HELLO! BOOT0 is starting!
boot0 version :
boot0 commit : 2aa7c53095bc52fa01b07d15eb724d4c4b2f92f3

fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.4
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
start ddr type auto scan mode .
NOT GATE MODE
READ DQS LCDL = 00212022
ddr3 try success.
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 576 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 10f40400
DRAM dram para2: 00000000
DRAM workmode1: 000009f4
DRAM SIZE =1024 M
odt delay
dram size =1024
NAND_PIORequest, nand_index: 0x00001000
Reg 0x01c20848: 0x0004adeb
Reg 0x01c2084c: 0x0004adde
Reg 0x01c20850: 0x0004adde
NAND_ClkRequest, nand_index: 0x0004adf6
Reg 0x01c20080: 0x0004adf3
Reg 0x01c20060: 0x0004ade6
Reg 0x01c202c0: 0x0004ade6
NAND_SetClk, nand_index: 0x0000000a
Reg 0x01c20080: 0x0004adf7
NB0 : nand phy init ok
sum=b66c5a4b
src_sum=b66c5a4b
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[      0.312]e mode

U-Boot 2011.09-rc1-dirty (May 12 2016 - 15:18:13) Allwinner Technology

[      0.320]version: 1.1.0
[      0.322]uboot commit : 2aa7c53095bc52fa01b07d15eb724d4c4b2f92f3

not using multi config
normal mode
[      0.335]pmbus:   ready
not set main pmu id
axp_probe error
[board_vendor] vid_used not used
[      0.375]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[      0.406]DRAM:  1 GiB
relocation Offset is: 35af1000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
[      0.485]NAND: NAND_UbootInit
NAND_UbootInit start
NB1 : enter NAND_LogicInit
uboot:nand version: 2 22 20150401 1122
nand : get id_number_ctl fail, 7fb9924f
uboot:nand info: 9394de45 ffff5076 3018c 321f09 4
nand : get CapacityLevel fail, 7fb98616
not burn nand partition table!
boot_mode 1: nftl num: 3
 init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[      1.150]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
script config pll_periph0 to 600 Mhz
[boot]disp_init_tv
[DISP_TV] disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
[BOOOT_DISP_TV] disp tv device_registered
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
read byte = 10
read byte = 10
[get_display_resolution] = 406
read byte = 10
[get_display_resolution] = 20b
boot_disp.auto_hpd=1
auto hpd check has 0 times!
attched ok, mgr0<-->device0, type=4, mode=6----
ready to set mode
[      2.040]finally, output_type=0x4, output_mode=0x6, screen_id=0x0, disp_para=0x406
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:14-
-name-        -start-       -size-
bootloader  : 1000000       1000000
env         : 2000000       1000000
boot        : 3000000       1000000
system      : 4000000       30000000
misc        : 34000000      1000000
recovery    : 35000000      2000000
sysrecovery : 37000000      30000000
private     : 67000000      1000000
Reserve0    : 68000000      1000000
klog        : 69000000      1000000
Reserve1    : 6a000000      2000000
Reserve2    : 6c000000      1000000
cache       : 6d000000      28000000
UDISK       : 95000000      0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_nand boot_normal
Item0 (Map) magic is bad
the secure storage map is empty
no item name mac in the map
sunxi storage read fail
no item name wifi_mac in the map
sunxi storage read fail
no item name bt_mac in the map
sunxi storage read fail
no item name specialstr in the map
sunxi storage read fail
no item name serialno in the map
sunxi storage read fail
check user data form private
the user data'magic is bad
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
f_read btr over hd12896
read byte = 3686538
[      2.387]screen_id =0, screen_width =1920, screen_height =1080
[      2.393]frame buffer address 46400036
[      2.397]Hit any key to stop autoboot:  0
read boot or recovery all
[      2.906]sunxi flash read :offset 3000000, 12666445 bytes OK
[      2.914]ready to boot
board_display_setenv:  disp_para=406 init_disp=20b0406 tv_vdid=1e6d0100
[      2.923][mmc]: MMC Device 2 not found
[      2.926][mmc]:  mmc  not find,so not exit
NAND_UbootExit
NB1 : NAND_LogicExit
nand release dma:0
[      2.930]
Starting kernel ...

[sun8i_fixup]: From boot, get meminfo:
        Start:  0x40000000
        Size:   1024MB
ion_carveout reserve: 160m@0 300m@0 130m@1 200m@1
ion_reserve_select: ion chipid  [0x2c00081!
ion_reserve_common: ion reserve: [0x4d400000, 0x60000000]!