dmesg

root@xbian:/home/xbian# tail -50 /var/log/dmesg
smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e3:69:a8
usb 1-1.3: new full-speed USB device number 4 using dwc_otg
usb 1-1.3: New USB device found, idVendor=0471, idProduct=0815
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: eHome Infrared Transceiver
usb 1-1.3: Manufacturer: Philips
usb 1-1.3: SerialNumber: PH00NN9J
 mmcblk0: p1 p2
 mmcblk0: p1 p2
device label xbian-root-btrfs devid 1 transid 18 /dev/mmcblk0p2
btrfs: use lzo compression
btrfs: enabling auto defrag
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
btrfs: new size for /dev/mmcblk0p2 is 3928489984
device label xbian-root-btrfs devid 1 transid 18 /dev/mmcblk0p2
device label xbian-root-btrfs devid 1 transid 18 /dev/mmcblk0p2
init: frandom pre-start process (266) terminated with status 1
init: mounted-proc main process (273) terminated with status 1
FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device label xbian-root-btrfs devid 1 transid 19 /dev/mmcblk0p2
udevd[334]: starting version 175
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 2 device(s) ...
Adding 40956k swap on /dev/zram0.  Priority:20 extents:1 across:40956k SS
loop: module loaded
Registered IR keymap rc-rc6-mce
input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0/input0
rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 248
input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input1
IR MCE Keyboard/mouse protocol handler initialized
rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
IR LIRC bridge handler initialized
mceusb 1-1.3:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
mceusb 1-1.3:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
usbcore: registered new interface driver mceusb
device label xbian-root-btrfs devid 1 transid 19 /dev/mmcblk0p2
mousedev: PS/2 mouse device common for all mice
smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Adding 122876k swap on /dev/loop0.  Priority:0 extents:1 across:122876k
init: failsafe main process (621) killed by TERM signal
smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
init: xbmc-norun main process (631) killed by TERM signal