.macaddr=B8:27:EB:D6:66:AD sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty2 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait logo.nologo quiet loglevel=0 splash
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 786432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 384MB = 384MB total
[    0.000000] Memory: 380688k/380688k available, 12528k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05148fc   (5171 kB)
[    0.000000]       .init : 0xc0515000 - 0xc0539dac   ( 148 kB)
[    0.000000]       .data : 0xc053a000 - 0xc05701a0   ( 217 kB)
[    0.000000]        .bss : 0xc05701c4 - 0xc06186cc   ( 674 kB)
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty2] enabled
[    0.000389] Calibrating delay loop... 464.48 BogoMIPS (lpj=2322432)
[    0.060049] pid_max: default: 32768 minimum: 301
[    0.060382] Mount-cache hash table entries: 512
[    0.061135] Initializing cgroup subsys cpuacct
[    0.061162] Initializing cgroup subsys memory
[    0.061221] Initializing cgroup subsys devices
[    0.061235] Initializing cgroup subsys freezer
[    0.061246] Initializing cgroup subsys blkio
[    0.061327] CPU: Testing write buffer coherency: ok
[    0.061647] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    0.061753] Setting up static identity map for 0x3b3ad8 - 0x3b3b34
[    0.063287] devtmpfs: initialized
[    0.072212] NET: Registered protocol family 16
[    0.077146] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.078284] bcm2708.uart_clock = 0
[    0.079734] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.079753] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.079766] mailbox: Broadcom VideoCore Mailbox driver
[    0.079839] bcm2708_vcio: mailbox at f200b880
[    0.079922] bcm_power: Broadcom power driver
[    0.079940] bcm_power_open() -> 0
[    0.079950] bcm_power_request(0, 8)
[    0.580623] bcm_mailbox_read -> 00000080, 0
[    0.580640] bcm_power_request -> 0
[    0.580651] Serial: AMBA PL011 UART driver
[    0.580781] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.601138] bio: create slab <bio-0> at 0
[    0.602011] SCSI subsystem initialized
[    0.602237] usbcore: registered new interface driver usbfs
[    0.602342] usbcore: registered new interface driver hub
[    0.602603] usbcore: registered new device driver usb
[    0.604026] Switching to clocksource stc
[    0.604261] FS-Cache: Loaded
[    0.604528] CacheFiles: Loaded
[    0.617506] NET: Registered protocol family 2
[    0.618343] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.618784] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.619040] TCP: Hash tables configured (established 16384 bind 16384)
[    0.619086] TCP: reno registered
[    0.619106] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.619136] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.619410] NET: Registered protocol family 1
[    0.620045] RPC: Registered named UNIX socket transport module.
[    0.620070] RPC: Registered udp transport module.
[    0.620080] RPC: Registered tcp transport module.
[    0.620089] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.620393] Trying to unpack rootfs image as initramfs...
[    0.856937] Freeing initrd memory: 1988K
[    0.857604] bcm2708_dma: DMA manager at f2007000
[    0.857708] bcm2708_gpio: bcm2708_gpio_probe c0547e68
[    0.858107] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    0.859102] audit: initializing netlink socket (disabled)
[    0.859172] type=2000 audit(0.850:1): initialized
[    0.979894] VFS: Disk quotas dquot_6.5.2
[    0.979983] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.980399] FS-Cache: Netfs 'nfs' registered for caching
[    0.980777] NFS: Registering the id_resolver key type
[    0.980896] Key type id_resolver registered
[    0.980912] Key type id_legacy registered
[    0.981262] msgmni has been set to 747
[    0.983357] io scheduler noop registered
[    0.983381] io scheduler deadline registered
[    0.983413] io scheduler cfq registered (default)
[    0.988844] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.988865] crc32: self tests passed, processed 225944 bytes in 2592000 nsec
[    0.990784] crc32c: CRC_LE_BITS = 64
[    0.990797] crc32c: self tests passed, processed 225944 bytes in 929000 nsec
[    1.028283] Console: switching to colour frame buffer device 240x67
[    1.063142] brd: module loaded
[    1.068598] loop: module loaded
[    1.068986] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
[    1.070332] usbcore: registered new interface driver smsc95xx
[    1.070500] usbcore: registered new interface driver cdc_ncm
[    1.070521] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.275710] Core Release: 2.80a
[    1.275742] Setting default values for core params
[    1.275800] Finished setting default values for core params
[    1.480931] Using Buffer DMA mode
[    1.480955] Periodic Transfer Interrupt Enhancement - disabled
[    1.480967] Multiprocessor Interrupt Enhancement - disabled
[    1.480979] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.480996] Dedicated Tx FIFOs mode
[    1.481221] dwc_otg: Microframe scheduler enabled
[    1.481278] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.481337] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.481407] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.481481] Init: Port Power? op_state=1
[    1.481492] Init: Power Port (0)
[    1.481623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.481648] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.481665] usb usb1: Product: DWC OTG Controller
[    1.481681] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
[    1.481696] usb usb1: SerialNumber: bcm2708_usb
[    1.482525] hub 1-0:1.0: USB hub found
[    1.482577] hub 1-0:1.0: 1 port detected
[    1.482952] dwc_otg: FIQ enabled
[    1.482969] dwc_otg: NAK holdoff enabled
[    1.482993] Module dwc_common_port init
[    1.483238] Initializing USB Mass Storage driver...
[    1.483460] usbcore: registered new interface driver usb-storage
[    1.483476] USB Mass Storage support registered.
[    1.483629] usbcore: registered new interface driver libusual
[    1.483940] mousedev: PS/2 mouse device common for all mice
[    1.484739] bcm2835-cpufreq: min=700000 max=840000 cur=700000
[    1.484877] bcm2835-cpufreq: switching to governor performancebcm2835-cpufreq: switching to governor performance
[    1.485922] cpuidle: using governor ladder
[    1.485941] cpuidle: using governor menu
[    1.486008] sdhci: Secure Digital Host Controller Interface driver
[    1.486018] sdhci: Copyright(c) Pierre Ossman
[    1.486107] sdhci: Enable low-latency mode
[    1.486355] Registered led device: mmc0::
[    1.524266] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    1.524326] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    1.524400] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.524699] usbcore: registered new interface driver usbhid
[    1.524712] usbhid: USB HID core driver
[    1.525535] TCP: cubic registered
[    1.525553] Initializing XFRM netlink socket
[    1.525592] NET: Registered protocol family 17
[    1.525733] Key type dns_resolver registered
[    1.526153] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    1.529066] registered taskstats version 1
[    1.532504] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.540593] Freeing init memory: 144K
[    1.592244] mmc0: could read SD Status register (SSR) at the 2th attempt
[    1.596446] mmc0: new high speed SDHC card at address 0007
[    1.604237] mmcblk0: mmc0:0007 SD08G 7.21 GiB
[    1.606449]  mmcblk0: p1 p2
[    1.674294] Indeed it is in host mode hprt0 = 00021501
[    1.914247] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.914415] Indeed it is in host mode hprt0 = 00001101
[    2.204476] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.204506] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.205366] hub 1-1:1.0: USB hub found
[    2.205496] hub 1-1:1.0: 3 ports detected
[    2.484277] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.584674] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.584698] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.587499] smsc95xx v1.0.4
[    2.648622] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d6:66:ad
[    2.744292] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    2.845193] usb 1-1.2: New USB device found, idVendor=0ccd, idProduct=0058
[    2.845219] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.845234] usb 1-1.2: Product: Cinergy HT XE
[    2.845248] usb 1-1.2: Manufacturer: TerraTec
[    2.845260] usb 1-1.2: SerialNumber: 00000000
[    3.946989] EXT4-fs (mmcblk0p2): recovery complete
[    3.951759] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    7.878839] dvb-usb: found a 'Terratec Cinergy HT USB XE' in cold state, will try to load a firmware
[    8.945646] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[    9.149001] dib0700: firmware started successfully.
[    9.654283] dvb-usb: found a 'Terratec Cinergy HT USB XE' in warm state.
[    9.654553] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    9.656527] DVB: registering new adapter (Terratec Cinergy HT USB XE)
[    9.767853] dib0700: stk7700ph_frontend_attach: dib7000p_i2c_enumeration failed.  Cannot continue
[    9.767853]
[    9.767885] dvb-usb: no frontend was attached by 'Terratec Cinergy HT USB XE'
[    9.814113] Registered IR keymap rc-dib0700-rc5
[    9.814739] input: IR-receiver inside an USB DVB receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0/input0
[    9.814775] rc0: IR-receiver inside an USB DVB receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/rc/rc0
[    9.817341] dvb-usb: schedule remote query interval to 50 msecs.
[    9.817374] dvb-usb: Terratec Cinergy HT USB XE successfully initialized and connected.
[    9.818570] usbcore: registered new interface driver dvb_usb_dib0700
[   12.075470] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   12.565729] bcm2835 ALSA card created!
[   12.565952] bcm2835 ALSA chip created!
[   12.566101] bcm2835 ALSA chip created!
[   12.566247] bcm2835 ALSA chip created!
[   12.566390] bcm2835 ALSA chip created!
[   12.566537] bcm2835 ALSA chip created!
[   12.566682] bcm2835 ALSA chip created!
[   12.566843] bcm2835 ALSA chip created!
[   12.653823] bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
[   15.596170] Adding 127996k swap on /var/swapfile.  Priority:-1 extents:3 across:160764k SS
[   19.402613] Installing knfsd (copyright (C) 1996 [email protected]).
[   20.237099] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   28.497944] watchdog stopped
root@xbian:~#