Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Green
- Device Model: WDC WD30EZRX-00DC0B0
- Serial Number: WD-WMC1T0133700
- LU WWN Device Id: 5 0014ee 058b5a67d
- Firmware Version: 80.00A80
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Tue Jun 23 21:55:05 2015 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Unknown
- === START OF READ SMART DATA SECTION ===
- SMART Status not supported: Incomplete response, ATA output registers missing
- SMART overall-health self-assessment test result: PASSED
- Warning: This result is based on an Attribute check.
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: (39360) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 395) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x70b5) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 176 175 021 - 6183
- 4 Start_Stop_Count -O--CK 100 100 000 - 39
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 089 089 000 - 8061
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 39
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 19
- 193 Load_Cycle_Count -O--CK 200 200 000 - 237
- 194 Temperature_Celsius -O---K 125 118 000 - 25
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 1
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 90% 8058 2409268032
- # 2 Short offline Completed: read failure 10% 8052 2409268032
- # 3 Short offline Completed: read failure 10% 8046 2409268032
- # 4 Short offline Completed without error 00% 8040 -
- # 5 Short offline Completed: read failure 10% 8034 2409268032
- # 6 Short offline Completed: read failure 10% 8028 2409268032
- # 7 Short offline Completed: read failure 10% 8022 2409268032
- # 8 Short offline Completed: read failure 10% 8016 2409268032
- # 9 Short offline Completed: read failure 10% 8010 2409268032
- #10 Short offline Completed: read failure 10% 8004 2409268032
- #11 Extended offline Completed: read failure 60% 8003 2409268032
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 25 Celsius
- Power Cycle Min/Max Temperature: 22/27 Celsius
- Lifetime Min/Max Temperature: 15/32 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (448)
- Index Estimated Time Temperature Celsius
- 449 2015-06-23 13:58 25 ******
- ... ..( 42 skipped). .. ******
- 14 2015-06-23 14:41 25 ******
- 15 2015-06-23 14:42 26 *******
- ... ..(248 skipped). .. *******
- 264 2015-06-23 18:51 26 *******
- 265 2015-06-23 18:52 25 ******
- ... ..( 6 skipped). .. ******
- 272 2015-06-23 18:59 25 ******
- 273 2015-06-23 19:00 26 *******
- 274 2015-06-23 19:01 25 ******
- ... ..( 81 skipped). .. ******
- 356 2015-06-23 20:23 25 ******
- 357 2015-06-23 20:24 26 *******
- 358 2015-06-23 20:25 25 ******
- ... ..( 5 skipped). .. ******
- 364 2015-06-23 20:31 25 ******
- 365 2015-06-23 20:32 26 *******
- ... ..( 6 skipped). .. *******
- 372 2015-06-23 20:39 26 *******
- 373 2015-06-23 20:40 25 ******
- 374 2015-06-23 20:41 26 *******
- 375 2015-06-23 20:42 25 ******
- ... ..( 3 skipped). .. ******
- 379 2015-06-23 20:46 25 ******
- 380 2015-06-23 20:47 26 *******
- 381 2015-06-23 20:48 25 ******
- ... ..( 15 skipped). .. ******
- 397 2015-06-23 21:04 25 ******
- 398 2015-06-23 21:05 26 *******
- ... ..( 2 skipped). .. *******
- 401 2015-06-23 21:08 26 *******
- 402 2015-06-23 21:09 25 ******
- ... ..( 16 skipped). .. ******
- 419 2015-06-23 21:26 25 ******
- 420 2015-06-23 21:27 26 *******
- 421 2015-06-23 21:28 25 ******
- ... ..( 3 skipped). .. ******
- 425 2015-06-23 21:32 25 ******
- 426 2015-06-23 21:33 26 *******
- 427 2015-06-23 21:34 25 ******
- 428 2015-06-23 21:35 26 *******
- 429 2015-06-23 21:36 26 *******
- 430 2015-06-23 21:37 26 *******
- 431 2015-06-23 21:38 25 ******
- ... ..( 16 skipped). .. ******
- 448 2015-06-23 21:55 25 ******
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 228620 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement