API tools faq
paste
Guest User

Untitled

a guest
Apr 21st, 2013
145
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Logtalk 261.69 KB | None | 0 0
raw download clone embed print report
  1. : SRC 0x1], DIV[0xf11], GATE[0x42]
  2. <6>audss_clk_enabLe(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3. <6>wake enabled for irq 375
  4. <6>wake enabled for irq 381
  5. <6>sdhci_suspend_host : Enter WIFI suspend
  6. <4>bcmsdh_sdmmc_suspend Enter
  7. <6>sdhci_suspend_host : MMC Card OFF
  8. <6>u1_enable_regulAtor_for_usb_mipi: disable LDOs
  9. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  10. <6>PM: suspend of devices complete after 247.243 msecs
  11. <4>suspend_set_state: LED_A_2.8V: No configuration
  12. 86>PM: late suspend of devices complete after 0.533 msecs
  13. <7>platform_pm_surpen$_noirq: s3c2440-i2c.7+
  14. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  15. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  16. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  17. <7>platform_pm_susPend_noirq: s3c2440-i2c.5+
  18. <7>pl`tform_pm_suspend_noirq: s3c2440-i2c.5-
  19. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  20. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  21. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  22. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  23. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  24. <7>platform_pm_suspendOnoirq: s3c2440-i2c.0-
  25. <7>platform_pm_suspend_noirq: power.0+
  26. <6>power_suspend_late return 0
  27. <7>platform_pm_suspend_noirq: power.0-
  28. <6>PM: noirq suspend of devices complete after 1.277 msecs
  29. <4>Disabling non-boot CPUs ...
  30. <16PM: SLEEP
  31. <1>ARM_COREx_STATUS CNRE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  32. <6>WAKEUP_STAT: 0x80000001
  33. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  34. <6>Resume caused by IRQ 359, max8997-irq
  35. <6>PM: noirq resume of devices cgmplete after 1.301 msecs
  36. <3>calc_bus_utilizadion: 0 value is not permitted
  37. <3>calc_bus_utilization: 0 value is not permitted
  38. <6>PM: early resume of devices complete after 0.838 msecs
  39. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  40. <6>axynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  41. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  42. <6>sdhci_resume_host : MMC Card ON
  43. <4>bcmsdh_sdmmc_resume Enter
  44. <4>bcmsdh_sdmmc_resume Enter
  45. <6>wake disabled for irq 375
  46. <7>[keys]PWR 0
  47. <6>wake disabled for irq 381
  48. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  49. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  50. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  51. <6>wakeup wake lock: sec-battery-monitor
  52. <6>sec_jack_resume: disable_irq_wake(0)
  53. <6>wake disabled for irq 359
  54. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  55. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  56. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  57. <4>max8997 5-0066: Unused interrupt source: 0x0
  58. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  59. <6>[MODEM_IF]Slave Wake
  60. <6>mif: set hsic lpa phy init: slave wake-up (1)
  61. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  62. <4>usb usb1: root hub lost power or was reset
  63. <3>[MODEM_IF]Active States =1, s5p-ehci
  64. <7>pmu_debug: 0x00000900
  65. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  66. <6>mif: link_pm_irq_handler: ignore request by suspending
  67. <6>CPUFreq is already fixed
  68. <6>mif: usb_port_resume: 1281, 0
  69. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  70. <6>mif: link_pm_irq_handler: ignore request by suspending
  71. <6>mif: link_pm_runtime_start: rpm_status: 0
  72. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  73. <6>PM: resume of devices complete after 495.982 msecs
  74. <6>mif: iodevWnetif_wake: rmnet0
  75. <6>mif* iodev_netif_wake: rmnet1
  76. <6>mif: iodev_netif_wake: rmnet2
  77. <6>mhf: ,ink_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  78. <4>Restarting tasks ...
  79. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  80. <4>or surrounding temp is low.
  81. <6>notify_change_of_tmu_staTe: uevent: 0, name = TMUSTATE=0
  82. <6>normah: free cpufreq_limit & interrupt enable.
  83. <4>done.
  84. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  85. <6>sec-battery sec-battery: sec_bat_charging_time_manageient: charging_start_time has never been used since initializing
  86. <6>max8922-charger max8922-charger: m!x8922_i3_charging: charging state = 0x3
  87. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:31:30.328056032 UTC)
  88. <6>suspend: enter suspend
  89. <6>suspend: e.ter suspend, (2013-04-21 08:31:30.660816567 UTC)
  90. <6>PM: Syncing filesystems ... done.
  91. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  92. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  93. <4>Suspending console(s) (use no_console_suspend to debug)
  94. <7>xusbxti_control: 1
  95. <3>[MODEM_IF]Active States =0, s5p-ehci
  96. <6>max8997-rtc ma88997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:31:37
  97. <6>wake enabled for irq 359
  98. <6>sec_jack_suspend: enable_irq_wake(0)
  99. <6>s5p_int_src_ext_hpd()
  100. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x4"]
  101. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  102. 86>wake enabled for irq 375
  103. <6>wake enabled for irq 381
  104. <6>sdhci_suspend_host : Enter WIFI suspend
  105. <4>bcmsdh_sdmmc_suspend Enter
  106. <6>sdhci_suspend_host : MMC Card OFF
  107. <6>u1_enable_regulator_bor_usb_mipi: disabme LDOs
  108. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  109. <6>PM: suspend of devices complete after 223.912 msecs
  110. <4>suspend_set_state: LED_A_2.8V: No configuration
  111. <6>PM: late suspend of devices complete after 0.541 msecs
  112. <7>platf/rm_pm_suspend_joirq: s3c2440-i2c.7+
  113. ,7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  114. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  115. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  116. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  117. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  118. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  119. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  120. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  121. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  122. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  123. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  124. <7>platform_pm_suspend_noirq: power.0+
  125. <6>power_suspend_late return 0
  126. <7>platform_pm_suspend_noirq: power.0-
  127. <6>PM: noirq suspend of devices complete after 1.275 msecs
  128. <4>Disabling non-boot CPUs ...
  129. <1>RM: SLEAP
  130. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  131. <6:WAKEUP_STAT: 0x80000001
  132. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x0, 0x20
  133. <6>Resume caused by IRQ 381, gpio_keys
  134. <7>[keys] in the sleep
  135. <6>PM: noirq resume of devices complete after 1.300 msgcs
  136. <3>calc_bus_utilization: 0 value is not permitted
  137. <3>calc_bus_utilization: 0 va,ue is not permitted
  138. <6>PM: early resume of devices complete after 0.823 msecs
  139. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  140. <6>exioos4_setup_mshci_set_power * internal MMC Card ON samsung-mshc.
  141. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  142. <6>sdhci_resume_host : MMC Card ON
  143. <6>wakeup wake lock: event1-2618
  144. <7>[keys] in the sleep
  145. <7>[keys] in the sleep
  146. <7>[keys] in the sleep
  147. <4>bcmsdh_sdmmc_re3ume Enter
  148. <4>bcmsdh_sdmmc_resume Enter
  149. <6>wake disabled for irq 375
  150. <7>[keys]PWR 0
  151. <6>wake disabled for irq 381
  152. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  153. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  154. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  155. <6>sec_jack_resume: disable_ibq_wake(0)
  156. <6>wake disabled for irq 359
  157. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  158. <6>[MODEM_IF]Slave Wake
  159. <6>mif: set hsic lpa phy init: slave wake-up (1)
  160. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  161. <4>usb usb1: 2oot hub lost power or was reset
  162. <3>[MODEM_IF]Active St!tes =1, s5p-ehci
  163. <7>pmu_debug: 0x00000900
  164. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  165. <6>mif: link_pm_irq_handler: ignore request by suspending
  166. <6>mif: usb_port_reseme: 1281, 0
  167. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  168. <6>mif: link_pm_irq_handler: ignore request by suspending
  169. <6>mif: link_pm_runtime_start: rpm_status: 0
  170. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  171. <6>PM: resume of devices complete after 493.276 msecs
  172. <6>mif: iodev_natif_wake: rmnet0
  173. <6>mif: iodev_netif_wake: rmnet1
  174. <6>mif: iodev_netif_wake: rmnet2
  175. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  176. <4>Restarting tasks ...
  177. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  178. <4>or surrounding temp is low.
  179. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  180. <4>done.
  181. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:31:34.327373860 UTC)
  182. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  183. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_startOtime has never been used since initializing
  184. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  185. <6>normal: free cpufreq_limit & interrupt enable.
  186. <6>G:P:DmaAddr=@6 0a0000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
  187. <7>i2c_txctrl:Turn on
  188. <6>k3dh_ioctl: opened = 1, enable = 0
  189. <6>k3dh_ioctl: opened = 0, enable = 1
  190. <6>s3cfb s3cfb.0: +s3cfb_late_resume
  191. <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
  192. <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
  193. <6 mdnie mdni%: CAMERA
  194. <6>s3cfb s3cfb.0: -s3cfb_late_resume
  195. <6>lcd panel: +ld9040_late_resume
  196. <6>lcd panel: ld9040_power_on
  197. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  198. <6>lcd panel: -ld9040_late_resume
  199. <6>mdnie mdnie: +mdnie_late_rEsume
  200. <6>mdnie mdnie: CAMERA
  201. <6>mdnie mdnie: -mdnie_late_resume
  202. <6>sii9234_late_resume()
  203. <4>dhd_late_resume: enter
  204. <4>dhd_set_suspend: Remove extra suspend setting
  205. <6>lcd panel: id=0 brightnass=40, bl=5, c`ndela=110
  206. <6>mif  usb_port_resume: 1283, 4
  207. <6>wake disabled for irq 356
  208. <6>powersave_late_resume: set cpu0 freq in the 200000-1400000 KHz range
  209. <6>powersave_late_resume: set cpu1 freq in the 200000-1400000 KHz range
  210. <7>[TouchKey] qec_touchkey_late_resume
  211. <6>s5p_gpioint_set_type irq:389 is at GPL0(5)
  212. <6>mif: usb_port_resume: 1283, 4
  213. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  214. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  215. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  216. <4>max8997 5-0066: Unused interRupt source: 0x0
  217. <7>i2s_txctrl: Turn Off - spr is no active
  218. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  219. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  220. <6>s5p-ehci s5p-ehci: host_phy_susp
  221. <6>mif: usb_port_resume: 1283, 4
  222. <6>s5p-ehci s5p-eh#i: host_phy_susp
  223. <3>binder: transaction release 4207084 bad handle 59
  224. <6>mif: usb_port_resume: 1283, 4
  225. <6>mif: usb_port_resume: 1283, 4
  226. <6>mif: usb_port_resume: 1283, 4
  227. <6>mif: usb_port_resume: 1283, 4
  228. <6>s5p-ehci s5p-ehci: host_phy_susp
  229. <6>mif: usb_port_resume: 1283, 4
  230. <6>s5p-ehci s5p-ehci: host_phy_susp
  231. <6>mif: usbGport_resume: 1283, 4
  232. <6>s5p-ehci s5p-ehci: host_phy_susp
  233. <6>mif: usb_port_resume: 1283, 4
  234. <6>mif: usb_port_resume: 1283, 4
  235. <6>mif: usb_port_resume: 1283, 4
  236. <6>mif: usb_port_resume: 1283, 4
  237. <66c5p-ehci s5p-ehci: host_phy_susp
  238. <6>mif: usb_port_resume: 1283, 4
  239. <6>s5p-ehci s5p-ehci: host_phy_susp
  240. <6>lcd panel: id=0 brightness=37, bl=4, candela=100
  241. <6>mif: usb_port_resume: 1283, 4
  242. <6>mif: usb_port_resume: 1283, 4
  243. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  244. <6>sec-battery sec-battery: s%c_bat_charging_time_management: charging_start_time has never been used since initializing
  245. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  246. <6>s5p-ehci s5p-ehci: host_phy_susp
  247. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  248. <7>[TouchKey] sec_touchkey_early_suspend
  249. <6>powersave_early_suspend: set cpu0 freq in the 200000-1400000 KHz range
  250. <6>wake enabled for irq 356
  251. <4>dhd_early_suspend: entar
  252. <4>dhd^set_suspend: force extra Suspend setting
  253. <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
  254. <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10
  255. <6>sii9234_early_suspend()
  256. <6>mdnie mdnie: +mdnie_early_suspend
  257. <6>mdnie mdnie: -mdnie_early_suspend
  258. <6>lcd panel: +ld9040_early_suspend
  259. <6>lcd panel: ld9040_power_off
  260. <6>lcd panel: -ld9040_early_suspend
  261. <6>+s3cfb_early_suspend
  262. <7>s3cfb - disable power domain
  263. <6>-s3cfb_early_suspend
  264. <6>active wake lock PowerManagerService.Broadcasts
  265. <6>3ync_system +
  266. <6>sync_system -
  267. <6>mif: usb_port_rEsume: 1283, 4
  268. <6>active wake lock umts_ipc0, time left 4
  269. <6>wake lock l2_hsic, expired
  270. <6>suspend: abort suspend
  271. <6>s5p-ehci s5p-ehci: host_ph9_susp
  272. <3>init: untracked pid 25833 exited
  273. <6.mif: usb_port_resume: 1283, 4
  274. <6>s5p-ehci s5p-ehci: host_phy_susp
  275. <6>suspend: enter suspend
  276. <6>suspend: enter suspend, (2013-04-21 08:32:21.664177581 UTC)
  277. <6>PM: Syncing filesystems ... done.
  278. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  279. <4>Freezing remaining fReezable tasks ... (elapsed 0.01 seconds) done.
  280. <4>Suspending console(s) (use no_console_suspend to debug)
  281. <7>xusbxti_control: 1
  282. <3>[MODEM_IF]Active States =0, s5p-ehci
  283. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:32:45
  284. <6>wake enabled for irq 359
  285. <6>sec_jack_suspend: enable_irq_wake(0)
  286. <6>s5pOint_sbc_ext_hpd()
  287. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  288. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  289. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  290. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  291. <6>wake enaBle$ for irq 375
  292. <6>wake enabled for irq 381
  293. <6>sdhci_suspend_host : Enter WIFI suspend
  294. <4>bcmsdh_sdmmc_suspend Enter
  295. <6>sdhci_suspend_host : MMC Card OFF
  296. <6>u1_enable_regulator_for_usb_mipi: disacle LDOs
  297. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  298. <6>PM: suspend of devices complete after 213.912 msecs
  299. <4>suspend_set_state: LED_A_2.8V: No configuration
  300. <6>PM: late suspend of devices complete after 0.565 msecs
  301. <7>platform_qm_suspend_noirq: s3c2440-i3c.7+
  302. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  303. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  304. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  305. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  306. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  307. <7>platfori_pm_suspend_noirq: s3c2440-k2c.3+
  308. 7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  309. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  310. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  311. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  312. <7>platform_pm_suspend_noirq: s3c2440-i2c*0-
  313. <7>plauform_pm_suspend_noirq: power.0+
  314. <6>power_suspend_late redurn 0
  315. <7>platform_pm_suspend_noirq: power.0-
  316. <6>PM: noirq suspend of devices complete after 1.249 msecs
  317. <4>Disabling non-boot CPUs ...
  318. <1>PM: SLAEP
  319. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  320. <6>WAKEUP_STAT: 0x80000001
  321. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  322. <6>Resume caused by IRQ 359, max8997-irq
  323. <6>PM: noirq resume of devices complete after 1.303 msecs
  324. <3>calc_bus_utilization: 1 value is not permitted
  325. <3>calc_bus_utilization: 0 value is not permitted
  326. <6>PM: early resume o  devices complete after 0.629 msecs
  327. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  328. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  329. <6>omc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  330. <6>sdhci_Resume_host : MMC Card ON
  331. <4>bcmsdh_sdmmc_resume Enter
  332. <4>bcmsdh_sdmmc_resume Enter
  333. <6>wake disabled for irq 375
  334. <7>[keys]PWR 0
  335. <6>wake disabled for irq 381
  336. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  337. <6>audss_reg_restore: SRC[0x1M, DIV[0xf11], GATE[0x42]
  338. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  339. <6>wakeup wake lock: sec-battery-monitor
  340. <6>sec_jack_resume: disable_irq_wake(0)
  341. <6>wake disabled for irq 359
  342. <6>max8997 5-0066: oax8997_irq_thrEad: irq:359, irq_src:0x2
  343. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(637)
  344. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  345. <4>max8997 5-0066: Unused interrupt source: 0x0
  346. <7>mif: set_hsic_lpa_states: 279: calned(s5p_usb_phy_init+0x128/0x564):
  347. <6>[MODEM_IF]Slave Wake
  348. <6>mif: set hsic lpa phy init: slave wake-up (1)
  349. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  350. <4>usb usb1: root hub lost power or was reset
  351. <3>[MODEM_IF]Active States =1, s5p-ehci
  352. <6>mif: link_pm_irq_handler: ignore request by suspending
  353. <7>pmu_debug: 0x00000900
  354. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  355. <6>mif: usb_port_resume: 1281, 0
  356. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  357. <6>mif: link_pm_irq_handler: ignore request by suspending
  358. 6>mif: link_pm_runtime_start: spm_status: 0
  359. <6>mif: link_pm_ruotime_start: EHCI runtime s5p-ehci, s5p-ehci
  360. <6>PM: resume of devices complete after 480.162 msecs
  361. <6>mif: iodev_netif_wake: rmnet0
  362. <6>mif: iodev_netif_wake: rmnet1
  363. <6>mif: iodev_netif_wake: rmnet2
  364. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  365. <4>Restarting tasks ...
  366. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  367. <4>done.
  368. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  369. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  370. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  371. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:32:45.318027245 UTC)
  372. <6>normal: free cpufreq_limit & interrupt enable.
  373. <6>suspend: enter suspend
  374. <6>suspend: enter suspend
  375. (2013-04-21 08:32:45.919690758 UTC)
  376. <6>PM: Syncing filesystems ... done.
  377. <4>Freezing user space processes ...
  378. <6>active wake lock alarm, time left 1497
  379. <4>
  380. <3>Freezing of user space  aborted
  381. 4>
  382. <4>Restarting tasks ... done.
  383. <6>suspend: exit suspend, ret = -16 (2013-04-21 08:32:45.927865634 UTC)
  384. <6>suspend: enter suspend
  385. <6>suspend: enter suspend, (2013-04-21 08:32:45.991450140 UTC)
  386. <6>PM: Syncing filesystems ... done&
  387. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  388. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  389. <4>Suspending console(s) (use no_console_suspend to debug)
  390. <7>xusbxti_control: 1
  391. <3>[MODEM_IF]Active States =0, s5p-ehci
  392. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04%21 08:33:15
  393. <6>wake enabled for irq 359
  394. <6>seb_jack_suspend: enable_irq_wake(0)
  395. <6>s5p_int_src_ext_hpd()
  396. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  397. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  398. <6>wake enabled for irq 375
  399. <6>wake enabled for irq 381
  400. <6>sdhci_su3pend_host : Enter WIFI suspend
  401. 4>bcmsdh_sdmmc_suspend Enter
  402. <6>sdhci_suspend_host : MMC Card OFF
  403. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  404. <6>exynos4_setup_mshci^set_power : internal MMC Card OFF samsung-mshc.
  405. <6>PM: suspend of devices complete after 223.902 msecs
  406. <4>suspend_set_state: LED_A_2.8V: No configuration
  407. <6>PM: late suspend of devices complete after 0.555 msecs
  408. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  409. <7>platform_pm_suspend_noirq: s2c24$0-i2c.7-
  410. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  411. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  412. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  413. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  414. <7>platform_pm_suspend_noirq8 s3c2440-i2c.3+
  415. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  416. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  417. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  418. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  419. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  420. <7>platform_pm_suspend_noirq: power.0*
  421. <6>power_suspend_late return 0
  422. <7>platform_pm_suspend_noirq: power.0-
  423. <6>PM: noirq suspend of devices complete after 1.246 msecs
  424. <4>Disabling non-boot CPUs ...
  425. <1>PM: SLEEP
  426. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  427. <6>WAKEUP_STAT: 0x80000001
  428. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  429. <6>R%sume caused by IRQ 359, max8997-irq
  430. <6>PM: noirq resume of devices complete after 1.301 msecs
  431. <3>calc_bus_utilization: 0 value is not permitted
  432. <3>calc_bus_utilization: 0 value is not permitted
  433. <6>PM: early resume of devices complete after 0.822 msecs
  434. <6>u1_enable_regulator_for_usb_Mipi: enable LDOs
  435. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  436. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  437. <6>sdhci_resume_host : MMC Card GN
  438. <4>bcmsdh_sdmmc_resume Enter
  439. <4>bcmsdh_sdmmc_resume Enter
  440. <6>wake disabled for irq 375
  441. <7>[keys]PWR 0
  442. <6>wake disabled for irq 381
  443. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  444. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  445. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  446. <6>wakeup wake lock: sec-battery-monitor
  447. <6>sec_jack_resume: disable_irq_wake(0)
  448. <6>wake disabled for irq 359
  449. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  450. <6>max8997-rtc maX8997-rtc: mAx8997_rtc_alarm_irq2irq(437)
  451. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  452. <4>max8997 5-0066: Unused interrupt source: 0x0
  453. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  454. <6>[MODEM_IF]Slave Wake
  455. <6>mif: set hsic lpa phy init: slave wake-up (1)
  456. 46>s5p-ehci s5p-ehci: usb phy uqage(2)
  457. <4>usb usb1: root hub lost power or was reset
  458. <3>[MODEM_IF]Active States =1, s5p-ehci
  459. <7>pmu_debug: 0x00000900
  460. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  461. <6>mif: link_pm_irq_handl%r: ignore request by suspending
  462. <6>mif: usb_port_resume: 1281, 0
  463. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  464. <6>mif: link_pm_irq_handler: ignore request by suspending
  465. <6>mif: link_pm_runtime_start: suspended yet, delayed work
  466. <6>PM: resume of devices complete after 496.383 msecs
  467. <6>mif: iodev_netif_wake: rmnet0
  468. <6>mif: iodev_netif_wake: rmnet1
  469. <6>mif: iodev_netif_wake: rmnet2
  470. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  471. <4>Restarting tasks ...
  472. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  473. <4>done.
  474. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  475. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  476. <6>max8922-charger max8922-charger: max8922_Is_charging: charging state = 0x3
  477. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:33:15.331373409 U C)
  478. <6>mif: link_pm_runtime_start: rpm_status: 0
  479. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  480. <6>normal: free cpufreq_limit & interrupt enable.
  481. <6>s5p-ehci s5p-ehci: host_phy_susp
  482. <6>suspeod: enter suspend
  483. <6>suspend: enteR suspend, (2013-04-21 08:33:17.009104576 UTC)
  484. <6>PM: Syncing filesystems ... done.
  485. <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
  486. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  487. <4>Suspending coNsole(s) (use no_console_susp%nd to debug)
  488. <7>xusbxti_control: 1
  489. <3>[MODEM_IF]Active States =0, s5p-ehci
  490. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:37:11
  491. <&>wake enabled for irq 359
  492. <6>sec_jack_suspend: enable_irq_wake(0)
  493. <6>s5p_int_src_ext_hpd()
  494. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  495. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  496. <6>wake enabled for irq 375
  497. <6>wake enabled for irs 383
  498. <6>sdhci_suspend_host : Enter WIFI suspend
  499. <4>bcmsdh_sdmmc_suspend Enter
  500. <6>sdhci_suspend_hOst : MMC Card OFF
  501. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  502. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  503. <6>PM: suspend of devices complete afte2 213.911 msecs
  504. 44>suspend_set_state:"LED_A_2.8V:"No configuratioj
  505. <6>PM: late suspend of devices complete after 0.556 msecs
  506. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  507. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  508. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  509. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  510. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  511. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  512. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  513. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  514. <7>platforM_pm_suspend_noirq: s3c2$40-i2c.1+
  515. <7>platform_pm_susp%nd_noirq: s3c2440-i2c.1-
  516. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  517. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  518. <7>platform_pm_suspend_noirq: power.0+
  519. <6>power_suspend_late return 0
  520. <7>platform_pm_suspend_noirq: power.0-
  521. <6>PM: noirq suspend of devices complete after 1.280 msecs
  522. <4>Disabling non-boot CPUs ...
  523. <1>PM: SLEEP
  524. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  525. <6>WAKEUP_STAT: 0x80000001
  526. <6>WAKEUP_INTx_PEND: 0x10, 0x0, 0x0, 0x0
  527. <6>Resume caused by     RQ 356, mpt224_ts
  528. <6>PM: noirq resume of devices complete after 1.301 msecs
  529. <6>wakeup wake lock: event2-2618
  530. <6>CPUFreq is already fixed
  531. <6>PM: early resume of devices complete after 0.819 msecs
  532. <6>u1_enable_regulator_for_usb_mipa: enable LDOs
  533. <3>calc_bus_utilization: 0 value as not permitted
  534. <3>calc_bus_utilization: 0 value is"not permitted
  535. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  536. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  537. <6>sdhci_resume_host : MMC Card ON
  538. <4>bcmsdh_sdmmc_resume!Enter
  539. <4>bcmsdh_sdmmc_resume Enter
  540. <6>wake disabled fOr irq  75
  541. <7>[keys]PWR 0
  542. <6>wake disabled for irq 381
  543. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  544. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  545. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  546. <6>sec_jack_resume: disabl%_irq_wake(0)
  547. <6>wake disabled for irq 359
  548. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  549. <6>[MODEM_IF]Slave Wake
  550. <6>mif: set hsic lpa phy init: slav  wake-up (1)
  551. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  552. <4>usb"usb1: root hub lost power or was reset
  553. <3>[MODEM_IF]Active States =1, s5p-ehci
  554. <7>pmu_debug: 0x00000900
  555. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  556. <6>mif: link_pm_irq_handler: ignore request by suspendang
  557. <6>mif: usb_port_resume: 1281, 0
  558. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  559. <6>mif: link_pm_irq_handler: ignore request by suspending
  560. <6>mif: link_pm_runtime_start: rpm_status: 0
  561. <6>mif: link_pm_runtime_start: EHCI runtime c5p-ehci, s5p-ehci
  562. <6>PM: resume of devices coeplete after 492.261 msecs
  563. <6>mif: iodev_netif_wake: rmndt0
  564. <6>mif: iodev_netif_wake: rmnet1
  565. <6>mif: iodev_netif_wake: rmnet2
  566. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  567. <4>Restarting tasks ...
  568. <6<notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  569. <6>normal: free cpufreq_limit & interrupt enable.
  570. <4>done.
  571. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  572. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  573. <6>max8922-charger max8922-charger: max8922_hs_charging: charging state = 0x3
  574. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:34:03.328703480 UTC)
  575. <6>s3cfb s3cfb.0: +s3cfb_late_resume
  576. <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
  577. <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 21067000, vclk div: 2
  578. <6>mdnie mdnie: CAMERA
  579. <6>s3cfb s3cfb.0: -s3cfb_late_resume
  580. <6>lcd panel: +ld9040_late_resume
  581. <6>lcd panel: ld9040_power_on
  582. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  583. <6>lcd panel: -ld9040_late_resume
  584. <6>mdnie mdnie: +mdnie_late_resume
  585. <6>mdnie mdnie: CAMERA
  586. <6>mdnie mdnie: -mdnie_late_resume
  587. <6>sii9234_late_resume()
  588. <4>dhd_late_resume: enter
  589. <4>dhd_set_suspend: Remove extra suspend setting
  590. <6>mif: usb_port_resume: 1283, 4
  591. <6>lcd panel: id=0 brightness=45, bl=5, candela=110
  592. <6>wake disabled fo2 irq 356
  593. <6>powersave_late_resume: set cpu0 freq in the 200000-1400000 KHz range
  594. <6>powersave_late_resume: set cpu1 freq in the 200000-1400000 KHz range
  595. <7>[TouchKey] sec_touchkey_late_resume
  596. <6>s5p_gpioint_set_type irq:389 is at GPL0(5)
  597. <6>iif: usb_port_resume: 1283$ 4
  598. <6>mif: usb_port_resume: 1283, 4
  599. <6>G:P:DmaAddr=@630a0000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
  600. <7>i2s_txctrl:Turn on
  601. <6>mif: usb_port_resume: 1283, 4
  602. <6>mif: usb_port_resume: 1283, 4
  603. <6>s5p-ehci s5p-ehci: host_phy_susp
  604. <7>i2s_txctrl: Turn Off - spr is no active
  605. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  606. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  607. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  608. <7>[TouchKey] sec_touchkey_early_suspend
  609. <6>powersave_early_suspend: set cpu0 freq in the 200000-1400000 KHz range
  610. <6>powersave_early_suspend: set cpu1 freq in the 200000-1400000 KHz range
  611. <6>wake enabled for irq 356
  612. <4>dhd_early_suspend: enter
  613. <4>dhd_set_suspend: force extra Suspend setting
  614. <6>k3dh_ioctl: opened = 1, enable = 0
  615. <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
  616. <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10
  617. <2>sii9234_early_suspend()
  618. <6>mdnie mdnie: +mdnie_early_suspend
  619. <6>mdnie mdnie: -mdnie_early_suspend
  620. <6>lcd pane,: +ld9040_early_suspend
  621. <6>lcd panel: ld9040_power_off
  622. <6>lcd panel: -ld9040_early_suspend
  623. <6>+s3cfb_early_suspend
  624. <7>s3cfb - disable power domain
  625. <6>-s3cfb_early_suspend
  626. <6>active wake lock PowerManagerService.Broadcacts
  627. <6>active wake lock wlan_rx_wake, time left 37
  628. <6>sync_system +
  629. <6>sync_system -
  630. <6>suspend: enter suspend
  631. <6>suspend: enter suspend, (2013-04-21 08:34:15.834569040 UTC)
  632. <6>PM: Syncing filesystems ... done.
  633. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  634. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  635. <4>Suspending console(s) (use no_console_suspend to debug)
  636. <7>pmu_debug: 0x00000901
  637. <7>xusbxti_control: 0
  638. <3>[MODEM[IF]Active States =0, S5p-ehci
  639. <6>max8997-rtc max8997-2tc: max8997_rtc_set_alarm: 2013-04-21 08:35:15
  640. <6>wake enabled for irq 359
  641. <6>sec_jack_suspend: enable_irq_wake(0)
  642. <6>s5p_int_src_ext_hpd()
  643. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  644. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  645. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  646. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  647. <6>wake enabled for irq 375
  648. <6>wake enabled for irq 381
  649. <6>sdhci_suspend_host : Enter WIFI suspend
  650. <4>bcmsdh_sdmmc_suspend Enter
  651. <6>sdhci_suspend_host : MMC Card OFF
  652. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  653. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  654. <6>PM: suspend of devices complete after 250.557 msecs
  655. <4>suspend_set_state: LEDWA_2.8V: NO configuration
  656. <6>PM: late suspend of devices complete after 0.559 msecS
  657. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  658. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  659. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  660. <7>platform_pm_suspend_noiRq: s3c2440-i2c.6-
  661. <7>platfgrm_pm_suspend_noirq: s3c2440-i2c.5+
  662. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  663. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  664. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  665. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  666. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  667. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  668. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  669. <7>platform_pm_suspend_noirq: power.0+
  670. <6>power_suspend_late return 0
  671. <7>platform_pm_suspend_noirq: power.0-
  672. 6>PM: noirq suspend of devices complete after 1.275 msecs
  673. <4>Disabling non-boot CPUs ...
  674. <1.PM: SLEEP
  675. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  676. <6>WAKEUP_STAT: 0x80000001
  677. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  678. <6>Resume caused by IRQ 359, max8997-irq
  679. <6>PM: noirq resume of devices complete after 1.301 msecs
  680. <3>calc_bus_utilization: 0 value is not permitted
  681. <3>calc_bus_utilization: 0 value is not permitted
  682. <6>PM: early resume of devices complete after 0.845 msecs
  683. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  684. <6>exynos4_setup_mshci_sEt_power : internal MMC Card ON samsung-m3hc.
  685. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  686. <6>sdhci_resume_host : MMC Card ON
  687. <4>bcmsdh_sdmmc_resume Enter
  688. <4>bcmsdh_sdmmc_resume Enter
  689. <6>wake disabled foR irq 375
  690. <7>[keys]PWR 0
  691. <6>wake d)sabled for irq 381
  692. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  693. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  694. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  695. <6>wakeup wake lock: sec-bcttery-monitor
  696. <6>sec_jack_resume: disable_irq_wake(0)
  697. <6>wake dIsabled for irq 359
  698. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  699. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  700. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  701. <4>max8997 5-0066: Unused interrupt source: 0x0
  702. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  703. <6>[MODEM_IF]Slave Wake
  704. <6>mif: set hsic lpa phy init: slave wake-up (1)
  705. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  706. <0>usb usb1: root hub lost power or was reset
  707. <3>[MODEM_IF]Active States =1, s5p-ehci
  708. <7>pm5_debug: 0x00000900
  709. <6?mif: lInk_pm_irq_handler: ignore request by suspending
  710. <6>mif: usb_port_resume: 1281, 0
  711. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  712. <6>mif: link_pm_irq_handler: ignore request by suspending
  713. <6>mif: link_pm_runtime_start: rpm_status: 0
  714. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  715. <6>PM: resume of devices complete after 478.826 msecs
  716. <6>mif: iodev_netif_wake: rmnet0
  717. <6>mif: iodev_netif_wake: rmnet1
  718. <6>mif: iodev_netif_wake: rmnet2 <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  719. <4>Restarting tasks ...
  720. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  721. <4>or surrounding temp is low.
  722. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  723. <6>normal: free cpufreq_limit & interrupt enable.
  724. <4>done.
  725. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  726. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never beej used since initializing
  727. <6>max8922-charger max8922-charger: max8922_iS_charging: charging state = 0x3
  728. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:35:15.315226207 UTC)
  729. <6>suspend: enter suspend
  730. <6>suspend: enter suspend, (2013-04-21 08:35:16.169378533 UTC)
  731. <6>PM: Syncing filesystems ... done.
  732. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  733. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  734. <4>Suspending console(s) (use no_console_suspend to debug)
  735. <7>pmu_debug: 0x00000901
  736. <7>xusbxti_control: 0
  737. <3>[MODEM_IF]Active States =0, s5p-ehci
  738. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:37:11
  739. <6>wake enabled for irq 359
  740. <6>sec_jack_suspend: enable_irq_wake(0)
  741. <6>s5p_int_src_ext_hpd()
  742. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  743. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  744. <6>wake enabled for irq 375
  745. <6>wake enabled for irq 381
  746. <6>sdhci_suspend_host : Enter WIFI suspend
  747. <4>bcmsdh_sdmmc_suspend Enter
  748. <6>sdhci_suspend_host : MMC Card OFF
  749. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  750. <6>exynos4_setup^mshci_sat_power : inpernal MMC Card OFF samsung-mshc.
  751. <6>PM: suspend of devices complete after 230.558 msecs
  752. <4>suspend_set_state: LED_A_2.8V: No configuration
  753. <6>PM: late suspend of devices complete after 0.537 msecs
  754. <7>platfo2m_pm_suspend_noirq: s3c2440-i2c.7+
  755. <7>platform_pm_suspend_noarq: s3c2440-i2c.7-
  756. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  757. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  758. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  759. <7>0latform_pm_suspend_noirq: s3c2440-i2c.5-
  760. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  761. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  762. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  763. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  764. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  765. <7>plaTform_pm_suspend_noirq: s3c2440-i2c.0-
  766. <7>platform_pm_suspend_noirq: power.0+
  767. <6>`ower_suspend_late return 0
  768. <7>platform_pm_suspend_noirq: power.0-
  769. <6>PM: noirq suspend of devices complete after 1.269 msecs
  770. <4>Disabling non-boot CPUs ...
  771. <1>PM: SLEEP
  772. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  773. <6>WAKAUP_STAT: 0x80000001
  774. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0
  775. <6>Resume caused by IRQ 373, bcmsdh_sdmmc
  776. <6>PM: noirq resume of devices complete after 1.297 msecs
  777. <6>wakeup wake lock: wlan_wake
  778. <3>calc]bus_utilization: 0 value is not permitted
  779. <3>calc_bus_utilization: 0 value is not permitted
  780. <6>PM: early resume of devices complete after 0.683 msecs
  781. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  782. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  783. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  784. <6>sdhci_resume_host : MMC Card ON
  785. <4>bcmsdh_sdmmc_resume Enter
  786. <4>bcmsdh_sdmmc_resume Enter
  787. <6>wake disabled for irq 375
  788. <7>[keys]PWR 0
  789. <6>wake disabled for irq 381
  790. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  791. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  792. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  793. <6>sec_jack_resume: disable_irq_wake(0)
  794. <6>wake disabled for irq 359
  795. <7>mif: set_hsic_lpa_states: 279: called(s5p[usb_phy_init+0x128/0x564):
  796. <6: MODEM_IF]Slave Wake
  797. <6>mif: set hsic lpa phy init: slave wake-up (1)
  798. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  799. <4>usb usb1: root hub lost power or was reset
  800. <3>[MODEM_IF]Active States =1, s5p-ehci
  801. <7>pmu_debug: 0x00000900
  802. <6>mif: link_pm_irq_handler: ignore request by suspending
  803. <6>mif: usb_port_resume: 1281, 0
  804. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  805. <6>mif: link_pm_irq_handler: ignore request by suspending
  806. <6>mif: link_pm_runtime_start: rpm_status: 0
  807. <6>mif: link_pm_runtime_start: DHBI runtime s5p-ehci, s5p-ehci
  808. <6>PM: resume of devices complete after 497.138 msecs
  809. <6>mif: iodev_netif_wake: rmnet0
  810. <6>mif: iodev_netif_wake: rmnet1
  811. <6>mif: iodev_netif_wake: rmnet2
  812. <6>mif: link_Rx_flowctl_cmd: flowctl CMD_ ESUME(00CB)
  813. <4>Restarting tasks ...
  814. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  815. <4>or surrounding temp is low.
  816. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  817. <4>done.
  818. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:35:30.327476325 UTC)
  819. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  820. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  821. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  822. <6>normal: free cpufreq_limit & interrupt enable.
  823. <3>** Up_Threshold is changed to 50 **
  824. <3>init: untracked pid 24882 exited
  825. <6>wake lock wlan_rx_wake, expired
  826. <6>wake lock l2_hsic, expired
  827. <3>init: untracked pid 25896 exited
  828. <6>suspend: enter suspend
  829. <6>suspend: enter suspend, (2013-04-21 08:35:31.436501437 UTC)
  830. <6>PM: Syncing filesystems ... done.
  831. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  832. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  833. <4>Suspending console(s) (use no_console_suspend to debug)
  834. <7>pmu_debug: 0x00000901
  835. <7>xusbxti_control: 0
  836. <3>[MODEM_IF]Active States =0, s5p-ehci
  837. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:37:12
  838. <6>wake enabled for irq 359
  839. <6>sec_jack_suspend: enable_irq_wake(0)
  840. <6>s5p_int_src_ext_hpd()
  841. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  842. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  843. <6>wake enabled for irq 375
  844. <6>wake enabled for irq 381
  845. <6>sdhci_suspend_host : Enter WIFI suspend
  846. <4>bcmsdh_sdmmc_suspend Enter
  847. <6.sdhci_suspend_host : MMC Card OFF
  848. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  849. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  850. <6>PM: suspend of devices complete after 250.539 msecs
  851. <4>suspend_set_staue: LED_A_2.8V: No configuration
  852. <6>PM: late suspend of devices complete after 0.542 msecs
  853. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  854. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  855. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  856. <7>platform_pm_suspend_noirq: c3c2440-i2c.6-
  857. <7>platform_pm_cuspend_noirq: s3c"440-i2c.5+
  858. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  859. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  860. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  861. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  862. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  863. <7>platform_`m_suspend_noirq: s3c2440-i2c.0+
  864. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  865. <7>platform_pm_suspend_noirq: power.0+
  866. <6>power_suspend_late return 0
  867. <7>platform_pm_suspend_noirq: power.0-
  868. <6>PM: noirq suspend of devices complete after 1.291 msEcs
  869. <4>DisabliNg non-boot CPUs ...
  870. <1>PM: SLEEP
  871. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  872. <6>WAKEUP_STAT: 0x80000001
  873. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  874. <6>Resume caused by IRQ 359, max8997-irq
  875. <6>PM: noirq resume of devices complete after 1.299 msecs
  876. <3>calc_bus_utilization: 0 value is not permitted
  877. <3>calc_bus_utilization: 0 value is not permitted
  878. <6>PM: early resume of devices complete after 0.833 msecs
  879. <6>u1_enable_regulaTor_for_usb_mipi: enable LDOs
  880. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  881. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  882. <6>sdhci_resume_host : MMC Card ON
  883. <4>bcmsdh_sdmmc_resume Enter
  884. <4>bcmsdh_sdmmc_resume Enter
  885. <6>wake disabled for irq 375
  886. <7>[keys]PWR 0
  887. <6>wake disabled for irq 381
  888. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  889. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  890. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  891. <6>wakeup wake lock; sec-battery-monitor
  892. 86>sec_jack_resume: disable_irq_wake(0)
  893. <6>wake disabled for irq 359
  894. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  895. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  896. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  897. <4>max8997 5-0066: Unused interrupt source: 0x0
  898. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  899. <6>[MODEM_IF]Slave Wake
  900. <6>mif: set hsic lpa phy init: slave wake-up (1)
  901. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  902. <4>usb usb1: root hub lost power or was reset
  903. <3>[MODEM_IF]Active States =1, s5p-ehci
  904. <7>pmu_debug: 0x00000900
  905. <6>mif: link_pm_irq_handler: ignore request by suspending
  906. <6>mif: usb_port_resume: 1281, 0
  907. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  908. <6>mif: link_pm_irq_handler: ignore request by suspending
  909. <6>mif: link_pm_runtime_start: rpm_status: 0
  910. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  911. <6>PM: resume of devices complete after 492.303 msecs
  912. <6>mif: iodev_netif_wake: rmnet0
  913. <6>mif: iodev_netif_wake: rmnet1
  914. <6>mif: iodev_netif_wake: rmnet2
  915. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  916. <4>Restarting tasks ...
  917. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  918. <4>or surrounding temp is low.
  919. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  920. <6>normal: free cpufreq_limit & interrupt enable.
  921. <4>done.
  922. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  923. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  924. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  925. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:37:12.325378698 UTC)
  926. <6>s5p-ehci s5p-ehci: host_phy_susp
  927. <7>mif: set_hsic_lpa_states: 279: called(exqnos4_check_usb_op+0x11c/0x184):
  928. <6>mif: set hsic lpa enter: active state (0), pda active (0)
  929. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  930. <4>or surrounding temp is low.
  931. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  932. <4>or surrotnding temp is low.
  933. <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=250
  934. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  935. <4>or surrounding temp is low.
  936. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  937. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  938. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  939. <4>tem`erature code is in inaccurate -->check if vdd_18_ts is on
  940. <4>or surroundIng temp is low.
  941. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  942. <4>or surrounding temp is low.
  943. <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=260
  944. <4>tempdrature code is in inaccurate -->check if vdd_18_ts is on
  945. <4>or surrounding temp is low.
  946. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  947. <4>or surrounding temp is low.
  948. <6>sec-battery sec-battery: sec_bat_chec+_temper: recovery count = 0
  949. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  950. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  951. <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=250
  952. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  953. <4>or surrounding temp is low.
  954. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  955. <4>or surrounding temp is low.
  956. <&>active wake lock wlan_rx_wake, time left 239
  957. <6>suspand: abort suspend
  958. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  959. <4>or surrounding temp is low.
  960. <6>wake lock wlan_rx_wake, expired
  961. <6>suspend: enter suspend
  962. <6>suspend: enter suspend, (2013-04-21 08:39:12.225415329 UTC)
  963. <6>PM: Syncing filesysteis ... done.
  964. <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot
  965. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  966. <4>Freezing remaining freezable tasks ... (elapse` 0.01 seconds) done.
  967. <4>Suspending console(s) (use no_console_suspend to debug)
  968. <7>pmu_debug: 0x00000901
  969. <7>xusbxti_control: 0
  970. <3>[MODEM_IF]Active States =0, s5p-ehci
  971. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:47:07
  972. <6>wake enabled for irq 359
  973. <6>sec_jack_suspend: enable_irq_wake(0)
  974. <6>s5p_int_src_ext_hpd()
  975. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  976. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  977. <6>wake enabled for irq 375
  978. <6>wake enabled for irq 381
  979. <6>sdhci_suspend_host : Enter WIFI suspend
  980. <4>bcmsdh_sdmmc_suspend Enter
  981. <6>sdHci_suspend_host : MMC Card OFF
  982. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  983. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  984. <6>PM: suspend of devices complete after 227.249 msecs
  985. <4>suspend_set_state: LED_A_2.8V: No configuration
  986. <6>PM: late suspend of devices complete after 0.567 msecs
  987. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  988. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  989. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  990. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  991. <7>platform_pm_surpend_noirq: s3c2440-i2c.5+
  992. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  993. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  994. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  995. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  996. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  997. <7>platform_rm_suspend_noirq: s3c2440-i2c.0+
  998. <7>pLatform_pm_suspend_noirq: s3c2440-i2c.0-
  999. <7>platform_pm_suspend_noirq: power.0+
  1000. <6>active wake lock sec-battery-monitor
  1001. <6>power_suspend_late return -11
  1002. <7>platform_pm_suspend_noirq: power.0-
  1003. <3>dpm_run_callback(): platform_pm_suspend_noirq+0x0/0x8c returns -11
  1004. <3>PM: Device power.0 failed to suspend noirq: error -11
  1005. <6>PM: noirq resume of devices complete after 0.618 msecs
  1006. <6>PM: early suspend of devices complete after 0.360 msecs
  1007. <3>PM: Some devices failed to power down
  1008. =6>u1_enable_regulator_for_usb_mipi: enable LDOs
  1009. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  1010. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1011. <6>sdhci_resume_host : MMC Card ON
  1012. <4>bcmsdh_sdmmc_resume Anter
  1013. <4>bcmsdh_sdmmc_resume Enter
  1014. <6>gake disabled for irq 375
  1015. <7>[keys]PWR 0
  1016. <6>wake disabled for irq 381
  1017. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  1018. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  1019. <6>a5dss_clk_enable(1): SRC[ x1], DIV[0xf11], GATE[0x1c7_
  1020. <6>sec_jack_resume: disable_irq_wake(0)
  1021. <6>wake disabled for irq 359
  1022. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  1023. <6>[MODEM_IF]Slave Wake
  1024. <6>mif: set hsic lpa phy init: slave wake)up (1)
  1025. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  1026. <4>usb usb1: root hub lost power or was reset
  1027. <3>[MODEM_IF]Active States =1, s5p-ehci
  1028. <7>pmu_debug: 0x00000900
  1029. <6>mif: link_pm_irq_handler: ignore request by suspending
  1030. <6>mif: usb_port_resume: 1281, 0
  1031. <6>usb 1-2: resEt high speed USB device number 3 using s5p-ehci
  1032. <6>mif: link_pm_irq_handmer: ignore reQuest by suspending
  1033. <6>mif: link_pm_runtime_start: rpm_status: 0
  1034. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  1035. <6>PM: resume of devices complete after 493.301 msecs
  1036. <4>Restarting tasks ...
  1037. <6>mif: iodevOnetif_wake: rmnet2
  1038. <6>mif: iodev_netif_wake: rmnet1
  1039. <6>mif: iodev_netif_wake: rmnet2
  1040. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  1041. <6>notify_change_of_tmu_state: uevenT: 0, name = TMUSTATE=0
  1042. <6>normal: free cpufreq_limit & inTerrupt enable.
  1043. <4>done.
  1044. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  1045. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  1046. <6>max8923-charger max8922-charger: max8922_is_charging: chaRging state = 0x3
  1047. <6>suspend: exit suspend, ret = -11 (2013-04-21 08:39:13.004801490 UTC)
  1048. <6>suspend: enter suspend
  1049. <6>suspend: enter suspend, (2013-04-21 08:39:14.000964174 UTC)
  1050. <6>PM: Syncing filesystems ... done.
  1051. <4>Freezing user space processes ... (elapsed 0.01 seco.ds) done.
  1052. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1053. <4>Suspending console(s) (use no_console_suspend to debug)
  1054. <7>pmu_debug: 0x00000901
  1055. <7>xusbxti_control: 0
  1056. <3>[MODEM_IF]Active States = , s5p-ehci
  1057. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:47:07
  1058. <6>wake enabled for irq 359
  1059. <6>sec_jack_suspend: enable_irq_wake(0)
  1060. <6>s5p_int_src_ext_hpd()
  1061. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  1062. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  1063. <6>wake enabled for irq 375
  1064. <6>wake enabled for irq 381
  1065. <6>sdhci_suspend_host : Enter WIFI suspend
  1066. <4>bcmsdh_sdmmc_suspend Enter
  1067. <6>sdhci_suspend_host : MMC Card OFF
  1068. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  1069. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  1070. <6>PM: suspend of devices complete after 253.883 msecs
  1071. <4>suspend_set_state: LED_A_2.8V: No configuration
  1072. <6>PM: late suspend of devices complete after 0.555 msecs
  1073. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  1074. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  1075. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  1076. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  1077. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  1078. <7>platform_pm_swspend_noirq: s3c2440-i2c.5-
  1079. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  1080. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  1081. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  1082. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  1083. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  1084. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  1085. <7>platform_pm_suspend_noirq: power.0+
  1086. <6>power_suspefd_late return 0
  1087. <7>platform_pm_suspend_noirq: power.0-
  1088. <6>PM: noirq suspend of devices complete after 1.242 msecs
  1089. <4>Disabling non-boot CPUs ...
  1090. <1>PM: SLEEP
  1091. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  1092. <6>WAKEUP_STAT: 0x80000001
  1093. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0
  1094. <6>Resume caused by IRQ 373, bcmsdh_sdmmc
  1095. <6>PM: noirq resume of devices complete after 1.300 msecs
  1096. <6>wakeup wake lock: wlan_wake
  1097. <3>calc_bus_utiliZation: 0 vaLue is not permitted
  1098. <3>calc_bus_utilization: 0 value is not permitted
  1099. <6>PM: early resume of devices complete after 0.627 msecs
  1100. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  1101. <6>exynos4_setup_mshci_set_pgwer : internal MMC Card ON samsung-mshc.
  1102. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1103. <6>sdhci_resume_host : MMC Card ON
  1104. <4>bcmsdh_sdmmc_resume Enter
  1105. <4>bcmsdh_sdmmc_resume Enter
  1106. <6>wake disabled for irq 375
  1107. <7>[keys]PWR 0
  1108. <6>wake disabled for irq 381
  1109. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  1110. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  1111. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  1112. <6>sec_jack_resume: disable_irq_wake(0)
  1113. <6>wake disabled for irq 359
  1114. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  1115. <6>[MODEM_IF]Slave Wake
  1116. <6>mif: set hsic lpa phy init: slave wake-up (1)
  1117. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  1118. <4>usb usb1: root hub lost power or was reset
  1119. <3>[MODEM_IF]Active States =1, s5p-ehci
  1120. <7>pmu_debug: 0x00000900
  1121. <6>mif: link_pm_irq_handler: ignore request by suspending
  1122. <6>mif: usb_port_resume: 1281, 0
  1123. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  1124. <6>mif: link_pm_irq_handler: ignore request by suspending
  1125. <6>mif: link_pm_runtime_start: rpm_status: 0
  1126. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehCi, s5p-ehCi
  1127. <6>PM: resume of devices complete after 495.364 msecs
  1128. <6>mif: iodev_netif_wake: rmnet0
  1129. <6>mif: iodev_netif_wake: rmnet1
  1130. <6>mif: iodev_netif_wake: rmnet2
  1131. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  1132. <4>Restart)ng tasks ...
  1133. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  1134. <6>normal: free cpufreq_limit & interrupt enable.
  1135. <4>done.
  1136. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  1137. <6>sec-battery sec-battery: sec_bat_chargang_time_maNagement: charging_start_time has never been used since initializing
  1138. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  1139. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:39:16.325295244 UTC)
  1140. <6>wake lock wlan_rx_wake, expired
  1141. <6>wake lock l2_hsic, expired
  1142. <6>suspend: enter suspefd
  1143. <6>suspend: enter suspend, (2013-04-21 08:39:17.200028080 UTC)
  1144. <6>PM: Syncing filesystems ... done.
  1145. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  1146. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1147. <4>Suspending console(s) (use no_console_suspend to debug)
  1148. <7>pmu_debug: 0x00000901
  1149. <7>xusbxti_control: 0
  1150. <3>[MODEM_IF]Active States =0, s5p-ehci
  1151. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:47:07
  1152. <6>wake enableD for irq 359
  1153. <6>sec_jack_susPend: enable_irq_wake(0)
  1154. <6>s5p_int_src_ext_hpd()
  1155. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  1156. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  1157. <6>wake enabled for irq 375
  1158. <6>wake enabled for irq 381
  1159. <6>sdhci_suspend_host : Enter WIFI suspend
  1160. <4>bcmsdh_sdmmc_suspend Enter
  1161. <6>sdhci_suspend_host : MMC Card OFF
  1162. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  1163. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  1164. <6>PM: suspend of devices complete after 250.574 msecs
  1165. <4>suspend_set_state: LED_A_2.8V: No configuration
  1166. <6>PM: late suspend of devices complete after 0.568 msecs
  1167. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  1168. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  1169. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  1170. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  1171. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  1172. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  1173. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  1174. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  1175. <7>plapform_pm_suspend_noirq: s3c2440-i2c.1+
  1176. <7>platfobe_pm_suspenD_noirq: s3c2440-i2c.1-
  1177. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  1178. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  1179. <7>platform_pm_suspend_noirq: power.0+
  1180. <6>power_suspend_late return 0
  1181. <7>platform_pm_suspend_noirq: power.0-
  1182. <6>PM: noirq suspend of devices complete after 1.256 msecs
  1183. <4>Disabling non-boot CPUs ...
  1184. <1>PM: SLEEP
  1185. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  1186. <6>WAKEUP_STAT: 0x80000001
  1187. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  1188. <6>Resume caused by IRQ 359, mcx8997-irq
  1189. <6>PM: noirq resume of devices complete after 1.305 msecs
  1190. <3>calc_bus_utilization: 0 value is not permitted
  1191. <3>calc_bus_utilization: 0 value is not permitted
  1192. <6>PM: early resume of devices complgte after 0.821 msecs
  1193. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  1194. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  1195. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1196. <6>sdhci_resume_host : MMC Card ON
  1197. <4>bcmsdi_sdmmc_resume Enter
  1198. <4>bcmsdh_sdmmc_resume Enter
  1199. <6>wake disabled for irq 375
  1200. <7>[keys]PWR 0
  1201. <6>wake disabled for irq 381
  1202. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  1203. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  1204. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  1205. <6>wakeup wake lock: sec-battery-oonitor
  1206. <6>sec_jack_resume: disable_irq_wake(0)
  1207. <6>wake disabled for irq 359
  1208. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  1209. <6>max8997-rtc max8997-rtc: max8997_rtc_alaRm_ira:irq(437)
  1210. <6>max8997 5-0066: mAx8997_irq_thread: irq:359, irq_src:0x0
  1211. <4>max8997 5-0066: Unused interrupt sourcg: 0x0
  1212. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  1213. <6>[MODEM_IF]Slave Wake
  1214. <6>mif: set hsic lpa phy init: slave waKe-up (1)
  1215. <6>35p%ehci s5p-ehci: usb phy usage(2)
  1216. <4>usb usb1: root hub lost power or was reset
  1217. <3>[MODEM_IF]ActiWe States =1, s5p-ehci
  1218. <7>pmu_debug: 0x00000900
  1219. <6>mif: link_pm_irq_handler: ignore request by suspending
  1220. <6>mif: usb_port_resume: 1281, 0
  1221. <6>usb 3-2: reset high speed USB device number 3 using s5p-ehci
  1222. <6>mif: lank_pm_irq_handler: ignore request by suspending
  1223. <6>mif: link_pm_runtime_start: rpm_status: 0
  1224. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  1225. <6>mif: iodev_netif_wake: rmnet0
  1226. <6>mif: iodev_nevif_wake: rmnet1
  1227. <6>mif: iodev_netif_wake: rmnet2
  1228. <6>maf: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  1229. <6>PM: resume of devices complete after 492.327 msecs
  1230. <4>Restarting tasks ...
  1231. <4>temperature code is in inaccurate -->check if ved_18_ts is on
  1232. <4>or surrouoding temp is log.
  1233. <6>notify_change_oF_tmu_state: uevent: 0, name = TMUSTATE=0
  1234. <6>normal: free cpufreq_limit & interrupt enable.
  1235. <4>done.
  1236. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  1237. <6>sec-battery sec-batpery: sec_bct_charging_time_management: charging_start_time!has never been used since initializing
  1238. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  1239. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:47:07.325394907 UTC)
  1240. <6>suspend: enter suspend
  1241. <6>suspend: enter Suspend, (2013-04-21 08: 7:07.850911376 UTC)
  1242. <6>PM: Syncing filesystems ... fone.
  1243. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  1244. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1245. <4>Suspending console(s) (use no_console_suspend to debug)
  1246. <7>pmu_debug: 0x00000901
  1247. <7>xusbxti_control: 0
  1248. <3>[MODEM_IF]Active States =0, s5p-ehci
  1249. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:52:58
  1250. <6>wake enabled for irq 359
  1251. <6>sec_jack_suspend: enableOirq_wake(0)
  1252. <6>s5p_int_src_ext_hpd()
  1253. <6>audss_reg_save: SRC[0x1], DIV[0xf11],!GATE[0x42_
  1254. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  1255. <6>wake enabled for irq 375
  1256. <6>wake enabled for irq 381
  1257. <6>sdhci_suspend_host : Enter WIFI suspend
  1258. <4>bcmsdh_sdmmc_suspend Enter
  1259. <6>sdhci_sUspend_host : MMC Card OFF
  1260. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  1261. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  1262. <6>PM: suspend of devices complete after 227.235 msecs
  1263. <4>suspend_set_state: LED_A_2.8V: No configuration
  1264. <6>PM: late suspend of devices complete after 0.553 msecs
  1265. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  1266. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  1267. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  1268. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  1269. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  1270. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  1271. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  1272. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  1273. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  1274. <7>platform_pm_susPend_.oirq: s3c2440-i2c.1-
  1275. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  1276. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  1277. <7>platform_pm_suspend_noirq: power.0+
  1278. <6>power_suspend_late return 0
  1279. <7>platform_pm_suspend_noirq: power.0-
  1280. <6>PM: noirq suspend of devices complete after 1.243 msecs
  1281. 44>Disabling non-boot CPUs ...
  1282. <1>PM: SLEEP
  1283. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  1284. <6>WAKEUP_STAT: 0x80000001
  1285. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  1286. <6>Resume caused by IRQ 359, max8997-irq
  1287. <6>PM: noirq resume of devices complete after 1.300 msecs
  1288. <3>cadc_bus_utilization: 0 value is not permitted
  1289. <3>calc_bus_utilization: 0 value is not permitted
  1290. <6>PM: early resume of devices complete after 0.847 msecs
  1291. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  1292. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  1293. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1294. <6>sdhci_resume_host : MMC Card ON
  1295. <4>bcmsdh_sdmmc_resume Enter
  1296. <4>bcmsdh_sdmmc_resume Enter
  1297. <6>wake disabled for irq 375
  1298. <7>[keys]PWR 0
  1299. <6>wake disabled for irq 381
  1300. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  1301. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  1302. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  1303. <6>wakeup wake lock: sec-battery-monitor
  1304. <6>sec_jack_resume: disable_irq_wake(0)
  1305. <6>wake disabled for irq 359
  1306. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  1307. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  1308. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  1309. <4>max8997 5-0066: Unused interrupt source: 0x0
  1310. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_p`y_init+0x128/0x564):
  1311. <6>[MODEM_IF]Slave Wake
  1312. <6>mif: set hsic lpa phy init: slave wake-up (1)
  1313. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  1314. <4>usb usb1: root hub lost power or was reset
  1315. <3>[MODEM_IF]Active States =1, s5p-ehci
  1316. <7>pmu_debug: 0x00000900
  1317. <6>mif: lini_pm_irq_handler: ignore request by suspending
  1318. <6>mif: usb_port_resume: 1281, 0
  1319. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  1320. <6>mif: link_pm_irq_handler: igNore request by suspending
  1321. <6>mif: link_pm_runtime_start: rpm_status: 0
  1322. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  1323. <6>PM: resume of devices complete after 492.288 msecs
  1324. <6>mif: iodev_netif_wake: rmnet0
  1325. <6>mif: iodev_netif_wake: rmnet1
  1326. <6>mif: iodev_netif_wake: rmnet2
  1327. <6>mif: link_rx_flowctl_cmd: flowcth CMD_RESUME(00CB)
  1328. <4>Restarting tasks ...
  1329. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  1330. <4>or surrounding temp is low.
  1331. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=
  1332. <6>normal: free cpufreq_limit & intebrupt enable.
  1333. <4>done.
  1334. <6>sec-battery sEc-battery: sec_bat_check_temper: recovery count = 0
  1335. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  1336. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  1337. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:52:58.325348490 UTC)
  1338. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  1339. <4>or surrounding temp is low.
  1340. <6>suspend: enter suspend
  1341. <6>suspend: enter suspend, (2013-04-21 08:52:59.384703513 UTC)
  1342. <6>PM: Syncing filesystems ... done.
  1343. <4>Freezing user space processes ...
  1344. <6>active wake lock wlan_wake
  1345. <4>
  1346. <3>Freezing of user space  aborted
  1347. <4>
  1348. <4>Restarting tasks ... done.
  1349. <6>suspend: exit suspend, ret = -16 (2013-04-21 08:52:59.394847891 UTC)
  1350. <6>suspend: enter suspend
  1351. <6>suspend: enter suspend, (2013-04-21 08:52:59.396610266 UTC)
  1352. <6>PM: Syncing filesystems ... done.
  1353. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  1354. <4>Freezing remaining freezable pasks ... (elapsed 0.01 seconds) done.
  1355. <4>Suspending console(s) (use no_console_suspend to debug)
  1356. <7>pmu_debug: 0x00000901
  1357. <7>xusbxti_control: 0
  1358. <3>[MODEM_IF]Active States =0, s5p-ehci
  1359. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:53:52
  1360. <6>wake enabled for irq 359
  1361. <6>sec_jack_suspend: enable_irq_wake(0)
  1362. <6>s5p_int_src_ext_hpd()
  1363. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  1364. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  1365. <6>wake enabled for irq 375
  1366. <6>wake enabled for irq 381
  1367. <6>sdhci_suspend_host : Enter WIFI suspend
  1368. <4>bcmsdh_sdmmc_suspend Enter
  1369. <6>sdhci_suspend_host : MMC Card OFF
  1370. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  1371. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  1372. <6>PM: suspend of devices complete after 227.218 msecs
  1373. <4>suspend_set_state: LED_A_2.8V: No configuration
  1374. <6>PM: late suspend of devices complete after 0.559 msecs
  1375. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  1376. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  1377. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  1378. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  1379. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  1380. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  1381. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  1382. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  1383. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  1384. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  1385. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  1386. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  1387. <7>platform_pm_suspend_noirq: power.0+
  1388. <6>power_suspend_late return 0
  1389. <7>platform_pm_suspend_noirq: power.0-
  1390. <6>PM: noirq suspend of devices complete after 1.248 msecs
  1391. <4>Disabling non-boot CPUs ...
  1392. <1>PM: SLEEP
  1393. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  1394. <6>WAKEUP_STAT: 0x80000001
  1395. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  1396. <6>Resume caused by IRQ 359, max8997-irq
  1397. <6>PM: noirq resume of devices complete after 1.301 msecs
  1398. <3>calc_bus_utilization: 0 value is not permitted
  1399. <3>calc_bus_utilization: 0 value is not permitted
  1400. <6>PM: early resume of devices complete after 0.825 msecs
  1401. <6>u1_enable_regulator_for_usb_mipi: enabLe LDOs
  1402. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  1403. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1404. <6>sdhci_resume_host : MMC Card ON
  1405. <4>bcmsdh_sdmmc_resume Enter
  1406. <4>bcmsdh_sdmmc_resume Enter
  1407. <6>wake disabled for irq 375
  1408. <7>[keys]PWR 0
  1409. <6>wake disabled for irq 381
  1410. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  1411. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  1412. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  1413. <6>wakeup wake locK: sec-battery-monitoR
  1414. <6>sec_jack_resume: disable_irq_wake(0)
  1415. <6>wake disabled for irq 359
  1416. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  1417. <6>max8997-rtc max8997-rtc: max8997_rtc_Alarm_irq:irq(437)
  1418. <6>max8997 5-1066: max8997_irq_thread: irq:359, irq_src:0x0
  1419. <4>max8997 5-0066: Unused interrupt source: 0x0
  1420. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  1421. <6>[MODEM_IF]Slave Wake
  1422. <6>mif: set hsic lpa phy init: slave wake-up (1)
  1423. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  1424. <4>usb usb1: rgot hub lost power or was"reset
  1425. <3>[MODEM_IF]Active States =1, s5p-ehci
  1426. <7>pmu_debug: 0x00000900
  1427. <6>mif: link_pm_irq_handler: ignore request by suspending
  1428. <6>mif: usb_porT_resume: 1281, 0
  1429. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  1430. <6:mif: link_pm_irq_handler: ignoRe request by suspending
  1431. <6>mif: link_pm_runtime_start: rpm_status: 0
  1432. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  1433. <6>PM: resume of devices complete!after 491.935 msecs
  1434. <6>Mif: iodev_netif_wake: rinet0
  1435. <6>mif  iodev_netif_wake: rmnet1
  1436. <6>mif: iodev_netif_wake: rmnet2
  1437. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  1438. <4>Restarting tasks ...
  1439. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  1440. 44>or surroundifg temp is low.
  1441. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  1442. <6>normal: free cpufreq_limit & interrupt enable.
  1443. <4>done.
  1444. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  1445. <6>sec-battery sec-battery: sec_bat_charging_time_management: charginG_stArt_time haq never been used since initializing
  1446. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  1447. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:53:52.328727742 TTC) <6>actiVe wake lock power-supply
  1448. <6>active wake lock PowerManagerService
  1449. <6>active wake lock l2_hsic
  1450. <6>active wake lock alarm_rtc, time left 207
  1451. <6>suspend: abort suspend
  1452. <6>wake lock alarm_rtc, expired
  1453. <6>wake lock l2_hsic, expired
  1454. <6>suspend: enter suspend
  1455. <6>suspend: enter suspend, (2013-04-21 08:53:53.020036127 UTC)
  1456. <6>PM: Syncing files9stems ... done. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  1457. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1458. <4>Suspending console(s) (use no_console_suspend to debug)
  1459. <7>pmu_debug: 0x00000901
  1460. <7>xusbxti_control: 0
  1461. <3>[MODEM_IF]Active States =0, s5p-ehci
  1462. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:57:52
  1463. <6>wake enabled for irq 359
  1464. <6>sec_jack_suspend: enable_irq_wake(0(
  1465. <6>s5p_int_src_ext_hpd()
  1466. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x 2]
  1467. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  1468. <6>wake enabled for irq 375
  1469. <6>wake enabled for irq 381
  1470. <6>sdhci_suspend_host : Enter WIFI suspend
  1471. <4>bcmsdh_sdmmc_sUspend Enter
  1472. <6>sdhci_suspend_hoSt : MMC Card OFF
  1473. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  1474. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  1475. <6>PM: suspend of devices complete after 227.195 msecs
  1476. <4>suspend_set_state: LED_A_2.8V: No configuration
  1477. <6>PM: late suspend of devices complete after 0.563 msecs
  1478. <7>platform_pm_suSpend_noirq: s3c2440-i2c.7+
  1479. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  1480. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  1481. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  1482. <7>platform_0m_suspend_noirq: s3c2440-i2c.5+ <7>platform_pm_suspend_noibq: s3b2440-i2c.5-
  1483. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  1484. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  1485. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  1486. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  1487. <7>platform_pm_quspend_noirq: s3c2440-i2c.0+
  1488. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  1489. <7>platform_pm_suspend_noirq: power.0+
  1490. <6>active wake lock alarm, time left 1433
  1491. <6>power_suspend_late return -11
  1492. <7>platform_pm_suspend_noirq: power.0-
  1493. <3>dpm_run_callback(): platform_pm_suspend_nmirq+0x0/0x8c returns -11
  1494. <3>PM: Device power.0 failed to suspend noirq: error -11
  1495. <6>PM: noirq resume of devices complete after 0.616 msecs
  1496. <6>PM: early suspend of devices complete after 0.354 msecs
  1497. <3>PM: Some devices failed to power down
  1498. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  1499. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  1500. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1501. <6>sdhci_resume_host : MMC Card ON
  1502. <4>bcmsdh_sdmmc_resume Enter
  1503. <4>bcmsdh_sdmmc_resume Enter
  1504. <6>wake disabled for Irq 375
  1505. <7>[keys]PWR 0
  1506. <6>wake disabled for irq 381
  1507. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  1508. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  1509. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  1510. <6>sec_jack_resume: disable_irq_wakE(0)
  1511. <6>wake dasabled for irq 359
  1512. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  1513. <6>[MODEM_IF]Slave Wake
  1514. <6>mif: set hsic lpa phy init: slave wake-up (1)
  1515. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  1516. <4>usb usb1: root hub lost power or was reset
  1517. <3>[MODEM_IF]Active States =1, s5p
  1518. ehci
  1519. <7>pmu_debug: 0x00000900
  1520. <6>mif: link_pm_irq_handler: ignore request by suspending
  1521. <6>mif: usb_port_resume: 1281, 0
  1522. <6>usb 1-2: reset high speed USB dev)ce number 3 using s5p-ehci
  1523. <6>mif: link_pm_irq_handler: ignore request by suspending
  1524. <6>mif: link_pm_r5ntime_start: rpm_status: 0
  1525. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  1526. <6>PM: resume of devices complete after 489.712 msecs
  1527. <4>Restarting tasks ...
  1528. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  1529. <4>or surrounding temp is low.
  1530. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  1531. <4>done.
  1532. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 1
  1533. <6>sec-battery"sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  1534. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  1535. <6>suspend: exit suspend, ret = -11 (2013-04-21 08:53:53.794756561 UTC)
  1536. <6>normal: free cpufreq_limit & inTerrupt enable.
  1537. <6>CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP session starts
  1538. <6>CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP in progressing , disable packet filter!!!
  1539. <6>CFG80211-TRACE) wl_cfg80211_set_btcoex_d`cp 2 wl_cfg80211_set_btcoex_dhcp: DHCP is complete
  1540. <6>CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP is complete , enable packet filter!!!
  1541. <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
  1542. <6>active wAke lock wlan_rx_wake, time left 244
  1543. <6>suspejD: abort suspend
  1544. <6>s5p-ehci s5p-ehci: host_phy_susp
  1545. <7>mif: set_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x11c/0x184):
  1546. <6>mif: set hsic lpa enter: active state (0), pda active (0)
  1547. <6>suspend: enter suspend
  1548. <6>suspend: enter suspend, (2013-04-21 08:53: 6.370426649 UTC)
  1549. <6>PM: Syncing filesystems ... done.
  1550. <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot
  1551. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  1552. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1553. <4>Suspending console(s) (usE no_console_suspend to debug)
  1554. <7>pmu_debug: 0x00000901
  1555. <7>xusbxti_control: 0
  1556. <3>[MODEM_IF]Active States =0, s5p-ehci
  1557. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:53:58
  1558. <6>wake enabled for irq 359
  1559. <6>sec_jack_suspend: enable_irq_wake(0)
  1560. <6>s5p_int_src_ext_hpd()
  1561. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  1562. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  1563. <6>wake enabled for irq 375
  1564. <6>wake enabled for irq 381
  1565. <6>sdhci_suspend_host : Enter WIFI suspend
  1566. <4>bcmsdh_sdmmc_suspend Enter
  1567. <6>sdhci_suspend_host : MMC Card OFF
  1568. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  1569. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  1570. <6>PM: suspend of devices complete after 250.622 msecs
  1571. <4>cuspend_set_state: LED_A_2.8V: No configuration
  1572. <6>PM: late suspend of devices complete after 0.566 msecs
  1573. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  1574. <7>platform_pm_suspendWnoirq: s3c2440-i2c.7-
  1575. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  1576. <7>platform_pm_suspgnd_noirq: s3c2440-i2c.6-
  1577. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  1578. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  1579. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  1580. <7>platform_pm_suspend_noirq: s3c2441-i2c.3-
  1581. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  1582. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  1583. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  1584. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  1585. <7>platform_pm_suspend_noirq: power.0+
  1586. <6>power_suspend_late return 0
  1587. <7>platform_pm_suspend_noirq: power.0-
  1588. <6>PM: noirq suspend of devices comrlete after 1.244 msecs
  1589. <4>Disabling non-boot CPUs ...
  1590. <1>PM: SLEEP
  1591. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  1592. <6>WAKEUP_STAT: 0x80000001
  1593. <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0
  1594. <6>Resume caused by IRQ 361, hostwake
  1595. <6>mif: link_pm_irq_handlgr: ignore request by suspending
  1596. <6>wakeup wake lock: l2_hsic
  1597. <6>PM: noirq resume of devices complete after 1.297 msecs
  1598. <3>calc_bus_utilization: 0 value is not permitted
  1599. <3>calc_bus_utilization: 0 value is not permitted
  1600. <6>PM: early resume of devices complete after 0.626 msecs
  1601. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  1602. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  1603. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1604. <6>sdhci_resume_host : MMC Card ON
  1605. <4>bcmsdh_sdmmc_resume!Enter
  1606. 44>bcmsdh_sdmmc_resume Enter
  1607. <6>wake disabled for irq 375
  1608. <7>[keys]PWR 0
  1609. <6>wake disabled for irq 381
  1610. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  1611. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  1612. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  1613. <6>sec_jack_resume: disable_irq_wake(0)
  1614. <6>wake disabled for irq 359
  1615. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  1616. <6>mif: set hsic lpa phy init: slave wake-up (1)
  1617. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  1618. <4>usb usb1: root hub lost power or was reset
  1619. <3>[MODEM_IF]Active States =1, s5p-ehci
  1620. <7>pmu_debug: 0x00000900
  1621. <6>mif: usb_port_resume: 1281, 0
  1622. <6>usb 1-2: reset `igh speed USB device number 3 using s5p-ehci
  1623. <6>mif: link_pm_irq_handler: ignore request by suspending
  1624. <6>mif: link_pm_runtime_start: rpm_status: 0
  1625. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  1626. <6>PM: resume of devices complete after 482.295 msecs
  1627. <6>mif: iodev_netif_wake: rmnet0
  1628. <6>mif: iodev_netif_wake: rmnet1
  1629. <6>mif: iodev_netif_wake: rmnet2
  1630. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  1631. <6>mif: iodev_netif_wake: rmnet0
  1632. <6>mif: iodev_netif_wake: rmnet1
  1633. <6>mif: iodev_netif_wake: rmnet2
  1634. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  1635. <4>REstarting tasks ...
  1636. <4>temperAture code is in anaccurate -->check if vdd_18_ts is on
  1637. <4>or surrounding temp is low.
  1638. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  1639. <6>normal: free cpufreq_limit & interrupt enable.
  1640.  4>done.
  1641. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  1642. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  1643. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  1644. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:53:57.321945152 UTC)
  1645. <6>active wake lock power-supply
  1646. <6>active wake lock l2_hsic
  1647. <6>suspend: abort suspend
  1648. <6>wake lock l2_hsic, expired
  1649. <6>suspend: enter suspend
  1650. <6>suspend: enter suspend, (2013-04-21 08:53:57.556559558 UTC)
  1651. <6>PM: Syncing filesystems ... done.
  1652. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  1653. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1654. <4>Suspending console(s) (use no_console_suspend to debug)
  1655. <7>pmu_debug: 0x00000901
  1656. <7>xusbxti_control: 0
  1657. <3>[EODEM_IF]Active States =0, s5p-ehci
  1658. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:53:58
  1659. <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returnq -16
  1660. <3>PM: Device alare failed to suspend: error -16
  1661. <3>PM: Some devices failed to suspend
  1662. <7>mIf: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  1663. <6>[MODEM_IF]Slave Wake
  1664. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  1665. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  1666. <6>max8997 5-0066: max8997_irq_thread: irq:351, irq_src:0x0
  1667. <4>max8997 5-0066: Unused interrupt source: 0x0
  1668. <6>mif: set hsic lpa phy init: slave wake-up (1)
  1669. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  1670. <4>usB usb1: root hub lost power or was reset
  1671. <3>[MODEM_IF]Active States =1, s5p-ehci
  1672. <6>mif: link_pm_irq_h`ndler: ignore request by suspending
  1673. <7>pmu_debug: 0x00000900
  1674. <6>mif: usb_port_resume: 1281, 0
  1675. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  1676. <6>mif: link_pm_irq_handler: ignorE request by Suspending
  1677. <6<mif: link_pm_runtime_start: rpm_status: 0
  1678. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  1679. <6>PM: resume of devices complete after 312.008 msecs
  1680. <4>Restarting tasks ... done.
  1681. <6>suspend: exit suspend, ret = -16 (2013-04-21 08:53:58.024061170 UTC)
  1682. <6>suspend: enter suspend
  1683. <6>suspend: enter suspend, (2013-04-21 08:53:59.706453439 UTC)
  1684. <6>PM: Syncing filesystems ... done.
  1685. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  1686. <4>Freezing remaining &reezable tasks ... (elapsed 0.01 seconds) done.
  1687. <4>Suspending console(s) (use no_console_suspend to debug)
  1688. <7>pmu_debug: 0x00000901
  1689. <7>xusbxti_control: 0
  1690. <3>[MODEM_IF]Active States =0, s5p-ehci
  1691. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 08:54:06
  1692. <6>wake enabled for irq 359
  1693. <6>sec_jack_suspeld: enable_irq_wake(0)
  1694. <6>s5p_int_src_ext_hpd()
  1695. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  1696. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  1697. <6>sake enabled for irq 375
  1698. <6>wake enabled for irq 381
  1699. <6>sdhci_suspend_host : Enter WIFI suspend
  1700. <4>bcmsdh_sdmmc_suspend Enter
  1701. <6>sdhci_suspend_host : MMC Card OFF
  1702. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  1703. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  1704. <6>PM; suspend of devices complete af4er 230.556 msecs
  1705. <4>suspend_seT_state: LED_A_2.8V: No configuration
  1706. <6>PM: late suspend of devices complete after 0.540 msecs
  1707. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  1708. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  1709. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  1710. <7>platforM_pm_suspend_noirq: s3c2440-i2c.6-
  1711. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  1712. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  1713. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  1714. <7>platform_pm_suspend_noirq: s3c2440-i2#.3-
  1715. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  1716. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  1717. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  1718. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  1719. <7>platform_pm_suspend_noirq: power.0+
  1720. <6>power_suspend_late return 0
  1721. <7>platform_pm_suspend_noirq: Power.0-
  1722. <6>PM: noirq suspend of devices complete after 1.295 msecs
  1723. <4>Disabling non-boot CPUs ...
  1724. <1>PM: SLEEP
  1725. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  1726. <6>WAKEUP_STAT: 0x80000001
  1727. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  1728. <6>Resume caused by IRQ 359, max8997-irq
  1729. <6>PM: joirq resume of devices complete after 1.303 msecs
  1730. <3>calc_bus_utilization: 0 value is not permitted
  1731. <3>calc_bus_utilization: 0 value is not permitted
  1732. <6>PM: early resume of devices complete after 0.823 msecs
  1733. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  1734. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  1735. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1736. <6>sdhci_resume_hos4 : MMC Card ON
  1737. <6>wakeup wake lock: alarm
  1738. <4>bcmsdh_sdmmc_resuma Enter
  1739. <4>bcmsdh_sdmmc_resume Enter
  1740. <6>wake disabled for irq 375
  1741. <7>[keys]PWR 0
  1742. <6>wake disabled for irq 381
  1743. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  1744. <6>audss_reg_restore: SRCS0x1], DIV[0xf11], GATE[0x42]
  1745. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  1746. <6>sec_jack_resume: disable_irq_wake(0)
  1747. <6>wake disabled for irq 359
  1748. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  1749. <6>max8997-rtc max8997-rtc: max8997_rtc_a,arm_irq:irq(437)
  1750. <6>max89 7 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  1751. <4>max8997 5-0066: Unused interrupt source: 0x0
  1752. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  1753. <6>[MODEM_IF]Slave Wake
  1754. <6>mif: set hsic lpa phy init: slave wake-up (1)
  1755. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  1756. <4>usb usb1: root hub lost power or was reset
  1757. <3>[MODEM_IF]AcTive States =1, s5p-ehci
  1758. <7>pmu_debug: 0x00000900
  1759. <6>mif: link_pm_irq_handler: ignore request by suspending
  1760. <6>mif: usb_port_resume: 1281, 0
  1761. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  1762. <6>mif; link_pm_irq_handler: ignore request by suspending
  1763. <6>mif: link_pm_runtime_start: rpm_status: 0
  1764. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  1765. <6>mif: iodev_netif_wake: rmnet0
  1766. <6>mif: iodev_netif_wake: rmnet1
  1767. <6>mif: iodev_netif_wake: 2mnet2
  1768. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  1769. <6>PM: resume of devices complete after 495.985 msecs
  1770. <4>Restarting tasks ...
  1771. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  1772. <4>or surrounding temp is low.
  1773. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  1774. <6>normal: free cpufreq_limit & interrupt enable.
  1775. <4>done.
  1776. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  1777. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  1778. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  1779. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:54:06.332062406 UTC)
  1780. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  1781. <4>or surrounding temp is low.
  1782. <6>s5p-ehci s5p-ehci: host_phy_susp
  1783. <7>mif: set_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x11c/0x184):
  1784. <6>mif: set hsic lpa enter: active state (0), pda active (0)
  1785. <6>active wake lock wlan_rx_wake, time left 270
  1786. <6>suspend: abort suspend
  1787. <6>wake lock wnan_rx_wake, expired
  1788. <6>suspend: enter suspend
  1789. <6>suspend: enter suspend, (2013-04-21 08:54:08.669242018 UTC)
  1790. <6>PM: Syncing filesystems ... done.
  1791. <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot
  1792. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  1793. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1794. <4>Suspending console(s) (use no_console_suspend to debug)
  1795. <7>pmu_debug: 0x00000901
  1796. <7>xusbxti_control  0
  1797. <3>[MODEM_IF]Active States =0, s5p-ehci
  1798. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:09:03
  1799. <6>wake enabled for irq 359
  1800. <6>sec_jack_suspend: enable_irq_wake(0)
  1801. <6>s5p_int_src_ext_hpd()
  1802. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  1803. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  1804. <6>wake enabled for irq 375
  1805. <6>wake enabled for irq 381
  1806. <6>sdhci_suspend_host : Enter WIFI suspend
  1807. <4>bcmsdh_sdmmc_suspend Enter
  1808. <6>sdhci_suspend_host : MMC Card OFF
  1809. <6>u1_enable_regulator_for_usb_mipi: disable LDO3
  1810. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  1811. <6>PM: suspend of devices complete after 227.256 msecs
  1812. <4>suspend_set_state: LED_A_2.8V: No configuration
  1813. <6>PM: late suspend of devices complete after 0.535 msecs
  1814. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  1815. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  1816. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  1817. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  1818. <7>platform_pm_suspend_noirq: s3c2440%i2c.5+
  1819. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  1820. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  1821. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  1822. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  1823. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  1824. <7>platform_pm_suspend_noirq: s3c2440)i2c.0+
  1825. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  1826. <7>platform_pm_suspend_noirq: power.0+
  1827. <6>power_suspend_late return 0
  1828. <7>platform_pm_suspend_noirq: power.0-
  1829. <6>PM: noirq suspend of devices complete after 1.280 msecs
  1830. <4>Disabling non-boot CPUs ...
  1831. <1>PM: SLEEP
  1832. <1>ARM_COREx_STATUS CGRE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  1833. <6>WAKEUP_STAT: 0x8 000001
  1834. <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0
  1835. <6>Resume caused by IRQ 361, hostwake
  1836. <6>mif: link_pm_irq_handler: ignore request by suspending
  1837. <6>wake0p wake lo#k: l2_hsic
  1838. <6>PM: noirq resume of devices complete after 1.302 msecs
  1839. <3>calc_bus_utilization: 0 value is not permitted
  1840. <3>calc_bus_utilization: 0 value is not permitted
  1841. <6>PM: early resume of devices complete after 0.833 msecs
  1842. <6>u1_enable_regulator_for_usb_mipi: enable LDOr
  1843. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  1844. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1845. <6>sdhci_resume_host : MMC Card ON
  1846. <4>bcmsdh_sdmmc_resume Enter
  1847. <4>bcmsdh_sdmmc_resume Enter
  1848. <6>wake disabled for irq 375
  1849. <7>[keys]PWR 0
  1850. <6>wake disabled for irq 381
  1851. <6>s3c-rtc e8ynos-rtc: rtc dIsabled, re-enabling
  1852. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  1853. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  1854. <6>sec_jack_resume: disable_irq_wake(0)
  1855. <6>wake disabled for irq 359
  1856. <7>mif: set_hsic_lpa_qtates: 279: called(s5p_tsb_phy_init+0x128/0x564):
  1857. <6>mif: set hsic lpa phy init: slave wake-up (1)
  1858. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  1859. <4>usb usb1: root hub lost power or was reset
  1860. <3>[MODEM_IF]Active States =1, s5p-ehci
  1861. <7:pmu_debug: 0x00000900
  1862. <6>mif: usb_port_resume: 1281, 0
  1863. <6>uqb 1-2: reset hig( speed USB device number 3 using s5p-ehci
  1864. <6>mif: link_pm_irq_handler: ignore request by suspending
  1865. <6>mif: link_pm_runtime_start: rpm_status: 0
  1866. <6>-if: link_pm_runtime_3tart: EHCI runtime s5p-ehci, s5p-ehci
  1867. <6>PM: resume of devices complete after 478.866 msecs
  1868. <6>mif: iodev_netif_wake: rmnet0
  1869. <6>mif: iodev_netif_wake: rmnet1
  1870. <6>mif: iodev_netif_wake: rmnet2
  1871. <6>mif: link_rx_flowctl_cmd: fLowctl CMD_RESUME(00CB)
  1872. <6>mif: iodev_n%tif_wake: rmnet0
  1873. <6>mif: iodev_netif_7ake: rmnet!
  1874. <6>mif: iodev_netif_wake: rmnet2
  1875. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  1876. <4>Restarting tasks ...
  1877. <4>temperature code is in inaccurate -->check if vdd_18_ts is nn
  1878. <4>or surrounding temp is low&
  1879. <6>notify_change_of_tmu_state: uevent: 0, nama = TMUSTATE=0
  1880. <6>normal: free cpufreq_limit & interrupt enable.
  1881. <4>done.
  1882. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  1883. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  1884. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  1885. <6>suspend: exit suspend, ret = 0 (2013-04-21 08:54:09.438719686 UTC)
  1886. <6>wake lock l2_hsic, expired
  1887. <6>suspend: enter suspend
  1888. <6>suspend: enter suspend, (2013-04-21 08:54:09.673352659 UT )
  1889. <6>PM: Syncin' filesystems ... done.
  1890. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  1891. <4>Freezing remaining freezable tasks ... (elapSed 0.01!seconds) done.
  1892. <4>Suspending console(s) (use no_console_suspend to debug)
  1893. <7>pmu_debug: 0x00000901
  1894. <7>xusbxti_control: 0
  1895. <3>[MODEM_IF]Active States =0, s5p-ehci
  1896. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:09:02
  1897. <6>wake enabled for irq 359
  1898. <6>sec_jack_suspend: enable¬irq_wake(0)
  1899. <6>s5p_inu_src_ext_ipd()
  1900. <6>au$ss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  1901. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  1902. <6>wake enabled for irq 375
  1903. <6>wake enabled for irq 381
  1904. <6>sdhci_suspend_host : Enter WIFI suspend
  1905. <6>bcmsdh_sdmmc_suspend Enter
  1906. <6>sdhci_suspend_host : MMC Card OFF
  1907. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  1908. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  1909. <6>PM: suspend of devices complete after 250.544 msecs
  1910. <4>suspend_set_state: LED_A_2.8V: No configuration
  1911. <6>PM: late suspend of devices complete after 0.579 msecs
  1912. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  1913. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  1914. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  1915. <7 platform_pm_suspend_noirq: s3c2440-i2c.6-
  1916. <7>platform_pm_suspenf_noirq: s3c2440-i2c.5+
  1917. <7>platform_pm_suspen$_noirq: s3c2440-i2c.5-
  1918. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  1919. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  1920. <7>platform_pm_suspend_joirq: s3c24$0-i2c.1+
  1921. <7>platform_pm_suspend_noirq: s3c2440-i2c&1-
  1922. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  1923. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  1924. <7>platform_pm_suspend_noirq: power.0+
  1925. <6>power_suspend_late return 0
  1926. <7>platform_pm_suspend_noirq: bower.0-
  1927. <6>PM: .oirq suspeod of devices completE after 1.263 msecs
  1928. <4>Disabling non-boot CPUs ...
  1929. <1>PM: SLEEP
  1930. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  1931. <6>WAKEUP_STAT: 0x80000001
  1932. <6>WAKEUP_INTx_PEND: 0x10, 0x0, 0x0, 0x0
  1933. <6>Resume caused by IRQ 356, mxt224_ts
  1934. <6>PM: noirq resume of d%Vices complete after 1.298 msecs
  1935. <3>calc_bus_utilization: 0 value is not permitted
  1936. <3>calc_bus_utilization: 0 value is not permitted
  1937. <6>wakeup wake lock: event2-2618
  1938. <6>CPUFreq is already fix%d
  1939. <6>PM: early resume of devices complete!after 0.818 msecs
  1940. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  1941. <6>exynos4_satup_mshci_set_power : internal MMC Card ON samsung-mshc.
  1942. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  1943. <6>sdhci_resume_host : MMC Card ON
  1944. <4>bcmsdh_sdmmc_resume Enter
  1945. <4>bcmsdh_sdmmc_resume Enter
  1946. <6>wake disabled for irq 375
  1947. <7>[keys]PWR 0
  1948. <6>wake disabled for irq 381
  1949. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  1950. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  1951. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  1952. <6>sec_jack_reswme: disable_irq_wake(0)
  1953. <6>wake disabled for irq 359
  1954. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  1955. <6>[MODEM_IF]Slave Wake
  1956. <6>mif: set hsic lpa phy init: slave wake-up (1)
  1957. <6>s5p-ehci s5p-ehci: usb phy usag%(2)
  1958. <4>usb usb1: root hub lost power or was reset
  1959. <3>[MODEM_IF]Active States =1, s5p-ehci
  1960. <7>pmu_debug: 0x00000900
  1961. <6>mif: link_pm_irq_handler: ignore request by suspending
  1962. <6>mif: usb_port_resume: 1281, 0
  1963. <6>usb 1-2: reset high 3peed USB devic% oumber 3 using s5p-ehca
  1964. <6>mif: link_pm_irq_handler: ignore request by suspending
  1965. <6>mif: link_pm_runtime_start: rpm_status: 0
  1966. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  1967. <6>PM: resume of devices complete after 491/842 msecs
  1968. <6>mif: iodev_netif_wake: rmnet0
  1969. <6>mif: iodev_netif_wake: rmnet1
  1970. <6>mif: iodev_netif_wake: rmnet2
  1971. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  1972. <4>Restarting tasks ...
  1973. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  1974. <4>or su2rounding pemp is low.
  1975. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  1976. <6>normal: free cpufreq_limit & interrupt enable.
  1977. <4>done.
  1978. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  1979. <6>sec-battery sec-battery: sec_bat_cha2ging_time_management: charging_start_time has never been used since initializing
  1980. <6>mah8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  1981. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:02:13.328569243 UTC)
  1982. <6>active wake lock power-supply
  1983. <6>active wake lock l2_hsic
  1984. <6>active wake lock event1-2618
  1985. <6>active wake lock event2-2618
  1986. <6>active wake lock slide2wake, time left 490
  1987. <6>active wake lock alarm, time left 1403
  1988. <6>suspend: abort suspend
  1989. <6>s3cfb s3cfb.0: +s3cfb_late_resume
  1990. <6>s3cfb s3cfb.0: fimd sclk rate 50000000, cdkdiv 0x7000ff
  1991. <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
  1992. <6>mdnie mdnie: CAMERA
  1993. <6>s3cfb s3cfb.0: -s3cfb_late_resume
  1994. <6>lcd panel: +ld9040_late_resume
  1995. <6>lcd panel: ld9040_power_on
  1996. <6>k3dh_ioctl: opened = 0, enable = 1
  1997. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  1998. <6>lcd panel: -ld9040_late_resume
  1999. <6>mdnie mdnie: +mdnie_late_resume
  2000. <6>mdnie mdnie: CAMERA
  2001. <6>mdnie mdnie: -mdnie_late_resume
  2002. <6>sii9234_late_resume()
  2003. <4>dhd_late_resume: enter
  2004. <4>dhd_set_suspend: Remove extra suspend setting
  2005. <6>lcd panel: id=0 brightness=48, bl=5, candela=110
  2006. <2>wake disabled for irq 356
  2007. <6>powersave_late_resume: set cpu0 freq in the 200000-600000 KHz range
  2008. <6>powersave_late_resume: set cpu1 freq in the 200000-600000 KHz range
  2009. <7>[TouchKey] sec_touchkey_late_resume
  2010. <6>s5p_gpioint_set_type irq:389 is at GPL0(5)
  2011. <3>** Up_Threchold is changed to 25 **
  2012. <6>mif: usb_port_resume: 1283, 4
  2013. <6>[VIB] pwm_val_store: pwm_val=100
  2014. <6>[VIB] pwm_val_store: pwm_duty=37640
  2015. <7>wlan0: no IPv6 routers present
  2016. <6>s5p-ehci s5p-ehci: host_phy_susp
  2017. <6>mif: usb_port_resume: 1283, 4
  2018. <3>** Ep_Threshold is changed to 25 **
  2019. <6>s5p-ehci s5p-ehci: host_phy_susp
  2020. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  2021. <7>[TouchKey] sec_touchkey_early_suspend
  2022. <6>powersave_early_suspend: set cpu0 freq in the 200000-0400000 KHz range
  2023. <6>powersave_early_suspend: set cpu1 freq in the 200000-1400000 KHz range
  2024. <6>wake enabled for irq 356
  2025. <4>dhd_early_suspend: enter
  2026. <4>dhd_set_suspend: force extra Suspend setting
  2027. <6>k3dh_ioctl: opened = 1, enable = 0
  2028. <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
  2029. <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10
  2030. <6>sii9234_early_suspend()
  2031. <6>mdnie mdnie: +mdnie_early_suspend
  2032. <6>mdnie mdnie: -mdnie_early_suspend
  2033. <6>lcd panel: +ld9040_early_suspend
  2034. <6>lcd panel: ld9040_power_off
  2035. <6>lcd panel: -ld9040_early_suspend
  2036. <6>+s3cfb_early_suspend
  2037. <7>s3cfb - disable power domain
  2038. <6>-s3cfb_early_suspend
  2039. <6>active wake lock PowerManagerService.Broadcasts
  2040. <6>rync_system +
  2041. <6>maf2 usb_port_resume: 1083, 4
  2042. <6>sync_system -
  2043. <6>suspend: enter suspend
  2044. <6>suspend: enter suspend, (2013-04-21 09:02:20.312415150 UTC)
  2045. <6>PM: Syncing filesystems ... done.
  2046. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  2047. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) dona.
  2048. <4>Suspending console(s) (use no_console_suspend to debug)
  2049. <7>pmu_debug: 0x00000901
  2050. <7>xusbxti_control: 0
  2051. <3>[MODEM_IF]Active States =0, s5p-ehci
  2052. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:02:34
  2053. <6>wake enabled for irq 359
  2054. <6>sec_jack_suspend: enable^irq_wake(0)
  2055. <6>s5p_int_src_ext_hpd()
  2056. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  2057. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  2058. <6>wake enabled for irq 375
  2059. <6>wake enabled for irq 381
  2060. <6>sdhcI_suspend_host : Enter WIFI suspend
  2061. <4>bcmsdh_sdmmc_suspend Enter
  2062. <6>sdhci_suspend_host : MMC Card OFF
  2063. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  2064. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <6>PM: suspend of devices complete after 250.543 msecs
  2065. <4>suspend_set_state: LED_A_2.8V: No configuration
  2066. <6>PM: late suspend of devices complete after 0.566 msecs
  2067. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  2068. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  2069. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  2070. <7>platform_pm_suspeJd_noirq: s3c2440-i2c.6-
  2071. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  2072. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  2073. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  2074. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  2075. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  2076. <7>platform_pm_sucpend_noirq: s3c2440-i2c.1-
  2077. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  2078. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  2079. <7>platform_pm_suspend_noirq: power.0+
  2080. <6>power_suspend_lAte return 0
  2081. <7>platform_pm_suspend_noirq: power.0-
  2082. <6>PM: noirq suspend of devices complete after 1.282 msecs
  2083. <4>Disabling non-boot CPUs ...
  2084. <1>PM: SLEEP
  2085. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  2086. <6>WAKEUP_STAT: 0x80000001
  2087. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  2088. <6>Resume caused by IRQ 359, max8997-irq
  2089. <6>PM: noirq resume of devices complete after 1.302 msecs
  2090. <3>calc_bus_utilization: 0 value is not permitted
  2091. <3>calc_bus_utilization: 0 value is not permitted
  2092. <6>P
  2093. : early res5me of devices complete after 0.629 msecs
  2094. <6>u1_enable_refulator_for_usb_mipi: enable LDOs
  2095. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  2096. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  2097. <6>sdhci_resume_host : MMC Card ON
  2098. <4>bcmsdh_sdmmc_resume Enter
  2099. <4>bcmsdh_sdmmc_resume Enter
  2100. <6?wake disabled for irq 375
  2101. <7>[keys]PWR 0
  2102. <6>wake disabled for irq 381
  2103. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  2104. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  2105. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  2106. <6>wakeup wake lock: sec-battery-monitor
  2107. <6>sec_jack_resume: disable_irq_wake(0)
  2108. <6>wake disabled for irq 359
  2109. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  2110. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  2111. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  2112. <4>max8997 5-0066: Ujused interrupt source: 0x0
  2113. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  2114. <6>[MODEM_IF]Slave Wake
  2115. <6>mif: set hsic lpa phy init: slavE wake-up (1)
  2116. <6>s5p-ehci s5p-ehci: usb phy usage 2)
  2117. <4>usb usb1: root hub lost power or was reset
  2118. <3>[MODEM_IF]Active States =1, s5p-ehci
  2119. <7>pmu_debug: 0x00000900
  2120. <6>mif: link_pm_irq_handler: ignore request by suspending
  2121. <6>mif: usb_port_resume: 1281, 0
  2122. <6>usb 1-2: reset high speed USB device numBer 3 using s5p-ehci
  2123. <6>mif: link_pm_irqOhandler: ignore request by suspending
  2124. <6>mif: link_pm_runtime_start: rpm_status: 0
  2125. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  2126. <6>PM: resume of devices complete after 479.928 msecs
  2127. <6>mif: iodev_netif_wake: rmnet0
  2128. <6>mif: iodev_netif_wake: rmnet1
  2129. <6>mif: iodev_netif_w!ke: rmnet2
  2130. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  2131. <4>Restarting tasks ...
  2132. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2133. <4>or surrounding temp is low.
  2134. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  2135. <6>normal: free cpufreq_limit & interrupt enable.
  2136. <4>done.
  2137. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2138. <6>sec-battery sec-battery: sec_bat_chargkng_time_manageeent: charging_start_time has never been used since i.itializing
  2139. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2140. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:02:34.315402670 UTC)
  2141. <6>wake lock umts_ipc0, expired
  2142. <6>wake lock l2_hsic, expired
  2143. <6>suspend: eo4er suspend
  2144. <6>suspend: enter suspend, (2013-04-21 09:02:35.121682237 UTC)
  2145. <6>PM: Syncing filesystems ... done.
  2146. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  2147. <4>Freezing reeaining freezable tasks ... (elapsed 0.01 seconds) done.
  2148. <4>Suspending console(s) (use no_console_suspend to debug)
  2149. <7>pmu_debug: 0x00000901
  2150. <7>xusbxti_control: 0
  2151. <3>[MODEM_IF]Active States =0, s5p-ehci
  2152. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:03:18
  2153. <6>wake enabled for irq 359
  2154. <6>sec_jack_suspend: enaBle_irq_wake(0)
  2155. <6>s5p_int_src_ext_hpd()
  2156. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  2157. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  2158. <6>wake enabled for irq 375
  2159. <6>wake enabled for irq 381
  2160. <6>sdhci_suspend_host : Enter WIFI suspend
  2161. <4>bcmsdh_sdmmc_suspend Enter
  2162. <6>sdhci_suspend_host : MMC Card OFF
  2163. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  2164. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  2165. <6>PM: suspend of defices complete after 227.305 msecs
  2166. <4>suspend_set_state: LED_A_2
  2167. 8V: No configuration
  2168. <6>PM: late suspend of devices complete after 0.565 msecs
  2169. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  2170. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  2171. <7>platform_pm_suspend_Foirq: s3c2440-i0c.6+
  2172. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  2173. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  2174. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  2175. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  2176. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  2177. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  2178. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  2179. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  2180. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  2181. <7>platform_pm_suspend_noirq: power.0+
  2182. <6>active wake lock wlan_wake
  2183. 46>active wake lock wlan_rx_wake, time left 249
  2184. < >power_suspend_late return -11
  2185. <7>platform_pm^suspend_noirq: power.0-
  2186. <3>dpm_run_callback(): platform_pm_suspend_noirq+0x0/0x8c returns -11
  2187. <3>PM: Device power.0 failed to suspend noirq: error -11
  2188. <6>PM: noirq resume of devices complete after 0.620 msecs
  2189. <6>PM: early suspend of devices coeplete after 0.356 msecs
  2190. <3>PM: Some devices failed to power down
  2191. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  2192. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsu.g-mshc.
  2193. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  2194. <6>sdhci_resume_host : MMC Card ON
  2195. <4>bcmsdh_s`mmc_resume Enter
  2196. <4>bcmsdh_sdmmc_resume Enter
  2197. <6>wake disabled for irq 375
  2198. <7>[keys]PWR 0
  2199. <6>wake disabled for irq 381
  2200. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  2201. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  2202. <6>audss_clk_ena`le(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  2203. <6>sec_jack_resume: disable_irq_wake(0)
  2204. <6>wake disabled for irq 359
  2205. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  2206. <6>[MODEM_IF]Slave Wake
  2207. <6>mif: set hsic lpa phy init: slave wake-Up (1)
  2208. <6>s5p-ehci s5p-ehci: usb phy Usage(2)
  2209. <4>usb usb1: root hub lost power or was reset
  2210. <3>[MODEM_IF]Active States =1, s5p-ehci
  2211. <7>pmu_debug: 0x00000900
  2212. <6>mif: link_pm_irq_handler: ignore request by suspending
  2213. <6>mif: usb_port_resume: 1281, 0
  2214. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  2215. <6>mif: link_pm_irq_handler: ignore request by suspending
  2216. <6>mif: link_pm_runtime_start: rpm_status: 0
  2217. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  2218. <6>PM: resume of devices colplete after 493.778 isecs
  2219. <4:Restarting tasks ...
  2220. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  2221. <4>done.
  2222. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2223. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  2224. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2225. <6>suspend: exit suspend, ret = -11 (2013-04-21 09:02:35.898063254 UTC)
  2226. <6>normal: free cpufreq_limit & interrupt enable.
  2227. <6>active wake lock wlan\rx_wake, time left 300
  2228. <6>suspend: abort suspend
  2229. <3>** Up_Threshold is changed to 50 **
  2230. <3>init: untracked pid 26401 exited
  2231. <3>init: untracked pid 27274 exited
  2232. <6>s5p-ehci s5p-ehci: host_phy_susp
  2233. <7>mif: sdt_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x11c/0x184):
  2234. <6>mif: set hsic lpa enter: active state (0), pda active (0)
  2235. <6>wake lock wlan_rx_wake, expired
  2236. <6>suspend: enter suspend
  2237. <6>suspend: enter suspend, (2013-04-21 09:02:38.436616779 UTC)
  2238. <6>PM: Syncing filesystems ... done.
  2239. <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot
  2240. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  2241. <4>Freezing remaining freezable tasks ... (elapsdd 0.01 seconds) done.
  2242. <4>Suspending console(s) (use no_console_suspend to debug)
  2243. <7>pmu_debug: 0x00000901
  2244. <7>xusbxti_control: 0
  2245. <3>[MODEM_IF]Active States =0, s5p-ehci
  2246. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:03:18
  2247. <6>wake enabled for irq 359
  2248. <6>sec_jack_suspend: enable_irq_wake(0)
  2249. <6>s5p_int_src_ext_hpd()
  2250. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  2251. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  2252. <6>wake enabled for irq 375
  2253. <6>wake enabled for irq 381
  2254. <6>sdhci_suspendWhost : Enter WIFI suspend
  2255. <4>bcmsdh_sdmmc_suspend Enter
  2256. <6>sdhci_suspend_host : MMC Card OFF
  2257. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  2258. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  2259. <6>PM: suspend of devices complete after 250.598 msecs
  2260. <4>suspend_set_state: LED_A_2.8V: No configuration
  2261. <6>PM: late suspend of devices complete after 0.561 msecs
  2262. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  2263. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  2264. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  2265. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  2266. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  2267. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  2268. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  2269. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  2270. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  2271. <7>platfoRm_pm_suspend_noirq: s3c2440-i2c.1-
  2272. <7>platform_rm_suspend_noarq: s3c2440-i2c.0+
  2273. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  2274. <7>platform_pm_suspend_noirq: power.0+
  2275. <6>power_suspend_late return 0
  2276. <7>platform_pm_suspend_noirq: power.0-
  2277. <6>PM: noirq suspend of devices complete after 3.246 msecs
  2278. <4>Disabling non-boot CPUs .+.
  2279. <1>PM: SLEEP
  2280. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  2281. <6>WAKEUP_STAT: 0x80000001
  2282. <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0
  2283. <6>Resume caused by IRQ 361, hostwake
  2284. <6>mif: link_pm_irq_handler: ignore request by suspending
  2285. <6>wakeup wake lock: l2_hsic
  2286. <6>PM: noirq resume of devices complete after 1.301 msecs
  2287. <3>calc_bus_utilization: 0 value is not permitted
  2288. <3>calc_bus_utilization: 0 value is not permitted
  2289. <6>PM: early resume of devices complete after 0.627 msecs
  2290. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  2291. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  2292. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  2293. <6>sdhci_resume_host : MMC Card ON
  2294. <4>bcmsdh_sdmmc_resume Enter
  2295. <4>bcmsdh_sdmmc_resume Enter
  2296. <6>wake disabled for irq 375
  2297. <7>[keys]PWR 0
  2298. <6>wake disabled for irq 381
  2299. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  2300. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  2301. <6>auDss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  2302. <6>sec_jack_resume: disable_irq_wake(0)
  2303. <6>wake disabled for irq 359
  2304. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  2305. <6>mif: set hsic lpa phy init: slave wake-up (1)
  2306. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  2307. <4>usb usb1: roo4 hub lost power or was reset
  2308. <3>[MODEM_IF]ActIve States =1, s5p-ehci
  2309. <7>pmu_debug: 0x00000900
  2310. <6>mif: usb_port_resume: 1281, 0
  2311. <6>usb 1-2: reset high speed USB device number 3 usin' s5p-ehci
  2312. <6>mif: link_pm_irq_handler: ignore request by suspending
  2313. <6>mif: link_pm_runtime_start: rpm_statu3: 0
  2314. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  2315. <6>PM: resume of devices complete after 478.779 msecs
  2316. <6>mif: iodev_netif_wake: rmnet0
  2317. <6>mif: iodev_netif_wake: rmnet1
  2318. <6>mif: iodev_netif_wake: rmnet2
  2319. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  2320. <6>mif: iodev_netif_wake: rmnet0
  2321. <6>mif: iodev_netif_wake: rmnet1
  2322. <6>mif: iodev_netif_wake: rmnet2
  2323. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESU
  2324. E(00CB)
  2325. <4>Restarting tasks ...
  2326. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  2327. <6>normal: free cpufreq_limit & interrupt enable.
  2328. <4>done.
  2329. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2330. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  2331. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2332. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:02:39.318806407 UTC)
  2333. <6>wake lock l2_hsic, expired
  2334. <6>suspend: enter suspend
  2335. <6>suspend: enter suspend, (2013-04-21 09:02:39.553470472 UTC)
  2336. <6>PM: Syncing filesystems ... done.
  2337. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  2338. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2339. <4>Suspending console(s) (use no_console_suspend to debug)
  2340. <7>pmu_debug: 0x00000901
  2341. <7>xusbxti_control: 0
  2342. <3>[MODEM_IF]Active States =0, s5p-ehci
  2343. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:03:18
  2344. <6>wake enabled for irq 359
  2345. <6>sec_jack_suspend: enable_irq_wake(0)
  2346. <6>s5p_int_src_ext_hpd()
  2347. <6>audss_reg_save  SRC[0x1], DIV[0xf11], GATE[0x42]
  2348. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  2349. <6>wake enabled for irq 375
  2350. <6>wake enabled for irq 381
  2351. <6>sdhci_suspend_host : Enter WIFI suspend
  2352. <4>bcmsdh_sdmmc_suspend Enter
  2353. <6>sdhci_suspend_host : MMC Card OFF
  2354. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  2355. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  2356. <6>PM: suspend of devices complete after 250.544 msecs
  2357. <4>suspdnd_set_state: LED_A_2.8V: No configuration
  2358. <6>PM: late suspend of devices complete after 0.562 msecs
  2359. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  2360. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  2361. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  2362. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  2363. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  2364. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  2365. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  2366. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  2367. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  2368. <7>platform_pm_suspend_noirq: s3c2040-i2c.1-
  2369. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  2370. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  2371. <7>platform_pm_suspend_noirq: power.0+
  2372. <6>power_suspend_late return 0
  2373. <7>platform_pm_suspend_noirq: power.0-
  2374. <6>PM: noirq suspend of devices complete after 1.243 msecs
  2375. <4>Disabling non-boot CPUs ...
  2376. <1>PM: SLEEP
  2377. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  2378. <6>WAKEUP_STAT: 0x80000001
  2379. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  2380. <6>Resume caused by IRQ 359, max8997-irq
  2381. <6>PM: noirq resume of devices complete after 1.299 msecs
  2382. <3>calc_bus_utilization: 0 value is not permitted
  2383. <3>calc_bus_utilization: 0 value is not permitted
  2384. <6>PM: early resume of devices complete after 0.821 msecs
  2385. <6>u1_enable_regulator_for_usb_mipi: enable LDMs
  2386. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  2387. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  2388. <6>sdhci_resume_host : MMC Card ON
  2389. <4>bcmsdh_sdmmc_resume Enter
  2390. <4>bcmsdh_sdmmc_resume Enter
  2391. <6>wake disabled for irq 375
  2392. <7>[keys]PWR 0
  2393. <6>wake disabled for irq 381
  2394. <6>s3c-rtc exxnos-rtc: rtc disabled, re-enabling
  2395. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  2396. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  2397. <6>wakeup wake lock: sec-battery-monitor
  2398. <6>sec_jack_resume: disable_irq_wake(0)
  2399. <6>wake disabled for irq 359
  2400. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  2401. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  2402. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  2403. <4>max8997 5-0066: Unused interrupt source: 0x0
  2404. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  2405. <6>[MODEM_IF]Slave Wake
  2406. <6>mif: set hsic lpa phy init: slave wake-up (1)
  2407. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  2408. <4>usb usb1: root hub lost power or was reset
  2409. <3>[MODEM_IF]Active States =1, s5p-ehci
  2410. <6>mif: link_pm_irq_handler: ignore request by suspending
  2411. <7>pmu_debug: 0x00000900
  2412. <6>mif: usb_port_resume: 1281, 0
  2413. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  2414. <6>mif: link_pm_irq_handler2 iglore request by suspending
  2415. <6>mif: link_pm_runtime_start: rpm_status: 0
  2416. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  2417. <6>PM: resume of devices complete after 495.389 msecs
  2418. <6>mif: iodev_netif_wake: rmnet0
  2419. <6>mif: iodev_netif_wake: rmnet1
  2420. <6>mif: iodev_netif_wake: rmnet2
  2421. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  2422. <4>Restarting tasks ...
  2423. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2424. <4>or surrounding temp is low.
  2425. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  2426. <6>normal: free cpufreq_limit & interrupt enable.
  2427. <4>done.
  2428. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2429. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  2430. <6>mAx8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2431. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:03:18.332059367 UTC)
  2432. <6>suspend: enter suspend
  2433. <6>suspend: enter suspend, (20 3-04-2  09:03:18.935084056 UTC)
  2434. <6>PM: Syncing filesystems ... done.
  2435. <4>Freezing user space processes ...
  2436. <6>active wake lock alarm, time left 1497
  2437. <4>
  2438. <3>Freezing of user space  aborted
  2439. <4>
  2440. <4>Restarting tasks ... done.
  2441. <6>suspend: exit suspend, ret = -16 (2013-04-21 09:03:18.94470"552 UTC)
  2442. <6>suspend: enter suspend
  2443. <6>suspen$: enter suspend, (2013-04-21 09:03:19.160667989 UTC)
  2444. <6>PM: Syncing filesystems ... done.
  2445. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  2446. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds+ done.
  2447. <4>Suspending console(s) (use no_console_suspend to debug)
  2448. <7>pmu_debug: 0x00000901
  2449. <7>xusbxti_control: 0
  2450. <3>[MODEM_IF]Active States =0, s5p-ehci
  2451. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:09:02
  2452. <6>wake enabled for irq 359
  2453. <6>sec_jack_suspend: enable_irq_wake(0)
  2454. <6>s5p_int_src_ext_hpd()
  2455. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  2456. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  2457. <6>wake enabled for irq 375
  2458. <6>wake enabled for irq 381
  2459. <6>sdhci_suspend_host : Enter WIFI suspend
  2460. <4>bcmsd`_sdmmc_suspend Enter
  2461. <6>sdhci_suspend_host : MMC Card OFF
  2462. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  2463. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  2464. <6>PM: suspend of devices coiplete after 230.595 msecs
  2465. <4>suspend_set_state: LED_A_2.8V: No configuration
  2466. <6>PM: late suspend of devices complete after 0.562 msecs
  2467. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  2468. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  2469. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  2470. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  2471. <7>platform_pm_s5spe.d_noirq: s3c2440-i2c.5+
  2472. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  2473. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  2474. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  2475. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  2476. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  2477. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  2478. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  2479. <7>platform_pm_suspend_noirq: power.0+
  2480. <6>power_suspend_late return 0
  2481. <7>platform_pm_suspend_noirq: power.0-
  2482. <6>PM: noirq suspend of devices complete after 1.238 msecs
  2483. <4>Disabling non-boot CPUs ...
  2484. <1>PM: SLEEP
  2485. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  2486. <6>WAKEUP_STAT: 0x80000001
  2487. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  2488. <6>Resume caused by IRQ 359, max8997-irq
  2489. <6>PM: noirq re3ume of devices complete after 1.304 msecs
  2490. <3>calc_bus_utilization: 0 value is not permitted
  2491. <3>calc_bus_utilization: 0 value is not permitted
  2492. <6>PM: early resume of devices complete after 0.628 msecs
  2493. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  2494. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  2495. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  2496. <6>sdhci_resume_host : MMC Card ON
  2497. <4>bcmsdh_sdmmc_resume Enter
  2498. <4>bcmsdh_sdmmc_resume Enter
  2499. <6>wake disabled for irq 375
  2500. <7>[keys]PWR 0
  2501. <6>wake disabled for irq 381
  2502. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  2503. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  2504. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  2505. <6>wakeup!wake Lock: sec-battery-monitor
  2506. <6>sec_jack_resume: disable_irq_wake(0)
  2507. <6>wake disabled for irq 359
  2508. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  2509. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  2510. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  2511. <4>max8997 5-0066: Unused interrupt source: 0x0
  2512. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  2513. <6>[MODEM_IF]Slave Wake
  2514. <6>mif: set hsic lpa phy init: slave wake-up (1)
  2515. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  2516. <4>usb usb1: root hub lost power or was reset
  2517. <3>[MODEM_IF]Active States =1, s5p-ehci
  2518. <7>piu_debug: 0x00000900
  2519. <6>mif: link_pm_irq_handler: ignore request by suspending
  2520. <6>mif: usb_port_resume: 1281, 0
  2521. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  2522. <6>mif: link_pm_irq_handler: ignore request by suspending
  2523. <6>mif: link_pm_runtime_start: rpm_status: 0
  2524. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  2525. <6>PM: resume of devices complete after 495.740 msecs
  2526. <6>mif: iodev_netif_wake: rmnet0
  2527. <6>mif: iodev_netif_wake: rmnet1
  2528. <6>mif: iodev_netif_wake: rmnet2
  2529. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  2530. <4>Restarting tasks ...
  2531. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2532. <4>or surrounding temp is low.
  2533. <6>notify_change_gf_tmu_state: uevent: 0, name = TMUSTATE=0
  2534. <6>normal: free cpufreq_limit & interrupt enable.
  2535. <4>done.
  2536. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2537. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been uSed since initializing
  2538. <6>max8922-charger max8922-charger: max8922_is_chabging: charging state = 0x3
  2539. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:09:02.332049276 UTC)
  2540. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2541. <4>or surrounding temp is low.
  2542. <6>s5p-ehci s5p-ehci: host_phy_stsp
  2543. <7>mif: set_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x11c/0x184):
  2544. <6>mif: set hsic lpa enter: active state (0), pda active (0)
  2545. <4>temperature code is in inaccurate -->check if vdd_18¬ts is on
  2546. <4>or surrounding temp is low.
  2547. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2548. <4>or surrounding temp is low.
  2549. <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=230
  2550. <4>temperature code is in inaccura4e -->check if vdd_18_ts is on
  2551. <4>or surrounding temp is low.
  2552. <66sec-battery sec-battdry: sec_bat_check_temper: recovery count = 0
  2553. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  2554. <6>max8920-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2555. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2556. <4>or surrounding temp is low.
  2557. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2558. <4>or surrounding temp is low.
  2559. <6>sec,thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=240
  2560. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2561. <4>or surrounding temp is low.
  2562. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2563. <4>or surrounding temp is low.
  2564. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2565. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  2566. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2567. <4>temperature code is in inaccurata -->check if vdd_18_ts is on
  2568. <4>or surrounding temp is low.
  2569. <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=250
  2570. <4>temperapure code is in inaccurate -->check if vdd_18_ts i3 on
  2571. <4>or surrounding temp is low.
  2572. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2573. <4>or surrounding temp is low.
  2574. <6>suspend: enter suspend
  2575. <6>suspend: enter suspend, (2013-04-21 09:10:52.  0201018 UTC)
  2576. <6>PM: Syncing fihesyste-s ... done.
  2577. <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot
  2578. <4>Freezing user space processes ...
  2579. <6>active wake lock wlan_rx_wake, time left 202
  2580. <4>
  2581. <3>Freezing of user space  aborted
  2582. <4>
  2583. <4>Restarting tasks ... done.
  2584. <6>mif: link_pm_notifier_event: PDA active low to LPA GPIO state
  2585. <6>suspend: exit suspend, ret = -16 (2013-04-21 09:10:52.090540435 UTC)
  2586. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_resume+0x62c/0x65c):
  2587. <6>mif: set hsic lpa wake: pda active (1)
  2588. <4>usb usb1: root hub lost power or was reset
  2589. <3>[MODEM_IF]Active States =1, s5p-ehci
  2590. <6>mif: usb_port_resume: 1281, 0
  2591. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  2592. <6>mif: link_pm_runtime_start: rpm_status: 0
  2593. <6>mif: link_pm_runtime¬start: EHCI runtime s5p-ehci, s5p-ehci
  2594. <6>mif: iodev_netif_wake: rmnet0
  2595. <6>mif: iodev_netif_wake: rmnet1
  2596. <6>mif: iodev_netif_wake: rmnet2
  2597. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  2598. <6>wake lock wlan_rx_wake, expired
  2599. <6>wake lock l2_hsic, expired
  2600. <6>suspend: enter suspend
  2601. <6>sucpend: enter suspend, (2013-04-21 09:10:52.763382630 UTC)
  2602. <6>PM: Syncing filesystems ... done.
  2603. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  2604. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2605. <4>SuspeNding console(s) (use no_console_suspend to debug)
  2606. <7>pmu_debug:"0x00000901
  2607. <7>xusbxti_control: 0
  2608. <3>[MODEM_IF]Active States =0, s5p-ehci
  2609. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:17:07
  2610. <6>wake enabled for irq 359
  2611. <6>sec_jack_suspend: enable_irq_wake(0)
  2612. <6>s5p_int_src_ext_hpd()
  2613. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  2614. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  2615. <6>wake enabled for irq 375
  2616. <6>wake enabled for irq 381
  2617. <6>sdhci_suspend_host : Entes WIFI suspend
  2618. <4 bcmsdh_sdmmc_suspend Enter
  2619. <6>sdhci_suspend¬host : MMC Card OFF
  2620. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  2621. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  2622. <6>PM: suspend of devices complete a&ter 230.542 msecs
  2623. <4>suspend_set_state: LED_A_2.8V: No configuration
  2624. <6>PM: late suspend of devices complete !fter 0.564 msecs
  2625. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  2626. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  2627. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  2628. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  2629. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  2630. <76platform_pm_suspend_noirq: s3c2440-i2c.5-
  2631. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  2632. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  2633. <7>platform_pm_suspend_noirq* s3c2440-i2c.1+
  2634. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  2635. <7>platform_pm_sus end_noirq: s3c2440-i2c.0+
  2636. <7>pmatform_pm_suspend_noirq: s3c2440-i2c.0-
  2637. <7>platform_pm_suspend_noirq: power.0+
  2638. <6>power_suspend_late return 0
  2639. <7>platform_pm_suspend_noirq: power.0-
  2640. <6>PM: noirq suspend of Devices complete after 1.257 msecs
  2641. <4 Disabling non-boot CPUs ...
  2642. <1>PM: SLEEP
  2643. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  2644. <6>WAKEUP_STAT: 0x80000001
  2645. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0
  2646. <6>Resume caused by IRQ 373, bcmsdh_sdm-c
  2647. <6>PM: noirq resume of devices complete after 1.298 msecs
  2648. <6>wakeup wake lock: wlan_wake
  2649. <3>calc_bus_utilization: 0 value is not permitted
  2650. <3>calc_bus_utilization: 0 value is not permitted
  2651. <6>PM: early resume of devices coMplete after 0.627 msecs
  2652. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  2653. <6>axynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  2654. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  2655. <6>sdhci_resume_host : MMC Card ON
  2656. <4>bcmsdh_sfmmc_resume Enter
  2657. <4>bcmsdh_sdmmc_resume Enteb
  2658. <6>wake disabled for irq 375
  2659. <7>[keys]PWR 0
  2660. <6>wake disabled &or irq 381
  2661. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  2662. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  2663. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  2664. <6>sec_jack_resume: disable_irQ_wake(0)
  2665. <6>wake disabled for irq 359
  2666. <7>mif: set_hsi#_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  2667. <6>[MODEM_IF]Slave Wake
  2668. <6>mif: set hsic lpa phy init: slave wake-up (1)
  2669. <6>s5p-ehci s5p-ehci: usb"phy usage(2)
  2670. <4>usb usb1: root hub lost power or was reset
  2671. <3>[MODEM_IF]Active States =1, s5p-ehci
  2672. <7>pmu_debug: 0x00000900
  2673. <6>mif: link_pm_irq_handler: ignore request by suspending
  2674. <6>mif: usb_port_resume: 1281, 0
  2675. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  2676. <6>mif: li.k_pm_irq_handler: ignore request by suspending
  2677. <6>mif: link_pm_runtime_start: rpm_status: 0
  2678. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  2679. <6>PM: resume of devices complete after 485.249 msecs
  2680. <6?mif: iodev_oetif_wake: rmnet0
  2681. <6>mif: iodev_netif_wake: rmnet1
  2682. <6>mif: iodev_netif_wake: rmnet2
  2683. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  2684. <4>Restarting tasks ...
  2685. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2686. <4>or surrounding temp is low*
  2687. <4>temperature code is in inaccurate -->ch%ck if vdd_18_ts is on
  2688. <4>or surrou.ding temp is low.
  2689. <6>no4i&y_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  2690. <6>normal: free cpufreq_limit & interrupt enable.
  2691. <4>done.
  2692. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2693. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  2694. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2695. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:10:58.315302923 UTC)
  2696. <6>7ake lock wlan_rx_wake, expired
  2697. <6>wake lock l2_hsic, expired
  2698. <6>suspend: enter suspend
  2699. <6>suspend: enter suspend, (2013-04-21 09:10:59.169195908 UTC)
  2700. <6>PM: Syncing filesystems ... done.
  2701. <4>Freezing user spaCe processes ... (elapsed 0.01 seconds) done.
  2702. <4>Freezing remaining freezable tarks ... (elapsed 0.01 seconds) done.
  2703. <4>Suspending console(s) (use no_console_suspend to debug)
  2704. <7>pmu_debug: 0x00000901
  2705. <7>xusbxti_control: 0
  2706. <3>[MODEM_IF]Acti6e States =0, s5p-ehci
  2707. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:17:07
  2708. <6>wake enabled for irq 359
  2709. <6>sec_jack_suspend: enable_irq_wake(0)
  2710. <6>s5p_int_src_ext_hpd()
  2711. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  2712. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  2713. <6>wake enabled for irq 375
  2714. <6>wake enabled &or irq 381
  2715. <6>sdhci_suspend_host : Enter WIFI suspend
  2716. <4>bcmsdh_sdmmc_suspend Enter
  2717. <6>sdhci_suspend_host : MMC Card OFF
  2718. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  2719. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung,mshc.
  2720. <6>PM: susPend of devices complete after 250.553 msecs
  2721. <4>suspend_set_state: LED_A_2.8V: No configuration
  2722. <6>PM: late suspend of devices complete after 0.568 msecs
  2723. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  2724. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  2725. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  2726. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  2727. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  2728. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  2729. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  2730. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  2731. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  2732. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  2733. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  2734. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  2735. <7>platform_pm_suspend_noirq: power.0+
  2736. <6>power_suspend_late return 0
  2737. <7>platform_pm_suspend_noirq: power.0-
  2738. <6>PM: noirq suspend of devices complete after 1.263 msecs
  2739. <4>Disabling non-boot CPUs ...
  2740. <1>PM: SLEEP
  2741. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  2742. <6>WAKEUP_STAT: 0x80000001
  2743. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  2744. <6>Resume caused by IRQ 359, max8997-irq
  2745. <6>PM: noirq resume of devices complete after 1.300 msecs
  2746. <3>calc_bus_utilization: 0 value is not permitted
  2747. <3>calc_bus_utilization: 0 value is not permitted
  2748. <6>PM: early resume of devices complete after 0.821 msecs
  2749. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  2750. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  2751. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  2752. <6>sdhci_resume_host : MMC Card ON
  2753. <4>bcmsdh_sdmmc_re3ume Enter
  2754. <4>bcmsdh_sdmmc_resume Enter
  2755. <6>wake disabled for irq 375
  2756. <7>[keys]PWR 0
  2757. <6>wake disabled for irq 381
  2758. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  2759. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  2760. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  2761. < >wakeup wake lock: sec-battery-monitor
  2762. <6>sec_jack_resume: disable_irq_wake(0)
  2763. <6>wake disabled for irq 359
  2764. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  2765. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  2766. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  2767. <4>max8997 5-0066: Unused interrupt source: 0x0
  2768. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  2769. <6>[MOD M_IF]Slave Wake
  2770. <6>mif: set hsic lpa phy init: slave wake-up (1)
  2771. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  2772. <4>usb usb1: root hub lost power or was reset
  2773. <3>[MODEM_IF]Active States =1, s5p-ehci
  2774. <7>pmu_debug: 0x00000900
  2775. <6>mif: link_pm_irq_handler: ignore request by suspending
  2776. <6>mif: usb_port_resume: 1281, 0
  2777. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  2778. <6>mif: link_pm_irq_handler: ignore request by suspending
  2779. <6>mif: link_pm_runtime_start: rpm_status: 0
  2780. <6>mif: link_pm_runtime_start: EHCI ruNtime s5p-ehci, s5p-ehci
  2781. <6>PM: resume of devices complete after 492.271 msecs
  2782. <6>mif: iodev_netif_wake: rmnet0
  2783. <6>mif: iodev_netif_wake: rmnet1
  2784. <6>mif: iodev_netif_wake: rmnet2
  2785. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  2786. <4>Restarting tasks ...
  2787. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  2788. <4>or surrounding temp is low.
  2789. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  2790. <6>normal: free cpufreq_limit & interrupt enable.
  2791. <4>done.
  2792. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2793. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  2794. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2795. <6>suspend: exit suspend, rgt =!0 (2013-04-21 09:17:07.328721115 UTC)
  2796. <6>suspend: enter suspend
  2797. <6>suspend: ender suspend, (2013-04-21 09:17:08.385871472 UTC)
  2798. <6>PM: Syncing filesystems ... done.
  2799. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  2800. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2801. <4>Suspending console(s) (use no_console_suspend to debug)
  2802. <7>piu_debug: 0x00000901
  2803. <7>xusbxti_control: 0
  2804. <3>[MODEM_IF]Active States =0, s5p-ehci
  2805. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:22:42
  2806. <6>wake enabled for irq 359
  2807. <6>sec_jack_suspend: enable_irq_wake(0)
  2808. <6>s5p_int_src_exu_hpd()
  2809. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  2810. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  2811. <6>wake enabled for irq 375
  2812. <6>wake enabled for irq 381
  2813. <6>sdhci_suspend_host : Enter WIFI suspend
  2814. <4>bcmsdh_sdmmc_suspend Enter
  2815. <6>sdhci_suspend_host : MMC Card OFF
  2816. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  2817. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  2818. <6>PM: suspend of devices complete after 230.551 msecs
  2819. <4>suspend_set_state: LED_A_2.8V: No configuration
  2820. <6>PM: late suspend of devices complete after 0.565 msecs
  2821. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  2822. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  2823. <7>platform_pm_sqspend_noirq: s3c2440-i2c.6+
  2824. <7:platform_pm_sus0end_noirq: s3c2$40-i2c.6-
  2825. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  2826. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  2827. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  2828. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  2829. >7>platform_pm_sucpend_noirq: s3c2440-i2c.1+
  2830. <7>platforM_pm_suspend_noirq: s3c2440-i2c.1-
  2831. <7>plat&orm_pm_suspend_noi2q: s3c2440-i2c.0+
  2832. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  2833. <7>platform_pm_suspend_noirq: power.0+
  2834. <6>power_suspend_late return 0
  2835. <7>platform_pm_suspend_noirq: power.0-
  2836. <6>PM: noirq cuspend of devices complete after 1.263 msecs
  2837. <4>Disabling non-boo4 CPUs ...
  2838. <1>PM: SLEEP
  2839. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  2840. <6>WAKEUP_STAT: 0x80000001
  2841. <6>WAKEUP_INTx_PEND: 0x10, 0x0, 0x0, 0x0
  2842. <6>Resume caused by IRQ 356, ext224_ts
  2843. <6>PM: noirq resume of d%vices comrlete after 1.299 msecs
  2844. <6>wakeup wake lock: event2-2618
  2845. <6>CPUFreq is already fixed
  2846. <6>PM: early resume of devices complete after 0.821 msecs
  2847. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  2848. <3>calc_bus_utilization: 0 valug is not permatted
  2849. <3>calc_bus_utilization: 0 valee is not permitted
  2850. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  2851. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  2852. ,6>sdhci_resume_(ost : MMC Card ON
  2853. <4>bcmsdh_sdmmc_resume Enter
  2854. <4>bcmsdh_sdmmc_resume Enter
  2855. <6>wake disabled for irq 375
  2856. <7>[keys]PWR 0
  2857. <6>wake disabled for irq 381
  2858. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  2859. <6>audss_reg_restore: SRC[0x1], DIV[0xf11]
  2860. GATE[0x42]
  2861. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  2862. <6>sec_ja#k_resume: disacle_irq_wake(0)
  2863. <6>wake disabled for irq 359
  2864. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  2865. <6>[MODEM_IF]Slave Wake
  2866. <6>mif: set hsic lpa phy init: sla6e wake-up (1)
  2867. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  2868. <4>usb usb1: root hub lost power or was reseu
  2869. ,3>[MODEM_IF]Active States =1, s5p-ehci
  2870. <7>pmu_debug: 0x00000900
  2871. <6>mif: link_pm_irq_handler: ignore request by suspending
  2872. <6>mif: usb_port_resume: 1281, 0
  2873. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  2874. <6>mif: link_pm_irq_handler: ignore request by suspending
  2875. <6>mif: link_pm_runtime_start: rpm_status: 0
  2876. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  2877. <6>PM: resume of devices cglplete after 495.356 msecs
  2878. <6>maF: iodev_netif_uake: rmnet0
  2879. <6>mif: igdev_netif_wake: rmnet1
  2880. <6>mif: iodev_netif_wake: rmnet2
  2881. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  2882. <4>Restarting tasks ...
  2883. <4>temperature code is in inaccuraTe -->check if vdd_18_ts is on
  2884. <4>or surrounding temp is low.
  2885. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  2886. <6>normal: free cpufreq_limit & interrupt enable.
  2887. <4>done.
  2888. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2889. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never beef used since initializinc
  2890. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2891. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:18:02.335307991 UTC)
  2892. <6>mif: usb_port_resume: 1283, 4
  2893. <6>wake lock umts_ipc0, expired
  2894. <6>wake lock l2_hsic, expired
  2895. <6>suspend: enter suspend
  2896. <6>suspend: enter suspend, (2013-04-21 09:18:03.648340542 UTC)
  2897. <6>PM: Syncing filesystems ... done.
  2898. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  2899. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  2900. <4>Suspending console(s) (use no_console_suspend to debug)
  2901. <7>pmu_debug: 0x00000901
  2902. <7>xusbxti_control: 0
  2903. <3>[MODEM_IF]Active States =0, s5p-ehci
  2904. <6>max8997-rtc max8997-rtc: max899 _rtc_set_alarm:  013-04-21 09:22:43
  2905. <6>wake enabled for irq 359
  2906. <6>sec_jack_suspend: enable_irq_wake(0)
  2907. <6>s5p_int_src_ext_hpd()
  2908. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  2909. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  2910. <6>wake enabled for irq 375
  2911. <6>waje efabled for irq 381
  2912. <6>sdhci_suspend_host : Enter WIFI suspenD
  2913. <4>bcmsdh_sdmmc_suspend Enter
  2914. <6>sdhci_suspend_host : MMC Card OFF
  2915. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  2916. <6>exynos4_setup_mshci_set_power : interfal MMC C!rd OFF samsung-mshc.
  2917. <6>PM: suspend of devices complete after 250.560 msecs
  2918. <4>suspend_set_state: LED_A_2.8V: No configuration
  2919. <6>PM: late suspend of devices complete after 0.562 msecs
  2920. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  2921. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  2922. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  2923. <7>platform_pm_suspend_noIrq: s3c2440-i2c.6-
  2924. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  2925. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  2926. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  2927. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  2928. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  2929. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  2930. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  2931. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  2932. <7>platform_pm_suspend_noirq: power.0+
  2933. <6>power_suspend_late return 0
  2934. <7>platform_pm_suspend_noirq: power.0-
  2935. <6>PM: noirq suspend of devices complete after 1.251 msecs
  2936. <4>Disabling non-boot CPUs ...
  2937. <1>PM: SLEEP
  2938. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  2939. <6>WAKEUP_STAT: 0x80000001
  2940. <6>WAKEUP_INTx_PEND: 0x10, 0x0, 0x0, 0x0
  2941. <6>Resume caused by IRQ 356, mxt224_ts
  2942. <6>PM: noirq resume of devices complete after 1.301 msecs
  2943. <6>wakeup wake lock: event2-2618
  2944. <6>CPUFreq is already fixed
  2945. <6>PM: early resume of Devices #omplete after 0.823 msecs
  2946. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  2947. <3>calc_bus_utilization: 0 valua is not permitted
  2948. <3>calc_bus_utilization: 0 value is not permitted
  2949. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  2950. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  2951. <6>sdhci_resume_host : MMC Card ON
  2952. <4>bcmsdh_sdmmc_resume Enter
  2953. <4>bcmsdh_sdmmc_resume Enter
  2954. <6>wake disabled for irq 375
  2955. <7>[keys]PWR 0
  2956. <6>wake disabled for irq 381
  2957. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  2958. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GAPE[0x42]
  2959. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  2960. <6>sec_jack_resume: disable_irq_wake(0)
  2961. <6>wake disabled for irq 359
  2962. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  2963. <6>[MODEM_IF]Slave Wake
  2964. <6>mif: set hsic lpa phy init: slave Wake-up (1)
  2965. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  2966. <4>usb usb1: root hub lost power or was reset
  2967. <3>[MODEM_IF]Active States =1, s5p-ehci
  2968. <7>pmu_debug: 0x00000900
  2969. <6>mif: link_pm_irq_handler: ignore request by suspending
  2970. <6>mif: usb_port_resume: 1281, 0
  2971. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  2972. <6>mif: link_pm_irq_handler: ignore request by suspending
  2973. <6>mif: link_pm_runtime_start: rpm_status: 0
  2974. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  2975. <6>PM: resume of devices complete after 478.429 msecs
  2976. <6>mif: iodev_netif_wake: rmnet0
  2977. <6>mif: iodev_netif_wake: rmnet1
  2978. <6>mif: iodev_netif_wake: rmnet2
  2979. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  2980. <4>Restarting tasks ...
  2981. <4>temperature code is in inaccura4e -->check if vdd_18_ts is on
  2982. <4>or surrounding temp is low.
  2983. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  2984. <6>normal: free cpufreq_limit & interrupt enable.
  2985. <4>done.
  2986. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  2987. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  2988. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  2989. <6>suspend: exit suspend, bet = 0 (2013-04-21 09:18:06.315193280 UTC)
  2990. <6>s3cfb s3cfb.0: +s3cfb_late_resume
  2991. <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
  2992. <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
  2993. <6>mdnie mdnie: CAMERA
  2994. <6>s3cfb s3cgb.0: -s3cfb_late_resume
  2995. <6>lcd panel: +ld9040_late_resume
  2996. <6>lcd panel: ld9040_power_on
  2997. <6>k3dh_ioctl: opened = 0, enable = 1
  2998. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  2999. <6>lcd panel: -ld9040_late_resume
  3000. <6>mdnie mdnie: +mdnie_late_resume
  3001. <6>mdnie mdnie: CAMERA
  3002. <6>mdnie mdnie: -mdnie_late_resume
  3003. <6>sii9234_late_resume()
  3004. <4>dhd_late_resuie: enter
  3005. <4>dhd_set_suspend: Remove extra suspend setting
  3006. <6>lcd panel: id=0 brightness=39, bl=5, candela=110
  3007. <3>** Up_Threshold is changed to 25 **
  3008. <6>wake disabled for irq 356
  3009. <6>powersave_late_resume: set cpu0 freq in the 1000000-1400000 KHz range
  3010. <6>powersave_late_resume: set cpu1 freq in the 1000000-1400000 KHz range
  3011. <7>[TouchKey] sec_touchkey_late_resume
  3012. <6>s5p_gpioint_set_type irq:389 is at GPL0(5)
  3013. <6>mif: usb_port_resume: 1283, 4
  3014. <6>[VIB] pwm_val_store: pwm_val=100
  3015. <6>SVIB] pwm_val_store: pwm_duty=37640
  3016. <6>lce panel: id=0 brightness=38, bl=4, candela=100
  3017. <6>s5p-ehci s5p-ehci: host_phy_susp
  3018. <6>mif: usb_port_resume: 1283, 4
  3019. <6>s5p-ehci s5p-ehci: host_phy_susp
  3020. <3>** Up_Threshold is changed to 25 **
  3021. <6>mif: usb_port_resume: 1283, 4
  3022. <6>s5p-ehci s5p-ehci: host_phy_susp
  3023. <6>mif: usb_port_resume: 1283, 4
  3024. <6>mif: usb_port_resume: 1283, 4
  3025. <6>mif: usb_port_resume: 1283, 4
  3026. <6>s5p-ehci s5p-ehci: host_phy_susp
  3027. <6>mif: usb_port_resume: 1283, 4
  3028. <6>mif: usb_port_resume: 1283, 4
  3029. <6>s5p-ehci s5p-ehci: host_phy_susp
  3030. <6>mif: usb_port_resume: 1283, 4
  3031. <6>s5p-ehci s5p-ehci: host_phy_susp
  3032. <6>mif: usb_port_resume: 1283, 4
  3033. <6>mif: usb_port_resume: 1283, 4
  3034. <6>G:P:DmaAddr=@630a0000 Total=16384 RrdSz=4096 #Prds=4 dma_area=0xffdc0000
  3035. <7>i2s_txctrl:Turn on
  3036. <6>mif: usb_port_resume: 1283, 4
  3037. <6>s5p-ehci s5p-ehci: host_phy_susp
  3038. <7>i2s_txctrl: Turn Off - spr is no active
  3039. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3040. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3041. <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=280
  3042. <6>mif: usb_port_resume: 1283, 4
  3043. <6>s5p-ehci s5p-ehci: host_phy_susp
  3044. <6>mif: usb_port_resume: 1283, 4
  3045. <6>s5p-ehci s5p-ehci: host_phy_susp
  3046. <6>mif: usb_port_resume: 1283, 4
  3047. <6>s5p-ehci s5p-ehci: host_phy_susp
  3048. <6>sec-batterY sec-battery: sec_bat_checK_temper: recovery count = 0
  3049. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  3050. <6>max8922-charge2 max8922-charger: max8922_is_charging: charging state = 0x3
  3051. <6>mif: usb_port_resume: 1283, 4
  3052. <6>s5p-ehci s5p-ehci: host_phy_susp
  3053. <6>mif: usb_port_resume: 1283, 4
  3054. <6>s5p-ehci s5p-ehci: host_phy_susp
  3055. <6>mif: usb_port_resume: 1283, 4
  3056. <6>mif: usb_port_resume: 1283, 4
  3057. <6>s5p-ehci c5p-ehci: host_phy_susp
  3058. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  3059. <7>[TouchKey] sec_touchkey_early_suspend
  3060. <6>powersave_early_suspend: set cpu0 freq in the 200000-1400000 KHz range
  3061. <6>powersave_early_suspend: set cpu1 freq in the 200000-140 000 KHz range
  3062. <6>Wake enabled for irq 356
  3063. <4>dhd_early_suspend: enter
  3064. <4>dhd_set_suspend: force extra Suspend setting
  3065. <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
  3066. <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10
  3067. <6>sii9234_early_suspend()
  3068. <6>mdnie mdnie: +mdnie_early_suspend
  3069. <6>mdnie mdnie: -mdnie_early_suspend
  3070. <6>lcd panel: +ld9040_early_suspend
  3071. <6>lcd panel: ld9040_power_off
  3072. <6>k3dh_ioctl: opened = 1, enable = 0
  3073. <6>lcd panel: -ld9040_early_suspend
  3074. <6>+s3cfb_early_suspend
  3075. <7>s3cfb - disable power domain
  3076. <6>-s3cfb_early_suspend
  3077. <6>active wake lock PowerManagerService
  3078. <6>active wake lock PowerManagerService.Broadcasts
  3079. <6>sync_system +
  3080. <6>sync_system -
  3081. <6>mif: usb_port_resume: 1283, 4
  3082. <6>active wake lock umts_ipc0, time left 90
  3083. <6>active wake lock l2_hsic, time left 15
  3084. <6>suspend: abor4 suspend
  3085. <6>mif: usb_port_resume: 1283, 4
  3086. <6>mif: usb_port_resume: 1283, 4
  3087. <3>** Up_Threshold is changed to 50 **
  3088. <6>suspend: enter suspend
  3089. <6>suspend: enter suspend, (2013-04-21 09:18:59.809664323 UTC)
  3090. <&>PM: Syncing filesystems ... done.
  3091. <4>Freezang user space processes ... (elapsed 0.01 seconds) done.
  3092. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  3093. <4>Suspending console(s) (use no_console_suspend to debug)
  3094. <7>pmu_debug: 0x00000901
  3095. <7>xusbxti_control: 0
  3096. <3>[MODEM_IF]Active States =0, s5p-ehci
  3097. <6>m`x8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:19:26
  3098. <6>wake enabled for irq 359
  3099. <6>sec_jack_suspend: enable_irq_wake(0)
  3100. <6>s5p_int¬src_ext_hpd()
  3101. <6>audss_reg_restore: SRC[0x1], DIV[0hf11], GATE[0x42]
  3102. <6>audss_clk_dnable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  3103. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3104. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3105. <6>wake enabled for irq 375
  3106. <6>wake enabled for irq 381
  3107. <6>sdhci_suspend_host : Enter WIFI suspend
  3108. 44>bcmsdh_sdmmc_suspend Enter
  3109. <6>sdhci_suspend_host : MMC Card OFF
  3110. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  3111. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  3112. <6>PM: suspend of devices bomplete after 250.55  msecs
  3113. <4>suspend_set_state: LED_A_2.8V: No configurAtion
  3114. <6>PM: late suspend of devices complete after 0.534 msecs
  3115. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  3116. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  3117. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  3118. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  3119. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  3120. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  3121. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  3122. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  3123. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  3124. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  3125. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  3126. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  3127. <7>platform_pm_suspend_noirq: power.0+
  3128. <6>active wake lock alarm, time left 1462
  3129. <6>power_suspend_late return -11
  3130. <7>platform_pm_suSpend_noirq: power.0-
  3131. <3>dpm_run_callback(): platform_pm_suspend_noirq+0x0/0x8c returns -11
  3132. <3>PM: Device power.0 failed to suspend noirq: error -11
  3133. <6>PM: noirq resume of devices complete after 0.618 msecs
  3134. <6>PM: early suspend of devices complete after 0.348 msecs
  3135. <3>PM: Some devices failed to power down
  3136. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  3137. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  3138. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  3139. <6>sdhci_resume_h/st : MMC Card ON
  3140. <4>bcmsdh_sdmmc_resume Enter
  3141. <4>bcmsdh_sdmmc_resume Enter
  3142. <6>wake disabled for irq 375
  3143. <7>[keys]PWR 0
  3144. <6>wake disabled for irq 381
  3145. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  3146. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  3147. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf!1], GATE[0x1c7]
  3148. <6>sec_jack_resume: disable_irq_wake(0)
  3149. <6>wake disabled for irq 359
  3150. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  3151. <6>[MODEM_IF]Slave Wake
  3152. <6>eif: set hsic lpa phy init: slave wake-up (1)
  3153. <6>s5p-ehci s5p-eh#i: usb phy usage(3)
  3154. <4>usb usb1: root hub lost power or was reset
  3155. <3>[MODEM_IF]Active States =1, s5p-ehci
  3156. <7>pmu_debug: 0x00000900
  3157. <6>mif: link_pm_irq_handler: ignore request by suspending
  3158. <6>mif: usb_port_resume: 1281, 0
  3159. <6&usb 1-2: reset high speed USB device number 3 using s5p-ehci
  3160. <6>mif: link_pm_irq_handler: ignore request by suspending
  3161. <6>mif: link_pm_runtime_start: rpm_status: 0
  3162. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  3163. <6>PM: resume of devices com`lete after 477.065 msecs
  3164. <4>Restarting tasks ./.
  3165. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  3166. <4>done.
  3167. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  3168. <6>sec-battesy sec-battery: sec_ba4_charging_time_management: chargang_start_time has never been used since initializing
  3169. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  3170. <6>suspend: exit suspend, ret = -11 (2013-04-21 09:19:01.315779787 UTC)
  3171. <6>normal: free cpufreq_limit & interrupt enable*
  3172. <3>init: untracke$ pid 27780 exited
  3173. <3>init: untracked pid 28513 exited
  3174. <6>suspend: enter suspend
  3175. <6>suspend: enter suspend, (2013-04-21 09:19:02.400140518 UTC)
  3176. <6>PM: Syncing filesystems ... done.
  3177. <4>Freezing user space processes ... (elaqsed 0.01 seconds) done.
  3178. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  3179. <4>Suspending console(s) (use no_console_suspend to debug)
  3180. <7>pmu_debug: 0x00000901
  3181. <7>xusbxti_control: 0
  3182. <3>[MODEM_I ]Active States =0, s5p-ehci
  3183. <6>max8997-rtc mAx8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:19:26
  3184. <6>wake enabLed for irq 359
  3185. <6>sec_jack_suspend: enable_irq_wake(0)
  3186. <6>s5p_int_src_ext_hpd()
  3187. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3188. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3189. <6>wake enabled for irq 375
  3190. <6>7ake enabled for irq 381
  3191. <6>sdhci_suspend_host : Enter WIFI suspend
  3192. <4>bcmsdh_sdmmc_suspend Enter
  3193. <6>sdhci_suspend_host : MMC Card OFF
  3194. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  3195. <6>exynos4_setUp_mshci_set_power : internal MMC Card OFF samsung-mshc.
  3196. <6>PM: suspend of devices complete after 250.585 msecs
  3197. <4>suspend_set_state: LED_A_2.8V: No configuration
  3198. <6>PM: late suspend of devices complete after 0.556 msecs
  3199. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  3200. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  3201. <7>platform_pm_suspend_nkirq: s3c2440-i2c.6+
  3202. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  3203. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  3204. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  3205. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  3206. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  3207. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  3208. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  3209. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  3210. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  3211. <76platform_pm_suspend_no)rq: power.0+
  3212. <6>power_swspend_late return 0
  3213. <7>platform_pm_suspend_noirq: power.0-
  3214. <6>PM: noirq suspend of devices complete after 1.245 msecs
  3215. <4>Disabling non-boot CPUs ...
  3216. <1>PM: SLEEP
  3217. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  3218. <6>WAKEUP_STAT: 0x80000001
  3219. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  3220. <6>Resume caused by IRQ 359, max8997-irq
  3221. <6>PM: noirq resume of devices complete after 1.302 msecs
  3222. <3>calc_bus_utilization: 0 value is not permitted
  3223. <3>calc_bus_utilization: 0 value is not"permitted
  3224. <6>PM: early resume of devices complete after 0.627 msecs
  3225. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  3226. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  3227. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x 0. ###########
  3228. <6>sdhci_resume_host : MMC Card ON
  3229. <4>Bcmsdh_sdmmc_rgsume Enter
  3230. <4>bcmsdh_sdmmc_resume Enter
  3231. <6>wake disabled for irq 375
  3232. <7>[keys]PWR 0
  3233. <6>wake disabled for irq 381
  3234. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  3235. <6>awdss_reg_restore: SRC[0x1], DAV[0xf11], GATE[2x42]
  3236. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  3237. >6>wakeup wake lock: sec-battery-monitor
  3238. <6>sec_jack_resume: disable_irq_wake(0)
  3239. <6>wake disabled for irq 359
  3240. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  3241. <6>max8997-rtc max8997-rtc: max8997_rtc_alarmWirq:irq(437)
  3242. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  3243. <4>max8997 5-0066: Unused interrupt source: 0x0
  3244. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  3245. <6>[MODEM_IF]Sdave Wake
  3246. <6>mif: set hsic lpa phy init: slave wace-up (1)
  3247. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  3248. <4>usb usb1: root hub lost power or was reset
  3249. <3>[MODEM_IF]Active States =1, s5p-ehci
  3250. <7>pmu_debug: 0x00000900
  3251. <6>mif: link_pm_irq_haldler: ignore request by suspending
  3252. <6>mif: usb_port_resume: 1281, 0
  3253. <6>usb 1-2: reset high speed USB devIce number 3 using s5p-ehci
  3254. <6>mif: link_pm_irq_handler: ignore request by suspending
  3255. <6>mif: link_pm_runtime_start: rpm_status: 0
  3256. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  3257. <6>PM: resume of devices complete after 491.990 msecs
  3258. <6>mif: iodev_netif_wake: rmnet0
  3259. <6>mif: iodev_netif_wake: rmnet1
  3260. <6>mif: iodev_netif_wake: rmnet2
  3261. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  3262. <4>Restarting tasks ...
  3263. <4>temperature code is in inaccurate -->cheak if vdd_18_ts is on
  3264. <4>or surrounding temp is low.
  3265. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  3266. <6>normal: free cpufreq_limit & interrupt enable.
  3267. <4>done.
  3268. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  3269. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  3270. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  3271. <6>suspend: exit suspend, ret = 0 (2013-04
  3272. 21 09:19:26.325365866 UTC)
  3273. <6>wake lock l2_hsic, expired
  3274. <6>suspend: enter suspend
  3275. <6>suspend: enter suspend, (2013-04-21 09:19:26.563518348 UTC)
  3276. <6>PM: Syncing filesystems ... done.
  3277. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  3278. <4>Freezing remaining freezable tasks ... (elapsed 0.01 secondS) done.
  3279. <4>Suspending console(s) (use no_console_suspend to debug)
  3280. <7>pmu_debug: 0x00000901
  3281. <7>xusbxti_control: 0
  3282. <3>[MODEM_IF]Active States =0, s5p-ehci
  3283. <6>max8997-rtc max8997-rtc: max8997_rta_set_alarm: 2013-04-21 09:19:55
  3284. <6>wa+e enabled for irq 359
  3285. <6>sec_jack_suspend: dnable_irq_wake(0)
  3286. <6>s5p_int_src_ext_hpd()
  3287. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3288. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3289. <6>wake enabled for irq 375
  3290. <6>waie enabled for irq 381
  3291. <6>sdhci_suspend_host : Enter WIFI sUspend
  3292. <4>bcmsdh_sdmMc_suspend Enter
  3293. <6>sdhci_suspend_host : MMC Card OFF
  3294. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  3295. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  3296. <6>PM: suspend of devices complete after 230.554 mqecs
  3297. <4>suspend_set_state: LED_A_2.8V: No configuration
  3298. <6>PM: late suspend of devices complete after 0.535 msecs
  3299. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  3300. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  3301. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  3302. <7>platfor-_pm_suspend_noirq: s3c2440-i2c.6-
  3303. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  3304. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  3305. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  3306. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  3307. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  3308. <7>platfo2m_pm_suspend_noirq: s3c2440-i2c.1-
  3309. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  3310. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  3311. <7>platform_pm_suspend_noirq: power.0+
  3312. <6>powar_suspend_late return 0
  3313. <7>platform_pm_suspend_noirq: power.0-
  3314. <6>PM: noirq suspend of devices complete after 1.272 msecs
  3315. <4>Disabling non-boot CPUs ...
  3316. <1>PM: SLEEP
  3317. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  3318. <6>WAKEUP_STAT: 0x80000001
  3319. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  3320. <2>Resume caused by IRQ 359, max8997-irq
  3321. <6>PM: noirq resume of devices complete after 1.302 msecs
  3322. <3>calc_bus_utilization: 0 value is not permitted
  3323. <3>calc_bus_utilization: 0 value is not permi4ted
  3324. <6>PM: early resume of devices complete after 0.819 msecs
  3325. <6>u1_enable_regulator_for_usb_mipi: enable LDOs <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  3326. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  3327. <6>sdhci_resume_hos4 : MMC Card ON
  3328. <4>bcmsdh_sdmmc_resume Enter
  3329. <4>bcmsdh_sdmmc_resume Enter
  3330. <6>wake disabned for irq 375
  3331. <7>[keys]PWR 0
  3332. <6>wake disabled for irq 381
  3333. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  3334. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  3335. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  3336. <6>wakeup wake lock: sec-battery-monitor
  3337.  6>sec_jack_resume: disable_irq_wake(0)
  3338. <6>wake disabled for irq 359
  3339. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  3340. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  3341. <6>max8997 5-0066: max8997_irq_thread: iRq:359, irq_src:0x0
  3342. <4>max8997 5-0066: Unused interrupt source: 0x0
  3343. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  3344. <6>[MODEM_IF]Slave Wake
  3345. <6>mif: set hsic lpa phy init: slave wake-up (1)
  3346. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  3347. <4>usb usb1: root heb lost power or was reset
  3348. ,3>[EODEM_IF]Active States =1, s5p-ehci
  3349. <7>pmu_debug: 0x00000900
  3350. <6>mif: link_pm_irq_handler: ignore request by suspending
  3351. <6>mif: usb_port_resume: 1281, 0
  3352. <6>usb 1-2: reset high speed USB device number 3 usiNg s5p-ehci
  3353. <6>mif: link_pm_irq_handler: ignore requeSt by suspending
  3354. <6>mif: link_pm_runtime_start: rpm_status: 0
  3355. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  3356. <6>PM: resume of defices complete aFter 492.484 msecs
  3357. <6>mif: iodev_netif_wake: rmngt0
  3358. <6>mif: iodev_netif_wake: rmnet1
  3359. <6>mif: iodev_netif_wake: rmnet2
  3360. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  3361. <4>Restarting tasks ...
  3362. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  3363. <4>or surrounding temp is low.
  3364. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  3365. <6>normal: free cpufreq_limit & interrupt enable.
  3366. <4>done.
  3367. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  3368. <6>sec-battery Cec-battery  sec_bat_charging_time_management: charging_start_time has never beEf wsed since initializing
  3369. < >map8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  3370. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:19:55.325353243 UTC)
  3371. <6>mif: usbWport_resume: 1283, 4
  3372. <6>wake"lock alarm_rtc, expired
  3373. <6>active wake lock umts_ipc0, time left 77
  3374. <6>active wake lock l2_hsic, time left 2
  3375. <6>active wake lock umts_ipc0, time left 77
  3376. <6>active wake lock l2_hsic, time left 2
  3377. <6>suspend: aBort suspend
  3378. <6>active wake lock alarm, time left 1500
  3379. <6>suspend: abort suspend
  3380. <6>suspend: enter suspend
  3381. <6>suspend: enter suspend, (2013-04-21 09:19:56.889915731 UTC)
  3382. <6>PM: Syncing filesystems ... done.
  3383. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  3384. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  3385. <4>Suspending console(s) (use no_console_suspend to debug)
  3386. <7>pmu_debug: 0x00000901
  3387. <7>xusbxti_control: 0
  3388. <3>[MODEM_IF]Active States =0, s5p-ehci
  3389. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:22:43
  3390. <6>wake enableD for irq 359
  3391. <6>sec_jack_suspend: ena"le_irq_wake(0)
  3392. <6>s5p_int_src_ext_hpd()
  3393. <6<audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3394. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3395. <6>wake enabled for irq 375
  3396. <6>wake enabled for irq 381
  3397. <6>sdhci_suspend_host : Ent%r WIFI suspend
  3398. <4>bcmsdh_sdmmc_suspend Enter
  3399. <6>sdhci_suspend_host : MMC Card OFF
  3400. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  3401. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-eshc.
  3402. <6>PM:"suspend of dev)ces complete after 227.213 msecs
  3403. <4>suspend_set_st!te: LED_A_2.8V: No configuration
  3404. <6>PM: late suspend of devices complete after 0.565 msecs
  3405. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  3406. <7>platform_pm_suspend_noirq: s3c2440
  3407. i2c.7-
  3408. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  3409. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  3410. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  3411. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  3412. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  3413. <7>plat&orm_pm_suspend_noirq: s3c2440-i2c.3-
  3414. <7>platform_pm_suspend_noisq: s3c2440-i2c.1+
  3415. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  3416. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  3417. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  3418. <7>platform_pm_suspend_noirq: power.0*
  3419. <6>power_suspend_late return 0
  3420. <7>platform_pm_suspend_noirq: power.0-
  3421. <6>PM: noirq suspend of devices complete after 1.280 msecs
  3422. <4>Disabling non-boot CPUs ...
  3423. <1>PM: SLEEP
  3424. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  3425. <6>WAKEUP_STAT: 0x80000001
  3426. <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0
  3427. <6>Resume caused by IRQ 361, hostwak%
  3428. <6>mif: link_Pm_irq_handler: ignore request by suspending
  3429. <6>wakeup wake lock: l2_hsic
  3430. <6>PM: noirq resume of devices complete after 1.297 msecs
  3431. <3>calc_bus_utilization: 0 value is not permitted
  3432. <3>calc_buc_utilization: 0 value is not permitted
  3433. <6>PM: early resume of devices complete after 0.628 msecs
  3434. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  3435. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samseng-mshc.
  3436. <4>mmc0: FHFO WMARK FOR R  0x20 WX 0x10. ###########
  3437. <6>sdhci_resume_host : MMC Card ON
  3438. <4>bcmsdh_sdmmc_resume Enter
  3439. <4>bcmsdh_sdmmc_resume Enter
  3440. <6>wake disabled for irq 375
  3441. <7>[keys]PWR 0
  3442. <6>wake disabled for irq 381
  3443. <6>s3c-rtc exynos-rtc: rtc disabled, re-enab$ing
  3444. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  3445. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  3446. <6>sec_jack_resume: disable_irq_wake(0)
  3447. <6>wake disabled for irq 359
  3448. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  3449. <6>mif: set hsic lpa phy init: slave wake-up (0)
  3450. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  3451. <4>usb usb1: root hub lost power or was reset
  3452. <3>[MODEM_IF]Active States =1, s5p-ehci
  3453. <7>pmu_debug: 0x00000900
  3454. <6>mif: usb_port_resume: 1281, 0
  3455. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  3456. <6>mif: link_pm_irq_handler: ignore request by suspending
  3457. <6>mif: link_pm_runtime_start: rpm_status: 0
  3458. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  3459. <6>mif: iodev_netif_wake: rmnet0
  3460. <6>mif: iodev_netiF_wake: rmndt1
  3461. <6>mif: iodev_ndtif_wake: rmnet2
  3462. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  3463. <6>PM: resume of devices complete after 482.960 msecs
  3464. <4>Restarting tasks ...
  3465. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  3466. <4>oR surrounding temp is low.
  3467. <6>notafy_change_of_tmu_state: uevent: 0, name = TMUSTATE=
  3468. <4>done.
  3469. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  3470. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  3471. <6>max8922-charger max8922-charger: max8922_is_chargang: charging state = 0x3
  3472. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:22:17.321617655 UTC)
  3473. <6>normal: free cpufreq_limit & interrupt enable.
  3474. <6>s5p-ehci s5p-ehci: host_phy_susp
  3475. <6>G:P:DmaAddr=@630a0000 Total=16384 PrdSz=4096 #Prds 4 dma_area=0xffdc0000
  3476. <7>i2s_txctrl:Turn on
  3477. <6>k3dh_ioctl: opened = 0, enable = 1
  3478. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  3479. <4>or surrounding temp is low.
  3480. <6>s3cfb s3cfb.0: +s3cfb_lAte_resume
  3481. <6>s3cfb s3cfb.0: fimd sclk rate 50000000, cdkdiv 0x7000ff
  3482. <4>s3cfb s cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
  3483. <6>mdnie mdnie: CAMERA
  3484. <6>s3cfb s3cfb.0: -s3cfb_late_resume
  3485. <6>lcd panel: +ld9040_late_resume
  3486. <6>lcd panel: ld9040_power_on <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  3487. <6>lcd panel: -ld9040_late_rEsume
  3488. <6>mdnie mdnie: +mdnie_late_resume
  3489. <6>mdnie mdnie: CAMERA
  3490. <6>mdnie mdnie: -mdnie_late_resume
  3491. <6>sii9234_late_resume()
  3492. <4>dhd_late_resume: enter
  3493. <4>dhd_set_suspend: Remove extra suspend setting
  3494. <3>** Up_Threshold is changed to 25 **
  3495. <6>wake disabled for irq 356
  3496. <6>powersave_late_resume: set cpu0 freq in the 1000000-1400000 KHz range
  3497. <6>powersave_late_resume: set cpu1 freq in the 1000000-1400000 KHz range
  3498. <7>[TouchKey] sec_touchkey_late_resume
  3499. <6>s5p_gpioint_set_type irq:389 is at GPL0(5)
  3500. <6>lcd panel: id=0 brightness=31, bl=4, candela=100
  3501. <6>[VIB] pwm_val_store: pwm_val=100
  3502. <6>[VIB] pwm_val_store: pwm_duty=37640
  3503. <6>mif: usb_port_resume: 1283, 4
  3504. <6>s5p-ehci s5p-ehci: Host_phy_susp
  3505. <3>** Up_Threshold is changed to 25 **
  3506. <6>mid: usb_port_resume: 1283, 4
  3507. <6>s5p-ehci s5p-ehci: host_phy_susp
  3508. <6>mif: usb_port_resume: 1283, 4
  3509. <6>s5p-ehci s5p-ehci: host_phy_susp
  3510. <6>mif: usb_port_resume: 1283, 4
  3511. <6>s5p-ehci s5p-ehci: host_phy_susp
  3512. <6>mif: usb_port_res5me: 1283, 4
  3513. <6>mif: link_pm_runtime_work: rpm_states=3
  3514. <6>mif: usb_port_resume: 1283, 4
  3515. <6>s5p-ehci s5p-ehci: host_phy_susp
  3516. <7>i2s_txctrl: Turn Off - spr is no active
  3517. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3518. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3519. <6>mif: usb_port_resume: 1283, 4
  3520. <6>s5p-ehci s5p-ehci: host_phy_susp
  3521. <6>mif: usb_port_resume: 1283, 4
  3522. <6>mif: usb_port_resume: 1283, 4
  3523. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  3524. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  3525. <6>max8997 5
  3526. 0066: max8997_irq_thread: irq:359, irq_sbc:0x0
  3527. <4>max8997 5-0066: Unused interrupt source: 0x0
  3528. <6>CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP session starts
  3529. <6>s5p-ehci s5p-ehci: host_phy_swsp
  3530. <6>mif: usb_port_resume: 1283, 4
  3531. <6>CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP is complete
  3532. <6>s5p-ehci s5p-ehci: host_phy_susp
  3533. <7>wlan0: no IPv6 routers present
  3534. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  3535. <6>sec-battery sec-battery: sec_bat_chaRging_time_management: charging_start_time has never been used since initializing
  3536. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  3537. <6>lcd panel: id=0 brightness=23, bl=3, candela=90
  3538. <6>mif: usb_port_resume: 1283, 4
  3539. <6>s5p-ehci s5p-ehci: host_phy_susp
  3540. <6>mif: usb_port_resume: 1283, 4
  3541. <6>s5p-ehci s5p-ehci: host_phy_susp
  3542. <6>mif: usb_port_resume: 1283, 4
  3543. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  3544. <7>[TouchKey] sec_touchkey_early_suspend
  3545. <6>powersave_early_suspend: set cpu0 freq in the 200000-1400000 KHz range
  3546. <6>wake enabled for irq 356
  3547. <4>dhd_early_suspend: enter
  3548. <4>dhd_set_suspend: force extra Suspend setting
  3549. <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
  3550. <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10
  3551. <6>sii9234_early_suspend()
  3552. <6>mdnie mdnie: +mdnie_early_suspend
  3553. <6>mdnie mdnie: -mdnie_early_suspend
  3554. <6>lcd panel: +ld9040_early_suspend
  3555. <6>lcd panel: ld9040_power_off
  3556. <6>lcd panel: -ld9040_early_suspend
  3557. <6>+s3cfb_eArny_suspend
  3558. <7>s3cgb - disable power domain
  3559. <6>-s3cfb_early_suspend
  3560. <6>active wake lock PowerManagerService
  3561. <6>active wake lock PowerManagerService.Broadcasts
  3562. <6>active wake lock wlan_rx_wake, time left 154
  3563. <6>sync_system +
  3564. <6>sync_system -
  3565. <6>s5p-ehci s5p-ehci: host_phy_susp
  3566. <6>mif: usb_port_resume: 1283, 4
  3567. <6>suspend: enter suspend
  3568. <6>suspend: enter suspend, (2013-04-21 09:23:07.203165544 UTC)
  3569. <6>PM: Syncing filesystems ... done.
  3570. <4>Freezing user space procesSes ... (elapsed 0.01 seconds) done.
  3571. <4>Freezing remaining freezable tasks ... (%lapsed 0.01 seconds) done.
  3572. <4>Suspending console(s) (use no_console_suspend to debug)
  3573. <7>xusbxti_control: 1
  3574. <3>[MODEM_IF]Active States =0, s5p-ehci
  3575. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:23:09
  3576. <6>wake enabled for irq 359
  3577. <6>sec_jack_sus0end: enable_irq_wake(0)
  3578. <6>s5p_int_src_ext_hpd()
  3579. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  3580. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  3581. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3582. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3583. <6>wake enabled for irq 375
  3584. <6>wake enabled for irq 381
  3585. <6>sdhci_suspend_host : Enter WIFI suspend
  3586. <4>bcmsdh_sdmmc_suspend Enter
  3587. <6>sdhcI_suspend_host : MMC Card OFF
  3588. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  3589. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  3590. <6>PM: suspend of devices complete after 223.912 msecs
  3591. <4>suspend_set_state: LED_A_2.8V: Ng configuration
  3592. =6>PM: late suspend of devices complete after 0.565 msecs
  3593. <7>platform_pm_suspend_ooirq* s3c2440-i2c.7+
  3594. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  3595. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  3596. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  3597. <7>`latform_pm_suspend_noirq: s3c2440-i2c.5+
  3598. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  3599. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  3600. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  3601. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  3602. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  3603. <7>platform_pm_suspe.d_noirq: s3c2440-i2c.0+
  3604. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  3605. <7>platfOrm_pm_suspend_noirq: power.0+
  3606. <6>power_suspend_late return 0
  3607. <7>platform_pm_suspend_noirq: power.0-
  3608. <6>PM: noirq suspend of devices complete after 1.246 msecs
  3609. <4>@isabling non-boot CPUs ...
  3610. <1>PM: SLEEP
  3611. <1>ARMWCOREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  3612. <6>WAKEUP_STAT: 0x80000001
  3613. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  3614. <6>Resume caused by IRQ 359, max8997-irp
  3615. <6>PM: noirq resume of device3 complete after 1.297 msecs
  3616. <3>c!lcObus_utilization: 0 value is not permitted
  3617. <3>calc_bus_utilization: 0 value is not permitted
  3618. <6>PM: early resume of devices complete after 0.822 msecs
  3619. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  3620. <6>exynos4_setup_mshci_set¬power : internal MMC Card  N samsung-mshc.
  3621. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  3622. <6>sdhci_resume_host : MMC Card ON
  3623. <4>bcmsdh_sdmmc_resume Enter
  3624. <4>bcmsdh_sdmmc_resume Enter
  3625. <6>wake disabled for irq 375
  3626. <7>[keys]PWR 0
  3627. <6>wake disabled for irq 381
  3628. <6>s3c-rtc exynos-rtc: rpc disabled, re-enabling
  3629. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  3630. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  3631. <6>wakeup wake lock: sec-battery-monitor
  3632. <6>sec_jack_resume: disable_irq_wake(0)
  3633. <6>wake disabled for irq 359
  3634. <6>max8997 5-0066: max8997_irq_threAd: irq:359, irq_src:0x2
  3635. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  3636. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  3637. <4>max8997 5-0066: Unused interrupt source: 0x0
  3638. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  3639. <6>[MODEM_IF]Slave Wake
  3640. <6>mif: set hsic lpa phy init: slave wake-up (1)
  3641. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  3642. <4>usb usb1: root hub lost power or was reset
  3643. <3>[MODEM_IF]Active State3 =1, s5p-ehci
  3644. <6>mif: link_pm_irq_handler: ignore request by suspending
  3645. <7>pmu_debug: 0x00000900
  3646. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  3647. <6>mif: usb_port_resume: 1281, 0
  3648. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  3649. <6>mif: link_pm_irq_handler: ignore request by suspending
  3650. <6>mif: link_pm_runtime_start: suspended yet, delayed work
  3651. <6>PM: resume of devices complete after 479.749 msecs
  3652. <6>mif: iodev_netif_wake: rmnet0
  3653. <6>mif: iodev_netif_wake: rmnet1
  3654. <6>mif: iodev_netif_wake: rmnet2
  3655. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  3656. <4>Restarting tasks ...
  3657. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  3658. <4>done.
