Guest User

Untitled

a guest
May 13th, 2013
436
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.87 KB | None | 0 0
  1. #
  2. # refind.conf
  3. # Configuration file for the rEFInd boot menu
  4. #
  5.  
  6. # Timeout in seconds for the main menu screen. Setting the timeout to 0
  7. # disables automatic booting (i.e., no timeout).
  8. #
  9. timeout 20
  10.  
  11. # Screen saver timeout; the screen blanks after the specified number of
  12. # seconds with no keyboard input. The screen returns after most keypresses
  13. # (unfortunately, not including modifier keys such as Shift, Control, Alt,
  14. # or Option). The default is 0, which disables the screen saver.
  15. #screensaver 300
  16.  
  17. # Hide user interface elements for personal preference or to increase
  18. # security:
  19. # banner - the rEFInd title banner (built-in or loaded via "banner")
  20. # label - boot option text label in the menu
  21. # singleuser - remove the submenu options to boot Mac OS X in single-user
  22. # or verbose modes; affects ONLY MacOS X
  23. # safemode - remove the submenu option to boot Mac OS X in "safe mode"
  24. # hwtest - the submenu option to run Apple's hardware test
  25. # arrows - scroll arrows on the OS selection tag line
  26. # hints - brief command summary in the menu
  27. # editor - the options editor (+, F2, or Insert on boot options menu)
  28. # all - all of the above
  29. # Default is none of these (all elements active)
  30. #
  31. #hideui singleuser
  32. #hideui all
  33.  
  34. # Set the name of a subdirectory in which icons are stored. Icons must
  35. # have the same names they have in the standard directory. The directory
  36. # name is specified relative to the main rEFInd binary's directory. If
  37. # an icon can't be found in the specified directory, an attempt is made
  38. # to load it from the default directory; thus, you can replace just some
  39. # icons in your own directory and rely on the default for others.
  40. # Default is "icons".
  41. #
  42. #icons_dir myicons
  43.  
  44. # Use a custom title banner instead of the rEFInd icon and name. The file
  45. # path is relative to the directory where refind.efi is located. The color
  46. # in the top left corner of the image is used as the background color
  47. # for the menu screens. Currently uncompressed BMP images with color
  48. # depths of 24, 8, 4 or 1 bits are supported, as well as PNG images.
  49. #
  50. #banner hostname.bmp
  51. #banner mybanner.png
  52.  
  53. # Custom images for the selection background. There is a big one (144 x 144)
  54. # for the OS icons, and a small one (64 x 64) for the function icons in the
  55. # second row. If only a small image is given, that one is also used for
  56. # the big icons by stretching it in the middle. If only a big one is given,
  57. # the built-in default will be used for the small icons.
  58. #
  59. # Like the banner option above, these options take a filename of an
  60. # uncompressed BMP image file with a color depth of 24, 8, 4, or 1 bits,
  61. # or a PNG image. The PNG format is required if you need transparency
  62. # support (to let you "see through" to a full-screen banner).
  63. #
  64. #selection_big selection-big.bmp
  65. #selection_small selection-small.bmp
  66.  
  67. # Set the font to be used for all textual displays in graphics mode.
  68. # The font must be a PNG file with alpha channel transparency. It must
  69. # contain ASCII characters 32-126 (space through tilde), inclusive, plus
  70. # a glyph to be displayed in place of characters outside of this range,
  71. # for a total of 96 glyphs. Only monospaced fonts are supported. Fonts
  72. # may be of any size, although large fonts can produce display
  73. # irregularities.
  74. # The default is rEFInd's built-in font, Luxi Mono Regular 12 point.
  75. #
  76. #font myfont.png
  77.  
  78. # Use text mode only. When enabled, this option forces rEFInd into text mode.
  79. # Passing this option a "0" value causes graphics mode to be used. Pasing
  80. # it no value or any non-0 value causes text mode to be used.
  81. # Default is to use graphics mode.
  82. #
  83. #textonly
  84.  
  85. # Set the EFI text mode to be used for textual displays. This option
  86. # takes a single digit that refers to a mode number. Mode 0 is normally
  87. # 80x25, 1 is sometimes 80x50, and higher numbers are system-specific
  88. # modes. Mode 1024 is a special code that tells rEFInd to not set the
  89. # text mode; it uses whatever was in use when the program was launched.
  90. # If you specify an invalid mode, rEFInd pauses during boot to inform
  91. # you of valid modes.
  92. # CAUTION: On VirtualBox, and perhaps on some real computers, specifying
  93. # a text mode and uncommenting the "textonly" option while NOT specifying
  94. # a resolution can result in an unusable display in the booted OS.
  95. # Default is 1024 (no change)
  96. #
  97. #textmode 2
  98.  
  99. # Set the screen's video resolution. Pass this option either:
  100. # * two values, corresponding to the X and Y resolutions
  101. # * one value, corresponding to a GOP (UEFI) video mode
  102. # Note that not all resolutions are supported. On UEFI systems, passing
  103. # an incorrect value results in a message being shown on the screen to
  104. # that effect, along with a list of supported modes. On EFI 1.x systems
  105. # (e.g., Macintoshes), setting an incorrect mode silently fails. On both
  106. # types of systems, setting an incorrect resolution results in the default
  107. # resolution being used. A resolution of 1024x768 usually works, but higher
  108. # values often don't.
  109. # Default is "0 0" (use the system default resolution, usually 800x600).
  110. #
  111. #resolution 1024 768
  112. #resolution 3
  113.  
  114. # Launch specified OSes in graphics mode. By default, rEFInd switches
  115. # to text mode and displays basic pre-launch information when launching
  116. # all OSes except OS X. Using graphics mode can produce a more seamless
  117. # transition, but displays no information, which can make matters
  118. # difficult if you must debug a problem. Also, on at least one known
  119. # computer, using graphics mode prevents a crash when using the Linux
  120. # kernel's EFI stub loader. You can specify an empty list to boot all
  121. # OSes in text mode.
  122. # Valid options:
  123. # osx - Mac OS X
  124. # linux - A Linux kernel with EFI stub loader
  125. # elilo - The ELILO boot loader
  126. # grub - The GRUB (Legacy or 2) boot loader
  127. # windows - Microsoft Windows
  128. # Default value: osx
  129. #
  130. #use_graphics_for osx,linux
  131.  
  132. # Which non-bootloader tools to show on the tools line, and in what
  133. # order to display them:
  134. # shell - the EFI shell (requires external program; see rEFInd
  135. # documentation for details)
  136. # gptsync - the (dangerous) gptsync.efi utility (requires external
  137. # program; see rEFInd documentation for details)
  138. # apple_recovery - boots the Apple Recovery HD partition, if present
  139. # mok_tool - makes available the Machine Owner Key (MOK) maintenance
  140. # tool, MokManager.efi, used on Secure Boot systems
  141. # about - an "about this program" option
  142. # exit - a tag to exit from rEFInd
  143. # shutdown - shuts down the computer (a bug causes this to reboot
  144. # EFI systems)
  145. # reboot - a tag to reboot the computer
  146. # firmware - a tag to reboot the computer into the firmware's
  147. # user interface (ignored on older computers)
  148. # Default is shell,apple_recovery,mok_tool,about,shutdown,reboot,firmware
  149. #
  150. #showtools shell, mok_tool, about, reboot, exit, firmware
  151.  
  152. # Directories in which to search for EFI drivers. These drivers can
  153. # provide filesystem support, give access to hard disks on plug-in
  154. # controllers, etc. In most cases none are needed, but if you add
  155. # EFI drivers and you want rEFInd to automatically load them, you
  156. # should specify one or more paths here. rEFInd always scans the
  157. # "drivers" and "drivers_{arch}" subdirectories of its own installation
  158. # directory (where "{arch}" is your architecture code); this option
  159. # specifies ADDITIONAL directories to scan.
  160. # Default is to scan no additional directories for EFI drivers
  161. #
  162. #scan_driver_dirs EFI/tools/drivers,drivers
  163.  
  164. # Which types of boot loaders to search, and in what order to display them:
  165. # internal - internal EFI disk-based boot loaders
  166. # external - external EFI disk-based boot loaders
  167. # optical - EFI optical discs (CD, DVD, etc.)
  168. # hdbios - BIOS disk-based boot loaders
  169. # biosexternal - BIOS external boot loaders (USB, eSATA, etc.)
  170. # cd - BIOS optical-disc boot loaders
  171. # manual - use stanzas later in this configuration file
  172. # Note that the legacy BIOS options require firmware support, which is
  173. # not present on all computers.
  174. # On UEFI PCs, default is internal,external,optical,manual
  175. # On Macs, default is internal,hdbios,external,biosexternal,optical,cd,manual
  176. #
  177. #scanfor internal,external,optical,manual
  178.  
  179. # Delay for the specified number of seconds before scanning disks.
  180. # This can help some users who find that some of their disks
  181. # (usually external or optical discs) aren't detected initially,
  182. # but are detected after pressing Esc.
  183. # The default is 0.
  184. #
  185. #scan_delay 5
  186.  
  187. # When scanning volumes for EFI boot loaders, rEFInd always looks for
  188. # Mac OS X's and Microsoft Windows' boot loaders in their normal locations,
  189. # and scans the root directory and every subdirectory of the /EFI directory
  190. # for additional boot loaders, but it doesn't recurse into these directories.
  191. # The also_scan_dirs token adds more directories to the scan list.
  192. # Directories are specified relative to the volume's root directory. This
  193. # option applies to ALL the volumes that rEFInd scans UNLESS you include
  194. # a volume name and colon before the directory name, as in "myvol:/somedir"
  195. # to scan the somedir directory only on the filesystem named myvol. If a
  196. # specified directory doesn't exist, it's ignored (no error condition
  197. # results). The default is to scan the "boot" directory in addition to
  198. # various hard-coded directories.
  199. #
  200. #also_scan_dirs boot,ESP2:EFI/linux/kernels
  201.  
  202. # Partitions to omit from scans. You must specify a volume by its
  203. # label, which you can obtain in an EFI shell by typing "vol", from
  204. # Linux by typing "blkid /dev/{devicename}", or by examining the
  205. # disk's label in various OSes' file browsers.
  206. # The default is "Recovery HD".
  207. #
  208. #dont_scan_volumes "Recovery HD"
  209.  
  210. # Directories that should NOT be scanned for boot loaders. By default,
  211. # rEFInd doesn't scan its own directory or the EFI/tools directory.
  212. # You can "blacklist" additional directories with this option, which
  213. # takes a list of directory names as options. You might do this to
  214. # keep EFI/boot/bootx64.efi out of the menu if that's a duplicate of
  215. # another boot loader or to exclude a directory that holds drivers
  216. # or non-bootloader utilities provided by a hardware manufacturer. If
  217. # a directory is listed both here and in also_scan_dirs, dont_scan_dirs
  218. # takes precedence. Note that this blacklist applies to ALL the
  219. # filesystems that rEFInd scans, not just the ESP, unless you precede
  220. # the directory name by a filesystem name, as in "myvol:EFI/somedir"
  221. # to exclude EFI/somedir from the scan on the myvol volume but not on
  222. # other volumes.
  223. #
  224. #dont_scan_dirs ESP:/EFI/boot,EFI/Dell
  225.  
  226. # Files that should NOT be included as EFI boot loaders (on the
  227. # first line of the display). If you're using a boot loader that
  228. # relies on support programs or drivers that are installed alongside
  229. # the main binary or if you want to "blacklist" certain loaders by
  230. # name rather than location, use this option. Note that this will
  231. # NOT prevent certain binaries from showing up in the second-row
  232. # set of tools. Most notably, MokManager.efi is in this blacklist,
  233. # but will show up as a tool if present in certain directories. You
  234. # can control the tools row with the showtools token.
  235. # The default is shim.efi,TextMode.efi,ebounce.efi,GraphicsConsole.efi,MokManager.efi,HashTool.efi,HashTool-signed.efi
  236. #
  237. #dont_scan_files shim.efi,MokManager.efi
  238.  
  239. # Scan for Linux kernels that lack a ".efi" filename extension. This is
  240. # useful for better integration with Linux distributions that provide
  241. # kernels with EFI stub loaders but that don't give those kernels filenames
  242. # that end in ".efi", particularly if the kernels are stored on a
  243. # filesystem that the EFI can read. When uncommented, this option causes
  244. # all files in scanned directories with names that begin with "vmlinuz"
  245. # or "bzImage" to be included as loaders, even if they lack ".efi"
  246. # extensions. The drawback to this option is that it can pick up kernels
  247. # that lack EFI stub loader support and other files. Passing this option
  248. # a "0" value causes kernels without ".efi" extensions to NOT be scanned;
  249. # passing it alone or with any other value causes all kernels to be scanned.
  250. # Default is to NOT scan for kernels without ".efi" extensions.
  251. #
  252. scan_all_linux_kernels
  253.  
  254. # Set the maximum number of tags that can be displayed on the screen at
  255. # any time. If more loaders are discovered than this value, rEFInd shows
  256. # a subset in a scrolling list. If this value is set too high for the
  257. # screen to handle, it's reduced to the value that the screen can manage.
  258. # If this value is set to 0 (the default), it's adjusted to the number
  259. # that the screen can handle.
  260. #
  261. #max_tags 0
  262.  
  263. # Set the default menu selection. The available arguments match the
  264. # keyboard accelerators available within rEFInd. You may select the
  265. # default loader using:
  266. # - A digit between 1 and 9, in which case the Nth loader in the menu
  267. # will be the default.
  268. # - Any substring that corresponds to a portion of the loader's title
  269. # (usually the OS's name or boot loader's path).
  270. #
  271. #default_selection 1
  272.  
  273. # Include a secondary configuration file within this one. This secondary
  274. # file is loaded as if its options appeared at the point of the "include"
  275. # token itself, so if you want to override a setting in the main file,
  276. # the secondary file must be referenced AFTER the setting you want to
  277. # override. Note that the secondary file may NOT load a tertiary file.
  278. #
  279. #include manual.conf
  280.  
