API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 26th, 2016
190
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.60 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.1.20 (graham@tyr) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 r49195) ) #40 SMP Tue Apr 26 22:44:14 UTC 2016
  2. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  3. [ 0.000000] CPU frequency is 400 MHz
  4. [ 0.000000] 64MB of RAM installed
  5. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  6. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-102.6
  7. [ 0.000000] bootconsole [early0] enabled
  8. [ 0.000000] CPU0 revision is: 0002a031 (Broadcom BMIPS4350)
  9. [ 0.000000] board: board name: 96369PVG
  10. [ 0.000000] MIPS: machine is Netgear EVG2000
  11. [ 0.000000] Determined physical RAM map:
  12. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  13. [ 0.000000] Initrd not found or empty - disabling initrd
  14. [ 0.000000] Zone ranges:
  15. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  20. [ 0.000000] On node 0 totalpages: 16384
  21. [ 0.000000] free_area_init_node: node 0, pgdat 803f1f30, node_mem_map 810039e0
  22. [ 0.000000] Normal zone: 128 pages used for memmap
  23. [ 0.000000] Normal zone: 0 pages reserved
  24. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  25. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  26. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  27. [ 0.000000] PERCPU: Embedded 10 pages/cpu @81086000 s10048 r8192 d22720 u40960
  28. [ 0.000000] pcpu-alloc: s10048 r8192 d22720 u40960 alloc=10*4096
  29. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  30. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  31. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  32. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  33. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  34. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  35. [ 0.000000] Memory: 59204K/65536K available (3175K kernel code, 139K rwdata, 732K rodata, 1320K init, 203K bss, 6332K reserved, 0K cma-reserved)
  36. [ 0.000000] Hierarchical RCU implementation.
  37. [ 0.000000] NR_IRQS:256
  38. [ 0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  39. [ 0.000016] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
  40. [ 0.008676] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  41. [ 0.046960] pid_max: default: 32768 minimum: 301
  42. [ 0.052386] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  43. [ 0.059169] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.072739] SMP: Booting CPU1...
  45. [ 11.816414] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  46. [ 11.816429] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  47. [ 11.816738] CPU1 revision is: 0002a031 (Broadcom BMIPS4350)
  48. [ 0.124818] Synchronize counters for CPU 1:
  49. [ 0.124820] SMP: CPU1 is running
  50. [ 0.124838] done.
  51. [ 0.125029] Brought up 2 CPUs
  52. [ 0.144008] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  53. [ 0.155417] NET: Registered protocol family 16
  54. [ 0.165843] registering PCI controller with io_map_base unset
  55. [ 0.196522] PCI host bridge to bus 0000:00
  56. [ 0.200771] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  57. [ 0.207961] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  58. [ 0.214821] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  59. [ 0.221804] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  60. [ 0.230005] pci 0000:00:01.0: [14e4:4322] type 00 class 0x028000
  61. [ 0.231068] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00003fff]
  62. [ 0.237715] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  63. [ 0.237794] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
  64. [ 0.247664] Switched to clocksource MIPS
  65. [ 0.254621] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  66. [ 0.280722] ssb: Found chip with id 0x4322, rev 0x01 and package 0x09
  67. [ 0.287864] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 0x4243)
  68. [ 0.288398] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
  69. [ 0.288928] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
  70. [ 0.289458] ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
  71. [ 0.289989] ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 0x4243)
  72. [ 0.290520] ssb: Core 5 found: ARM Cortex M3 (cc 0x82A, rev 0x00, vendor 0x4243)
  73. [ 0.291051] ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, vendor 0x4243)
  74. [ 0.334572] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
  75. [ 0.342553] NET: Registered protocol family 2
  76. [ 0.348709] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  77. [ 0.355940] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  78. [ 0.362500] TCP: Hash tables configured (established 1024 bind 1024)
  79. [ 0.369212] UDP hash table entries: 256 (order: 1, 8192 bytes)
  80. [ 0.375244] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  81. [ 0.382190] NET: Registered protocol family 1
  82. [ 0.386783] PCI: CLS 0 bytes, default 16
  83. [ 0.389222] futex hash table entries: 512 (order: 1, 8192 bytes)
  84. [ 0.396905] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  85. [ 0.402942] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  86. [ 0.416355] io scheduler noop registered
  87. [ 0.420404] io scheduler deadline registered (default)
  88. [ 0.427919] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10, base_baud = 1562500) is a bcm63xx_uart
  89. [ 0.437552] console [ttyS0] enabled
  90. [ 0.444678] bootconsole [early0] disabled
  91. [ 0.453928] bcm63xx-rng bcm63xx-rng: registered RNG driver
  92. [ 0.461238] 18000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  93. [ 0.471580] 18000000.nor: Found an alias at 0x1000000 for the chip at 0x0
  94. [ 0.471638] Amd/Fujitsu Extended Query Table at 0x0040
  95. [ 0.476897] Amd/Fujitsu Extended Query version 1.3.
  96. [ 0.482078] number of CFI chips: 1
  97. [ 0.485907] bcm63xxpart: CFE boot tag found with version 6 and board type 96369PVG
  98. [ 0.493809] 6 bcm63xxpart partitions found on MTD device 18000000.nor
  99. [ 0.500462] Creating 6 MTD partitions on "18000000.nor":
  100. [ 0.505932] 0x000000000000-0x000000020000 : "CFE"
  101. [ 0.512995] 0x000000020100-0x00000016a56c : "kernel"
  102. [ 0.520175] 0x00000016a56c-0x000000f60000 : "rootfs"
  103. [ 0.527171] mtd: device 2 (rootfs) set to be root filesystem
  104. [ 0.533035] 1 squashfs-split partitions found on MTD device rootfs
  105. [ 0.539392] 0x0000003c0000-0x000000f60000 : "rootfs_data"
  106. [ 0.546897] 0x000000020000-0x000000f60000 : "linux"
  107. [ 0.553986] 0x000000f60000-0x000000fe0000 : "board_data"
  108. [ 0.561545] 0x000000fe0000-0x000001000000 : "nvram"
  109. [ 0.570108] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  110. [ 0.578490] SMP BCM63XX ENET
  111. [ 0.582155] BCM63XX enet: has_phy = 1
  112. [ 0.590057] bcm63xx_enet bcm63xx_enet.0: unable to register mdio bus
  113. [ 0.596765] bcm63xx_enet: probe of bcm63xx_enet.0 failed with error -5
  114. [ 0.639752] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  115. [ 0.650826] NET: Registered protocol family 10
  116. [ 0.657746] NET: Registered protocol family 17
  117. [ 0.662425] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  118. [ 0.675424] 8021q: 802.1Q VLAN Support v1.8
  119. [ 0.688229] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  120. [ 0.703368] Freeing unused kernel memory: 1320K (80406000 - 80550000)
  121. [ 2.181048] init: Console is alive
  122. [ 2.184823] init: - watchdog -
  123. [ 3.589375] usbcore: registered new interface driver usbfs
  124. [ 3.595258] usbcore: registered new interface driver hub
  125. [ 3.600972] usbcore: registered new device driver usb
  126. [ 3.609523] gpio-keys-polled gpio-keys-polled: unable to claim gpio 500, err=-16
  127. [ 3.617196] gpio-keys-polled: probe of gpio-keys-polled failed with error -16
  128. [ 3.630794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  129. [ 3.639246] ehci-platform: EHCI generic platform driver
  130. [ 3.747702] ehci-platform ehci-platform: EHCI Host Controller
  131. [ 3.753672] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  132. [ 3.762121] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
  133. [ 3.779681] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  134. [ 3.789491] hub 1-0:1.0: USB hub found
  135. [ 3.793466] hub 1-0:1.0: 2 ports detected
  136. [ 3.803873] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  137. [ 3.812071] ohci-platform: OHCI generic platform driver
  138. [ 3.817643] ohci-platform ohci-platform: Generic Platform OHCI controller
  139. [ 3.824668] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
  140. [ 3.832998] ohci-platform ohci-platform: irq 13, io mem 0xb0001600
  141. [ 3.897356] hub 2-0:1.0: USB hub found
  142. [ 3.901344] hub 2-0:1.0: 2 ports detected
  143. [ 3.915259] init: - preinit -
  144. [ 4.675195] random: procd urandom read with 65 bits of entropy available
  145. [ 7.996858] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
  146. [ 8.041656] procd: - early -
  147. [ 8.044746] procd: - watchdog -
  148. [ 8.835323] procd: - ubus -
  149. [ 8.891996] procd: - init -
  150. [ 9.601301] random: nonblocking pool is initialized
  151. [ 9.981797] ip6_tables: (C) 2000-2006 Netfilter Core Team
  152. [ 10.006336] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
  153. [ 10.013986] Backport generated by backports.git backports-20151218-0-g2f58d9d
  154. [ 10.025551] ip_tables: (C) 2000-2006 Netfilter Core Team
  155. [ 10.047888] nf_conntrack version 0.5.0 (945 buckets, 3780 max)
  156. [ 10.136242] xt_time: kernel timezone is -0000
  157. [ 10.245201] PPP generic driver version 2.4.2
  158. [ 10.252714] NET: Registered protocol family 24
  159. [ 10.298004] b43-phy0: Broadcom 4322 WLAN found (core revision 16)
  160. [ 10.335678] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 4
  161. [ 10.341959] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2056, Revision 3, Version 0
  162. [ 10.361458] Broadcom 43xx driver loaded [ Features: PNL ]
  163. [ 10.468688] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  164. [ 19.970756] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  165. [ 19.987723] jffs2_build_filesystem(): unlocking the mtd device... done.
  166. [ 19.994481] jffs2_build_filesystem(): erasing all blocks after the end marker...
  167. [ 21.265537] device eth0 entered promiscuous mode
  168. [ 21.288357] br-lan: port 1(eth0) entered forwarding state
  169. [ 21.293984] br-lan: port 1(eth0) entered forwarding state
  170. [ 23.295675] br-lan: port 1(eth0) entered forwarding state
  171. [ 24.595691] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  172. [ 24.714524] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  173. [ 24.726825] device wlan0 entered promiscuous mode
  174. [ 24.748324] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  175. [ 24.755129] br-lan: port 2(wlan0) entered forwarding state
  176. [ 24.760808] br-lan: port 2(wlan0) entered forwarding state
  177. [ 26.763700] br-lan: port 2(wlan0) entered forwarding state
  178. [ 94.745093] done.
  179. [ 94.747061] jffs2: notice: (854) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!