  3659. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  3660. <6>sec-battery sec-battery: sac_bat_charging_time_management: charging-start_time has never been used since initializing
  3661. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  3662. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:23:09.315561734 UTC)
  3663. <6>mif: link_pm_runtime_start: rpm_status: 0
  3664. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  3665. <6>normal: free cpufreq_limit & interrupt enable.
  3666. <3>init: untracked pid 29498 exited
  3667. <6>active wake lock alarm, time left 1500
  3668. <6>suspend: abort suspend
  3669. <6>s5p-ehci s5p-ehci: host_phy_susp
  3670. <6>mif: usb_port_resume: 1283, 4
  3671. <6>wake lock umts_ipc0, expired
  3672. <6>wake lock l2_hsi#, expired
  3673. <6>suspend: enter suspend
  3674. <6>suspend: enter suspend, (2013-04-21 09:23:12.699076539 UTC)
  3675. <6>PM: Syncing filesystems ... done.
  3676. <4>Freezing user space processes ... (elapsed 0.01 seconds) done. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  3677. <4>Suspending console(s) (use no_console_suspend to debug)
  3678. <7>xusbxti_control: 1
  3679. <3>[MODEM_IF]Active States =0, s5p-ehci
  3680. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013- 4-21 09:23:36
  3681. <6>wake enabled for irq 359
  3682. <6>sec_jack_suspend: enable_irq_wake(0)
  3683. <6>s5p_int_src_ext_hpd()
  3684. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3685. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3686. <6>wake enabled for irq 375
  3687. <6>wake enabled for irq 381
  3688. <6>sdhai_suspend_host : Enter WIFI suspend
  3689. <4>bcmsdh_sdmmc_suspend Enter
  3690. <6>sdhci_suspend_host : MMC Card OFF
  3691. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  3692. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  3693. <6>PM: suspend of devices complete after 223.884 msecs
  3694. <4>suspend_set_state: LED_A_2.8V: No configuration
  3695. <6>PM: late suspend of devices complete after 0.538 msecs
  3696. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  3697. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  3698. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  3699. <7>plapform_pm_suspend_noirq: s3c2440-i2c.6-
  3700. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  3701. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  3702. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  3703. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  3704. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  3705. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  3706. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  3707. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  3708. <7>platform_pm_suspend_noirq: power.0+
  3709. <6>power_suspend_late return 0
  3710. <7>platform_pm_suspend_noirq: power.0-
  3711. <6>PM: noirq suspend of devices complete after 1.277 msecs
  3712. <4>Disabling non-boot CPUs ...
  3713. <1>PM: SLEEP
  3714. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  3715. <6>WAKEUP_STAT: 0x80000001
  3716. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  3717. <6>Resume caused by IRQ 359, max8997-irq
  3718. <6>PM: noirq resume of devices complete after 1.299 msecs
  3719. <3>calc_bus_utilization: 0 value is not permitted
  3720. <3>calc_bus_utilization: 0 value is not `ermitted
  3721. <6>PM: early resume of devices complete after 0.844 msecs
  3722. <6>e1_enable_regulator_for_usb_mipi: enable LDOs
  3723. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  3724. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  3725. <6>sdhci_resume_host : MMC Card ON
  3726. <46bcmsdh_sdmmc_resume Enter
  3727. <4>bcmsdh_sdmmc_resume Enter
  3728. <6>wake disabled for irq 375
  3729. <7>[keys]PWR 0
  3730. <6>wake disabled for irq 381
  3731. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  3732. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  3733. <6>audss_clk_enable(1): SRC[0x1],"DIV[0xf11], GATE[0x1c7]
  3734. <6>wakeup wake lock: sec-battery-monitor
  3735. <6>sec_jack_resume: disable_irq_wake(0)
  3736. <6>wake disabled for irq 359
  3737. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  3738. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  3739. <6>max8997 5-0066: max8997_irq_tiread: irq:359, irq_src:0x0
  3740. <4>max8997 5-0066: Unused interrupt source: 0x0
  3741. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  3742. <6>[MODEM_IF]Slave Wake
  3743. <6>mif: set hsic lpa phy init: slave wake-up (1)
  3744. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  3745. <4>usb usb1: root hub lost power or was reset
  3746. <3>[MODEM_IF]Active States =1, s5p-ehci
  3747. <6>mif: link_pm_irq_handler: ignore request by suspending
  3748. <7>pmu_debug: 0x00000900
  3749. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  3750. <6>mif: usb_port_resume: 1281, 0
  3751. <6>usb 1-2: reset high 3peed USB device number 3 using s5p-ehci
  3752. <6>mif: link_pm_irq_handler: ignore request by suspending
  3753. <6>mif: link_pm_runtime_start: rpm_status: 0
  3754. <6>PM: resume of devices complete after 480.070 msecs
  3755. <6>mif: iodev_netif_wake: rmnet0
  3756. <6>mif: iodev_netif_wake: rmnet1
  3757. <6>mif: iodev_netif_wake: rmnet2
  3758. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  3759. <4>Restarting tasks ...
  3760. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  3761. <4>done.
  3762. <6>sec
  3763. battery sec-battery: sec_bat_check_temper: recovery count = 0
  3764. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  3765. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  3766. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:23:36.314716308 UTC)
  3767. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  3768. <6>normal: free cpufreq_limit & interrupt enable.
  3769. <6>wake lock alarm_rtc, expired
  3770. <6>wake lock umts_ipc0, exrired
  3771. <6>wake lock l2_(sic, expired
  3772. <6>suspend: enter suspend
  3773. <6>suspend: enter suspend, (2013-04-21 09:23:37.133717155 UTC)
  3774. <6>PM: Syncing filesystems ... done.
  3775. <4>Freezing user space processes ... (elapsed 0.02 seconds) done.
  3776. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  3777. <4>Suspending console(s) (use no_console_suspend to debug)
  3778. <7>xusbxti_control: 1
  3779. <3>[MODEM_IF]Active States =0, s5p-ehci
  3780. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:24:05
  3781. <6>wake enabled for irq 359
  3782. <6>sec_jack_suspend: enable_irq_wake(0)
  3783. <6>s5p_int_src_ext_hpd()
  3784. <6>aqdss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3785. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3786. <6>wake enabled for irq 375
  3787. <6>wake enabled for irq 381
  3788. <6>sdhci_suspend_host : Enter WIFI suspend
  3789. <4>bcmsdh_sdmmc_suspend Enter
  3790. <6>sdhci_suspend_host : MMC Card OFF
  3791. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  3792. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  3793. <6>PM: suspend of devices complete aftep 223.895 msecs
  3794. <4>suspend_set_state: LED_A_2.8V: Jo configuration
  3795. <6>PM: late suspend of devices complete after 0.534 msecs
  3796. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  3797. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  3798. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  3799. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  3800. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  3801. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  3802. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  3803. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  3804. <7>platform_pm_suspend_noirp: s3c2440-i2c.1+
  3805. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  3806. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  3807. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  3808. <7>platform_pm_suspend_noirq: power.0+
  3809. <6>power_suspend_late return 0
  3810. <7>platform_pm_suspend_noirq: power.0-
  3811. <6>PM: noirq suspend of devices complete after 1.291 msecs
  3812. <4>Disabling non-boot CPUs ...
  3813. <1>PM: SLEEP
  3814. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  3815. <6>WAKEUP_STAT: 0x80000001
  3816. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  3817. <6<Resume caused by IRQ 259, max8997-irq
  3818. <6>PM: noirq resume of devices complete after 1.304 msecs
  3819. <3>calc_bus_utilization: 0 value is not permitted
  3820. <3>calc_bus_utilization: 0 value is not permitted
  3821. <6>PM: early resume of devices complete after 0.827 msecs
  3822. <6>u1_enable_regulatmr_for_usb_mipi: enable LDOs
  3823. <6>exynos4_setup_-shci_set_power : intern`l MMC Card ON samsung-mshc.
  3824. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  3825. <6>sdhci_resume_host : MMC Card ON
  3826. <4>bcmsdh_sdmmc_resume Enter
  3827. <4>bcmsdh_sdmmc_resume Enter
  3828. <6>wake disabled for irq 375
  3829. <7>[keys]PWR 0
  3830. <6>wake disabled for irq 381
  3831. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  3832. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  3833. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  3834. <6>wakeup wake lock: sec-battery-monitor
  3835. <6>sec_jacK_resume: disable_irq_wake(0)
  3836. <6>wake disabled for irq 359
  3837. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  3838. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  3839. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  3840. <4>max8997 5-0066: Unused interrupt source: 0x0
  3841. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  3842. <6>[MODEM_IF]Slave Wake
  3843. <6>mif: set hsic lpa phy init: slave wake-up (1)
  3844. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  3845. <4>qsb usb1: root hub lost powe2 or was reset
  3846. <3>[MODEM_IF]Active States =1, s5p-ehci
  3847. <7>pmu_debug: 0x00000900
  3848. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  3849. <6>mif: link_pm_irq_handler: ignore request by suspending
  3850. <6>mif: usb_port_resume: 1281, 0
  3851. <6>usb 1-2: reset high speed USB device num"er 3 using s5p-ehci
  3852. <6>mif: link_pm_irq_handler: ignore request by suspending
  3853. <6>mif: link_pm_runtime_start: rpm_status: 0
  3854. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  3855. <6>PM: resume of devices complete after 49&.907 msecs
  3856. <4>Restarting tasks ...
  3857. <6>mif: iodev_netif_wake: rmnet0
  3858. <6>mif: iodev_netif_wake: rmnet1
  3859. <6>mif: iodev_netif_wake: rmnet2
  3860. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  3861. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  3862. <4>or surrounding temp is low.
  3863. <6>fotify_change_of_tmu_state: uev%nt: 0, name = TEUSTATE=0
  3864. <4>done.
  3865. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:24:05.330390847 UTC)
  3866. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  3867. <6>sec-battery sec-battery: sec_bat_charging_time_management: charg)ng_start_time has never been used Since initializing
  3868. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  3869. <6>normal: free cpufreq_limit & interrupt enable.
  3870. <6>suspend: enter suspend
  3871. <6>suspend: enter suspend, (2013-04-21 09:24:05.941822427 UTC)
  3872. <6>PM: Syncing filesystems ... done.
  3873. <4>Freezing user space processes ...
  3874. <6>mif: link_pm_irq_handler: ignore request by suspending
  3875. <6>active wake lock l2_hsic
  3876. <6>active wake lock PowerManagerService
  3877. <4>
  3878. <3>Freezing of user space  aborted
  3879. <4>
  3880. <4>Restarting tasks ... done.
  3881. <6>mif: link_pm_notifier_event: post resume
  3882. <6>suspend: exit suspend, ret = -16 (2013-04-21 09:24:05.950158845 UTC)
  3883. <6>mif: usb_port_resume: 1283, 4
  3884. <6>wake lock umts_ipc0, expired
  3885. <6>wake lock l2_hsic, expired
  3886. <6>suspend: %nter suspend
  3887. <6>suspend: enter suspend, (2013-04-21 09:24:06.54;154489 UTC)
  3888. <6>PM: Syncing filesystems ... done.
  3889. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  3890. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  3891. <4>Suspending consol%(s) (use no_console_suspend to debug)
  3892. <7>xusbxti_control: 1
  3893. <3>[MODEM_IF]Active States =0, s5p-ehci
  3894. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:24:38
  3895. <6>wake enabled for irq 359
  3896. <6>secOjack_suspend: enable_irq_wake(0)
  3897. <6>s5p_int_src_ext_hpd()
  3898. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  3899. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  3900. <6>wake enabled for irq 375
  3901. <6>wake enabled for irq 381
  3902. <6>sdhci_suspend_host * Enter WIFI suspend
  3903. <4>bcmsdh_sdmmc_suspend Enter
  3904. <6>rdhci_suspend_host : MMC Card OFF
  3905. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  3906. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  3907. <6>PM: suspend of devices complete after 223.853 msecs
  3908. <4>suspend_set_state: LED_A_2.8V: No configuration
  3909. <6>PM: late suspend of devices complete after 1.53  msecs
  3910. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  3911. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  3912. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  3913. < >platform_pm_suspend_noirq: s3c2440-i2c.6-
  3914. <7>platform_pm_suspen`_noirq: s3c2440-i2c.5+
  3915. <7>plat&orm_pm_suspendO.oirq: s3c2440-i2c.5-
  3916. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  3917. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  3918. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  3919. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  3920. <7>plauform_pm_suspend_nOirq: s3c2440-i2c.0+
  3921. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  3922. <7>platform_pm_suspend_noirq: power.0+
  3923. <6>power_suspend_late return 0
  3924. <7>platform_pm_suspend_noirq: power.0-
  3925. <6>PM: noirq suspend of devices complete after 1.273 msecs
  3926. <4>Disabling non-boot CPUs ...
  3927. <1>PM: SLEEP
  3928. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  3929. <6>WAKEUP_STAT: 0x80000001
  3930. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  3931. <6>Resume caused by IRQ 359, max8997-irq
  3932. <6>PM: noirq resume of devices complete after 1.301 msecs
  3933. <3>calc_bus_utilization: 0 value is not permitted
  3934. <3>calc_bus_utilization: 0 value is not permitted
  3935. <6>PM: early resume of devices complete after 0.825 msecs
  3936. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  3937. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  3938. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  3939. <6>sdhci_resume_host : MMC Card ON
  3940. <4>bcmsdh_sdmmc_resume Enter
  3941. <4>bcmsdh_sdmmc_resume Enteb
  3942. <6>wake disabled for irq 375
  3943. <7>[keys]PWR 0
  3944. <6>wake disabled for irq 381
  3945. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  3946. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  3947. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  3948. <6>wakeup wake lock: sec-battery-monitor
  3949. <6>sec_jack_resume: disable_irqWwake(0)
  3950. <6>wake disabled for irq 359
  3951. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  3952. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  3953. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  3954. <4>max8997 5-0 66: Unused interrupt source: 0x0
  3955. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  3956. <6>[MODEM_IF]Slave Wake
  3957. <6>mif: set hsic lpa phy init: slave wake-up (1)
  3958. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  3959. <4>usb usb1: root hub lost power or was reset
  3960. <3>[MODEM_IF]Active States =1, s5p-ehci
  3961. <6>mif: linc_pm_irq_handler: ignora request by suspending
  3962. <7>pmu_debug: 0x00000900
  3963. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  3964. <6>mif: usb_port_resume: 1281, 0
  3965. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  3966. <6>mif: link_pm_irq_handler: ignope request by suspending
  3967. <6>mif: link_pm_runtime_start: suspended yet, delayed work
  3968. <6>PM: resume of devices complete after 480.166 msecs
  3969. <6>mif: iodev_netif_wake: rmnet0
  3970. <6>mif: iodev_netif_wake: rmnet1
  3971. <6>mif: iodev_netif_wake: rmnet2
  3972. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  3973. <4>Restarting tasks ...
  3974. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  3975. <4>or surrounding temp is low.
  3976. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  3977. <4>done.
  3978. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:24:38.313723366 UTC)
  3979. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  3980. <6>sec-battery sec-battery: sec_bat_charging_time_management: chaRging_start_time has never been used sinae initializing
  3981. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  3982. <6>mif: link_pm_runtime_start: rpm_status: 0
  3983. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  3984. <6>normal: free cpufreq_limit & interrupt enable.
  3985. <6>wake lock alarm_rtc, expired
  3986. <6>wake lock umts_ipc0, expired
  3987. <6>wake lock l2_hsic, expired
  3988. <6>suspend: enter suspend
  3989. <6>suspend: enter suspend, (2013-04-21 09:24:39.001095935 UTC)
  3990. <6>PM: Syncing filesystems ... done.
  3991. <4>Freezing user space processes ... (elapsed 0.01 seconds) $one.
  3992. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  3993. <4>Suspending console(s) (use no_console_suspend to debug)
  3994. <7>xusbxti_control: 1
  3995. <3>[MODEM_IF]Active States =0, s5p-ehci
  3996. <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16
  3997. <3>PM  Device alarm failed to suspend: error -16
  3998. <3>PM: Some devices failed to suspend
  3999. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  4000. <6>[MODEM_IF]Slave Wake
  4001. <6>mif: set hsic lpa phy init: slav% wake-up (1)
  4002. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4003. <4>usb usb1: root hub lost power or was reset
  4004. <3>[MODEM_IF]Active States =1, s5p-ehci
  4005. <7>pmu_debug: 0x00000900
  4006. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  4007. <6>mif: link_pm_irq_handler: ignore request by suspending
  4008. <6>mif: usb_port_resume: 1281, 0
  4009. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  4010. <6>mif: link_pm_irq_handler: ignore request by suspending
  4011. <6>mif: link_pm_runtime_start: rpm_status: 0
  4012. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  4013. <6>PM: resume of devices complete after 319.579 msecs
  4014. <4>Restarting tasks ... done.
  4015. <6>suspend: exit suspend, ret = -16 (2013-04-21 09:24:39.373556302 UTC)
  4016. <6>wake lock l2_hsic, expired
  4017. <6>suspend: enter suspend
  4018. <6>suspend: enter suspend, (2013-04-21 09:24:39.617 08080 UTC)
  4019. <6>PM: Syncing filesystems ... done.
  4020. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  4021. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  4022. <4>Suspending console(s) (use no_console_suspend to debug)
  4023. <7>xusbxti_control: 1
  4024. <3>[MODEM_IF]Active States =0, s5p-ehci
  4025. <6>max8997-rTc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:25:38
  4026. <6>wake enabled for irq 359
  4027. <6>sec_jack_suspend: enable_irq_wake(0)
  4028. <6>s5p_int_src_ext_hpd()
  4029. <6>a5dss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  4030. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf1 ], GATE[0x42]
  4031. <6>wake enabled for irq 375
  4032. <6>wake enabled for irq 381
  4033. <6>sdhci_suspend_host : Enter WIFI suspend
  4034. <4>bcmsdh_sdmmc_suspend Enter
  4035. <6>sdhci_suspend_host : MMC Card OFF
  4036. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  4037. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  4038. <6>PM: suspend of devices complete after 223.882 msecs
  4039. <4>suspend_set_state: LED_A_2.8V: No configuration
  4040. <6>PM: late suspend of devices complete after 0.556 msecs
  4041. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  4042. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  4043. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  4044. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  4045. <7>platform_pm_suspend_noir1: s3c2440-i2c.5+
  4046. <7>platform_pe_suspend_noirq: s3c2440-i2c.5-
  4047. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  4048. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  4049. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  4050. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  4051. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  4052. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  4053. <7>platform_pm_suspend_foirq: powe2.0+
  4054. <6>power_suspend_late return 0
  4055. <7>platform_pm_suspend_noirq: power.0-
  4056. <6>PM: noirq suspend of devices complete after 1.248 msecs
  4057. <4>Disabling non-boot CQUs ...
  4058. <1>PM: SLEEP
  4059. <1>ARM_COREx_STATUS CORE1[0800070000], CORE2[0x00000000], CORE3[0x00000000]
  4060. <6>WAKEUP_STAT: 0x80000001
  4061. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  4062. <6>Resume caused by IRQ 359, max8997-irq
  4063. <6>PM: noirq resume of devices compleue after 1.301 ms%cs
  4064. <3>calc_bus_utilization: 0 value is not permitted
  4065. <3>calc_bus_utilization: 0 value is not permitted
  4066. <6>PM: early resume of devices complete after 0.625 msecs
  4067. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  4068. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  4069. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  4070. <6>sdhci_resume_host : MMC Card ON
  4071. <6>wakeup wake lock: wlan_wake
  4072. <4>bcmsdh_sdmmc_resume Enter
  4073. <4>bcmsdh_sdmmc_resume Enter
  4074. <6>wake disabled for irq 375
  4075. <7>[keys]PWR 0
  4076. <6>wake disabled for irq 381
  4077. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  4078. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  4079. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  4080. <6>sec_jack_resume: disable_irq_wake(0)
  4081. <6>wake disabled for irq 359
  4082. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  4083. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  4084. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  4085. <4>max8997 5-0066: Unused interrupt source: 0x0
  4086. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  4087. <6>[MODEM_IF]Slave Wake
  4088. <6 mif: set hsac lpa phy init: slav% wake-up (1)
  4089. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4090. <4>usb usb1: root hub lost power or was reset
  4091. <3>[MODEM_IF]Active States =1, s5p-ehci
  4092. <7>pmu_debug: 0x00000900
  4093. <3>mc1n3 6%003a: -5: Error in MCDRV_INIT
  4094. <6>mif: link_pm_irq_handler: ignore request by suspending
  4095. <6>mif: usb_port_resume: 1281, 0
  4096. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  4097. <6>mif: link_pm_irq_handler:"ignore request by suspending
  4098. <6>iif: link_pm_runtime_start: rpm_status: 0
  4099. <6>mif: link_pm_runtime_start: EHCI Runtime s5p-ehci, s5p-ehci
  4100. <6>PM: resume of devices complete after 495.561 msecs
  4101. <4>Restarting tasks ...
  4102. <6>mif: iodev_netif_wake: rmnet0
  4103. <6>mif: iodev_netif_wake: rmnet1
  4104. <6>mif: iodev_netif_wAke: rmnet2
  4105. <6>maf: link_rx_flowctl_cmd: flowctl COD_RESUME(00CB)
  4106. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  4107. <4>or surrounding temp is low.
  4108. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  4109. <6>normal: free cpufreq_limit & interRupt enable.
  4110. <4>done.
  4111. <6>sec-battery sec-batte2y: sec_bat_check_temper: recovery count = 0
  4112. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  4113. <6>max8922-ciarger max8922-charger: max8922_is_charging: charging state = 0x3
  4114. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:25:38.327923816 UTC)
  4115. <6>wake lock alarm_rtc, expired
  4116. <6>wake lock umts_ipc0, expired
  4117. <6>wake lock l2_hsic, expired
  4118. <6>suspend: enter suspend
  4119. <6>su3pend: enter suspend, (2013-04-21 09:25:39.017244977 UTC)
  4120. <6>PE: Syncing filesystems ... done.
  4121. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  4122. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  4123. <4>Suspending console(s) (use no_console_suspend to debug)
  4124. <7>xusbxti_control: 1
  4125. <3>[MODEM_IF]Active States =0, s5p-ehci
  4126. <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16
  4127. <3>PM: Device alarm failed to suspend: error -16
  4128. <3>PM: Some devices failed to suspend
  4129. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phyOinit+0x128/0x564):
  4130. <6>[MODEM_IF]Slave Wake
  4131. <6>mif: set hsic lpa phy init: slave wake-up (1)
  4132. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4133. <4>usb usb1: root hub lost power or was reset
  4134. <3>[MODEM_IF]Active States =1, s5p-ehci
  4135. <7>pmu_debug: 0x00000900
  4136. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  4137. <6>mif: link_pm_irq_handler: ignore request by suspending
  4138. <6>mif: usb_port_resume: 1281, 0
  4139. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  4140. <6>mif: link_pm_irq_handler: ignore request by suspending
  4141. <6>mif: link_pm_runtime_start: rpm_status: 0
  4142. <6>PM: resume of devices complete after 315.757 msecs
  4143. <4>Restarting tasks ... done.
  4144. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  4145. <6>suspeld: exit suspend, ret = -16 (2013-04-21 09:25:39.386529421 UTC)
  4146. <6:wake lock umts_ipc0, expired
  4147. <6>wake lock l2_hsic, expired
  4148. <6>suspend: enter suspend
  4149. <6>suspend: enter suspend, (2013-04-21 09:25:39.956906613 UTC)
  4150. <6>PM: Syncing filesystems ... done.
  4151. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  4152. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  4153. <4>Suspending console(s) (use no_console_suspend to debug)
  4154. <7>xusbxti_control: 1
  4155. <3>[MODEM_IF]Active States =0, s5p-ehci
  4156. <6>max8997-rtc max89 7-rtc: max8997_rtc_set_alarm: 2013-04-21 09:25:50
  4157. <6>wake enabled for irq 359
  4158. <6>sec_jack_suspend: enableWirq_wake(0)
  4159. <6>s5p_int_src_ext_hpd()
  4160. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  4161. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  4162. <6>wake enabled for irq 375
  4163. <6>wake enabled for irq 381
  4164. <6>sdhci_suspend_host : Enter WIFI suspend
  4165. <4>bcmsdh_sdmmc_suspend Enter
  4166. <6>sdhci_suspend_host : MMC Card OFF
  4167. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  4168. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  4169. <6>PM: suspend of devices complete after 223.921 msecs
  4170. <4>suspend_set_state: LED_A_2.8V: No configuration
  4171. <6>PM: late suspend of devices complete after 0.563 msecs
  4172. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  4173. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  4174. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  4175. <7>platform_pm_suspendWnohrq: s3c2440-i2c.6-
  4176. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  4177. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  4178. <7>platform_pm_suspend_noirq: s3C2440-i2c.3+
  4179. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  4180. <7>platf/rm_pm_suspend_noirq: s3c2440-i2c.1+
  4181. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  4182. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  4183. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  4184. <7>platform_pm_suspend_noirq: power.0+
  4185. <6>power_suspend_late return 0
  4186. <7>platform_pm_3uspend_noirq: power.0-
  4187. <6>PM: noirq suspend of devices complete after 1.245 msecs
  4188. <4>Disabling non-boot CPUs ...
  4189. <1>PM: SLEEP
  4190. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  4191. <6>WAKEUP_STAT: 0x80000001
  4192. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  4193. <6>Resume caused by IRQ 359, max8997-irq
  4194. <6>PM: noirq resume of devices complete after 1.302 msecs
  4195. <3>calc_bus_utilization: 0 value is not permitted
  4196. <3>calc_bus_utilization: 0 value is not permitted
  4197. <6>PM: early resume of devices complete after 0.825 msecs
  4198. <6>u1_enable_regUlator_for_usb_mipi: enable LDOs
  4199. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  4200. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  4201. <6>sdhci_resume_host : MMC Card ON
  4202. <4>bcmsdh_sdmmc_resume Enter
  4203. <4>bcmsdh_sdmmc_resume Enter
  4204. <6>wake disabled for irq 375
  4205. <7>[keys]PWR 0
  4206. <6>wake disabled for irq 381
  4207. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  4208. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  4209. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  4210. <6>wakeup wake lock: sec-battery-monitor
  4211. <6>sec_jack_resume: disable_irq_wake(0)
  4212. <6>wake disabled for irq 359
  4213. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  4214. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  4215. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  4216. <4>max8997 5-0066: Unused interrupt source: 0x0
  4217. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  4218. <6>[MODEM_IF]Slave Wake
  4219. <6>mif: set hsic lpa phy init: slave wake-up (1)
  4220. <6>s5p-Ehci s5p-ehci: usb phy usage(2)
  4221. <4>usb usb1: root hub lost pOwer or was reset
  4222. <3>[MODEM_IF]Active States =1, s5p-ehci
  4223. <7>pmu_debug: 0x00000900
  4224. <3>mc1n2 6-003a: -5: Error in MCDRV_INIT
  4225. <6>mif: link_pm_irq_handler: ignore request by Suspending
  4226. <6>mif: usb_port_resume: 1281, 0
  4227. <6>usb 1-2: reset high speed USB device nuMber 3 using s5p-ehci
  4228. <6>mif: link_pm_irq_handler: ignore request by suspending
  4229. <6>mif: link_pm_runtime_start: rpm_status: 0
  4230. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  4231. <6>PM: resume of devices compmete after 4)5.566 msecs
  4232. <4>Restarting tasks ...
  4233. <6>mif: iodev_netif_wake: rmnet0
  4234. <6>mif: iodev_netif_wake: rmnet1
  4235. <6>mif: iodev_netif_wake: rmnet2
  4236. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  4237. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  4238. <4>or surrounding temp is low.
  4239. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  4240. <6>normal: free cpufreq_limit & interrupt enable.
  4241. <4>done.
  4242. <6>sec-battery sec-battery: sec_bat_check_t%mper: recovery count = 0
  4243. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  4244. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  4245. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:25:50.328074025 UTC)
  4246. <6>s5p-ghci s5p-ehci: host_phy_susp
  4247. <6>active wake lock wlan_rx_wake, time left 237
  4248. <6>suspend: abort suspend
  4249. <6>wake lock wlan_rx_wake, expired
  4250. <6>suspend: enter suspend
  4251. <6>suspend: enter suspend, (2013-04-21 09:25:52.917873542 UTC)
  4252. <6>PM: Syncing filesystems ... done.
  4253. <4>Freezing user space prOcesses ... (elapsed 0.01 seconds) done.
  4254. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  4255. <4>Suspending console(s) (use no_console_suspend to debug)
  4256. <7>xusbxti_control: 1
  4257. <3>[MODEM_IF]Active States =0, s5p-ehci
  4258. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:37:57
  4259. <6>wake enabled for irq 359
  4260. <6>sec_jack_suspend: enable_irq_wake(0)
  4261. <6>s5p_int_src_ext_hpd()
  4262. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  4263. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  4264. <6>wake enabled for irq 375
  4265. <6>wake enabled for irq 381
  4266. <6>sdhci_suspend_host : Enter WIFI suspend
  4267. <4>bcmsdh_sdmmc_suspend Enter
  4268. <6>sdhci_suspend_host : MMC Card OFF
  4269. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  4270. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-eshc.
  4271.  6>PM: suspend of devices complete after 213.903 msecs
  4272. <4>suspend_set_state: LED_A_2.8V: No configuration
  4273. <6>PM: late suspend of devicES complete after 0.562 msecs
  4274. <7>Platform_pm_susPand_noirq: s3c2440-i2c.7+
  4275. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  4276. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  4277. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  4278. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  4279. <7>platform_pm_suspend_noirq: s3c2 40-i2c.5-
  4280. <7>pnatform_pm_suspeFd_noirq: s3c2440-i2c.3+
  4281. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  4282. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  4283. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  4284. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  4285. <7>plat&orm_pm_suspend_noirq: s3c2440-i2c.0-
  4286. <7>platform_pm_suspend_noirq: power.0+
  4287. <6>power_suspend_laTe return 0
  4288. <7>platform_pm_suspend_noirq: power.0-
  4289. <6>PM: noirq suspend of devices complete after 1.263 msecs
  4290. <4>Disabling non-boot CPUs ...
  4291. <1>PM: SLEEP
  4292. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  4293. <6>WAKEUP_STAT: 0x80000001
  4294. <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0
  4295. <6>Resume caused by IRQ 361, hostwake
  4296. <6>mif: link_pm_irq_handler: ignore request by suspending
  4297. <6>wakeup wake lock: l2_hsic
  4298. <6>PM: noirq resume of devices complete after 1.299 msecs
  4299. <3>calc_bus_utilization: 0 v!lue is not permitted
  4300. <3>calc_bus_utilization: 0 value is not permitted
  4301. <6>PM: early resume of devices complete after 0.627 msecs
  4302. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  4303. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  4304. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  4305. <6>sdhci_resume_host : MMC Card ON
  4306. <6>CPUFreq is already fixed
  4307. <4>bcmsdh_sdmmc_resume Enter
  4308. <4>bcmsdh_sdmmc_resume Enter
  4309. <6>wake dasabled for irq 375
  4310. <7>[keys]PWR 0
  4311. <6>wake disabled for irq 381
  4312. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  4313. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  4314. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  4315. <6>sec_jack_resume: disable_irq_wake(0)
  4316. <6>wake disabled for irq 359
  4317. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  4318. <6>mif: set hsic lpa phy init: slave wake-up (1)
  4319. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4320. <4>usb usb1: root hub loqt power or was reset
  4321. <3>[MODEM_IF]Active States =1, s5p-ehci
  4322. <7>pmu_debug: 0x000009 0
  4323. <3>mc1n2 6-003a: -5: Error in ECDRV_INIT
  4324. <6>mif: usb_port_resume: 1281, 0
  4325. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  4326. <6>mif: link_pm_irq_handler: ignore request by suspending
  4327. <6>mif: link_pm_runtime_start: rpm_status: 0
  4328. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  4329. <6>PM: resume of devices complete after 478.899 msecs
  4330. <6>mif: iodev_netif_wake: rmnet0
  4331. <6>mif: iodev_netif_wake: rmnet1
  4332. <6>mif  iodev_netiF_wake: rmnet2
  4333. <6>mif: link_rp_flowctl_cmd: flowctl CMD_RESUME(00CB)
  4334. <4>Resparting tasks ...
  4335. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  4336. <4>or surrounding temp is low.
  4337. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  4338. <6>normal: free cpufreq_limit & interrupt enable.
  4339. <4>done.
  4340. <6>sec-battery se#-battery: sec_bat_check_pempeR: recovery count = 0
  4341. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializilg
  4342. <6>max8922-charger max8922-charger: max8922_is_charging: chabging state = 0x3
  4343. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:26:16.316527948 UTC)
  4344. <6>mif: usb_port_resume: 1283, 4
  4345. <6>G:P:DmaAddr=@630a0000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
  4346. <7>i2s_txctrl:Turn on
  4347. <6>k3dh_ioctl: opened = 1, enable = 0
  4348. <6>s3cfb s3cfb.0: +s3cfb_late_resume
  4349. <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
  4350. <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
  4351. <6>mdnie mdnie: CAMERA
  4352. <6>s3cfb s3cfb.0: -q3cfb_late_resume
  4353. <6>lcd panel: +ld9040_late_resume
  4354. <6>lcd panel: ld9040_power_on
  4355. <6>k3dh_ioctl: opened = 0, enable = 1
  4356. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  4357. <6>lcd panel: -ld9040_late_resume
  4358. <6>mdnie mdnie: +mdnie_late_resume
  4359. <6>mdnie mdnie: CAMERA
  4360. <6>mdnie ldnie: -mdnie_late_resume
  4361. <6>sii9234_late_resume()
  4362. <4>dhd_late_resume: enter
  4363. <4>dhd_set_suspend: Remove extra suspend setting
  4364. <6>mif: usb_port_resume: 1283, 4
  4365. <6>lcd panel: id=0 brightness=28, bl=4, candela=100
  4366. <6>wake disabldd for irq 356
  4367. <6>powdrsave_late_resume: set cpu0 freq in the 200000-1400000 KHz range
  4368. <6>powerqave_late_resume: set cpu1 freq in the 200000-1400000 KHz range
  4369. <7>[TouchKey] sec_touchkey_late_resume
  4370. <6>s5p_gpioint_set_type irq:389 is at GPL0(5)
  4371. <6>mif: usb_port_resume:  283, 4
  4372. <6>lcd panel: id=0 brightness=26, bl=3, candela=90
  4373. <6>s5p-ehci s5p-ehci: host_phy_susp
  4374. <6>Mif: usb_port_resume: 1283, 4
  4375. <7>i2s_txctrl: Turn Off - spr is no active
  4376. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  4377. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  4378. <6>s5p-ehci s5p-ehci: host_phy_susp
  4379. <6>mif: usb_port_resume: 1283, 4
  4380. <6>s5p-ehci s5p-ehci: host_phy_susp
  4381. <6>lcd panel: id=0 brightness=0, bl=1, candela=40
  4382. <7>[TouchKey] sec_touchkey_early_suspend
  4383. <6>powersave_early_suspend: set cpu0 freq in the 200000-1400000 KHz range
  4384. <6>wake enabled for irq 356
  4385. <4>dhd_early_suspend: enter
  4386. <4>dhd_set_suspend: force extra Suspend setting
  4387. <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
  4388. <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10
  4389. <6>k3dh_ioctl: opened = 1, enable = 0
  4390. <6>sii9234_early_suspend()
  4391. <6>mdnie mdnie: +mdnie_early_suspend
  4392. <6>mdnie mdnie: -mdnie_early_suspend
  4393. <6>lcd panel: +ld9040_early_suspend
  4394. <6>lcd panel: ld9040_power_off
  4395. <6>lcd panel: -ld9040_early_suspend
  4396. <6>+s3cfb_early_suspend
  4397. <7>s3cfb - disable power domain
  4398. <6>-s3cfb_early_suspend
  4399. <6>active wake lock PowerManagerService.Broadcasts
  4400. <6>active wake lock wlan_rx_wake, time left 137
  4401. <6>sync_system +
  4402. <6>sync_system -
  4403. <6>suspend: enter suspend
  4404. <6>suspend: enter suspend, (2013-04-21 09:26:28.587790598 UTC)
  4405. <6>PM: Syncing filesystems ... done.
  4406. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  4407. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  4408. <4>Suspending console(s) (use no_console_suspend to debug)
  4409. <7>pmu_debug: 0x00000901
  4410. <7>xusbxti_contrml: 0
  4411. <3>[MODEM_IF]Active States =0, s5p-ehci
  4412. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:27:28
  4413. <6>wake enabled for irq 359
  4414. <6>sec_jack_suspend: enable_irq_wake(0)
  4415. <6>s5p_int_src_ext_hpd()
  4416. <6>audss_reg_Restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  4417. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  4418. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  4419. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  4420. <6>wake enabled for irq 375
  4421. <6>wake enabled for irq 381
  4422. <6>sdhci_suspendWhost : Enter WIFI suspend
  4423. <4>bcmsdh_sdmmc_suspend Enter
  4424. <6>sdhci_suspend_host : MMC Card OFF
  4425. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  4426. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  4427. <6>PM: suspend of devices #omplete after 250.512 mse#s
  4428. <4>suspend_set_state: LED_A_2.8V: Fo configuration
  4429. <6>PM: late suspend of devices complete after 0.571 msecs
  4430. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  4431. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  4432. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  4433. <7>platform_pm_suspendOnoirq: s3c2440-i2c.6-
  4434. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  4435. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  4436. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  4437. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  4438. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  4439. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  4440. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  4441. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  4442. <7>platform_pm_suspend_noirq: power.0+
  4443. <6>power_suspend_late return"0
  4444. <7>platform_pm_suspend_noirq: power.0-
  4445. <6>PM:"noirq suspenD of devices complete after 1.262 msecs
  4446. <4>Disabling non-boot CPUs ...
  4447. <1>PM: SLEEP
  4448. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  4449. <6>WAKEUP_STAT: 0x80000001
  4450. <6>WAKEUP_INTz_PEND: 0x80, 0x0, 0x0, 0x0
  4451. <6>Resume caused by IRQ 359, max8997-irq
  4452. <6>PM: noirq resume of devices complete after 1.302 msecs
  4453. <3>calc_bus_utilization: 0 value is not permitted
  4454. <3>calc_bus_utilization: 0 value is not permitted
  4455. <6>PM: early resume Of devices complete after 0&843 msecs
  4456. <6>u1_enable_regulator_fOrWusb_mipi: enable LDOs
  4457. <6>epynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  4458. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  4459. <6>sdhci_resumg_host : MMC Card ON
  4460. <4>bcmsdh_sdmmc_resume Enter
  4461. <4>bcmsdh_sdmmc_rEsume Enter
  4462. <6>wake disabled for irq 375
  4463. 47>[keys]PWR 0
  4464. <6>wake disabled for irq 381
  4465. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  4466. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  4467. <6>audss_clk_enable(1): SRC[0x1]- DIV[0xf11], GATE[0x1c7]
  4468. <6>wakeup wake lock: sec-battery-monitor
  4469. <6>sec_jack_resume: disable_irq_wake(0)
  4470. <6>wake disabled for irq 359
  4471. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  4472. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  4473. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  4474. <4>max8997 5-0066: Unused interrupt source: 0x0
  4475. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  4476. <6>[MODEM_IF]Slave Wake
  4477. <6>mif: set hsic lpa phy init: slave wake-up (1)
  4478. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4479. <4>usb usb1: root hub lost power or"was reset
  4480. <3>[MODEM_IF]Active States =1, s5p-ehci
  4481. <7>pmu_debug: 0x00000900
  4482. <6>mif: link_pm_irq_handler: ignore request by suspending
  4483. <6>mif: usb_port_resume: 1281, 0
  4484. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  4485. <6>mi&: liok_pm_irq_handler:!ignore request by suspending
  4486. <6>mif: link_pm_runtime_start: rpm_status: 0
  4487. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  4488. <6>PM: resume of devices comp,e4e after 478.969 msecs
  4489. <6>mif: iodev_netif_wake: rmnet0
  4490. <6>mif: iodev_netif_wake: ronet1
  4491. <6>mif: iodev_natif_wake: rmnet2
  4492. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  4493. <4>Restarting tasks ...
  4494. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  4495. <4>or surrounding temp is low.
  4496. <6>notify_change_of_tmu_state: 5event: 0, name = TMUSTATE=0
  4497. <6>normal: free cpufreq_limit & interrupt enable.
  4498. <4>done.
  4499. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  4500. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializinG
  4501. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  4502. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:27:28.315444414 UTC)
  4503. <6>suspend: enter suspend
  4504. <6>suspend: enter suspend, (0013-04-21 09:27:29.454613270 UTC)
  4505. <6>PM: Syncing filesystems ... done.
  4506. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  4507. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>Suspending console(s) (use no_console_suspend to debug)
  4508. <7>pmu_debug: 0x00000901
  4509. <7>xusbxti_control: 0
  4510. <3>[MODEM_IF]Active States =0, s5p-ehci
  4511. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:37:57
  4512. <6>wake enabled for irq 359
  4513. <6>sec_jack_suspend: enable_irq_wake(0)
  4514. <6>s5p_int_src_ext_hpd()
  4515. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  4516. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  4517. <6>wake enabled for irq 375
  4518. <6>wake enabled for irq 381
  4519. <6>sdhci_suspend_host : Enter WIFI suspend
  4520. <4>bcmsdh_sdmmc_suspend Enter
  4521. <6>sdhci_suspend_host : MMC Card OFF
  4522. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  4523. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  4524. <6>PM: suspend of devices complete after 230.537 msecs
  4525. <4>suspend_set_state: LED_A_2.8V: No configuration
  4526. <6>PM: late suspend of devices complete after 0.560 msecs
  4527. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  4528. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  4529. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  4530. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  4531. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  4532. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  4533. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  4534. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  4535. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  4536. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  4537. <7>platform_pm_suspend_noirq  s3c2440-i2c.0+
  4538. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  4539. <7>platform_pm_suspend_noirq: power.0+
  4540. <6>power_suspend_late return 0
  4541. <7>platform_pm_suspend_noirq: power.0-
  4542. <6>PM: noirq su3pend of devices complete after 1.262 msecs
  4543. <4>Disabling non-boot CPUs ...
  4544. <1>PM: SLEEP
  4545. <1>ARM_COBExWSTATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  4546. <6>WAKEUP_STAT: 0x80000001
  4547. <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0
  4548. <6>Resume caused by IRQ 361, hostwake
  4549. <6<mif: link_pm_irq_handler: ignore repuest by suspending
  4550. <6>wakeup wakE lock: l2_hs)c
  4551. <6>PM: noirq resume of devices complete after 1.302 msecs
  4552. <3>calc_bus_utilization: 0 value is not permitted
  4553. <3>calc_bus_utilization: 0 value is not permitted
  4554. <6>PM: early resume of devices complete after 0.628 msecs
  4555. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  4556. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  4557. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  4558. <6>sdhci_resume_host : MMC Card ON
  4559. <4>bcmsdh_sdmmc_resume Enter
  4560. <4>bcmsdh_sdmmc_resume Enter
  4561. <6>wake disabled for irq 375
  4562. <7>[keys]PWR 0
  4563. <6>wake disabled for irq 381
  4564. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  4565. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  4566. <6>audss_clk_enable(1):  RC[0x1], DIV[0xf11], GATE[0x1c7]
  4567. <6>sec_jack_resume: disable_irq_wake(0)
  4568. <6>wake disabled for irq 359
  4569. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  4570. <6>mif: set hsic lpa phy init: slave wake-up (1)
  4571. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4572. <4>usb usb1: root hub lost power or was reset
  4573. <3>[MODEM_IF]Active States =1, s5p-ehci
  4574. <7>pmu_debug: 0x00000900
  4575. <6>mif: usb_port_resume: 1281, 0
  4576. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  4577. <6>mif: link_pm_irq_handler: ignore request by suspending
  4578. <2>mif: link_pm_runtime_start: rpm_status: 0
  4579. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  4580. <6>PM: resume of devices complete after 478.857 msecs
  4581. <6>mif: iodev_netif_wake: rmnet0
  4582. <6>mif: iodev_netif_wake: rmneT1
  4583. <6>mif: io$evWnetif_wake: rmnet2
  4584. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  4585. <4>Restarting tasks ...
  4586. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  4587. <6>normal: free cpufreq_limit & interrupt enable.
  4588. <4>done.
  4589. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  4590. <6 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  4591. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  4592. <6>suspend: exit suspend, ret = 0 (2013-04%21 09:27:30/317958866 UTC)
  4593. <3>** Up_Threshold is changed to 50 **
  4594. <6>wake lock umts_ipc0, expired
  4595. <6>wake lock l2_hsic, expired
  4596. <6>suspend: enter suspend
  4597. <6>suspend: enter suspend, (2013-04-21 09:27:30.893290799 UTC)
  4598. <6>PM: Syncing filesystems ... done.
  4599. <4>Freezing user space processes ... (elapsed 0.0! seconds) done.
  4600. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  4601. <4>Suspending console(s) (use no_console_suspend to debug)
  4602. <7>pmu_debug: 0x00000901
  4603. <7>xusbxti_control: 0
  4604. <3>[MODEM_IF]Active States =0, s5p-ehci
  4605. 6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:37:57
  4606. <6>wake enabled for irq 359
  4607. <6>sec_jack_suspend: enable_irq_wake(0)
  4608. <6>s5p_int_src_ext_hpd()
  4609. <6>audss_reg_save: SRC[0x1]. DIV[0xf11], GATG[0x42]
  4610. <6>audss_clk_enable(0): SRC[0p1], DIV[0xf11], GATE[0x42]
  4611. <6>wake enabled for irq 375
  4612. <6>wake eNabled for irq 381
  4613. <6>sdhci_suspend_host : Enter WIFI suspend
  4614. <4>bcmsdh_sdmmc_suspend Enter
  4615. <6>sdhci_suspend_host : MMC Card OFF
  4616. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  4617. <6>exynos4_setup_mshci_set_pkwer : internal MMC Card OFF samsung-mshc.
  4618. <6>PM: suspend of devices complete after 250.559 msecs
  4619. <4>suspend_set_state: LED_A_2.8V: No configuration
  4620. <6>PM: late suspend of devices complete after 0.538 msecs
  4621. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  4622. < >pLatform_pm_suspend_noirq: s3c2440-i2c.7-
  4623. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  4624. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  4625. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  4626. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  4627. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  4628. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  4629. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  4630. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  4631. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  4632. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  4633. <7>plapform_pm_suspend_noirq: power.0+
  4634. <6>power_suspend_late return 0
  4635. <7>platform_pm_suspend_noirq: power.0-
  4636. <6>PM: noirq suspend of devices complete after 1.273 msecs
  4637. <4>Disabling non-boot CPUs ...
  4638. <1>PM: SLEEP
  4639. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  4640. <6>WAKEUP_STAT: 0x80000001
  4641. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0
  4642. <6>Resume caused by IRQ 373, bcmsdh_sdmmc
  4643. <6>PM: noirq resume of devices complete after 1.300 msecs
  4644. <6>wakeup wake lock: wlan_wake
  4645. <3>calc_bus_utilization: 0 valqe is not permitted
  4646. <3>calc_bus_utilization: 0 value is not permitted
  4647. <6>PM: early resume of devices complete after 0.724 msecs
  4648. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  4649. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  4650. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  4651. <6>sdhci_resume_host : MMC Card ON
  4652. <4>bcmsdh_sdmmc_resume Enter
  4653. <4>bcmsdh_sdmmc_resume Enter
  4654. <6>wake disabled for irq 375
  4655. <7>[keys]PWR 0
  4656. <6>wake disabled for irq 381
  4657. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  4658. <6>audss_reg_restore* SRC[0x1], DIV[0xf11], GATE[0x42]
  4659. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  4660. <6>sec_jack_resume: disable_irq_wake(0)
  4661. <6>wake disabled for irq 359
  4662. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  4663. <6>[MODEM_IF]Slare Wake
  4664. <6>mif: set hsic lpa phy init: slave wake-up (1)
  4665. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4666. <4>usb usb1: root hub lost power or was reset
  4667. <3>[MODEM_IF]Active States =1, s5p-ehci
  4668. <7>pmu_debug: 0x00000900
  4669. <6>mif: link_pm_irq_handler: ignobe request by cuspending
  4670. <6>mif: usb_qort_resume: 1281, 0
  4671. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  4672. <6>mif: link_pm_irq_handler: ignore request by suspending
  4673. <6>mif: link_pm_runtime_start: rpm_status: 0
  4674. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  4675. <6>PM: resume of devices complete after 495.638 msecs
  4676. <6>mif: iodev_netif_wake: rmnet0
  4677. <6>mif: iodev_netif_wake: rmnet1
  4678. <6>mif: iodev_netif_wake: rmnet2
  4679. <6>mif: link_rx_flowctl_cmd: fl/wctl CMD_RESUME(00CB)
  4680. =4>Restarting tasks ...
  4681. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  4682. <6>normal: free cpufreq_limit & interrupt enable.
  4683. <4>done.
  4684. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  4685. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:27:34.326471451 UTC)
  4686. <6>sec-battery sec-batt%ry: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  4687. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  4688. <3>init: untracked pid 29020 exited
  4689. <3>init: untracked pid 29697 exited
  4690. <6>wake lock wlan_rx_wake, expired
  4691. <6>wake lock l2_hsic, expired
  4692. <6>suspend: enter suspend
  4693. <6>suspend: enter suspend, (2013-04-21 09:27:35.294251838 UTC)
  4694. <6>PM: Syncing filesystems ... done.
  4695. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  4696. <4>Freezing remaijing freezable tasks ... (elapsed 0.01 seconds) done.
  4697. <4>Suspending console(s) (use no_console_suspend to debug)
  4698. <7>pmu_debug: 0x00000901
  4699. <7>xusbxti_control: 0
  4700. <3>[MODEM_IF]Active States =0, s5p-ehci
  4701. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:37:57
  4702. <6>wake enabled for irq 359
  4703. <6>sec_jack_suspend: enable_irq_wake(0)
  4704. <6>s5p_int_src_ext_hpd()
  4705. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  4706. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  4707. <6>wake enabled for irq 375
  4708. <6>wake enabled for irq 381
  4709. <6>Sdhci_suspend_host : Enter WIFI suspend
  4710. <4>bcmsdh_sdmmc_suspend Enter
  4711. <6>sdhci_suspend_host : MMC Card OFF
  4712. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  4713. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  4714. <6>PM: suspend of devices complete after 253.890 msecs
  4715. <4>suspend_set_state: LED_A_2.8V: No configuration
  4716. <6>PM: late suspend of devices complete after 0.552 msecs
  4717. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  4718. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  4719. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  4720. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  4721. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  4722. <7>platform_pm_suspend_noirq: s3b2440-i2c.5-
  4723. <7>platfor-_pm_suspend_noirq: s3c2440-i2c.3+
  4724. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  4725. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  4726. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  4727. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  4728. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  4729. <7>platform_pm_suspend_noirq: power.0+
  4730. <6>power_suspend_late return 0
  4731. <7>platform_pm_suspenD_noirq: power.0-
  4732. <6>PM: noirq suspend of devices complete after 1.239 msecs
  4733. <4>Disabling non-boot CPUs ...
  4734. <1>PM: SLEEP
  4735. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  4736. <6>WAKEUP_STAT: 0x80000001
  4737. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0820, 0x0
  4738. <6>Resume caused by IRQ 373, bcmsdh_sdmmc
  4739. <6>PM: noirq resume of devices complete after 1.298 msecs
  4740. <6>wakeup wake lock: wlal^wake
  4741. <6>PM: early resume of devices complete after 0.625 msecs
  4742. <6>u1_enable_regulator_forWusb_mipi: enable LDOs
  4743. <3>calc_bus_utilization: 0 value is not permitted
  4744. <3>calc_bus_utilization: 0 value is not permitted
  4745. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  4746. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  4747. <6>sdhci_resume_host : MMC Card ON
  4748. <4>bcmsdh_sdmmc_resume Enter
  4749. <4>bcmsdh_sdmmc_resume Enter
  4750. <6>wake disabled for irq 375
  4751. <7>[keys]PWR 0
  4752. <6>wake disabled for irq 381
  4753. <6>s3c-rtc exynos-rtc: rtc disabled, re-en!blin'
  4754. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  4755. <6>audss_clk_enable(1): SRC[0X1], DIV[0xf11], GATE[0x1c7]
  4756. <6>sec_jack_resume: disable_irq_wake(0)
  4757. <6>wake disabled for irq 359
  4758. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x1" /0x564):
  4759. <6>[MODEM_IF]Slave Wake
  4760. <6>mif: set hsic lpa phy init: slave wake-up (1)
  4761. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4762. <4>usb usb1: root hub lost power or was reset
  4763. <3>[MODEM_IF]Active States =1, s5p-ehci
  4764. <7>pmu_debug: 0x00000900
  4765. <6>mif: link_pm_irq_handler: ignore request by suspending
  4766. <6>mif: usb_port_resume: 1281, 0
  4767. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  4768. <6>mif: link_pm_irq_handler: ignore request by suspending
  4769. <6>mif: link_pm_runtime_start: rpm_status: 0
  4770. <6>mif: link_pm_runtime[start: EHCI runtime s5p-ehci, s5p-ehci
  4771. <6>PM: resume of devices complete after 495.716 msecs
  4772. <6>mif: iodev_netif_wake: rmnet0
  4773. <6>mif: iodev_netif_wake: rmnet1
  4774. <6>mif: iodev_netif_wake: rmnet2
  4775. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  4776. <4>Restarting tasks ...
  4777. < >temperature code is in inaccurate -->check if vdd_18_ts is on
  4778. <4>or surrounding temp is low.
  4779. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  4780. <6>normal: free cpufreq_limit & interrupt enable.
  4781. <4>done.
  4782. <6>sec-battery sec-bavtery: sec_bAt_check_temper: recowery count = 0
  4783. <6>sec-battery sec-battery: sec_bat_charging_timg_management: charging_start_time has never been used since initializing
  4784. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  4785. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:30:43.328752951 UTC)
  4786. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  4787. <4>or surrounding temp is low.
  4788. <6>suspend: enter suspend
  4789. <6>suspend: enter suspend, (2013-04-21 09:30:44.372577263 UTC)
  4790. <6?PM: SyncIng filesystems ... done.
  4791. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  4792. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  4793. <4>Suspending console(s) (use no_console_suspend to debug)
  4794. <7>pmu_debug: 0x00000901
  4795. <7>xusbxti_contr/l: 0
  4796. <3>[MODEM_IF]Active States =0, s%p-ehci
  4797. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:37:58
  4798. <6>wake enabled for irq 359
  4799. <6>sec_jack_suspend: enable_irq_wake(0)
  4800. <6>s5p_int_src_ext_hpd()
  4801. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  4802. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  4803. <6>waKe enabled for irq 375
  4804. <6>wake enabled for irq 381
  4805. <6>sdhci_suspend_host : Enter WIFI suspend
  4806. <4>bcmsdh_sdmmc_suspend Enter
  4807. <6>sdhci_suspend_host : MMC Card OFF
  4808. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  4809. <6>exynos4_setup_mshci_set_power ; internal MMC Card OFF samsung-mshc.
  4810. <6>PM: suspend of devices complete after 250.563 msecs
  4811. <4>suspend_set_state: LED_A_2.8V: No configuration
  4812. <6>PM: late suspend of devices complete after 0.555 msecs
  4813. <7>platforo_pm_suspendWnoirq: s3c2440-i2c.7+
  4814. <7>platfora_pm_suspend_noirq: s3c2440-i2c.7-
  4815. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  4816. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  4817. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  4818. <7>plapform_pm_suspend_noirq: s3c2440-i2c.5-
  4819. <7>platform_pm¬suspend_noirq: s3c2440-i2c.3+
  4820. <7>Platform_pm_suspend_noirq: s3c2440-i2c.3-
  4821. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  4822. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  4823. <7>platform_pm_suspend_noirq: s3c2440-i2c.2+
  4824. <7>platform_pM_sespend_noirq: c3c2440-i2c.0
  4825. <7>platform_pm_suspend_noirq: power.1+
  4826. <6>po7er_swspend_late return 0
  4827. <7>platform_pm_suspend_noirq: power.0-
  4828. <6>PM: noirq suspend of devices complete after 1.265 msecs
  4829. <4>Disabling non-boot CPUs ...
  4830. <1>PM: SLEEP
  4831. <1>CRM_COREx_SPATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  4832. <6>WAKEUP_STAT: 0x80000001
  4833. <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0
  4834. <6>Resume caused by IRQ 359, max8997-irq
  4835. <6>PM: noirq resume of devices complete after 1.300 msecs
  4836. <3>calc_bus_utilization: 0 value is not permitted
  4837. <3>calc_bus_utilization: 0 value is fot permitted
  4838. <6>PM: early resume of devices complete after 0.828 msecs
  4839. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  4840. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  4841. <6>oec0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  4842. <6>sdhci_resume_host : MMC Card ON
  4843. <6>wakeup wake lock: wlan_wake
  4844. <4>bcmsdh_sdmmc_resume Enter
  4845. <4>bcmsdh_sdmmc_resume Enter
  4846. <6>wake disabled for irq 375
  4847. <7>[keys]PWR 0
  4848. <6>wake disabled for irq 381
  4849. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  4850. <6>audss_r g_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  4851. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  4852. <6>sec_jack_resume: disable_irq_wake(0)
  4853. <6>wake disabled for irq 359
  4854. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  4855. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  4856. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
  4857. <4>max8997 5-0066: Unused interrupt source: 0x0
  4858. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/2x564):
  4859. <6>[MODEM_IF]Slave Wake
  4860. <6>mif: set hsic lpa phy init: slave wake-up (1)
  4861. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4862. <4>usb usb1: root hub lost power or was reset
  4863. <3>[MODEM_IF]Active States =1, s5p-ehci
  4864. <7>pmu_debug: 0x00000900
  4865. <6>mif: link_pm_irq_handler: ignore request by suspending
  4866. <6>mif: usb_port_resume: 0281, 0
  4867. <6>usb 1-2* reset high speed USB device number 3 using s5p-ehci
  4868. <6>mif: link_pm_irq_handler: ignore request by suspending
  4869. <6>mif: link_pm_runtime_start: rpm_status: 0
  4870. <6>mif: link_pm_runtime_start: EHCI ruNtime s5p-Ehci, s5p-ehci
  4871. <6>PM: resu-e of devices complete after 4)5.654 msecs
  4872. <6>mif: iodev_netif_wake: rmnet0
  4873. <6>mif: iodev_netif_wake: rmnet1
  4874. <6>mif: iodev_netif_wake: rmnet2
  4875. <6>mif: link_rx_flowctl_cmd: flfwctl CMD_RESUME(00CB)
  4876. <4>Restarting tasks ...
  4877. <4>temperatuRe code is in inaccurate -->check if vdd_18_ts is on
  4878. <4>or surrounding temp is low.
  4879. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  4880. <6>normal: free cpufreq_limit & interrupt enable.
  4881. <4>done.
  4882. <6>sec-battery sec-battery: sec_bat_checK_temper: recovery count = 0
  4883. <6>Sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  4884. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 083
  4885. <6>suspend: exit suspend, ret = 0 (2003-04-21 09:37:58.331580199 UTC)
  4886. <6>s5p%ehci s5p-ehci: host_phy_susp
  4887. <7>mif: set_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x11c/0x184):
  4888. <6>mif: set hsic lpa enter: active state (0), pda active (0)
  4889. <6>suspend: enter suspend
  4890. <6>suspend: enter suspend, (2013-04-21 09:38:03.413612002 UTC)
  4891. <6>PM: Syncing filesystems ... done.
  4892. <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot
  4893. <4>Freezing user space processes ...
  4894. <6>active wake lock wlan_rx_wake, time left 94
  4895. <4>
  4896. <3>Freezing of user space  aborted
  4897. <4>
  4898. <4>Restarting tasks ... done.
  4899. <6>mif: lijk_pm_notifier_event: PDA active low to LPA GPIO state
  4900. <6>suspend: exit suspend, ret = -16 (2013-04-21 09:38:03.449869965 UTC)
  4901. <6>active wake lock wlan_rx_wake, time left 93
  4902. <6>suspend: abort suspend
  4903. <7>mif: set_hshc_lpa_states: 279: called(s5p_usb_phy_resume+0x62c/0x65c):
  4904. <6>mif: set hsic lpa wake: pda active (1)
  4905. <4>usb usb1: root hub lost power or was reset
  4906. <3>[MODEM_IF]Active States =1, s5p-ehci
  4907. <6>mif: usb_port_resume: 1281, 0
  4908. <6>usb 1-2: reset high spee` USB device number 3 using s5p-ehci
  4909. <6>mif: link_pm_runtime_start: rpm_status: 0
  4910. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  4911. <6>mif: iodev_netif_wake: rmnet0
  4912. <6>mif: iodev_netif_wake: rmnet1
  4913. <6>mif: iode4_netif_w`ke: rmnet2
  4914. <6>mif: link]rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  4915. <6>wake lock l2_hsic, expired
  4916. <6>suspend: enter suspend
  4917. <6>suspend: enter suspend, (2013-04-21 09:38:04.049882149 UTC)
  4918. <6>PM: Syncing filesystems ... done.
  4919. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  4920. <4>Freezing remaininf freezable tasks ... (elapsed 0.01 seconds) done.
  4921. <4>Suspending console(s) (use no_console_suspend to debug)
  4922. <7>pmu_debug: 0x00000901
  4923. <7>xusbxti_control: 0
  4924. <3>[MODEM_IF]Active States =0, s5p-ehci
  4925. <6>max8997-rtc max8997-rtc: max8997_rpc_set_alarm: 2013-04-21 09:40:51
  4926. <6>wake enabled for irq 359
  4927. <6>sec_jack_suspend: enable_irq_wake(0)
  4928. <6>s5p_int_src_ext_hpd()
  4929. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  4930. <6>audqs_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  4931. <6>wake enabled for irq 375
  4932. <6>wake enabled for irq 381
  4933. <6>sdhci_suspend_host : Enter WIFI suspend
  4934. <4>bcmsdh_sdmmc_suspend Enter
  4935. <6>sdhci_suspend_host : MMC Card OFF
  4936. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  4937. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-lshc.
  4938. <6>PM: suspend /f devices complete after 227.478 msecs
  4939. <4>suspend_set_state: LED_A_2.8V: No configuration
  4940. <6>PM: late suspend of devices complete after 0.564 msecs
  4941. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  4942. <7>platform_p-_suspend_noirq: s3c2440-i2c.7-
  4943. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  4944. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  4945. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  4946. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  4947. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  4948. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  4949. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  4950. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  4951. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  4952. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  4953. <7>platform_pm_suspend_noirq: pkwer.0+
  4954. <6>active wake lock wlao_wake
  4955. <6>power_suspend_late return -11
  4956. <7>platform_pm_suspend_noirq: power.0-
  4957. <3>dpm_run_callback(): platform_pm_suspend_noirq+0x0/0x8c returns -11
  4958. <3>PM: Device power.0 failed to suspend noirq: error -11
  4959. <6>PM: noirq resume of devices complete after 0.618 msecs
  4960. <6>PM: early suspend of devices complete after 0.356 msecs
  4961. <3>PM: Some devices failed to power down
  4962. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  4963. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsuog-mshC.
  4964. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  4965. <6>sdhci_resume_host : MMC Card ON
  4966. <4>bcmsdh_sdmmc_resume Enter
  4967. <4>bcmsdh_sdmmc_resume Enter
  4968. <6>wake disabled for irq 375
  4969. <7>[keys]PWR 0
  4970. <6>wake disabled for irq 381
  4971. <6>s3c-ruc exynos-rtc: rtc disabled, re-enabling
  4972. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  4973. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  4974. <6>sec_jack_resume: disable_irq_wake(0)
  4975. <6>wake disabled for irq 359
  4976. <7>mif: set_hsic_lpa_states: 279: calleD(s5p_usb_phy_init+0x138/0x564):
  4977. <6>[MODEM_IF]Slave Wake
  4978. <6>mif: set hsic lpa phy init: slave wake-up (1)
  4979. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  4980. <4>usb usb1: root hub lost power or was reset
  4981. <3>[MODEM_IF]Active States =1, s5p-ehci
  4982. <7>pmu_debug: 0x00000900
  4983. <6>mif: link_pm_irq_handler: ignore request by suspending
  4984. <6>mif: usb_port_resume: 1281, 0
  4985. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  4986. <6>mif: link_pm_irq_handler: ignore request by suspending
  4987. <6>mif: link_pe_runtime_start: rpm_status: 0
  4988. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  4989. <6>PM: resume of devices complete after 480.065 msecs
  4990. <4>Restarting tasks ...
  4991. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  4992. <4>or surrounding temp is low.
  4993. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  4994. <4>done.
  4995. <6>sec-bAttery sec-batpery: sec_bat_check_temper: recovery count = 0
  4996. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since )nitializing
  4997. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  4998. <6>suspend: exit suspend, ret = -11 (2013-04-21 09:38:04.814316643 UTC)
  4999. <6>normal: free cpufreq_limit & interrupt enable.
  5000. <6>wake lock l2_hsic, expired
  5001. <6>suspend: enter suspend <6>suspend: enter suspend, (2013/04-21 09:38:05.051419875 UTC)
  5002. <7>PM: Syncing filesystems ... done.
  5003. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  5004. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  5005. <4>Suspending console(s) (use no_console_suspend to debug)
  5006. <7>pmu_deBug: 0x00000901
  5007. >7>xusbxti_coNtrol: 0
  5008. <3>[MODEM_IF]Active States =0, s5p-ehci
  5009. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:40:51
  5010. <6>wake enabled for irq 359
  5011. <6>sec_jack_suspend: enable_irq_wake(0)
  5012. <6>s5p_int_src_ext_hpd()
  5013. <6.audss_reg_save: SRC[0x1], DIV[0xf11], GATE[2x42]
  5014. <6>audss_#lk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  5015. <6>wake enabled for irq 375
  5016. <6>wake enabled for irq 381
  5017. <6>sdhci_suspend_host : Enter WIFI suspend
  5018. <4>bcmsdh_sdmmc_suspend Enter
  5019. <6>sdhci_suspend_host : MMC Card OFF
  5020. <6>e1¬enablE_regulator_for_usb_mIpi: disable LDOs
  5021. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  5022. <6>PM: suspend of devices complete after 253.883 msecs
  5023. <4>suspend_set_state: LED_A_2.8V: No configuration
  5024. <6>PM: date suspend of devices complete after 0.534 msecs
  5025. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  5026. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  5027. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  5028. <7>platform_pm_suspend_Noirq: s3c2440-i2c.6-
  5029. <7>platform_pm_suspend_noirq: s3c2440-i2c&5+
  5030. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  5031. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  5032. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  5033. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  5034. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  5035. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  5036. <7>platform_pm_suspend_noibq: s3c2440-i2c.0-
  5037. <7>platform_pm_suspend_noirq: power.0+
  5038. <6>power_suspend_late return 0
  5039. <7>platform_pm_suspend_noirq: power.0-
  5040. <6>PM: noirq suspend kf devices colplete after 1.277 msecs
  5041. <4>Disabling non-boot CPUs ...
  5042. <1>PM: SLEEP
  5043. <1>ARM_COREx_STATUS CORE1[0x00070000], CO E2[0x00000000], CORE3[0x00000000]
  5044. <6>WAKEUP_STAT: 0x80000001
  5045. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0
  5046. <6>Resume caused by IRQ 373, `cmsdh_sdmmc
  5047. <6>PM: noirq resume of devices colplete after 1.299 msecs
  5048. <6>wakeup wake lock: wlan_wake
  5049. <3>calc_bus_utilization: 0 value is not permitted
  5050. <3>calc_bus_utilization: 0 value is not permitted
  5051. <6>PM: early resume of devices complete after 0.708 msecs
  5052. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  5053. <6>exynos4_setup_mshci_seT_power : internal MMC Card ON samsung-mshc.
  5054. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  5055. <6>sdhci_resume_host : MMC Card ON
  5056. <4>bcmsdh_sdmmc_resume Enter
  5057. <4>bcmsdh_sdmmc_rdsume Enter
  5058. <6>wake disabled for irq 375
  5059. <7>[keys]PWR 0
  5060. <6>wake disabled for ira 38
  5061. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  5062. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  5063. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  5064. <6>sec_jack_resume: disa"le_irq_wake(0)
  5065. <6>wake disabled for irq 359
  5066. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  5067. <6>[MODEM_IF]Slave Wake
  5068. <6>mif: set hsic lpa phy init: slave wake-up (1)
  5069. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  5070. <4>usb usb1: root hub lost power or was reset
  5071. <3>[MODEM_IF]Active States =1, s5p-ehci
  5072. <7>pmu_debug: 0x00000900
  5073. <6>mif: linj¬pm_irq_handler: ignore request by suspending
  5074. <6>mif: usb_port_resume: 1281, 0
  5075. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  5076. <6>mif: link_pm_irq_handler: ignorE request by suspending
  5077. <6>mif: link_pm_runtime_start: rpm_status: 0
  5078. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  5079. <6>mif: iodev_netif_wake: rmnet0
  5080. <6>mif: iodev_netif_wake: rmnet1
  5081. <6>mif: iodev_netif_wake: rmnet2
  5082. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  5083. <&>PM: resume of devices complete after 500.863 msecs
  5084. <4>Restarting tasks ...
  5085. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5086. <4>or surrounding temp is low.
  5087. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  5088. <4>done.
  5089. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  5090. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  5091. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  5092. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:39209.331826367 UTC)
  5093. <6>normal: free cpufreq_limit & interrupt enable.
  5094. <6>wake lock wlan_rx_wake, expired
  5095. <6>wake lock l2_hsic, expired
  5096. <6>suspend: enter suspend
  5097. <6>suspend: enter suspend, (2013-04-21 09:39:09.998616434 UTC)
  5098. <6>PM: Syncing filesystems ... done.
  5099. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  5100. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  5101. <4>Suspending console(s) (use no_console_suspend to debug)
  5102. <7>pmu_debug: 0x000 0901
  5103. <7>xusbxti_control: 0
  5104. <3>[MODEM_IF]Active States =0, s5p-ehci
  5105. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:40:52
  5106. <6>wake enabled for irq 359
  5107. <6>sec_jack_suspend: enable_irq_wake(0)
  5108. <6>s5p_int_src_ext_hpd()
  5109. <6>audss_reg_save: SRC[0x1], DIV[0xf11U, GATE[0x42]
  5110. <6>audss_#lk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  5111. <6>wake enabled for irq 375
  5112. <6>wake enabled for irq 381
  5113. <6>sdhci_suspend_host : Enter WIFI suspend
  5114. <4>bcmsdh_sdmmc_suspend Enter
  5115. <6>sdhci_suspeNd_host : MMC Card OFF
  5116. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  5117. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  5118. <6>PM: suspend of devices complete after 250.560 msecs
  5119. <4>suspend_set_state: LED_A_2.8V: No configuration
  5120. <66PM: late suspend of devices complete after 0.561 msecs
  5121. <7>platform_pm[suspend_noirq: s3c2440-i2c.7+
  5122. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  5123. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  5124. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  5125. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  5126. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  5127. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  5128. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  5129. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  5130. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  5131. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  5132. <7>platform_pm_suspend_noirq: s3c2440-i2C.0-
  5133. <7>platform_pm_suspend_noirq: power.0+
  5134. <6>power_suspend_late return 0
  5135. <7>platform_pm_suspend_noirq: power.0-
  5136. <6>PM: noirq suspend of devices complete after 1.243 msecs
  5137. <4>Disabling non-boot CPUs ...
  5138. <1>PM: SLEEP
  5139. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  5140. <6>WAKEUP_STAT: 0x80000001
  5141. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0
  5142. <6>Resume caused by IRQ 373, bcmsdh_sdmmc
  5143. <6>PM: noirq resume of devices complete after 1.301 msecs
  5144. <6>wakeup wake lock: wlan_wake
  5145. <6>PM: early resume of devices complete after 0.628 msecs
  5146. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  5147. <3>calc_bus_utilization: 0 value is not permitted
  5148. <3>calc_bus_utilization: 0 value is not permitted
  5149. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  5150. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  5151. <6>sdhci_resume_host : MMC Card ON
  5152. <4>bcmsdh_sdmmc_resume Enter
  5153. <4>bcmsdh_sdmmc_resume Enter
  5154. <6>wake disa"led for irq 375
  5155. <7>[keys]PWR 0
  5156. <6>wake disabled for irq 381
  5157. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  5158. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  5159. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  5160. <6>sec_jack_resume: disable_irq_wake(0)
  5161. <6>wake disabled for irq 359
  5162. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  5163. <6>[MODEM_IF]Slave Wake
  5164. <6>mif: set hsic lpa phy init: slave wake-up (1)
  5165. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  5166. <4>usb usb1: root hub lost power or was reset
  5167. <3>[MODEM_IF]Active States =1, s5p-ehci
  5168. <7>pmu_debug: 0x00000900
  5169. <6>mif: link_pm_irq_handler: ignore request by suspending
  5170. <6>mif: usb_port_resume: 1281, 0
  5171. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  5172. <6>mif: link_pm_irq_handler: ignore request by suspending
  5173. <6>mif: link_pm_runtime_start: rpm_status: 0
  5174. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  5175. <6>PM: resume of devices complete after 495.147 msecs
  5176. <6>mif: iodev_netif_wake: rmnet0
  5177. <6>mif: iodev_netif_wake: rmnet1
  5178. <6>mif: iodev_nEtif_wake: rmnet2
  5179. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  5180. <4>Restarting tasks ...
  5181. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5182. <4>or surrounding temp is low.
  5183. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5184. <4>or surrounding temp is low.
  5185. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  5186. <6>normal: free cpufreq_limit & interrupt enable.
  5187. <4>done.
  5188. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  5189. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  5190. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  5191. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:39:17.328619491 UTC)
  5192. <6>wake lock wlan_rx_wake, expired
  5193. <6>wake lock l2_hsic, expired
  5194. <6>suspend: enter suspend
  5195. <6>suspend: enter suspend, (2013-04-21 09:39:18.087764106 UTC)
  5196. <6>PM: Syncing filesystems ... done.
  5197. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  5198. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  5199. <4>Suspending console(s) (use no_console_suspend to debug)
  5200. <7>pmu_debug: 0x00000901
  5201. <7>xusbxti_control: 0
  5202. <3>[MODEM_IF]Active States =0, s5p-ehci
  5203. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:40:51
  5204. <6>wake enabled for irq 359
  5205. <6>sec_jack_suspend: enable_irq_wake(0)
  5206. <6>s5p_int_src_ext_hpd()
  5207. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  5208. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  5209. <6>wake enabled for irq 375
  5210. <6>wake enabled for irq 381
  5211. <6>sdhci_suspend_host : Enter WIFI suspend
  5212. <4>bcmsdh_sdmmc_suspend Enter
  5213. <6>sdhci_suspend_host : MMC Card OFF
  5214. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  5215. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsunG-mshc.
  5216. <6>PM: suspend of devices complete after 250.554 msecs
  5217. <4>suspend_set_state: LED_A_2.8V: No configuration
  5218. <6>PM: late suspend of devices complete after 0.541 msecs
  5219. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  5220. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  5221. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  5222. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  5223. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  5224. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  5225. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  5226. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  5227. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  5228. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  5229. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  5230. <7>platform_pm_suspend_noirq: power.0+
  5231. <6>power_suspend_late return 0
  5232. <7>platform_pm_suspend_noirq: power.0-
  5233. <6>PM: noirq suspend of devices complete after 1.295 msecs
  5234. <4>Disabling non-boot CPUs ...
  5235. <1>PM: SLEEP
  5236. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  5237. <6>WAKEUP_STAT: 0x80000001
  5238. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0p20, 0x0
  5239. <6>Resume caused by IRQ 373, bcmsdh_sdmmc
  5240. <6>PM: noirq resume of devices complete after 1.302 msecs
  5241. <6>wakeup wake lock: wlan_wake
  5242. <3>calc_bus_utilization: 0 value is not permitted
  5243. <3>calc_bus_u4ilization: 0 value is not permitted
  5244. <6>PM: early resume of devices complete after 0.628 msecs
  5245. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  5246. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  5247. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  5248. <6>sdhci_resume_host : MMC Card ON
  5249. <4>bcmsdh_sdmmc_resume Enter
  5250. <4>bcmsdh_sdmmc_resume Enter
  5251. < >wake disabled for irq 375
  5252. <7>[keys]PWR 0
  5253. <6>wake disabled for irq 381
  5254. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  5255. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  5256. <6>audss_clk_enable(!): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  5257. <6>sec_jack_resume: disable_irq_wake(0)
  5258. <6>wake disabled for irq 359
  5259. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  5260. <6>[MODEM_IF]Slave Wake
  5261. <6>mif: set hsic lpa phy init: slave wake-up (1)
  5262. <6>s5p-ehci s5p-ehci: uSb phy usage(2)
  5263. <4>usb usb1: root hub lost power or was reset
  5264. <3>[MODEM_IF]Active States =1, s5p-ehci
  5265. <7>pmu_debug: 0x00000900
  5266. <6>mif: link_pm_irq_handler: ignore request by suspending
  5267. <6>mif: usb_port_resume: 1281, 0
  5268. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  5269. <6>mif: link_pm_irq_handler: ignore request by suspending
  5270. <6>mif: link_pm_runtime_start: rpm_status: 0
  5271. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  5272. <6>mif: iodev_netif_wake: rmnet0
  5273. <6>mif: iodev_netif_wake: rmnet0
  5274. <6>mif: iodev_netif_wake: rmnet2
  5275. <6>mIf: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  5276. <6>PM: resume of devices complete after 497.198 msecs
  5277. <4>Restarting tasks ...
  5278. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5279. <4>or surrounding temp )s low.
  5280. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  5281. <4>done.
  5282. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  5283. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since ini4ializing
  5284. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  5285. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:39:26.328447949 UTC)
  5286. <6>normal: free cpufreq_limit & interrupt enable.
  5287. <6>wake lock wlan_rx_wake, expIred
  5288. <6>wake lock l2_hsic, expired
  5289. <6>suspend: enter suspend
  5290. <6>suspend: enter suspend, (2013-04-21 09:39:26.998565644 UTC)
  5291. <6>PM: Syncing filesystems ... done.
  5292. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  5293. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  5294. <4>Suspending console(s) (use no_console_suspend to debug)
  5295. <7>pmu_debug: 0x00000901
  5296. <7>xusbxti_control: 0
  5297. <3>[MODEM_IF]Active States =0, s5p-ehci
  5298. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:40:51
  5299. <6>wake enabled for irq 359
  5300. <6>sec_jack_suspend: enable_irq_wake(0)
  5301. <6>s5p_int_src_ext_hpd()
  5302. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  5303. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  5304. <6>wake enabled for Irq 375
  5305. <6>wake enabled for irq 381
  5306. <6<sdhci_suspend_host : Enter WIFI suspend
  5307. <4>bcmsdh_sdmmc_suspend Enter
  5308. <6>sdhci_suspend_host : MMC Card OFF
  5309. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  5310. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  5311. <6>PM: suspend of devices complete after 250.548 msecs
  5312. <4>suspend_set_state: LED_A_2.8V: No configuration
  5313. <6>PM: late suspend of devices complete after 0.556 msecs
  5314. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  5315. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  5316. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  5317. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  5318. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  5319. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  5320. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  5321. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  5322. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  5323. <7>platform_pm_susrend_noirq: s3c2440-i2c.1-
  5324. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  5325. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  5326. <7>platform_pm_suspend_noirq: power.0+
  5327. <6>power_suspend_late return 0
  5328. <7>platforM_pm_suspend_noirq: power.0-
  5329. <6>PM: noirs suspend of devices complete after 1.245 msecs
  5330. <4>Disabling non-boot CPUs ...
  5331. <1>PM: SLEEP
  5332. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  5333. <6>WAKEUP_STAT: 0x80000001
  5334. <6>WAKEUP_INTx_PEND: 0x80,  x0, 0x0, 0x0
  5335. <2>Resume caused by IRQ 359, max8997-irq
  5336. <6>PM: noirq resume of devices complete after 1.299 msecs
  5337. <3>calc_bus_utilization: 0 value is not permitted
  5338. <3>calc_bus_utilization: 0 value is not permitted
  5339. <6>PM: early resume of devices complete after 0.823 msecs
  5340. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  5341. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  5342. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  5343. <6>sdhci_resume_josp : MMC Card ON
  5344. < >bcmsdh_sdmmc_resume Enter
  5345. <4>bcmsdh_sdmmc_resume Enter
  5346. <6>wake disabled for irq 375
  5347. <7>[keys]PWR 0
  5348. <6>wake disabled for irq 381
  5349. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  5350. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  5351. <6>audss_clK_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  5352. <6>wakeup wake lock: sec-battery-monitor
  5353. <6>sec_jack_resume: disable_irq_wake(0)
  5354. <6>wake disabled for irq 359
  5355. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
  5356. <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
  5357. <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:080
  5358. <4>max8997 5-0066: Unused interrupt source: 0x0
  5359. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  5360. <6>[MODEM_IF]Slave Wake
  5361. <6>mif: set hsic lpa phy inIt: slave wake-up (1)
  5362. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  5363. <4?usb usb1: root hub lost power or was reset
  5364. <3>[MODEM_IF]Active States =1, s5p-ehci
  5365. <7>pmu_debug: 0x00000900
  5366. <6>mif: link_pm_irq_handler: ignore request by suspending
  5367. <6>mif: usb_port_resume: 1281, 0
  5368. <6>usb 1-2: reset high speed USB device number 3 using s5p-eh#i
  5369. <6>mif: link_pm_irq_handler: i'nore request by suspending
  5370. <6>mif: link_pm_runtime_start: rpm_status: 0
  5371. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  5372. <6>PM: resume of devices complete after!492.153 msecs
  5373. <6>mif: iodev_netif_wake: rmnet0
  5374. <7>mif: iodev_netif_wake: rmnet1
  5375. <6>mif: iodev_netif_wake: rmnet2
  5376. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  5377. <4>Restarting tasks ...
  5378. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5379. <4>or surrounding temp is low.
  5380. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  5381. <6>normal: free cpufreq_limit & interrupt enable.
  5382. <4>done.
  5383. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  5384. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been usEd since initializing
  5385. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  5386. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:40:51.325356325 UTC)
  5387. <6>active wake lock alarm, time left 1500
  5388. <6>suspend: abort suspend
  5389. <6>s5p-ehci s5p-ehci: host_phy_susp
  5390. <7>mif: set_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x11c/0x184):
  5391. <6>mif: set hsic lpa enter: active state (0), pda active (0)
  5392. <4>temperatqre code is in inaccurate -->check if vdd_18_ts is on
  5393. <4>or surrounding temp is low.
  5394. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5395. <4>or surrounding temp is low.
  5396. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5397. <4>or surrounding temp is low.
  5398. <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=250
  5399. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5400. <4>or surrounding temp is low.
  5401. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  5402. <6>sec-battery sec-"attery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  5403. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  5404. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5405. <4>or surrounding temp is low.
  5406. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5407. <4>or surrounding temp is low.
  5408. <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=230
  5409. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5410. <4>or surroundiNg temp iS low.
  5411. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5412. <4>or surrounding temp is low.
  5413. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  5414. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  5415. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  5416. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5417. <4>or surrounding temp is lOw.
  5418. <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=250
  5419. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5420. <4>or surrounding temp is low.
  5421. <6>wake lock wlan_rx_wake, expired
  5422. <6>suspend: enter suspend
  5423. <6>suspend: enter suspend, (2013-04-21 09:42:31.531027726 UTC)
  5424. <6>PM: Syncing filecystems ... done.
  5425. <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot
  5426. <4>Freezing user space processes ... (elapsed 0.01 seconds) done.
  5427. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  5428. <4>Suspending console(s) (use no_console_suspend to debug)
  5429. <7>pmu_debug: 0x00000901
  5430. <7>xusbxti_control: 0
  5431. <3>[MODEM_IF]Active States =0, s5p-ehci
  5432. <6>max8997-rtc max8997-rtc: max8997_rtC_set_alare: 2013-04-21 09:45:42
  5433. <6>wake enabled for irq 359
  5434. <6>sec_jack_suspend: enable_irq_wake(0)
  5435. <6>s5p_int_src_exT_hpd()
  5436. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  5437. <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
  5438. <6>wake enabled for irq 375
  5439. <6>wake enabled for irq 381
  5440. <6>sdhci_suspend_host : Enteb WIFI suspend
  5441. <4>bcmsdh_sdmmc_suspend Entdr
  5442. <6>sdhci_suspend_host : MMC Card OFF
  5443. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  5444. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.
  5445. <6>PM: suspend of devices complete after 227.205 msecs
  5446. <4>suspend_set_state: LED_A_2.8V: No configuration
  5447. <6>PM: late suspend of devices complete after 0.567 msecs
  5448. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  5449. <7>platform_pm_suspend_noirq: s3c2440-i2c.7-
  5450. <3>platform_pm_suspend_noirq: s3c2440-i2c.6+
  5451. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  5452. <7>platform_pm_suspend_noirq: s3c2440-i2c.5+
  5453. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  5454. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  5455. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  5456. <7>platform_pm_suspeNd_noirq: s3c2440-i2c.1+
  5457. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  5458. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  5459. <7>platform_pm_suspend_noirq: s3c2440-i2c.0-
  5460. <7>platform_pm_suspend_noirq: power.0+
  5461. <6>power_suspend_late return 0
  5462. <7>platform_pm_suspend_noirq: power.0-
  5463. <6>PM: noirq suspend of devices complete after 1.263 msecs
  5464. <4>Disabling non-boot CPUs ...
  5465. <1>PM: SLEEP
  5466. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  5467. <6>WAKEUP_STAT: 0x80000001
  5468. <6>WAKEUP_INTx_PEND: 0x0, 0X2, 0x0, 0x0
  5469. <6>Resume caused by IRQ 361, Hostwake
  5470. <6>mif: link_pm_irq_handler: ignore request by suspending
  5471. <6>wakeup wake lock: l2_hsic
  5472. <6>PM: noirq resume of devices complete after 1.301 msecs
  5473. <3>calc_bus_utilization: 0 value is nod permitted
  5474. <3>calc_bus_utilizatIon: 0 value is not permitted
  5475. <6>PM: early resume of devices complete after 0.628 msecs
  5476. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  5477. <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.
  5478. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  5479. <6>sdhci_resEme_host : MMC Card ON
  5480. <4>bcmsdh_sdmmc_resume Enter
  5481. <4>bcmsdh_sdmmc_resume Enter
  5482. <6>wake disabled for irq 375
  5483. <7>[keys]PWR 0
  5484. <6>wake disabled for irq 381
  5485. <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling
  5486. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  5487. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  5488. <6>sec_jack_resume: disable_irq_wake(0)
  5489. <6>wake disabled for irq 359
  5490. <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564):
  5491. <6>mif: set hsic lpa phy init: slave wake-up (1)
  5492. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  5493. <4>usb usb1: root hub lost power or was reset
  5494. <3>[MODEM_IF]Active States =1, s5p-ehci
  5495. <7>pmu_debug: 0x00000900
  5496. <6>mif: usb_port_resume: 1281, 0
  5497. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  5498. <6>mif: link_pm_irq_handler: ignore request by suspending
  5499. <6>mif: link_pm_runtime_start: rpm_status: 0
  5500. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  5501. <6>PM: resume of devices complete after 478.726 msecs
  5502. <6>mif: iodev_netif_wake: rmnet0
  5503. <6>mif: kodev_netif_wake: rmnet1
  5504. < >mif: iodev_netif_wake: rmnet2
  5505. <&>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  5506. <6>mif: iodev_netif_wake: rmnet0
  5507. <6>mif: iodev_netif_wake: rmnet1
  5508. <6>mif: iodev_netif_wake: rmnet2
  5509. <6>mif: link_rx_flowcth_cmd: flowctl CMD_RESUME(00CB)
  5510. <4:Restarting tasks ...
  5511. <4>tempe2ature code is kn inaccurate -->check if vdd_18_ts is on
  5512. <4>or surrounding temp is low.
  5513. <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  5514. <6>normal: free cpufreq_limit & interrupt enable.
  5515. <4>done.
  5516. <6>sec-battery sec-battery: sec_bat_check_temper: racovery count = 0
  5517. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
  5518. <6>max8922-charger max8922-charger: max8922_is_charging: chargijg state = 0x3
  5519. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:42:32.318715951 UTC)
  5520. ,6>wake lock umts_ipc0, expired
  5521. <6>wake lock l2_hsic, expired
  5522. <6>suspend: enter suspånd
  5523. <6>suspend: enter suspend, (2013-04-21 09:42:32.802510504 UTC)
  5524. <6>PM: Syncing filesystems ... done.
  5525. <4>Freezing!user space p"ocesses ... (elapsed 0.01 secon&s) done.
  5526. <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  5527. <4>Suspending console(s) (use no_console_suspend to debug)
  5528. <7>pmu_debug: 0x0000 901
  5529. <7>xusbxti_control: 0
  5530. <3>[MODEM_IF]Active States =0, s5p-ehci
  5531. <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-04-21 09:45:43
  5532. <6>wake enabled for irq 359
  5533. <6>sec_jack_suspend: enable_irq_wake(0)
  5534. <6>s5p_int_src_ext_hpd()
  5535. <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
  5536. <6>audss_clk_enable(0): SSC[0x1], DIV[0xf11], GATE[0x42]
  5537. <6>wake enabled for irq 375
  5538. <6>wake enabled for irq 381
  5539. <6>sdhci_suspend_host : Enter WIFI suspend
  5540. <4>bcmsdh_sdmmc_suspend Enter
  5541. <6>sdhci_suspend_host : MMC!Casd OFF
  5542. <6>u1_enable_regulator_for_usb_mipi: disable LDOs
  5543. <6>exynos4_setup_mshci_set_power : internal MMC Card OFF saisung-mshc.
  5544. <6>PM: suspend of devices complete after 250.537 msecs
  5545. <4>suspend_set_state: LED_A_2.8V: No configuration
  5546. <6>PM: late suspend of devices complete after 0.556 msecs
  5547. <7>platform_pm_suspend_noirq: s3c2440-i2c.7+
  5548. <7>platform_rm_suspend_noirq: s3c2440-i2c.7-
  5549. <7>platform_pm_suspend_noirq: s3c2440-i2c.6+
  5550. <7>platform_pm_suspend_noirq: s3c2440-i2c.6-
  5551. <7>platform_pm_suspend_noirq: s3c2442-i2c.5+
  5552. <7>platform_pm_suspend_noirq: s3c2440-i2c.5-
  5553. <7>platform_pm_suspend_noirq: s3c2440-i2c.3+
  5554. <7>platform_pm_suspend_noirq: s3c2440-i2c.3-
  5555. <7>platform_pm_suspend_noirq: s3c2440-i2c.1+
  5556. <7>platform_pm_suspend_noirq: s3c2440-i2c.1-
  5557. <7>platform_pm_suspend_noirq: s3c2440-i2c.0+
  5558. <7>platform_pm_suspend_noirq: s3c2440-i2c&0-
  5559. <7>platform_pm_suspend_noirq: power.0+
  5560. <6>power_suspend_late return 0
  5561. <7>platform_pm_suspend_noirq: power.0-
  5562. <6>PM: noirq suspend of devices complete after 1.268 msecs
  5563. <4>Disabling non-boot CPUs ...
  5564. <1>PM: SLEEP
  5565. <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000]
  5566. <6>WAKEUP_STAT: 0x80000001
  5567. <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x0, 0x44
  5568. <6>Resume caused by IRQ 378, sec_headset_detect
  5569. <6>Resume caused by IRQ 382, gpio_keys
  5570. <6>PM: noirq resuma of devices complete after 1.303 msecs
  5571. <6>wakeu0 wake lock: gpio_input
  5572. <3>calc_bus_uTilization: 0 value is not permitted
  5573. <3>calc_bus_utilization: 0 value is not permitted
  5574. <6>PM: early resume of devices complete after 0.629 msecs
  5575. <6>u1_enable_regulator_for_usb_mipi: enable LDOs
  5576. <6>exyno34_setup_mshci_set_power : internal MMC Card ON samsung,mshc.
  5577. <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
  5578. <6>sdhci_resume_host : MMC Card ON
  5579. <4>bcmsdh_sdmmc_resume Enter
  5580. <4>bcmsdh_sdmmc_resume Enter
  5581. <6>wake disabled for ir1 375
  5582. <7>[keys]PWR 0
  5583. <6>wake disabled for arq 381
  5584. <6>s3c-rTc exynos-rtc: rtc disabled, re-enabling
  5585. <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
  5586. <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
  5587. <6>sec_jack_resume: disable_irq_wake(0)
  5588. <6>wake disabled for irq 359
  5589. <7>mif: set_hsic_lpa_sta4es: 279: called(s5p_usbWphy_init+0x128/0x564):
  5590. <6>[MODEM_IF]Slave Wake
  5591. <6>mif: set hsic lpa phy init: slave wake-up (1)
  5592. <6>s5p-ehci s5p-ehci: usb phy usage(2)
  5593. <4>usb usb1: root hub lost power or was 2eset
  5594. <3>[MODEM_IF]Active States =1, s5p-ehci
  5595. <6>mif: link_pm_ir1_handler: ignore request by suspending
  5596. <7>pmu_debug: 0x00000900
  5597. <6>mif: usb_port_resume: 1281, 0
  5598. <6>wake disabled for irq 382
  5599. <6>sec_jack_set_type : jack_type = 0
  5600. <6>usb 1-2: reset high speed USB device number 3 using s5p-ehci
  5601. <6>mif: link_pm_irq_handler: ignore request by suspending
  5602. <6:mif: link_pm_runtime_start: rpm_status: 0
  5603. <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
  5604. <6>PM: resume of devices complete after 491.975 msecs
  5605. <6>mif: iodev_neTif_wake: rmnet0
  5606. <6>mif: iodev_netif_wake: rmnet1
  5607. <6>mif: iodev_netif_wake: rmnet2
  5608. <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB)
  5609. <4>Restarting tasks ...
  5610. <4>temperature code is in inaccurate -->check if vdd_18_ts is on
  5611. <4>or surrounding temp is low.
  5612. <6>notify_cha.ge_of_tmu_state: uevent: 0, name = TMUSTATE=0
  5613. <6>normal: free cpufreq_limit & interrupt enable.
  5614. <4>done.
  5615. <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
  5616. <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used sinCe initializing
  5617. <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
  5618. <6>suspend: exit suspend, ret = 0 (2013-04-21 09:43:43.331935786 UTC)
  5619. <6>active wake lock power-supply
  5620. <6>active wAke lock PowerManagerService
  5621. <6>active wake lock l2_hsic
  5622. <6>active wake lock event9-2618
  5623. <6>active wake lock sec_jack_det, time left 1400
  5624. <6>active wake lock alarm, time left 1402
  5625. <6>suspend: abort suspend
  5626. Ibl: pbl_read_emmc441() read 8k
  5627. Ibl: pbl_read_emmc441() read 96k
  5628. Ibl: pbl_read_emmc441() read download info
  5629. Ibl: pbl_read_emmc441() endop
  5630. Ibl: jump() verify_binary_integrity...ok
  5631. Ibl: jump() jump!!!
  5632.  
  5633. Welcome to Samsung Primitive Bootloader.
  5634. build time: Sep  5 2012 09:26:38
  5635. current time: f/1/3 2:5:70
  5636.  
  5637. [set_mmc_ocr] Sector Mode
  5638. [hsmmc_init] MMC card is detected
  5639. Product Name : VIS00M
  5640. <display_card_info:1009> ext_csd
  5641. <display_card_info:1011>card_size: 15028
  5642. Total Card Size: 15029 MByte
  5643.  
  5644. mmc_init: card initialization completed!
  5645. pbl found bootable sbl in #53248.
  5646. jump to sbl 0x4d400000.
  5647.  
  5648. Secondary Bootloader v3.1 version.
  5649. Copyright (C) 2011 System S/W Group. Samsung Electronics Co., Ltd.
  5650. Board: C1 REV 02 / Sep  5 2012 09:26:43
  5651. current time: f/1/3 2:5:71
  5652.  
  5653. booting code=0xa66
  5654. [set_mmc_ocr] Sector Mode
  5655. [hsmmc_init] MMC card is detected
  5656. Product Name : VIS00M
  5657. CID:150100 56495330 304d0974 973fc48f
  5658. <display_card_info:1046> ext_csd
  5659. <display_card_info:1048>card_size: 15028
  5660. Total Card Size: 15029 MByte
  5661.  
  5662. Total Sector Count: 30777344
  5663.  
  5664. MoviNand Initialization Complete!
  5665. ===== PARTITION INFORMATION =====
  5666. ID         : GANG (0x0)
  5667. DEVICE     : MMC
  5668. FIRST UNIT : 0
  5669. NO. UNITS  : 0
  5670. =================================
  5671. ID         : BOOT (0x1)
  5672. DEVICE     : MMC
  5673. FIRST UNIT : 0
  5674. NO. UNITS  : 0
  5675. =================================
  5676. ID         : EFS (0x4)
  5677. DEVICE     : MMC
  5678. FIRST UNIT : 8192
  5679. NO. UNITS  : 40960
  5680. =================================
  5681. ID         : SBL1 (0x2)
  5682. DEVICE     : MMC
  5683. FIRST UNIT : 49152
  5684. NO. UNITS  : 2560
  5685. =================================
  5686. ID         : SBL2 (0x3)
  5687. DEVICE     : MMC
  5688. FIRST UNIT : 53248
  5689. NO. UNITS  : 2560
  5690. =================================
  5691. ID         : PARAM (0x5)
  5692. DEVICE     : MMC
  5693. FIRST UNIT : 57344
  5694. NO. UNITS  : 16384
  5695. =================================
  5696. ID         : KERNEL (0x6)
  5697. DEVICE     : MMC
  5698. FIRST UNIT : 73728
  5699. NO. UNITS  : 16384
  5700. =================================
  5701. ID         : RECOVERY (0x7)
  5702. DEVICE     : MMC
  5703. FIRST UNIT : 90112
  5704. NO. UNITS  : 16384
  5705. =================================
  5706. ID         : CACHE (0x8)
  5707. DEVICE     : MMC
  5708. FIRST UNIT : 106496
  5709. NO. UNITS  : 204800
  5710. =================================
  5711. ID         : MODEM (0x9)
  5712. DEVICE     : MMC
  5713. FIRST UNIT : 311296
  5714. NO. UNITS  : 32768
  5715. =================================
  5716. ID         : FACTORYFS (0xa)
  5717. DEVICE     : MMC
  5718. FIRST UNIT : 344064
  5719. NO. UNITS  : 1048576
  5720. =================================
  5721. ID         : DATAFS (0xb)
  5722. DEVICE     : MMC
  5723. FIRST UNIT : 1392640
  5724. NO. UNITS  : 4194304
  5725. =================================
  5726. ID         : UMS (0xc)
  5727. DEVICE     : MMC
  5728. FIRST UNIT : 5586944
  5729. NO. UNITS  : 24133632
  5730. =================================
  5731. ID         : HIDDEN (0xd)
  5732. DEVICE     : MMC
  5733. FIRST UNIT : 29720576
  5734. NO. UNITS  : 1048576
  5735. =================================
  5736. loke_init: j4fs_open..success
  5737. <start_checksum:1033>CHECKSUM_HEADER_SECTOR :42
  5738. <start_checksum:1035>offset:42, size:1024
  5739. Not Need Movinand Checksum
  5740. load_lfs_parameters valid magic code and version.
  5741. switch_sel_str='1'
  5742. load_debug_level: read debug level successfully(0x574f4c44)...LOW
  5743. init_ddi_data: usable ddi data.
  5744. init_fuel_gauge : not por status
  5745. fuel_gauge_get_version: [1]=0, [0]=92
  5746. init_fuel_gauge: vcell = 3917 mV, vfocv = 3989 mV, soc = 78
  5747. microusb_get_attached_device: STATUS1:0x3f, 2:0x0
  5748. microusb_get_attached_device: STATUS1:0x3f, 2:0x0
  5749. 7276 = (389700 - 337808)*14022/100000
  5750. [2] 395516 = (7276 * 100000) / 16565 + 351593
  5751. init_microusb_ic: MUIC: CONTROL1:0x0
  5752. init_microusb_ic: MUIC: CONTROL1:0x0
  5753. init_microusb_ic: MUIC: CONTROL2:0x3a
  5754. init_microusb_ic: MUIC: CONTROL2:0x3a
  5755. reading nps status file is successfully!.
  5756. nps status=0x504d4f43
  5757. PMIC_IRQSRC  = 0x2
  5758. PMIC_IRQ1    = 0xb
  5759. PMIC_IRQ2    = 0x1c
  5760. PMIC_IRQ3    = 0x0
  5761. PMIC_IRQ4    = 0x13
  5762. PMIC_STATUS1 = 0x1
  5763. PMIC_STATUS2 = 0x10
  5764. PMIC_STATUS3 = 0x0
  5765. PMIC_STATUS4 = 0x0
  5766. bootloader base address=0x4d400000
  5767. LPDDR0 1st. cached=0x40000000, size=0xe400000
  5768. LPDDR0 non-cached=0x4e400000, size=0xa00000
  5769. LPDDR0 2nd. cached=0x4ee00000, size=0x1200000
  5770. RST_STAT = 0x10000
  5771. get_hwrev() = 14
  5772. board_process_platform: MAGIC a66 at 40000000!
  5773. scan_keypad_level: pressed key is 2
  5774. scan_keypad_level: pressed key is 2
  5775. scan_keypad_level: pressed key is 2
  5776. microusb_get_attached_device: STATUS1:0x3f, 2:0x0
  5777. microusb_get_attached_device: STATUS1:0x3f, 2:0x0
  5778. microusb_get_attached_device: STATUS1:0x3f, 2:0x0
  5779. microusb_get_attached_device: STATUS1:0x3f, 2:0x0
  5780. hw_pm_status: jig_status = 0, chg_status = 0
  5781. s5p_set_high_clk: ARM Clock = 800MHz.
  5782. ......kernel is non signed binary.
  5783. DISPLAY_PATH_SEL[MDNIE 0x1]is on
  5784. div:2, FB_SOURCE_CLOCK:667000000, FB_PIXEL_CLOCK:25067520
  5785. MDNIE setting Init start!!
  5786. vsync interrupt is off
  5787. video interrupt is off
  5788. [fb0] turn on
  5789. MDNIE setting Init end!!
  5790.  
  5791. Autoboot (0 seconds) in progress, press any key to stop
  5792. boot_kernel: debug level low!
  5793. checkbit: find RECOVERY
  5794. checkbit (0)
  5795. ......kernel is non signed binary.
  5796. ATAG_CORE: 5 54410001 0 0 0
  5797. MEMCONFIG: 20e01323 20e01323
  5798. ATAG_MEM: 4 54410002 10000000 40000000
  5799. ATAG_MEM: 4 54410002 10000000 50000000
  5800. ATAG_MEM: 4 54410002 10000000 60000000
  5801. ATAG_MEM: 4 54410002 10000000 70000000
  5802. ATAG_SERIAL: 4 54410006 973fc48f 304d0974
  5803. ATAG_REVISION: 3 54410007 e
  5804. hardware_ID : 000974973fc48f
  5805. ATAG_CMDLINE: 40 54410009 'loglevel=4 console=ram androidboot.serialno=000974973fc48f sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x0 consoleblank=0 lpj=3981312 vmalloc=144m'
  5806. ATAG_NONE: 0 0
  5807.  
  5808. Starting kernel at 0x40008000...
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!