#!KAMAILIO
#
# Kamailio (OpenSER) SIP Server v4.1 - default configuration script
#     - web: http://www.kamailio.org
#     - git: http://sip-router.org
#
# Direct your questions about this file to: <sr-users@lists.sip-router.org>
#
# Refer to the Core CookBook at http://www.kamailio.org/wiki/
# for an explanation of possible statements, functions and parameters.
#
# Several features can be enabled using '#!define WITH_FEATURE' directives:
#
# *** To run in debug mode:
#     - define WITH_DEBUG
#
# *** To enable mysql:
#     - define WITH_MYSQL
#
# *** To enable authentication execute:
#     - enable mysql
#     - define WITH_AUTH
#     - add users using 'kamctl'
#
# *** To enable IP authentication execute:
#     - enable mysql
#     - enable authentication
#     - define WITH_IPAUTH
#     - add IP addresses with group id '1' to 'address' table
#
# *** To enable persistent user location execute:
#     - enable mysql
#     - define WITH_USRLOCDB
#
# *** To enable presence server execute:
#     - enable mysql
#     - define WITH_PRESENCE
#
# *** To enable nat traversal execute:
#     - define WITH_NAT
#     - install RTPProxy: http://www.rtpproxy.org
#     - start RTPProxy:
#        rtpproxy -l _your_public_ip_ -s udp:localhost:7722
#
# *** To enable PSTN gateway routing execute:
#     - define WITH_PSTN
#     - set the value of pstn.gw_ip
#     - check route[PSTN] for regexp routing condition
#
# *** To enable database aliases lookup execute:
#     - enable mysql
#     - define WITH_ALIASDB
#
# *** To enable speed dial lookup execute:
#     - enable mysql
#     - define WITH_SPEEDDIAL
#
# *** To enable multi-domain support execute:
#     - enable mysql
#     - define WITH_MULTIDOMAIN
#
# *** To enable TLS support execute:
#     - adjust CFGDIR/tls.cfg as needed
#     - define WITH_TLS
#
# *** To enable XMLRPC support execute:
#     - define WITH_XMLRPC
#     - adjust route[XMLRPC] for access policy
#
# *** To enable anti-flood detection execute:
#     - adjust pike and htable=>ipban settings as needed (default is
#       block if more than 16 requests in 2 seconds and ban for 300 seconds)
#     - define WITH_ANTIFLOOD
#
# *** To block 3XX redirect replies execute:
#     - define WITH_BLOCK3XX
#
# *** To enable VoiceMail routing execute:
#     - define WITH_VOICEMAIL
#     - set the value of voicemail.srv_ip
#     - adjust the value of voicemail.srv_port
#
# *** To enhance accounting execute:
#     - enable mysql
#     - define WITH_ACCDB
#     - add following columns to database
#!ifdef ACCDB_COMMENT
  ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default '';
  ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default '';
  ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
#!endif

#	#!define WITH_MYSQL
#	#!define WITH_AUTH
#	#!define WITH_USRLOCDB
	#!define WITH_NAT
	#!define WITH_ASTERISK
#	#!define WITH_DEBUG

####### Include Local Config If Exists #########
import_file "kamailio-local.cfg"

####### Defined Values #########

# *** Value defines - IDs used later in config
#!ifdef WITH_MYSQL
# - database URL - used to connect to database server by modules such
#       as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL
#!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio"
#!endif
#!endif
#!ifdef WITH_MULTIDOMAIN
# - the value for 'use_domain' parameters
#!define MULTIDOMAIN 1
#!else
#!define MULTIDOMAIN 0
#!endif

# - flags
#   FLT_ - per transaction (message) flags
#	FLB_ - per branch flags
#!define FLT_ACC 1
#!define FLT_ACCMISSED 2
#!define FLT_ACCFAILED 3
#!define FLT_NATS 5

#!define FLB_NATB 6
#!define FLB_NATSIPPING 7

####### Global Parameters #########

### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=4
log_stderror=yes
#!else
debug=3
log_stderror=no
#!endif

memdbg=5
memlog=5

log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes

/* uncomment the next line to disable the auto discovery of local aliases
   based on reverse DNS on IPs (default on) */
#auto_aliases=no

/* add local domain aliases */
#alias="sip.mydomain.com"

/* uncomment and configure the following line if you want Kamailio to
   bind on a specific interface/port/proto (default bind on all available) */

#listen=udp:50.0.0.1:5060 advertise 194.190.8.171:5060
listen=udp:194.190.8.171:5060 advertise 50.0.0.1:5060

