Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.11.0-17-generic-tuxonice] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Momentus SpinPoint M8 (AF)
- Device Model: ST500LM012 HN-M500MBB
- Serial Number: S2U3J9CC544771
- LU WWN Device Id: 5 0004cf 20787d34a
- Firmware Version: 2AR10001
- User Capacity: 500 107 862 016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Tue Feb 25 21:13:43 2014 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 6480) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 108) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 9748
- 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
- 3 Spin_Up_Time 0x0023 091 091 025 Pre-fail Always - 2854
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 579
- 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
- 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 981
- 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 133
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 688
- 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 63
- 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0002 064 044 000 Old_age Always - 32 (Min/Max 9/56)
- 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
- 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 099 099 000 Old_age Always - 93
- 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 1
- 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3912
- 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 133
- 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5980
- SMART Error Log Version: 1
- ATA Error Count: 8 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 8 occurred at disk power-on lifetime: 972 hours (40 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 b8 6e 00 e0 Error: UNC 1 sectors at LBA = 0x00006eb8 = 28344
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 01 b8 6e 00 e0 00 00:00:00.035 READ DMA
- c8 00 01 b7 6e 00 e0 00 00:00:00.035 READ DMA
- c8 00 01 b6 6e 00 e0 00 00:00:00.035 READ DMA
- c8 00 01 b5 6e 00 e0 00 00:00:00.035 READ DMA
- c8 00 01 b4 6e 00 e0 00 00:00:00.035 READ DMA
- Error 7 occurred at disk power-on lifetime: 972 hours (40 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 b8 6e 00 e0 Error: UNC 1 sectors at LBA = 0x00006eb8 = 28344
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 01 b8 6e 00 e0 00 00:00:00.013 READ DMA
- c8 00 01 b7 6e 00 e0 00 00:00:00.013 READ DMA
- c8 00 01 b6 6e 00 e0 00 00:00:00.013 READ DMA
- c8 00 01 b5 6e 00 e0 00 00:00:00.013 READ DMA
- c8 00 01 b4 6e 00 e0 00 00:00:00.013 READ DMA
- Error 6 occurred at disk power-on lifetime: 972 hours (40 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 08 66 06 e0 Error: UNC 8 sectors at LBA = 0x00066608 = 419336
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 10 00 66 06 e0 00 00:00:00.372 READ DMA
- c8 00 10 f0 65 06 e0 00 00:00:00.371 READ DMA
- c8 00 10 e0 65 06 e0 00 00:00:00.369 READ DMA
- c8 00 10 d0 65 06 e0 00 00:00:00.368 READ DMA
- c8 00 10 c0 65 06 e0 00 00:00:00.367 READ DMA
- Error 5 occurred at disk power-on lifetime: 972 hours (40 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 10 20 65 06 e0 Error: UNC 16 sectors at LBA = 0x00066520 = 419104
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 10 20 65 06 e0 00 00:00:00.320 READ DMA
- c8 00 02 4c 64 66 e0 00 00:00:00.320 READ DMA
- c8 00 10 30 47 9d e0 00 00:00:00.320 READ DMA
- c8 00 10 20 47 9d e0 00 00:00:00.320 READ DMA
- c8 00 10 10 47 9d e0 00 00:00:00.320 READ DMA
- Error 4 occurred at disk power-on lifetime: 972 hours (40 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 10 20 ac 85 e0 Error: UNC 16 sectors at LBA = 0x0085ac20 = 8760352
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 10 20 ac 85 e0 00 00:00:00.037 READ DMA
- c8 00 10 d0 80 83 e0 00 00:00:00.037 READ DMA
- c8 00 10 c0 80 83 e0 00 00:00:00.037 READ DMA
- c8 00 10 b0 80 83 e0 00 00:00:00.037 READ DMA
- c8 00 10 a0 80 83 e0 00 00:00:00.037 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Vendor (0x50) Completed without error 00% 850 -
- # 2 Short offline Completed without error 00% 850 -
- # 3 Vendor (0x50) Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Completed [00% left] (0-65535)
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement