Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- coreboot-4.0-r6637-abexperiment Wed Jul 13 12:45:21 GMT 2011 starting...
- MSR GLCP_SYS_RSTPLL (4c000014) value is 0000059c:0000182e
- Configuring PLL.
- coreboot-4.0-r6637-abexperiment Wed Jul 13 12:45:21 GMT 2011 starting...
- MSR GLCP_SYS_RSTPLL (4c000014) value is 0000059c:07de002e
- PLL configured.
- Castle 2.0 BTM periodic sync period.
- Enable Quack for fewer re-RAS on the MC
- GLIU port active enable
- Set the Delay Control in GLCP
- spd_read_byte dev 50 addr 0d returns 08
- spd_read_byte dev 50 addr 05 returns 01
- spd_read_byte dev 51 returns 0xff
- Enable RSDC
- FPU imprecise exceptions bit
- Enable Suspend on HLT & PAUSE instructions
- Enable SUSP and allow TSC to run in Suspend
- Setup throttling delays to proper mode
- Done cpuRegInit
- Ram1.00
- Ram2.00
- * sdram_set_spd_register
- spd_read_byte dev 50 addr 15 returns ff
- * Check DIMM 0
- * Check DIMM 1
- spd_read_byte dev 51 returns 0xff
- * Check DDR MAX
- spd_read_byte dev 50 addr 09 returns 0a
- spd_read_byte dev 51 returns 0xff
- * AUTOSIZE DIMM 0
- * Check present
- spd_read_byte dev 50 addr 02 returns 07
- * MODBANKS
- spd_read_byte dev 50 addr 05 returns 01
- * FIELDBANKS
- spd_read_byte dev 50 addr 11 returns 04
- * SPDNUMROWS
- spd_read_byte dev 50 addr 03 returns 03
- spd_read_byte dev 50 addr 04 returns 0a
- * SPDBANKDENSITY
- spd_read_byte dev 50 addr 1f returns 40
- * DIMMSIZE
- * BEFORT CTZ
- * TEST DIMM SIZE>8
- * PAGESIZE
- spd_read_byte dev 50 addr 04 returns 0a
- * MAXCOLADDR
- * >12address test
- * RDMSR CF07
- * WRMSR CF07
- * ALL DONE
- * AUTOSIZE DIMM 1
- * Check present
- spd_read_byte dev 51 returns 0xff
- * set cas latency
- spd_read_byte dev 50 addr 12 returns 10
- spd_read_byte dev 50 addr 17 returns 3c
- spd_read_byte dev 50 addr 19 returns 4b
- spd_read_byte dev 51 returns 0xff
- * set all latency
- spd_read_byte dev 50 addr 1e returns 28
- spd_read_byte dev 51 returns 0xff
- spd_read_byte dev 50 addr 1b returns 0f
- spd_read_byte dev 51 returns 0xff
- spd_read_byte dev 50 addr 1d returns 0f
- spd_read_byte dev 51 returns 0xff
- spd_read_byte dev 50 addr 1c returns 0a
- spd_read_byte dev 51 returns 0xff
- spd_read_byte dev 50 addr 2a returns 46
- spd_read_byte dev 51 returns 0xff
- * set emrs
- spd_read_byte dev 50 addr 16 returns ff
- spd_read_byte dev 51 returns 0xff
- * set ref rate
- spd_read_byte dev 50 addr 0c returns 3a
- spd_read_byte dev 51 returns 0xff
- Ram3
- * DRAM controller init done.
- RAM DLL lock
- Ram4
- POST 02
- Past wbinvd
- Loading image.
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- Stage: loading fallback/coreboot_ram @ 0x100000 (114688 bytes), entry @ 0x100000
- Stage: done loading.
- Jumping to image.
- coreboot-4.0-r6637-abexperiment Wed Jul 13 12:45:21 GMT 2011 booting...
- clocks_per_usec: 499
- Enumerating buses...
- Show all devs...Before device enumeration.
- Root Device: enabled 1
- PCI_DOMAIN: 0000: enabled 1
- PCI: 00:01.0: enabled 1
- PCI: 00:01.1: enabled 1
- PCI: 00:0f.0: enabled 1
- PCI: 00:0f.1: enabled 1
- PCI: 00:0f.2: enabled 1
- PCI: 00:0f.4: enabled 1
- PCI: 00:0f.5: enabled 1
- APIC_CLUSTER: 0: enabled 1
- APIC: 00: enabled 1
- Compare with tree...
- Root Device: enabled 1
- PCI_DOMAIN: 0000: enabled 1
- PCI: 00:01.0: enabled 1
- PCI: 00:01.1: enabled 1
- PCI: 00:0f.0: enabled 1
- PCI: 00:0f.1: enabled 1
- PCI: 00:0f.2: enabled 1
- PCI: 00:0f.4: enabled 1
- PCI: 00:0f.5: enabled 1
- APIC_CLUSTER: 0: enabled 1
- APIC: 00: enabled 1
- scan_static_bus for Root Device
- >> Entering northbridge.c: enable_dev with path 6
- >> Entering northbridge.c: pci_domain_enable
- Enter northbridge_init_early
- writeglmsr: MSR 0x10000020, val 0x20000000:0x000fff80
- writeglmsr: MSR 0x10000021, val 0x20000000:0x080fffe0
- sizeram: _MSR MC_CF07_DATA: 10076013:00061a40
- sizeram: sizem 0x100MB
- SysmemInit: enable for 256MBytes
- usable RAM: 268304383 bytes
- SysmemInit: MSR 0x10000028, val 0x2000000f:0xfdf00100
- sizeram: _MSR MC_CF07_DATA: 10076013:00061a40
- sizeram: sizem 0x100MB
- SMMGL0Init: 268304384 bytes
- SMMGL0Init: offset is 0x80400000
- SMMGL0Init: MSR 0x10000026, val 0x28fbe080:0x400fffe0
- writeglmsr: MSR 0x10000080, val 0x00000000:0x00000003
- writeglmsr: MSR 0x40000020, val 0x20000000:0x000fff80
- writeglmsr: MSR 0x40000021, val 0x20000000:0x080fffe0
- sizeram: _MSR MC_CF07_DATA: 10076013:00061a40
- sizeram: sizem 0x100MB
- SysmemInit: enable for 256MBytes
- usable RAM: 268304383 bytes
- SysmemInit: MSR 0x4000002a, val 0x2000000f:0xfdf00100
- SMMGL1Init:
- SMMGL1Init: MSR 0x40000023, val 0x20000080:0x400fffe0
- writeglmsr: MSR 0x40000080, val 0x00000000:0x00000001
- writeglmsr: MSR 0x400000e3, val 0x60000000:0x033000f0
- CPU_RCONF_DEFAULT (1808): 0x25FFFC02:0x10FFDF00
- CPU_RCONF_BYPASS (180A): 0x00000000 : 0x00000000
- L2 cache enabled
- Enabling cache
- GLPCI R1: system msr.lo 0x00100130 msr.hi 0x0ffdf000
- GLPCI R2: system msr.lo 0x80400120 msr.hi 0x8041f000
- Exit northbridge_init_early
- Done cpubug fixes
- Not Doing ChipsetFlashSetup()
- Preparing for VSA...
- VSA: Real mode stub @00000600: 606 bytes
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- CBFS: follow chain: fff88040 + 38 + 79a3 + align -> fff8fa40
- Check fallback/payload
- CBFS: follow chain: fff8fa40 + 38 + c1ae + align -> fff9bc40
- Check vsa
- Stage: loading vsa @ 0x60000 (57504 bytes), entry @ 0x60020
- Stage: done loading.
- VSA: Buffer @00060000 *[0k]=ba
- VSA: Signature *[0x20-0x23] is b0:10:e6:80
- Calling VSA module...
- ... VSA module returned.
- VSM: VSA2 VR signature verified.
- Graphics init...
- VRC_VG value: 0x2808
- Finding PCI configuration type.
- PCI: Using configuration type 1
- PCI_DOMAIN: 0000 enabled
- >> Entering northbridge.c: enable_dev with path 7
- APIC_CLUSTER: 0 enabled
- PCI_DOMAIN: 0000 scanning...
- PCI: pci_scan_bus for bus 00
- >> Entering northbridge.c: enable_dev with path 2
- PCI: 00:01.0 [1022/2080] ops
- PCI: 00:01.0 [1022/2080] enabled
- >> Entering northbridge.c: enable_dev with path 2
- PCI: 00:01.1 [1022/2081] enabled
- PCI: 00:01.2 [1022/2082] enabled
- PCI: 00:09.0 [1106/3053] enabled
- cs5536: southbridge_enable: dev is 0010e910
- PCI: 00:0f.0 [1022/2090] bus ops
- PCI: 00:0f.0 [1022/2090] enabled
- cs5536: southbridge_enable: dev is 0010e958
- PCI: Static device PCI: 00:0f.1 not found, disabling it.
- cs5536: southbridge_enable: dev is 0010e9a0
- PCI: 00:0f.2 [1022/209a] ops
- PCI: 00:0f.2 [1022/209a] enabled
- PCI: 00:0f.3 [1022/2093] enabled
- cs5536: southbridge_enable: dev is 0010e9e8
- PCI: 00:0f.4 [1022/2094] enabled
- cs5536: southbridge_enable: dev is 0010ea30
- PCI: 00:0f.5 [1022/2095] enabled
- PCI: 00:0f.6 [1022/2096] enabled
- PCI: 00:0f.7 [1022/2097] enabled
- scan_static_bus for PCI: 00:0f.0
- scan_static_bus for PCI: 00:0f.0 done
- PCI: pci_scan_bus returning with max=000
- scan_static_bus for Root Device done
- done
- Setting up VGA for PCI: 00:01.1
- Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
- Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
- Allocating resources...
- Reading resources...
- Root Device read_resources bus 0 link: 0
- PCI_DOMAIN: 0000 read_resources bus 0 link: 0
- PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
- APIC_CLUSTER: 0 read_resources bus 0 link: 0
- APIC: 00 missing read_resources
- APIC_CLUSTER: 0 read_resources bus 0 link: 0 done
- Root Device read_resources bus 0 link: 0 done
- Done reading resources.
- Show resources in subtree (Root Device)...After reading.
- Root Device child on link 0 PCI_DOMAIN: 0000
- PCI_DOMAIN: 0000 child on link 0 PCI: 00:01.0
- PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffff flags 40040100 index 10000000
- PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffffffff flags 40040200 index 100000
- PCI: 00:01.0
- PCI: 00:01.0 resource base 0 size 4 align 2 gran 2 limit ffff flags 100 index 10
- PCI: 00:01.1
- PCI: 00:01.1 resource base 0 size 1000000 align 24 gran 24 limit ffffffff flags 200 index 10
- PCI: 00:01.1 resource base 0 size 4000 align 14 gran 14 limit ffffffff flags 200 index 14
- PCI: 00:01.1 resource base 0 size 4000 align 14 gran 14 limit ffffffff flags 200 index 18
- PCI: 00:01.1 resource base 0 size 4000 align 14 gran 14 limit ffffffff flags 200 index 1c
- PCI: 00:01.1 resource base 0 size 4000 align 14 gran 14 limit ffffffff flags 200 index 20
- PCI: 00:01.2
- PCI: 00:01.2 resource base 0 size 4000 align 14 gran 14 limit ffffffff flags 200 index 10
- PCI: 00:09.0
- PCI: 00:09.0 resource base 0 size 100 align 8 gran 8 limit ffff flags 100 index 10
- PCI: 00:09.0 resource base 0 size 100 align 8 gran 8 limit ffffffff flags 200 index 14
- PCI: 00:0f.0
- PCI: 00:0f.0 resource base 0 size 8 align 3 gran 3 limit ffff flags 100 index 10
- PCI: 00:0f.0 resource base 0 size 100 align 8 gran 8 limit ffff flags 100 index 14
- PCI: 00:0f.0 resource base 0 size 40 align 6 gran 6 limit ffff flags 100 index 18
- PCI: 00:0f.0 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 1c
- PCI: 00:0f.0 resource base 0 size 80 align 7 gran 7 limit ffff flags 100 index 20
- PCI: 00:0f.0 resource base 0 size 40 align 6 gran 6 limit ffff flags 100 index 24
- PCI: 00:0f.0 resource base 0 size 1000 align 0 gran 0 limit ffff flags c0000100 index 1
- PCI: 00:0f.0 resource base fec00000 size 1000 align 0 gran 0 limit 0 flags c0000200 index 3
- PCI: 00:0f.1
- PCI: 00:0f.2
- PCI: 00:0f.2 resource base 0 size 10 align 4 gran 4 limit ffff flags 100 index 20
- PCI: 00:0f.3
- PCI: 00:0f.3 resource base 0 size 80 align 7 gran 7 limit ffff flags 100 index 10
- PCI: 00:0f.4
- PCI: 00:0f.4 resource base 0 size 1000 align 12 gran 12 limit ffffffff flags 200 index 10
- PCI: 00:0f.5
- PCI: 00:0f.5 resource base 0 size 1000 align 12 gran 12 limit ffffffff flags 200 index 10
- PCI: 00:0f.6
- PCI: 00:0f.6 resource base 0 size 2000 align 13 gran 13 limit ffffffff flags 200 index 10
- PCI: 00:0f.7
- PCI: 00:0f.7 resource base 0 size 1000 align 12 gran 12 limit ffffffff flags 200 index 10
- APIC_CLUSTER: 0 child on link 0 APIC: 00
- APIC: 00
- PCI_DOMAIN: 0000 compute_resources_io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
- PCI: 00:09.0 10 * [0x0 - 0xff] io
- PCI: 00:0f.0 14 * [0x400 - 0x4ff] io
- PCI: 00:0f.0 20 * [0x800 - 0x87f] io
- PCI: 00:0f.3 10 * [0x880 - 0x8ff] io
- PCI: 00:0f.0 18 * [0xc00 - 0xc3f] io
- PCI: 00:0f.0 24 * [0xc40 - 0xc7f] io
- PCI: 00:0f.0 1c * [0xc80 - 0xc9f] io
- PCI: 00:0f.2 20 * [0xca0 - 0xcaf] io
- PCI: 00:0f.0 10 * [0xcb0 - 0xcb7] io
- PCI: 00:01.0 10 * [0xcb8 - 0xcbb] io
- PCI_DOMAIN: 0000 compute_resources_io: base: cbc size: cbc align: 8 gran: 0 limit: ffff done
- PCI_DOMAIN: 0000 compute_resources_mem: base: 0 size: 0 align: 0 gran: 0 limit: ffffffff
- PCI: 00:01.1 10 * [0x0 - 0xffffff] mem
- PCI: 00:01.1 14 * [0x1000000 - 0x1003fff] mem
- PCI: 00:01.1 18 * [0x1004000 - 0x1007fff] mem
- PCI: 00:01.1 1c * [0x1008000 - 0x100bfff] mem
- PCI: 00:01.1 20 * [0x100c000 - 0x100ffff] mem
- PCI: 00:01.2 10 * [0x1010000 - 0x1013fff] mem
- PCI: 00:0f.6 10 * [0x1014000 - 0x1015fff] mem
- PCI: 00:0f.4 10 * [0x1016000 - 0x1016fff] mem
- PCI: 00:0f.5 10 * [0x1017000 - 0x1017fff] mem
- PCI: 00:0f.7 10 * [0x1018000 - 0x1018fff] mem
- PCI: 00:09.0 14 * [0x1019000 - 0x10190ff] mem
- PCI_DOMAIN: 0000 compute_resources_mem: base: 1019100 size: 1019100 align: 24 gran: 0 limit: fffffe
- avoid_fixed_resources: PCI_DOMAIN: 0000
- avoid_fixed_resources:@PCI_DOMAIN: 0000 10000000 limit 0000ffff
- avoid_fixed_resources:@PCI_DOMAIN: 0000 10000100 limit ffffffff
- constrain_resources: PCI_DOMAIN: 0000
- constrain_resources: PCI: 00:01.0
- constrain_resources: PCI: 00:01.1
- constrain_resources: PCI: 00:01.2
- constrain_resources: PCI: 00:09.0
- constrain_resources: PCI: 00:0f.0
- constrain_resources: PCI: 00:0f.2
- constrain_resources: PCI: 00:0f.3
- constrain_resources: PCI: 00:0f.4
- constrain_resources: PCI: 00:0f.5
- constrain_resources: PCI: 00:0f.6
- constrain_resources: PCI: 00:0f.7
- avoid_fixed_resources2: PCI_DOMAIN: 0000@10000000 limit 0000ffff
- lim->base 00001000 lim->limit 0000ffff
- avoid_fixed_resources2: PCI_DOMAIN: 0000@10000100 limit ffffffff
- lim->base 00000000 lim->limit febfffff
- Setting resources...
- PCI_DOMAIN: 0000 allocate_resources_io: base:1000 size:cbc align:8 gran:0 limit:ffff
- Assigned: PCI: 00:09.0 10 * [0x1000 - 0x10ff] io
- Assigned: PCI: 00:0f.0 14 * [0x1400 - 0x14ff] io
- Assigned: PCI: 00:0f.0 20 * [0x1800 - 0x187f] io
- Assigned: PCI: 00:0f.3 10 * [0x1880 - 0x18ff] io
- Assigned: PCI: 00:0f.0 18 * [0x1c00 - 0x1c3f] io
- Assigned: PCI: 00:0f.0 24 * [0x1c40 - 0x1c7f] io
- Assigned: PCI: 00:0f.0 1c * [0x1c80 - 0x1c9f] io
- Assigned: PCI: 00:0f.2 20 * [0x1ca0 - 0x1caf] io
- Assigned: PCI: 00:0f.0 10 * [0x1cb0 - 0x1cb7] io
- Assigned: PCI: 00:01.0 10 * [0x1cb8 - 0x1cbb] io
- PCI_DOMAIN: 0000 allocate_resources_io: next_base: 1cbc size: cbc align: 8 gran: 0 done
- PCI_DOMAIN: 0000 allocate_resources_mem: base:fd000000 size:1019100 align:24 gran:0 limit:febfffff
- Assigned: PCI: 00:01.1 10 * [0xfd000000 - 0xfdffffff] mem
- Assigned: PCI: 00:01.1 14 * [0xfe000000 - 0xfe003fff] mem
- Assigned: PCI: 00:01.1 18 * [0xfe004000 - 0xfe007fff] mem
- Assigned: PCI: 00:01.1 1c * [0xfe008000 - 0xfe00bfff] mem
- Assigned: PCI: 00:01.1 20 * [0xfe00c000 - 0xfe00ffff] mem
- Assigned: PCI: 00:01.2 10 * [0xfe010000 - 0xfe013fff] mem
- Assigned: PCI: 00:0f.6 10 * [0xfe014000 - 0xfe015fff] mem
- Assigned: PCI: 00:0f.4 10 * [0xfe016000 - 0xfe016fff] mem
- Assigned: PCI: 00:0f.5 10 * [0xfe017000 - 0xfe017fff] mem
- Assigned: PCI: 00:0f.7 10 * [0xfe018000 - 0xfe018fff] mem
- Assigned: PCI: 00:09.0 14 * [0xfe019000 - 0xfe0190ff] mem
- PCI_DOMAIN: 0000 allocate_resources_mem: next_base: fe019100 size: 1019100 align: 24 gran: 0 done
- Root Device assign_resources, bus 0 link: 0
- >> Entering northbridge.c: pci_domain_set_resources
- PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
- PCI: 00:01.1 10 <- [0x00fd000000 - 0x00fdffffff] size 0x01000000 gran 0x18 mem
- PCI: 00:01.1 14 <- [0x00fe000000 - 0x00fe003fff] size 0x00004000 gran 0x0e mem
- PCI: 00:01.1 18 <- [0x00fe004000 - 0x00fe007fff] size 0x00004000 gran 0x0e mem
- PCI: 00:01.1 1c <- [0x00fe008000 - 0x00fe00bfff] size 0x00004000 gran 0x0e mem
- PCI: 00:01.1 20 <- [0x00fe00c000 - 0x00fe00ffff] size 0x00004000 gran 0x0e mem
- PCI: 00:01.2 10 <- [0x00fe010000 - 0x00fe013fff] size 0x00004000 gran 0x0e mem
- PCI: 00:09.0 10 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io
- PCI: 00:09.0 14 <- [0x00fe019000 - 0x00fe0190ff] size 0x00000100 gran 0x08 mem
- PCI: 00:0f.0 10 <- [0x0000001cb0 - 0x0000001cb7] size 0x00000008 gran 0x03 io
- PCI: 00:0f.0 14 <- [0x0000001400 - 0x00000014ff] size 0x00000100 gran 0x08 io
- PCI: 00:0f.0 18 <- [0x0000001c00 - 0x0000001c3f] size 0x00000040 gran 0x06 io
- PCI: 00:0f.0 1c <- [0x0000001c80 - 0x0000001c9f] size 0x00000020 gran 0x05 io
- PCI: 00:0f.0 20 <- [0x0000001800 - 0x000000187f] size 0x00000080 gran 0x07 io
- PCI: 00:0f.0 24 <- [0x0000001c40 - 0x0000001c7f] size 0x00000040 gran 0x06 io
- PCI: 00:0f.2 20 <- [0x0000001ca0 - 0x0000001caf] size 0x00000010 gran 0x04 io
- PCI: 00:0f.3 10 <- [0x0000001880 - 0x00000018ff] size 0x00000080 gran 0x07 io
- PCI: 00:0f.4 10 <- [0x00fe016000 - 0x00fe016fff] size 0x00001000 gran 0x0c mem
- PCI: 00:0f.5 10 <- [0x00fe017000 - 0x00fe017fff] size 0x00001000 gran 0x0c mem
- PCI: 00:0f.6 10 <- [0x00fe014000 - 0x00fe015fff] size 0x00002000 gran 0x0d mem
- PCI: 00:0f.7 10 <- [0x00fe018000 - 0x00fe018fff] size 0x00001000 gran 0x0c mem
- PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
- Root Device assign_resources, bus 0 link: 0
- Done setting resources.
- Show resources in subtree (Root Device)...After assigning values.
- Root Device child on link 0 PCI_DOMAIN: 0000
- PCI_DOMAIN: 0000 child on link 0 PCI: 00:01.0
- PCI_DOMAIN: 0000 resource base 1000 size cbc align 8 gran 0 limit ffff flags 40040100 index 10000
- PCI_DOMAIN: 0000 resource base fd000000 size 1019100 align 24 gran 0 limit febfffff flags 4004020
- PCI_DOMAIN: 0000 resource base 0 size a0000 align 0 gran 0 limit 0 flags e0004200 index a
- PCI_DOMAIN: 0000 resource base c0000 size f720000 align 0 gran 0 limit 0 flags e0004200 index b
- PCI: 00:01.0
- PCI: 00:01.0 resource base 1cb8 size 4 align 2 gran 2 limit ffff flags 40000100 index 10
- PCI: 00:01.1
- PCI: 00:01.1 resource base fd000000 size 1000000 align 24 gran 24 limit febfffff flags 600002000
- PCI: 00:01.1 resource base fe000000 size 4000 align 14 gran 14 limit febfffff flags 60000200 in4
- PCI: 00:01.1 resource base fe004000 size 4000 align 14 gran 14 limit febfffff flags 60000200 in8
- PCI: 00:01.1 resource base fe008000 size 4000 align 14 gran 14 limit febfffff flags 60000200 inc
- PCI: 00:01.1 resource base fe00c000 size 4000 align 14 gran 14 limit febfffff flags 60000200 in0
- PCI: 00:01.2
- PCI: 00:01.2 resource base fe010000 size 4000 align 14 gran 14 limit febfffff flags 60000200 in0
- PCI: 00:09.0
- PCI: 00:09.0 resource base 1000 size 100 align 8 gran 8 limit ffff flags 60000100 index 10
- PCI: 00:09.0 resource base fe019000 size 100 align 8 gran 8 limit febfffff flags 60000200 index4
- PCI: 00:0f.0
- PCI: 00:0f.0 resource base 1cb0 size 8 align 3 gran 3 limit ffff flags 60000100 index 10
- PCI: 00:0f.0 resource base 1400 size 100 align 8 gran 8 limit ffff flags 60000100 index 14
- PCI: 00:0f.0 resource base 1c00 size 40 align 6 gran 6 limit ffff flags 60000100 index 18
- PCI: 00:0f.0 resource base 1c80 size 20 align 5 gran 5 limit ffff flags 60000100 index 1c
- PCI: 00:0f.0 resource base 1800 size 80 align 7 gran 7 limit ffff flags 60000100 index 20
- PCI: 00:0f.0 resource base 1c40 size 40 align 6 gran 6 limit ffff flags 60000100 index 24
- PCI: 00:0f.0 resource base 0 size 1000 align 0 gran 0 limit ffff flags c0000100 index 1
- PCI: 00:0f.0 resource base fec00000 size 1000 align 0 gran 0 limit 0 flags c0000200 index 3
- PCI: 00:0f.1
- PCI: 00:0f.2
- PCI: 00:0f.2 resource base 1ca0 size 10 align 4 gran 4 limit ffff flags 60000100 index 20
- PCI: 00:0f.3
- PCI: 00:0f.3 resource base 1880 size 80 align 7 gran 7 limit ffff flags 60000100 index 10
- PCI: 00:0f.4
- PCI: 00:0f.4 resource base fe016000 size 1000 align 12 gran 12 limit febfffff flags 60000200 in0
- PCI: 00:0f.5
- PCI: 00:0f.5 resource base fe017000 size 1000 align 12 gran 12 limit febfffff flags 60000200 in0
- PCI: 00:0f.6
- PCI: 00:0f.6 resource base fe014000 size 2000 align 13 gran 13 limit febfffff flags 60000200 in0
- PCI: 00:0f.7
- PCI: 00:0f.7 resource base fe018000 size 1000 align 12 gran 12 limit febfffff flags 60000200 in0
- APIC_CLUSTER: 0 child on link 0 APIC: 00
- APIC: 00
- Done allocating resources.
- Enabling resources...
- PCI: 00:01.0 cmd <- 05
- PCI: 00:01.1 subsystem <- 0000/0000
- PCI: 00:01.1 cmd <- 03
- PCI: 00:01.2 cmd <- 02
- PCI: 00:09.0 cmd <- 83
- PCI: 00:0f.0 cmd <- 09
- PCI: 00:0f.2 cmd <- 01
- PCI: 00:0f.3 cmd <- 01
- PCI: 00:0f.4 subsystem <- 0000/0000
- PCI: 00:0f.4 cmd <- 02
- PCI: 00:0f.5 subsystem <- 0000/0000
- PCI: 00:0f.5 cmd <- 02
- PCI: 00:0f.6 cmd <- 02
- PCI: 00:0f.7 cmd <- 02
- done.
- Initializing devices...
- Root Device init
- ALIX.2D ENTER init
- ALIX.2D EXIT init
- APIC_CLUSTER: 0 init
- >> Entering northbridge.c: cpu_bus_init
- Initializing CPU #0
- CPU: vendor AMD device 5a2
- CPU: family 05, model 0a, stepping 02
- model_lx_init
- Enabling cache
- A20 (0x92): 2
- A20 (0x92): 2
- CPU model_lx_init DONE
- CPU #0 initialized
- PCI: 00:01.0 init
- >> Entering northbridge.c: northbridge_init
- PCI: 00:01.1 init
- PCI: 00:01.2 init
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- CBFS: follow chain: fff88040 + 38 + 79a3 + align -> fff8fa40
- Check fallback/payload
- CBFS: follow chain: fff8fa40 + 38 + c1ae + align -> fff9bc40
- Check vsa
- CBFS: follow chain: fff9bc40 + 28 + e0bc + align -> fffa9d40
- Check config
- CBFS: follow chain: fffa9d40 + 28 + a1f + align -> fffaa7c0
- Check
- CBFS: follow chain: fffaa7c0 + 28 + 457f8 + align -> ffff0000
- CBFS: Could not find file pci1022,2082.rom
- PCI: 00:09.0 init
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- CBFS: follow chain: fff88040 + 38 + 79a3 + align -> fff8fa40
- Check fallback/payload
- CBFS: follow chain: fff8fa40 + 38 + c1ae + align -> fff9bc40
- Check vsa
- CBFS: follow chain: fff9bc40 + 28 + e0bc + align -> fffa9d40
- Check config
- CBFS: follow chain: fffa9d40 + 28 + a1f + align -> fffaa7c0
- Check
- CBFS: follow chain: fffaa7c0 + 28 + 457f8 + align -> ffff0000
- CBFS: Could not find file pci1106,3053.rom
- PCI: 00:0f.0 init
- cs5536: southbridge_init
- RTC Init
- GPIO_ADDR: 00001400
- uarts_init: enable COM1
- uarts_init: enable COM2
- uarts_init: wrote COM2 address 0x2f8
- uarts_init: set COM2 irq
- uarts_init: set output enable
- uarts_init: set OUTAUX1
- uarts_init: set pullup COM2
- uarts_init: COM2 enabled
- cs5536: southbridge_init: enable_ide_nand_flash is 0
- Disabling VPCI device: 0x80000900
- Disabling VPCI device: 0x80007B00
- PCI: 00:0f.2 init
- cs5536_ide: ide_init
- PCI: 00:0f.3 init
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- CBFS: follow chain: fff88040 + 38 + 79a3 + align -> fff8fa40
- Check fallback/payload
- CBFS: follow chain: fff8fa40 + 38 + c1ae + align -> fff9bc40
- Check vsa
- CBFS: follow chain: fff9bc40 + 28 + e0bc + align -> fffa9d40
- Check config
- CBFS: follow chain: fffa9d40 + 28 + a1f + align -> fffaa7c0
- Check
- CBFS: follow chain: fffaa7c0 + 28 + 457f8 + align -> ffff0000
- CBFS: Could not find file pci1022,2093.rom
- PCI: 00:0f.4 init
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- CBFS: follow chain: fff88040 + 38 + 79a3 + align -> fff8fa40
- Check fallback/payload
- CBFS: follow chain: fff8fa40 + 38 + c1ae + align -> fff9bc40
- Check vsa
- CBFS: follow chain: fff9bc40 + 28 + e0bc + align -> fffa9d40
- Check config
- CBFS: follow chain: fffa9d40 + 28 + a1f + align -> fffaa7c0
- Check
- CBFS: follow chain: fffaa7c0 + 28 + 457f8 + align -> ffff0000
- CBFS: Could not find file pci1022,2094.rom
- PCI: 00:0f.5 init
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- CBFS: follow chain: fff88040 + 38 + 79a3 + align -> fff8fa40
- Check fallback/payload
- CBFS: follow chain: fff8fa40 + 38 + c1ae + align -> fff9bc40
- Check vsa
- CBFS: follow chain: fff9bc40 + 28 + e0bc + align -> fffa9d40
- Check config
- CBFS: follow chain: fffa9d40 + 28 + a1f + align -> fffaa7c0
- Check
- CBFS: follow chain: fffaa7c0 + 28 + 457f8 + align -> ffff0000
- CBFS: Could not find file pci1022,2095.rom
- PCI: 00:0f.6 init
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- CBFS: follow chain: fff88040 + 38 + 79a3 + align -> fff8fa40
- Check fallback/payload
- CBFS: follow chain: fff8fa40 + 38 + c1ae + align -> fff9bc40
- Check vsa
- CBFS: follow chain: fff9bc40 + 28 + e0bc + align -> fffa9d40
- Check config
- CBFS: follow chain: fffa9d40 + 28 + a1f + align -> fffaa7c0
- Check
- CBFS: follow chain: fffaa7c0 + 28 + 457f8 + align -> ffff0000
- CBFS: Could not find file pci1022,2096.rom
- PCI: 00:0f.7 init
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- CBFS: follow chain: fff88040 + 38 + 79a3 + align -> fff8fa40
- Check fallback/payload
- CBFS: follow chain: fff8fa40 + 38 + c1ae + align -> fff9bc40
- Check vsa
- CBFS: follow chain: fff9bc40 + 28 + e0bc + align -> fffa9d40
- Check config
- CBFS: follow chain: fffa9d40 + 28 + a1f + align -> fffaa7c0
- Check
- CBFS: follow chain: fffaa7c0 + 28 + 457f8 + align -> ffff0000
- CBFS: Could not find file pci1022,2097.rom
- Devices initialized
- Show all devs...After init.
- Root Device: enabled 1
- PCI_DOMAIN: 0000: enabled 1
- PCI: 00:01.0: enabled 1
- PCI: 00:01.1: enabled 1
- PCI: 00:0f.0: enabled 1
- PCI: 00:0f.1: enabled 0
- PCI: 00:0f.2: enabled 1
- PCI: 00:0f.4: enabled 1
- PCI: 00:0f.5: enabled 1
- APIC_CLUSTER: 0: enabled 1
- APIC: 00: enabled 1
- PCI: 00:01.2: enabled 1
- PCI: 00:09.0: enabled 1
- PCI: 00:0f.3: enabled 1
- PCI: 00:0f.6: enabled 1
- PCI: 00:0f.7: enabled 1
- CPU: 00: enabled 1
- Initializing CBMEM area to 0xf7d0000 (65536 bytes)
- Adding CBMEM entry as no. 1
- Moving GDT to 0f7d0200...ok
- High Tables Base is f7d0000.
- Copying Interrupt Routing Table to 0x000f0000... done.
- PIRQ Entry 0 Dev/Fn: 1 Slot: 0
- INT: A link: 1 bitmap: 800 IRQ: 11
- INT: B link: 0 bitmap: 0 not routed
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- Assigning IRQ 11 to 0:1.2
- i8259_configure_irq_trigger: current interrupts are 0x0
- i8259_configure_irq_trigger: try to set interrupts 0x800
- PIRQ Entry 1 Dev/Fn: 9 Slot: 0
- INT: A link: 2 bitmap: 400 IRQ: 10
- INT: B link: 0 bitmap: 0 not routed
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- Assigning IRQ 10 to 0:9.0
- i8259_configure_irq_trigger: current interrupts are 0x800
- i8259_configure_irq_trigger: try to set interrupts 0xc00
- PIRQ Entry 2 Dev/Fn: A Slot: 0
- INT: A link: 3 bitmap: 800 IRQ: 11
- INT: B link: 0 bitmap: 0 not routed
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- PIRQ Entry 3 Dev/Fn: B Slot: 0
- INT: A link: 4 bitmap: 200 IRQ: 9
- INT: B link: 0 bitmap: 0 not routed
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- PIRQ Entry 4 Dev/Fn: C Slot: 0
- INT: A link: 1 bitmap: 800 IRQ: 11
- INT: B link: 2 bitmap: 400 IRQ: 10
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- PIRQ Entry 5 Dev/Fn: E Slot: 0
- INT: A link: 3 bitmap: 800 IRQ: 11
- INT: B link: 4 bitmap: 200 IRQ: 9
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- PIRQ Entry 6 Dev/Fn: F Slot: 0
- INT: A link: 1 bitmap: 800 IRQ: 11
- INT: B link: 2 bitmap: 400 IRQ: 10
- INT: C link: 3 bitmap: 800 IRQ: 11
- INT: D link: 4 bitmap: 200 IRQ: 9
- Assigning IRQ 9 to 0:f.4
- i8259_configure_irq_trigger: current interrupts are 0xc00
- i8259_configure_irq_trigger: try to set interrupts 0xe00
- Assigning IRQ 9 to 0:f.5
- i8259_configure_irq_trigger: current interrupts are 0xe00
- i8259_configure_irq_trigger: try to set interrupts 0xe00
- PIRQ1: 11
- PIRQ2: 10
- PIRQ3: 11
- PIRQ4: 9
- Adding CBMEM entry as no. 2
- Copying Interrupt Routing Table to 0x0f7d0400... done.
- PIRQ Entry 0 Dev/Fn: 1 Slot: 0
- INT: A link: 1 bitmap: 800 IRQ: 11
- INT: B link: 0 bitmap: 0 not routed
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- Assigning IRQ 11 to 0:1.2
- i8259_configure_irq_trigger: current interrupts are 0xe00
- i8259_configure_irq_trigger: try to set interrupts 0xe00
- PIRQ Entry 1 Dev/Fn: 9 Slot: 0
- INT: A link: 2 bitmap: 400 IRQ: 10
- INT: B link: 0 bitmap: 0 not routed
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- Assigning IRQ 10 to 0:9.0
- i8259_configure_irq_trigger: current interrupts are 0xe00
- i8259_configure_irq_trigger: try to set interrupts 0xe00
- PIRQ Entry 2 Dev/Fn: A Slot: 0
- INT: A link: 3 bitmap: 800 IRQ: 11
- INT: B link: 0 bitmap: 0 not routed
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- PIRQ Entry 3 Dev/Fn: B Slot: 0
- INT: A link: 4 bitmap: 200 IRQ: 9
- INT: B link: 0 bitmap: 0 not routed
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- PIRQ Entry 4 Dev/Fn: C Slot: 0
- INT: A link: 1 bitmap: 800 IRQ: 11
- INT: B link: 2 bitmap: 400 IRQ: 10
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- PIRQ Entry 5 Dev/Fn: E Slot: 0
- INT: A link: 3 bitmap: 800 IRQ: 11
- INT: B link: 4 bitmap: 200 IRQ: 9
- INT: C link: 0 bitmap: 0 not routed
- INT: D link: 0 bitmap: 0 not routed
- PIRQ Entry 6 Dev/Fn: F Slot: 0
- INT: A link: 1 bitmap: 800 IRQ: 11
- INT: B link: 2 bitmap: 400 IRQ: 10
- INT: C link: 3 bitmap: 800 IRQ: 11
- INT: D link: 4 bitmap: 200 IRQ: 9
- Assigning IRQ 9 to 0:f.4
- i8259_configure_irq_trigger: current interrupts are 0xe00
- i8259_configure_irq_trigger: try to set interrupts 0xe00
- Assigning IRQ 9 to 0:f.5
- i8259_configure_irq_trigger: current interrupts are 0xe00
- i8259_configure_irq_trigger: try to set interrupts 0xe00
- PIRQ1: 11
- PIRQ2: 10
- PIRQ3: 11
- PIRQ4: 9
- PIRQ table: 144 bytes.
- Adding CBMEM entry as no. 3
- Writing high table forward entry at 0x00000500
- Wrote coreboot table at: 00000500 - 00000518 checksum dc61
- New low_table_end: 0x00000518
- Now going to write high coreboot table at 0x0f7d1400
- rom_table_end = 0x0f7d1400
- Adjust low_table_end from 0x00000518 to 0x00001000
- Adjust rom_table_end from 0x0f7d1400 to 0x0f7e0000
- Adding high table area
- coreboot memory table:
- 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
- 1. 0000000000001000-000000000009ffff: RAM
- 2. 00000000000c0000-000000000f7cffff: RAM
- 3. 000000000f7d0000-000000000f7dffff: CONFIGURATION TABLES
- Wrote coreboot table at: 0f7d1400 - 0f7d15a8 checksum b8ca
- coreboot table: 424 bytes.
- Multiboot Information structure has been written.
- 0. FREE SPACE 0f7d3400 0000cc00
- 1. GDT 0f7d0200 00000200
- 2. IRQ TABLE 0f7d0400 00001000
- 3. COREBOOT 0f7d1400 00002000
- Check CBFS header at fffeffe0
- magic is 4f524243
- Found CBFS header at fffeffe0
- Check pci1022,2081.rom
- CBFS: follow chain: fff80000 + 38 + 8000 + align -> fff88040
- Check fallback/coreboot_ram
- CBFS: follow chain: fff88040 + 38 + 79a3 + align -> fff8fa40
- Check fallback/payload
- Got a payload
- Loading segment from rom address 0xfff8fa78
- Booting 'voyage-linux-30Jun11'
- root (hd0,0)
- Filesystem type is ext2fs, partition type 0x83
- kernel /vmlinuz root=LABEL=ROOT_FS console=ttyS0,38400n8
- [Linux-bzImage, setup=0x3400, size=0x1bfc40]
- initrd /initrd.img
- [Linux-initrd @ 0xf495000, 0x329a86 bytes]
- [ 0.000000] Linux version 2.6.38-voyage (2.6.38-5) (root@punknix-uml) (gcc version 4.4.5 (Debia1
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7cf000 (usable)
- [ 0.000000] BIOS-e820: 000000000f7cf000 - 000000000f7e0000 (reserved)
- [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] last_pfn = 0xf7cf max_arch_pfn = 0x100000
- [ 0.000000] init_memory_mapping: 0000000000000000-000000000f7cf000
- [ 0.000000] RAMDISK: 0f495000 - 0f7bf000
- [ 0.000000] ACPI Error: A valid RSDP was not found (20110112/tbxfroot-219)
- [ 0.000000] 0MB HIGHMEM available.
- [ 0.000000] 247MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 0f7cf000
- [ 0.000000] low ram: 0 - 0f7cf000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x0000f7cf
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0000f7cf
- [ 0.000000] Using APIC driver default
- [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] No local APIC present or hardware disabled
- [ 0.000000] APIC: disable apic facility
- [ 0.000000] APIC: switched to apic NOOP
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at f7e0000 (gap: f7e0000:f0820000)
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 11 pages/cpu @cec00000 s24384 r0 d20672 u4194304
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62830
- [ 0.000000] Kernel command line: root=LABEL=ROOT_FS console=ttyS0,38400n8
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
- [ 0.000000] Memory: 243444k/253756k available (2653k kernel code, 9860k reserved, 1082k data, 3)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xcffcf000 - 0xff7fe000 ( 760 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xcf7cf000 ( 247 MB)
- [ 0.000000] .init : 0xc13a6000 - 0xc13fa000 ( 336 kB)
- [ 0.000000] .data : 0xc12974e8 - 0xc13a5dc0 (1082 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc12974e8 (2653 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] Preemptable hierarchical RCU implementation.
- [ 0.000000] RCU-based detection of stalled CPUs is disabled.
- [ 0.000000] Verbose stalled-CPUs detection is disabled.
- [ 0.000000] NR_IRQS:512
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [ttyS0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 498.055 MHz processor.
- [ 0.003008] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.11 B)
- [ 0.005011] pid_max: default: 32768 minimum: 301
- [ 0.006362] Mount-cache hash table entries: 512
- [ 0.008751] SMP alternatives: switching to UP code
- [ 0.016020] Freeing SMP alternatives: 16k freed
- [ 0.017180] weird, boot CPU (#0) not listed by the BIOS.
- [ 0.018010] SMP motherboard not detected.
- [ 0.019011] Local APIC not detected. Using dummy APIC emulation.
- [ 0.020007] SMP disabled
- [ 0.021009] Performance Events: no PMU driver, software events only.
- [ 0.026027] Brought up 1 CPUs
- [ 0.027014] Total of 1 processors activated (996.11 BogoMIPS).
- [ 0.028485] devtmpfs: initialized
- [ 0.031567] NET: Registered protocol family 16
- [ 0.036646] PCI: PCI BIOS revision 2.10 entry at 0xffe77, last bus=0
- [ 0.037019] PCI: Using configuration type 1 for base access
- [ 0.051834] bio: create slab <bio-0> at 0
- [ 0.053534] ACPI: Interpreter disabled.
- [ 0.054591] vgaarb: loaded
- [ 0.056659] SCSI subsystem initialized
- [ 0.058692] PCI: Probing PCI hardware
- [ 0.074734] Switching to clocksource pit
- [ 0.075500] pnp: PnP ACPI: disabled
- [ 0.100004] NET: Registered protocol family 2
- [ 0.101681] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.104877] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.106223] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.106754] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.107820] TCP reno registered
- [ 0.109265] UDP hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.109813] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.111469] NET: Registered protocol family 1
- [ 0.113060] RPC: Registered udp transport module.
- [ 0.114191] RPC: Registered tcp transport module.
- [ 0.115349] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.116215] Trying to unpack rootfs image as initramfs...
- [ 0.817801] Freeing initrd memory: 3240k freed
- [ 0.823589] platform rtc_cmos: registered platform RTC device (no PNP device found)
- [ 0.827029] microcode: microcode: CPU0: AMD CPU family 0x5 not supported
- [ 0.828526] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.833856] msgmni has been set to 481
- [ 0.836614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 0.837841] io scheduler noop registered
- [ 0.838639] io scheduler deadline registered
- [ 0.839536] io scheduler cfq registered (default)
- [ 1.129932] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- �[ 1.375561] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
- [ 1.625525] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
- [ 1.640185] Linux agpgart interface v0.103
- [ 1.654434] brd: module loaded
- [ 1.655643] Uniform Multi-Platform E-IDE driver
- [ 1.656655] ide-gd driver 1.18
- [ 1.659141] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 1.660525] i8042: No controller found
- [ 1.662823] mousedev: PS/2 mouse device common for all mice
- [ 1.664085] cpuidle: using governor ladder
- [ 1.664428] cpuidle: using governor menu
- [ 1.667792] TCP cubic registered
- [ 1.668509] NET: Registered protocol family 17
- [ 1.669962] Registering the dns_resolver key type
- [ 1.671268] Using IPI No-Shortcut mode
- [ 1.675478] Freeing unused kernel memory: 336k freed
- Loading, please wait...
- [ 1.734493] udev[854]: starting version 164
- [ 1.825250] Switching to clocksource tsc
- [ 2.292284] amd74xx 0000:00:0f.2: UDMA100 controller
- [ 2.454293] amd74xx 0000:00:0f.2: IDE controller (0x1022:0x209a rev 0x01)
- [ 2.714888] amd74xx 0000:00:0f.2: IDE port disabled
- [ 2.763252] via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
- [ 2.911174] amd74xx 0000:00:0f.2: not 100% native mode: will probe irqs later
- [ 3.142137] ide0: BM-DMA at 0x1ca0-0x1ca7
- [ 3.596789] usbcore: registered new interface driver usbfs
- [ 3.620168] hda: CF 1GB, CFA DISK drive
- [ 3.647568] usbcore: registered new interface driver hub
- [ 3.674219] usbcore: registered new device driver usb
- [ 3.717345] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.997853] Clocksource tsc unstable (delta = 73983824 ns)
- [ 4.014415] Switching to clocksource pit
- [ 4.332350] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
- [ 4.333379] hda: UDMA/33 mode selected
- [ 4.335188] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- [ 4.337575] hda: max request size: 128KiB
- [ 4.338633] hda: 1981728 sectors (1014 MB) w/1KiB Cache, CHS=1966/16/63
- [ 4.349397] hda: hda1
- [ 4.355467] eth0: VIA Rhine III (Management Adapter) at 0xfe019000, 00:0d:b9:1a:76:b0, IRQ 10.
- [ 4.358165] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
- [ 4.364106] ehci_hcd 0000:00:0f.5: EHCI Host Controller
- [ 4.364972] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
- [ 4.388969] ehci_hcd 0000:00:0f.5: irq 9, io mem 0xfe017000
- [ 4.395838] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
- [ 4.398488] hub 1-0:1.0: USB hub found
- [ 4.399828] hub 1-0:1.0: 4 ports detected
- [ 4.698660] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.699564] ohci_hcd 0000:00:0f.4: OHCI Host Controller
- [ 4.700317] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
- [ 4.704803] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xfe016000
- [ 4.792617] hub 2-0:1.0: USB hub found
- [ 4.792913] hub 2-0:1.0: 4 ports detected
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Begin: Running /scripts/local-bottom ... done.
- done.
- Begin: Running /scripts/init-bottom ... done.
- INIT: version 2.88 booting
- Using makefile-style concurrent boot in runlevel S.
- Starting the hotplug events dispatcher: udevd[ 5.569680] udev[987]: starting version 164
- .
- Synthesizing the initial hotplug events...[ 6.129830] input: PC Speaker as /devices/platform/pc0
- [ 6.184480] AMD Geode RNG detected
- [ 6.298583] cs5535-mfd 0000:00:0f.0: 5 devices registered.
- [ 6.371577] geode-aes: GEODE AES engine enabled.
- [ 6.947217] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x1c00-0x1c3f]
- [ 6.948212] cs5535-mfgpt cs5535-mfgpt: 2 MFGPT timers available
- [ 6.983923] cs5535-gpio cs5535-gpio: reserved resource region [io 0x1400-0x14ff]
- [ 6.987585] cs5535-gpio cs5535-gpio: GPIO support successfully loaded.
- done.
- Waiting for /dev to be fully populated...[ 7.724211] cs5535-smb cs5535-smb: SCx200 device 'CS55d
- done.
- Activating swap...done.
- [ 9.197317] EXT2-fs (hda1): warning: mounting unchecked fs, running e2fsck is recommended
- Cleaning up ifupdown....
- [ 9.480944] cs5535-mfgpt cs5535-mfgpt: registered timer 0
- [ 9.534064] leds_alix2: forced to skip BIOS test, assume system has ALIX.2 style LEDs
- [ 9.535612] leds_alix2: can't allocate I/O for GPIO
- Loading kernel modules...done.
- Activating lvm and md swap...done.
- Checking file systems...fsck from util-linux-ng 2.17.2
- done.
- Mounting local filesystems...failed.
- Activating swapfile swap...done.
- Cleaning up temporary files....
- Setting kernel variables ...done.
- voyage-sync: Start tmpfs...
- voyage-sync: Copying /ro to /rw
- tar: ./var/lib/dhcp/dhclient.leases: time stamp 2011-06-28 09:13:06 is 365332350.515180459 s in the
- tar: ./var/lib/dhcp: time stamp 2011-06-28 09:13:06 is 365332350.514704421 s in the future
- tar: ./var/lib/logrotate: time stamp 2010-04-17 21:06:01 is 327618325.514475621 s in the future
- tar: ./var/lib: time stamp 2011-06-28 09:29:44 is 365333348.514354098 s in the future
- tar: ./var: time stamp 2011-06-28 09:29:44 is 365333348.514244307 s in the future
- tar: .: time stamp 2011-06-28 09:29:44 is 365333348.512294897 s in the future
- voyage-sync: Setting up tmpfs for changed files...
- voyage-sync: tmpfs: mount back /lib/init/rw/var/log to /var/log
- voyage-sync: tmpfs: mount back /lib/init/rw/var/tmp to /var/tmp
- voyage-sync: Start tmpfs completed
- Setting up resolvconf...done.
- Setting up networking....
- Configuring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1
- Copyright 2004-2010 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- [ 11.763508] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- Listening on LPF/eth0/00:0d:b9:1a:76:b0
- Sending on LPF/eth0/00:0d:b9:1a:76:b0
- Sending on Socket/fallback
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
- DHCPOFFER from 192.168.10.1
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- DHCPACK from 192.168.10.1
- bound to 192.168.10.233 -- renewal in 3316 seconds.
- done.
- Starting portmap daemon....
- Cleaning up temporary files....
- INIT: Entering runlevel: 2
- Using makefile-style concurrent boot in runlevel 2.
- Starting portmap daemon...Already running..
- Starting watchdog keepalive daemon: wd_keepalive.
- [ 14.009983] wd_keepalive (1517): /proc/1517/oom_adj is deprecated, please use /proc/1517/oom_sc.
- Starting system log daemon....
- [ 14.088145] NET: Registered protocol family 10
- Starting DNS forwarder and DHCP server: dnsmasq.
- Starting kernel log daemon....
- Starting OpenBSD Secure Shell server: sshd.
- Starting periodic command scheduler: cron.
- nocatsplash daemon disabled - read /etc/default/nocatsplash.
- Remounting / as read-write ... Done.
- Removing /etc/nologin ... Done.
- Remounting / as read-only ... Done.
- /etc/init.d/voyage-util: 13: cannot create /sys/class/leds/alix:1/trigger: Directory nonexistent
- Stopping watchdog keepalive daemon....
- Starting watchdog daemon....
- startpar: service(s) returned failure: voyage-util ... failed!
- Debian GNU/Linux 6.0 voyage ttyS0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement