices
- [ 0.011128] Initializing cgroup subsys freezer
- [ 0.011130] Initializing cgroup subsys net_cls
- [ 0.011131] Initializing cgroup subsys perf_event
- [ 0.011133] Initializing cgroup subsys net_prio
- [ 0.011135] Initializing cgroup subsys hugetlb
- [ 0.011136] Initializing cgroup subsys pids
- [ 0.011153] CPU: Physical Processor ID: 0
- [ 0.011154] CPU: Processor Core ID: 0
- [ 0.011938] mce: CPU supports 9 MCE banks
- [ 0.011951] CPU0: Thermal monitoring enabled (TM1)
- [ 0.011959] process: using mwait in idle threads
- [ 0.011961] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
- [ 0.011962] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
- [ 0.012223] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
- [ 0.022767] ftrace: allocating 32064 entries in 126 pages
- [ 0.032979] smpboot: APIC(0) Converting physical 0 to logical package 0
- [ 0.032981] smpboot: Max logical packages: 1
- [ 0.032984] DMAR: Host address width 39
- [ 0.032985] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
- [ 0.032992] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
- [ 0.032992] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.032995] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
- [ 0.032996] DMAR: RMRR base: 0x000000c9ea8000 end: 0x000000c9eb6fff
- [ 0.032997] DMAR: RMRR base: 0x000000cb000000 end: 0x000000cf1fffff
- [ 0.032999] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
- [ 0.033000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
- [ 0.033000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
- [ 0.033240] DMAR-IR: Enabled IRQ remapping in x2apic mode
- [ 0.033241] x2apic enabled
- [ 0.033246] Switched APIC routing to cluster x2apic.
- [ 0.033650] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.073337] TSC deadline timer enabled
- [ 0.073339] smpboot: CPU0: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
- [ 0.073351] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
- [ 0.073367] ... version: 3
- [ 0.073367] ... bit width: 48
- [ 0.073368] ... generic registers: 8
- [ 0.073368] ... value mask: 0000ffffffffffff
- [ 0.073369] ... max period: 0000ffffffffffff
- [ 0.073370] ... fixed-purpose events: 3
- [ 0.073370] ... event mask: 00000007000000ff
- [ 0.073983] x86: Booting SMP configuration:
- [ 0.073984] .... node #0, CPUs: #1
- [ 0.075168] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
- [ 0.078072] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.078125] #2
- [ 0.079301] microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
- [ 0.082226] #3
- [ 0.083399] microcode: CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
- [ 0.086288] x86: Booted up 1 node, 4 CPUs
- [ 0.086290] smpboot: Total of 4 processors activated (24001.73 BogoMIPS)
- [ 0.089254] devtmpfs: initialized
- [ 0.090953] evm: security.selinux
- [ 0.090954] evm: security.SMACK64
- [ 0.090955] evm: security.SMACK64EXEC
- [ 0.090955] evm: security.SMACK64TRANSMUTE
- [ 0.090956] evm: security.SMACK64MMAP
- [ 0.090957] evm: security.ima
- [ 0.090957] evm: security.capability
- [ 0.091000] PM: Registering ACPI NVS region [mem 0xb5d7f000-0xb5d85fff] (28672 bytes)
- [ 0.091001] PM: Registering ACPI NVS region [mem 0xc8e98000-0xc8fc8fff] (1249280 bytes)
- [ 0.091069] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.091132] pinctrl core: initialized pinctrl subsystem
- [ 0.091218] RTC time: 7:06:07, date: 02/02/17
- [ 0.091306] NET: Registered protocol family 16
- [ 0.102283] cpuidle: using governor ladder
- [ 0.114285] cpuidle: using governor menu
- [ 0.114291] PCCT header not found.
- [ 0.114348] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.114350] ACPI: bus type PCI registered
- [ 0.114351] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.114407] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.114409] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 0.114416] PCI: Using configuration type 1 for base access
- [ 0.114516] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.114520] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
- [ 0.122284] ACPI: Added _OSI(Module Device)
- [ 0.122285] ACPI: Added _OSI(Processor Device)
- [ 0.122286] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.122287] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.125014] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.126855] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.127384] ACPI: Dynamic OEM Table Load:
- [ 0.127388] ACPI: SSDT 0xFFFF880225FDF400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
- [ 0.127862] ACPI: Dynamic OEM Table Load:
- [ 0.127865] ACPI: SSDT 0xFFFF880225DB9800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
- [ 0.128365] ACPI: Dynamic OEM Table Load:
- [ 0.128368] ACPI: SSDT 0xFFFF88022586C800 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
- [ 0.129117] ACPI: Interpreter enabled
- [ 0.129135] ACPI: (supports S0 S3 S4 S5)
- [ 0.129136] ACPI: Using IOAPIC for interrupt routing
- [ 0.129153] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.135187] ACPI: Power Resource [FN00] (off)
- [ 0.135241] ACPI: Power Resource [FN01] (off)
- [ 0.135293] ACPI: Power Resource [FN02] (off)
- [ 0.135345] ACPI: Power Resource [FN03] (off)
- [ 0.135397] ACPI: Power Resource [FN04] (off)
- [ 0.135931] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 0.135935] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.136099] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
- [ 0.136190] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
- [ 0.136191] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- [ 0.136455] PCI host bridge to bus 0000:00
- [ 0.136457] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.136458] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.136460] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.136461] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
- [ 0.136462] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
- [ 0.136463] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
- [ 0.136464] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
- [ 0.136465] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
- [ 0.136466] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
- [ 0.136467] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
- [ 0.136468] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 0.136474] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
- [ 0.136538] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
- [ 0.136564] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.136623] pci 0000:00:01.0: System wakeup disabled by ACPI
- [ 0.136653] pci 0000:00:02.0: [8086:0412] type 00 class 0x038000
- [ 0.136663] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
- [ 0.136668] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.136671] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
- [ 0.136726] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
- [ 0.136735] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
- [ 0.136811] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
- [ 0.136833] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
- [ 0.136878] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.136905] pci 0000:00:14.0: System wakeup disabled by ACPI
- [ 0.136932] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- [ 0.136955] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
- [ 0.137003] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.137061] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
- [ 0.137086] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
- [ 0.137150] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.137187] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.137216] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
- [ 0.137239] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
- [ 0.137290] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.137319] pci 0000:00:1b.0: System wakeup disabled by ACPI
- [ 0.137347] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
- [ 0.137402] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.137453] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.137481] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
- [ 0.137536] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.137585] pci 0000:00:1c.2: System wakeup disabled by ACPI
- [ 0.137619] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- [ 0.137644] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
- [ 0.137708] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.137745] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.137774] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
- [ 0.137910] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
- [ 0.137929] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
- [ 0.137935] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
- [ 0.137941] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
- [ 0.137948] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
- [ 0.137954] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
- [ 0.137961] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
- [ 0.137984] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.138032] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
- [ 0.138049] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
- [ 0.138066] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
- [ 0.138157] pci 0000:01:00.0: [1002:67b1] type 00 class 0x030000
- [ 0.138180] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.138189] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
- [ 0.138195] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
- [ 0.138202] pci 0000:01:00.0: reg 0x24: [mem 0xf7d00000-0xf7d3ffff]
- [ 0.138208] pci 0000:01:00.0: reg 0x30: [mem 0xf7d40000-0xf7d5ffff pref]
- [ 0.138242] pci 0000:01:00.0: supports D1 D2
- [ 0.138243] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
- [ 0.138265] pci 0000:01:00.0: System wakeup disabled by ACPI
- [ 0.138294] pci 0000:01:00.1: [1002:aac8] type 00 class 0x040300
- [ 0.138316] pci 0000:01:00.1: reg 0x10: [mem 0xf7d60000-0xf7d63fff 64bit]
- [ 0.138367] pci 0000:01:00.1: supports D1 D2
- [ 0.150054] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.150056] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.150058] pci 0000:00:01.0: bridge window [mem 0xf7d00000-0xf7dfffff]
- [ 0.150060] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
- [ 0.150112] acpiphp: Slot [1] registered
- [ 0.150116] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.150179] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.150217] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
- [ 0.150244] pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
- [ 0.150261] pci 0000:03:00.0: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit pref]
- [ 0.150329] pci 0000:03:00.0: supports D1 D2
- [ 0.150330] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.150366] pci 0000:03:00.0: System wakeup disabled by ACPI
- [ 0.162060] pci 0000:00:1c.2: PCI bridge to [bus 03]
- [ 0.162063] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.162066] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
- [ 0.162071] pci 0000:00:1c.2: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
- [ 0.162578] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.162613] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.162646] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.162679] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
- [ 0.162711] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.162744] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.162777] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
- [ 0.162808] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.163047] ACPI: Enabled 6 GPEs in block 00 to 3F
- [ 0.163131] vgaarb: setting as boot device: PCI:0000:01:00.0
- [ 0.163133] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.163134] vgaarb: loaded
- [ 0.163134] vgaarb: bridge control possible 0000:01:00.0
- [ 0.163302] SCSI subsystem initialized
- [ 0.163323] libata version 3.00 loaded.
- [ 0.163338] ACPI: bus type USB registered
- [ 0.163349] usbcore: registered new interface driver usbfs
- [ 0.163355] usbcore: registered new interface driver hub
- [ 0.163364] usbcore: registered new device driver usb
- [ 0.163451] PCI: Using ACPI for IRQ routing
- [ 0.164689] PCI: pci_cache_line_size set to 64 bytes
- [ 0.164724] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 0.164725] e820: reserve RAM buffer [mem 0xb5d7f000-0xb7ffffff]
- [ 0.164726] e820: reserve RAM buffer [mem 0xb61cb000-0xb7ffffff]
- [ 0.164726] e820: reserve RAM buffer [mem 0xc8db0000-0xcbffffff]
- [ 0.164727] e820: reserve RAM buffer [mem 0xc8e98000-0xcbffffff]
- [ 0.164728] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
- [ 0.164729] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
- [ 0.164812] NetLabel: Initializing
- [ 0.164813] NetLabel: domain hash size = 128
- [ 0.164814] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.164822] NetLabel: unlabeled traffic allowed by default
- [ 0.164865] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.164869] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.166880] amd_nb: Cannot enumerate AMD northbridges
- [ 0.166889] clocksource: Switched to clocksource hpet
- [ 0.171070] AppArmor: AppArmor Filesystem Enabled
- [ 0.171112] pnp: PnP ACPI init
- [ 0.171171] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
- [ 0.171174] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.171296] system 00:01: [io 0x0680-0x069f] has been reserved
- [ 0.171298] system 00:01: [io 0xffff] has been reserved
- [ 0.171299] system 00:01: [io 0xffff] has been reserved
- [ 0.171300] system 00:01: [io 0xffff] has been reserved
- [ 0.171301] system 00:01: [io 0x1c00-0x1cfe] has been reserved
- [ 0.171302] system 00:01: [io 0x1d00-0x1dfe] has been reserved
- [ 0.171304] system 00:01: [io 0x1e00-0x1efe] has been reserved
- [ 0.171305] system 00:01: [io 0x1f00-0x1ffe] has been reserved
- [ 0.171306] system 00:01: [io 0x1800-0x18fe] could not be reserved
- [ 0.171307] system 00:01: [io 0x164e-0x164f] has been reserved
- [ 0.171309] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.171325] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.171357] system 00:03: [io 0x1854-0x1857] has been reserved
- [ 0.171359] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.171428] system 00:04: [io 0x0a00-0x0a0f] has been reserved
- [ 0.171429] system 00:04: [io 0x0a10-0x0a1f] has been reserved
- [ 0.171431] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.171532] pnp 00:05: [dma 0 disabled]
- [ 0.171563] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.171597] system 00:06: [io 0x04d0-0x04d1] has been reserved
- [ 0.171598] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.171878] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.171880] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.171881] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.171882] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.171884] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.171885] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.171886] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
- [ 0.171887] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.171889] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.171890] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.171891] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
- [ 0.171892] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
- [ 0.171894] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.172044] pnp: PnP ACPI: found 8 devices
- [ 0.177843] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.177857] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
- [ 0.177859] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
- [ 0.177861] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
- [ 0.177869] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
- [ 0.177871] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
- [ 0.177872] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
- [ 0.177873] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
- [ 0.177875] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
- [ 0.177876] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
- [ 0.177880] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
- [ 0.177885] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
- [ 0.177887] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
- [ 0.177888] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.177890] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.177892] pci 0000:00:01.0: bridge window [mem 0xf7d00000-0xf7dfffff]
- [ 0.177894] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
- [ 0.177897] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.177899] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.177903] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
- [ 0.177906] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
- [ 0.177911] pci 0000:00:1c.2: PCI bridge to [bus 03]
- [ 0.177913] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.177917] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
- [ 0.177919] pci 0000:00:1c.2: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
- [ 0.177925] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.177926] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 0.177927] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.177928] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
- [ 0.177929] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
- [ 0.177931] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
- [ 0.177932] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
- [ 0.177933] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
- [ 0.177934] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
- [ 0.177935] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
- [ 0.177936] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 0.177937] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
- [ 0.177938] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
- [ 0.177939] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
- [ 0.177940] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff]
- [ 0.177941] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
- [ 0.177943] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
- [ 0.177944] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
- [ 0.177945] pci_bus 0000:03: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
- [ 0.177966] NET: Registered protocol family 2
- [ 0.178073] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.178158] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.178265] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.178282] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.178302] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.178341] NET: Registered protocol family 1
- [ 0.178667] pci 0000:01:00.0: Video device with shadowed ROM
- [ 0.178673] PCI: CLS 64 bytes, default 64
- [ 0.178704] Trying to unpack rootfs image as initramfs...
- [ 0.634058] Freeing initrd memory: 39816K (ffff88003322c000 - ffff88003590e000)
- [ 0.634084] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.634086] software IO TLB [mem 0xc4db0000-0xc8db0000] (64MB) mapped at [ffff8800c4db0000-ffff8800c8daffff]
- [ 0.634132] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
- [ 0.634133] hw unit of domain pp0-core 2^-14 Joules
- [ 0.634134] hw unit of domain package 2^-14 Joules
- [ 0.634135] hw unit of domain dram 2^-14 Joules
- [ 0.634135] hw unit of domain pp1-gpu 2^-14 Joules
- [ 0.634254] Scanning for low memory corruption every 60 seconds
- [ 0.634474] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.634493] audit: initializing netlink subsys (disabled)
- [ 0.634503] audit: type=2000 audit(1486019167.624:1): initialized
- [ 0.634839] Initialise system trusted keyring
- [ 0.634927] HugeTLB registered 1 GB page size, pre-allocated 0 pages
- [ 0.634928] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.635882] zbud: loaded
- [ 0.636042] VFS: Disk quotas dquot_6.6.0
- [ 0.636067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.636241] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.636406] fuse init (API version 7.23)
- [ 0.636497] Key type big_key registered
- [ 0.636515] Allocating IMA MOK and blacklist keyrings.
- [ 0.636820] Key type asymmetric registered
- [ 0.636823] Asymmetric key parser 'x509' registered
- [ 0.636848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 0.636870] io scheduler noop registered
- [ 0.636872] io scheduler deadline registered (default)
- [ 0.636892] io scheduler cfq registered
- [ 0.637229] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.637235] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.637255] vesafb: mode is 1024x768x32, linelength=4096, pages=0
- [ 0.637256] vesafb: scrolling: redraw
- [ 0.637257] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
- [ 0.637266] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
- [ 0.637322] Console: switching to colour frame buffer device 128x48
- [ 0.637330] fb0: VESA VGA frame buffer device
- [ 0.637341] intel_idle: MWAIT substates: 0x42120
- [ 0.637342] intel_idle: v0.4.1 model 0x3C
- [ 0.637342] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.637504] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.637507] ACPI: Power Button [PWRB]
- [ 0.637532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.637534] ACPI: Power Button [PWRF]
- [ 0.638033] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.638035] ACPI: Thermal Zone [TZ00] (28 C)
- [ 0.638177] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.638178] ACPI: Thermal Zone [TZ01] (30 C)
- [ 0.638225] GHES: HEST is not enabled!
- [ 0.638302] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.658670] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 0.659721] Linux agpgart interface v0.103
- [ 0.661454] brd: module loaded
- [ 0.662264] loop: module loaded
- [ 0.662407] libphy: Fixed MDIO Bus: probed
- [ 0.662410] tun: Universal TUN/TAP device driver, 1.6
- [ 0.662411] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.662438] PPP generic driver version 2.4.2
- [ 0.662480] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.662483] ehci-pci: EHCI PCI platform driver
- [ 0.662557] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 0.662562] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.662571] ehci-pci 0000:00:1a.0: debug port 2
- [ 0.666455] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 0.666467] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
- [ 0.674860] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.674886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.674887] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.674888] usb usb1: Product: EHCI Host Controller
- [ 0.674889] usb usb1: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
- [ 0.674890] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.675042] hub 1-0:1.0: USB hub found
- [ 0.675047] hub 1-0:1.0: 2 ports detected
- [ 0.675197] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 0.675201] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.675210] ehci-pci 0000:00:1d.0: debug port 2
- [ 0.679117] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 0.679127] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
- [ 0.690903] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.690928] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.690929] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.690930] usb usb2: Product: EHCI Host Controller
- [ 0.690931] usb usb2: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
- [ 0.690932] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.691080] hub 2-0:1.0: USB hub found
- [ 0.691084] hub 2-0:1.0: 2 ports detected
- [ 0.691173] ehci-platform: EHCI generic platform driver
- [ 0.691181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.691186] ohci-pci: OHCI PCI platform driver
- [ 0.691194] ohci-platform: OHCI generic platform driver
- [ 0.691200] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.691275] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.691278] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
- [ 0.692340] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
- [ 0.692344] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 0.692404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.692405] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.692406] usb usb3: Product: xHCI Host Controller
- [ 0.692407] usb usb3: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
- [ 0.692408] usb usb3: SerialNumber: 0000:00:14.0
- [ 0.692559] hub 3-0:1.0: USB hub found
- [ 0.692569] hub 3-0:1.0: 10 ports detected
- [ 0.694284] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.694288] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
- [ 0.694307] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- [ 0.694308] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.694309] usb usb4: Product: xHCI Host Controller
- [ 0.694310] usb usb4: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
- [ 0.694311] usb usb4: SerialNumber: 0000:00:14.0
- [ 0.694459] hub 4-0:1.0: USB hub found
- [ 0.694465] hub 4-0:1.0: 2 ports detected
- [ 0.694792] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.697136] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.697141] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.697373] mousedev: PS/2 mouse device common for all mice
- [ 0.697595] rtc_cmos 00:02: RTC can wake from S4
- [ 0.697717] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 0.697742] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 0.697747] i2c /dev entries driver
- [ 0.697778] device-mapper: uevent: version 1.0.3
- [ 0.697848] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
- [ 0.697859] Intel P-state driver initializing.
- [ 0.697995] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.698807] NET: Registered protocol family 10
- [ 0.699228] NET: Registered protocol family 17
- [ 0.699270] Key type dns_resolver registered
- [ 0.699775] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
- [ 0.699789] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
- [ 0.699830] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e
- [ 0.699873] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e
- [ 0.699987] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.700373] registered taskstats version 1
- [ 0.700427] Loading compiled-in X.509 certificates
- [ 0.702704] Loaded X.509 cert 'Build time autogenerated kernel key: 6ffa6bfaa152a74cd2b6aa1e188cb999d8f5632b'
- [ 0.702746] zswap: loaded using pool lzo/zbud
- [ 0.704254] Key type trusted registered
- [ 0.707167] Key type encrypted registered
- [ 0.707180] AppArmor: AppArmor sha1 policy hashing enabled
- [ 0.707183] ima: No TPM chip found, activating TPM-bypass!
- [ 0.707196] evm: HMAC attrs: 0x1
- [ 0.707654] Magic number: 5:927:115
- [ 0.707760] rtc_cmos 00:02: setting system clock to 2017-02-02 07:06:08 UTC (1486019168)
- [ 0.707921] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.707923] EDD information not available.
- [ 0.707977] PM: Hibernation image not present or could not be loaded.
- [ 0.708805] Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
- [ 0.708806] Write protecting the kernel read-only data: 14336k
- [ 0.709261] Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
- [ 0.709537] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
- [ 0.716887] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.716932] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.716941] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.717264] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.717293] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.717447] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.717481] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.717512] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.717540] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.717572] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
- [ 0.734026] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
- [ 0.735246] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 0.735520] acpi device:60: registered as cooling_device9
- [ 0.735567] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
- [ 0.736103] wmi: Mapper loaded
- [ 0.746292] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.746299] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 0.746648] [drm] Initialized drm 1.1.0 20060810
- [ 0.747448] ahci 0000:00:1f.2: version 3.0
- [ 0.747590] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
- [ 0.747592] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
- [ 0.751752] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000fba000, 44:8a:5b:2f:55:69, XID 0c000800 IRQ 29
- [ 0.751754] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 0.753304] amdkcl: module verification failed: signature and/or required key missing - tainting kernel
- [ 0.753421] Could not create tracefs 'fence_wait_end' directory
- [ 0.753424] Could not create tracefs 'fence_wait_start' directory
- [ 0.753426] Could not create tracefs 'fence_signaled' directory
- [ 0.753427] Could not create tracefs 'fence_enable_signal' directory
- [ 0.753429] Could not create tracefs 'fence_destroy' directory
- [ 0.753431] Could not create tracefs 'fence_init' directory
- [ 0.753433] Could not create tracefs 'fence_emit' directory
- [ 0.753434] Could not create tracefs 'fence_annotate_wait_on' directory
- [ 0.770553] r8169 0000:03:00.0 enp3s0: renamed from eth0
- [ 0.771340] scsi host0: ahci
- [ 0.771421] scsi host1: ahci
- [ 0.771488] scsi host2: ahci
- [ 0.771551] scsi host3: ahci
- [ 0.771611] scsi host4: ahci
- [ 0.771669] scsi host5: ahci
- [ 0.771698] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 28
- [ 0.771701] ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a180 irq 28
- [ 0.771702] ata3: DUMMY
- [ 0.771702] ata4: DUMMY
- [ 0.771704] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 28
- [ 0.771706] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a380 irq 28
- [ 0.772084] [drm] Memory usable by graphics device = 2048M
- [ 0.772086] checking generic (e0000000 300000) vs hw (d0000000 10000000)
- [ 0.772087] [drm] Replacing VGA console driver
- [ 0.778241] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 0.778243] [drm] Driver supports precise vblank timestamp query.
- [ 0.823682] [drm] amdgpu kernel modesetting enabled.
- [ 0.825177] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- [ 0.825179] AMD IOMMUv2 functionality not available on this system
- [ 0.827467] CRAT table not found
- [ 0.827468] Finished initializing topology ret=0
- [ 0.827495] kfd kfd: Initialized module
- [ 0.827597] checking generic (e0000000 300000) vs hw (e0000000 10000000)
- [ 0.827599] fb: switching to amdgpudrmfb from VESA VGA
- [ 0.827618] Console: switching to colour dummy device 80x25
- [ 0.860470] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
- [ 0.860772] [drm] initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x1458:0x22BD 0x80).
- [ 0.860779] [drm] register mmio base: 0xF7D00000
- [ 0.860780] [drm] register mmio size: 262144
- [ 0.860783] [drm] doorbell mmio base: 0xF0000000
- [ 0.860784] [drm] doorbell mmio size: 8388608
- [ 0.860788] [drm] probing gen 2 caps for device 8086:c01 = 261ad02/6
- [ 0.860790] [drm] probing mlw for device 8086:c01 = 261ad02
- [ 0.860807] amdgpu 0000:01:00.0: Invalid ROM contents
- [ 0.860849] ATOM BIOS: GV
- [ 0.860856] [drm] GPU post is not needed
- [ 0.860896] amdgpu 0000:01:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001FFFFFFFF (8192M used)
- [ 0.860897] amdgpu 0000:01:00.0: GTT: 8192M 0x0000000200000000 - 0x00000003FFFFFFFF
- [ 0.860898] [drm] Detected VRAM RAM=8192M, BAR=256M
- [ 0.860899] [drm] RAM width 512bits GDDR5
- [ 0.861004] [TTM] Zone kernel: Available graphics memory: 4025336 kiB
- [ 0.861005] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [ 0.861006] [TTM] Initializing pool allocator
- [ 0.861009] [TTM] Initializing DMA pool allocator
- [ 0.861022] [drm] amdgpu: 8192M of VRAM memory ready
- [ 0.861022] [drm] amdgpu: 8192M of GTT memory ready.
- [ 0.861030] [drm] GART: num cpu pages 2097152, num gpu pages 2097152
- [ 0.861270] i915 0000:00:02.0: No connectors reported connected with modes
- [ 0.861273] [drm] Cannot find any crtc or sizes - going 1024x768
- [ 0.861617] Console: switching to colour frame buffer device 128x48
- [ 0.861627] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 0.990883] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 1.006862] usb 3-3: new high-speed USB device number 2 using xhci_hcd
- [ 1.006889] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 1.021389] [drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
- [ 1.021424] amdgpu 0000:01:00.0: amdgpu: using MSI.
- [ 1.021441] [drm] amdgpu: irq initialized.
- [ 1.021480] [drm] Internal thermal controller with fan control
- [ 1.027193] [drm] Invalid PCC GPIO: 13!
- [ 1.027194] [drm] amdgpu: dpm initialized
- [ 1.027322] amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000200000010, cpu addr 0xffff8802208f6010
- [ 1.027459] amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000200000020, cpu addr 0xffff8802208f6020
- [ 1.027565] amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000200000030, cpu addr 0xffff8802208f6030
- [ 1.027702] amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000200000040, cpu addr 0xffff8802208f6040
- [ 1.027791] amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000200000050, cpu addr 0xffff8802208f6050
- [ 1.028389] amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000200000060, cpu addr 0xffff8802208f6060
- [ 1.028553] amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000200000070, cpu addr 0xffff8802208f6070
- [ 1.028653] amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000200000080, cpu addr 0xffff8802208f6080
- [ 1.028743] amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000200000090, cpu addr 0xffff8802208f6090
- [ 1.028818] amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000002000000a0, cpu addr 0xffff8802208f60a0
- [ 1.028867] amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000002000000b0, cpu addr 0xffff8802208f60b0
- [ 1.028939] [drm] Found UVD firmware Version: 1.64 Family ID: 9
- [ 1.029214] amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000108bd30, cpu addr 0xffffc90001238d30
- [ 1.029256] [drm] Found VCE firmware Version: 50.10 Binary ID: 2
- [ 1.029348] amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000002000000d0, cpu addr 0xffff8802208f60d0
- [ 1.029481] amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000002000000e0, cpu addr 0xffff8802208f60e0
- [ 1.029553] [drm] PCIE gen 2 link speeds already enabled
- [ 1.036923] [drm] DAL is enabled
- [ 1.037064] [drm] DC: create_links: connectors_num: physical:5, virtual:0
- [ 1.037069] [drm] Connector[0] description:signal 32
- [ 1.037071] [drm] Using channel: CHANNEL_ID_DDC1 [1]
- [ 1.037080] [drm] Connector[1] description:signal 32
- [ 1.037082] [drm] Using channel: CHANNEL_ID_DDC5 [5]
- [ 1.037090] [drm] Connector[2] description:signal 32
- [ 1.037091] [drm] Using channel: CHANNEL_ID_DDC6 [6]
- [ 1.037099] [drm] Connector[3] description:signal 4
- [ 1.037100] [drm] Using channel: CHANNEL_ID_DDC3 [3]
- [ 1.037108] [drm] Connector[4] description:signal 2
- [ 1.037110] [drm] Using channel: CHANNEL_ID_DDC4 [4]
- [ 1.058869] [drm] Display Core initialized
- [ 1.058872] [drm] amdgpu: freesync_module init done ffff8802205cc000.
- [ 1.059250] [drm] link=0, dc_sink_in= (null) is now Disconnected
- [ 1.059252] [drm] DCHPD: connector_id=0: dc_sink didn't change.
- [ 1.059594] [drm] link=1, dc_sink_in= (null) is now Disconnected
- [ 1.059596] [drm] DCHPD: connector_id=1: dc_sink didn't change.
- [ 1.059782] [drm] link=2, dc_sink_in= (null) is now Disconnected
- [ 1.059783] [drm] DCHPD: connector_id=2: dc_sink didn't change.
- [ 1.075302] [drm] SADs count is: -2, don't need to read it
- [ 1.075614] [drm] [Detect] [DVI][ConnIdx:3] G918w1: [Block 0] 00 FF FF FF FF FF FF 00 16 09 44 19 BC 05 00 00 1C 11 01 03 81 29 1A 78 2A 9B B6 A4 53 4B 9D 24 14 4F 54 BF EF 80 81 80 71 4F 81 40 95 0F 01 01 01 01 01 01 95 00 9A 29 A0 D0 51 84 22 30 50 98 36 00 9A 01 11 00 00 1C 00 00 00 FF 00 39 36 33 37 37 43 41 30 30 31 34 36 38 00 00 00 FD 00 32 4C 1E 53 0E 00 0A 20 20 20 20 20 20 00 00 00 FC 00 47 39 31 38 77 31 0A 20 20 20 20 20 20 00 17 ^
- [ 1.075617] [drm] dc_link_detect: manufacturer_id = 916, product_id = 1944, serial_number = 5BC, manufacture_week = 28, manufacture_year = 17, display_name = G918w1, speaker_flag = 0, audio_mode_count = 0
- [ 1.075618] [drm] link=3, dc_sink_in=ffff880220746000 is now Connected
- [ 1.075619] [drm] DCHPD: connector_id=3: Old sink= (null) New sink=ffff880220746000
- [ 1.086872] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.087422] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
- [ 1.087426] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802270d98c0), AE_NOT_FOUND (20150930/psparse-542)
- [ 1.090876] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.090895] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.090924] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.091480] ata1.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
- [ 1.091483] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.092119] ata1.00: configured for UDMA/133
- [ 1.092383] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
- [ 1.092551] ata2.00: supports DRM functions and may not be fully accessible
- [ 1.092614] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 1.092619] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 1.092636] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.092657] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.092659] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.092676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.092692] ata2.00: READ LOG DMA EXT failed, trying unqueued
- [ 1.092732] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1.092733] ata2.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
- [ 1.092734] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 1.092791] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
- [ 1.092795] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8802270d9938), AE_NOT_FOUND (20150930/psparse-542)
- [ 1.092801] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN00, max UDMA/133
- [ 1.093118] ata2.00: supports DRM functions and may not be fully accessible
- [ 1.093186] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
- [ 1.093279] ata2.00: configured for UDMA/133
- [ 1.093368] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
- [ 1.093479] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 1.093495] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 1.093515] sd 1:0:0:0: [sdb] Write Protect is off
- [ 1.093517] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.093538] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.093960] sdb: sdb1 sdb2 sdb3 < sdb5 >
- [ 1.094218] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 1.094436] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
- [ 1.094440] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8802270d9938), AE_NOT_FOUND (20150930/psparse-542)
- [ 1.094447] ata6.00: configured for UDMA/133
- [ 1.106762] [drm] SADs count is: -524, don't need to read it
- [ 1.106779] [drm] [Detect] [DDVI][ConnIdx:4] BenQ XL2720Z: [Block 0] 00 FF FF FF FF FF FF 00 09 D1 29 7F 45 54 00 00 0C 1A 01 03 80 3C 22 78 2E 14 D1 A5 58 52 A2 26 0C 50 54 A5 6B 80 D1 C0 45 7C 61 7C 81 80 81 BC 95 3C 31 7C 01 01 02 3A 80 18 71 38 2D 40 58 2C 45 00 55 50 21 00 00 1E 00 00 00 FF 00 44 33 47 30 30 35 31 30 53 4C 30 0A 20 00 00 00 FD 00 38 90 1E A0 21 00 0A 20 20 20 20 20 20 00 00 00 FC 00 42 65 6E 51 20 58 4C 32 37 32 30 5A 0A 01 0D ^
- [ 1.106788] [drm] [Detect] [DDVI][ConnIdx:4] BenQ XL2720Z: [Block 1] 02 01 04 00 FE 5B 80 A0 70 38 35 40 30 20 35 00 55 50 21 00 00 1A 86 6F 80 A0 70 38 40 40 30 20 35 00 55 50 21 00 00 1A FC 7E 80 88 70 38 12 40 18 20 35 00 55 50 21 00 00 1E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8F ^
- [ 1.106790] [drm] dc_link_detect: manufacturer_id = D109, product_id = 7F29, serial_number = 5445, manufacture_week = 12, manufacture_year = 26, display_name = BenQ XL2720Z, speaker_flag = 0, audio_mode_count = 0
- [ 1.106791] [drm] link=4, dc_sink_in=ffff880220747800 is now Connected
- [ 1.106791] [drm] DCHPD: connector_id=4: Old sink= (null) New sink=ffff880220747800
- [ 1.106796] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.106797] [drm] Driver supports precise vblank timestamp query.
- [ 1.106797] [drm] KMS initialized.
- [ 1.109040] [drm] ring test on 0 succeeded in 16 usecs
- [ 1.109113] [drm] ring test on 1 succeeded in 3 usecs
- [ 1.109137] [drm] ring test on 2 succeeded in 8 usecs
- [ 1.109163] [drm] ring test on 3 succeeded in 9 usecs
- [ 1.109187] [drm] ring test on 4 succeeded in 8 usecs
- [ 1.109213] [drm] ring test on 5 succeeded in 7 usecs
- [ 1.109237] [drm] ring test on 6 succeeded in 7 usecs
- [ 1.109262] [drm] ring test on 7 succeeded in 9 usecs
- [ 1.109288] [drm] ring test on 8 succeeded in 9 usecs
- [ 1.109431] [drm] ring test on 9 succeeded in 5 usecs
- [ 1.109436] [drm] ring test on 10 succeeded in 4 usecs
- [ 1.113054] ata5.00: ATA-7: WDC WD3200AAJS-40RYA0, 12.01B03, max UDMA/133
- [ 1.113056] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.113661] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
- [ 1.113664] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802270d98c0), AE_NOT_FOUND (20150930/psparse-542)
- [ 1.113835] ata5.00: configured for UDMA/133
- [ 1.113987] scsi 4:0:0:0: Direct-Access ATA WDC WD3200AAJS-4 1B03 PQ: 0 ANSI: 5
- [ 1.114188] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.114190] sd 4:0:0:0: Attached scsi generic sg2 type 0
- [ 1.114215] sd 4:0:0:0: [sdc] Write Protect is off
- [ 1.114217] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 1.114278] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.116200] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN00 PQ: 0 ANSI: 5
- [ 1.127231] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
- [ 1.127233] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.127510] hub 1-1:1.0: USB hub found
- [ 1.127596] hub 1-1:1.0: 4 ports detected
- [ 1.131722] sda: sda1 sda2 sda3
- [ 1.132132] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.136209] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.136211] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.136364] sr 5:0:0:0: Attached scsi CD-ROM sr0
- [ 1.136413] sr 5:0:0:0: Attached scsi generic sg3 type 5
- [ 1.152076] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610
- [ 1.152078] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 1.152079] usb 3-3: Product: USB2.0 Hub
- [ 1.152623] hub 3-3:1.0: USB hub found
- [ 1.152893] hub 3-3:1.0: 3 ports detected
- [ 1.155227] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
- [ 1.155229] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.155358] hub 2-1:1.0: USB hub found
- [ 1.155469] hub 2-1:1.0: 6 ports detected
- [ 1.155898] [drm] ring test on 11 succeeded in 2 usecs
- [ 1.155900] [drm] UVD initialized successfully.
- [ 1.160219] sdc: sdc1
- [ 1.160502] sd 4:0:0:0: [sdc] Attached SCSI disk
- [ 1.262871] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
- [ 1.279320] usb 4-1: New USB device found, idVendor=0480, idProduct=a007
- [ 1.279322] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
- [ 1.279323] usb 4-1: Product: External USB 3.0
- [ 1.279324] usb 4-1: Manufacturer: Toshiba
- [ 1.279325] usb 4-1: SerialNumber: 20121020008028F
- [ 1.281848] usb-storage 4-1:1.0: USB Mass Storage device detected
- [ 1.281997] scsi host6: usb-storage 4-1:1.0
- [ 1.282040] usbcore: registered new interface driver usb-storage
- [ 1.282957] usbcore: registered new interface driver uas
- [ 1.381876] [drm] ring test on 12 succeeded in 8 usecs
- [ 1.381882] [drm] ring test on 13 succeeded in 2 usecs
- [ 1.381882] [drm] VCE initialized successfully.
- [ 1.383532] [drm] fb mappable at 0xE1227000
- [ 1.383533] [drm] vram apper at 0xE0000000
- [ 1.383533] [drm] size 8294400
- [ 1.383534] [drm] fb depth is 24
- [ 1.383534] [drm] pitch is 7680
- [ 1.383650] fbcon: amdgpudrmfb (fb1) is primary device
- [ 1.383651] fbcon: Remapping primary device, fb1, to tty 1-63
- [ 1.383674] [drm] Atomic commit: SET crtc id 0: [ffff880220701000]
- [ 1.383675] [drm] dc_commit_targets: 1 targets
- [ 1.383676] [drm] core_target 0x2598fea0: stream_count=1
- [ 1.383677] [drm] core_stream 0x21182c00: src: 0, 0, 1440, 900; dst: 0, 0, 1440, 900;
- [ 1.383677] [drm] pix_clk_khz: 106500, h_total: 1904, v_total: 934
- [ 1.383678] [drm] sink name: G918w1, serial: 1468
- [ 1.383678] [drm] link: 3
- [ 1.390843] usb 3-4: new high-speed USB device number 3 using xhci_hcd
- [ 1.420221] [drm] dce_get_required_clocks_state: clocks unsupported
- [ 1.420222] [drm] [Mode] [DVI][ConnIdx:3] {1440x900, 1904x934@106500Khz}^
- [ 1.420238] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 1.420289] [drm] Atomic commit: SET crtc id 1: [ffff880220702000]
- [ 1.420290] [drm] dc_commit_targets: 2 targets
- [ 1.420291] [drm] core_target 0x2598fea0: stream_count=1
- [ 1.420291] [drm] core_stream 0x21182c00: src: 0, 0, 1440, 900; dst: 0, 0, 1440, 900;
- [ 1.420292] [drm] pix_clk_khz: 106500, h_total: 1904, v_total: 934
- [ 1.420293] [drm] sink name: G918w1, serial: 1468
- [ 1.420293] [drm] link: 3
- [ 1.420293] [drm] core_target 0x2063fca0: stream_count=1
- [ 1.420294] [drm] core_stream 0x207a5800: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
- [ 1.420295] [drm] pix_clk_khz: 148500, h_total: 2200, v_total: 1125
- [ 1.420295] [drm] sink name: BenQ XL2720Z, serial: 21573
- [ 1.420295] [drm] link: 4
- [ 1.428213] [drm] dce_get_required_clocks_state: clocks unsupported
- [ 1.428213] [drm] [Mode] [DVI][ConnIdx:3] {1440x900, 1904x934@106500Khz}^
- [ 1.428214] [drm] [Mode] [DDVI][ConnIdx:4] {1920x1080, 2200x1125@148500Khz}^
- [ 1.428227] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 1.428895] amdgpu 0000:01:00.0: fb1: amdgpudrmfb frame buffer device
- [ 1.429014] [drm] ib test on ring 0 succeeded
- [ 1.429050] [drm] ib test on ring 1 succeeded
- [ 1.429087] [drm] ib test on ring 2 succeeded
- [ 1.429124] [drm] ib test on ring 3 succeeded
- [ 1.429161] [drm] ib test on ring 4 succeeded
- [ 1.429198] [drm] ib test on ring 5 succeeded
- [ 1.429220] [drm] ib test on ring 6 succeeded
- [ 1.429239] [drm] ib test on ring 7 succeeded
- [ 1.429259] [drm] ib test on ring 8 succeeded
- [ 1.429277] [drm] ib test on ring 9 succeeded
- [ 1.429294] [drm] ib test on ring 10 succeeded
- [ 1.429645] [drm] ib test on ring 11 succeeded
- [ 1.429931] [drm] ib test on ring 12 succeeded
- [ 1.430914] [drm] Initialized amdgpu 3.9.0 20150101 for 0000:01:00.0 on minor 1
- [ 1.523031] usb 3-4: New USB device found, idVendor=1a40, idProduct=0101
- [ 1.523033] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 1.523035] usb 3-4: Product: USB 2.0 Hub
- [ 1.523424] hub 3-4:1.0: USB hub found
- [ 1.523442] hub 3-4:1.0: 4 ports detected
- [ 1.630817] tsc: Refined TSC clocksource calibration: 2999.997 MHz
- [ 1.630819] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e4269d76, max_idle_ns: 440795235636 ns
- [ 1.690812] usb 3-8: new high-speed USB device number 4 using xhci_hcd
- [ 1.821739] usb 3-8: New USB device found, idVendor=04a9, idProduct=1751
- [ 1.821741] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.821742] usb 3-8: Product: MG2100 series
- [ 1.821743] usb 3-8: Manufacturer: Canon
- [ 1.821744] usb 3-8: SerialNumber: 349390
- [ 1.890813] usb 3-4.3: new high-speed USB device number 5 using xhci_hcd
- [ 2.001831] usb 3-4.3: New USB device found, idVendor=058f, idProduct=6387
- [ 2.001833] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.001834] usb 3-4.3: Product: Mass Storage
- [ 2.001835] usb 3-4.3: Manufacturer: Generic
- [ 2.001836] usb 3-4.3: SerialNumber: F486BFA4
- [ 2.002400] usb-storage 3-4.3:1.0: USB Mass Storage device detected
- [ 2.002521] scsi host7: usb-storage 3-4.3:1.0
- [ 2.162783] usb 3-9: new full-speed USB device number 6 using xhci_hcd
- [ 2.279183] scsi 6:0:0:0: Direct-Access Toshiba External USB 3.0 0 PQ: 0 ANSI: 6
- [ 2.279439] sd 6:0:0:0: Attached scsi generic sg4 type 0
- [ 2.282639] sd 6:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 2.282850] sd 6:0:0:0: [sdd] Write Protect is off
- [ 2.282853] sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
- [ 2.283056] sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.292600] usb 3-9: New USB device found, idVendor=1532, idProduct=011a
- [ 2.292602] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.292603] usb 3-9: Product: Razer BlackWidow Ultimate 2013
- [ 2.292604] usb 3-9: Manufacturer: Razer
- [ 2.295732] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.299456] usbcore: registered new interface driver usbhid
- [ 2.299458] usbhid: USB HID core driver
- [ 2.300724] input: Razer Razer BlackWidow Ultimate 2013 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:1532:011A.0001/input/input6
- [ 2.354974] hid-generic 0003:1532:011A.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2013] on usb-0000:00:14.0-9/input0
- [ 2.355689] input: Razer Razer BlackWidow Ultimate 2013 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:1532:011A.0002/input/input7
- [ 2.392302] sdd: sdd1
- [ 2.393467] sd 6:0:0:0: [sdd] Attached SCSI disk
- [ 2.410874] hid-generic 0003:1532:011A.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2013] on usb-0000:00:14.0-9/input1
- [ 2.412082] input: Razer Razer BlackWidow Ultimate 2013 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.2/0003:1532:011A.0003/input/input8
- [ 2.412292] hid-generic 0003:1532:011A.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate 2013] on usb-0000:00:14.0-9/input2
- [ 2.458765] usb 3-10: new full-speed USB device number 7 using xhci_hcd
- [ 2.588828] usb 3-10: New USB device found, idVendor=046d, idProduct=c531
- [ 2.588830] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.588831] usb 3-10: Product: USB Receiver
- [ 2.588832] usb 3-10: Manufacturer: Logitech
- [ 2.590815] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:046D:C531.0004/input/input9
- [ 2.591096] hid-generic 0003:046D:C531.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10/input0
- [ 2.593558] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:046D:C531.0005/input/input10
- [ 2.630955] clocksource: Switched to clocksource tsc
- [ 2.647017] hid-generic 0003:046D:C531.0005: input,hiddev0,hidraw4: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10/input1
- [ 2.688402] random: nonblocking pool is initialized
- [ 3.000531] scsi 7:0:0:0: Direct-Access USB2.0 Flash Disk 8.07 PQ: 0 ANSI: 4
- [ 3.000989] sd 7:0:0:0: Attached scsi generic sg5 type 0
- [ 3.001677] sd 7:0:0:0: [sde] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
- [ 3.002351] sd 7:0:0:0: [sde] Write Protect is off
- [ 3.002354] sd 7:0:0:0: [sde] Mode Sense: 23 00 00 00
- [ 3.003152] sd 7:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.020219] sde: sde1
- [ 3.022531] sd 7:0:0:0: [sde] Attached SCSI removable disk
- [ 6.775172] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.835693] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
- [ 6.835780] systemd[1]: Detected architecture x86-64.
- [ 6.835893] systemd[1]: Set hostname to <JustinGaming-PC-Ubuntu>.
- [ 6.892984] systemd[1]: Listening on udev Kernel Socket.
- [ 6.893029] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 6.893052] systemd[1]: Listening on Journal Socket.
- [ 6.893073] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 6.893079] systemd[1]: Reached target Remote File Systems (Pre).
- [ 6.893132] systemd[1]: Created slice User and Session Slice.
- [ 6.893145] systemd[1]: Listening on Syslog Socket.
- [ 6.893181] systemd[1]: Created slice System Slice.
- [ 6.906471] systemd[1]: Mounting Huge Pages File System...
- [ 6.906481] systemd[1]: Reached target Slices.
- [ 6.906819] systemd[1]: Starting Uncomplicated firewall...
- [ 6.907569] systemd[1]: Starting Load Kernel Modules...
- [ 6.907883] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 6.907934] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 6.907983] systemd[1]: Listening on Journal Audit Socket.
- [ 6.908236] systemd[1]: Starting Set console keymap...
- [ 6.908275] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 6.908549] systemd[1]: Starting Journal Service...
- [ 6.908831] systemd[1]: Mounting Debug File System...
- [ 6.908958] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 6.911372] systemd[1]: Listening on udev Control Socket.
- [ 6.911386] systemd[1]: Reached target User and Group Name Lookups.
- [ 6.911667] systemd[1]: Started Braille Device Support.
- [ 6.912176] systemd[1]: Reached target Remote File Systems.
- [ 6.912189] systemd[1]: Reached target Encrypted Volumes.
- [ 6.912445] systemd[1]: Started Read required files in advance.
- [ 6.912781] systemd[1]: Mounting POSIX Message Queue File System...
- [ 6.913924] systemd[1]: Mounted Debug File System.
- [ 6.913954] systemd[1]: Mounted Huge Pages File System.
- [ 6.914266] systemd[1]: Mounted POSIX Message Queue File System.
- [ 6.914423] systemd[1]: Started Uncomplicated firewall.
- [ 6.914533] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 6.918833] lp: driver loaded but no devices found
- [ 6.923077] ppdev: user-space parallel port driver
- [ 6.926126] systemd[1]: Started Load Kernel Modules.
- [ 6.932595] systemd[1]: Starting Apply Kernel Variables...
- [ 6.932964] systemd[1]: Mounting FUSE Control File System...
- [ 6.933431] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 6.934906] systemd[1]: Mounted FUSE Control File System.
- [ 6.940172] systemd[1]: Started Apply Kernel Variables.
- [ 6.941424] systemd[1]: Started Journal Service.
- [ 7.057295] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
- [ 7.084115] systemd-journald[299]: Received request to flush runtime journal from PID 1
- [ 7.154306] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 7.156108] audit: type=1400 audit(1486019174.943:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=520 comm="apparmor_parser"
- [ 7.162160] audit: type=1400 audit(1486019174.947:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=517 comm="apparmor_parser"
- [ 7.162166] audit: type=1400 audit(1486019174.947:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=517 comm="apparmor_parser"
- [ 7.162168] audit: type=1400 audit(1486019174.947:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=517 comm="apparmor_parser"
- [ 7.162171] audit: type=1400 audit(1486019174.947:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=517 comm="apparmor_parser"
- [ 7.162316] audit: type=1400 audit(1486019174.947:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=516 comm="apparmor_parser"
- [ 7.162320] audit: type=1400 audit(1486019174.947:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=516 comm="apparmor_parser"
- [ 7.164632] audit: type=1400 audit(1486019174.951:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=535 comm="apparmor_parser"
- [ 7.164641] audit: type=1400 audit(1486019174.951:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=535 comm="apparmor_parser"
- [ 7.169394] audit: type=1400 audit(1486019174.955:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=539 comm="apparmor_parser"
- [ 7.196333] usblp 3-8:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1751
- [ 7.196350] usbcore: registered new interface driver usblp
- [ 7.217865] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
- [ 7.218079] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
- [ 7.218081] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
- [ 7.235103] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11
- [ 7.235142] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12
- [ 7.235175] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input13
- [ 7.235209] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
- [ 7.235241] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
- [ 7.235281] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
- [ 7.236881] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
- [ 7.236883] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 7.236885] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 7.236886] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
- [ 7.236887] snd_hda_codec_realtek hdaudioC1D0: inputs:
- [ 7.236889] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
- [ 7.236890] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
- [ 7.236892] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
- [ 7.247693] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
- [ 7.247752] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
- [ 7.247801] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
- [ 7.248469] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
- [ 7.248509] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
- [ 7.248555] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
- [ 7.248590] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
- [ 7.248626] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
- [ 7.418183] AVX2 version of gcm_enc/dec engaged.
- [ 7.418185] AES CTR mode by8 optimization enabled
- [ 7.447012] intel_rapl: Found RAPL domain package
- [ 7.447016] intel_rapl: Found RAPL domain core
- [ 7.447018] intel_rapl: Found RAPL domain uncore
- [ 7.447020] intel_rapl: Found RAPL domain dram
- [ 7.469761] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 7.471314] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 97.278032] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
- [ 97.288442] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 97.288490] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 97.318345] r8169 0000:03:00.0 enp3s0: link down
- [ 97.318347] r8169 0000:03:00.0 enp3s0: link down
- [ 97.318467] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
- [ 97.755088] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 97.772030] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 97.772077] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 97.788869] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 97.789079] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 97.805941] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 97.805973] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 97.822749] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 98.442014] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 98.453968] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 98.466442] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 98.479315] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 100.077420] r8169 0000:03:00.0 enp3s0: link up
- [ 100.077428] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
- [ 102.201652] usblp1: removed
- [ 102.206322] usblp 3-8:1.1: usblp1: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1751
- [ 111.322848] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 111.342023] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 111.346942] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2063fca0
- [ 111.359359] [drm] Atomic commit: SET crtc id 1: [ffff880220702000]
- [ 111.359375] [drm] dc_commit_targets: 2 targets
- [ 111.359377] [drm] core_target 0x2598fea0: stream_count=1
- [ 111.359378] [drm] core_stream 0x21182c00: src: 0, 0, 1440, 900; dst: 0, 0, 1440, 900;
- [ 111.359379] [drm] pix_clk_khz: 106500, h_total: 1904, v_total: 934
- [ 111.359380] [drm] sink name: G918w1, serial: 1468
- [ 111.359381] [drm] link: 3
- [ 111.359382] [drm] core_target 0xc49835c0: stream_count=1
- [ 111.359383] [drm] core_stream 0xc055800: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
- [ 111.359384] [drm] pix_clk_khz: 325080, h_total: 2056, v_total: 1098
- [ 111.359385] [drm] sink name: BenQ XL2720Z, serial: 21573
- [ 111.359385] [drm] link: 4
- [ 111.408677] [drm] dce_get_required_clocks_state: clocks unsupported
- [ 111.425036] [drm] [Mode] [DVI][ConnIdx:3] {1440x900, 1904x934@106500Khz}^
- [ 111.425040] [drm] [Mode] [DDVI][ConnIdx:4] {1920x1080, 2056x1098@325080Khz}^
- [ 111.425066] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xc49835c0
- [ 111.599885] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 111.612669] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xc49835c0
- [ 111.624879] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xc49835c0
- [ 111.637078] [drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x2598fea0
- [ 367.291276] usb 3-3: USB disconnect, device number 2
- [ 367.571707] usb 3-3: new high-speed USB device number 8 using xhci_hcd
- [ 367.701038] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610
- [ 367.701040] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 367.701042] usb 3-3: Product: USB2.0 Hub
- [ 367.701757] hub 3-3:1.0: USB hub found
- [ 367.702098] hub 3-3:1.0: 3 ports detected
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement