Advertisement
Guest User

Untitled

a guest
Aug 22nd, 2013
208
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 54.02 KB | None | 0 0
  1. <6>[ 0.000000] Initializing cgroup subsys cpuset
  2. <5>[ 0.000000] Linux version 3.0.8+ (root@tom-desktop) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #167 PREEMPT Mon Oct 15 20:14:30 CST 2012
  3. <4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387f
  4. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. <4>[ 0.000000] Machine: sun5i
  6. <6>[ 0.000000] Total Detected Memory: 512MB with 2 banks
  7. <6>[ 0.000000] Memory Reserved(in bytes):
  8. <6>[ 0.000000] LCD: 0x48000000, 0x01000000
  9. <6>[ 0.000000] SYS: 0x43000000, 0x00010000
  10. <6>[ 0.000000] VE : 0x44000000, 0x04000000
  11. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  12. <7>[ 0.000000] On node 0 totalpages: 114688
  13. <7>[ 0.000000] free_area_init_node: node 0, pgdat c08f8864, node_mem_map c0ab4000
  14. <7>[ 0.000000] Normal zone: 1024 pages used for memmap
  15. <7>[ 0.000000] Normal zone: 0 pages reserved
  16. <7>[ 0.000000] Normal zone: 113664 pages, LIFO batch:31
  17. <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  18. <7>[ 0.000000] pcpu-alloc: [0] 0
  19. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664
  20. <5>[ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=5
  21. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  22. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  24. <6>[ 0.000000] Memory: 144MB 304MB = 448MB total
  25. <5>[ 0.000000] Memory: 361240k/361240k available, 97512k reserved, 0K highmem
  26. <5>[ 0.000000] Virtual kernel memory layout:
  27. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  29. <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  30. <5>[ 0.000000] vmalloc : 0xe0800000 - 0xf0000000 ( 248 MB)
  31. <5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  32. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  33. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  34. <5>[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
  35. <5>[ 0.000000] .text : 0xc0032000 - 0xc08048f8 (8011 kB)
  36. <5>[ 0.000000] .data : 0xc0806000 - 0xc08ff728 ( 998 kB)
  37. <5>[ 0.000000] .bss : 0xc08ff74c - 0xc0ab36fc (1744 kB)
  38. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  39. <6>[ 0.000000] NR_IRQS:96 nr_irqs:96 96
  40. <6>[ 0.000000] timer0: Periodic Mode
  41. <4>[ 0.000000] sw_timer_init,line:372
  42. <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  43. <4>[ 0.000000] aw_clksrc_init, line:339
  44. <6>[ 0.000000] Console: colour dummy device 80x30
  45. <3>[ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
  46. <6>[ 0.000116] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  47. <6>[ 0.040020] pid_max: default: 32768 minimum: 301
  48. <6>[ 0.040140] Mount-cache hash table entries: 512
  49. <6>[ 0.040453] Initializing cgroup subsys cpuacct
  50. <6>[ 0.040472] Initializing cgroup subsys devices
  51. <6>[ 0.040482] Initializing cgroup subsys freezer
  52. <6>[ 0.040490] Initializing cgroup subsys blkio
  53. <6>[ 0.040562] CPU: Testing write buffer coherency: ok
  54. <6>[ 0.040772] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  55. <6>[ 0.041287] devtmpfs: initialized
  56. <6>[ 0.042539] print_constraints: dummy:
  57. <6>[ 0.042691] NET: Registered protocol family 16
  58. <6>[ 0.043200] hw-breakpoint: debug architecture 0x4 unsupported.
  59. <4>[ 0.043628] try to parse apb frequency from script faild!
  60. <4>[ 0.043717] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  61. <6>[ 0.043777] Initialize DMAC OK
  62. <6>[ 0.048001] bio: create slab <bio-0> at 0
  63. <5>[ 0.048579] SCSI subsystem initialized
  64. <6>[ 0.048788] usbcore: registered new interface driver usbfs
  65. <6>[ 0.048858] usbcore: registered new interface driver hub
  66. <6>[ 0.048992] usbcore: registered new device driver usb
  67. <6>[ 0.049402] Advanced Linux Sound Architecture Driver Version 1.0.24.
  68. <6>[ 0.050000] cfg80211: Calling CRDA to update world regulatory domain
  69. <4>[ 0.050000] Init eGon pin module V2.0
  70. <6>[ 0.050000] Switching to clocksource aw 64bits couter
  71. <5>[ 0.050000] FS-Cache: Loaded
  72. <6>[ 0.050000] CacheFiles: Loaded
  73. <6>[ 0.050000] Switched to NOHz mode on CPU #0
  74. <4>[ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG
  75. <4>[ 0.050000] [sw_hcd0]: usb host driver initialize........
  76. <4>[ 0.050000] [sw_hcd0]: open_usb_clock
  77. <4>[ 0.065375] [sw_hcd0]: host_init_state = 0
  78. <4>[ 0.065383] [sw_hcd0]: platform is usb host
  79. <4>[ 0.065451] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  80. <6>[ 0.065473] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  81. <6>[ 0.065489] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  82. <6>[ 0.065994] hub 1-0:1.0: USB hub found
  83. <6>[ 0.066019] hub 1-0:1.0: 1 port detected
  84. <4>[ 0.066046] wrn: hcd is not enable, need not start hcd
  85. <4>[ 0.066228] [sw_hcd0]: sw_usb_host0_disable start
  86. <4>[ 0.066239] -------sw_hcd0_soft_disconnect---------
  87. <4>[ 0.066251] [sw_hcd_host0]: Set USB Power OFF
  88. <4>[ 0.066260] wrn: hcd is not enable, need not stop hcd
  89. <4>[ 0.066289] [sw_hcd0]: close_usb_clock
  90. <4>[ 0.066329] [sw_hcd0]: sw_usb_host0_disable end
  91. <4>[ 0.066365] [sw_udc]: udc_init: version 20080411
  92. <6>[ 0.066712] NET: Registered protocol family 2
  93. <6>[ 0.066830] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  94. <6>[ 0.067091] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  95. <6>[ 0.067320] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  96. <6>[ 0.067450] TCP: Hash tables configured (established 16384 bind 16384)
  97. <6>[ 0.067461] TCP reno registered
  98. <6>[ 0.067471] UDP hash table entries: 256 (order: 0, 4096 bytes)
  99. <6>[ 0.067489] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  100. <6>[ 0.067636] NET: Registered protocol family 1
  101. <6>[ 0.067964] RPC: Registered named UNIX socket transport module.
  102. <6>[ 0.067976] RPC: Registered udp transport module.
  103. <6>[ 0.067983] RPC: Registered tcp transport module.
  104. <6>[ 0.067990] RPC: Registered tcp NFSv4.1 backchannel transport module.
  105. <6>[ 0.068165] Trying to unpack rootfs image as initramfs...
  106. <6>[ 0.111759] Freeing initrd memory: 536K
  107. <4>[ 0.111880] [pm]aw_pm_init!
  108. <6>[ 0.111894] standby_mode = 1.
  109. <6>[ 0.112099] audit: initializing netlink socket (disabled)
  110. <5>[ 0.112146] type=2000 audit(0.109:1): initialized
  111. <6>[ 0.122002] ashmem: initialized
  112. <5>[ 0.127779] VFS: Disk quotas dquot_6.5.2
  113. <4>[ 0.127952] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  114. <6>[ 0.130891] NTFS driver 2.1.30 [Flags: R/W].
  115. <6>[ 0.131197] fuse init (API version 7.16)
  116. <6>[ 0.131768] msgmni has been set to 706
  117. <6>[ 0.136144] alg: No test for stdrng (krng)
  118. <6>[ 0.136399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  119. <6>[ 0.136416] io scheduler noop registered
  120. <6>[ 0.136425] io scheduler deadline registered
  121. <6>[ 0.136508] io scheduler cfq registered (default)
  122. <6>[ 0.137153] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  123. <6>[ 0.138810] brd: module loaded
  124. <6>[ 0.140839] loop: module loaded
  125. <4>[ 0.140860] [NAND]nand driver, init.
  126. <4>[ 0.140871] [NAND] nand driver version: 0x2, 0x10, data: 20120610
  127. <4>[ 0.140879] [NAND] nand clk request start
  128. <4>[ 0.140903] [NAND] nand clk request ok!
  129. <4>[ 0.140951] [NAND] nand gpio_request
  130. <4>[ 0.140995] [NAND] nand gpio_request fail
  131. <4>[ 0.141008] NAND_RequestDMA ok
  132. <4>[ 0.141924] [NAND] nand driver version: 0x2 0x10
  133. <4>[ 0.141953] nand interrupte register ok
  134. <4>[ 0.171964] The 0 disk name = bootloader, class name = DISK, disk size = -544396252
  135. <4>[ 0.171980] The 1 disk name = env, class name = DISK, disk size = -544396188
  136. <4>[ 0.171990] The 2 disk name = boot, class name = DISK, disk size = -544396124
  137. <4>[ 0.172000] The 3 disk name = system, class name = DISK, disk size = -544396060
  138. <4>[ 0.172010] The 4 disk name = data, class name = DISK, disk size = -544395996
  139. <4>[ 0.172019] The 5 disk name = misc, class name = DISK, disk size = -544395932
  140. <4>[ 0.172029] The 6 disk name = recovery, class name = DISK, disk size = -544395868
  141. <4>[ 0.172039] The 7 disk name = cache, class name = DISK, disk size = -544395804
  142. <4>[ 0.172049] The 8 disk name = databk, class name = DISK, disk size = -544395740
  143. <4>[ 0.172058] The 9 disk name = UDISK, class name = DISK, disk size = -544395676
  144. <4>[ 0.172068] The 9 disk size = 10846208
  145. <4>[ 0.172076] part total count = 10
  146. <6>[ 0.173534] nanda:
  147. <6>[ 0.175170] nandb: unknown partition table
  148. <6>[ 0.176712] nandc: unknown partition table
  149. <6>[ 0.178780] nandd: unknown partition table
  150. <6>[ 0.180818] nande: unknown partition table
  151. <6>[ 0.182408] nandf: unknown partition table
  152. <6>[ 0.183934] nandg: unknown partition table
  153. <6>[ 0.185983] nandh: unknown partition table
  154. <6>[ 0.188028] nandi: unknown partition table
  155. <6>[ 0.189814] nandj:
  156. <6>[ 0.189982] benn: nand probe enter
  157. <4>[ 0.190095] [NAND]nand driver, ok.
  158. <4>[ 0.190444] drivers/spi/spi_sunxi.c(L2114) sw spi init fetch spi0 uning configuration failed
  159. <4>[ 0.190466] drivers/spi/spi_sunxi.c(L2005) Get spi devices number failed
  160. <4>[ 0.190479] drivers/spi/spi_sunxi.c(L2124) register spi devices board info failed
  161. <4>[ 0.190489] cannot find any using configuration for all spi controllers!
  162. <6>[ 0.190512] PPP generic driver version 2.4.2
  163. <6>[ 0.190740] PPP Deflate Compression module registered
  164. <6>[ 0.190751] PPP BSD Compression module registered
  165. <6>[ 0.191719] PPP MPPE Compression module registered
  166. <6>[ 0.191738] NET: Registered protocol family 24
  167. <6>[ 0.191783] PPTP driver version 0.8.5
  168. <6>[ 0.192120] tun: Universal TUN/TAP device driver, 1.6
  169. <6>[ 0.192129] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  170. <6>[ 0.192396] usbcore: registered new interface driver cdc_ether
  171. <6>[ 0.192447] usbcore: registered new interface driver cdc_eem
  172. <6>[ 0.192505] usbcore: registered new interface driver cdc_subset
  173. <6>[ 0.192551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  174. <6>[ 0.192614] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  175. <6>[ 0.192658] Initializing USB Mass Storage driver...
  176. <6>[ 0.192757] usbcore: registered new interface driver usb-storage
  177. <6>[ 0.192765] USB Mass Storage support registered.
  178. <6>[ 0.192820] usbcore: registered new interface driver ums-alauda
  179. <6>[ 0.192867] usbcore: registered new interface driver ums-cypress
  180. <6>[ 0.192911] usbcore: registered new interface driver ums-datafab
  181. <6>[ 0.192956] usbcore: registered new interface driver ums_eneub6250
  182. <6>[ 0.193003] usbcore: registered new interface driver ums-freecom
  183. <6>[ 0.193048] usbcore: registered new interface driver ums-isd200
  184. <6>[ 0.193093] usbcore: registered new interface driver ums-jumpshot
  185. <6>[ 0.193146] usbcore: registered new interface driver ums-karma
  186. <6>[ 0.193192] usbcore: registered new interface driver ums-onetouch
  187. <6>[ 0.193250] usbcore: registered new interface driver ums-realtek
  188. <6>[ 0.193303] usbcore: registered new interface driver ums-sddr09
  189. <6>[ 0.193353] usbcore: registered new interface driver ums-sddr55
  190. <6>[ 0.193398] usbcore: registered new interface driver ums-usbat
  191. <6>[ 0.193529] usbcore: registered new interface driver usbserial
  192. <6>[ 0.193577] USB Serial support registered for generic
  193. <6>[ 0.193629] usbcore: registered new interface driver usbserial_generic
  194. <6>[ 0.193637] usbserial: USB Serial Driver core
  195. <6>[ 0.193674] USB Serial support registered for GSM modem (1-port)
  196. <6>[ 0.193799] usbcore: registered new interface driver option
  197. <6>[ 0.193807] option: v0.7.2:USB Driver for GSM modems
  198. <4>[ 0.193844] ------print_msc_config-----
  199. <4>[ 0.193852] vendor_id = 0x18d1
  200. <4>[ 0.193858] mass_storage_id = 0x1
  201. <4>[ 0.193865] adb_id = 0x2
  202. <4>[ 0.193870] usb_manufacturer_name = USB Developer
  203. <4>[ 0.193877] usb_product_name = Android
  204. <4>[ 0.193884] usb_serial_number = 20080411
  205. <4>[ 0.193893] msc_vendor_name = USB 2.0
  206. <4>[ 0.193900] msc_product_name = USB Flash Driver
  207. <4>[ 0.193907] msc_release = 100
  208. <4>[ 0.193913] luns = 2
  209. <4>[ 0.193919] ---------------------------
  210. <4>[ 0.194070] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
  211. <4>[ 0.194085] [sw_udc]: alloc request: ep(0xc08e2428, ep0, 64), req(0xdfbe4f80)
  212. <4>[ 0.194105] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  213. <4>[ 0.194117] [sw_udc]: sw_udc_pullup, is_on = 0
  214. <4>[ 0.194127] WRN:L2729(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  215. <6>[ 0.195321] android_usb gadget: Mass Storage Function, version: 2009/09/11
  216. <6>[ 0.195336] android_usb gadget: Number of LUNs=2
  217. <6>[ 0.195346] lun0: LUN: removable file: (no medium)
  218. <6>[ 0.195355] lun1: LUN: removable file: (no medium)
  219. <4>[ 0.195364] lun name: lun
  220. <4>[ 0.195375] lun name: lun1
  221. <4>[ 0.195530] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  222. <6>[ 0.195551] android_usb gadget: android_usb ready
  223. <6>[ 0.195670] mousedev: PS/2 mouse device common for all mice
  224. <6>[ 0.195916] input: sun4i-keyboard as /devices/virtual/input/input0
  225. <4>[ 0.196028] ==register_early_suspend =
  226. <6>[ 0.196456] i2c /dev entries driver
  227. <4>[ 0.196584] !!! base_Addr = 0xe08eac00
  228. <4>[ 0.196605] config i2c gpio with gpio_config api
  229. <4>[ 0.196659] twi0, apb clock = 24000000
  230. <6>[ 0.198546] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  231. <4>[ 0.199487] rtc_detect,line:197
  232. <6>[ 0.199497] I2C: i2c-0: AW16XX I2C adapter
  233. <4>[ 0.199503] **********start************
  234. <4>[ 0.199509] 0x40
  235. <4>[ 0.199514] 0xf8
  236. <4>[ 0.199519] 0x28
  237. <4>[ 0.199524] 0x0
  238. <4>[ 0.199529] 0x0
  239. <4>[ 0.199533] **********end************
  240. <4>[ 0.199576] !!! base_Addr = 0xe08ec000
  241. <4>[ 0.199626] twi1, apb clock = 24000000
  242. <6>[ 0.199834] rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
  243. <6>[ 0.199908] pcf8563 1-0051: chip found, driver version 0.4.3
  244. <4>[ 0.203760] rtc (null): alarm rollover not handled
  245. <6>[ 0.203969] using rtc device, pcf8563, for alarms
  246. <6>[ 0.204007] pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
  247. <6>[ 0.206536] I2C: i2c-1: AW16XX I2C adapter
  248. <4>[ 0.206545] **********start************
  249. <4>[ 0.206552] 0x40
  250. <4>[ 0.206556] 0xf8
  251. <4>[ 0.206561] 0x58
  252. <4>[ 0.206566] 0x0
  253. <4>[ 0.206570] 0x0
  254. <4>[ 0.206574] **********end************
  255. <4>[ 0.206621] !!! base_Addr = 0xe08ee400
  256. <4>[ 0.206674] twi2, apb clock = 24000000
  257. <4>[ 0.206858] rtc_detect,line:197
  258. <6>[ 0.206867] I2C: i2c-2: AW16XX I2C adapter
  259. <4>[ 0.206873] **********start************
  260. <4>[ 0.206880] 0x40
  261. <4>[ 0.206884] 0xf8
  262. <4>[ 0.206889] 0x58
  263. <4>[ 0.206894] 0x0
  264. <4>[ 0.206898] 0x0
  265. <4>[ 0.206903] **********end************
  266. <6>[ 0.207057] lirc_dev: IR Remote Control driver registered, major 250
  267. <6>[ 0.207070] IR NEC protocol handler initialized
  268. <6>[ 0.207077] IR RC5(x) protocol handler initialized
  269. <6>[ 0.207084] IR RC6 protocol handler initialized
  270. <6>[ 0.207091] IR JVC protocol handler initialized
  271. <6>[ 0.207098] IR Sony protocol handler initialized
  272. <6>[ 0.207105] IR RC5 (streamzap) protocol handler initialized
  273. <6>[ 0.207112] IR LIRC bridge handler initialized
  274. <6>[ 0.207119] Linux video capture interface: v2.00
  275. <4>[ 0.207150] [pa_drv] start!!!
  276. <4>[ 0.207397] [pa_drv] init end!!!
  277. <6>[ 0.207506] print_constraints: axp20_ldo1: 1300 mV
  278. <6>[ 0.208433] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  279. <6>[ 0.209566] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 3300 mV
  280. <6>[ 0.210529] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
  281. <6>[ 0.211423] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  282. <6>[ 0.212313] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1200 mV
  283. <6>[ 0.212716] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  284. <6>[ 0.212991] input: axp20-supplyer as /devices/platform/sun5i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  285. <4>[ 0.220241] pmu_pekoff_time = 6000
  286. <4>[ 0.220251] pmu_pekoff_en = 1
  287. <4>[ 0.220257] pmu_peklong_time = 1500
  288. <4>[ 0.220263] pmu_pekon_time = 1000
  289. <4>[ 0.220268] pmu_pwrok_time = 64
  290. <4>[ 0.220274] pmu_pwrnoe_time = 2000
  291. <4>[ 0.220280] pmu_intotp_en = 1
  292. <4>[ 0.220753] [AXP]POWER20_OFF_CTL:1974-->0x42
  293. <4>[ 0.221226] POWER20_PEK_SET:1991-->0x9d
  294. <4>[ 0.221698] POWER20_PEK_SET:2002-->0x9d
  295. <4>[ 0.222169] POWER20_PEK_SET:2011-->0x9d
  296. <4>[ 0.222641] POWER20_PEK_SET:2022-->0x9d
  297. <4>[ 0.223113] POWER20_PEK_SET:2034-->0x9d
  298. <4>[ 0.223585] POWER20_HOTOVER_CTL:2043-->0xad
  299. <4>[ 0.227322] [AXP]last_rest_vol = 100, now_rest_vol = 99
  300. <4>[ 0.228838] [AXP]Cur_CoulombCounter = -39
  301. <4>[ 0.228847] [AXP]charger->rest_vol = 100
  302. <6>[ 0.231661] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  303. <6>[ 0.232092] device-mapper: multipath: version 1.3.0 loaded
  304. <6>[ 0.232108] device-mapper: multipath round-robin: version 1.0.0 loaded
  305. <6>[ 0.232118] device-mapper: multipath queue-length: version 0.1.0 loaded
  306. <6>[ 0.232133] device-mapper: multipath service-time: version 0.2.0 loaded
  307. <4>[ 0.232645] [mmc_pm]: no sdio card used in configuration
  308. <4>[ 0.232657] [mmc]: sunximmc_init
  309. <4>[ 0.232766] [mmc]: sunxi mmc controller using config : 0x1
  310. <4>[ 0.232826] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  311. <4>[ 0.233144] [mmc]: mmc 0 power off !!
  312. <4>[ 0.233228] [mmc]: mmc0 Probe: base:0xe08f0000 irq:32 dma:0 pdes:0xdf020000, ret 0.
  313. <6>[ 0.233914] usbcore: registered new interface driver usbhid
  314. <6>[ 0.233923] usbhid: USB HID core driver
  315. <6>[ 0.234385] logger: created 256K log 'log_main'
  316. <6>[ 0.234469] logger: created 256K log 'log_events'
  317. <6>[ 0.234539] logger: created 256K log 'log_radio'
  318. <6>[ 0.234608] logger: created 256K log 'log_system'
  319. <4>[ 0.235123] enter sun5i Audio codec!!!
  320. <6>[ 0.235807] sun5i audio support initialized
  321. <4>[ 0.236027] sun5i Audio codec successfully loaded..
  322. <6>[ 0.236077] ALSA device list:
  323. <6>[ 0.236085] #0: sun5i-CODEC Audio Codec
  324. <6>[ 0.236245] Netfilter messages via NETLINK v0.30.
  325. <6>[ 0.236330] nf_conntrack version 0.5.0 (5652 buckets, 22608 max)
  326. <6>[ 0.236823] ctnetlink v0.93: registering with nfnetlink.
  327. <6>[ 0.236842] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  328. <6>[ 0.236850] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  329. <6>[ 0.237127] IPv4 over IPv4 tunneling driver
  330. <6>[ 0.237439] GRE over IPv4 demultiplexor driver
  331. <6>[ 0.237449] GRE over IPv4 tunneling driver
  332. <6>[ 0.237915] ip_tables: (C) 2000-2006 Netfilter Core Team
  333. <6>[ 0.238072] TCP cubic registered
  334. <6>[ 0.238085] Initializing XFRM netlink socket
  335. <6>[ 0.238797] NET: Registered protocol family 10
  336. <6>[ 0.239582] ip6_tables: (C) 2000-2006 Netfilter Core Team
  337. <6>[ 0.239743] IPv6 over IPv4 tunneling driver
  338. <6>[ 0.240678] NET: Registered protocol family 17
  339. <6>[ 0.240722] NET: Registered protocol family 15
  340. <6>[ 0.240740] L2TP core driver, V2.0
  341. <6>[ 0.240757] PPPoL2TP kernel driver, V2.0
  342. <6>[ 0.240763] L2TP IP encapsulation support (L2TPv3)
  343. <6>[ 0.241001] L2TP netlink interface
  344. <6>[ 0.241035] L2TP ethernet pseudowire support (L2TPv3)
  345. <6>[ 0.241044] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  346. <5>[ 0.241076] Registering SWP/SWPB emulation handler
  347. <4>[ 0.241335] dram_sysdev_init finished!
  348. <6>[ 0.242319] registered taskstats version 1
  349. <4>[ 0.242347] [LCD] lcd_module_init
  350. <4>[ 0.810035] [DISP] *****************************************************************
  351. <4>[ 0.810057] [DISP] ***
  352. <4>[ 0.810063] [DISP] *** LCD Panel Parameter Check
  353. <4>[ 0.810070] [DISP] ***
  354. <4>[ 0.810077] [DISP] *** by dulianping
  355. <4>[ 0.810084] [DISP] ***
  356. <4>[ 0.810089] [DISP] *****************************************************************
  357. <4>[ 0.810098] [DISP] ***
  358. <4>[ 0.810104] [DISP] *** Interface:
  359. <4>[ 0.810110] [DISP] *** Parallel HV Panel
  360. <4>[ 0.810118] [DISP] *** Lcd Frm to RGB666
  361. <4>[ 0.810124] [DISP] ***
  362. <4>[ 0.810130] [DISP] *** Timing:
  363. <4>[ 0.810136] [DISP] *** lcd_x: 800
  364. <4>[ 0.810143] [DISP] *** lcd_y: 480
  365. <4>[ 0.810151] [DISP] *** lcd_ht: 928
  366. <4>[ 0.810158] [DISP] *** lcd_hbp: 88
  367. <4>[ 0.810165] [DISP] *** lcd_vt: 1050
  368. <4>[ 0.810172] [DISP] *** lcd_vbp: 32
  369. <4>[ 0.810179] [DISP] *** lcd_hspw: 30
  370. <4>[ 0.810186] [DISP] *** lcd_vspw: 13
  371. <4>[ 0.810193] [DISP] *** lcd_frame_frq: 80Hz
  372. <4>[ 0.810200] [DISP] ***
  373. <4>[ 0.810206] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  374. <4>[ 0.810214] [DISP] ***
  375. <4>[ 0.810220] [DISP] *** LCD Panel Parameter Check End
  376. <4>[ 0.810227] [DISP] *****************************************************************
  377. <4>[ 0.813883] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  378. <4>[ 0.814153] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  379. <4>[ 0.814421] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  380. <4>[ 0.814688] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  381. <4>[ 0.814957] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  382. <4>[ 0.815223] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
  383. <4>[ 0.815953] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a957c
  384. <4>[ 0.815983] [sw-ehci1]: open clock
  385. <4>[ 0.835986] usb_passby en=1,passly=0
  386. <4>[ 0.835994] hci_port_configure en=1,config_cnt=0
  387. <4>[ 0.836006] [sw-ehci1]: Set USB Power ON
  388. <6>[ 0.836752] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  389. <6>[ 0.836787] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  390. <6>[ 0.836902] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  391. <6>[ 0.850051] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  392. <4>[ 0.850064] ehci_irq: port change detect
  393. <6>[ 0.850627] hub 2-0:1.0: USB hub found
  394. <6>[ 0.850655] hub 2-0:1.0: 1 port detected
  395. <4>[ 0.850885] [sw-ehci1]: sw_usb_disable_ehci
  396. <4>[ 0.850898] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a957c
  397. <6>[ 0.850909] sw-ehci sw-ehci.1: remove, state 1
  398. <6>[ 0.850930] usb usb2: USB disconnect, device number 1
  399. <6>[ 0.851973] sw-ehci sw-ehci.1: USB bus 2 deregistered
  400. <4>[ 0.851990] [sw-ehci1]: Set USB Power OFF
  401. <4>[ 0.852491] hci_port_configure en=0,config_cnt=1
  402. <4>[ 0.852500] usb_passby en=0,passly=1
  403. <4>[ 0.852507] [sw-ehci1]: close clock
  404. <4>[ 0.852669] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a9694
  405. <4>[ 0.852684] [sw-ohci1]: open clock
  406. <4>[ 0.872702] hci_port_configure en=1,config_cnt=0
  407. <4>[ 0.872710] usb_passby en=1,passly=0
  408. <4>[ 0.872717] [sw-ohci1]: Set USB Power ON
  409. <6>[ 0.873461] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  410. <6>[ 0.873490] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  411. <6>[ 0.873528] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
  412. <6>[ 0.934456] hub 2-0:1.0: USB hub found
  413. <6>[ 0.934480] hub 2-0:1.0: 1 port detected
  414. <4>[ 0.934686] [sw-ohci1]: sw_usb_disable_ohci
  415. <4>[ 0.934699] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a9694
  416. <6>[ 0.934710] sw-ohci sw-ohci.1: remove, state 1
  417. <6>[ 0.934725] usb usb2: USB disconnect, device number 1
  418. <6>[ 0.935056] sw-ohci sw-ohci.1: USB bus 2 deregistered
  419. <4>[ 0.935072] [sw-ohci1]: Set USB Power OFF
  420. <4>[ 0.935554] usb_passby en=0,passly=1
  421. <4>[ 0.935562] hci_port_configure en=0,config_cnt=1
  422. <4>[ 0.935569] [sw-ohci1]: close clock
  423. <6>[ 0.936623] pcf8563 1-0051: setting system clock to 2013-08-22 15:09:40 UTC (1377184180)
  424. <4>[ 0.936745] Warning: unable to open an initial console.
  425. <6>[ 0.936812] Freeing init memory: 168K
  426. <3>[ 0.991747] init: width = 800
  427. <3>[ 0.991772] init: height = 480
  428. <3>[ 0.991783] init: s.st_size = 1536000
  429. <6>[ 1.001799] init: command 'loglevel' r=0
  430. <6>[ 1.001846] init: command 'export' r=0
  431. <6>[ 1.001860] init: command 'export' r=0
  432. <6>[ 1.001874] init: command 'export' r=0
  433. <6>[ 1.001887] init: command 'export' r=0
  434. <6>[ 1.001900] init: command 'export' r=0
  435. <6>[ 1.001912] init: command 'export' r=0
  436. <6>[ 1.001925] init: command 'export' r=0
  437. <6>[ 1.001938] init: command 'export' r=0
  438. <6>[ 1.001953] init: command 'export' r=0
  439. <6>[ 1.002059] init: command 'symlink' r=0
  440. <6>[ 1.002096] init: command 'symlink' r=0
  441. <6>[ 1.002130] init: command 'symlink' r=0
  442. <6>[ 1.002158] init: command 'mkdir' r=0
  443. <6>[ 1.002421] init: command 'mount' r=0
  444. <6>[ 1.002548] init: command 'mkdir' r=0
  445. <6>[ 1.002589] init: command 'mkdir' r=0
  446. <6>[ 1.002622] init: command 'mkdir' r=0
  447. <6>[ 1.002656] init: command 'mkdir' r=0
  448. <6>[ 1.002686] init: command 'mkdir' r=0
  449. <6>[ 1.002716] init: command 'mkdir' r=0
  450. <6>[ 1.002749] init: command 'mkdir' r=0
  451. <6>[ 1.002777] init: command 'mkdir' r=0
  452. <6>[ 1.002807] init: command 'mkdir' r=0
  453. <6>[ 1.002912] init: command 'mount' r=0
  454. <6>[ 1.002949] init: command 'mkdir' r=0
  455. <6>[ 1.003020] init: command 'mount' r=0
  456. <6>[ 1.003148] init: command 'write' r=0
  457. <6>[ 1.003228] init: command 'write' r=-2
  458. <6>[ 1.003301] init: command 'write' r=0
  459. <6>[ 1.003350] init: command 'write' r=0
  460. <6>[ 1.003393] init: command 'write' r=0
  461. <6>[ 1.003442] init: command 'write' r=-2
  462. <6>[ 1.003483] init: command 'write' r=0
  463. <6>[ 1.003518] init: command 'mkdir' r=0
  464. <6>[ 1.003590] init: command 'mount' r=-1
  465. <6>[ 1.003618] init: command 'chown' r=0
  466. <6>[ 1.003644] init: command 'chown' r=-2
  467. <6>[ 1.003667] init: command 'chmod' r=-2
  468. <6>[ 1.003760] init: command 'write' r=0
  469. <6>[ 1.003793] init: command 'mkdir' r=0
  470. <6>[ 1.003820] init: command 'chown' r=-2
  471. <6>[ 1.003842] init: command 'chmod' r=-2
  472. <6>[ 1.003899] init: command 'write' r=0
  473. <6>[ 1.003929] init: command 'mkdir' r=0
  474. <6>[ 1.003955] init: command 'chown' r=-2
  475. <6>[ 1.003977] init: command 'chmod' r=-2
  476. <6>[ 1.004028] init: command 'write' r=0
  477. <6>[ 1.004053] init: command 'chmod' r=0
  478. <6>[ 1.004081] init: processing action 0x77a00 (fs)
  479. <6>[ 1.014914] EXT4-fs (nandd): barriers disabled
  480. <6>[ 1.016736] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
  481. <6>[ 1.016809] init: command 'mount' r=0
  482. <6>[ 1.016879] init: command 'wait' r=0
  483. <6>[ 1.027981] EXT4-fs (nande): barriers disabled
  484. <6>[ 1.029313] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0
  485. <6>[ 1.029484] init: command 'mount' r=0
  486. <6>[ 1.029646] init: command 'setupfs' r=0
  487. <3>[ 1.029662] init: do_umount: /data
  488. <6>[ 1.040115] init: command 'umount' r=0
  489. <6>[ 1.131353] init: command 'exec' r=0
  490. <6>[ 1.220847] EXT4-fs (nande): barriers disabled
  491. <6>[ 1.222237] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
  492. <6>[ 1.222607] init: command 'exec' r=0
  493. <4>[ 1.230068] [mmc]: mmc 0 detect change, present 1
  494. <6>[ 1.232732] EXT4-fs (nandh): barriers disabled
  495. <6>[ 1.234112] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0
  496. <6>[ 1.234180] init: command 'mount' r=0
  497. <6>[ 1.234324] init: command 'setupfs' r=0
  498. <3>[ 1.234342] init: do_umount: /cache
  499. <6>[ 1.240125] init: command 'umount' r=0
  500. <6>[ 1.256212] init: command 'exec' r=0
  501. <6>[ 1.268142] EXT4-fs (nandh): barriers disabled
  502. <6>[ 1.269592] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
  503. <6>[ 1.269943] init: command 'exec' r=0
  504. <3>[ 1.271769] init: dont need format /dev/block/nandj
  505. <6>[ 1.271793] init: command 'format_userdata' r=1
  506. <6>[ 1.271840] init: command 'wait' r=0
  507. <6>[ 1.282503] EXT4-fs (nandi): barriers disabled
  508. <6>[ 1.283854] EXT4-fs (nandi): mounted filesystem with ordered data mode. Opts: barrier=0
  509. <6>[ 1.283917] init: command 'mount' r=0
  510. <6>[ 1.284054] init: command 'setupfs' r=0
  511. <3>[ 1.284076] init: do_umount: /databk
  512. <6>[ 1.290119] init: command 'umount' r=0
  513. <6>[ 1.290197] init: command 'rmdir' r=0
  514. <6>[ 1.290226] init: processing action 0x720a0 (post-fs)
  515. <6>[ 1.290345] init: command 'chown' r=0
  516. <6>[ 1.290382] init: command 'chmod' r=0
  517. <6>[ 1.291439] init: command 'chown' r=-2
  518. <6>[ 1.291473] init: command 'chmod' r=-2
  519. <6>[ 1.291538] init: command 'chown' r=0
  520. <6>[ 1.291573] init: command 'chmod' r=0
  521. <6>[ 1.291609] init: command 'chown' r=0
  522. <6>[ 1.291640] init: command 'chmod' r=0
  523. <6>[ 1.291689] init: command 'chown' r=0
  524. <6>[ 1.291721] init: command 'chmod' r=0
  525. <6>[ 1.291806] init: command 'mkdir' r=0
  526. <6>[ 1.291834] init: processing action 0x72290 (post-fs-data)
  527. <6>[ 1.291887] init: command 'chown' r=0
  528. <6>[ 1.291917] init: command 'chmod' r=0
  529. <6>[ 1.293523] init: command 'mkdir' r=0
  530. <6>[ 1.293575] init: command 'copy' r=-1
  531. <6>[ 1.294999] init: command 'chown' r=-2
  532. <6>[ 1.295029] init: command 'chmod' r=-2
  533. <6>[ 1.295057] init: command 'copy' r=-1
  534. <6>[ 1.295086] init: command 'chown' r=-2
  535. <6>[ 1.295104] init: command 'chmod' r=-2
  536. <6>[ 1.295140] init: command 'write' r=-2
  537. <6>[ 1.295222] init: command 'mkdir' r=0
  538. <6>[ 1.296278] init: command 'mkdir' r=0
  539. <6>[ 1.296351] init: command 'mkdir' r=0
  540. <6>[ 1.296410] init: command 'mkdir' r=0
  541. <6>[ 1.296464] init: command 'mkdir' r=0
  542. <6>[ 1.296521] init: command 'mkdir' r=0
  543. <6>[ 1.296580] init: command 'mkdir' r=0
  544. <6>[ 1.296641] init: command 'mkdir' r=0
  545. <6>[ 1.297663] init: command 'mkdir' r=0
  546. <6>[ 1.297697] init: command 'chmod' r=-2
  547. <6>[ 1.297757] init: command 'mkdir' r=0
  548. <6>[ 1.297785] init: command 'chown' r=0
  549. <6>[ 1.297840] init: command 'mkdir' r=0
  550. <6>[ 1.297918] init: command 'chmod' r=0
  551. <6>[ 1.298927] init: command 'chmod' r=0
  552. <6>[ 1.299005] init: command 'chmod' r=0
  553. <6>[ 1.299051] init: command 'chmod' r=0
  554. <6>[ 1.299093] init: command 'chmod' r=0
  555. <6>[ 1.299161] init: command 'mkdir' r=0
  556. <6>[ 1.300204] init: command 'mkdir' r=0
  557. <6>[ 1.300284] init: command 'mkdir' r=0
  558. <6>[ 1.300345] init: command 'mkdir' r=0
  559. <6>[ 1.300401] init: command 'mkdir' r=0
  560. <6>[ 1.300455] init: command 'mkdir' r=0
  561. <6>[ 1.300515] init: command 'mkdir' r=0
  562. <6>[ 1.300570] init: command 'mkdir' r=0
  563. <6>[ 1.300632] init: command 'mkdir' r=0
  564. <6>[ 1.300658] init: command 'chown' r=0
  565. <6>[ 1.300683] init: command 'chmod' r=0
  566. <6>[ 1.300735] init: command 'mkdir' r=0
  567. <6>[ 1.300791] init: command 'mkdir' r=0
  568. <6>[ 1.300959] init: command 'chown' r=0
  569. <6>[ 1.301027] init: command 'chmod' r=0
  570. <6>[ 1.301087] init: command 'chown' r=0
  571. <6>[ 1.301130] init: command 'chmod' r=0
  572. <6>[ 1.301148] init: processing action 0x78190 (property_service_init)
  573. <6>[ 1.306462] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
  574. <6>[ 1.306502] init: command 'property_service_init' r=0
  575. <6>[ 1.306530] init: processing action 0x781d8 (signal_init)
  576. <6>[ 1.306604] init: command 'signal_init' r=0
  577. <6>[ 1.306622] init: processing action 0x78220 (check_startup)
  578. <6>[ 1.306667] init: command 'check_startup' r=0
  579. <6>[ 1.306695] init: processing action 0x72a80 (boot)
  580. <6>[ 1.307824] init: command 'chown' r=0
  581. <6>[ 1.307871] init: command 'chmod' r=0
  582. <6>[ 1.308422] init: command 'ifup' r=0
  583. <6>[ 1.308549] init: command 'hostname' r=0
  584. <6>[ 1.308602] init: command 'domainname' r=0
  585. <6>[ 1.308626] init: command 'setrlimit' r=0
  586. <6>[ 1.308690] init: command 'write' r=0
  587. <6>[ 1.308744] init: command 'write' r=0
  588. <6>[ 1.308857] init: command 'chown' r=0
  589. <6>[ 1.308896] init: command 'chmod' r=0
  590. <6>[ 1.308932] init: command 'chown' r=0
  591. <6>[ 1.308962] init: command 'chmod' r=0
  592. <4>[ 1.309045] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  593. <6>[ 1.309064] init: command 'write' r=0
  594. <6>[ 1.309119] init: command 'write' r=0
  595. <6>[ 1.309165] init: command 'write' r=0
  596. <6>[ 1.309194] init: command 'chown' r=-2
  597. <6>[ 1.309218] init: command 'chown' r=-2
  598. <6>[ 1.309242] init: command 'chown' r=-2
  599. <6>[ 1.309264] init: command 'chown' r=-2
  600. <6>[ 1.309285] init: command 'chown' r=-2
  601. <6>[ 1.309323] init: command 'chown' r=0
  602. <6>[ 1.309356] init: command 'chown' r=0
  603. <6>[ 1.309401] init: command 'chown' r=0
  604. <6>[ 1.309426] init: command 'chmod' r=0
  605. <6>[ 1.309450] init: command 'chmod' r=0
  606. <6>[ 1.309472] init: command 'chmod' r=0
  607. <6>[ 1.309521] init: command 'chown' r=0
  608. <6>[ 1.309548] init: command 'chmod' r=0
  609. <6>[ 1.309589] init: command 'chown' r=-2
  610. <6>[ 1.309623] init: command 'chown' r=-2
  611. <6>[ 1.309649] init: command 'chown' r=-2
  612. <6>[ 1.309673] init: command 'chown' r=-2
  613. <6>[ 1.309697] init: command 'chown' r=-2
  614. <6>[ 1.309721] init: command 'chown' r=-2
  615. <6>[ 1.309744] init: command 'chown' r=-2
  616. <6>[ 1.309767] init: command 'chown' r=-2
  617. <6>[ 1.309791] init: command 'chown' r=-2
  618. <6>[ 1.309814] init: command 'chown' r=-2
  619. <6>[ 1.309837] init: command 'chown' r=-2
  620. <6>[ 1.309864] init: command 'chown' r=-2
  621. <6>[ 1.309887] init: command 'chown' r=-2
  622. <6>[ 1.309910] init: command 'chown' r=-2
  623. <6>[ 1.309936] init: command 'chown' r=-2
  624. <6>[ 1.309960] init: command 'chown' r=-2
  625. <6>[ 1.309983] init: command 'chown' r=-2
  626. <6>[ 1.310127] init: command 'chown' r=-2
  627. <6>[ 1.310178] init: command 'chown' r=-2
  628. <6>[ 1.310234] init: command 'chown' r=0
  629. <6>[ 1.310269] init: command 'chown' r=0
  630. <6>[ 1.310301] init: command 'chown' r=0
  631. <6>[ 1.310336] init: command 'chown' r=0
  632. <6>[ 1.310368] init: command 'chown' r=0
  633. <6>[ 1.310400] init: command 'chown' r=0
  634. <6>[ 1.310456] init: command 'chown' r=0
  635. <6>[ 1.310522] init: command 'setprop' r=0
  636. <6>[ 1.310571] init: command 'setprop' r=0
  637. <6>[ 1.310612] init: command 'setprop' r=0
  638. <6>[ 1.310655] init: command 'setprop' r=0
  639. <6>[ 1.310695] init: command 'setprop' r=0
  640. <6>[ 1.310736] init: command 'setprop' r=0
  641. <6>[ 1.310778] init: command 'setprop' r=0
  642. <6>[ 1.310803] init: command 'setprop' r=0
  643. <6>[ 1.310830] init: command 'setprop' r=0
  644. <3>[ 1.310864] init: service 'console' requires console
  645. <5>[ 1.310955] init: starting 'servicemanager'
  646. <5>[ 1.311422] init: starting 'vold'
  647. <6>[ 1.311736] init: command 'class_start' r=0
  648. <5>[ 1.311848] init: starting 'netd'
  649. <5>[ 1.312192] init: starting 'debuggerd'
  650. <5>[ 1.312530] init: starting 'surfaceflinger'
  651. <5>[ 1.312878] init: starting 'zygote'
  652. <5>[ 1.313246] init: starting 'drm'
  653. <5>[ 1.313565] init: starting 'media'
  654. <5>[ 1.313873] init: starting 'dbus'
  655. <5>[ 1.314204] init: starting 'installd'
  656. <3>[ 1.314539] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  657. <5>[ 1.314607] init: starting 'keystore'
  658. <5>[ 1.314968] init: starting 'u3gmonitor'
  659. <5>[ 1.315328] init: starting 'ril-daemon'
  660. <6>[ 1.315617] init: command 'class_start' r=0
  661. <6>[ 1.315703] init: processing action 0x77d50 (boot)
  662. <6>[ 1.317430] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
  663. <6>[ 1.319292] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
  664. <6>[ 1.319381] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
  665. <6>[ 1.324375] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
  666. <6>[ 1.325375] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
  667. <6>[ 1.327730] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
  668. <6>[ 1.328803] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
  669. <6>[ 1.329278] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
  670. <6>[ 1.329378] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
  671. <4>[ 1.367517] [GSL1680] Enter gsl_ts_init
  672. <4>[ 1.367535] ctp_fetch_sysconfig_para.
  673. <4>[ 1.367560] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x40, dirty_addr_buf: 0x40. dirty_addr_buf[1]: 0xfffe
  674. <4>[ 1.367574] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
  675. <6>[ 1.367584] ctp_fetch_sysconfig_para: screen_max_x = 800.
  676. <6>[ 1.367594] ctp_fetch_sysconfig_para: screen_max_y = 480.
  677. <6>[ 1.367604] ctp_fetch_sysconfig_para: revert_x_flag = 0.
  678. <6>[ 1.367762] ctp_fetch_sysconfig_para: revert_y_flag = 1.
  679. <6>[ 1.367773] ctp_fetch_sysconfig_para: exchange_x_y_flag = 1.
  680. <4>[ 1.367782] gsl_ts_init: after fetch_sysconfig_para: normal_i2c: 0x40. normal_i2c[1]: 0xfffe
  681. <6>[ 1.367976] ctp_detect: Detected chip gsl1680 at adapter 1, address 0x40
  682. <4>[ 1.368128] [GSL1680] Enter gsl_ts_probe
  683. <6>[ 1.368567] input: gsl1680 as /devices/platform/sun5i-i2c.1/i2c-1/1-0040/input/input2
  684. <6>[ 1.369176] ctp_set_irq_mode: config gpio to int mode.
  685. <6>[ 1.369206] ctp_set_irq_mode, 371: gpio_int_info, port = 7, port_num = 11.
  686. <6>[ 1.369214] INTERRUPT CONFIG
  687. <6>[ 1.369757] I read reg 0xf0 is 0
  688. <6>[ 1.380414] I write reg 0xf0 0x12
  689. <6>[ 1.404876] I read reg 0xf0 is 0x12
  690. <4>[ 1.480074] =============gsl_load_fw start==============
  691. <4>[ 1.531477] [mmc]: mmc 0 power on !!
  692. <4>[ 1.570901] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  693. <4>[ 1.571743] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  694. <4>[ 1.578031] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  695. <4>[ 1.578854] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  696. <4>[ 1.579671] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  697. <4>[ 1.580493] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  698. <6>[ 1.621315] mmc0: new high speed SDHC card at address 0007
  699. <6>[ 1.622182] mmcblk0: mmc0:0007 SD32G 29.3 GiB
  700. <6>[ 1.624321] mmcblk0: p1
  701. <4>[ 2.080114]
  702. <4>[ 2.080130]
  703. <4>[ 2.080133] insmod_device_driver
  704. <4>[ 2.080137]
  705. <4>[ 2.080158] [sw_udc]: sw_usb_device_enable start
  706. <4>[ 2.080167] [sw_udc]: usb_vbase = 0xf1c13000
  707. <4>[ 2.080176] [sw_udc]: sram_vbase = 0xf1c00000
  708. <4>[ 2.080227] [sw_udc]: open_usb_clock
  709. <4>[ 2.171234] [sw_udc]: usbd_stop_work
  710. <4>[ 2.171303] [sw_udc]: sw_usb_device_enable end
  711. <4>[ 2.436723] =============gsl_load_fw end==============
  712. <4>[ 2.436748] =============gsl_load_cfg start==============
  713. <4>[ 2.485990] =============gsl_load_cfg end==============
  714. <4>[ 2.910132] [GSL1680] End gsl_ts_probe
  715. <6>[ 2.910416] init: command 'insmod' r=0
  716. <6>[ 2.910573] init: waitpid returned pid 81, status = 00000000
  717. <5>[ 2.910591] init: process 'surfaceflinger', pid 81 exited
  718. <5>[ 2.910613] init: process 'surfaceflinger' killing any children in process group
  719. <5>[ 2.910649] init: service 'zygote' is being killed
  720. <5>[ 2.910758] init: starting 'zygote'
  721. <6>[ 2.912734] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
  722. <4>[ 2.958783] UMP<2>: Inserting UMP device driver. Compiled: Oct 15 2012, time: 20:14:38
  723. <4>[ 2.961301] UMP<2>: Using OS memory backend, allocation limit: 134217728
  724. <4>[ 2.961326] UMP: UMP device driver loaded
  725. <6>[ 2.961561] init: command 'insmod' r=0
  726. <6>[ 2.962352] init: waitpid returned pid 82, status = 00000009
  727. <3>[ 2.962377] init: untracked pid 82 exited
  728. <4>[ 3.130488] Mali: Mali device driver loaded
  729. <6>[ 3.131075] init: command 'insmod' r=0
  730. <4>[ 3.148121] [cedar dev]: install start!!!
  731. <4>[ 3.150164] [cedar dev]: install end!!!
  732. <6>[ 3.150330] init: command 'insmod' r=0
  733. <6>[ 3.170649] init: command 'insmod' r=0
  734. <6>[ 3.205908] init: command 'insmod' r=0
  735. <6>[ 3.246021] init: command 'insmod' r=0
  736. <6>[ 3.278812] [CSI]Welcome to CSI driver
  737. <6>[ 3.278831] [CSI]csi_init
  738. <6>[ 3.280493] [CSI]registered sub device,input_num = 0
  739. <6>[ 3.280544] [CSI]power on and power off camera!
  740. <6>[ 3.465977] [CSI]V4L2 device registered as video0
  741. <6>[ 3.466266] init: command 'insmod' r=0
  742. <6>[ 3.502505] usbcore: registered new interface driver asix
  743. <6>[ 3.502691] init: command 'insmod' r=0
  744. <6>[ 3.533144] usbcore: registered new interface driver qf9700
  745. <6>[ 3.533311] init: command 'insmod' r=0
  746. <6>[ 3.560865] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  747. <6>[ 3.561018] init: command 'insmod' r=0
  748. <4>[ 4.723481] sw_usb_enable_hcd: usbc_num = 1
  749. <4>[ 4.723506] [sw-ehci1]: sw_usb_enable_ehci
  750. <4>[ 4.723521] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a957c
  751. <4>[ 4.723541] [sw-ehci1]: open clock
  752. <4>[ 4.746068] usb_passby en=1,passly=0
  753. <4>[ 4.746082] hci_port_configure en=1,config_cnt=0
  754. <4>[ 4.746093] [sw-ehci1]: Set USB Power ON
  755. <6>[ 4.747247] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  756. <6>[ 4.747293] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  757. <6>[ 4.747417] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  758. <6>[ 4.760055] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  759. <4>[ 4.760074] ehci_irq: port change detect
  760. <6>[ 4.762353] hub 2-0:1.0: USB hub found
  761. <6>[ 4.762391] hub 2-0:1.0: 1 port detected
  762. <4>[ 4.762895] [sw-ohci1]: sw_usb_enable_ohci
  763. <4>[ 4.762911] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a9694
  764. <4>[ 4.762926] [sw-ohci1]: open clock
  765. <4>[ 4.785341] hci_port_configure en=1,config_cnt=1
  766. <4>[ 4.785385] usb_passby en=1,passly=1
  767. <6>[ 4.785399] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  768. <6>[ 4.785440] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  769. <6>[ 4.785491] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
  770. <6>[ 4.845750] hub 3-0:1.0: USB hub found
  771. <6>[ 4.845788] hub 3-0:1.0: 1 port detected
  772. <4>[ 4.846293] rtw driver version=v4.1.0_3945.20120502
  773. <4>[ 4.846305] Build at: Sep 28 2012 17:14:13
  774. <4>[ 4.846313] ##########rtw_suspend_lock_init ###########
  775. <6>[ 4.846637] usbcore: registered new interface driver rtl8188eu
  776. <6>[ 4.850995] init: command 'insmod' r=0
  777. <4>[ 4.869061] mc32x0: init
  778. <4>[ 4.869239] ========gsensor_fetch_sysconfig_para===================
  779. <4>[ 4.869272] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x4c, dirty_addr_buf: 0x4c. dirty_addr_buf[1]: 0xfffe
  780. <4>[ 4.869288] gsensor_fetch_sysconfig_para: twi_id is 1.
  781. <4>[ 4.869301] err: gpio count < =0 ,gpio_count is: 0
  782. <4>[ 4.869311] mc32x0_init: after fetch_sysconfig_para: normal_i2c: 0x4c. normal_i2c[1]: 0xfffe
  783. <6>[ 4.869622] gsensor_detect: Detected chip mc32x0 at adapter 1, address 0x4c
  784. <4>[ 4.930868] offser gain = 450 474 362 512 -224 240======================
  785. <4>[ 4.930880]
  786. <4>[ 4.930883]
  787. <6>[ 4.933872] input: mc32x0 as /devices/virtual/input/input3
  788. <4>[ 4.934326] mc32x0 probe ok
  789. <6>[ 4.934523] init: command 'insmod' r=0
  790. <4>[ 4.959485] dmard06: init
  791. <4>[ 4.959506] ========gsensor_fetch_sysconfig_para===================
  792. <4>[ 4.959537] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x1c, dirty_addr_buf: 0x1c. dirty_addr_buf[1]: 0xfffe
  793. <4>[ 4.959554] gsensor_fetch_sysconfig_para: twi_id is 1.
  794. <4>[ 4.959567] err: gpio count < =0 ,gpio_count is: 0
  795. <4>[ 4.959576] dmard06_init: after fetch_sysconfig_para: normal_i2c: 0x1c. normal_i2c[1]: 0xfffe
  796. <6>[ 4.960203] gsensor_detect: Detected chip dmard06 at adapter 1, address 0x1c
  797. <4>[ 4.960930] [i2c1] incomplete xfer (0x20)
  798. <4>[ 4.961132] [i2c1] incomplete xfer (0x48)
  799. <6>[ 4.961141] i2c Read SW_RESET = 0
  800. <4>[ 4.961343] [i2c1] incomplete xfer (0x20)
  801. <4>[ 4.961532] [i2c1] incomplete xfer (0x48)
  802. <6>[ 4.961540] i2c Read WHO_AM_I = 0
  803. <4>[ 4.961546] dmard06 gsensor I2C err = 0!
  804. <4>[ 4.961584] dmard06 probe failed
  805. <4>[ 4.961603] dmard06: probe of 1-001c failed with error -1
  806. <6>[ 4.961909] init: command 'insmod' r=0
  807. <6>[ 4.961983] init: processing action 0x78268 (queue_propety_triggers)
  808. <6>[ 4.962065] init: command 'queue_propety_triggers' r=0
  809. <6>[ 4.962085] init: processing action 0x734b0 (nonencrypted)
  810. <6>[ 4.962105] init: command 'class_start' r=0
  811. <6>[ 4.962123] init: processing action 0x73bd8 (property:persist.sys.usb.config=*)
  812. <6>[ 4.962188] init: command 'setprop' r=0
  813. <6>[ 4.962210] init: processing action 0x73da8 (property:ro.debuggable=1)
  814. <3>[ 4.962227] init: service 'console' requires console
  815. <6>[ 4.962238] init: command 'start' r=0
  816. <6>[ 4.962253] init: processing action 0x76ef0 (property:sys.usb.config=mass_storage,adb)
  817. <3>[ 4.962503] android_usb: already disabled
  818. <6>[ 4.962540] init: command 'write' r=0
  819. <6>[ 4.962639] init: command 'write' r=0
  820. <6>[ 4.962710] init: command 'write' r=0
  821. <6>[ 4.962964] init: command 'write' r=0
  822. <4>[ 4.963063] ep_matches, wrn: endpoint already claimed, ep(0xc08e2468, 0xdfb3dc00, ep1-bulk)
  823. <6>[ 4.963078] adb_bind_config
  824. <4>[ 4.963087] ep_matches, wrn: endpoint already claimed, ep(0xc08e2468, 0xdfb3dc00, ep1-bulk)
  825. <4>[ 4.963098] ep_matches, wrn: endpoint already claimed, ep(0xc08e24a8, 0xdfb3dc00, ep2-bulk)
  826. <4>[ 4.963111] ep_matches, wrn: endpoint already claimed, ep(0xc08e2468, 0xdfb3dc00, ep1-bulk)
  827. <4>[ 4.963121] ep_matches, wrn: endpoint already claimed, ep(0xc08e24a8, 0xdfb3dc00, ep2-bulk)
  828. <4>[ 4.963131] ep_matches, wrn: endpoint already claimed, ep(0xc08e24e8, 0xdfbe3b80, ep3-bulk)
  829. <4>[ 4.963143] [sw_udc]: alloc request: ep(0xc08e2528, ep4-bulk, 512), req(0xde040740)
  830. <4>[ 4.963156] [sw_udc]: alloc request: ep(0xc08e24e8, ep3-bulk, 512), req(0xde040780)
  831. <4>[ 4.963169] [sw_udc]: alloc request: ep(0xc08e24e8, ep3-bulk, 512), req(0xde0407c0)
  832. <4>[ 4.963181] [sw_udc]: alloc request: ep(0xc08e24e8, ep3-bulk, 512), req(0xde040800)
  833. <4>[ 4.963193] [sw_udc]: alloc request: ep(0xc08e24e8, ep3-bulk, 512), req(0xde040840)
  834. <4>[ 4.963208] [sw_udc]: sw_udc_pullup, is_on = 1
  835. <4>[ 4.963218] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
  836. <4>[ 4.963229] [sw_udc]: usbd_start_work
  837. <6>[ 4.963253] init: command 'write' r=0
  838. <5>[ 4.963296] init: starting 'adbd'
  839. <6>[ 4.963739] init: command 'start' r=0
  840. <6>[ 4.963989] init: command 'setprop' r=0
  841. <6>[ 4.966346] adb_open
  842. <4>[ 5.018686] [sw_udc]: IRQ: suspend
  843. <4>[ 5.018712] [sw_udc]: ERR: usb speed is unkown
  844. <6>[ 5.080163] usb 2-1: new high speed USB device number 2 using sw-ehci
  845. <4>[ 5.128225] [sw_udc]: IRQ: reset
  846. <4>[ 5.128254] [sw_udc]: irq: reset happen, throw away all urb
  847. <4>[ 5.167721] [sw_udc]:
  848. <4>[ 5.167743] +++++++++++++++++++++++++++++++++++++
  849. <4>[ 5.167750] [sw_udc]: usb enter high speed.
  850. <4>[ 5.167757] [sw_udc]:
  851. <4>[ 5.167762] +++++++++++++++++++++++++++++++++++++
  852. <6>[ 5.167922] android_work: sent uevent USB_STATE=CONNECTED
  853. <4>[ 5.172546] [sw_udc]: IRQ: reset
  854. <4>[ 5.172574] [sw_udc]: irq: reset happen, throw away all urb
  855. <4>[ 5.207778] [sw_udc]: Set address 4
  856. <6>[ 5.236095] android_usb gadget: high speed config #1: android
  857. <4>[ 5.236152] [sw_udc]: ep enable: ep3(0xc08e24e8, ep3-bulk, 128, 512)
  858. <4>[ 5.236174] [sw_udc]: ep enable: ep4(0xc08e2528, ep4-bulk, 0, 512)
  859. <4>[ 5.236245] [sw_udc]: ep enable: ep1(0xc08e2468, ep1-bulk, 128, 512)
  860. <4>[ 5.236262] [sw_udc]: ep enable: ep2(0xc08e24a8, ep2-bulk, 0, 512)
  861. <4>[ 5.236281] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xdf248580)
  862. <4>[ 5.236294] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xdf2485c0)
  863. <4>[ 5.236306] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xdf248600)
  864. <4>[ 5.236318] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xdf248640)
  865. <6>[ 5.236444] android_work: sent uevent USB_STATE=CONFIGURED
  866. <4>[ 5.934402] mcube_read_cali_file 675
  867. <6>[ 5.934420] initKernelEnv
  868. <4>[ 5.954463] mcube_read_cali_file 675
  869. <6>[ 5.954480] initKernelEnv
  870. <4>[ 5.974546] mcube_read_cali_file 675
  871. <6>[ 5.974564] initKernelEnv
  872. <4>[ 5.994534] mcube_read_cali_file 675
  873. <6>[ 5.994550] initKernelEnv
  874. <4>[ 6.014552] mcube_read_cali_file 675
  875. <6>[ 6.014566] initKernelEnv
  876. <4>[ 6.034550] mcube_read_cali_file 675
  877. <6>[ 6.034560] initKernelEnv
  878. <4>[ 6.054579] mcube_read_cali_file 675
  879. <6>[ 6.054591] initKernelEnv
  880. <4>[ 6.074664] mcube_read_cali_file 675
  881. <6>[ 6.074684] initKernelEnv
  882. <4>[ 6.094706] mcube_read_cali_file 675
  883. <6>[ 6.094723] initKernelEnv
  884. <4>[ 6.114738] mcube_read_cali_file 675
  885. <6>[ 6.114757] initKernelEnv
  886. <4>[ 6.134759] mcube_read_cali_file 675
  887. <6>[ 6.134774] initKernelEnv
  888. <4>[ 6.154750] mcube_read_cali_file 675
  889. <6>[ 6.154759] initKernelEnv
  890. <4>[ 6.174851] mcube_read_cali_file 675
  891. <6>[ 6.174868] initKernelEnv
  892. <4>[ 6.194837] mcube_read_cali_file 675
  893. <6>[ 6.194854] initKernelEnv
  894. <4>[ 6.214843] mcube_read_cali_file 675
  895. <6>[ 6.214855] initKernelEnv
  896. <4>[ 6.234860] mcube_read_cali_file 675
  897. <6>[ 6.234868] initKernelEnv
  898. <4>[ 6.254879] mcube_read_cali_file 675
  899. <6>[ 6.254887] initKernelEnv
  900. <4>[ 6.274888] mcube_read_cali_file 675
  901. <6>[ 6.274898] initKernelEnv
  902. <4>[ 6.294916] mcube_read_cali_file 675
  903. <6>[ 6.294927] initKernelEnv
  904. <4>[ 6.314927] mcube_read_cali_file 675
  905. <6>[ 6.314938] initKernelEnv
  906. <4>[ 6.334943] mcube_read_cali_file 675
  907. <6>[ 6.334956] initKernelEnv
  908. <4>[ 6.354961] mcube_read_cali_file 675
  909. <6>[ 6.354969] initKernelEnv
  910. <4>[ 6.374997] mcube_read_cali_file 675
  911. <6>[ 6.375009] initKernelEnv
  912. <4>[ 6.395029] mcube_read_cali_file 675
  913. <6>[ 6.395046] initKernelEnv
  914. <4>[ 6.415097] mcube_read_cali_file 675
  915. <6>[ 6.415117] initKernelEnv
  916. <4>[ 6.435111] mcube_read_cali_file 675
  917. <6>[ 6.435131] initKernelEnv
  918. <4>[ 6.455195] mcube_read_cali_file 675
  919. <6>[ 6.455213] initKernelEnv
  920. <4>[ 6.475226] mcube_read_cali_file 675
  921. <6>[ 6.475243] initKernelEnv
  922. <4>[ 6.495275] mcube_read_cali_file 675
  923. <6>[ 6.495292] initKernelEnv
  924. <4>[ 6.515346] mcube_read_cali_file 675
  925. <6>[ 6.515363] initKernelEnv
  926. <5>[ 6.966194] init: starting 'surfaceflinger'
  927. <4>[ 7.240128] set usbcur 0 mA
  928. <4>[ 7.240417] set usbvol 4000 mV
  929. <4>[ 7.290539] UMP<2>: New session opened
  930. <6>[ 7.303468] init: waitpid returned pid 136, status = 00000000
  931. <3>[ 7.303500] init: untracked pid 136 exited
  932. <5>[ 7.391014] init: starting 'bootanim'
  933. <4>[ 7.672704] UMP<2>: New session opened
  934. <6>[ 10.897116] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  935. <4>[ 13.188215] PHY_PageRead : 834 : ecc limit
  936. <6>[ 15.133175] request_suspend_state: wakeup (3->0) at 15133145249 (2013-08-22 15:09:54.691390100 UTC)
  937. <6>[ 15.647555] acc_open
  938. <6>[ 15.647595] acc_release
  939. <4>[ 16.641480] sw_usb_enable_hcd: usbc_num = 1
  940. <4>[ 16.641508] WRN:L877(drivers/usb/host/ehci_sun5i.c):ERR: sw_ehci is already enable, can not enable again
  941. <4>[ 16.641525] WRN:L764(drivers/usb/host/ohci_sun5i.c):ERR: sw_ohci is already enable, can not enable again
  942. <4>[ 16.641537] rtw driver version=v3.4.2_3727.20120404
  943. <4>[ 16.641544] Build at: Sep 15 2012 11:22:21
  944. <4>[ 16.641553] ##########rtw_suspend_lock_init ###########
  945. <6>[ 16.646141] usbcore: registered new interface driver rtl8192cu
  946. <4>[ 17.128406] UMP<2>: New session opened
  947. <4>[ 21.096444] +rtw_drv_halt
  948. <4>[ 21.096473] ##########rtw_suspend_lock_uninit###########
  949. <6>[ 21.096485] usbcore: deregistering interface driver rtl8192cu
  950. <4>[ 21.096629] -rtw_drv_halt
  951. <4>[ 21.096636] sw_usb_disable_hcd: usbc_num = 1
  952. <4>[ 21.096646] [sw-ehci1]: sw_usb_disable_ehci
  953. <4>[ 21.096659] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a957c
  954. <6>[ 21.096673] sw-ehci sw-ehci.1: remove, state 1
  955. <6>[ 21.096705] usb usb2: USB disconnect, device number 1
  956. <6>[ 21.096714] usb 2-1: USB disconnect, device number 2
  957. <6>[ 21.098622] sw-ehci sw-ehci.1: USB bus 2 deregistered
  958. <4>[ 21.098645] hci_port_configure en=0,config_cnt=2
  959. <4>[ 21.098655] usb_passby en=0,passly=2
  960. <4>[ 21.098662] [sw-ehci1]: close clock
  961. <4>[ 21.098706] [sw-ohci1]: sw_usb_disable_ohci
  962. <4>[ 21.098718] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a9694
  963. <6>[ 21.098728] sw-ohci sw-ohci.1: remove, state 1
  964. <6>[ 21.098756] usb usb3: USB disconnect, device number 1
  965. <6>[ 21.099159] sw-ohci sw-ohci.1: USB bus 3 deregistered
  966. <4>[ 21.099181] [sw-ohci1]: Set USB Power OFF
  967. <4>[ 21.130941] usb_passby en=0,passly=1
  968. <4>[ 21.130963] hci_port_configure en=0,config_cnt=1
  969. <4>[ 21.130974] [sw-ohci1]: close clock
  970. <4>[ 23.218250] UMP<2>: New session opened
  971. <6>[ 24.301473] init: processing action 0x75400 (property:sys.boot_completed=1)
  972. <5>[ 24.301555] init: starting 'preinstall'
  973. <6>[ 24.301993] init: command 'start' r=0
  974. <6>[ 24.376086] init: waitpid returned pid 464, status = 00000000
  975. <5>[ 24.376116] init: process 'preinstall', pid 464 exited
  976. <4>[ 24.588248] UMP<2>: New session opened
  977. <5>[ 24.959917] init: service 'bootanim' is being killed
  978. <4>[ 24.962573] UMP<2>: Session closed
  979. <6>[ 24.969722] init: waitpid returned pid 144, status = 00000009
  980. <5>[ 24.969749] init: process 'bootanim', pid 144 exited
  981. <4>[ 84.462447] [pm]valid
  982. <6>[ 84.462509] request_suspend_state: sleep (0->3) at 84462497267 (2013-08-22 15:11:04.020742701 UTC)
  983. <4>[ 84.500840] [GSL1680] Enter gsl_ts_early_suspend
  984. <4>[ 84.620231] [AXP]======early suspend=======
  985. <4>[ 84.620983] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  986. <4>[ 84.620993] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  987. <4>[ 84.621003] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  988. <6>[ 84.621988] ==display early suspend enter
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement