Pastebin is 300% more awesome when you are logged in. Sign Up, it's FREE!
Guest

Untitled

By: a guest on Mar 15th, 2011  |  syntax: None  |  size: 18.74 KB  |  hits: 256  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. Uncompressing Linux... done, booting the kernel.
  2. [    0.000000] Linux version 2.6.38 (kenm@kenm-i7) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #3 SMP Tue Mar 15 15:35:48 MDT 2011
  3. [    0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387f
  4. [    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [    0.000000] Machine: OMAP4 Panda board
  6. [    0.000000] Reserving 16777216 bytes SDRAM for VRAM
  7. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  8. [    0.000000] OMAP4430 ES2.0
  9. [    0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000
  10. [    0.000000] FIXME: omap44xx_sram_init not implemented
  11. [    0.000000] PERCPU: Embedded 7 pages/cpu @c13db000 s8064 r8192 d12416 u32768
  12. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256000
  13. [    0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext2 rootwait
  14. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  15. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  16. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  17. [    0.000000] Memory: 1008MB = 1008MB total
  18. [    0.000000] Memory: 1011008k/1011008k available, 37568k reserved, 245760K highmem
  19. [    0.000000] Virtual kernel memory layout:
  20. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  21. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  22. [    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
  23. [    0.000000]     vmalloc : 0xf0800000 - 0xf8000000   ( 120 MB)
  24. [    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
  25. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  26. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  27. [    0.000000]       .init : 0xc0008000 - 0xc0044000   ( 240 kB)
  28. [    0.000000]       .text : 0xc0044000 - 0xc06103d0   (5937 kB)
  29. [    0.000000]       .data : 0xc0612000 - 0xc066ebf0   ( 371 kB)
  30. [    0.000000] Hierarchical RCU implementation.
  31. [    0.000000]  RCU-based detection of stalled CPUs is disabled.
  32. [    0.000000] NR_IRQS:402
  33. [    0.000000] clockdomain: l3_dma_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  34. [    0.000000] clockdomain: emu_sys_clkdm: OMAP4 wakeup/sleep dependency support: not yet implemented
  35. [    0.000000] clockdomain: emu_sys_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  36. [    0.000000] clockdomain: l4_wkup_clkdm: OMAP4 wakeup/sleep dependency support: not yet implemented
  37. [    0.000000] clockdomain: l4_wkup_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  38. [    0.000000] clockdomain: l3_dss_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  39. [    0.000000] clockdomain: iss_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  40. [    0.000000] clockdomain: l3_d2d_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  41. [    0.000000] clockdomain: l3_1_clkdm: OMAP4 wakeup/sleep dependency support: not yet implemented
  42. [    0.000000] clockdomain: l3_1_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  43. [    0.000000] clockdomain: l3_2_clkdm: OMAP4 wakeup/sleep dependency support: not yet implemented
  44. [    0.000000] clockdomain: l3_2_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  45. [    0.000000] clockdomain: ducati_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  46. [    0.000000] clockdomain: l4_ao_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  47. [    0.000000] clockdomain: l3_emif_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  48. [    0.000000] clockdomain: mpu1_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  49. [    0.000000] clockdomain: mpu0_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  50. [    0.000000] clockdomain: mpuss_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  51. [    0.000000] clockdomain: l3_init_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  52. [    0.000000] clockdomain: l3_instr_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  53. [    0.000000] clockdomain: abe_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  54. [    0.000000] clockdomain: l4_per_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  55. [    0.000000] clockdomain: l4_secure_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  56. [    0.000000] clockdomain: ivahd_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  57. [    0.000000] clockdomain: l3_gfx_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  58. [    0.000000] clockdomain: tesla_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  59. [    0.000000] clockdomain: l4_cfg_clkdm: OMAP4 wakeup/sleep dependency support: not yet implemented
  60. [    0.000000] clockdomain: l4_cfg_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  61. [    0.000000] clockdomain: l4_cefuse_clkdm: clkdm_clear_all_wkdeps: not yet implemented
  62. [    0.000000] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
  63. [    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
  64. [    0.000000] GPMC revision 6.0
  65. [    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  66. [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  67. [    0.000000] Console: colour dummy device 80x30
  68. [    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  69. [    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
  70. [    0.000000] ... MAX_LOCK_DEPTH:          48
  71. [    0.000000] ... MAX_LOCKDEP_KEYS:        8191
  72. [    0.000000] ... CLASSHASH_SIZE:          4096
  73. [    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
  74. [    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
  75. [    0.000000] ... CHAINHASH_SIZE:          16384
  76. [    0.000000]  memory used by lock dependency info: 3695 kB
  77. [    0.000000]  per task-struct memory footprint: 1152 bytes
  78. [    0.000854] Calibrating delay loop... 2009.29 BogoMIPS (lpj=7847936)
  79. [    0.171936] pid_max: default: 32768 minimum: 301
  80. [    0.172668] Security Framework initialized
  81. [    0.173034] Mount-cache hash table entries: 512
  82. [    0.176605] CPU: Testing write buffer coherency: ok
  83. [    0.177703] L310 cache controller enabled
  84. [    0.177734] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
  85. [    0.180145] CPU1: Booted secondary processor
  86. [    0.180175] CPU1: Unknown IPI message 0x1
  87. [    0.373291] Brought up 2 CPUs
  88. [    0.373291] SMP: Total of 2 processors activated (4022.78 BogoMIPS).
  89. [    0.374420] devtmpfs: initialized
  90. [    0.382995] print_constraints: dummy:
  91. [    0.383666] NET: Registered protocol family 16
  92. [    0.387054] omap_device: omap_gpio.0: new worst case activate latency 0: 61035
  93. [    0.387359] OMAP GPIO hardware version 0.1
  94. [    0.387573] OMAP GPIO hardware version 0.1
  95. [    0.387786] OMAP GPIO hardware version 0.1
  96. [    0.387969] OMAP GPIO hardware version 0.1
  97. [    0.388183] OMAP GPIO hardware version 0.1
  98. [    0.388397] OMAP GPIO hardware version 0.1
  99. [    0.393310] omap_mux_init: Add partition: #1: core, flags: 2
  100. [    0.394561] omap_mux_init: Add partition: #2: wkup, flags: 2
  101. [    0.397399] omap_device: omap_uart.1: new worst case deactivate latency 0: 30517
  102. [    0.397735] omap_device: omap_uart.2: new worst case activate latency 0: 30517
  103. [    0.400665] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  104. [    0.400695] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  105. [    0.400726] hw-breakpoint: maximum watchpoint size is 4 bytes.
  106. [    0.405975] pm_dbg_init: only OMAP3 supported
  107. [    0.406249] OMAP DMA hardware revision 0.0
  108. [    0.433837] bio: create slab <bio-0> at 0
  109. [    0.438049] SCSI subsystem initialized
  110. [    0.442230] usbcore: registered new interface driver usbfs
  111. [    0.442657] usbcore: registered new interface driver hub
  112. [    0.442962] usbcore: registered new device driver usb
  113. [    0.459228] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
  114. [    0.475952] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  115. [    0.476776] twl6030: PIH (irq 39) chaining IRQs 368..387
  116. [    0.499481] print_constraints: VUSB: 3300 mV normal standby
  117. [    0.525787] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
  118. [    0.546386] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
  119. [    0.547637] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
  120. [    0.548645] machine_constraints_voltage: VANA: failed to apply 2100000uV constraint
  121. [    0.551086] twl_reg twl_reg.43: can't register VANA, -22
  122. [    0.551147] twl_reg: probe of twl_reg.43 failed with error -22
  123. [    0.551910] machine_constraints_voltage: VCXIO: failed to apply 1800000uV constraint
  124. [    0.552307] twl_reg twl_reg.44: can't register VCXIO, -22
  125. [    0.552337] twl_reg: probe of twl_reg.44 failed with error -22
  126. [    0.553253] machine_constraints_voltage: VDAC: failed to apply 1800000uV constraint
  127. [    0.553649] twl_reg twl_reg.45: can't register VDAC, -22
  128. [    0.553680] twl_reg: probe of twl_reg.45 failed with error -22
  129. [    0.554687] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
  130. [    0.555877] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
  131. [    0.556213] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
  132. [    0.568481] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
  133. [    0.584106] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
  134. [    0.584533] omap_device: omap_i2c.4: new worst case activate latency 0: 30517
  135. [    0.599731] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
  136. [    0.601623] Advanced Linux Sound Architecture Driver Version 1.0.23.
  137. [    0.605499] Switching to clocksource 32k_counter
  138. [    0.605895] cfg80211: Calling CRDA to update world regulatory domain
  139. [    0.607482] Clockevents: could not switch to one-shot mode:
  140. [    0.607513] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
  141. [    0.607513] Could not switch to high resolution mode on CPU 1
  142. [    0.607513]  dummy_timer is not functional.
  143. [    0.607543] Could not switch to high resolution mode on CPU 0
  144. [    0.656311] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  145. [    0.656951] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
  146. [    0.657440] NET: Registered protocol family 2
  147. [    0.657806] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  148. [    0.659027] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  149. [    0.661682] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
  150. [    0.677124] TCP: Hash tables configured (established 131072 bind 65536)
  151. [    0.677307] TCP reno registered
  152. [    0.677368] UDP hash table entries: 512 (order: 3, 40960 bytes)
  153. [    0.677612] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  154. [    0.678619] NET: Registered protocol family 1
  155. [    0.679443] RPC: Registered udp transport module.
  156. [    0.679443] RPC: Registered tcp transport module.
  157. [    0.679473] RPC: Registered tcp NFSv4.1 backchannel transport module.
  158. [    0.679931] NetWinder Floating Point Emulator V0.97 (double precision)
  159. [    0.821472] highmem bounce pool size: 64 pages
  160. [    0.822021] VFS: Disk quotas dquot_6.5.2
  161. [    0.822174] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  162. [    0.823394] JFFS2 version 2.2. (NAND) (SUMMARY)  �© 2001-2006 Red Hat, Inc.
  163. [    0.823852] msgmni has been set to 1494
  164. [    0.826049] io scheduler noop registered
  165. [    0.826080] io scheduler deadline registered
  166. [    0.826141] io scheduler cfq registered (default)
  167. [    0.828765] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  168. [    1.029846] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  169. [    1.091918] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  170. [    1.162231] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
  171. [    2.237365] console [ttyO2] enabled
  172. [    2.302856] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
  173. [    2.388763] brd: module loaded
  174. [    2.399688] loop: module loaded
  175. [    2.405487] mtdoops: mtd device (mtddev=name/number) must be supplied
  176. [    2.412322] omap2-nand driver initializing
  177. [    2.416961] OneNAND driver initializing
  178. [    2.424591] usbcore: registered new interface driver asix
  179. [    2.430541] usbcore: registered new interface driver cdc_ether
  180. [    2.436920] usbcore: registered new interface driver smsc95xx
  181. [    2.443176] usbcore: registered new interface driver net1080
  182. [    2.449401] usbcore: registered new interface driver cdc_subset
  183. [    2.455841] usbcore: registered new interface driver zaurus
  184. [    2.461761] cdc_ncm: 7-Feb-2011
  185. [    2.465240] usbcore: registered new interface driver cdc_ncm
  186. [    2.472229] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  187. [    2.479522] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  188. [    2.487823] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  189. [    2.521911] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
  190. [    2.537231] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  191. [    2.543823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  192. [    2.550994] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  193. [    2.558593] usb usb1: Product: OMAP-EHCI Host Controller
  194. [    2.564178] usb usb1: Manufacturer: Linux 2.6.38 ehci_hcd
  195. [    2.569885] usb usb1: SerialNumber: ehci-omap.0
  196. [    2.577392] hub 1-0:1.0: USB hub found
  197. [    2.581420] hub 1-0:1.0: 3 ports detected
  198. [    2.615539] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  199. [    2.622558] usbcore: registered new interface driver cdc_wdm
  200. [    2.628540] Initializing USB Mass Storage driver...
  201. [    2.633972] usbcore: registered new interface driver usb-storage
  202. [    2.640319] USB Mass Storage support registered.
  203. [    2.645721] usbcore: registered new interface driver libusual
  204. [    2.652038] usbcore: registered new interface driver usbtest
  205. [    2.659057] mousedev: PS/2 mouse device common for all mice
  206. [    2.667449] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
  207. [    2.680816] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  208. [    2.687347] omap_device: omap_i2c.1: new worst case activate latency 0: 61035
  209. [    2.695495] twl_rtc twl_rtc: Power up reset detected.
  210. [    2.701904] twl_rtc twl_rtc: Enabling TWL-RTC.
  211. [    2.707153] i2c /dev entries driver
  212. [    2.713531] Driver for 1-wire Dallas network protocol.
  213. [    2.720733] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
  214. [    2.727539] twl4030_wdt twl4030_wdt: Failed to register misc device
  215. [    2.734191] twl4030_wdt: probe of twl4030_wdt failed with error -16
  216. [    2.747650] usbcore: registered new interface driver usbhid
  217. [    2.753570] usbhid: USB HID core driver
  218. [    2.759674] ALSA device list:
  219. [    2.762786]   No soundcards found.
  220. [    2.766418] oprofile: hardware counters not available
  221. [    2.771728] oprofile: using timer interrupt.
  222. [    2.776550] TCP cubic registered
  223. [    2.779968] Initializing XFRM netlink socket
  224. [    2.784515] NET: Registered protocol family 17
  225. [    2.789245] NET: Registered protocol family 15
  226. [    2.794158] lib80211: common routines for IEEE802.11 drivers
  227. [    2.800170] Registering the dns_resolver key type
  228. [    2.805419] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  229. [    2.813903] ThumbEE CPU extension supported.
  230. [    2.818389] Registering SWP/SWPB emulation handler
  231. [    2.824157] mmc0: host does not support reading read-only switch. assuming write-enable.
  232. [    2.828643] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu
  233. [    2.828674] omap2_set_init_voltage: Unable to put vdd_mpu to its init voltage
  234. [    2.828674]
  235. [    2.849365] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
  236. [    2.856658] omap2_set_init_voltage: Unable to put vdd_iva to its init voltage
  237. [    2.856689]
  238. [    2.865753] Power Management for TI OMAP4.
  239. [    2.887054] clock: disabling unused clocks to save power
  240. [    2.893981] mmc0: new SD card at address b368
  241. [    2.899749] omapfb omapfb: no displays
  242. [    2.901000] mmcblk0: mmc0:b368 SD032 29.1 MiB
  243. [    2.904968]  mmcblk0: p1 p2
  244. [    2.911346] omapfb omapfb: failed to setup omapfb
  245. [    2.916320] omapfb: probe of omapfb failed with error -22
  246. [    2.922576] regulator_init_complete: VAUX3_6030: incomplete constraints, leaving on
  247. [    2.930847] regulator_init_complete: VAUX2_6030: incomplete constraints, leaving on
  248. [    2.939117] regulator_init_complete: VPP: incomplete constraints, leaving on
  249. [    2.947540] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  250. [    2.958831] usb 1-1: new high speed USB device using ehci-omap and address 2
  251. [    2.968231] EXT2-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
  252. [    2.990509] VFS: Mounted root (ext2 filesystem) on device 179:2.
  253. [    2.999633] devtmpfs: mounted
  254. [    3.002868] Freeing init memory: 240K
  255. [    3.124328] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  256. [    3.131408] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  257. [    3.140899] hub 1-1:1.0: USB hub found
  258. [    3.145019] hub 1-1:1.0: 5 ports detected
  259. [    3.443847] usb 1-1.1: new high speed USB device using ehci-omap and address 3
  260. [    3.569061] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  261. [    3.576324] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  262. [    3.589294] smsc95xx v1.0.4
  263. Initializing random number generator... done.
  264. Starting network...
  265. [    3.678222] smsc95xx 1-1.1:1.0: usb0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 2e:22:05:0d:e0:ce
  266. Starting dropbear sshd: [    3.779693] usb 1-1.2: new full speed USB device using ehci-omap and address 4
  267. OK
  268. [    3.944061] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=1003
  269. [    3.951324] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  270. [    3.959014] usb 1-1.2: Product: Hub in Apple Extended USB Keyboard
  271. [    3.965728] usb 1-1.2: Manufacturer: Mitsumi Electric
  272. [    3.973327] hub 1-1.2:1.0: USB hub found
  273. [    3.978057] hub 1-1.2:1.0: 3 ports detected
  274. [    4.310913] usb 1-1.2.3: new full speed USB device using ehci-omap and address 5
  275. [    4.491699] usb 1-1.2.3: New USB device found, idVendor=05ac, idProduct=020b
  276. [    4.499145] usb 1-1.2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
  277. [    4.507080] usb 1-1.2.3: Product: Apple Extended USB Keyboard
  278. [    4.513122] usb 1-1.2.3: Manufacturer: Mitsumi Electric
  279. [    4.569610] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/platform/ehci-omap.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/input/input1
  280. [    4.585235] generic-usb 0003:05AC:020B.0001: input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-ehci-omap.0-1.2.3/input0
  281. [    4.607360] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/platform/ehci-omap.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/input/input2
  282. [    4.622100] generic-usb 0003:05AC:020B.0002: input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-ehci-omap.0-1.2.3/input1
  283.  
  284. Welcome to Panda SDR
  285. Panda-SDR login: root
  286. Password: