Edimax Hero wlan.ko Module - dmesg

Plugging in rt8192cu wifi dongle

<4>[  310.707437@0] Using Buffer DMA mode
<4>[  310.707467@0] OTG VER PARAM: 1, OTG VER FLAG: 1
<4>[  331.183811@0] HOST mode
<4>[  331.397622@0] Using Buffer DMA mode
<4>[  331.397686@0] OTG VER PARAM: 1, OTG VER FLAG: 1
<4>[  331.446856@0] Init: Port Power? op_state=1
<4>[  331.446911@0] Init: Power Port (0)
<4>[  331.448709@0] set usb port power on (board gpio 25)!
<4>[  331.673813@0] Indeed it is in host mode hprt0 = 00021501
<6>[  331.853767@0] usb 1-1: new high speed USB device number 3 using dwc_otg
<4>[  331.855069@0] Indeed it is in host mode hprt0 = 00001101
<4>[  332.066855@1] register rtw_netdev_ops to netdev_ops
<4>[  332.066953@1] CHIP TYPE: RTL8188C_8192C
<4>[  332.069951@1]
<4>[  332.069957@1] usb_endpoint_descriptor(0):
<4>[  332.075823@1] bLength=7
<4>[  332.078011@1] bDescriptorType=5
<4>[  332.081288@1] bEndpointAddress=81
<4>[  332.084526@1] wMaxPacketSize=200
<4>[  332.087646@1] bInterval=0
<4>[  332.090250@1] RT_usb_endpoint_is_bulk_in = 1
<4>[  332.094637@1]
<4>[  332.094644@1] usb_endpoint_descriptor(1):
<4>[  332.100145@1] bLength=7
<4>[  332.102625@1] bDescriptorType=5
<4>[  332.105788@1] bEndpointAddress=2
<4>[  332.108912@1] wMaxPacketSize=200
<4>[  332.112123@1] bInterval=0
<4>[  332.114799@1] RT_usb_endpoint_is_bulk_out = 2
<4>[  332.119068@1]
<4>[  332.119073@1] usb_endpoint_descriptor(2):
<4>[  332.124775@1] bLength=7
<4>[  332.127140@1] bDescriptorType=5
<4>[  332.130264@1] bEndpointAddress=3
<4>[  332.133522@1] wMaxPacketSize=200
<4>[  332.136725@1] bInterval=0
<4>[  332.139293@1] RT_usb_endpoint_is_bulk_out = 3
<4>[  332.143705@1]
<4>[  332.143712@1] usb_endpoint_descriptor(3):
<4>[  332.149275@1] bLength=7
<4>[  332.151704@1] bDescriptorType=5
<4>[  332.154924@1] bEndpointAddress=84
<4>[  332.158128@1] wMaxPacketSize=40
<4>[  332.161252@1] bInterval=1
<4>[  332.163925@1] RT_usb_endpoint_is_int_in = 4, Interval = 1
<4>[  332.169242@1] nr_endpoint=4, in_num=2, out_num=2
<4>[  332.169251@1]
<4>[  332.175581@1] USB_SPEED_HIGH
<4>[  332.178592@0] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
<4>[  332.184044@0] RF_Type is 3!!
<4>[  332.187141@0] EEPROM type is E-FUSE
<4>[  332.190331@0] ====> ReadAdapterInfo8192C
<4>[  332.194380@0] Boot from EFUSE, Autoload OK !
<4>[  332.301347@0] EEPROMVID = 0x7392
<4>[  332.301399@0] EEPROMPID = 0x7811
<4>[  332.302157@0] EEPROMCustomerID : 0x00
<4>[  332.305844@0] EEPROMSubCustomerID: 0x00
<4>[  332.309622@0] RT_CustomerID: 0x00
<4>[  332.312928@0] _ReadMACAddress MAC Address from EFUSE = 80:1f:02:68:7b:f4
<4>[  332.319657@0] EEPROMRegulatory = 0x0
<4>[  332.323162@0] _ReadBoardType(0)
<4>[  332.326465@0] BT Coexistance = disable
<4>[  332.330021@0] RT_ChannelPlan: 0x00
<4>[  332.333423@0] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
<4>[  332.341681@0] ### PS params=>  power_mgnt(2),usbss_enable(0) ###
<4>[  332.347662@0] ### AntDivCfg(0)
<4>[  332.350679@0] readAdapterInfo_8192CU(): REPLACEMENT = 1
<4>[  332.356064@0] <==== ReadAdapterInfo8192C in 170 ms
<4>[  332.361782@0] rtw_register_early_suspend
<4>[  332.366210@0] rtw_macaddr_cfg MAC Address  = 80:1f:02:68:7b:f4
<4>[  332.370389@0] MAC Address from pnetdev->dev_addr= 80:1f:02:68:7b:f4
<4>[  332.386290@0] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
u0_a4@android:/ #

-----

Toggling Wifi in Settings App

<4>[214311.879107@1] +rtw_drv_halt
<4>[214311.879173@1] ##########rtw_suspend_lock_uninit###########
<6>[214311.881929@1] usbcore: deregistering interface driver rtl8192cu
<4>[214311.888091@1] +rtw_dev_remove
<4>[214311.890952@1] rtw_unregister_early_suspend
<4>[214311.895158@1] rtw_sta_flush
<4>[214311.934353@1] <=== rtw_dev_unload
<4>[214311.934424@1] +r871xu_dev_remove, hw_init_completed=0
<4>[214311.938060@1] free_recv_skb_queue not empty, 8
<4>[214311.941823@1] rtw_unregister_early_suspend
<4>[214311.947440@1] =====> rtl8192c_free_hal_data =====
<4>[214311.950718@1] <===== rtl8192c_free_hal_data =====
<4>[214311.955664@1] usb attached..., try to reset usb device
<4>[214311.960763@1] Indeed it is in host mode hprt0 = 00001101
<6>[214312.144331@1] usb 1-1: reset high speed USB device number 4 using dwc_otg
<4>[214312.145945@0] Indeed it is in host mode hprt0 = 00001101
<4>[214312.345197@0] -r871xu_dev_remove, done
<4>[214312.346427@0] -rtw_drv_halt
u0_a4@android:/ #