k3b - iso_02

Devices
-----------------------
HUAWEI Mass Storage 2.31 (/dev/sr2, CD-ROM) [Hiba] [Egyik sem] [%7]
Optiarc DVD RW AD-7173A 1-04 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R (soros), DVD-R (kétrétegű, soros), DVD-R (kétrétegű ugrás), DVD-RAM, DVD-RW (korlátozott felülírás), DVD-RW (soros), DVD+RW, DVD+R, DVD+R (kétrétegű), CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R, Korlátozott felülírás, Rétegugrás] [%7]
PIONEER DVD-RW  DVR-115D 1.13 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R (soros), DVD-R (kétrétegű, soros), DVD-R (kétrétegű ugrás), DVD-RW (korlátozott felülírás), DVD-RW (soros), DVD+RW, DVD+R, DVD+R (kétrétegű), CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Korlátozott felülírás, Rétegugrás] [%7]

System
-----------------------
K3b Version: 2.0.1
KDE Version: 4.4.5 (KDE 4.4.5)
QT Version:  4.6.3
Kernel:      2.6.32-5-686

Used versions
-----------------------
cdrecord: 3.0

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
/usr/bin/cdrecord: Warning: Cannot read drive buffer.
/usr/bin/cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 J�rg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-115D'
Revision       : '1.13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-R sequential recording
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  1243 MB
Total size:     1243 MB = 636416 sectors
Current Secsize: 2048
Total power on  hours: 75040
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1662080
Reducing transfer size from 64512 to 32768 bytes.
Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
   2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Starting new track at sector: 0
Track 01:    0 of 1243 MB written.
Track 01:    1 of 1243 MB written (fifo  93%)  23.0x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 03 10 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 04 00 00 00 00 0E 00 00 00 00 44 D9 00 00
Sense Key: 0x4 Hardware Error, deferred error, Segment 0
Sense Code: 0x44 Qual 0xD9 (internal target failure) [No matching qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 1605632 bytes
Writing  time:   25.071s
Average write speed  37.7x.
Fixating...
Fixating time:    0.011s
/usr/bin/cdrecord: fifo had 177 puts and 50 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was 86%.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree fs=4m -data -tsize=636416s -