Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- den@wnc:~$ adb logcat
- - waiting for device -
- --------- beginning of /dev/log/main
- D/PrintK ( 0): <6>Initializing cgroup subsys cpu
- I/PrintK ( 0): <5>Linux version 2.6.35.14-DSC-Team-Phoenix (n0p@ubuild) (gcc version 4.4.3 (GCC) ) #216 PREEMPT Tue Apr 3 17:01:23 FET 2012
- W/PrintK ( 0): CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c53c7f
- W/PrintK ( 0): CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
- W/PrintK ( 0): Machine: QCT QSD8X50 SURF
- D/PrintK ( 0): <6>Partition (from atag) boot -- Offset:1b0 Size:28
- D/PrintK ( 0): <6>Partition (from atag) recovery -- Offset:1d8 Size:30
- D/PrintK ( 0): <6>Partition (from atag) recovery_bak -- Offset:208 Size:30
- D/PrintK ( 0): <6>Partition (from atag) LogFilter -- Offset:238 Size:2
- D/PrintK ( 0): <6>Partition (from atag) oem_log -- Offset:23a Size:18
- D/PrintK ( 0): <6>Partition (from atag) splash -- Offset:25a Size:8
- D/PrintK ( 0): <6>Partition (from atag) system -- Offset:380 Size:820
- D/PrintK ( 0): <6>Partition (from atag) userdata -- Offset:ba0 Size:c60
- W/PrintK ( 0): Memory policy: ECC disabled, Data cache writeback
- V/PrintK ( 0): <7>On node 0 totalpages: 124416
- V/PrintK ( 0): <7>free_area_init_node: node 0, pgdat c0604548, node_mem_map c0885000
- V/PrintK ( 0): <7> Normal zone: 1020 pages used for memmap
- V/PrintK ( 0): <7> Normal zone: 0 pages reserved
- V/PrintK ( 0): <7> Normal zone: 123396 pages, LIFO batch:31
- D/PrintK ( 0): <6>allocating 163840 bytes at c0d00000 (20d00000 physical) for kernel ebi1 pmem arena
- D/PrintK ( 0): <6>allocating 29954048 bytes at c1025000 (21025000 physical) for sf pmem arena
- D/PrintK ( 0): <6>allocating 60817408 bytes at c2cb6000 (22cb6000 physical) for adsp pmem arena
- D/PrintK ( 0): <6>using 6758400 bytes of SMI at 2b00000 physical for fb
- D/PrintK ( 0): <6>allocating 524288 bytes at c66b6000 (266b6000 physical) for audio
- F/PrintK ( 0): <2>dhd_port=0xc6736000,bus_rxbuf=0xc673a000,bus_databuf=0xc673e000
- W/PrintK ( 0): Built 1 zonelists in Zone order, mobility grouping on. Total pages: 123396
- I/PrintK ( 0): <5>Kernel command line: androidboot.hardware=streak console=ttyMSM2,115200n8 androidboot.baseband=msm
- D/PrintK ( 0): <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
- D/PrintK ( 0): <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- D/PrintK ( 0): <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- D/PrintK ( 0): <6>Memory:
- V/PrintK ( 0): 232MB
- V/PrintK ( 0): 254MB
- V/PrintK ( 0): = 486MB total
- I/PrintK ( 0): <5>Memory: 395116k/395116k available, 102548k reserved, 0K highmem
- I/PrintK ( 0): <5>Virtual kernel memory layout:
- I/PrintK ( 0): vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- I/PrintK ( 0): fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- I/PrintK ( 0): DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- I/PrintK ( 0): vmalloc : 0xe0000000 - 0xfa000000 ( 416 MB)
- I/PrintK ( 0): lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
- I/PrintK ( 0): modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- I/PrintK ( 0): .init : 0xc0008000 - 0xc0030000 ( 160 kB)
- I/PrintK ( 0): .text : 0xc0030000 - 0xc05d5000 (5780 kB)
- I/PrintK ( 0): .data : 0xc05f4000 - 0xc0604b60 ( 67 kB)
- D/PrintK ( 0): <6>NR_IRQS:293
- D/PrintK ( 0): <6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- W/PrintK ( 0): Console: colour dummy device 80x30
- V/PrintK ( 0):
- D/PrintK ( 0): <6>Calibrating delay loop...
- V/PrintK ( 0): <c>509.54 BogoMIPS (lpj=2547712)
- D/PrintK ( 0): <6>pid_max: default: 32768 minimum: 301
- W/PrintK ( 0): Mount-cache hash table entries: 512
- D/PrintK ( 0): <6>Initializing cgroup subsys cpuacct
- D/PrintK ( 0): <6>Initializing cgroup subsys freezer
- D/PrintK ( 0): <6>CPU: Testing write buffer coherency:
- V/PrintK ( 0): ok
- D/PrintK ( 1): <6>NET: Registered protocol family 16
- W/PrintK ( 1): filter_init
- E/PrintK ( 1): <3>smem_find(137, 64): wrong size 56
- D/PrintK ( 1): <6>socinfo_init: v2, id=36, ver=2.0, raw_id=576, raw_ver=2
- D/PrintK ( 1): <6>Max ACPU freq from efuse data is 3000000 KHz
- D/PrintK ( 1): <6>ACPU running at 768000 KHz
- D/PrintK ( 1): <6>11 scaling frequencies supported.
- W/PrintK ( 1): board-qsd8x50_austinc msm_get_usb_serial: 0011954001219018
- W/PrintK ( 1): msm_hsusb_get_qctusb_driver: disable usb debugging functions
- W/PrintK ( 1): Sonia::msm_hsusb_get_qctusb_driver:qct_usbdiag_debugging=0 rpc_arg2=0
- W/PrintK ( 1): msm_hsusb_get_qctusb_driver: disable adb debugging functions(build ship) 0
- W/PrintK ( 1): msm_hsusb_get_qctusb_driver: enable adb debugging functions adb_debugging 0
- D/PrintK ( 1): <6>hw perfevents: enabled with ARMv7 Scorpion PMU driver, 5 counters available
- D/PrintK ( 1): <6>Scorpion registered PMU device
- W/PrintK ( 1): bio: create slab <bio-0> at 0
- I/PrintK ( 1): <5>SCSI subsystem initialized
- D/PrintK ( 1): <6>usbcore: registered new interface driver usbfs
- D/PrintK ( 1): <6>usbcore: registered new interface driver hub
- D/PrintK ( 1): <6>usbcore: registered new device driver usb
- D/PrintK ( 1): <6>msm_i2c_probe
- D/PrintK ( 1): <6>[I2C]5035+Log
- W/PrintK ( 1): [I2C]Get i2c log by cat /sys/devices/platform/msm_i2c.0/ctrl
- D/PrintK ( 1): <6>msm_i2c_probe: clk_ctl 35d, 100000 Hz
- D/PrintK ( 1): <6>Bluetooth: Core ver 2.15
- D/PrintK ( 1): <6>NET: Registered protocol family 31
- D/PrintK ( 1): <6>Bluetooth: HCI device and connection manager initialized
- D/PrintK ( 1): <6>Bluetooth: HCI socket layer initialized
- D/PrintK ( 1): <6>Switching to clocksource gp_timer
- I/PrintK ( 1): <5>Slow work thread pool: Starting up
- I/PrintK ( 1): <5>Slow work thread pool: Ready
- I/PrintK ( 1): <5>FS-Cache: Loaded
- D/PrintK ( 1): <6>CacheFiles: Loaded
- D/PrintK ( 1): <6>NET: Registered protocol family 2
- D/PrintK ( 1): <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- D/PrintK ( 1): <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- D/PrintK ( 1): <6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- D/PrintK ( 1): <6>TCP: Hash tables configured (established 16384 bind 16384)
- D/PrintK ( 1): <6>TCP reno registered
- D/PrintK ( 1): <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
- D/PrintK ( 1): <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- D/PrintK ( 1): <6>NET: Registered protocol family 1
- D/PrintK ( 1): <6>RPC: Registered udp transport module.
- D/PrintK ( 1): <6>RPC: Registered tcp transport module.
- D/PrintK ( 1): <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
- D/PrintK ( 1): <6>Unpacking initramfs...
- D/PrintK ( 1): <6>Freeing initrd memory: 144K
- D/PrintK ( 1): <6>PMU: registered new PMU device of type 0
- E/PrintK ( 19): <3>Notify: smsm init
- E/PrintK ( 4): <3>smd_alloc_channel() cid 41 does not exist
- E/PrintK ( 4): <3>smd_alloc_channel() cid 51 does not exist
- D/PrintK ( 1): <6>SMD Packet Port Driver Initialized.
- D/PrintK ( 1): <6>BootLog, +bt_rfkill_init
- D/PrintK ( 1): <6>bt_rfkill_probe:
- V/PrintK ( 1): <7>bluetooth_power: Turn off chip
- V/PrintK ( 1): <7>bluetooth_power: Turn off BT power Class 1.5
- V/PrintK ( 1): <7>bluetooth_power: Pull high for BT_WAKEUP
- D/PrintK ( 1): <6>BootLog, -bt_rfkill_init, ret=0
- D/PrintK ( 1): <6>BootLog, +headset_init
- D/PrintK ( 1): <6>Init headset wake lock
- D/PrintK ( 1): <6>input: Austin headset as /devices/virtual/input/input0
- D/PrintK ( 1): <6>BootLog, -headset_init, ret=0
- D/PrintK ( 1): <6>ashmem: initialized
- E/PrintK ( 26): <3>rpcrouter: Server create rejected, version = 0, program = 30000025
- D/PrintK ( 29): <6>RPC_TIME_TOD_SET_APPS_BASES:
- D/PrintK ( 29): tick = 221566
- D/PrintK ( 29): stamp = 1026516069
- E/PrintK ( 29): <3>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- D/PrintK ( 1): <6>NTFS driver 2.1.29 [Flags: R/W].
- W/PrintK ( 1): yaffs Apr 3 2012 17:01:17 Installing.
- D/PrintK ( 42): <6>alg: No test for stdrng (krng)
- D/PrintK ( 1): <6>io scheduler noop registered
- D/PrintK ( 1): <6>io scheduler deadline registered
- D/PrintK ( 1): <6>io scheduler cfq registered (default)
- D/PrintK ( 1): <6>msm_fb_probe: phy_Addr = 0x2b00000 virt = 0xe0800000
- D/PrintK ( 1): <6>primary mddi base phy_addr = 0xaa600000 virt = 0xe0018000
- D/PrintK ( 1): <6>MDP HW Base phy_Address = 0xaa200000 virt = 0xe0100000
- W/PrintK ( 1): BootLog, +auo_init
- E/PrintK ( 1): <3>Jackie: auo_init()
- E/PrintK ( 1): <3>pinfo->clk_rate=384000000
- E/PrintK ( 1): <3>init MDDI ESD DELAYED_WORK
- E/PrintK ( 1): <3>[Jackie] mdp_probe: [DMA_S] add mdp_lut_update_nonlcdc here!
- E/PrintK ( 1): <3>mddi_on()+
- E/PrintK ( 1): <3>auo_lcd_on()+
- D/PrintK ( 1): <6>vreg_enable: gp1 enabled
- E/PrintK ( 1): <3>Jackie: turn on vreg 3.0V for LCD panel
- W/PrintK ( 1): [LSEN]qsd_lsensor_read_cal_data = 0xFFFFFFFF, stage = 4
- D/PrintK ( 1): <6>[MDDI]labc stage = 4
- E/PrintK ( 1): <3>auo_lcd_on()-
- E/PrintK ( 1): <3>mddi_on()-
- W/PrintK ( 1): Console: switching
- V/PrintK ( 1): to colour frame buffer device 60x50
- D/PrintK ( 1): <6>FrameBuffer[0] 480x800 size=1536000 bytes is registered successfully!
- W/PrintK ( 1): <4>load_565rle_image: Can not open /logo.rle
- V/PrintK ( 1): <7>Registered led device: lcd-backlight
- W/PrintK ( 1): BootLog, -auo_init, ret=0
- W/PrintK ( 1): BootLog, +lcdc_adv7520_init
- W/PrintK ( 1): lcdc_adv7520_init(), HTX_720p_60
- E/PrintK ( 1): <3>[Jackie] lcdc_probe(), pdev=0xdfa1d200, mfd=0xdfa1ba50
- D/PrintK ( 1): <6>FrameBuffer[1] 1280x720 size=3686400 bytes is registered successfully!
- W/PrintK ( 1): <4>load_565rle_image: Can not open /logo.rle
- E/PrintK ( 1): <3>lcdc_hdmi_init(): i2c_add_driver...HDMI
- E/PrintK ( 1): <3>[HDMI] i2c_hdmi_probe+
- W/PrintK ( 1): increase LCDC output current.
- E/PrintK ( 1): <3>HDMI run at test mode..., but not power on
- E/PrintK ( 1): <3>set HDMI related GPIOs done. (test mode)
- E/PrintK ( 1): <3>hdmi_probe: hdmi_driver_data_p->irq=103, hdmi_driver_data_p->gpio_num=39
- E/PrintK ( 1): <3>[HDMI] i2c_hdmi_probe-ret:0
- E/PrintK ( 1): <3>[HDMI] i2c_hdmiedid_probe() + !!
- E/PrintK ( 1): <3>[HDMI] i2c_hdmiedid_probe() - !!
- E/PrintK ( 1): <3>[HDMI ]i2c_hdmicec_probe()+
- E/PrintK ( 1): <3>[HDMI ]i2c_hdmicec_probe()-
- E/PrintK ( 1): <3>[HDMI ] i2c_hdmipkt_probe()+
- E/PrintK ( 1): <3>[HDMI ] i2c_hdmipkt_probe()+
- E/PrintK ( 1): <3>lcdc_hdmi_init, system_rev=21
- E/PrintK ( 1): <3>lcdc_hdmi_init(): Finish i2c_add_driver...ret=0...HDMI
- W/PrintK ( 1): call lcdc_hdmi_init()
- W/PrintK ( 1): BootLog, -lcdc_adv7520_init
- W/PrintK ( 1): , ret=0
- D/PrintK ( 1): <6>msm_serial: detected port #0
- D/PrintK ( 1): <6>msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 229) is a MSM
- D/PrintK ( 1): <6>msm_serial: driver initialized
- D/PrintK ( 1): <6>BootLog, +msm_serial_hs_init
- D/PrintK ( 1): <6>msm_serial_hs.1: ttyHS1 at MMIO 0xa0900000 (irq = 52) is a MSM HS UART
- D/PrintK ( 1): <6>BootLog, -msm_serial_hs_init, ret=0
- D/PrintK ( 1): <6>loop: module loaded
- D/PrintK ( 1): <6>pmem: Initializing pmem_kernel_ebi1 (in-kernel)
- D/PrintK ( 1): <6>pmem: Initializing pmem (user-space) as cached
- D/PrintK ( 1): <6>pmem: Initializing pmem_adsp (user-space) as non-cached
- D/PrintK ( 1): <6>pmem: Initializing pmem_smipool (user-space) as non-cached
- W/PrintK ( 1): BootLog, +sensors_daemon_init+
- D/PrintK ( 1): <6>input: sensors_daemon as /devices/virtual/input/input1
- W/PrintK ( 1): BootLog, -sensors_daemon_init-, ret=0
- D/PrintK ( 1): <6>TPS65023: PMIC probed.
- D/PrintK ( 1): <6>msm_nand_probe: phys addr 0xa0a00000
- D/PrintK ( 1): <6>msm_nand_probe: dmac 0x7
- D/PrintK ( 1): <6>msm_nand_probe: allocated dma buffer at ff009000, dma_addr 3fa6c000
- D/PrintK ( 1): <6>status: c03020
- D/PrintK ( 1): <6>nandid: 5500bcec maker ec device bc
- D/PrintK ( 1): <6>Found a supported NAND device
- D/PrintK ( 1): <6>NAND Id : 0x5500bcec
- D/PrintK ( 1): <6>Buswidth : 16 Bits
- D/PrintK ( 1): <6>Density : 512 MByte
- D/PrintK ( 1): <6>Pagesize : 2048 Bytes
- D/PrintK ( 1): <6>Erasesize: 131072 Bytes
- D/PrintK ( 1): <6>Oobsize : 64 Bytes
- D/PrintK ( 1): <6>CFG0 Init : 0xa85408c0
- D/PrintK ( 1): <6>CFG1 Init : 0x0004745e
- D/PrintK ( 1): <6>ECCBUFCFG : 0x00000203
- I/PrintK ( 1): <5>Creating 8 MTD partitions on "msm_nand":
- I/PrintK ( 1): <5>0x000003600000-0x000003b00000 : "boot"
- I/PrintK ( 1): <5>0x000003b00000-0x000004100000 : "recovery"
- I/PrintK ( 1): <5>0x000004100000-0x000004700000 : "recovery_bak"
- I/PrintK ( 1): <5>0x000004700000-0x000004740000 : "LogFilter"
- I/PrintK ( 1): <5>0x000004740000-0x000004a40000 : "oem_log"
- I/PrintK ( 1): <5>0x000004b40000-0x000004c40000 : "splash"
- I/PrintK ( 1): <5>0x000007000000-0x000017400000 : "system"
- I/PrintK ( 1): <5>0x000017400000-0x000030000000 : "userdata"
- W/PrintK ( 1): <4>mtd: partition "userdata" extends beyond the end of device "msm_nand" -- size truncated to 0x8c00000
- D/PrintK ( 1): <6>PPP generic driver version 2.4.2
- D/PrintK ( 1): <6>PPP Deflate Compression module registered
- D/PrintK ( 1): <6>PPP BSD Compression module registered
- D/PrintK ( 1): <6>PPP MPPE Compression module registered
- D/PrintK ( 1): <6>NET: Registered protocol family 24
- D/PrintK ( 1): <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- D/PrintK ( 1): <6>CSLIP: code copyright 1989 Regents of the University of California.
- D/PrintK ( 1): <6>tun: Universal TUN/TAP device driver, 1.6
- D/PrintK ( 1): <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- W/PrintK ( 1): rmnet_init
- D/PrintK ( 1): <6>vreg_enable: usb enabled
- E/PrintK ( 1): <3>msm_otg_probe: chg_init failed
- D/PrintK ( 1): <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- D/PrintK ( 1): <6>host driver registered w/ tranceiver
- D/PrintK ( 1): <6>usbcore: registered new interface driver cdc_acm
- D/PrintK ( 1): <6>cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
- D/PrintK ( 1): <6>Initializing USB Mass Storage driver...
- D/PrintK ( 1): <6>usbcore: registered new interface driver usb-storage
- D/PrintK ( 1): <6>USB Mass Storage support registered.
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-alauda
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-cypress
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-datafab
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-freecom
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-isd200
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-jumpshot
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-karma
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-onetouch
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-sddr09
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-sddr55
- D/PrintK ( 1): <6>usbcore: registered new interface driver ums-usbat
- D/PrintK ( 1): <6>peripheral driver registered w/ tranceiver
- D/PrintK ( 1): <6>android_usb gadget: android_usb ready
- W/PrintK ( 1): <4>android_usb gadget: using random self ethernet address
- W/PrintK ( 1): <4>android_usb gadget: using random host ethernet address
- D/PrintK ( 1): <6>usb0: MAC 9a:50:c8:38:52:07
- D/PrintK ( 1): <6>usb0: HOST MAC b2:8a:c2:a4:04:47
- D/PrintK ( 1): <6>Sonia:f_adb.c adb_bind_config create /proc/adb_debug/mode entry
- D/PrintK ( 1): <6>diagfwd initializing ..
- D/PrintK ( 1): <6>diag opened SMD port ; r = 0
- D/PrintK ( 1): <6>diag opened SMD port ; r = 0
- D/PrintK ( 1): <6>diagchar initializing ..
- D/PrintK ( 1): <6>diagchar initialized
- D/PrintK ( 1): <6>mice: PS/2 mouse device common for all mice
- E/PrintK ( 1): <3>+qi2ccapkybd_init
- D/PrintK ( 1): <6>input: synaptics_capsensor as /devices/i2c-0/0-002c/input/input2
- E/PrintK ( 1): <3>qi2ccapkybd_eventcb()
- V/PrintK ( 1): <7>Registered led device: button-backlight
- E/PrintK ( 1): <3>-qi2ccapkybd_init
- W/PrintK ( 1): BootLog, +ts_init
- D/PrintK ( 1): <6>input: auo_touchscreen as /devices/i2c-0/0-005c/input/input3
- D/PrintK ( 1): <6>vreg_enable: gp2 enabled
- W/PrintK ( 1): BootLog, -ts_init, ret=0
- E/PrintK ( 1): <3>Jackie: gpio_direction_input for input 33
- E/PrintK ( 1): <3>Jackie: gpio_direction_input for input 34
- E/PrintK ( 1): <3>Jackie: gpio_direction_input for input 41
- E/PrintK ( 1): <3>Jackie: gpio_direction_input for input 42
- D/PrintK ( 1): <6>GPIO Matrix Keypad Driver: Start keypad matrix for surf_keypad in interrupt mode
- D/PrintK ( 1): <6>input: surf_keypad as /devices/virtual/input/input4
- W/PrintK ( 1): BootLog, +cover_init
- W/PrintK ( 1): BootLog, -cover_init
- W/PrintK ( 1): BootLog, +qsd_lsensor_init
- D/PrintK ( 1): <6>[ALS]qsd_lsensor_init lsensor_workqueue created PASS!
- D/PrintK ( 1): <6>[ALS]create /sys/devices/virtual/misc/lsensor_taos/ctrl
- D/PrintK ( 1): <6>[ALS]input_allocate_device: PASS
- D/PrintK ( 1): <6>input: lsensor_cm3204 as /devices/virtual/input/input5
- D/PrintK ( 1): <6>[ALS]input_register_device: PASS
- D/PrintK ( 1): <6>lsensor_notifier_handler: status:0
- D/PrintK ( 1): <6>lsensor_notifier_handler: Pull Down ALS gpio
- W/PrintK ( 1): BootLog, -qsd_lsensor_init, ret=0
- W/PrintK ( 1): BootLog, +psensor_init+
- D/PrintK ( 1): <6>set PS_INT GPIO 159 as IN_NoPull
- D/PrintK ( 1): <6>set PS_ENA GPIO 19 as GPIO_PULL_UP
- D/PrintK ( 1): <6>psensor_init(), pull high PS_SD to disable P-sensor
- D/PrintK ( 1): <6>input: psensor_cm3603 as /devices/virtual/input/input6
- E/PrintK ( 1): <3>platform_driver_register pass
- E/PrintK ( 1): <3>platform_driver_register pass2
- E/PrintK ( 1): <3>platform_driver_register pass3
- W/PrintK ( 1): BootLog, -psensor_init-, ret=0
- E/PrintK ( 1): <3>msm_rpc_client_req: RPC call was not successful (3)
- D/PrintK ( 1): <6>using rtc device, msm_rtc, for alarms
- D/PrintK ( 1): <6>rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
- D/PrintK ( 1): <6>rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
- D/PrintK ( 1): <6>i2c /dev entries driver
- W/PrintK ( 1): BootLog, +gsensor_init+
- W/PrintK ( 1): BootLog, -gsensor_init-, ret=0
- W/PrintK ( 1): BootLog, +ecompass_init+
- W/PrintK ( 1): BootLog, -ecompass_init-, ret=0
- D/PrintK ( 1): <6>BootLog, +bcomfm_init
- D/PrintK ( 1): <6>BootLog, -bcomfm_init, ret=0
- D/PrintK ( 1): <6>Linux video capture interface: v2.00
- W/PrintK ( 1): BootLog, +ov5642_sensor_probe
- W/PrintK ( 1): BootLog, -ov5642_sensor_probe, ret=0
- W/PrintK ( 1): BootLog, +ov7690_sensor_probe
- W/PrintK ( 1): BootLog, -ov7690_sensor_probe, ret=0
- W/PrintK ( 1): BootLog, +qsd_bat_init
- W/PrintK ( 1): [BAT]qsd_bat_probe Gauge IC CTRL_STATUS 0025
- W/PrintK ( 1): [BAT]qsd_bat_probe Gauge IC QMax Enabled!
- W/PrintK ( 1): [BAT]qsd_bat_probe Gauge IC (AA) access Pass!
- W/PrintK ( 1): [BAT]qsd_bat_probe Charge IC (80) access PASS! (Reg=22 0A 00)
- W/PrintK ( 1): [BAT](00-0B= 92 65 CA 22 25 07 6F D5 A4 20 10 81)
- W/PrintK ( 1): [BAT](31~39= 98 00 44 30 40 05 00 00 03) (22 0A 00)
- W/PrintK ( 1): [BAT]CHG_INT=1, BAT_LOW=1
- W/PrintK ( 1): [BAT]qsd_bat_probe flight mode = 0
- W/PrintK ( 1): [BAT]qsd_bat_probe low_bat_power_off = 0
- W/PrintK ( 1): [BAT]qsd_bat_probe smem_bat_base buffer = 0xFA147980
- W/PrintK ( 1): BootLog, -qsd_bat_init, ret=0
- D/PrintK ( 1): <6>device-mapper: uevent: version 1.0.3
- D/PrintK ( 1): <6>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- D/PrintK ( 1): <6>Bluetooth: HCI UART driver ver 2.2
- D/PrintK ( 1): <6>Bluetooth: HCI H4 protocol initialized
- D/PrintK ( 1): <6>BootLog, +bluesleep_init
- D/PrintK ( 1): <6>BootLog, -bluesleep_init, ret=0
- W/PrintK ( 1): BootLog, +msmsdcc_init+
- W/PrintK ( 1): BootLog, -msmsdcc_init-
- E/PrintK ( 1): <3>mmc0: No card detect facilities available
- D/PrintK ( 1): <6>mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 10,0 dma 8
- D/PrintK ( 1): <6>mmc0: 8 bit data mode disabled
- D/PrintK ( 1): <6>mmc0: 4 bit data mode enabled
- D/PrintK ( 1): <6>mmc0: polling status mode disabled
- D/PrintK ( 1): <6>mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
- D/PrintK ( 1): <6>mmc0: Slot eject status = 0
- D/PrintK ( 1): <6>mmc0: Power save feature enable = 1
- D/PrintK ( 1): <6>mmc0: DM non-cached buffer at ff00d000, dma_addr 0x3fb13000
- D/PrintK ( 1): <6>mmc0: DM cmd busaddr 0x3fb13000, cmdptr busaddr 0x3fb13300
- E/PrintK ( 1): <3>mmc1: No card detect facilities available
- D/PrintK ( 1): <6>mmc1: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,0 dma 10
- D/PrintK ( 1): <6>mmc1: 8 bit data mode disabled
- D/PrintK ( 1): <6>mmc1: 4 bit data mode enabled
- D/PrintK ( 1): <6>mmc1: polling status mode disabled
- D/PrintK ( 1): <6>mmc1: MMC clock 144000 -> 25000000 Hz, PCLK 64000000 Hz
- D/PrintK ( 1): <6>mmc1: Slot eject status = 0
- D/PrintK ( 1): <6>mmc1: Power save feature enable = 1
- D/PrintK ( 1): <6>mmc1: DM non-cached buffer at ff00e000, dma_addr 0x3fb16000
- D/PrintK ( 1): <6>mmc1: DM cmd busaddr 0x3fb16000, cmdptr busaddr 0x3fb16300
- D/PrintK ( 1): <6>mmc2: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,224 dma 10
- D/PrintK ( 1): <6>mmc2: 8 bit data mode disabled
- D/PrintK ( 1): <6>mmc2: 4 bit data mode enabled
- D/PrintK ( 1): <6>mmc2: polling status mode disabled
- D/PrintK ( 1): <6>mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
- D/PrintK ( 1): <6>mmc2: Slot eject status = 0
- D/PrintK ( 1): <6>mmc2: Power save feature enable = 1
- D/PrintK ( 1): <6>mmc2: DM non-cached buffer at ff00f000, dma_addr 0x3fb17000
- D/PrintK ( 1): <6>mmc2: DM cmd busaddr 0x3fb17000, cmdptr busaddr 0x3fb17300
- W/PrintK ( 1): BootLog, +qsd_led_init
- V/PrintK ( 1): <7>Registered led device: als
- V/PrintK ( 1): <7>Registered led device: spotlight
- W/PrintK ( 1): BootLog, -qsd_led_init, ret=0
- W/PrintK ( 1): [BAT]qsd_bat_probe Gauge IC FW_VERSION 0130
- D/PrintK ( 1): <6>usbcore: registered new interface driver usbhid
- D/PrintK ( 1): <6>usbhid: USB HID core driver
- D/PrintK ( 1): <6>logger: created 1024K log 'log_main'
- D/PrintK ( 1): <6>logger: created 256K log 'log_events'
- D/PrintK ( 1): <6>logger: created 512K log 'log_radio'
- D/PrintK ( 1): <6>logger: created 64K log 'log_system'
- D/PrintK ( 1): <6>logger_filter_init: version:0 num:0 toff:0 voff:0
- D/PrintK ( 1): <6>logger_filter_init: filter size:131072
- D/PrintK ( 1): <6>Netfilter messages via NETLINK v0.30.
- D/PrintK ( 1): <6>nf_conntrack version 0.5.0 (6175 buckets, 24700 max)
- D/PrintK ( 1): <6>ctnetlink v0.93: registering with nfnetlink.
- D/PrintK ( 1): <6>xt_time: kernel timezone is -0000
- D/PrintK ( 1): <6>IPv4 over IPv4 tunneling driver
- D/PrintK ( 1): <6>GRE over IPv4 tunneling driver
- D/PrintK ( 1): <6>ip_tables: (C) 2000-2006 Netfilter Core Team
- D/PrintK ( 1): <6>arp_tables: (C) 2002 David S. Miller
- D/PrintK ( 1): <6>TCP cubic registered
- D/PrintK ( 1): <6>NET: Registered protocol family 17
- D/PrintK ( 1): <6>Bluetooth: L2CAP ver 2.14
- D/PrintK ( 1): <6>Bluetooth: L2CAP socket layer initialized
- D/PrintK ( 1): <6>Bluetooth: SCO (Voice Link) ver 0.6
- D/PrintK ( 1): <6>Bluetooth: SCO socket layer initialized
- D/PrintK ( 1): <6>Bluetooth: RFCOMM TTY layer initialized
- D/PrintK ( 1): <6>Bluetooth: RFCOMM socket layer initialized
- D/PrintK ( 1): <6>Bluetooth: RFCOMM ver 1.11
- D/PrintK ( 1): <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- D/PrintK ( 1): <6>Bluetooth: BNEP filters: protocol multicast
- D/PrintK ( 1): <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- D/PrintK ( 1): <6>lib80211: common routines for IEEE802.11 drivers
- V/PrintK ( 1): <7>lib80211_crypt: registered algorithm 'NULL'
- D/PrintK ( 1): <6>ThumbEE CPU extension supported.
- D/PrintK ( 1): <6>input: 8k_handset as /devices/virtual/input/input7
- W/PrintK ( 1): [KEY]Enable feature: Power Key 8 sec, then power down!
- D/PrintK ( 1): <6>__msm_rpc_connect: server not found 30000091:30001
- D/PrintK ( 1): <6>__msm_rpc_connect: server not found 30000091:20001
- W/PrintK ( 70): [BAT]## usb_current: 0 -> 100
- W/PrintK ( 70): [BAT]## bat_status: Unknown -> Not charging
- W/PrintK ( 70): [BAT]## bat_health: Unknown -> Good
- W/PrintK ( 70): [BAT]## bat_capacity: 66 (66), vol: 3885, ma: 50, fcc: 1214, temp: 313
- W/PrintK ( 70): [BAT]## bat_low: 0 -> 1
- E/PrintK ( 80): <3>[SEAN]uppp rpc_clients_thread, rt_pri=88,pri=11
- W/PrintK ( 80): +report_hs_key 319+
- D/PrintK ( 80): <6>q6audio_update_AC_5V_status, tid = 80: g_ac_5v_status = 0, rx_acdb = 0, audio_rx_device_id = 0x107ac88
- V/PrintK ( 80): -report_hs_key ret bat 408-
- E/PrintK ( 1): <3>msm_rpc_client_req: RPC call was not successful (4)
- E/PrintK ( 1): <3>hs_rpc_cb_init: RPC client request failed for pwr key delay cmd, using normal mode
- D/PrintK ( 1): <6>VFP support v0.3:
- V/PrintK ( 1): implementor 51 architecture 64 part 0f variant 0 rev 1
- E/PrintK ( 80): <3>[SEAN]down rpc_clients_thread, rt_pri=0,pri=120
- D/PrintK ( 1): <6>rs30000048 rs30000048.65536: setting system clock to 2013-06-21 16:47:48 UTC (1371833268)
- D/PrintK ( 1): <6>msm_v4l2: msm_v4l2_init
- W/PrintK ( 1): <4>Warning: unable to open an initial console.
- D/PrintK ( 1): <6>Freeing init memory: 160K
- D/PrintK ( 1): <6>CFS CPU scheduler.
- E/PrintK ( 1): <3>init: /init.streak.rc: 87: ignored duplicate definition of service 'qmuxd'
- W/PrintK ( 15): [SDCC] CSD[0] = 0x 260132
- W/PrintK ( 15): [SDCC] CSD[1] = 0x5b5a83c7
- W/PrintK ( 15): [SDCC] CSD[2] = 0xf6dbff9f
- W/PrintK ( 15): [SDCC] CSD[3] = 0x16804018
- W/PrintK ( 15): <4>mmc0: host does not support reading read-only switch. assuming write-enable.
- D/PrintK ( 15): <6>mmc0: new high speed SD card at address 0001
- D/PrintK ( 15): <6>innersd0: mmc0:0001 00000 1.89 GiB
- D/PrintK ( 15): <6> innersd0:
- V/PrintK ( 15): p1
- V/PrintK ( 15): <
- V/PrintK ( 15): p5
- V/PrintK ( 15): p6
- V/PrintK ( 15): >
- V/PrintK ( 15):
- W/PrintK ( 15): <4>mmc1: host doesn't support card's voltages
- E/PrintK ( 15): <3>mmc1: error -22 whilst initialising SDIO card
- D/PrintK ( 1): <6>yaffs: dev is 32505862 name is "mtdblock6"
- D/PrintK ( 1): <6>yaffs: passed flags ""
- W/PrintK ( 1): yaffs: Attempting MTD mount on 31.6, "mtdblock6"
- W/PrintK ( 15): [SDCC] CSD[0] = 0x400e0032
- W/PrintK ( 15): [SDCC] CSD[1] = 0x5b590000
- W/PrintK ( 15): [SDCC] CSD[2] = 0x76b27f80
- W/PrintK ( 15): [SDCC] CSD[3] = 0x a404012
- D/PrintK ( 15): <6>msm_sdcc_get_wpswitch: WP/CD Status for Slot 1 = 0x0
- D/PrintK ( 15): <6>msm_sdcc_get_wpswitch: WP/CD Status for Slot 1 = 0x0
- D/PrintK ( 15): <6>mmc2: new high speed SDHC card at address e624
- D/PrintK ( 15): <6>mmcblk1: mmc2:e624 SU16G 14.8 GiB
- D/PrintK ( 15): <6> mmcblk1:
- V/PrintK ( 15): p1
- V/PrintK ( 15):
- V/PrintK ( 15): <7>[SDCC] set_irq_type::high
- W/PrintK ( 1): <4>yaffs: restored from checkpoint
- W/PrintK ( 1): yaffs_read_super: isCheckpointed 1
- D/PrintK ( 1): <6>yaffs: dev is 32505863 name is "mtdblock7"
- D/PrintK ( 1): <6>yaffs: passed flags ""
- W/PrintK ( 1): yaffs: Attempting MTD mount on 31.7, "mtdblock7"
- W/PrintK ( 1): <4>yaffs: restored from checkpoint
- W/PrintK ( 1): yaffs_read_super: isCheckpointed 1
- W/PrintK ( 70): [BAT]## bat_status: Not charging -> Discharging
- D/PrintK ( 1): <6>EXT4-fs (innersd0p6):
- V/PrintK ( 1): recovery complete
- V/PrintK ( 1):
- D/PrintK ( 1): <6>EXT4-fs (innersd0p6):
- V/PrintK ( 1): mounted filesystem with writeback data mode. Opts: data=writeback
- V/PrintK ( 1):
- D/PrintK ( 1): <6>EXT4-fs (innersd0p5):
- V/PrintK ( 1): recovery complete
- V/PrintK ( 1):
- D/PrintK ( 1): <6>EXT4-fs (innersd0p5):
- V/PrintK ( 1): mounted filesystem with writeback data mode. Opts: data=writeback
- V/PrintK ( 1):
- E/PrintK ( 1): <3>init: cannot find '/system/bin/qmuxd', disabling 'qmuxd'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/rild', disabling 'ril-daemon'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/DrmHost', disabling 'DrmHost'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/hidkbd', disabling 'hidkbd'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/mmService', disabling 'oemDrmService'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/sensors_daemon', disabling 'sensors_daemon'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/lightsensor', disabling 'lightsensor'
- E/PrintK ( 1): <3>init: cannot find '/system/bin/calibrate', disabling 'calibrate'
- E/PrintK ( 1): <3>init: service 'console' requires console
- I/DEBUG ( 94): debuggerd: Jun 21 2013 08:06:52
- W/PrintK ( 97): [TIME]## <1>[ 0],[0][0][0][0][0][0][1371833271],[1371833271]
- --------- beginning of /dev/log/system
- I/Vold ( 92): Vold 2.1 (the revenge) firing up
- D/Vold ( 92): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
- D/Vold ( 92): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
- D/DirectVolume( 92): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 1, PARTN 1
- D/DirectVolume( 92): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 5, PARTN 5
- E/DirectVolume( 92): Invalid 'PARTN' value
- D/DirectVolume( 92): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 6, PARTN 6
- E/DirectVolume( 92): Invalid 'PARTN' value
- W/Vold ( 92): Duplicate state (2)
- D/DirectVolume( 92): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 33, PARTN 1
- D/Vold ( 92): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
- I/Netd ( 93): Netd 1.0 starting
- D/PrintK ( 0): <6>android_usb gadget: high speed config #1: android
- D/AndroidRuntime( 95):
- D/AndroidRuntime( 95): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
- D/AndroidRuntime( 95): CheckJNI is OFF
- E/BandwidthController( 93): runIptablesCmd(): failed /system/bin/ip6tables -N bw_INPUT res=768
- D/PrintK ( 4): <6>
- D/PrintK ( 4): Charger Type: STD DOWNSTREAM PORT
- W/PrintK ( 70): [BAT]## usb_online: 0 -> 1
- W/PrintK ( 70): [BAT]## usb_current: 100 -> 500
- W/PrintK ( 70): [BAT]## bat_status: Discharging -> Charging
- W/PrintK ( 70): [BAT]## wake_lock: 0 -> 1, vol: 3824, ac: 0, usb: 1, flight: 0, bat_low: 1
- I/mediaserver( 96): ServiceManager: 0x2a008d78
- I/AudioFlinger( 96): Using default 3000 mSec as standby time.
- I/CameraService( 96): CameraService started (pid=96)
- E/CameraService( 96): Could not load camera HAL module
- E/BandwidthController( 93): runIptablesCmd(): failed /system/bin/ip6tables -A bw_INPUT -i lo --jump RETURN res=768
- E/Netd ( 93): Unable to create netlink socket: Protocol not supported
- E/Netd ( 93): Unable to open quota2 logging socket
- D/MDnsDS ( 93): MDnsSdListener::Hander starting up
- E/Netd ( 93): Unable to start MDnsSdListener (Invalid argument)
- E/SocketListener( 93): Obtaining file descriptor socket 'mdns' failed: Invalid argument
- E/AudioPolicyManagerBase( 96): could not load audio policy configuration file, setting defaults
- I/AudioFlinger( 96): loadHwModule() Loaded primary audio interface from Default audio HW HAL (audio) handle 1
- I/AudioFlinger( 96): HAL output buffer size 1024 frames, normal mix buffer size 1024 frames
- I/AudioMixer( 96): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project
- I/AudioFlinger( 96): AudioFlinger's thread 0x2a009e10 ready to run
- I/AudioFlinger( 96): Using module 1 has the primary audio interface
- W/AudioFlinger( 96): Thread AudioOut_2 cannot connect to the power manager service
- I/AudioPolicyService( 96): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy)
- E/SchedPolicy( 96): open of /dev/cpuctl/apps/tasks failed: No such file or directory
- E/SchedPolicy( 96): open of /dev/cpuctl/apps/bg_non_interactive/tasks failed: No such file or directory
- E/SchedPolicy( 96): add_tid_to_cgroup failed; policy=1
- E/SchedPolicy( 96): add_tid_to_cgroup failed; policy=1
- E/SchedPolicy( 96): add_tid_to_cgroup failed; policy=1
- E/SchedPolicy( 96): add_tid_to_cgroup failed; policy=1
- D/dalvikvm( 95): Trying to load lib libjavacore.so 0x0
- D/dalvikvm( 95): Added shared lib libjavacore.so 0x0
- D/dalvikvm( 95): Trying to load lib libnativehelper.so 0x0
- D/dalvikvm( 95): Added shared lib libnativehelper.so 0x0
- I/SamplingProfilerIntegration( 95): Profiling disabled.
- I/Zygote ( 95): Preloading classes...
- D/dalvikvm( 95): GC_EXPLICIT freed 37K, 80% free 419K/2048K, paused 2ms+2ms, total 6ms
- W/Zygote ( 95): Class not found for preloading: android.animation.ValueAnimator$2
- W/Zygote ( 95): Class not found for preloading: android.animation.ValueAnimator$3
- W/Zygote ( 95): Class not found for preloading: android.animation.ValueAnimator$4
- W/Zygote ( 95): Class not found for preloading: android.animation.ValueAnimator$5
- W/Zygote ( 95): Class not found for preloading: android.content.res.Resources$1
- W/Zygote ( 95): Class not found for preloading: android.database.sqlite.SQLiteCompiledSql
- W/Zygote ( 95): Class not found for preloading: android.database.sqlite.SQLiteDatabase$DatabaseReentrantLock
- D/TextLayoutCache( 95): Using debug level = 0 - Debug Enabled = 0
- E/JNIHelp ( 95): Native registration unable to find class 'android/media/videoeditor/VideoEditorProfile', aborting
- F/libc ( 95): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1), thread 95 (zygote)
- I/DEBUG ( 94): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
- I/DEBUG ( 94): Build fingerprint: 'dell/streak5/streak5:4.1.2/JZO54K/eng.giveen.20130621.081232:userdebug/test-keys'
- I/DEBUG ( 94): pid: 95, tid: 95, name: zygote >>> zygote <<<
- I/DEBUG ( 94): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr deadbaad
- I/DEBUG ( 94): r0 00000027 r1 deadbaad r2 40073b10 r3 00000000
- I/DEBUG ( 94): r4 00000000 r5 becd16dc r6 00000000 r7 00000004
- I/DEBUG ( 94): r8 482005f4 r9 00000001 sl 00000000 fp 00000000
- I/DEBUG ( 94): ip 403acfe0 sp becd16d8 lr 400459b1 pc 40042072 cpsr 60010030
- I/DEBUG ( 94): d0 74726f6261202c27 d1 2f726f746964656f
- I/DEBUG ( 94): d2 6964456f65646956 d3 69666f7250726f74
- I/DEBUG ( 94): d4 44cbffa844c872b0 d5 44cc001844cbffe0
- I/DEBUG ( 94): d6 44cc008844cc0050 d7 44cc00f844cc00c0
- I/DEBUG ( 94): d8 0000000000000000 d9 0000000000000000
- I/DEBUG ( 94): d10 0000000000000000 d11 0000000000000000
- I/DEBUG ( 94): d12 0000000000000000 d13 0000000000000000
- I/DEBUG ( 94): d14 0000000000000000 d15 0000000000000000
- I/DEBUG ( 94): d16 000000001636a7b8 d17 0000000016336541
- I/DEBUG ( 94): d18 0000000000000000 d19 0000000000000000
- I/DEBUG ( 94): d20 0000000000000000 d21 0000000000000000
- I/DEBUG ( 94): d22 0000000000000000 d23 0000000000000000
- I/DEBUG ( 94): d24 0000000000000000 d25 0000000000000000
- I/DEBUG ( 94): d26 0000000000000000 d27 0000000000000000
- I/DEBUG ( 94): d28 0000000000000000 d29 0000000000000000
- I/DEBUG ( 94): d30 0000000000000000 d31 0000000000000000
- I/DEBUG ( 94): scr 60000010
- I/DEBUG ( 94):
- I/DEBUG ( 94): backtrace:
- I/DEBUG ( 94): #00 pc 00018072 /system/lib/libc.so
- I/DEBUG ( 94): #01 pc 0000dc34 /system/lib/libc.so (abort+4)
- I/DEBUG ( 94): #02 pc 00000955 /system/lib/libnativehelper.so (jniRegisterNativeMethods+72)
- I/DEBUG ( 94): #03 pc 000144a5 /system/lib/libmedia_jni.so (register_android_media_MediaProfiles(_JNIEnv*)+92)
- I/DEBUG ( 94): #04 pc 00010f57 /system/lib/libmedia_jni.so (JNI_OnLoad+162)
- I/DEBUG ( 94): #05 pc 0004f6af /system/lib/libdvm.so (dvmLoadNativeCode(char const*, Object*, char**)+450)
- I/DEBUG ( 94): #06 pc 000660f5 /system/lib/libdvm.so
- I/DEBUG ( 94): #07 pc 0004f1eb /system/lib/libdvm.so (dvmResolveNativeMethod(unsigned int const*, JValue*, Method const*, Thread*)+174)
- I/DEBUG ( 94): #08 pc 000274e0 /system/lib/libdvm.so
- I/DEBUG ( 94): #09 pc 0002bdc4 /system/lib/libdvm.so (dvmInterpret(Thread*, Method const*, JValue*)+180)
- I/DEBUG ( 94): #10 pc 0005f831 /system/lib/libdvm.so (dvmCallMethodV(Thread*, Method const*, Object*, bool, JValue*, std::__va_list)+272)
- I/DEBUG ( 94): #11 pc 0005f85b /system/lib/libdvm.so (dvmCallMethod(Thread*, Method const*, Object*, JValue*, ...)+20)
- I/DEBUG ( 94): #12 pc 0006a551 /system/lib/libdvm.so (dvmInitClass+1032)
- I/DEBUG ( 94): #13 pc 0006a6c5 /system/lib/libdvm.so (dvmFindClass(char const*, Object*)+16)
- I/DEBUG ( 94): #14 pc 0006417f /system/lib/libdvm.so (dvmFindClassByName(StringObject*, Object*, bool)+78)
- I/DEBUG ( 94): #15 pc 00065ee5 /system/lib/libdvm.so
- I/DEBUG ( 94): #16 pc 000274e0 /system/lib/libdvm.so
- I/DEBUG ( 94): #17 pc 0002bdc4 /system/lib/libdvm.so (dvmInterpret(Thread*, Method const*, JValue*)+180)
- I/DEBUG ( 94): #18 pc 0005f831 /system/lib/libdvm.so (dvmCallMethodV(Thread*, Method const*, Object*, bool, JValue*, std::__va_list)+272)
- I/DEBUG ( 94): #19 pc 00049727 /system/lib/libdvm.so
- I/DEBUG ( 94): #20 pc 00047afd /system/lib/libandroid_runtime.so
- I/DEBUG ( 94): #21 pc 000485df /system/lib/libandroid_runtime.so (android::AndroidRuntime::start(char const*, char const*)+390)
- I/DEBUG ( 94): #22 pc 00000dcf /system/bin/app_process
- I/DEBUG ( 94):
- I/DEBUG ( 94): stack:
- I/DEBUG ( 94): becd1698 2a07bd20 [heap]
- I/DEBUG ( 94): becd169c 00000000
- I/DEBUG ( 94): becd16a0 00000004
- I/DEBUG ( 94): becd16a4 482005f4 /system/lib/libmedia_jni.so
- I/DEBUG ( 94): becd16a8 00000001
- I/DEBUG ( 94): becd16ac 00000000
- I/DEBUG ( 94): becd16b0 4006e774 /system/lib/libc.so
- I/DEBUG ( 94): becd16b4 40073d14
- I/DEBUG ( 94): becd16b8 00000000
- I/DEBUG ( 94): becd16bc 400459b1 /system/lib/libc.so (_fwalk+32)
- I/DEBUG ( 94): becd16c0 00000001
- I/DEBUG ( 94): becd16c4 becd16dc [stack]
- I/DEBUG ( 94): becd16c8 00000000
- I/DEBUG ( 94): becd16cc 00000004
- I/DEBUG ( 94): becd16d0 df0027ad
- I/DEBUG ( 94): becd16d4 00000000
- I/DEBUG ( 94): #00 becd16d8 becd16f4 [stack]
- I/DEBUG ( 94): becd16dc fffffbdf
- I/DEBUG ( 94): becd16e0 00000000
- I/DEBUG ( 94): becd16e4 40778fb1 /system/lib/libdvm.so
- I/DEBUG ( 94): becd16e8 00000000
- I/DEBUG ( 94): becd16ec 17a3b846
- I/DEBUG ( 94): becd16f0 2a008460 [heap]
- I/DEBUG ( 94): becd16f4 2a008460 [heap]
- I/DEBUG ( 94): becd16f8 481fa26f /system/lib/libmedia_jni.so
- I/DEBUG ( 94): becd16fc 40037c38 /system/lib/libc.so (__pthread_clone)
- I/DEBUG ( 94): #01 becd1700 17a3b846
- I/DEBUG ( 94): becd1704 403aa959 /system/lib/libnativehelper.so (jniRegisterNativeMethods+76)
- I/DEBUG ( 94): #02 becd1708 2a008460 [heap]
- I/DEBUG ( 94): becd170c 00000000
- I/DEBUG ( 94): becd1710 2a008460 [heap]
- I/DEBUG ( 94): becd1714 00000000
- I/DEBUG ( 94): becd1718 00000000
- I/DEBUG ( 94): becd171c 00000000
- I/DEBUG ( 94): becd1720 00000000
- I/DEBUG ( 94): becd1724 481ea4a9 /system/lib/libmedia_jni.so (register_android_media_MediaProfiles(_JNIEnv*)+96)
- I/DEBUG ( 94):
- I/DEBUG ( 94): memory near r2:
- I/DEBUG ( 94): 40073af0 00000000 00000000 00000000 00000000 ................
- I/DEBUG ( 94): 40073b00 00000000 17a3b846 00000000 00000000 ....F...........
- I/DEBUG ( 94): 40073b10 00000001 00000000 00000000 00000000 ................
- I/DEBUG ( 94): 40073b20 00000000 00000000 00000000 00000000 ................
- I/DEBUG ( 94): 40073b30 00000000 00000000 00000000 00000000 ................
- I/DEBUG ( 94):
- I/DEBUG ( 94): memory near r5:
- I/DEBUG ( 94): becd16bc 400459b1 00000001 becd16dc 00000000 .Y.@............
- I/DEBUG ( 94): becd16cc 00000004 df0027ad 00000000 becd16f4 .....'..........
- I/DEBUG ( 94): becd16dc fffffbdf 00000000 40778fb1 00000000 ..........w@....
- I/DEBUG ( 94): becd16ec 17a3b846 2a008460 2a008460 481fa26f F...`..*`..*o..H
- I/DEBUG ( 94): becd16fc 40037c38 17a3b846 403aa959 2a008460 8|.@F...Y.:@`..*
- I/DEBUG ( 94):
- I/DEBUG ( 94): memory near r8:
- I/DEBUG ( 94): 482005d4 481f7abb 481e9d59 481fa76f 481fa5a9 .z.HY..Ho..H...H
- I/DEBUG ( 94): 482005e4 481e9b29 481fa79c 481fa7c4 481e9b4d )..H...H...HM..H
- I/DEBUG ( 94): 482005f4 481f7abf 481f7abb 481e9d59 481fa7ca .z.H.z.HY..H...H
- I/DEBUG ( 94): 48200604 481fa7e9 481e9e2d 481fa81a 481fa5a9 ...H-..H...H...H
- I/DEBUG ( 94): 48200614 481e9df1 481fa840 481fa5a9 481e9db5 ...H@..H...H...H
- I/DEBUG ( 94):
- I/DEBUG ( 94): memory near ip:
- I/DEBUG ( 94): 403acfc0 00000000 40073b04 00000000 00000000 .....;.@........
- I/DEBUG ( 94): 403acfd0 00000000 4004c859 40046361 40026489 ....Y..@ac.@.d.@
- I/DEBUG ( 94): 403acfe0 40037c30 4004c821 40044769 40026131 0|.@!..@iG.@1a.@
- I/DEBUG ( 94): 403acff0 40040d61 40040f4d 40048b85 40048f3d a..@M..@...@=..@
- I/DEBUG ( 94): 403ad000 1d2000a6 44c95d18 44c95cc8 00000000 .. ..].D.\.D....
- I/DEBUG ( 94):
- I/DEBUG ( 94): memory near sp:
- I/DEBUG ( 94): becd16b8 00000000 400459b1 00000001 becd16dc .....Y.@........
- I/DEBUG ( 94): becd16c8 00000000 00000004 df0027ad 00000000 .........'......
- I/DEBUG ( 94): becd16d8 becd16f4 fffffbdf 00000000 40778fb1 ..............w@
- I/DEBUG ( 94): becd16e8 00000000 17a3b846 2a008460 2a008460 ....F...`..*`..*
- I/DEBUG ( 94): becd16f8 481fa26f 40037c38 17a3b846 403aa959 o..H8|.@F...Y.:@
- I/DEBUG ( 94):
- I/DEBUG ( 94): code around pc:
- I/DEBUG ( 94): 40042050 e000b164 6823461c d1fb2b00 68e3e026 d....F#h.+..&..h
- I/DEBUG ( 94): 40042060 4a17b123 447a2401 47986014 20274911 #..J.$zD.`.G.I'
- I/DEBUG ( 94): 40042070 70082400 ed10f7f4 f7f52106 a902ee4c .$.p.....!..L...
- I/DEBUG ( 94): 40042080 f04f2006 460a5380 94029304 f7f59403 . O..S.F........
- I/DEBUG ( 94): 40042090 4629ea2e 20024622 ea36f7f5 ecfcf7f4 ..)F"F. ..6.....
- I/DEBUG ( 94):
- I/DEBUG ( 94): code around lr:
- I/DEBUG ( 94): 40045990 41f0e92d 4c0b2600 447c4680 68a56824 -..A.&.L.F|D$h.h
- I/DEBUG ( 94): 400459a0 e0076867 300cf9b5 dd022b00 47c04628 gh.....0.+..(F.G
- I/DEBUG ( 94): 400459b0 35544306 d5f53f01 2c006824 4630d1ef .CT5.?..$h.,..0F
- I/DEBUG ( 94): 400459c0 81f0e8bd 00028b66 43f0e92d fb01461f ....f...-..C.F..
- I/DEBUG ( 94): 400459d0 f8dff602 b0878058 44f8460c 8000f8d8 ....X....F.D....
- I/DEBUG ( 94):
- I/DEBUG ( 94): memory map around fault addr deadbaad:
- I/DEBUG ( 94): becb1000-becd2000 [stack]
- I/DEBUG ( 94): (no map for address)
- I/DEBUG ( 94): (no map above)
- D/PrintK ( 1): <6>request_suspend_state: wakeup (3->0) at 7035235623 (2013-06-21 16:47:54.573866668 UTC)
- I/ServiceManager( 91): service 'media.audio_flinger' died
- I/ServiceManager( 91): service 'media.player' died
- I/ServiceManager( 91): service 'media.camera' died
- I/ServiceManager( 91): service 'media.audio_policy' died
- E/PrintK ( 1): <3>init: untracked pid 96 exited
- I/Netd ( 327): Netd 1.0 starting
- I/mediaserver( 326): ServiceManager: 0x2a008d78
- I/AudioFlinger( 326): Using default 3000 mSec as standby time.
- I/CameraService( 326): CameraService started (pid=326)
- E/CameraService( 326): Could not load camera HAL module
- E/AudioPolicyManagerBase( 326): could not load audio policy configuration file, setting defaults
- I/AudioFlinger( 326): loadHwModule() Loaded primary audio interface from Default audio HW HAL (audio) handle 1
- I/AudioFlinger( 326): HAL output buffer size 1024 frames, normal mix buffer size 1024 frames
- I/AudioMixer( 326): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project
- I/AudioFlinger( 326): Using module 1 has the primary audio interface
- I/AudioFlinger( 326): AudioFlinger's thread 0x2a009e58 ready to run
- W/AudioFlinger( 326): Thread AudioOut_2 cannot connect to the power manager service
- I/AudioPolicyService( 326): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy)
- E/SchedPolicy( 326): open of /dev/cpuctl/apps/tasks failed: No such file or directory
- E/SchedPolicy( 326): open of /dev/cpuctl/apps/bg_non_interactive/tasks failed: No such file or directory
- E/SchedPolicy( 326): add_tid_to_cgroup failed; policy=1
- E/SchedPolicy( 326): add_tid_to_cgroup failed; policy=1
- E/SchedPolicy( 326): add_tid_to_cgroup failed; policy=1
- E/SchedPolicy( 326): add_tid_to_cgroup failed; policy=1
- E/BandwidthController( 327): runIptablesCmd(): failed /system/bin/ip6tables -N bw_INPUT res=768
- E/BandwidthController( 327): runIptablesCmd(): failed /system/bin/ip6tables -A bw_INPUT -i lo --jump RETURN res=768
- E/Netd ( 327): Unable to create netlink socket: Protocol not supported
- E/Netd ( 327): Unable to open quota2 logging socket
- D/MDnsDS ( 327): MDnsSdListener::Hander starting up
- E/Netd ( 327): Unable to start MDnsSdListener (Invalid argument)
- E/SocketListener( 327): Obtaining file descriptor socket 'mdns' failed: Invalid argument
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement