Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Quagga OSPF General
- OSPF Routing Process, Router ID: 10.0.20.1
- Supports only single TOS (TOS0) routes
- This implementation conforms to RFC2328
- RFC1583Compatibility flag is disabled
- OpaqueCapability flag is disabled
- Initial SPF scheduling delay 0 millisec(s)
- Minimum hold time between consecutive SPFs 50 millisec(s)
- Maximum hold time between consecutive SPFs 5000 millisec(s)
- Hold time multiplier is currently 2
- SPF algorithm last executed 10m52s ago
- Last SPF duration 145 usecs
- SPF timer is inactive
- Refresh timer 10 secs
- Number of external LSA 0. Checksum Sum 0x00000000
- Number of opaque AS LSA 0. Checksum Sum 0x00000000
- Number of areas attached to this router: 1
- All adjacency changes are logged
- Area ID: 0.0.0.0 (Backbone)
- Number of interfaces in this area: Total: 15, Active: 15
- Number of fully adjacent neighbors in this area: 1
- Area has no authentication
- SPF algorithm executed 5 times
- Number of LSA 3
- Number of router LSA 2. Checksum Sum 0x0000875a
- Number of network LSA 1. Checksum Sum 0x0000c161
- Number of summary LSA 0. Checksum Sum 0x00000000
- Number of ASBR summary LSA 0. Checksum Sum 0x00000000
- Number of NSSA LSA 0. Checksum Sum 0x00000000
- Number of opaque link LSA 0. Checksum Sum 0x00000000
- Number of opaque area LSA 0. Checksum Sum 0x00000000
- Quagga OSPF Neighbors
- Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL
- 192.168.2.1 255 Full/DR 32.052s 10.0.0.2 vmx1:10.0.0.1 0 0 0
- Quagga OSPF Database
- OSPF Router with ID (10.0.20.1)
- Router Link States (Area 0.0.0.0)
- Link ID ADV Router Age Seq# CkSum Link count
- 10.0.20.1 10.0.20.1 624 0x8000015f 0x33f2 15
- 192.168.2.1 192.168.2.1 659 0x80000096 0x5368 3
- Net Link States (Area 0.0.0.0)
- Link ID ADV Router Age Seq# CkSum
- 10.0.0.2 192.168.2.1 659 0x80000034 0xc161
- Quagga OSPF Router Database
- OSPF Router with ID (10.0.20.1)
- Router Link States (Area 0.0.0.0)
- LS age: 624
- Options: 0x2 : *|-|-|-|-|-|E|*
- LS Flags: 0x3
- Flags: 0x0
- LS Type: router-LSA
- Link State ID: 10.0.20.1
- Advertising Router: 10.0.20.1
- LS Seq Number: 8000015f
- Checksum: 0x33f2
- Length: 204
- Number of Links: 15
- Link connected to: Stub Network
- (Link ID) Net: 10.0.20.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: a Transit Network
- (Link ID) Designated Router address: 10.0.0.2
- (Link Data) Router Interface address: 10.0.0.1
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.2.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.3.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.4.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.5.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.6.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.7.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.8.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.9.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.10.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.11.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.12.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.19.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 10.0.1.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- LS age: 659
- Options: 0x2 : *|-|-|-|-|-|E|*
- LS Flags: 0x6
- Flags: 0x0
- LS Type: router-LSA
- Link State ID: 192.168.2.1
- Advertising Router: 192.168.2.1
- LS Seq Number: 80000096
- Checksum: 0x5368
- Length: 60
- Number of Links: 3
- Link connected to: Stub Network
- (Link ID) Net: 192.168.0.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: Stub Network
- (Link ID) Net: 192.168.1.0
- (Link Data) Network Mask: 255.255.255.0
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Link connected to: a Transit Network
- (Link ID) Designated Router address: 10.0.0.2
- (Link Data) Router Interface address: 10.0.0.2
- Number of TOS metrics: 0
- TOS 0 Metric: 10
- Quagga OSPF Routes
- ============ OSPF network routing table ============
- N 10.0.0.0/24 [10] area: 0.0.0.0
- directly attached to vmx1
- N 10.0.1.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan100
- N 10.0.2.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan2
- N 10.0.3.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan3
- N 10.0.4.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan4
- N 10.0.5.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan5
- N 10.0.6.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan6
- N 10.0.7.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan7
- N 10.0.8.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan8
- N 10.0.9.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan9
- N 10.0.10.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan10
- N 10.0.11.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan11
- N 10.0.12.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan12
- N 10.0.19.0/24 [10] area: 0.0.0.0
- directly attached to vmx1_vlan19
- N 10.0.20.0/24 [10] area: 0.0.0.0
- directly attached to bridge0
- N 192.168.0.0/24 [20] area: 0.0.0.0
- via 10.0.0.2, vmx1
- N 192.168.1.0/24 [20] area: 0.0.0.0
- via 10.0.0.2, vmx1
- ============ OSPF router routing table =============
- ============ OSPF external routing table ===========
- Quagga Zebra Routes
- Codes: K - kernel route, C - connected, S - static, R - RIP,
- O - OSPF, I - IS-IS, B - BGP, P - PIM, A - Babel,
- > - selected route, * - FIB route
- K>* 0.0.0.0/0 via 192.168.2.1, vmx2
- O 10.0.0.0/24 [110/10] is directly connected, vmx1, 00:11:05
- C>* 10.0.0.0/24 is directly connected, vmx1
- O 10.0.1.0/24 [110/10] is directly connected, vmx1_vlan100, 00:11:05
- C>* 10.0.1.0/24 is directly connected, vmx1_vlan100
- O 10.0.2.0/24 [110/10] is directly connected, vmx1_vlan2, 00:11:05
- C>* 10.0.2.0/24 is directly connected, vmx1_vlan2
- O 10.0.3.0/24 [110/10] is directly connected, vmx1_vlan3, 00:11:05
- C>* 10.0.3.0/24 is directly connected, vmx1_vlan3
- O 10.0.4.0/24 [110/10] is directly connected, vmx1_vlan4, 00:11:05
- C>* 10.0.4.0/24 is directly connected, vmx1_vlan4
- O 10.0.5.0/24 [110/10] is directly connected, vmx1_vlan5, 00:11:05
- C>* 10.0.5.0/24 is directly connected, vmx1_vlan5
- O 10.0.6.0/24 [110/10] is directly connected, vmx1_vlan6, 00:11:05
- C>* 10.0.6.0/24 is directly connected, vmx1_vlan6
- O 10.0.7.0/24 [110/10] is directly connected, vmx1_vlan7, 00:11:05
- C>* 10.0.7.0/24 is directly connected, vmx1_vlan7
- O 10.0.8.0/24 [110/10] is directly connected, vmx1_vlan8, 00:11:05
- C>* 10.0.8.0/24 is directly connected, vmx1_vlan8
- O 10.0.9.0/24 [110/10] is directly connected, vmx1_vlan9, 00:11:05
- C>* 10.0.9.0/24 is directly connected, vmx1_vlan9
- O 10.0.10.0/24 [110/10] is directly connected, vmx1_vlan10, 00:11:05
- C>* 10.0.10.0/24 is directly connected, vmx1_vlan10
- O 10.0.11.0/24 [110/10] is directly connected, vmx1_vlan11, 00:11:05
- C>* 10.0.11.0/24 is directly connected, vmx1_vlan11
- O 10.0.12.0/24 [110/10] is directly connected, vmx1_vlan12, 00:11:05
- C>* 10.0.12.0/24 is directly connected, vmx1_vlan12
- O 10.0.19.0/24 [110/10] is directly connected, vmx1_vlan19, 00:11:05
- C>* 10.0.19.0/24 is directly connected, vmx1_vlan19
- O 10.0.20.0/24 [110/10] is directly connected, bridge0, 00:11:05
- C>* 10.0.20.0/24 is directly connected, bridge0
- C>* 127.0.0.0/8 is directly connected, lo0
- O>* 192.168.0.0/24 [110/20] via 10.0.0.2, vmx1, 00:10:53
- O>* 192.168.1.0/24 [110/20] via 10.0.0.2, vmx1, 00:10:53
- C>* 192.168.2.0/24 is directly connected, vmx2
- Quagga OSPF Interfaces
- bridge0 is up
- ifindex 22, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.20.1/24, Broadcast 10.0.20.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.20.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- enc0 is down
- ifindex 6, MTU 1536 bytes, BW 0 Kbit <RUNNING>
- OSPF not enabled on this interface
- lo0 is up
- ifindex 7, MTU 16384 bytes, BW 0 Kbit <UP,LOOPBACK,RUNNING,MULTICAST>
- OSPF not enabled on this interface
- pflog0 is down
- ifindex 4, MTU 33160 bytes, BW 0 Kbit <RUNNING,PROMISC>
- OSPF not enabled on this interface
- pfsync0 is down
- ifindex 5, MTU 1500 bytes, BW 0 Kbit <RUNNING>
- OSPF not enabled on this interface
- vmx0 is down
- ifindex 1, MTU 1500 bytes, BW 0 Kbit <BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- OSPF not enabled on this interface
- vmx1 is up
- ifindex 2, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
- Internet Address 10.0.0.1/24, Broadcast 10.0.0.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State Backup, Priority 1
- Designated Router (ID) 192.168.2.1, Interface Address 10.0.0.2
- Backup Designated Router (ID) 10.0.20.1, Interface Address 10.0.0.1
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 1, Adjacent neighbor count is 1
- vmx1_vlan1 is up
- ifindex 21, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- OSPF not enabled on this interface
- vmx1_vlan2 is up
- ifindex 15, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.2.1/24, Broadcast 10.0.2.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.2.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan3 is up
- ifindex 14, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.3.1/24, Broadcast 10.0.3.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.3.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan4 is up
- ifindex 13, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.4.1/24, Broadcast 10.0.4.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.4.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan5 is up
- ifindex 12, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.5.1/24, Broadcast 10.0.5.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.5.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan6 is up
- ifindex 11, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.6.1/24, Broadcast 10.0.6.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.6.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan7 is up
- ifindex 10, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.7.1/24, Broadcast 10.0.7.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.7.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan8 is up
- ifindex 9, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.8.1/24, Broadcast 10.0.8.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.8.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan9 is up
- ifindex 8, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.9.1/24, Broadcast 10.0.9.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.9.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan10 is up
- ifindex 16, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.10.1/24, Broadcast 10.0.10.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.10.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan11 is up
- ifindex 17, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.11.1/24, Broadcast 10.0.11.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.11.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan12 is up
- ifindex 18, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.12.1/24, Broadcast 10.0.12.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.12.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan19 is up
- ifindex 19, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.19.1/24, Broadcast 10.0.19.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.19.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx1_vlan100 is up
- ifindex 20, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- Internet Address 10.0.1.1/24, Broadcast 10.0.1.255, Area 0.0.0.0
- MTU mismatch detection:enabled
- Router ID 10.0.20.1, Network Type BROADCAST, Cost: 10
- Transmit Delay is 1 sec, State DR, Priority 1
- Designated Router (ID) 10.0.20.1, Interface Address 10.0.1.1
- No backup designated router on this network
- Multicast group memberships: OSPFAllRouters OSPFDesignatedRouters
- Timer intervals configured, Hello 10s, Dead 40s, Wait 40s, Retransmit 5
- Hello due in 6.347s
- Neighbor Count is 0, Adjacent neighbor count is 0
- vmx2 is up
- ifindex 3, MTU 1500 bytes, BW 0 Kbit <UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
- OSPF not enabled on this interface
- Quagga OSPF CPU Usage
- CPU (user+system): Real (wall-clock):
- Runtime(ms) Invoked Avg uSec Max uSecs Avg uSec Max uSecs Type Thread
- 9.427 22 428 1834 334 705 R vty_read
- 0.957 146 6 70 7 69 EX ospf_nsm_event
- 3.006 149 20 126 23 127 R ospf_read
- 0.500 58 8 51 8 50 R zclient_read
- 0.673 132 5 12 5 21 TE ospf_ls_req_timer
- 0.783 66 11 46 14 46 T ospf_lsa_refresh_walker
- 0.161 3 53 58 62 78 T ospf_ase_calculate_timer
- 0.059 5 11 13 11 13 E ospf_ls_upd_send_queue_event
- 0.243 22 11 27 13 27 T ospf_lsa_maxage_walker
- 0.995 131 7 20 9 21 T (ospf_ls_upd_timer)
- 0.463 5 92 153 92 154 T ospf_spf_calculate_timer
- 46.350 9182 5 1659 5 44 T (ospf_ls_ack_timer)
- 35.336 1018 34 13158 22 159 W ospf_write
- 0.060 14 4 6 4 7 T (ospf_wait_timer)
- 0.060 1 60 60 61 61 E zclient_connect
- 1.720 23 74 122 82 138 R vty_accept
- 6.578 1005 6 20 7 25 T (ospf_hello_timer)
- 2.513 31 81 255 88 255 E ospf_ism_event
- 109.884 12013 9 13158 8 705 RWTEXB TOTAL
- Quagga OSPF Memory
- Temporary memory : 1
- String vector : 2
- Vector : 826
- Vector index : 826
- Link List : 166
- Link Node : 145
- Thread : 45
- Thread master : 1
- Thread stats : 18
- VTY : 2
- Interface : 22
- Connected : 35
- Buffer : 2
- Buffer data : 1
- Stream : 4
- Stream data : 4
- Prefix : 53
- Hash : 1
- Hash Bucket : 18
- Hash Index : 1
- Route table : 637
- Route node : 128
- Command desc : 8749
- Logging : 1
- Zclient : 1
- Priority queue : 2
- Priority queue data : 2
- Host config : 2
- VRF : 1
- VRF name : 1
- VRF bit-map : 16
- -----------------------------
- OSPF top : 1
- OSPF area : 1
- OSPF network : 15
- OSPF interface : 15
- OSPF neighbor : 16
- OSPF route : 32
- OSPF LSA : 3
- OSPF LSA data : 3
- OSPF LSDB : 2
- OSPF packet : 1
- OSPF FIFO queue : 15
- OSPF path : 32
- OSPF if info : 22
- OSPF if params : 22
- -----------------------------
- Quagga ospfd.conf
- # This file was created by the pfSense package manager. Do not edit!
- password Qognify!
- log syslog
- interface bridge0
- interface vmx1_vlan12
- interface vmx1_vlan11
- interface vmx1_vlan10
- interface vmx1_vlan9
- interface vmx1_vlan8
- interface vmx1_vlan7
- interface vmx1_vlan6
- interface vmx1_vlan5
- interface vmx1_vlan4
- interface vmx1_vlan3
- interface vmx1_vlan2
- interface vmx1_vlan19
- interface vmx1_vlan100
- interface vmx1
- router ospf
- ospf router-id 10.0.20.1
- log-adjacency-changes detail
- network 10.0.20.0/24 area 0.0.0.0
- network 10.0.12.0/24 area 0.0.0.0
- network 10.0.11.0/24 area 0.0.0.0
- network 10.0.10.0/24 area 0.0.0.0
- network 10.0.9.0/24 area 0.0.0.0
- network 10.0.8.0/24 area 0.0.0.0
- network 10.0.7.0/24 area 0.0.0.0
- network 10.0.6.0/24 area 0.0.0.0
- network 10.0.5.0/24 area 0.0.0.0
- network 10.0.4.0/24 area 0.0.0.0
- network 10.0.3.0/24 area 0.0.0.0
- network 10.0.2.0/24 area 0.0.0.0
- network 10.0.19.0/24 area 0.0.0.0
- network 10.0.1.0/24 area 0.0.0.0
- network 10.0.0.0/24 area 0.0.0.0
- Quagga zebra.conf
- # This file was created by the pfSense package manager. Do not edit!
- password ********
- log syslog
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement