Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.12.08 23:45:00 =~=~=~=~=~=~=~=~=~=~=~=
- ?hello world!
- 5280 w5ai28t0 waiA[HDMI]: Set I2C Speed = 100 kHz
- [HDMI]: Chk_HotPlug() TV is not connected.
- [HDMI]: Read_EDID abort, HDMI cable plug off.
- [HDMI]: TV is not connected.
- PAL logo
- REALTEK ROM Monitor, Revision 0000.0201.0021.
- Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved.
- For a list of available commands, type 'help'.
- Compilation time /version= Jun 21 2010 16:07:01 /0000.0201.0021
- MAC address = 00.11.22.33.44.55
- Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
- Processor ID/revision = 0x93 / 0x78
- Endianness = Little
- Flash memory size = 256 MByte
- SDRAM size = 256 MByte
- First free SDRAM address = 0x800fad00
- Press 'ESC' to Monitor mode
- Linux Kernel:
- FW Image from 0xa2020000, to 0x80100000, size=0x3f2086
- Audio FW:
- FW Image from 0xa2420000, to 0x81b00000, size=0x1a14e8
- Video FW:
- FW Image from 0xa25e0000, to 0x81d80000, size=0x239680
- 5280Go 5280Go
- go
- 0Hx8D01M000I0 0R matdw pEarntsab=lrtek:_ naMPnGd: 24A70C43k ,2D20T1S6 0Ak(AC/ ),DD4P09 6kM(/LuPs r/
- l
- oc
- a
- l/SPetDIcF), 13Ra1w84 k Ernooabtlfsety: pMe=PyaG AfCfs32 rDooTS At=AC D3D1:P0 M1 L
- P
- R
- e
- sFet orEtcheer n2et chMa Focr.
- ma
- t:
- DAdTSd resDs T=S H0x8D01 A0C003 D00D
- P
- MLP AAC WMAPRO
- Realtek LINUX (DC ALIAS) started...
- Venus setting:
- ROSs have 2621440 bytes RAM.
- System CPU has 2 UARTs.
- System CPU uses external timer interrupt.
- Bootloader version: 0000.0201.0021. This version string is of new format.
- The information of this board: Company ID:0x0 CPU ID: 0x32 Board ID: 0x201
- Ethernet Mac address: 00.11.22.33.44.55
- Model Config length=0
- Base year of RTC is 2010.
- Config serial console: console=ttyS0,115200n8r
- prom_flashsize = 0x10000000
- Linux version 2.6.12.6-VENUS (vadmin@vadmin) (gcc version 3.4.4 mipssde-6.03.00-20051020) #AMP11 Wed Jul 31 16:23:50 MSD 2013
- audio addr: 1b00000
- CPU revision is: 00019378
- Determined physical RAM map:
- memory: 00100000 @ 00000000 (usable)
- memory: 00419000 @ 00100000 (reserved)
- memory: 015e7000 @ 00519000 (usable)
- memory: 00500000 @ 01b00000 (reserved)
- memory: 0e000000 @ 02000000 (usable)
- show info: max_low_pfn:65536
- show info: min_low_pfn:1305
- ZONE: DMA, PFN: 0
- ZONE: Normal, PFN: 32768
- ZONE: DVR, PFN: 4096
- Built 1 zonelists
- Kernel command line: mtdparts=rtk_nand:24704k,220160k(/),4096k(/usr/local/etc),13184k rootfstype=yaffs2 root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::
- Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
- Primary data cache 32kB, 4-way, linesize 32 bytes.
- Synthesized TLB refill handler (20 instructions).
- Synthesized TLB load handler fastpath (32 instructions).
- Synthesized TLB store handler fastpath (32 instructions).
- Synthesized TLB modify handler fastpath (31 instructions).
- Cache parity protection disabled
- PID hash table entries: 1024 (order: 10, 16384 bytes)
- Estimate value: CPU frequency 405.02 MHz
- Using 27.000 MHz high precision timer.
- Console: colour dummy device 80x25
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Memory: 249456k/252828k available (3334k kernel code, 3292k reserved, 561k data, 144k init, 0k highmem)
- Mount-cache hash table entries: 512
- Checking for 'wait' instruction... available.
- ========== board id: 201 ==========
- [INFO] neptune mode...
- boot_param value: a0002800
- mode: 1
- Se logo mode to PAL
- size: 1200
- color1: 0x808010
- color2: 0x80806a
- color3: 0x8080af
- color4: 0x8080eb
- NET: Registered protocol family 16
- SCSI subsystem initialized
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- se init module major number = 254
- size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...
- [user land] CmdBuf virt addr = 88044000/a804
- [Audio Firmware Version] 353448
- [Binary src compiled at] Mar 17 2011 10:04:10
- 4000, phy addr=08044000
- Hello, Realtek TLB Mapper
- AllocBP size: 344064 order: 7
- <<<DVR FREE AREA>>>
- 0: 0
- 1: 0
- 2: 0
- 3: 0
- 4: 0
- 5: 0
- 6: 0
- 7: 0
- 8: 1
- Addr: 81a00000, order: 8
- 9: 1
- Addr: 81800000, order: 9
- 10: 0
- 11: 1
- Addr: 81000000, order: 11
- 12: 6
- Addr: 87000000, order: 12
- Addr: 86000000, order: 12
- Addr: 85000000, order: 12
- Addr: 84000000, order: 12
- Addr: 83000000, order: 12
- Addr: 82000000, order: 12
- squashfs: version 3.1 (2006/08/19) Phillip Lougher
- devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
- devfs: boot_options: 0x1
- Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
- YAFFS Driver Rev:292241 (2010-01-19)
- YAFFS Driver is successfully installing.
- Initializing Cryptographic API
- Generic RTC Driver v1.07
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
- ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
- io scheduler noop registered
- RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize
- loop: loaded (max 8 devices)
- this MARS eth RX_OFFSET = 0x0
- 8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
- MAC address = 0x00.11.22.33.44.55
- eth0: RTL-8139C+ at 0xb8016000, 00:11:22:33:44:55, IRQ 2
- physmap flash device: 10000000 at fd00000
- Realtek NAND Flash Driver Rev:317223 (2010-06-01)
- One TC58NVG1S3E chip has 1 die(s) on board
- cp_hotplug
- nand part=TC58NVG1S3E, id=98da9015, device_size=268435456, chip_size=268435456, num_chips=1, isLastPage=0
- [rtk_nand_scan_bbt] have created bbt B0, just loads it !!
- [dump_BBT] Nand BBT Content
- Congratulation!! No BBs in this Nand.
- 4 cmdlinepart partitions found on MTD device rtk_nand
- RTK: using dynamic nand partition
- Creating 4 MTD partitions on "rtk_nand":
- 0x00000000-0x01820000 : "Partition_000"
- 0x01820000-0x0ef20000 : "/"
- 0x0ef20000-0x0f320000 : "/usr/local/etc"
- 0x0f320000-0x10000000 : "Partition_003"
- 0x00000000-0x10000000 : "disc"
- Realtek Nand Flash Driver is successfully installing.
- Initializing USB Mass Storage driver...
- usbcore: registered new driver usb-storage
- USB Mass Storage support registered.
- i2c /dev entries driver
- [I2C0] i2c speed changed to 100 KHz
- I2C0 Bus Status Check.... OK
- =========================
- = VER : 2.1b
- =========================
- = PHY : 0
- = MODE: MARS/JUPITER
- = SPD : 100
- = SAR : 0x024 (7 bits)
- = TX FIFO DEPTH : 8
- = RX FIFO DEPTH : 8
- = FIFO THRESHOLD: 4
- = BUS JAM RECORVER 3: ON
- = NON STOP WRITE : ON
- = GPIO RW SUPPORT : ON
- =========================
- [I2C1] i2c speed changed to 100 KHz
- I2C1 Bus Status Check.... OK
- =========================
- = VER : 2.1b
- =========================
- = PHY : 1
- = MODE: MARS/JUPITER
- = SPD : 100
- = SAR : 0x024 (7 bits)
- = TX FIFO DEPTH : 8
- = RX FIFO DEPTH : 8
- = FIFO THRESHOLD: 4
- = BUS JAM RECORVER 3: ON
- = NON STOP WRITE : ON
- = GPIO RW SUPPORT : ON
- =========================
- NET: Registered protocol family 2
- IP: routing cache hash table of 2048 buckets, 16Kbytes
- TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 16384 bind 16384)
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp.
- cp_open
- alloc rings cp->rxdesc_buf =0xa051a000 , cp->ring_dma=0x51a000
- init_hw
- init_hw finished
- IP-Config: Complete:
- device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254,
- host=192.168.0.9, domain=, nis-domain=(none),
- bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
- yaffs: dev is 32505857 name is "mtdblock1"
- yaffs: Attempting MTD mount on 31.1, "mtdblock1"
- RTK rtc can work.
- yaffs: restored from checkpoint
- VFS: Mounted root (yaffs2 filesystem) readonly.
- Mounted devfs on /dev
- Freeing prom memory: 0kb freed
- Reclaim bootloader memory from 80020000 to 80100000
- Freeing unused kernel memory: 144k freed
- Welcome to Realtek Linux
- Please press Enter to activate this console. yaffs: dev is 32505858 name is "mtdblock2"
- yaffs: Attempting MTD mount on 31.2, "mtdblock2"
- 120+0 records in
- 120+0 records out
- 61440 bytes (60.0KB) copied, 0.007889 seconds, 7.4MB/s
- Starting INET services....
- New Venus IR driver loaded
- Date Time syncronization...
- Starting lighttp service...
- libata version 1.12 loaded..
- Running dvdplayer with RootApp
- set corepath: /tmp/hdd/volumes/HDD1/
- RootApp AVHDD version...
- sata driver initial...2009/12/30 14:50
- sata driver patched 2013/02/07 (Virtual)
- mars_init_sata(1270)dev_addr:c00611f0
- enter 2nd case...
- ================================================
- ================================================
- root execute DvdPlayer...
- ================================================
- ================================================
- hotplug eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- IN : /tmp/ramfs/smb
- ata_device_add(4893)probe begin
- scsi0 : SATA_DRV
- sata dma reset
- downloader 0 starts, 0x19ab950
- downloader 1 starts, 0x19aba60
- Hotplug got one Net Hotplug of "LinkUP" from "eth0".
- [Dlna DMR] this is GDlnaMediaRendererAP
- CMD: mkdir -p /tmp/netb/smb
- In my system...
- CMD: mkdir -p /tmp/smb
- In my system...
- CMD: ifconfig > /tmp/netb/samba_my_ip
- In my system...
- Warning!! the Mask is 255.255.0.0.
- CMD: mkdir -p /tmp/nfsmounts
- In my system...
- In my system...
- GrandMa Revision: 358601
- !!!BootUP!!!
- Bootup t1 = 1397691991.367 sec
- In my system...
- sh: can't create /sys/realtek_boards/reclaim_dvr: Permission denied
- Bootup t2 = 1397691991.388 sec
- sata1: no device found (phy stat 00000000)
- sata1: ata_bus_probe failed
- scsi1 : SATA_DRV
- WARNING WARNING WARNING m_db_manage_flag_cnt = -1
- DB FILENAME = /tmp/ramfs/Setup
- sata dma reset
- [DataObject.cpp 440]DB Develop Version same . Don't be upgrade.
- [DataObject.cpp 479]DB Version same . Don't be upgrade.
- m_BookMark_Size=4096 m_Signature_Size=16
- pli initialization...
- ***256MB version...
- Memory address 0x40000000
- Bootup t3 = 1397691991.750 sec
- --- RtkBootUP(81): 8.998 sec
- +++ ALLOC index: 2560 order: 8
- 1. start remap DVR zone 81a00000(8054f000) 256...
- WatchDog does not receive signal for 5 seconds, value: 0
- map_done is 256...
- start[0-3] = {7001a500, 7001a504, 7001a508, 7001a50c}
- end[0-3] = {7001a510, 7001a514, 7001a518, 7001a51c}
- +++ ALLOC index: 2048 order: 9
- 1. start remap DVR zone 81800000(8054b000) 512...
- sata2: no device found (phy stat 00000000)
- sata2: ata_bus_probe failed
- map_done is 488...
- Video DebugMem PVIDEO_RPC_SetDebugMemory Called!+++ ALLOC index: 0 order: 7
- hysical Address 1. start remap DVR zone 81000000(8053b000) 128...
- = 0x851f400
- map_done is 128...
- +++ ALLOC index: 128 order: 7
- 1. start remap DVR zone 81080000(8053c000) 128...
- map_done is 128...
- +++ ALLOC index: 256 order: 8
- 1. start remap DVR zone 81100000(8053d000) 256...
- map_done is 256...
- [AUDIO WARNING]
- no more memory , do Remote Malloc. Size 0x00186008
- 667 loadThemeSetting resource.cpp
- No THEMESET_INI exists
- -=- create FT engine for ./Resource/font/arial.ttf
- [VoutUtil.cpp:1~~SetVideoStandard 7 1
- +++ ALLOC index: 512 order: 9
- 33,SetVideoStand1. start remap DVR zone 81200000(8053f000) 512...
- ard] 1, standard = 7
- [VoutUtil.cpp:134,SetVideoStandard] 2, enProg = 0
- [VoutUtil.cpp:135,SetVideoStandard] 3, enDIF = 1
- [VoutUtil.cpp:136,SetVideoStandard] 4, enCompRGB = 0
- [VoutUtil.cpp:137,SetVideoStandard] 5, pedType = 1
- [VoutUtil.cpp:138,SetVideoStandard] 6, dataInt0 = 4
- [VoutUtil.cpp:139,SetVideoStandard] 7, dataInt1 = 0
- WARNING[2]:TVE i-underflow @ line 0
- map_done is 512...
- +++ -------------------
- Audio Version = 353448 (mars)
- Common Version = 347207
- Build Date = Mar 17 2011
- Build Time = 10:04:10
- Note =
- -------------------
- A
- ClassifyBonding DD 0x00008180
- LLOC index: 24576 order: 11
- 1. start remap DVR zone 87000000(805fb000) 2048...
- map_done is 2043...
- abstractap semid=0
- semctl ret=0[DataObject.cpp 1355] SQL ERROR 8 : attempt to write a readonly database
- [DataObject.cpp,1429] error : 8 ,attempt to write a readonly database SQL :PRAGMA default_cache_size = 650;
- dec_pts = 25236, se_lock_pts = 12
- [HDMI]: Set AVMute
- [HDMI]: TURN OFF HDMI PHY for Mars
- [DataObject.cpp 1355] SQL ERROR 8 : attempt to write a readonly database
- [DataObject.cpp,1429] error : 8 ,attempt to write a readonly database SQL :PRAGMA default_cache_size = 650;
- [HDMI]: AP set setHDMIDeepColorMode=0 do nothing.
- [HDMI]: getHDMIPlugged()=-1
- [HDMI]: getHDMIReady()=0
- [HDMI]: getHDMISwitchTVSystem()=0
- from main function = 27655096
- [HDMI]: Turn on HDMI AUDIO
- [HDMI]: Send_AudioMute AP_SETUP_HDMI_MUTE=0 Select=2 PS=0
- [HDMI]: AP_SETUP_HDMI_MUTE=0
- [HDMI]: Clear HDMI Audio Mute(Turn on AUDIO)
- я
- ************ cl[I2C0] i2c speed changed to 50 KHz
- ose connection 1 ***********************
- ************ before listen 1 ***********************
- [HDMI]: Send_AudioMute() Ok, argp.hdmi_mute=0
- [HDMI]: MARS HDMI is running...
- [HDMI]: Disable HDCP
- [HDMI]: Disable YST Mode. YSTMode_cnt=1
- [HDMI]: USE_HDCP=NO in MakeConfig, do not Enable HDCP
- [HDMI]: Set I2C Speed = 50 kHz
- try - /dev/i2c/0
- [HDMI]: Increase i2c pull-low strength.
- [HDMI]: Hotplug Change !!! -1 -> 0 => No HDMI
- [HDMI]: Turn off HDMI VIDEO
- [HDMI]: Turn off HDMI VIDEO
- [HDMI]: Turn off HDMI VIDEO OK
- file system 3, cylinder 0
- mount to /tmp/hdd/volumes/HDD1
- file system 1, cylinder 0
- mount to na
- file system 2, cylinder 0
- mount to /tmp/hdd/root
- checked magic number = -2147483648
- [Video Firmware Version] 347937
- [Video Binary Built on] Jan 12 2011 18:35:52
- Node 0, zone DMA 4 1 1 1 2 2 1 2 0 0 0 1 0
- free pages: 2482
- Node 0, zone Normal 1 0 1 0 1 1 0 1 1 0 0 0 7
- free pages: 29109
- Node 0, zone DVR 0 0 0 0 0 0 1 0 0 0 0 1 3
- free pages: 14400
- cached size: 8143
- Node 0, zone DMA 4 1 1 1 2 2 1 2 0 0 0 1 0
- free pages: 2482
- Node 0, zone Normal 1 0 1 0 1 1 0 1 1 0 0 0 6
- free pages: 25013
- Node 0, zone DVR 0 0 0 0 0 0 1 0 0 0 0 1 3
- free pages: 14400
- cached size: 8144
- +++ ALLOC index: 1024 order: 10
- 1. start remap DVR zone 81400000(80543000) 1024...
- map_done is 1024...
- +++ ALLOC index: 26624 order: 3
- 1. start remap DVR zone 87800000(8060b000) 8...
- map_done is 8...
- Node 0, zone DMA 4 1 1 1 2 2 1 2 0 0 0 1 0
- free pages: 2482
- Node 0, zone Normal 8 3 4 2 0 0 1 1 1 0 0 0 6
- free pages: 25070
- Node 0, zone DVR 1 0 0 1 1 1 0 0 0 0 1 0 3
- free pages: 13369
- cached size: 8144
- Node 0, zone DMA 4 1 1 1 2 2 1 2 0 0 0 1 0
- free pages: 2482
- Node 0, zone Normal 1 1 3 2 0 0 1 1 1 0 0 0 5
- free pages: 20959
- Node 0, zone DVR 1 0 0 1 1 1 0 0 0 0 1 0 3
- free pages: 13369
- cached size: 8144
- Node 0, zone DMA 4 1 1 1 2 2 1 2 0 0 0 1 0
- free pages: 2482
- Node 0, zone Normal 1 0 0 0 0 0 1 1 1 0 0 0 5
- free pages: 20929
- Node 0, zone DVR 1 0 0 1 1 1 0 0 0 0 1 0 3
- free pages: 13369
- cached size: 8144
- Node 0, zone DMA 4 1 1 1 2 2 1 2 0 0 0 1 0
- free pages: 2482
- Node 0, zone Normal 1 0 0 0 0 0 1 1 1 0 0 0 4
- free pages: 16833
- Node 0, zone DVR 1 0 0 1 1 1 0 0 0 0 1 0 3
- free pages: 13369
- cached size: 8144
- VBM: configured to SD!
- [BONDING] ac3_dts_ddp dec= 0x00000000
- [BONDING] ac3_dts_ddp dec= 0x00000000
- dac's key = 0x00000001 (1 : has, 0: no key)
- [BONDING] MLP ret= 0x00000000, key= 0x00000000, HBR= 0x00000001, dac= 0x00000000
- dac's key = 0x00000000 (1 : has, 0: no key)
- [BONDING] MLP ret= 0xffffffff, key= 0x00000000, HBR= 0x00000001, dac= 0x00000001
- board = 1 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (1,0,0)
- Do you have key?(0 = no!) 0
- Bonding option process 0x00000009 to AUDIO_UNKNOWN_TYPE !!!
- [BONDING] ac3_dts_ddp dec= 0x00000000
- dac's key = 0x00000001 (1 : has, 0: no key)
- [BONDING] DTSHD ret= 0x00010000, getkey= 0x00000000, HBR = 0x00000001, dac= 0x00000000dac's key = 0x00000001 (1 : has, 0: no key)
- dac's key = 0x00000000 (1 : has, 0: no key)
- board = 1 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (0,1,0)
- Do you have key?(0 = no!) 0
- Bonding option process 0x0000001b to AUDIO_UNKNOWN_TYPE !!!
- dac's key = 0x00000000 (1 : has, 0: no key)
- board = 1 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (0,1,0)
- Do you have key?(0 = no!) 0
- Bonding option process 0x0000001c to AUDIO_UNKNOWN_TYPE !!!
- dac's key = 0x00000000 (1 : has, 0: no key)
- board = 1 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (0,1,0)
- Do you have key?(0 = no!) 0
- Bonding option process 0x0000001d to AUDIO_UNKNOWN_TYPE !!!
- dac's key = 0x00000000 (1 : has, 0: no key)
- board = 1 !, if -1, this board has illegal ID
- file is (AC3,DTS,WMA) (0,0,1)
- Do you have key?(0 = no!) 0
- Bonding option process 0x00000023 to AUDIO_UNKNOWN_TYPE !!!
- High = 0x00000000, Low = 0x03c1b4fe
- The following Format is supported:
- MPEG
- AC3
- LPCM
- DTS
- WMA
- AAC
- VORBIS
- DDP {AC3+, EAC3}
- WMA Pro
- MP4 LC-AAC
- MP4 HE-AAC
- RAW AAC
- ADPCM
- FLAC
- A Law PCM
- u Law PCM
- [VIDEO Capability]HighWord 0xffffffff, LowWord 0xffffffff
- In my system...
- Lord, will never leave me in my ignorance...
- In my system...
- We all die and going to hell with love and compassion...
- ###### - script pParam: rss_file://./home_menu/scripts/HomeMenu.rss
- ############### m_bIsActivate = 1
- Create View 0
- Error! no function named GetUserBackgroundImg
- [ScriptFunction_Home.cpp:794]:menuCommand()-(4): IMSAP (0x1a6efa0), TopMenu (0x1a6efb0), rss_file:///usr/local/etc/mos/iconmenu/wait.rss (0x1a6e9a8), NoBitBlt (0x1a6e9e0),
- [IMSAP.cpp][threadLoadMedia][1452]: Wait for condition variable
- [IMSAP.cpp][Activate][1371]: Create loadmedia thread done
- [DataObject.cpp 1355] SQL ERROR 8 : attempt to write a readonly database
- [DataObject.cpp,1429] error : 8 ,attempt to write a readonly database SQL :PRAGMA default_cache_size = 650;
- [DataObject.cpp 1355] SQL ERROR 8 : attempt to write a readonly database
- [DataObject.cpp,1429] error : 8 ,attempt to write a readonly database SQL :PRAGMA default_cache_size = 650;
- In my system...
- IN : /tmp/net
- Create /tmp/net Ok!!!
- open "/dev/cdrom0" failed
- Open device(/dev/cdrom0) failed
- [Dlna DMR] GDlnaMediaRendererAP is over
- In my system...
- This is the current time: PowerUP_Done!!!
- [AbstractAP.cpp:3302]:ProcessKey()- (4): IMSAP (0x1a6efa0), TopMenu (0x1a6efb0), rss_file:///usr/local/etc/mos/iconmenu/wait.rss (0x1a6e9a8), NoBitBlt (0x1a6e9e0),
- GetDeviceUp 0 flag : 0x1043
- SetupClass::GetInstance()->GetNetEth0DHCPEnable() = 1
- Click eth0 DHCP IP and DNS
- In my system...
- --- process key
- Delete View 0
- In my system...
- [IMSAP.cpp:1062]:Activate()- (4):
- [IMSAP.cpp:5726]:xHandleStringCmd()- (4): IMSAP (0x1a6efa0), TopMenu (0x1a6efb0), rss_file:///usr/local/etc/mos/iconmenu/wait.rss (0x1a6e9a8), NoBitBlt (0x1a6e9e0),
- [IMSAP.cpp:5749]:xHandleStringCmd()-m_starPage:rss_file:///usr/local/etc/mos/iconmenu/wait.rss
- In my system...
- [System2ApDaemon.cpp,threadSys2ApExe,156]msg type = 2 ,msg len = 8 ,msg = 65 74 68 30 20 55 50 00
- [Sys2ApBridge.cpp-CallBack_net_link_event-186] CMD - event_id = 2 MessageNumber = 1
- [CallBack_net_link_event-202] MsgCmd=UP
- IP : 192. 168. 0. 9
- [HDMI]: Seup HDMI HPD GPIO.
- [HDMI]: Setup_HPD_GPIO, de-bounce = 10 ms Mars
- In my system...
- SDK.bin exists. Continue...
- no private key file exists!!!!
- no device template file exists!!!!
- --------------- [IMSAP.cpp][IMSAPInit_one][4883]: HDD not found ----------------
- *********** in init, create Table ***********
- ############### m_bIsActivate = 1
- Create View 0
- auto set itemImageXPC to 35.000000
- [IMSAP.cpp][Activate][1371]: Create loadmedia thread done
- [IMSAP.cpp][threadLoadMedia][1452]: Wait for condition variable
- DrawBackbuffer
- [WT] Device number=0
- In my system...
- ====== IMSAP got network connected ======
- In my system...
- sh: /tmp/package/script/bt.script: not found
- In my system...
- udhcpc (v1.18.5) started
- sh: /tmp/package/script/bt.script: not found
- In my system...
- ifconfig eth0 169.254.216.67
- sh: /tmp/package/script/bt.script: not found
- In my system...
- sh: /tmp/package/script/unicgi: not found
- In my system...
- route add -net 0.0.0.0 netmask 0.0.0.0 eth0
- Sending discover...
- Sending select for 192.168.1.2...
- Refresh
- DrawBackbuffer
- picked dld 1, 0x19b38f8
- dthread 1, got a command
- begin job
- Lease of 192.168.1.2 obtained, lease time 86400
- [usb_param] setting for mars
- Setting for MARS-B
- [usb_param] set port two for host!
- #@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
- #@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
- #@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
- [usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
- [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- [usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
- [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- ehci_hcd ehci_hcd: EHCI Host Controller
- deleting routers
- route: SIOCDELRT: No such process
- adding dns 192.168.1.1
- DNS IP : 127. 0. 0. 1
- nameserver 127.0.0.1
- In my system...
- route: SIOCDELRT: No such device
- In my system...
- ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
- ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
- ehci_hcd ehci_hcd: park 0
- ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- hub : individual port power switching
- hub : individual port over-current protection
- route: SIOCDELRT: No such device
- [cfyeh] set PPE = 0
- [usb_param] setting for mars
- Setting for MARS-B
- [usb_param] set port two for host!
- #@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
- #@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
- #@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
- [usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
- [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- [usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
- [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- ohci_hcd ohci_hcd: OHCI Host Controller
- usb 1-1: new high speed USB device using ehci_hcd and address 2
- ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
- ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- hub : no power switching (usb 1.0)
- hub : no over-current protection
- [System2ApDaemon.cpp,threadSys2ApExe,156]msg type = 6 ,msg len = 5 ,msg = 31 20 55 50 00 00 00 00
- Hotplug got one USB Hotplug of "Add" from port "1".
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- hub : ganged power switching
- hub : global over-current protection
- In my system...
- connected 1, ptr 0x19b38f8
- downusb 1-1.3: new high speed USB device using ehci_hcd and address 3
- loading starts 1, 0x19b38f8
- read response 0, done 1
- download done for 1, 0x19b38f8
- clean up fd 1
- SAVE: IMSAP, Normal, All, All, All, All, All
- ###### - script pParam: rss_file://./home_menu/scripts/HomeMenu.rss
- Delete View 0
- In my system...
- rdate: timeout for nist1.symmetricom.com
- Fail
- Wed Apr 16 23:46:41 MSD 2014
- scsi2 : SCSI emulation for USB Mass Storage devices
- ############### m_bIsActivate = 1
- Create View 0
- Error! no function named GetUserBackgroundImg
- [IMSAP.cpp][Activate][1371]: Create loadmedia thread done
- [IMSAP.cpp][threadLoadMedia][1452]: Wait for condition variable
- syntax error
- Starting smbd services...
- Starting nmbd services...
- WatchDog does not receive signal for 5 seconds, value: 22
- =======================================================================================
- dec_pts = 2852, se_lock_pts = 6
- dec_pts = 1392, se_lock_pts = 3
- dec_pts = 1105, se_lock_pts = 4
- [System2ApDaemon.cpp,threadSys2ApExe,156]msg type = 6 ,msg len = 7 ,msg = 31 2E 33 20 55 50 00 00
- Hotplug got one USB Hotplug of "Add" from port "1.3".
- ioctl error: No such device
- getIPAddress 1862: NetworkSet::GetInstance Get failed !!!
- IP : 192. 168. 1. 2
- Refresh
- Error! no function named GetUserBackgroundImg
- convert char 3a
- convert char 2f
- convert char 2f
- convert char 2e
- convert char 2d
- convert char 2e
- convert char 2f
- convert char 2f
- convert char 2f
- convert char 2d
- convert char 2e
- convert char 3f
- convert char 3d
- convert char 3a
- convert char 26
- convert char 3d
- convert char 26
- convert char 3d
- picked dld 2, 0x19b39f8
- dthread 0, got a command
- begin job
- connected 2, ptr 0x19b39f8
- downloading starts 2, 0x19b39f8
- read response 0, done 2
- download done for 2, 0x19b39f8
- clean up fd 2
- IP : 192. 168. 1. 2
- =======================================================================================
- dec_pts = 2742, se_lock_pts = 1243
- dec_pts = 1244, se_lock_pts = 4
- dec_pts = 1103, se_lock_pts = 3
- -=- create FT engine for /usr/local/etc/mos/iconmenu/time.ttf
- getIPAddress 1862: NetworkSet::GetInstance Get failed !!!
- IP : 192. 168. 1. 2
- -=- create FT engine for /usr/local/etc/mos/iconmenu/ip.ttf
- Vendor: Generic Model: STORAGE DEVICE Rev: 9451
- Type: Direct-Access ANSI SCSI revision: 00
- modprobe: module 'sd_mod' not found
- NTP, contacting time-a.nist.gov for time
- NTP client has obtained time! set system....
- NTP success! quit!
- disk->capacity:0x0
- Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
- Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
- rmdir: '/var/lock/hotplug/mount_tmp/.sda': No such file or directory
- ufsd: module license 'Commercial product' taints kernel.
- ufsd: driver loaded at c01bc000 built on Aug 11 2009 20:12:04
- UFSD version 7.07 (Aug 11 2009, 19:57:52)
- NTFS read/write support included
- Hfs+/HfsX read/write support included
- $Id: ufsdvfs.c,v 1.228 2009/08/11 15:37:17 shura Exp $ (LBD=ON)
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- Refresh
- IP : 192. 168. 1. 2
- =======================================================================================
- dec_pts = 2764, se_lock_pts = 1243
- dec_pts = 1270, se_lock_pts = 2
- dec_pts = 1102, se_lock_pts = 3
- -=- create FT engine for /usr/local/etc/mos/iconmenu/time.ttf
- ioctl error: No such device
- getIPAddress 1862: NetworkSet::GetInstance Get failed !!!
- IP : 192. 168. 1. 2
- -=- create FT engine for /usr/local/etc/mos/iconmenu/ip.ttf
- disk->capacity:0x0
- mount: mounting /dev/scsi/host2/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No medium found
- mount: mounting /dev/scsi/host2/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No such device
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- disk->capacity:0x0
- mount: mounting /dev/scsi/host2/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No medium found
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- disk->capacity:0x0
- mount: mounting /dev/scsi/host2/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No medium found
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- Refresh
- IP : 192. 168. 1. 2
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- disk->capacity:0x0
- mount: mounting /dev/scsi/host2/bus0/target0/lun0/disc on /var/lock/hotplug/mount_tmp/.sda failed: No medium found
- mount: mounting /var/lock/hotplug/mount_tmp/.sda on /tmp/usbmounts/sda failed: Invalid argument
- Hotplug: "sda" has no partition.
- Hotplug: mount -t ufsd -o force,rw -o nls=utf8 -o umask=0 /dev/scsi/host2/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
- Hotplug: mount -t ntfs -o ro -o nls=utf8 -o umask=0 /dev/scsi/host2/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
- Hotplug: mount -t vfat -o ro,shortname=winnt -o utf8 -o umask=0 /dev/scsi/host2/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
- Hotplug: mount -t ext3 -o ro /dev/scsi/host2/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
- Hotplug: mount -t ext2 -o ro /dev/scsi/host2/bus0/target0/lun0/disc /var/lock/hotplug/mount_tmp/.sda ret: 255
- Hotplug: Mount --move "/tmp/usbmounts/sda" fail.
- reserve 2, name: sda
- cmd_buffer: echo /dev/scsi/host2/bus0/target0/lun0/disc > /tmp/ramfs/volumes/C:
- [System2ApDaemon.cpp,threadSys2ApExe,156]msg type = 4 ,msg len = 24 ,msg = 73 64 61 20 52 45 41 44
- [Sys2ApBridge.cpp-CallBack_block_event-619] CMD - event_id = 4 MessageNumber = 1 ,MSG = sda READY host2 USB 1.3
- ACTION: READY ==> host2, USB, 1.3 !!
- AppendStorageDevice Device Name : sda
- Add Device 3 Path : /dev/scsi/host2/bus0/target0/lun0/disc
- Hotplug got one BLOCK Hotplug of "Ready" from "sda"
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- disk->capacity:0x0
- [IdentifyDevice:3270], Hard Disk is not attached.
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- ###### [cfyeh] sdkp->media_present == 1, sdkp->capacity == 0
- Refresh
- IP : 192. 168. 1. 2
- disk->capacity:0x0
- [IdentifyDeviceMode:3376], Hard Disk is not attached.
- UpdateStorageInfo : !!!3!!!
- Current Storge Device ID : -1 !!
- aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaRefresh
- IP : 192. 168. 1. 2
- BusyBox v1.18.5 (2013-03-02 23:17:45 MSK) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- / # +++ ALLOC index: 27648 order: 10
- 1. start remap DVR zone 87c00000(80613000) 1024...
- map_done is 962...
- +++ ALLOC index: 20480 order: 10
- 1. start remap DVR zone 86000000(805db000) 1024...
- map_done is 1024...
- --- FREE index: 20480 order: 10
- --- FREE index: 27648 order: 10
- In my system...
- --- process key
- Delete View 0
- In my system...
- [HDMI] HDMI_thread(698) end !!!!
- [GBrowserGridViewAP.cpp:2366]:DeleteAllMenu()- KELLYKELLY - DeleteAllMenu!!
- MediaLoaderThread stopped
- org change count = 0 , total change count = 3
- Open device(/dev/cdrom0) failed
- WARNING: DVD unable to enter stand-by mode
- ______[DestoryTTSurface] AbstractAP.cpp 2096______
- VIDEO_RPC_VideoDestroy Called!VBM: deleting GOB id=0 ...
- VBM: deleting GOB id=1 ...
- VBM: deleting GOB id=2 ...
- VBM: deleting GOB id=3 ...
- VBM: deleting GOB id=4 ...
- VBM: deleting GOB id=5 ...
- VBM: deleting GOB id=6 ...
- VBM: deleting GOB id=7 ...
- VBM: deleting GOB id=8 ...
- VBM: deleting GOB id=9 ...
- --- FREE index: 26624 order: 3
- --- FREE index: 1024 order: 10
- [AUDIO WARNING]
- no more memory , do Remote Free
- --- FREE index: 512 order: 9
- --- FREE index: 2048 order: 9
- --- FREE index: 0 order: 7
- --- FREE index: 128 order: 7
- --- FREE index: 256 order: 8
- VIDEO_RPC_VideoHalt Called!
- semctl ret=0Entering Suspend Mode ..
- Delete Network
- Normal Kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 307
- not be killed pid file = 307 check /proc/ file = 307 ,
- Normal Kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 307
- Success to kill Pid File = /var/lock/udhcpc_eth0.pid , Pid = 307
- In my system...
- pppoe-stop: No PPPoE connection appears to be running
- WatchDog does not receive signal for 5 seconds, value: 72
- WatchDog does not receive signal for 5 seconds, value: 72
- [DataObject.cpp 669] database compact ok!!
- Open device(/dev/ide/host1/bus0/target0/lun0/disc) failed
- end of main()
- In my system...
- [GBrowserSelectAP.cpp:1245]:DeleteAllMenu()- KELLYKELLY - DeleteAllMenu!!
- [Dlna DMR] GDlnaMediaRendererAP is over
- clear pli setting....
- syslogd exiting
- pli initializati***256MB version...
- on...
- Memory address 0x40000000
- remount RO: ...
- chip id: 1283: Mars...
- 5280 wait5280 wai
- >>>>>> Got NAND Flash device!
- fw_desc_table_v1->signature=VERONA__
- fw_desc_table_v1->version=0x1
- fw_desc_table_v1->part_list_len=0xc0
- data_buf = 0x454938
- fw_desc_table_v1 = 0x454938
- sizeof(fw_desc_table_v1_t) = 0x20
- part_entry = 0x454958
- part_count= 0x4
- fw_entry = 0x454a18
- FW type, 0x2!
- Audio FW found!
- Video FW found!
- audio_fw_entry->offset = 0x1420000
- audio_fw_entry->length = 0x1a14e8
- audio_fw_entry->target_addr = 0x81b00000
- read len = 0x1a14e8
- video_fw_entry->offset = 0x15e0000
- video_fw_entry->length = 0x239680
- video_fw_entry->target_addr = 0x81d80000
- read len = 0x239680
- [mtdblock_release] Done
- [RPC]open for RPC ioctl...
- [RPC]start reset...
- [RPC]done...
- release address: 81a00000
- --- FREE index: 2560 order: 8
- release address: 87000000
- --- FREE index: 24576 order: 11
- clear pli setting....
- === RootApp::main() open file(/tmp/main.ret)=0x460138
- termination code: 99
- Checking irrp...
- [mtdblock_release] Done
- [mtdblock_release] Done
- Shutting down SMB services...
- Shutting down NMB services...
- Shutting down lighttp services...
- [mtdblock_release] Done
- mount: mounting /dev/root on / failed: Device or resource busy
- /usr/local/etc/rc.init/S02allSleep.sh : unloop
- /usr/local/etc/rc.init/S02allSleep.sh : mount as read only and umount
- /usr/local/etc/rc.init/S02allSleep.sh : unplug USB
- /usr/local/etc/rc.init/S02allSleep.sh : unload USB
- ohci_hcd ohci_hcd: remove, state 1
- usb usb2: USB disconnect, address 1
- ohci_hcd ohci_hcd: USB bus 2 deregistered
- ehci_hcd ehci_hcd: remove, state 1
- usb usb1: USB disconnect, address 1
- usb 1-1: USB disconnect, address 2
- usb 1-1.3: USB disconnect, address 3
- __scsi_remove_device(886)
- Hotplug got one USB Hotplug of "Remove" from port "1.3".
- Hotplug got one USB Hotplug of "Remove" from port "1".
- ehci_hcd ehci_hcd: USB bus 1 deregistered
- Hotplug: Cannot find "/tmp/usbmounts/sda".
- cmd_buffer: rm -rf /tmp/ramfs/volumes/C:
- cmd_buffer: rm -rf /tmp/ramfs/labels/C:
- Hotplug got one BLOCK Hotplug of "Clear" from "sda"
- sata module is ready for service.
- 1
- show_offline_dev_field(1325)dev_addr=c00611f0;
- sata1 :device0 not found
- sata2 :device1 not found
- mars_sata_work_fn
- device removed from sata port0
- mars_sata_work_fn(1156): no cmd Q
- mars_sata_work_fn(1187) hot plug end
- device removed from sata port1
- mars_sata_work_fn(1156): no cmd Q
- mars_sata_work_fn(1187) hot plug end
- sata device have removed.
- cat: can't open '/sys/bus/mmc/cr_offline': No such file or directory
- enter power savi***256MB version...
- ng mode...
- pli initialization...
- Memory address 0x40000000
- Stopping tasks: =========rpc-1 got signal...
- =rpc-3 got signal...
- ==============|
- Freeing memory...
- try_to_free_pages: free 300
- try_to_free_pages: free 0
- done (300 pages freed)
- generic_sata_suspend
- sata1 :no device found on port0
- sata2 :no device found on port1
- generic_sata_suspend(307)suspend finish
- cp_close
- free rings cp->rxdesc_buf =0xa051a000
- RTC time: 6 1e 17 2f 56
- Alarm time: c 28 3 10
- 12V5V_GPIO setting=1000002c
- options=0
- hwinfo=2
- powerkey_irrp=fd20bf00
- ejectkey_irrp=e817fc03
- powerkey_gpio=58
- ejectkey_gpio=-1
- vfd_type=0
- a015tb
- RTC time: 6 1e 17 2f 57
- Alarm time: c 28 3 10
- cp_open
- alloc rings cp->rxdesc_buf =0xa051a000 , cp->ring_dma=0x51a000
- init_hw
- init_hw finished
- mtdd resume
- mtdd resume
- mtdd resume
- sata_offline_resume
- Restarting tasks... done
- power wake up caclear pli setting....
- se...
- rm: can't remove '.' or '..'
- rm: can't remove '.' or '..'
- /usr/local/etc/rc.wakeup: line 2: /usr/local/etc/rc.init/S01aPower.sh: not found
- [usb_param] setting for mars
- Setting for MARS-B
- [usb_param] set port two for host!
- #@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
- #@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
- #@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
- [usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
- [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- [usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
- [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- ehci_hcd ehci_hcd: EHCI Host Controller
- ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1
- ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000
- ehci_hcd ehci_hcd: park 0
- ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- hub : individual port power switching
- hub : individual port over-current protection
- insmod: can't insert '/usr/local/etc/irfake/venus_ir_new.ko': File exists
- [cfyeh] set PPE = 0
- [usb_param] setting for mars
- Setting for MARS-B
- [usb_param] set port two for host!
- #@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 1 dr 0
- #@# cfyeh-debug USBPHY_SetReg_Default_33_port(238) port 2 dr 0
- #@# cfyeh-debug USBPHY_SetReg_Default_39(417) tx_delay 1
- [usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit
- [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- [usb2_param] usbphy reg 32, set sh = 0xa, get sh = 0xa, 4bit
- [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit
- [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit
- [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit
- [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit
- ohci_hcd ohci_hcd: OHCI Host Controller
- ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2
- ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- hub : no power switching (usb 1.0)
- hub : no over-current protection
- mount: mounting /dev/loop/0 on /usr/local/bin failed: Device or resource busy
- usb 1-1: new high speed USB device using ehci_hcd and address 2
- mount: mounting /dev/loop/1 on /usr/local/bin/Resource failed: Device or resource busy
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- hub : ganged power switching
- hub : global over-current protection
- Hotplug got one USB Hotplug of "Add" from port "1".
- usb 1-1.3: new high speed USB device using ehci_hcd and address 3
- scsi3 : SCSI emulation for USB Mass Storage devices
- Hotplug got one USB Hotplug of "Add" from port "1.3".
- Date Time syncronization...
- Starting lighttp service...
- pli initializati***256MB version...
- on...
- Memory address 0x40000000
- 5280Go 5280Go
- HDMI Raw Enable: MPG AC3 DTS AAC DDP MLP
- SPDIF Raw Enable: MPG AC3 DTS AAC DDP MLP
- Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO
- remount RW: ...
- W
- A
- RNI[ANG[u1]:diToVE i-u nFirmware Versdion]er flo3w5 @34 4l8i
- n[eBinary src 3 1c3om
- p
- WAiRled NIaNtG[1]:T]VE Mapr-un 1derf7 l2ow @ 0l11i 1ne 0:1
- 0
- 4:10
- clear pli setting....
- ================================================
- ================================================
- root execute DvdPlayer...
- ================================================
- ================================================
- hotplug eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- Hotplug got one Net Hotplug of "LinkUP" from "eth0".
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement