API tools faq
paste
Advertisement
tthtlc

Technexion Blizzard Tablet development pack

tthtlc
Jun 1st, 2012
1,181
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.63 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Texas Instruments X-Loader 1.5.1 (Jan 30 2012 - 15:04:21)
  3. TDM-3730
  4. Loading u-boot.bin from nand
  5.  
  6.  
  7. U-Boot 2011.09-00251-g245cd3c-dirty (Jan 30 2012 - 15:04:28)
  8.  
  9. OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  10. OMAP3 TDM-3730 board + LPDDR/NAND
  11. I2C: ready
  12. DRAM: 512 MiB
  13. De-xz from 80051430 to 9cf37008 [ hw says fb @ 9cf37008 ]
  14. ret = 1536000
  15. NAND: 512 MiB
  16. MMC: OMAP SD/MMC: 0
  17. *** Warning - bad CRC, using default environment
  18.  
  19. In: serial
  20. Out: serial
  21. Err: serial
  22. Die ID #7ba600029e3800000163810d0402a012
  23. Net: smc911x-0
  24. Warning: failed to set MAC address
  25.  
  26. Hit any key to stop autoboot: 0
  27. Card did not respond to voltage select!
  28. Booting from nand ...
  29.  
  30. NAND read: device 0 offset 0x280000, size 0x400000
  31. 4194304 bytes read: OK
  32. ## Booting kernel from Legacy Image at 82000000 ...
  33. Image Name: Linux-2.6.37
  34. Image Type: ARM Linux Kernel Image (uncompressed)
  35. Data Size: 2520856 Bytes = 2.4 MiB
  36. Load Address: 80008000
  37. Entry Point: 80008000
  38. Verifying Checksum ... OK
  39. Loading Kernel Image ... OK
  40. OK
  41.  
  42. Starting kernel ...
  43.  
  44. Uncompressing Linux... done, booting the kernel.
  45. [ 0.000000] Linux version 2.6.37 (tapani@build-2) (gcc version 4.4.3 (GCC) )2
  46. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  47. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  48. [ 0.000000] Machine: TDM3730
  49. [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
  50. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  51. [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  52. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  53. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa4
  54. [ 0.000000] Kernel command line: console=ttyO0,115200n8 androidboot.console=s
  55. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  56. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  57. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  58. [ 0.000000] Memory: 76MB 372MB = 448MB total
  59. [ 0.000000] Memory: 448736k/448736k available, 22304k reserved, 0K highmem
  60. [ 0.000000] Virtual kernel memory layout:
  61. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  62. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  63. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  64. [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  65. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  66. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  67. [ 0.000000] .init : 0xc0008000 - 0xc002e000 ( 152 kB)
  68. [ 0.000000] .text : 0xc002e000 - 0xc04ef000 (4868 kB)
  69. [ 0.000000] .data : 0xc04f0000 - 0xc052cb20 ( 243 kB)
  70. [ 0.000000] NR_IRQS:409
  71. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  72. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  73. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrups
  74. [ 0.000000] Total of 96 interrupts on 1 active controller
  75. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  76. [ 0.000000] Console: colour dummy device 80x30
  77. [ 0.000000] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
  78. [ 0.000000] pid_max: default: 32768 minimum: 301
  79. [ 0.000000] Mount-cache hash table entries: 512
  80. [ 0.000000] CPU: Testing write buffer coherency: ok
  81. [ 0.000000] regulator: core version 0.5
  82. [ 0.000000] regulator: dummy:
  83. [ 0.000000] NET: Registered protocol family 16
  84. [ 0.000000] OMAP GPIO hardware version 2.5
  85. [ 0.000000] OMAP GPIO hardware version 2.5
  86. [ 0.000000] OMAP GPIO hardware version 2.5
  87. [ 0.000000] OMAP GPIO hardware version 2.5
  88. [ 0.000000] OMAP GPIO hardware version 2.5
  89. [ 0.000000] OMAP GPIO hardware version 2.5
  90. [ 0.000000] GPMC revision 5.0
  91. [ 0.000000] Trying to install interrupt handler for IRQ402
  92. [ 0.000000] Trying to install interrupt handler for IRQ403
  93. [ 0.000000] Trying to install interrupt handler for IRQ404
  94. [ 0.000000] Trying to install interrupt handler for IRQ405
  95. [ 0.000000] Trying to install interrupt handler for IRQ406
  96. [ 0.000000] Trying to install interrupt handler for IRQ407
  97. [ 0.000000] Trying to install interrupt handler for IRQ408
  98. [ 0.000000] Trying to install type control for IRQ409
  99. [ 0.000000] Trying to set irq flags for IRQ409
  100. [ 0.000000] omap_mux_init: Add partition: #1: core, flags: 0
  101. [ 0.000000] Could not look up dss_core
  102. [ 0.000000] hw-breakpoint: debug architecture 0x4 unsupported.
  103. [ 0.000000] ------------[ cut here ]------------
  104. [ 0.000000] WARNING: at arch/arm/mach-omap2/clock.c:438 omap2_clk_switch_mpu)
  105. [ 0.000000] clock: dpll1_ck: unable to set MPU rate to 1000: -22
  106. [ 0.000000] Modules linked in:
  107. [ 0.000000] Backtrace:
  108. [ 0.000000] [<c003db28>] (dump_backtrace+0x0/0x110) from [<c039adb4>] (dump_)
  109. [ 0.000000] r7:00000009 r6:000001b6 r5:c001027c r4:dec2bf38
  110. [ 0.000000] [<c039ad9c>] (dump_stack+0x0/0x1c) from [<c0061878>] (warn_slowp)
  111. [ 0.000000] [<c0061824>] (warn_slowpath_common+0x0/0x6c) from [<c0061934>] ()
  112. [ 0.000000] r9:00000000 r8:00000000 r7:00000000 r6:c04821fb r5:c002aa40
  113. [ 0.000000] r4:c04f9a30
  114. [ 0.000000] [<c00618fc>] (warn_slowpath_fmt+0x0/0x40) from [<c001027c>] (oma)
  115. [ 0.000000] r3:c04821fb r2:c04855c0
  116. [ 0.000000] [<c00101f4>] (omap2_clk_switch_mpurate_at_boot+0x0/0xbc) from [<)
  117. [ 0.000000] r6:c0064a88 r5:c00102b0 r4:c00264c0
  118. [ 0.000000] [<c00102b0>] (omap3xxx_clk_arch_init+0x0/0x44) from [<c002e3e0>])
  119. [ 0.000000] r5:c00102b0 r4:c00264c0
  120. [ 0.000000] [<c002e308>] (do_one_initcall+0x0/0x1ac) from [<c0008448>] (kern)
  121. [ 0.000000] [<c00083a8>] (kernel_init+0x0/0x154) from [<c0064a88>] (do_exit+)
  122. [ 0.000000] r5:c00083a8 r4:00000000
  123. [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
  124. [ 0.000000] OMAP DMA hardware revision 5.0
  125. [ 0.022949] bio: create slab <bio-0> at 0
  126. [ 0.024108] regulator: vmmc: 3300 mV normal
  127. [ 0.025787] SCSI subsystem initialized
  128. [ 0.028564] usbcore: registered new interface driver usbfs
  129. [ 0.028808] usbcore: registered new interface driver hub
  130. [ 0.029052] usbcore: registered new device driver usb
  131. [ 0.030334] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
  132. [ 0.033203] twl4030: PIH (irq 7) chaining IRQs 368..375
  133. [ 0.033233] twl4030: power (irq 373) chaining IRQs 376..383
  134. [ 0.033752] twl4030: gpio (irq 368) chaining IRQs 384..401
  135. [ 0.036773] regulator: VUSB1V5: 1500 mV normal standby
  136. [ 0.037414] regulator: VUSB1V8: 1800 mV normal standby
  137. [ 0.037994] regulator: VUSB3V1: 3100 mV normal standby
  138. [ 0.041381] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  139. [ 0.042694] regulator: VPLL1: 1000 <--> 1800 mV at 1800 mV normal standby
  140. [ 0.044494] regulator: VIO: 1800 mV normal standby
  141. [ 0.045166] regulator: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
  142. [ 0.045837] regulator: VDAC: 1800 mV normal standby
  143. [ 0.046478] regulator: VAUX2_4030: 2800 mV normal standby
  144. [ 0.047058] regulator: VPLL2: 1800 mV normal standby
  145. [ 0.047332] twl_reg twl_reg.5: can't register VPLL2, -16
  146. [ 0.047363] twl_reg: probe of twl_reg.5 failed with error -16
  147. [ 0.047912] machine_constraints_voltage: unsupportable 'VMMC2' voltage consts
  148. [ 0.048095] twl_reg twl_reg.7: can't register VMMC2, -22
  149. [ 0.048126] twl_reg: probe of twl_reg.7 failed with error -22
  150. [ 0.048706] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  151. [ 0.049011] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
  152. [ 0.049285] i2c i2c-2: Invalid 7-bit I2C address 0x00
  153. [ 0.049316] i2c i2c-2: Can't create device at 0x00
  154. [ 0.064422] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
  155. [ 0.065155] i2c i2c-3: Invalid 7-bit I2C address 0x00
  156. [ 0.065185] i2c i2c-3: Can't create device at 0x00
  157. [ 0.066375] Advanced Linux Sound Architecture Driver Version 1.0.23.
  158. [ 0.067779] cfg80211: Calling CRDA to update world regulatory domain
  159. [ 0.068084] Switching to clocksource 32k_counter
  160. [ 0.087493] musb-hdrc: version 6.0, otg (peripheral+host), debug=0
  161. [ 0.087646] musb-hdrc musb-hdrc.0: dma type: dma-inventra
  162. [ 0.087951] musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 using2
  163. [ 0.088623] NET: Registered protocol family 2
  164. [ 0.088836] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  165. [ 0.089294] TCP established hash table entries: 16384 (order: 5, 131072 byte)
  166. [ 0.089721] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  167. [ 0.089935] TCP: Hash tables configured (established 16384 bind 16384)
  168. [ 0.089965] TCP reno registered
  169. [ 0.089965] UDP hash table entries: 256 (order: 0, 4096 bytes)
  170. [ 0.089996] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  171. [ 0.090209] NET: Registered protocol family 1
  172. [ 0.090301] NetWinder Floating Point Emulator V0.97 (double precision)
  173. [ 0.091918] omap-iommu omap-iommu.0: isp registered
  174. [ 0.107055] ashmem: initialized
  175. [ 0.108428] msgmni has been set to 876
  176. [ 0.108978] io scheduler noop registered
  177. [ 0.109008] io scheduler deadline registered
  178. [ 0.109100] io scheduler cfq registered (default)
  179. [ 0.110412] Generic Backlight Driver Initialized.
  180. [ 0.111236] OMAP DSS rev 2.0
  181. [ 0.111328] OMAP DISPC rev 3.0
  182. [ 0.111358] OMAP VENC rev 2
  183. [ 0.111694] OMAP DSI rev 1.0
  184. [ 0.112640] OMAPDSS : 0x0 -- pixel clock @ 0
  185. [ 0.275177] sil9022 3-0039: <sil9022_set_cm_clkout_ctrl> sil9022 HDMI Chip v
  186. [ 0.275299] OMAPDSS : 0x0 -- pixel clock @ 0
  187. [ 0.275695] OMAPDSS : 0x0 -- pixel clock @ 0
  188. [ 0.436828] [drm] Initialized drm 1.1.0 20060810
  189. [ 0.436859] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  190. [ 0.438751] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  191. [ 1.287658] console [ttyO0] enabled
  192. [ 1.291717] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  193. [ 1.299468] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  194. [ 1.307220] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  195. [ 1.317443] omap2-nand driver initializing
  196. [ 1.322113] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 5)
  197. [ 1.331390] cmdlinepart partition parsing not available
  198. [ 1.336914] Creating 5 MTD partitions on "omap2-nand.0":
  199. [ 1.342498] 0x000000000000-0x000000080000 : "X-Loader"
  200. [ 1.349670] 0x000000080000-0x000000260000 : "U-Boot"
  201. [ 1.357086] 0x000000260000-0x000000280000 : "U-Boot Env"
  202. [ 1.364166] 0x000000280000-0x000000680000 : "Kernel"
  203. [ 1.372467] 0x000000680000-0x000020000000 : "File System"
  204. [ 1.590484] UBI: attaching mtd4 to ubi0
  205. [ 1.594573] UBI: physical eraseblock size: 131072 bytes (128 KiB)
  206. [ 1.601165] UBI: logical eraseblock size: 129024 bytes
  207. [ 1.606811] UBI: smallest flash I/O unit: 2048
  208. [ 1.611755] UBI: sub-page size: 512
  209. [ 1.616607] UBI: VID header offset: 512 (aligned 512)
  210. [ 1.622711] UBI: data offset: 2048
  211. [ 3.118957] UBI: max. sequence number: 1564
  212. [ 3.139801] UBI: attached mtd4 to ubi0
  213. [ 3.143737] UBI: MTD device name: "File System"
  214. [ 3.149505] UBI: MTD device size: 505 MiB
  215. [ 3.154724] UBI: number of good PEBs: 4044
  216. [ 3.159637] UBI: number of bad PEBs: 0
  217. [ 3.164337] UBI: number of corrupted PEBs: 0
  218. [ 3.168975] UBI: max. allowed volumes: 128
  219. [ 3.173828] UBI: wear-leveling threshold: 4096
  220. [ 3.178771] UBI: number of internal volumes: 1
  221. [ 3.183441] UBI: number of user volumes: 1
  222. [ 3.188110] UBI: available PEBs: 0
  223. [ 3.192749] UBI: total number of reserved PEBs: 4044
  224. [ 3.197967] UBI: number of PEBs reserved for bad PEB handling: 40
  225. [ 3.204376] UBI: max/mean erase counter: 2/1
  226. [ 3.208862] UBI: image sequence number: 0
  227. [ 3.213134] UBI: background thread "ubi_bgt0d" started, PID 499
  228. [ 3.219482] smsc911x: Driver version 2008-10-21.
  229. [ 3.225952] smsc911x-mdio: probed
  230. [ 3.229492] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffff)
  231. [ 3.238403] net eth0: MAC Address: 00:1f:7b:20:00:cc
  232. [ 3.244049] usbcore: registered new interface driver asix
  233. [ 3.249938] usbcore: registered new interface driver cdc_ether
  234. [ 3.256286] usbcore: registered new interface driver net1080
  235. [ 3.262420] usbcore: registered new interface driver cdc_subset
  236. [ 3.268798] usbcore: registered new interface driver zaurus
  237. [ 3.274688] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  238. [ 3.302612] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  239. [ 3.308624] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb1
  240. [ 3.316528] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  241. [ 3.333923] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  242. [ 3.340026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  243. [ 3.347167] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
  244. [ 3.354736] usb usb1: Product: OMAP-EHCI Host Controller
  245. [ 3.360321] usb usb1: Manufacturer: Linux 2.6.37 ehci_hcd
  246. [ 3.365997] usb usb1: SerialNumber: ehci-omap.0
  247. [ 3.371673] hub 1-0:1.0: USB hub found
  248. [ 3.375701] hub 1-0:1.0: 3 ports detected
  249. [ 3.404388] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  250. [ 3.411346] usbcore: registered new interface driver uas
  251. [ 3.416931] Initializing USB Mass Storage driver...
  252. [ 3.422363] usbcore: registered new interface driver usb-storage
  253. [ 3.428680] USB Mass Storage support registered.
  254. [ 3.433990] usbcore: registered new interface driver usbserial
  255. [ 3.440307] USB Serial support registered for generic
  256. [ 3.445861] usbcore: registered new interface driver usbserial_generic
  257. [ 3.452728] usbserial: USB Serial Driver core
  258. [ 3.457458] USB Serial support registered for GSM modem (1-port)
  259. [ 3.464050] usbcore: registered new interface driver option
  260. [ 3.469909] option: v0.7.2:USB Driver for GSM modems
  261. [ 3.475128] android init
  262. [ 3.477935] android_probe pdata: c0500924
  263. [ 3.482360] android_bind
  264. [ 3.485687] android_usb gadget: android_usb ready
  265. [ 3.490661] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
  266. [ 3.496307] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus numb2
  267. [ 3.504150] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  268. [ 3.511322] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
  269. [ 3.518890] usb usb2: Product: MUSB HDRC host driver
  270. [ 3.524108] usb usb2: Manufacturer: Linux 2.6.37 musb-hcd
  271. [ 3.529785] usb usb2: SerialNumber: musb-hdrc.0
  272. [ 3.535369] hub 2-0:1.0: USB hub found
  273. [ 3.539398] hub 2-0:1.0: 1 port detected
  274. [ 3.543975] f_acm init
  275. [ 3.546752] android_register_function acm
  276. [ 3.550933] f_adb init
  277. [ 3.553436] android_register_function adb
  278. [ 3.557647] adb_bind_config
  279. [ 3.561401] f_mass_storage init
  280. [ 3.564941] android_register_function usb_mass_storage
  281. [ 3.570373] f_mtp init
  282. [ 3.572814] android_register_function mtp
  283. [ 3.577453] mice: PS/2 mouse device common for all mice
  284. [ 3.583557] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  285. [ 3.592163] ads7846 spi1.0: touchscreen, irq 296
  286. [ 3.597534] input: ADS7846 Touchscreen as /devices/platform/omap2_mcspi.1/sp1
  287. [ 3.608306] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i22
  288. [ 3.622528] using rtc device, ds1337, for alarms
  289. [ 3.627319] rtc-ds1307 3-0068: rtc core: registered ds1337 as rtc0
  290. [ 3.634185] i2c /dev entries driver
  291. [ 3.639221] Linux media interface: v0.10
  292. [ 3.643676] Linux video capture interface: v2.00
  293. [ 3.649871] cpuidle: using governor ladder
  294. [ 3.654205] cpuidle: using governor menu
  295. [ 3.659393] mmci-omap-hs.0 supply vmmc_aux not found, using dummy regulator
  296. [ 3.670349] leds-gpio: probe of leds-gpio failed with error -22
  297. [ 3.677734] usbcore: registered new interface driver usbhid
  298. [ 3.683563] usbhid: USB HID core driver
  299. [ 3.688262] logger: created 64K log 'log_main'
  300. [ 3.693481] logger: created 256K log 'log_events'
  301. [ 3.698608] logger: created 64K log 'log_radio'
  302. [ 3.703430] usb 1-2: new high speed USB device using ehci-omap and address 2
  303. [ 3.711120] logger: created 64K log 'log_system'
  304. [ 3.721527] OMAP3 TAO/TDM SoC Sound init
  305. [ 3.810974] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  306. [ 3.821685] ALSA device list:
  307. [ 3.824798] #0: omap3taotdm
  308. [ 3.828155] TCP cubic registered
  309. [ 3.831573] NET: Registered protocol family 17
  310. [ 3.836364] NET: Registered protocol family 15
  311. [ 3.841033] lib80211: common routines for IEEE802.11 drivers
  312. [ 3.847045] VFP support v0.3: implementor 41 architecture 3 part 30 variant 3
  313. [ 3.855499] ThumbEE CPU extension supported.
  314. [ 3.862121] Power Management for TI OMAP3.
  315. [ 3.868133] sr_init: No PMIC hook to init smartreflex
  316. [ 3.873809] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver inid
  317. [ 3.882019] smartreflex: probe of smartreflex.0 failed with error -22
  318. [ 3.888885] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver inid
  319. [ 3.897094] smartreflex: probe of smartreflex.1 failed with error -22
  320. [ 3.904266] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
  321. [ 3.911315] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  322. [ 3.918823] usb 1-2: Product: USB2.0 Hub
  323. [ 3.923034] sr_init: platform driver register failed for SR
  324. [ 3.928894] SmartReflex Class3 initialized
  325. [ 3.933197] clock: disabling unused clocks to save power
  326. [ 3.941406] hub 1-2:1.0: USB hub found
  327. [ 3.946746] reserving 4194304 bytes at 9cf37008 for fb 0
  328. [ 3.952392] hub 1-2:1.0: 4 ports detected
  329. [ 3.956756] Failed. Allocating 4194304 bytes for fb 0
  330. [ 3.980712] allocating 4194304 bytes for fb 1
  331. [ 3.985595] allocating 4194304 bytes for fb 2
  332. [ 4.058319] omapdss DPI: Could not find exact pixel clock. Requested 33260 kz
  333. [ 4.124359] regulator_init_complete: incomplete constraints, leaving VDAC on
  334. [ 4.132568] rtc-ds1307 3-0068: setting system clock to 2012-06-01 16:52:20 U)
  335. [ 4.141479] omap_vout omap_vout: probed for an unknown device
  336. [ 4.148498] android_usb gadget: high speed config #1: android
  337. [ 4.202392] UBIFS: recovery needed
  338. [ 5.429901] UBIFS: recovery completed
  339. [ 5.433746] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
  340. [ 5.440063] UBIFS: file system size: 514160640 bytes (502110 KiB, 490 MiB,)
  341. [ 5.448455] UBIFS: journal size: 25804800 bytes (25200 KiB, 24 MiB, 20)
  342. [ 5.456665] UBIFS: media format: w4/r0 (latest is w4/r0)
  343. [ 5.462768] UBIFS: default compressor: lzo
  344. [ 5.467071] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
  345. [ 5.474182] VFS: Mounted root (ubifs filesystem) on device 0:12.
  346. [ 5.480529] Freeing init memory: 152K
  347. [ 5.510101] init: /init.rc: 180: invalid command 'netcfg'
  348. [ 5.515808] init: /init.rc: 180: invalid command 'netcfg'
  349. [ 5.607666] init: cannot open '/initlogo.rle'
  350. [ 5.676696] init: cannot find '/system/etc/install-recovery.sh', disabling ''
  351. # [ 5.856597] warning: `dhcpcd' uses 32-bit capabilities (legacy support in )
  352. [ 5.959533] net eth0: SMSC911x/921x identified at 0xe0860000, IRQ: 161
  353. [ 6.025726] enabling adb
  354. [ 6.045379] adb_open
  355. [ 6.208557] libertas_s+-----------------------------+
  356. [ 6.213348] libertas_s| |
  357. [ 6.256835] adb_releas| Cannot open /dev/ttyUSB1! |
  358. [ 6.260009] adb_open | |
  359. [ 6.311767] mmc1: new +-----------------------------+
  360. [ 6.446319] android_usb gadget: high speed config #1: android
  361. [ 7.135742] libertas: e0:2a:82:72:4a:7d, fw 9.70.4p0, cap 0x00000303
  362. [ 7.153076] cfg80211: Calling CRDA for country: JP
  363. [ 7.159729] libertas: wlan0: Marvell WLAN 802.11 adapter
  364. [ 15.978057] er.ServerThread (1030): /proc/1016/oom_adj is deprecated, please.
  365. [ 382.894165] cfg80211: Calling CRDA for country: US
  366. [ 382.904754] cfg80211: Calling CRDA to update world regulatory domain
  367. [ 384.108642] cfg80211: Calling CRDA for country: US
  368. [ 384.124267] cfg80211: Calling CRDA to update world regulatory domain
  369. [ 386.885650] cfg80211: Calling CRDA for country: US
  370. [ 871.261688] init: sys_prop: mis-match msg size recieved: -1 expected: 128
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!