Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.0-RELEASE #2: Sat Jan 21 11:47:04 JST 2012
- root@bsdchan.sunplaza.net:/usr/obj/usr/src/sys/PATCHED i386
- CPU: Intel(R) Atom(TM) CPU N455 @ 1.66GHz (1662.63-MHz 686-class CPU)
- Origin = "GenuineIntel" Id = 0x106ca Family = 6 Model = 1c Stepping = 10
- Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x40e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
- AMD Features=0x20100000<NX,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant, performance statistics
- real memory = 1073741824 (1024 MB)
- avail memory = 1021005824 (973 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <ACRSYS ACRPRDCT>
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP/HT): APIC ID: 1
- ioapic0: Changing APIC ID to 4
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- Cuse4BSD v0.1.21 @ /dev/cuse
- kbd1 at kbdmux0
- acpi0: <ACRSYS ACRPRDCT> on motherboard
- acpi0: Power Button (fixed)
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- acpi_button0: <Power Button> on acpi0
- acpi_button1: <Sleep Button> on acpi0
- acpi_lid0: <Control Method Lid Switch> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- vgapci0: <VGA-compatible display> port 0x60c0-0x60c7 mem 0x58180000-0x581fffff,0x40000000-0x4fffffff,0x58000000-0x580fffff irq 16 at device 2.0 on pci0
- agp0: <Intel Pineview (M) SVGA controller> on vgapci0
- agp0: aperture size is 256M, detected 8188k stolen memory
- vgapci1: <VGA-compatible display> mem 0x58100000-0x5817ffff at device 2.1 on pci0
- hdac0: <Intel 82801G High Definition Audio Controller> mem 0x58200000-0x58203fff irq 19 at device 27.0 on pci0
- pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- alc0: <Atheros AR8152 v1.1 PCIe Fast Ethernet> port 0x5000-0x507f mem 0x57000000-0x5703ffff irq 16 at device 0.0 on pci1
- alc0: 3584 Tx FIFO, 3840 Rx FIFO
- alc0: Using 1 MSI message(s).
- miibus0: <MII bus> on alc0
- atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
- atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
- alc0: Ethernet address: 1c:75:08:c6:5a:02
- pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
- pci2: <ACPI PCI bus> on pcib2
- pci2: <network> at device 0.0 (no driver attached)
- uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x6080-0x609f irq 18 at device 29.0 on pci0
- uhci0: LegSup = 0x2f00
- usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
- uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x6060-0x607f irq 20 at device 29.1 on pci0
- uhci1: LegSup = 0x2f00
- usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
- uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x6040-0x605f irq 21 at device 29.2 on pci0
- uhci2: LegSup = 0x2f00
- usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
- uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x6020-0x603f irq 22 at device 29.3 on pci0
- uhci3: LegSup = 0x2f00
- usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
- ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x58204400-0x582047ff irq 22 at device 29.7 on pci0
- usbus4: EHCI version 1.0
- usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
- pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci5: <ACPI PCI bus> on pcib3
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci0: <Intel ICH7 AHCI SATA controller> port 0x60b8-0x60bf,0x60cc-0x60cf,0x60b0-0x60b7,0x60c8-0x60cb,0x60a0-0x60af mem 0x58204000-0x582043ff irq 17 at device 31.2 on pci0
- ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x6000-0x601f irq 17 at device 31.3 on pci0
- smbus0: <System Management Bus> on ichsmb0
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- acpi_tz0: <Thermal Zone> on acpi0
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- battery0: <ACPI Control Method Battery> on acpi0
- acpi_acad0: <AC Adapter> on acpi0
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
- atrtc0: Warning: Couldn't map I/O.
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 450
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- Entered isa_probe()
- Recognised as i386
- @ PnP ID check exited with ENXIO
- pmtimer0 on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
- ata1 at port 0x170-0x177,0x376 irq 15 on isa0
- Entered isa_probe()
- Recognised as i386
- port0==NULL, exited with ENXIO
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement