API tools faq
paste
Advertisement
Slokunshialgo

SMART errors on /dev/sdb

Slokunshialgo
Aug 6th, 2015
273
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.86 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-60-generic] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: ST3000DM001-1CH166
  6. Serial Number: Z1F1RDW4
  7. LU WWN Device Id: 5 000c50 04f08e9e7
  8. Firmware Version: CC24
  9. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  10. Sector Sizes: 512 bytes logical, 4096 bytes physical
  11. Device is: Not in smartctl database [for details use: -P showall]
  12. ATA Version is: 8
  13. ATA Standard is: ATA-8-ACS revision 4
  14. Local Time is: Thu Aug 6 20:45:02 2015 EDT
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x82) Offline data collection activity
  23. was completed without error.
  24. Auto Offline Data Collection: Enabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 584) seconds.
  30. Offline data collection
  31. capabilities: (0x7b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 1) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 255) minutes.
  48. Conveyance self-test routine
  49. recommended polling time: ( 2) minutes.
  50. SCT capabilities: (0x3085) SCT Status supported.
  51.  
  52. SMART Attributes Data Structure revision number: 10
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x000f 112 099 006 Pre-fail Always - 47788336
  56. 3 Spin_Up_Time 0x0003 094 093 000 Pre-fail Always - 0
  57. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 965
  58. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  59. 7 Seek_Error_Rate 0x000f 073 060 030 Pre-fail Always - 24598222
  60. 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21130
  61. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  62. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 77
  63. 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
  64. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  65. 187 Reported_Uncorrect 0x0032 088 088 000 Old_age Always - 12
  66. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  67. 189 High_Fly_Writes 0x003a 089 089 000 Old_age Always - 11
  68. 190 Airflow_Temperature_Cel 0x0022 072 061 045 Old_age Always - 28 (Min/Max 27/29)
  69. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  70. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 54
  71. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 982
  72. 194 Temperature_Celsius 0x0022 028 040 000 Old_age Always - 28 (0 14 0 0)
  73. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  74. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  76. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 228698418593721
  77. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 14682593689
  78. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 172435257150
  79.  
  80. SMART Error Log Version: 1
  81. ATA Error Count: 12 (device log contains only the most recent five errors)
  82. CR = Command Register [HEX]
  83. FR = Features Register [HEX]
  84. SC = Sector Count Register [HEX]
  85. SN = Sector Number Register [HEX]
  86. CL = Cylinder Low Register [HEX]
  87. CH = Cylinder High Register [HEX]
  88. DH = Device/Head Register [HEX]
  89. DC = Device Command Register [HEX]
  90. ER = Error register [HEX]
  91. ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 12 occurred at disk power-on lifetime: 21016 hours (875 days + 16 hours)
  97. When the command that caused the error occurred, the device was active or idle.
  98.  
  99. After command completion occurred, registers were:
  100. ER ST SC SN CL CH DH
  101. -- -- -- -- -- -- --
  102. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  103.  
  104. Commands leading to the command that caused the error were:
  105. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  106. -- -- -- -- -- -- -- -- ---------------- --------------------
  107. 60 00 00 ff ff ff 4f 00 8d+20:05:45.525 READ FPDMA QUEUED
  108. ef 10 02 00 00 00 a0 00 8d+20:05:45.525 SET FEATURES [Reserved for Serial ATA]
  109. 27 00 00 00 00 00 e0 00 8d+20:05:45.525 READ NATIVE MAX ADDRESS EXT
  110. ec 00 00 00 00 00 a0 00 8d+20:05:45.524 IDENTIFY DEVICE
  111. ef 03 46 00 00 00 a0 00 8d+20:05:45.524 SET FEATURES [Set transfer mode]
  112.  
  113. Error 11 occurred at disk power-on lifetime: 21016 hours (875 days + 16 hours)
  114. When the command that caused the error occurred, the device was active or idle.
  115.  
  116. After command completion occurred, registers were:
  117. ER ST SC SN CL CH DH
  118. -- -- -- -- -- -- --
  119. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  120.  
  121. Commands leading to the command that caused the error were:
  122. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  123. -- -- -- -- -- -- -- -- ---------------- --------------------
  124. 60 00 00 ff ff ff 4f 00 8d+20:05:42.528 READ FPDMA QUEUED
  125. ef 10 02 00 00 00 a0 00 8d+20:05:42.528 SET FEATURES [Reserved for Serial ATA]
  126. 27 00 00 00 00 00 e0 00 8d+20:05:42.528 READ NATIVE MAX ADDRESS EXT
  127. ec 00 00 00 00 00 a0 00 8d+20:05:42.528 IDENTIFY DEVICE
  128. ef 03 46 00 00 00 a0 00 8d+20:05:42.527 SET FEATURES [Set transfer mode]
  129.  
  130. Error 10 occurred at disk power-on lifetime: 21016 hours (875 days + 16 hours)
  131. When the command that caused the error occurred, the device was active or idle.
  132.  
  133. After command completion occurred, registers were:
  134. ER ST SC SN CL CH DH
  135. -- -- -- -- -- -- --
  136. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  137.  
  138. Commands leading to the command that caused the error were:
  139. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  140. -- -- -- -- -- -- -- -- ---------------- --------------------
  141. 60 00 00 ff ff ff 4f 00 8d+20:05:39.591 READ FPDMA QUEUED
  142. 60 00 00 ff ff ff 4f 00 8d+20:05:39.591 READ FPDMA QUEUED
  143. 60 00 00 ff ff ff 4f 00 8d+20:05:39.591 READ FPDMA QUEUED
  144. 60 00 80 ff ff ff 4f 00 8d+20:05:39.591 READ FPDMA QUEUED
  145. ef 10 02 00 00 00 a0 00 8d+20:05:39.590 SET FEATURES [Reserved for Serial ATA]
  146.  
  147. Error 9 occurred at disk power-on lifetime: 21016 hours (875 days + 16 hours)
  148. When the command that caused the error occurred, the device was active or idle.
  149.  
  150. After command completion occurred, registers were:
  151. ER ST SC SN CL CH DH
  152. -- -- -- -- -- -- --
  153. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  154.  
  155. Commands leading to the command that caused the error were:
  156. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  157. -- -- -- -- -- -- -- -- ---------------- --------------------
  158. 60 00 80 ff ff ff 4f 00 8d+20:05:36.603 READ FPDMA QUEUED
  159. 60 00 00 ff ff ff 4f 00 8d+20:05:36.603 READ FPDMA QUEUED
  160. 60 00 00 ff ff ff 4f 00 8d+20:05:36.603 READ FPDMA QUEUED
  161. 60 00 00 ff ff ff 4f 00 8d+20:05:36.519 READ FPDMA QUEUED
  162. ef 10 02 00 00 00 a0 00 8d+20:05:36.519 SET FEATURES [Reserved for Serial ATA]
  163.  
  164. Error 8 occurred at disk power-on lifetime: 21016 hours (875 days + 16 hours)
  165. When the command that caused the error occurred, the device was active or idle.
  166.  
  167. After command completion occurred, registers were:
  168. ER ST SC SN CL CH DH
  169. -- -- -- -- -- -- --
  170. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  171.  
  172. Commands leading to the command that caused the error were:
  173. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  174. -- -- -- -- -- -- -- -- ---------------- --------------------
  175. 60 00 00 ff ff ff 4f 00 8d+20:05:33.514 READ FPDMA QUEUED
  176. ef 10 02 00 00 00 a0 00 8d+20:05:33.514 SET FEATURES [Reserved for Serial ATA]
  177. 27 00 00 00 00 00 e0 00 8d+20:05:33.514 READ NATIVE MAX ADDRESS EXT
  178. ec 00 00 00 00 00 a0 00 8d+20:05:33.514 IDENTIFY DEVICE
  179. ef 03 46 00 00 00 a0 00 8d+20:05:33.514 SET FEATURES [Set transfer mode]
  180.  
  181. SMART Self-test log structure revision number 1
  182. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  183. # 1 Short offline Completed without error 00% 21129 -
  184. # 2 Short offline Completed without error 00% 18418 -
  185. # 3 Extended offline Completed without error 00% 1860 -
  186. # 4 Short offline Completed without error 00% 1855 -
  187.  
  188. SMART Selective self-test log data structure revision number 1
  189. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  190. 1 0 0 Not_testing
  191. 2 0 0 Not_testing
  192. 3 0 0 Not_testing
  193. 4 0 0 Not_testing
  194. 5 0 0 Not_testing
  195. Selective self-test flags (0x0):
  196. After scanning selected spans, do NOT read-scan remainder of disk.
  197. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!