/* port to listen to
 * - can be specified more than once if needed to listen on many ports */
port=5060

mhomed=1

#!ifdef WITH_TLS
enable_tls=yes
#!endif

# life time of TCP connection when there is no traffic
# - a bit higher than registration expires to cope with UA behind NAT
tcp_connection_lifetime=3605

####### Custom Parameters #########

# These parameters can be modified runtime via RPC interface
# - see the documentation of 'cfg_rpc' module.
#
# Format: group.id = value 'desc' description
# Access: $sel(cfg_get.group.id) or @cfg_get.group.id
#

#!ifdef WITH_PSTN
# PSTN GW Routing
#
# - pstn.gw_ip: valid IP or hostname as string value, example:
# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
#
# - by default is empty to avoid misrouting
#pstn.gw_ip = "" desc "PSTN GW Address"
#pstn.gw_port = "" desc "PSTN GW Port"
#!endif

#!ifdef WITH_VOICEMAIL
# VoiceMail Routing on offline, busy or no answer
#
# - by default Voicemail server IP is empty to avoid misrouting
#voicemail.srv_ip = "" desc "VoiceMail IP Address"
#voicemail.srv_port = "5060" desc "VoiceMail Port"
#!endif

#!ifdef WITH_ASTERISK
asterisk.bindip = "50.0.0.10" desc "Asterisk IP Address"
asterisk.bindport = "5060" desc "Asterisk Port"
kamailio.bindip = "50.0.0.1" desc "Kamailio IP Address"
kamailio.bindport = "5060" desc "Kamailio Port"
#!endif

####### Modules Section ########

# set paths to location of modules (to sources or installation folders)
#!ifdef WITH_SRCPATH
mpath="modules/"
#!else
mpath="/usr/lib64/kamailio/modules/"
#!endif

#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif

loadmodule "mi_fifo.so"
loadmodule "kex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "mi_rpc.so"
loadmodule "acc.so"

#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif

#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"
#!endif

#!ifdef WITH_SPEEDDIAL
loadmodule "speeddial.so"
#!endif

#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"
#!endif

#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif

#!ifdef WITH_NAT
loadmodule "nathelper.so"
loadmodule "rtpproxy.so"
#!endif

#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif

#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif

#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"
#!endif

#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif

#!ifdef WITH_ASTERISK
loadmodule "uac.so"
#!endif


#loadmodule "topoh.so"
#modparam("topoh", "mask_key", "balalayka")
#modparam("topoh", "mask_ip", "50.0.0.1")

# ----------------- setting module-specific parameters ---------------


# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")


# ----- tm params -----
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)


# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
#!ifdef WITH_ASTERISK
modparam("rr", "append_fromtag", 1)
#!else
modparam("rr", "append_fromtag", 0)
#!endif


# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# max value for expires of registrations
modparam("registrar", "max_expires", 3600)
# set it to 1 to enable GRUU
modparam("registrar", "gruu_enabled", 0)


# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
	"src_user=$fU;src_domain=$fd;src_ip=$si;"
	"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",
	"src_user=$fU;src_domain=$fd;src_ip=$si;"
	"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif


# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
#!endif


# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", MULTIDOMAIN)

# ----- permissions params -----
#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)
#!endif

#!endif


# ----- alias_db params -----
#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif


# ----- speeddial params -----
#!ifdef WITH_SPEEDDIAL
modparam("speeddial", "db_url", DBURL)
modparam("speeddial", "use_domain", MULTIDOMAIN)
#!endif


# ----- domain params -----
#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL)
# register callback to match myself condition with domains list
modparam("domain", "register_myself", 1)
#!endif


#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)

# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif


#!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")

# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pinger@kamaz")

# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif


#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "//etc/kamailio/tls.cfg")
#!endif

#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)

# ----- htable params -----
# ip ban htable with autoexpire after 5 minutes
modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif

#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")
#!endif

#!ifdef WITH_DEBUG
# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
#!endif

####### Routing Logic ########


# Main SIP request routing logic
# - processing of any incoming SIP request starts with this route
# - note: this is the same as route { ... }
request_route {

	# per request initial checks
	route(REQINIT);

	xlog("L_NOTICE","$rm from $fu (IP:$si:$sp) Main Route before  ---NAT---\n");
	route(DEBUG);
	# NAT detection
	route(NATDETECT);

	xlog("L_NOTICE","$rm from $fu (IP:$si:$sp) in Route[NATDETECT] fix_nat-register\n");
	route(DEBUG);

	# CANCEL processing
	if (is_method("CANCEL"))
	{
		if (t_check_trans()) {
			route(RELAY);
		}
		exit;
	}

	route(DEBUG);

	# handle requests within SIP dialogs
	route(WITHINDLG);

	route(DEBUG);

	### only initial requests (no To tag)

	t_check_trans();

	route(DEBUG);

	# authentication
	route(AUTH);

	route(DEBUG);

	# record routing for dialog forming requests (in case they are routed)
	# - remove preloaded route headers
	remove_hf("Route");
	if (is_method("INVITE|SUBSCRIBE"))
		record_route();

	# account only INVITEs
	if (is_method("INVITE"))
	{
		setflag(FLT_ACC); # do accounting
	}

	# dispatch requests to foreign domains
	route(SIPOUT);

	### requests for my local domains

	# handle presence related requests
	route(PRESENCE);

	route(DEBUG);

	# handle registrations
	route(REGISTRAR);

	route(DEBUG);

	if ($rU==$null)
	{
		# request with no Username in RURI
		sl_send_reply("484","Address Incomplete");
		exit;
	}

	# dispatch destinations to PSTN
#	route(PSTN);

	route(DEBUG);

	# user location service
	route(LOCATION);

	route(DEBUG);

	route(RELAY);

}


route[RELAY] {

	# enable additional event routes for forwarded requests
	# - serial forking, RTP relaying handling, a.s.o.
	if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {
		if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH");
	}
	if (is_method("INVITE|SUBSCRIBE|UPDATE")) {
		if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY");
	}
	if (is_method("INVITE")) {
		if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE");
	}

	if (!t_relay()) {
		sl_reply_error();
	}
	exit;
}

# Per SIP request initial checks
route[REQINIT] {
#!ifdef WITH_ANTIFLOOD
	# flood dection from same IP and traffic ban for a while
	# be sure you exclude checking trusted peers, such as pstn gateways
	# - local host excluded (e.g., loop to self)
	if(src_ip!=myself)
	{
		if($sht(ipban=>$si)!=$null)
		{
			# ip is already blocked
			xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
			exit;
		}
		if (!pike_check_req())
		{
			xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");
			$sht(ipban=>$si) = 1;
			exit;
		}
	}
#!endif

	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	}

	if(!sanity_check("1511", "7"))
	{
		xlog("Malformed SIP message from $si:$sp\n");
		exit;
	}
}

# Handle requests within SIP dialogs
route[WITHINDLG] {
	if (has_totag()) {
		# sequential request withing a dialog should
		# take the path determined by record-routing
		if (loose_route()) {
			route(DLGURI);
			if (is_method("BYE")) {
				setflag(FLT_ACC); # do accounting ...
				setflag(FLT_ACCFAILED); # ... even if the transaction fails
			}
			else if ( is_method("ACK") ) {
				# ACK is forwarded statelessy
				route(NATMANAGE);
			}
			else if ( is_method("NOTIFY") ) {
				# Add Record-Route for in-dialog NOTIFY as per RFC 6665.
				record_route();
			}
			route(RELAY);
		} else {
			if (is_method("SUBSCRIBE") && uri == myself) {
				# in-dialog subscribe requests
				route(PRESENCE);
				exit;
			}
			if ( is_method("ACK") ) {
				if ( t_check_trans() ) {
					# no loose-route, but stateful ACK;
					# must be an ACK after a 487
					# or e.g. 404 from upstream server
					route(RELAY);
					exit;
				} else {
					# ACK without matching transaction ... ignore and discard
					exit;
				}
			}
			sl_send_reply("404","Not here");
		}
		exit;
	}
}

# Handle SIP registrations
route[REGISTRAR] {
	if (is_method("REGISTER"))
	{
		if(isflagset(FLT_NATS))
		{
			setbflag(FLB_NATB);
			# uncomment next line to do SIP NAT pinging
			setbflag(FLB_NATSIPPING);
		}
		if (!save("location"))
			sl_reply_error();


	#!ifdef WITH_ASTERISK
		route(REGFWD);
	#!endif

		exit;
	}
}


#!ifdef WITH_ASTERISK
# Test if coming from Asterisk
route[FROMASTERISK] {
	if($si==$sel(cfg_get.asterisk.bindip) && $sp==$sel(cfg_get.asterisk.bindport)) return 1;
	return -1;
}


# Send to Asterisk
route[TOASTERISK] {
	$du = "sip:" + $sel(cfg_get.asterisk.bindip) + ":" + $sel(cfg_get.asterisk.bindport);
	xlog("L_INFO","[$fU@$si:$sp]{$rm} From Outside World to Asterisk Box $du\n");
	route(RELAY);
	exit;
}

# Forward REGISTER to Asterisk
route[REGFWD] {
		if(!is_method("REGISTER"))
	{
		return;
	}

	xlog("[$mi] PRINT AU: $au PRINT fU: $fU Received SIP Message (method: $rm) ($ml bytes) to $Ri:$Rp from $si:$sp:\n$mb\n");

	t_relay_to_udp("50.0.0.10", "5060");

	xlog("[$mi] PRINT AU: $au PRINT fU: $fU Sended SIP Message (method: $rm) ($ml bytes) to $Ri:$Rp from $si:$sp:\n$mb\n");

}
#!endif

# USER location service
route[LOCATION] {

#!ifdef WITH_SPEEDDIAL
	# search for short dialing - 2-digit extension
	if($rU=~"^[0-9][0-9]$")
		if(sd_lookup("speed_dial"))
			route(SIPOUT);
#!endif

#!ifdef WITH_ALIASDB
	# search in DB-based aliases
	if(alias_db_lookup("dbaliases"))
		route(SIPOUT);
#!endif

#!ifdef WITH_ASTERISK
	if(is_method("INVITE") && (!route(FROMASTERISK))) {
		# if new call from out there - send to Asterisk
		# - non-INVITE request are routed directly by Kamailio
		# - traffic from Asterisk is routed also directy by Kamailio
		route(TOASTERISK);
		exit;
	}
#!endif

	$avp(oexten) = $rU;
	if (!lookup("location")) {
		$var(rc) = $rc;
		route(TOVOICEMAIL);
		t_newtran();
		switch ($var(rc)) {
			case -1:
			case -3:
				send_reply("404", "Not Found");
				exit;
			case -2:
				send_reply("405", "Method Not Allowed");
				exit;
		}
	}

	# when routing via usrloc, log the missed calls also
	if (is_method("INVITE"))
	{
		setflag(FLT_ACCMISSED);
	}

	route(RELAY);
	exit;
}

# Presence server route
route[PRESENCE] {
	if(!is_method("PUBLISH|SUBSCRIBE"))
		return;

	if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") {
		route(TOVOICEMAIL);
		# returns here if no voicemail server is configured
		sl_send_reply("404", "No voicemail service");
		exit;
	}

#!ifdef WITH_PRESENCE
	if (!t_newtran())
	{
		sl_reply_error();
		exit;
	}

	if(is_method("PUBLISH"))
	{
		handle_publish();
		t_release();
	} else if(is_method("SUBSCRIBE")) {
		handle_subscribe();
		t_release();
	}
	exit;
#!endif

	# if presence enabled, this part will not be executed
	if (is_method("PUBLISH") || $rU==$null)
	{
		sl_send_reply("404", "Not here");
		exit;
	}
	return;
}

# Authentication route
route[AUTH] {

#!ifdef WITH_ASTERISK
	# do not auth traffic from Asterisk - trusted!
	if(route(FROMASTERISK))
		return;
#!endif


#!ifdef WITH_AUTH

#!ifdef WITH_IPAUTH
	if((!is_method("REGISTER")) && allow_source_address())
	{
		# source IP allowed
		return;
	}
#!endif

	if (is_method("REGISTER") || from_uri==myself)
	{
		# authenticate requests
		if (!auth_check("$fd", "subscriber", "1")) {
			auth_challenge("$fd", "0");
			exit;
		}
		# user authenticated - remove auth header
		if(!is_method("REGISTER|PUBLISH"))
			consume_credentials();
	}
	# if caller is not local subscriber, then check if it calls
	# a local destination, otherwise deny, not an open relay here
	if (from_uri!=myself && uri!=myself)
	{
		sl_send_reply("403","Not relaying");
		exit;
	}

#!endif
	return;
}

# Caller NAT detection route
route[NATDETECT] {
#!ifdef WITH_NAT
	force_rport();
	if (nat_uac_test("19")) {
		if (is_method("REGISTER")) {
			fix_nated_register();
		} else {
			if(is_first_hop())
				set_contact_alias();
		}
		setflag(FLT_NATS);

	}
#!endif
	return;
}

# RTPProxy control
route[NATMANAGE] {
#!ifdef WITH_NAT
	if (is_request()) {
		if(has_totag()) {
			if(check_route_param("nat=yes")) {
				setbflag(FLB_NATB);
			}
		}
	}
	if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB)))
		return;

	rtpproxy_manage();

	if (is_request()) {
		if (!has_totag()) {
			if(t_is_branch_route()) {
				add_rr_param(";nat=yes");
			}
		}
	}
	if (is_reply()) {
		if(isbflagset(FLB_NATB)) {
			if(is_first_hop())
				set_contact_alias();
		}

	xlog("L_NOTICE","$rm from $fu (IP:$si:$sp) in route[NATMANAGE] RTPproxy with EI Flags\n");

	}
#!endif
	return;
}

# URI update for dialog requests
route[DLGURI] {
#!ifdef WITH_NAT
	if(!isdsturiset()) {
		handle_ruri_alias();

	xlog("L_NOTICE","$rm from $fu (IP:$si:$sp) in route[DLGURI] RTPproxy with EI Flags\n");

	}
#!endif
	return;
}

# Routing to foreign domains
route[SIPOUT] {
	if (!uri==myself)
	{
		append_hf("P-hint: outbound\r\n");
		route(RELAY);
	}
}

# PSTN GW routing
route[PSTN] {
#!ifdef WITH_PSTN
	# check if PSTN GW IP is defined
	if (strempty($sel(cfg_get.pstn.gw_ip))) {
		xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n");
		return;
	}

	# route to PSTN dialed numbers starting with '+' or '00'
	#     (international format)
	# - update the condition to match your dialing rules for PSTN routing
	if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$"))
		return;

	# only local users allowed to call
	if(from_uri!=myself) {
		sl_send_reply("403", "Not Allowed");
		exit;
	}

	if (strempty($sel(cfg_get.pstn.gw_port))) {
		$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);
	} else {
		$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":"
					+ $sel(cfg_get.pstn.gw_port);
	}

	route(RELAY);
	exit;
#!endif

	return;
}

# XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC] {
	# allow XMLRPC from localhost
	if ((method=="POST" || method=="GET")
			&& (src_ip==127.0.0.1)) {
		# close connection only for xmlrpclib user agents (there is a bug in
		# xmlrpclib: it waits for EOF before interpreting the response).
		if ($hdr(User-Agent) =~ "xmlrpclib")
			set_reply_close();
		set_reply_no_connect();
		dispatch_rpc();
		exit;
	}
	send_reply("403", "Forbidden");
	exit;
}
#!endif

# route to voicemail server
route[TOVOICEMAIL] {
#!ifdef WITH_VOICEMAIL
	if(!is_method("INVITE|SUBSCRIBE"))
		return;

	# check if VoiceMail server IP is defined
	if (strempty($sel(cfg_get.voicemail.srv_ip))) {
		xlog("SCRIPT: VoiceMail rotuing enabled but IP not defined\n");
		return;
	}
	if(is_method("INVITE")) {
		if($avp(oexten)==$null)
			return;
		$ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip)
				+ ":" + $sel(cfg_get.voicemail.srv_port);
	} else {
		if($rU==$null)
			return;
		$ru = "sip:" + $rU + "@" + $sel(cfg_get.voicemail.srv_ip)
				+ ":" + $sel(cfg_get.voicemail.srv_port);
	}
	route(RELAY);
	exit;
#!endif

	return;
}

# manage outgoing branches
branch_route[MANAGE_BRANCH] {
	xdbg("new branch [$T_branch_idx] to $ru\n");
	route(NATMANAGE);
}

# manage incoming replies
onreply_route[MANAGE_REPLY] {
	xdbg("incoming reply\n");
	if(status=~"[12][0-9][0-9]")
		route(NATMANAGE);
}

# manage failure routing cases
failure_route[MANAGE_FAILURE] {
	route(NATMANAGE);

	if (t_is_canceled()) {
		exit;
	}

#!ifdef WITH_BLOCK3XX
	# block call redirect based on 3xx replies.
	if (t_check_status("3[0-9][0-9]")) {
		t_reply("404","Not found");
		exit;
	}
#!endif

#!ifdef WITH_VOICEMAIL
	# serial forking
	# - route to voicemail on busy or no answer (timeout)
	if (t_check_status("486|408")) {
		$du = $null;
		route(TOVOICEMAIL);
		exit;
	}
#!endif
}


route[DEBUG] {
        if (method==("PUBLISH|SUBSCRIBE|REGISTER|OPTIONS")) {
                return;
        }
        xlog("[$mi] Received SIP Message (method: $rm) ($ml bytes) to $Ri:$Rp from $si:$sp:\n$mb\n");
}