API tools faq
paste
Advertisement
Guest User

Mele A1000 boot log

a guest
Jun 23rd, 2012
260
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.09 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Linux version 3.0.31+ (jaufranc@Precise-VBOX) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 PREEMPT Thu Jun 21 20:16:20 ICT 2012
  3. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine: sun4i
  6. [ 0.000000] Total Detected Memory: 512MB with 1 banks
  7. [ 0.000000] Ignoring unrecognised tag 0x00000000
  8. [ 0.000000] Memory Reserved(in bytes):
  9. [ 0.000000] SYS: 0x43000000, 0x00010000
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  11. [ 0.000000] On node 0 totalpages: 114688
  12. [ 0.000000] free_area_init_node: node 0, pgdat c06f4b2c, node_mem_map c08ae000
  13. [ 0.000000] Normal zone: 896 pages used for memmap
  14. [ 0.000000] Normal zone: 0 pages reserved
  15. [ 0.000000] Normal zone: 113792 pages, LIFO batch:31
  16. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  17. [ 0.000000] pcpu-alloc: [0] 0
  18. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  19. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 loglevel=8 panic=10 rootwait --no-log
  20. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  21. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  23. [ 0.000000] Memory: 448MB = 448MB total
  24. [ 0.000000] Memory: 445772k/445772k available, 12980k reserved, 0K highmem
  25. [ 0.000000] Virtual kernel memory layout:
  26. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  27. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  28. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  29. [ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
  30. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  31. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  32. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  33. [ 0.000000] .init : 0xc0008000 - 0xc002f000 ( 156 kB)
  34. [ 0.000000] .text : 0xc002f000 - 0xc06c2000 (6732 kB)
  35. [ 0.000000] .data : 0xc06c2000 - 0xc06fc5a0 ( 234 kB)
  36. [ 0.000000] .bss : 0xc06fc5c4 - 0xc08ad678 (1733 kB)
  37. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  38. [ 0.000000] NR_IRQS:96 nr_irqs:96 96
  39. [ 0.000000] timer0: Periodic Mode
  40. [ 0.000000] Console: colour dummy device 80x30
  41. [ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
  42. [ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  43. [ 0.050000] pid_max: default: 32768 minimum: 301
  44. [ 0.050000] Mount-cache hash table entries: 512
  45. [ 0.060000] Initializing cgroup subsys cpuacct
  46. [ 0.060000] Initializing cgroup subsys devices
  47. [ 0.060000] Initializing cgroup subsys freezer
  48. [ 0.070000] Initializing cgroup subsys blkio
  49. [ 0.070000] CPU: Testing write buffer coherency: ok
  50. [ 0.070000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  51. [ 0.080000] devtmpfs: initialized
  52. [ 0.080000] print_constraints: dummy:
  53. [ 0.090000] NET: Registered protocol family 16
  54. [ 0.090000] hw-breakpoint: debug architecture 0x4 unsupported.
  55. [ 0.100000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  56. [ 0.100000] Initialize DMAC OK
  57. [ 0.110000] bio: create slab <bio-0> at 0
  58. [ 0.110000] SCSI subsystem initialized
  59. [ 0.110000] libata version 3.00 loaded.
  60. [ 0.120000] usbcore: registered new interface driver usbfs
  61. [ 0.120000] usbcore: registered new interface driver hub
  62. [ 0.130000] usbcore: registered new device driver usb
  63. [ 0.130000] Bluetooth: Core ver 2.16
  64. [ 0.130000] NET: Registered protocol family 31
  65. [ 0.140000] Bluetooth: HCI device and connection manager initialized
  66. [ 0.140000] Bluetooth: HCI socket layer initialized
  67. [ 0.140000] Bluetooth: L2CAP socket layer initialized
  68. [ 0.150000] Bluetooth: SCO socket layer initialized
  69. [ 0.150000] Init eGon pin module V2.0
  70. [ 0.160000] cfg80211: Calling CRDA to update world regulatory domain
  71. [ 0.160000] Switching to clocksource aw 64bits couter
  72. [ 0.170000] FS-Cache: Loaded
  73. [ 0.170000] CacheFiles: Loaded
  74. [ 0.180000] Switched to NOHz mode on CPU #0
  75. [ 0.180000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  76. [ 0.180000] [sw_hcd0]: usb host driver initialize........
  77. [ 0.190000] [sw_udc]: udc_init: version 20080411
  78. [ 0.190000] [sw_udc]: usb_vbase = 0xf1c13000
  79. [ 0.190000] [sw_udc]: sram_vbase = 0xf1c00000
  80. [ 0.200000] [sw_udc]: open_usb_clock
  81. [ 0.220000] udc->driver is null, udc is need not stop
  82. [ 0.220000] NET: Registered protocol family 2
  83. [ 0.230000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  84. [ 0.230000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  85. [ 0.240000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  86. [ 0.240000] TCP: Hash tables configured (established 16384 bind 16384)
  87. [ 0.250000] TCP reno registered
  88. [ 0.250000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  89. [ 0.260000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  90. [ 0.260000] NET: Registered protocol family 1
  91. [ 0.270000] RPC: Registered named UNIX socket transport module.
  92. [ 0.270000] RPC: Registered udp transport module.
  93. [ 0.270000] RPC: Registered tcp transport module.
  94. [ 0.280000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  95. [ 0.280000] [pm]aw_pm_init!
  96. [ 0.290000] audit: initializing netlink socket (disabled)
  97. [ 0.290000] type=2000 audit(0.289:1): initialized
  98. [ 0.310000] VFS: Disk quotas dquot_6.5.2
  99. [ 0.310000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  100. [ 0.320000] NTFS driver 2.1.30 [Flags: R/W].
  101. [ 0.330000] fuse init (API version 7.16)
  102. [ 0.330000] msgmni has been set to 870
  103. [ 0.340000] alg: No test for stdrng (krng)
  104. [ 0.340000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  105. [ 0.350000] io scheduler noop registered
  106. [ 0.350000] io scheduler deadline registered
  107. [ 0.350000] io scheduler cfq registered (default)
  108. [ 0.360000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  109. [ 0.380000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  110. [ 0.950000] console [ttyS0] enabled
  111. [ 0.960000] [uart]: used uart info.: 0x05
  112. [ 0.990000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  113. [ 1.000000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
  114. [ 1.030000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  115. [ 1.050000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
  116. [ 1.060000] G2D: drv_g2d_init
  117. [ 1.060000] G2D: Module initialized.major:252
  118. [ 1.070000] brd: module loaded
  119. [ 1.080000] loop: module loaded
  120. [ 1.090000] [NAND]nand driver, init.
  121. [ 1.090000] cmu_clk is 360
  122. [ 1.100000] nand clk init end
  123. [ 1.100000] offset 0xc: 0x6141
  124. [ 1.110000] offset 0x14: 0x82000008
  125. [ 1.110000] [NAND] nand gpio_request
  126. [ 1.120000] [NAND] nand driver version: 0x2 0x9
  127. [ 1.130000] nand interrupte register ok
  128. [ 1.130000] ret of NFC_ChangMode is 0
  129. [ 1.140000] dma_hdle is 0
  130. [ 1.140000] dma_hdle is 10000008
  131. [ 1.150000] cmu_clk is 360
  132. [ 1.150000] nand clk init end
  133. [ 1.160000] offset 0xc: 0x6141
  134. [ 1.160000] offset 0x14: 0x82000005
  135. [ 1.190000] The 0 disk name = BOOTFS, class name = DISK, disk size = 32768
  136. [ 1.200000] The 1 disk name = LROOTFS, class name = DISK, disk size = 65536
  137. [ 1.210000] The 2 disk name = LSYSTEMFS, class name = DISK, disk size = 524288
  138. [ 1.220000] The 3 disk name = LDATAFS, class name = DISK, disk size = 3145728
  139. [ 1.240000] The 4 disk name = MISC, class name = DISK, disk size = 2048
  140. [ 1.250000] The 5 disk name = LRECOVERYFS, class name = DISK, disk size = 65536
  141. [ 1.260000] The 6 disk name = LCACHEFS, class name = DISK, disk size = 262144
  142. [ 1.280000] The 7 disk name = env, class name = DISK, disk size = 4096
  143. [ 1.290000] The 8 disk name = UDISK, class name = DISK, disk size = 0
  144. [ 1.300000] The 8 disk size = 3678208
  145. [ 1.300000] part total count = 9
  146. [ 1.310000] nanda:
  147. [ 1.320000] nandb: unknown partition table
  148. [ 1.320000] nandc: unknown partition table
  149. [ 1.330000] nandd: unknown partition table
  150. [ 1.340000] nande: unknown partition table
  151. [ 1.350000] nandf: unknown partition table
  152. [ 1.360000] nandg: unknown partition table
  153. [ 1.370000] nandh: unknown partition table
  154. [ 1.380000] nandi:
  155. [ 1.380000] benn: nand probe enter
  156. [ 1.390000] [NAND]nand driver, ok.
  157. [ 1.390000] wemac Ethernet Driver, V1.00 in file:drivers/net/sun4i/sun4i_wemac.c
  158. [ 1.410000] [EMAC] ahb clk enable
  159. [ 1.410000] [EMAC] ahb gate clk: 0x26141
  160. [ 1.430000] wemac wemac.0: PHY SETUP, reg 0 value: 0
  161. [ 1.440000] wemac wemac.0: resetting device
  162. [ 1.450000] release temp resource
  163. [ 1.450000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  164. [ 1.460000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  165. [ 1.480000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc07a5e8c
  166. [ 1.490000] [sw-ehci1]: open clock
  167. [ 1.510000] [sw-ehci1]: Set USB Power ON
  168. [ 1.520000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  169. [ 1.540000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  170. [ 1.550000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  171. [ 1.580000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  172. [ 1.580000] ehci_irq: port change detect
  173. [ 1.590000] hub 1-0:1.0: USB hub found
  174. [ 1.600000] hub 1-0:1.0: 1 port detected
  175. [ 1.610000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc07a5f9c
  176. [ 1.620000] [sw-ohci1]: open clock
  177. [ 1.650000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  178. [ 1.660000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  179. [ 1.670000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  180. [ 1.740000] hub 2-0:1.0: USB hub found
  181. [ 1.750000] hub 2-0:1.0: 1 port detected
  182. [ 1.750000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc07a60ac
  183. [ 1.770000] [sw-ehci2]: open clock
  184. [ 1.790000] [sw-ehci2]: Set USB Power ON
  185. [ 1.800000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  186. [ 1.810000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  187. [ 1.830000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  188. [ 1.930000] usb 1-1: new high speed USB device number 2 using sw-ehci
  189. [ 1.960000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  190. [ 1.960000] ehci_irq: port change detect
  191. [ 1.970000] hub 3-0:1.0: USB hub found
  192. [ 1.980000] hub 3-0:1.0: 1 port detected
  193. [ 1.990000] [sw-ehci2]: sw_usb_disable_ehci
  194. [ 1.990000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc07a60ac
  195. [ 2.010000] sw-ehci sw-ehci.2: remove, state 1
  196. [ 2.010000] usb usb3: USB disconnect, device number 1
  197. [ 2.030000] sw-ehci sw-ehci.2: USB bus 3 deregistered
  198. [ 2.030000] [sw-ehci2]: Set USB Power OFF
  199. [ 2.040000] [sw-ehci2]: close clock
  200. [ 2.050000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc07a61bc
  201. [ 2.060000] [sw-ohci2]: open clock
  202. [ 2.090000] [sw-ohci2]: Set USB Power ON
  203. [ 2.090000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  204. [ 2.110000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 3
  205. [ 2.120000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  206. [ 2.130000] hub 1-1:1.0: USB hub found
  207. [ 2.140000] hub 1-1:1.0: 4 ports detected
  208. [ 2.190000] hub 3-0:1.0: USB hub found
  209. [ 2.200000] hub 3-0:1.0: 1 port detected
  210. [ 2.200000] [sw-ohci2]: sw_usb_disable_ohci
  211. [ 2.210000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc07a61bc
  212. [ 2.220000] sw-ohci sw-ohci.2: remove, state 1
  213. [ 2.230000] usb usb3: USB disconnect, device number 1
  214. [ 2.240000] sw-ohci sw-ohci.2: USB bus 3 deregistered
  215. [ 2.250000] [sw-ohci2]: Set USB Power OFF
  216. [ 2.260000] [sw-ohci2]: close clock
  217. [ 2.260000] Initializing USB Mass Storage driver...
  218. [ 2.270000] usbcore: registered new interface driver usb-storage
  219. [ 2.280000] USB Mass Storage support registered.
  220. [ 2.290000] usbcore: registered new interface driver ums-alauda
  221. [ 2.300000] usbcore: registered new interface driver ums-cypress
  222. [ 2.310000] usbcore: registered new interface driver ums-datafab
  223. [ 2.320000] usbcore: registered new interface driver ums_eneub6250
  224. [ 2.340000] usbcore: registered new interface driver ums-freecom
  225. [ 2.350000] usbcore: registered new interface driver ums-isd200
  226. [ 2.360000] usbcore: registered new interface driver ums-jumpshot
  227. [ 2.370000] usbcore: registered new interface driver ums-karma
  228. [ 2.380000] usbcore: registered new interface driver ums-onetouch
  229. [ 2.390000] usbcore: registered new interface driver ums-realtek
  230. [ 2.400000] usbcore: registered new interface driver ums-sddr09
  231. [ 2.410000] usbcore: registered new interface driver ums-sddr55
  232. [ 2.420000] usbcore: registered new interface driver ums-usbat
  233. [ 2.430000] mousedev: PS/2 mouse device common for all mice
  234. [ 2.450000] sunxi RTC version 0.1
  235. [ 2.450000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
  236. [ 2.460000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  237. [ 2.470000] sunxi-rtc sunxi-rtc: read time 2012-6-22 23:8:22
  238. [ 2.480000] using rtc device, rtc, for alarms
  239. [ 2.490000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  240. [ 2.500000] i2c /dev entries driver
  241. [ 2.510000] !!! base_Addr = 0xdc8d2c00
  242. [ 2.510000] config i2c gpio with gpio_config api
  243. [ 2.520000] twi0, apb clock = 24000000
  244. [ 2.530000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  245. [ 2.540000] I2C: i2c-0: AW16XX I2C adapter
  246. [ 2.550000] **********start************
  247. [ 2.550000] 0x40
  248. [ 2.560000] 0xf8
  249. [ 2.560000] 0x28
  250. [ 2.560000] 0x0
  251. [ 2.560000] 0x0
  252. [ 2.570000] **********end************
  253. [ 2.570000] !!! base_Addr = 0xdc8d4000
  254. [ 2.580000] twi1, apb clock = 24000000
  255. [ 2.580000] I2C: i2c-1: AW16XX I2C adapter
  256. [ 2.590000] **********start************
  257. [ 2.600000] 0x40
  258. [ 2.600000] 0xf8
  259. [ 2.600000] 0x58
  260. [ 2.610000] 0x0
  261. [ 2.610000] 0x0
  262. [ 2.610000] **********end************
  263. [ 2.620000] !!! base_Addr = 0xdc8d6400
  264. [ 2.620000] twi2, apb clock = 24000000
  265. [ 2.630000] I2C: i2c-2: AW16XX I2C adapter
  266. [ 2.640000] **********start************
  267. [ 2.640000] 0x40
  268. [ 2.650000] 0xf8
  269. [ 2.650000] 0x58
  270. [ 2.650000] 0x0
  271. [ 2.650000] 0x0
  272. [ 2.660000] **********end************
  273. [ 2.660000] print_constraints: axp20_ldo1: 1300 mV
  274. [ 2.670000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  275. [ 2.680000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  276. [ 2.700000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  277. [ 2.710000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  278. [ 2.720000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  279. [ 2.740000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  280. [ 2.750000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  281. [ 2.770000] [AXP]axp driver uning configuration failed(1579)
  282. [ 2.780000] [AXP]pmu_suspendpwroff_vol = 3500
  283. [ 2.800000] Bluetooth: HCI UART driver ver 2.2
  284. [ 2.810000] Bluetooth: HCI H4 protocol initialized
  285. [ 2.820000] Bluetooth: HCI BCSP protocol initialized
  286. [ 2.830000] Bluetooth: HCILL protocol initialized
  287. [ 2.830000] cpuidle: using governor ladder
  288. [ 2.840000] cpuidle: using governor menu
  289. [ 2.850000] [mmc_pm]: no sdio card used in configuration
  290. [ 2.860000] [mmc]: sunximmc_init
  291. [ 2.860000] [mmc]: sunxi mmc controller using config : 0xb
  292. [ 2.870000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  293. [ 2.880000] [mmc]: mmc 0 power off !!
  294. [ 2.890000] [mmc]: mmc0 Probe: base:0xdc8d8000 irq:32 dma:0 pdes:0xdba6c000, ret 0.
  295. [ 2.900000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
  296. [ 2.920000] [mmc]: mmc 1 power off !!
  297. [ 2.920000] [mmc]: mmc1 Probe: base:0xdc8da000 irq:33 dma:0 pdes:0xdba70000, ret 0.
  298. [ 2.940000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  299. [ 2.950000] [mmc]: mmc 3 power off !!
  300. [ 2.950000] [mmc]: mmc3 Probe: base:0xdc8dc000 irq:35 dma:0 pdes:0xdba74000, ret 0.
  301. [ 2.970000] usbcore: registered new interface driver usbhid
  302. [ 2.980000] usbhid: USB HID core driver
  303. [ 2.990000] logger: created 256K log 'log_main'
  304. [ 2.990000] logger: created 256K log 'log_events'
  305. [ 3.000000] logger: created 256K log 'log_radio'
  306. [ 3.010000] logger: created 256K log 'log_system'
  307. [ 3.020000] IPv4 over IPv4 tunneling driver
  308. [ 3.030000] TCP cubic registered
  309. [ 3.030000] Initializing XFRM netlink socket
  310. [ 3.040000] NET: Registered protocol family 17
  311. [ 3.050000] NET: Registered protocol family 15
  312. [ 3.060000] Bluetooth: RFCOMM TTY layer initialized
  313. [ 3.060000] Bluetooth: RFCOMM socket layer initialized
  314. [ 3.070000] Bluetooth: RFCOMM ver 1.11
  315. [ 3.080000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  316. [ 3.090000] Bluetooth: BNEP filters: protocol multicast
  317. [ 3.100000] 802.1Q VLAN Support v1.8
  318. [ 3.110000] [mmc_pm]: No sdio card, please check your config !!
  319. [ 3.120000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  320. [ 3.130000] Registering SWP/SWPB emulation handler
  321. [ 3.140000] registered taskstats version 1
  322. [ 3.150000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  323. [ 3.160000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  324. [ 3.180000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  325. [ 3.190000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  326. [ 3.210000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  327. [ 3.220000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
  328. [ 3.240000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  329. [ 3.240000] sunxi-rtc sunxi-rtc: read time 2012-6-22 23:8:22
  330. [ 3.250000] sunxi-rtc sunxi-rtc: setting system clock to 2012-06-22 23:08:22 UTC (1340406502)
  331. [ 3.270000] Waiting for root device /dev/mmcblk0p2...
  332. [ 3.890000] [mmc]: mmc 0 detect change, present 1
  333. [ 4.190000] [mmc]: mmc 0 power on !!
  334. [ 4.230000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  335. [ 4.240000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  336. [ 4.250000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  337. [ 4.270000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  338. [ 4.280000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  339. [ 4.290000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  340. [ 4.340000] mmc0: new high speed SDHC card at address 0001
  341. [ 4.350000] mmcblk0: mmc0:0001 00000 3.73 GiB
  342. [ 4.360000] mmcblk0: p1 p2
  343. [ 4.380000] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  344. [ 4.400000] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  345. [ 4.430000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  346. [ 4.450000] VFS: Mounted root (ext4 filesystem) on device 179:2.
  347. [ 4.460000] devtmpfs: mounted
  348. [ 4.470000] Freeing init memory: 156K
  349. [ 4.860000] init: ureadahead main process (49) terminated with status 5
  350. [ 7.240000] [mmc_pm]: No sdio card, please check your config !!
  351. [ 7.730000] udevd[146]: starting version 175
  352. [ 10.500000] wemac wemac.0: enabling eth0
  353. [ 10.520000] wemac wemac.0: WARNING: no IRQ resource flags set.
  354. [ 10.520000] wemac wemac.0: resetting device
  355. [ 10.550000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
  356. [ 15.560000] init: Failed to spawn atd main process: unable to execute: No such file or directory
  357. [ 16.080000] init: tty1 main process (421) killed by TERM signal
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!