  281. # Sample manual configuration stanzas. Each begins with the "menuentry"
  282. # keyword followed by a name that's to appear in the menu (use quotes
  283. # if you want the name to contain a space) and an open curly brace
  284. # ("{"). Each entry ends with a close curly brace ("}"). Common
  285. # keywords within each stanza include:
  286. #
  287. # volume - identifies the filesystem from which subsequent files
  288. # are loaded. You can specify the volume by label or by
  289. # a number followed by a colon (as in "0:" for the first
  290. # filesystem or "1:" for the second).
  291. # loader - identifies the boot loader file
  292. # initrd - Specifies an initial RAM disk file
  293. # icon - specifies a custom boot loader icon
  294. # ostype - OS type code to determine boot options available by
  295. # pressing Insert. Valid values are "MacOS", "Linux",
  296. # "Windows", and "XOM". Case-sensitive.
  297. # graphics - set to "on" to enable graphics-mode boot (useful
  298. # mainly for MacOS) or "off" for text-mode boot.
  299. # Default is auto-detected from loader filename.
  300. # options - sets options to be passed to the boot loader; use
  301. # quotes if more than one option should be passed or
  302. # if any options use characters that might be changed
  303. # by rEFInd parsing procedures (=, /, #, or tab).
  304. # disabled - use alone or set to "yes" to disable this entry.
  305. #
  306. # Note that you can use either DOS/Windows/EFI-style backslashes (\)
  307. # or Unix-style forward slashes (/) as directory separators. Either
  308. # way, all file references are on the ESP from which rEFInd was
  309. # launched.
  310. # Use of quotes around parameters causes them to be interpreted as
  311. # one keyword, and for parsing of special characters (spaces, =, /,
  312. # and #) to be disabled. This is useful mainly with the "options"
  313. # keyword. Use of quotes around parameters that specify filenames is
  314. # permissible, but you must then use backslashes instead of slashes,
  315. # except when you must pass a forward slash to the loader, as when
  316. # passing a root= option to a Linux kernel.
  317.  
  318. # Below are several sample boot stanzas. All are disabled by default.
  319. # Find one similar to what you need, copy it, remove the "disabled" line,
  320. # and adjust the entries to suit your needs.
  321.  
  322. # A sample entry for a Linux 3.3 kernel with its new EFI boot stub
  323. # support on a filesystem called "KERNELS". This entry includes
  324. # Linux-specific boot options and specification of an initial RAM disk.
  325. # Note uses of Linux-style forward slashes, even in the initrd
  326. # specification. Also note that a leading slash is optional in file
  327. # specifications.
  328. menuentry Linux {
  329. icon EFI/refind/icons/os_linux.icns
  330. volume KERNELS
  331. loader bzImage-3.3.0-rc7
  332. initrd initrd-3.3.0.img
  333. options "ro root=UUID=5f96cafa-e0a7-4057-b18f-fa709db5b837"
  334. disabled
  335. }
  336.  
  337. # A sample entry for loading Ubuntu using its standard name for
  338. # its GRUB 2 boot loader. Note uses of Linux-style forward slashes
  339. menuentry Ubuntu {
  340. loader /EFI/ubuntu/grubx64.efi
  341. icon /EFI/refined/icons/os_linux.icns
  342. disabled
  343. }
  344.  
  345. # A minimal ELILO entry, which probably offers nothing that
  346. # auto-detection can't accomplish.
  347. menuentry "ELILO" {
  348. loader \EFI\elilo\elilo.efi
  349. disabled
  350. }
  351.  
  352. # Like the ELILO entry, this one offers nothing that auto-detection
  353. # can't do; but you might use it if you want to disable auto-detection
  354. # but still boot Windows....
  355. menuentry "Windows 7" {
  356. loader \EFI\Microsoft\Boot\bootmgfw.efi
  357. disabled
  358. }
  359.  
  360. # EFI shells are programs just like boot loaders, and can be
  361. # launched in the same way. You can pass a shell the name of a
  362. # script that it's to run on the "options" line. The script
  363. # could initialize hardware and then launch an OS, or it could
  364. # do something entirely different.
  365. menuentry "Windows via shell script" {
  366. icon \EFI\refind\icons\os_win.icns
  367. loader \EFI\tools\shell.efi
  368. options "fs0:\EFI\tools\launch_windows.nsh"
  369. disabled
  370. }
  371.  
  372. # Mac OS is normally detected and run automatically; however,
  373. # if you want to do something unusual, a manual boot stanza may
  374. # be the way to do it. This one does nothing very unusual, but
  375. # it may serve as a starting point. Note that you'll almost
  376. # certainly need to change the "volume" line for this example
  377. # to work.
  378. menuentry "My Mac OS X" {
  379. icon \EFI\refind\icons\os_mac.icns
  380. volume "OS X boot"
  381. loader \System\Library\CoreServices\boot.efi
  382. disabled
  383. }
Advertisement
Add Comment
Please, Sign In to add comment