Clear text within hboot_7230_0.76.2000_100820.nb0

###[ RUU Mode ]###

###[ Fastboot Mode ]###
 RUU FASTBOOT    RUU USB FASTBOOT USB    fb_cmd_clearflag:%s
    OKAY    fb_cmd_setflag:%s
  Prepare to download data[%d Bytes]...
  fb_cmd_oem:%s
  splash1 splash2 FAILpartition name is too long  FAILpartition is not existed!   mfg misc    FAILpartition is not allowed to be erased!  FAILerasing error!  Reproduce [%s] image with new RamDisk...
   [ERR] fb_reproduce_bootimg_ramdisk[%s]: partition_read[BOOT_IMG_HDR] fail!!!
   ANDROID!    [ERR] fb_reproduce_bootimg_ramdisk[%s]: image does not exist!!!
 (Boot Magic check fail)
   [ERR] fb_reproduce_bootimg_ramdisk[%s]: alloc heap(%d) for kernel zimage fail!!!
   [ERR] fb_reproduce_bootimg_ramdisk[%s]: partition_read[zimage] fail!!!
 [ERR] fb_reproduce_bootimg_ramdisk[%s]: RamDisk size is too large(%d)!!! (limit=%d bytes)
  [ERR] fb_reproduce_bootimg_ramdisk[%s]: alloc heap(%d) for new boot image fail!!!
  Reproduce [%s] image with new zImage...
    [ERR] fb_reproduce_bootimg_zimage[%s]: partition_read[BOOT_IMG_HDR] fail!!!
    [ERR] fb_reproduce_bootimg_zimage[%s]: image does not exist!!!
 (Boot Magic check fail)
    [ERR] fb_reproduce_bootimg_zimage[%s]: alloc heap(%d) for ramdisk fail!!!
  [ERR] fb_reproduce_bootimg_zimage[%s]: partition_read[ramdisk] fail!!!
 [ERR] fb_reproduce_bootimg_zimage[%s]: zImage size is too large(%d)!!! (limit=%d bytes)
    [ERR] fb_reproduce_bootimg_zimage[%s]: alloc heap(%d) for new boot image fail!!!
   FAILsizes of kernel and ramdisk in downloaded boot image can not both be zero   FAILreproduce boot image with on-flash ramdisk error    FAILreproduce boot image with on-flash zimage error fastboot boot zimage: adapting user cmdline...
 [%s]
   FAIL01 data length must bigger than 0   FAIL02 data length is too large FAIL03 memory allocate fail FAIL11 no transfered data   FAIL12 signature verify fail    FAIL13 battery low  FAIL21 lack of heap for unzipping image FAIL22 loading zip info fail    FAIL23 parsing image fail   FAIL24 parsing android-info fail    FAIL31 checksum fail    FAIL32 header error FAIL41 model id check fail  FAIL42 custom id check fail FAIL43 main version check fail  FAIL51 partition update fail    FAIL52 image check fail FAIL53 image unzipping fail FAIL90 hboot pre-update! please flush image again immediately   FAIL91 partition read fail  FAIL99 unknown fail nvs diagzip diagnbh zimage  rzimage recovery    ramdisk rramdisk    FAILimage error! (BootMagic check fail) FAILimage error! (Platform check fail)  Partition[%s] does not exist!
  FAILpartition does not exist!   FAILpartition is not allowed to be flushed! INFOimage update is bypassed!   FAILimage update error  0.5 version-bootloader  version-baseband    version-cpld    None    version-microp  version-main    mainver %s  UNKNOWN imei    product platform    mid modelid cid cidnum  battery-status  good    low battery-voltage %dmV    partition-layout    security    off build-mode  ENG boot-mode    (Hboot PreUpdate)   (Hboot&Radio PreUpdate)    commitno-bootloader version-tp  hbootpreupdate  11  gencheckpt  FAILunknown command all INFO    OKAYDone!   fastboot_command:[%s]
  getvar: oem     reboot-bootloader   reboot  download:   CMD:download: %s
  recv data addr=%x size=%x
  status: %s
    flash:  INFOadopting the signature contained in this image...   system  userdata    radio   INFOsignature checking...   signature   FAILno data transfered  FAILsignature not 256 bytes long    erase:  FAILboot image error    SetFlag:    ClearFlag:  OTHER   DEZERO  MERGEMFG    EXT3    YAFFS   [%s]:(%s, %x) block start=%d, size=%d (%d KB)
 [PARTITION_ERR] partition_write_prot_emmc: Cannot find start partition [%s]
    [PARTITION_ERR] partition_write_prot_emmc: Cannot find end partition [%s]
  [PARTITION_ERR] partition_write_prot_emmc: The end partition [%s] cannot be in front of the start partition [%s]
   [PARTITION_ERR] partition_write_prot_mmc: eMMC initial fail
    [PARTITION_ERR] partition_write_prot_mmc: eMMC FW_WP_GRP_SIZE_INFO fail
    [PARTITION_ERR] partition_write_prot_mmc: start sector is not group size aligned!
  [PARTITION_ERR] partition_write_prot_mmc: eMMC FW_SET_WRITE_PROT_GROUP fail
    [ERR] mfg header error!
   [ERR] Lack of memory for mfg header!
  [ERR] MFG write emmc sector error!
 [ERR] MFG write emmc error!
    [ERR] mfg header index %d: real_len error!
    [ERR] %s(%d): error %d
 [ERR] <Error>partition_write::Too many bad blocks(out of range)
    [ERR] <Error>partition_write::Failed to write page %d
  [ERR] <Error>Roll back data and mark bad block
 merge_emmc  [PARTITION_ERR] There is no format(erase) function hooked for EXT3 type partition[%s]!n [PARTITION_ERR] No supported format(erase) function for partition[%s]!n [ERR] Lack of memory for unzip!
   [ERR] Fail to erase partition %s
   [ERR] Fail to init eMMC [ERR] image version is %s, base version is %s
  [ERR] Can not roll back hboot
  Can not roll back hboot version [ERR] Image size is bigger than partition size
 [ERR] partition_update offset is not emmc sector[%d] aligment! Offset[%d]
  [ERR] partition_update offset is not nand page[%d] aligment! Offset[%d]
    [ERR] partition_update offset is not nand page+oob[%d] aligment! Offset[%d]
    [ERR] <Error>partition_write_yaffs::Failed to write page %d
    [ERR] Partition[%s] doesn't support partial update!
    [ERR] partition_read::Can not allocate heap for byte_offset read
   [ERR] partition_read::Too many bad blocks(out of range)
    [PARTITION_ERR] Not support partition type
 AutoImageUpdate AUDI1026    there is no audi1026 firmware in MFG partition
 Heap allocating for saving MFG is failed!
  invalid parameters
 misc3   misc2   AutoImageDone                   set_recovery_status: %s
    !!!Error,unknown recovery status: %d
   <Error>setting_set_bootmode: bootmode %d not supported
 setting->cid::%s
   Device CID is not super CID
    Device CID is super CID
    *   GetModelName- Default[%s]
 Main MID does not match [%s] or [%s]!
 lcd pcb recovery
--gen_checkpt
--reboot=oem-74
 recovery
--gen_checkpt
--reboot=oem-42
 recovery
--gen_checkpt
 cache   Allocte heap for setting struct error!
 FNOC    Restore data from original MISC...
    Adopting default serial NO. (%s)
  123456789012    TMUS    T-MOB010    TMD T-MOB101    TMA T-MOB102    TMNL    T-MOB003    TMCZ    T-MOB004    TMUK    T-MOB005    TMHR    T-MOB006    TMH T-MOB007    TMSK    T-MOB008    Era T-MOB009    TMMK    T-MOBL11    VODA-UK VODAP001    VODA-Germany    VODAP102    VODA-Italy  VODAP405    VODA-SFR    VODAP203    VODA-Spain  VODAP304    VODA-Netherland VODAPE17    VODA-Ireland    VODAP019    VODA-Greece VODAP006    VODA-Portugal   VODAPD18    VODA-Swisscom-WWE   VODAP015    VODA-Swisscom-DE    VODAP110    VODA-Swisscom-FR    VODAP212    VODA-Swisscom-IT    VODAP416    VODA-Australia  VODAP021    VODA-New-Zealand    VODAP022    VODA-Mobilkom   VODAP120    VODA-Proximus   VODAP024    VODA-TR VODAPM27    ORANGE-French   ORANG202    ORANGE-UK   ORANG001    ORANGE-ES   ORANG309    ORANGE-BE   ORANG012    ORANGE-PO   ORANG008    ORANGE-CH-FRA   ORANG203    ORANGE-CH-GER   ORANG104    ORANGE-SK   ORANG006    ORANGE-PL   ORANGB10    ORANGE-AT   ORANG113    GOOGLE  GOOGL001    TELEF-Spain TELEF301    TELUS   TELUS001    DCM DOCOM801    ATT CWS__001    Brightstar-SPA  BSTAR301    Brightstar-PTB  BSTAR502    VIRGIN-UK   VIRGI001    O2-UK   O2___001    HTC-Czech   HTC__C24    HTC-Denmark HTC__F08    HTC-Norway  HTC__H10    HTC-Sweden  HTC__G09    HTC-Poland  HTC__B25    HTC-Russia  HTC__A07    HTC-Turkey  HTC__M27    HTC-GCC HTC__J15    HTC-Australia   HTC__023    HTC-Singapore   HTC-FRA HTC__203    StarHub-Singapore   VODA-Africa-South   HTC__016    AirTel-India    TIM-Italy   TIM__401    H3G-Italy   H3G__402    Optus-Australia OPTUS001    Hutch-Australia HUTCH001    SMC-Voda-HK SMCVD001    Chunghwa-Taiwan CHT__601    Rogers  ROGER001    HTC-EastEurope  HTC__032    HTC-GER HTC__102    HTC-ITA HTC__405    HTC-Dutch   HTC__E11    HTC-Nor HTC__Y13    HTC-WWE HTC__001    HTC-ELL HTC__N34    HTC-SPA HTC__304    HTC-PTG HTC__506    DOPOD   DOPOD701    Open-Channel    HTCCN701    CT  HTCCN702    CU  HTCCN703    HTC-Asia-SEA    HTC__037    HTC-India   HTC__038    Fastweb-IT  FASTW401    O2-DE   O2___102    TWM-TW  HTC__621    Asia-HK-CHT HTC__622    HTC-Asia-SEA-WWE    HTC__044    HTC-FRA-Bouygues    HTC__247    HTC-BE  HTC__E41    VODA-SA VODAP026    ALL 11111111    H3G-DAN H3G__F05    H3G-SWE H3G__G04    H3G-UK  H3G__001    H3G-ROI H3G__003    Bouygues-Telecom    BOUYG201    Telstra TELST001    BM  BM_001  Dopod-China [RECOVERY_ERR] Hboot image error! (Platform check fail) [RECOVERY_ERR] Hboot signature check fail!  [RECOVERY_ERR] recovery_flash_zip: Can't find firmware zip...
  [RECOVERY_ERR] Wrong zipped image!
 [RECOVERY_ERR] security check failed!
 (signature is not match)
   [RECOVERY_ERR] Wrong zipped image!  [RECOVERY_ERR] No image found in zip
  [RECOVERY_ERR] zip update failed(%s)
  [RECOVERY_INFO] zip update complete...
    MSM-RADIO-UPDATE    [RECOVERY_ERR] Can not allocate heap to load radio image!
  [RECOVERY_INFO] start radio image loading...
   [RECOVERY_INFO] radio image load complete... takes %d sec
  [RECOVERY_INFO] image verification: read %d bytes, checksum %X(arm9:%X)
    [ERR] %s: type error %d
    WirelessType = %d
  [SD_ERR] No registered driver can be found!
   [SD_ERR] No sd card inserted!
 [emapi_is_signature_valid] type not found.
 [ERR] Signature mismatch! Data corruption?
 CRC mismatch! Data corruption
  [eMapiUpdateWlanDataHeader] Wrong signature
    [ERR] %s: parameter error
  macaddr [ERR] can't find the macaddr pattern
   Signature mismatch! Data corruption?
   Board_PID : %d
 without within  reset WiFi calibration to default [%s] MAC address
 Initialize wlan data success
   Initialize wlan data fail

 BOOTLOADER  RECOVERY    CLEAR STORAGE   SIMLOCK REBOOT  REBOOT BOOTLOADER   POWER DOWN  FACTORY RESET   SYSTEM INFO IMAGE CRC   %s FastBoot Mode    %s HBoot Mode   %s Reset Device %s Restart to HBoot %s Yes  %s No   %s Power Down   %s Simlock  %s Recovery %s to next item %s to previous item %s to select item   ShowProgressBar: invalid percentage!
   ShowProgressBar: invalid rect!
 INFO[RUU]%s,%s,%d   WP  ,%d Download fail!  Cancel update!  Low battery!    Model ID incorrect! CID incorrect!  Signature incorrect!    Checksum incorrect! Security fail!  Lack of heap for unzipping image!   Loading zip info fail!  Parsing image fail! Parsing android-info fail!  Image unzipping fail!   Partition update fail!  Main Version is older!  Image check fail!   Unknown fail!   - OK    - Fail  - Fail-MA   - Fail-PU   - Fail-IC   - Fail-UZ   - Unzipping - Updating  - Bypassed  [%d] %s RADIO_V2    MFG_DIAG    SPLASH1 sp1 SPLASH2 sp2 SP_CUSTOM   spcustom    SP_CHG  spchg   SYSTEM  dzsystem    OPL opl LOCAL   local   FOTA    fota    USERDATA    dzdata  merge_mfg   CPLD    MICROP  RADIO_NV    nv  RADIO_CUST  rcdata  TP_MELFAS   tp-melfas   TP_ATMEL    tp_atmel    TP  TOUCHSCREEN touchscreen RAW_TOUCH1  x_touchscreen   RAW_TOUCH2  d_touchscreen   XLOADER xloader WIFI    wifi    CMMB    cmmb    PARTITION   MDM9K   mdm9k   [DISPLAY_ERR] invalid display module!
  [DISPLAY_ERR] can not update screen!!
  [DISPLAY_ERR] can not update screen!! (display_module.update_screen == NULL)
   Allocte heap for frame buffer error! (System halted)
   Allocte heap for RUU frame buffer error! (System halted)
   [DISPLAY_ERR] display module not found!
    hboot:    0x%x  boot:     0x%x  recovery: 0x%x  system:   0x%x  Unknow partition    Calculating... please wait  LCD-    TOUCH PANEL-    IMEI-   RAM-%dMB    eMMC-%s %dMB %dsectors   Wifi   Wifi is not calibrated.
     AWB    AWB is not calibrated: %x %x
    LSC    LSC is not calibrated: %x %x %x %x
  LSen   Light sensor is not calibrated: %x %x %x %x
     RF RF is not calibrated: %x
    SN serial no- %s
  00:11:22:33:44:55   Wifi MAC-  %s
   BT BT MAC-  %x %x %x %x %x %x
 [DISPLAY_ERR] sp_custom partition: sp_custom_img_hd read error!
    HTCCUSSP    [DISPLAY_ERR] sp_custom image does not exist!!!
    [DISPLAY_ERR] allocate heap for sp_custom_img_info error!!!
    [DISPLAY_ERR] sp_custom partition: sp_custom_img_info read error!
  [DISPLAY_ERR] non-support image format!!!
  [DISPLAY_ERR] allocate heap for unlock_warlost_buf.img_buf error!!!
    [DISPLAY_ERR] sp_custom partition: unlock_warlost_buf.img_buf read error!
  [DISPLAY_ERR] allocate heap for unlock_disp_buf.img_buf error!!!
   [DISPLAY_ERR] sp_custom partition: unlock_disp_buf.img_buf read error!
 [DISPLAY_ERR] allocate heap for unlock_select_yes_buf.img_buf error!!!
 [DISPLAY_ERR] sp_custom partition: unlock_select_yes_buf.img_buf read error!
   [DISPLAY_ERR] allocate heap for unlock_select_no_buf.img_buf error!!!
  [DISPLAY_ERR] sp_custom partition: unlock_select_no_buf.img_buf read error!
    [DISPLAY_ERR] sp_custom splashes loading error!
    [DISPLAY_ERR] Can not load custom splash!
  [DISPLAY_ERR] Location of warrant_lost_splash is out of LCD panel!
 *** UNLOCKED ***    HBOOT-   (  CPLD-   MICROP- N/A RADIO-  eMMC-boot   Aug 20 2010,16:51:01    [DISPLAY_ERR] size of unlock_disp_buf is larger than frame_buffer!
 CLEARSTORAGE    start keypad testing ...
   <UNDEFINED>
    keypad testing is finished.
    <UNKNOWN>   <POWER> <SEND>  <END>   <BACK>  <HOME>  <ACTION>    <UP>    <UP ON QWERTY>  <DOWN>  <DOWN ON QWERTY>    <LEFT>  <LEFT ON QWERTY>    <RIGHT> <RIGHT ON QWERTY>   <CAMEMA STEP1>  <CAMERA STEP2>  <VOL UP>    <VOL DOWN>  <MENU>  <MENU ON QWERTY>    <LEFT SHIFT>    <RIGHT SHIFT>   <LEFT ALT>  <RIGHT ALT> <LEFT CAP>  <RIGHT CAP> <ENTER> <DEL>   <SPACE> <,> <.> <@> </> <SYM>   <0> <1> <2> <3> <4> <5> <6> <7> <8> <9> <A> <B> <C> <D> <E> <F> <G> <H> <I> <J> <K> <L> <M> <N> <O> <P> <Q> <R> <S> <T> <U> <V> <W> <X> <Y> <Z> <FN>    <SMS>   <CANCEL>    <IM>    <SEARCH>    <OJ PUSH>   <WAKE UP>   aARM_Partion[%x].name=%s
   datadata    devlog  partition number=%d
    setup_tag addr=0x%X cmdline add=0x%X
   TAG:Ramdisk OK
  androidboot.baseband=  CID is super CID
   Backup CID is empty
    Backup CID is %s
   CID is %s
   androidboot.cid=    androidboot.batt_poweron=  die_battery good_battery     androidboot.carrier=    androidboot.mid=    enable_zcharge=1    androidboot.keycaps=    androidboot.mode=  recovery_manual power_test  offmode_charging    normal   androidboot.serialno=  serial number: %s
   androidboot.bootloader=     androidboot.profiling=YES  commandline from head: %s
  command line length =%d
    active commandline: %s
 Valid partition num=%d
 [ERR] boot image does not exist!!!
 jump_to_kernel: machine_id(%d), tags_addr(0x%x), kernel_addr(0x%x)
 -------------------%s:%d msec
  hboot boot time +%X  %B %B %B %B %B %B %B %B %B %B %B %B %B %B %B %B

 [DumpHeapAllocedTab] Addr[0x%x], Size[%d]

 =======================================================
   HeapAllocedTable[%d], Used[%d], Addr[0x%x], Size[%d]
  HeapAllocedTable[%d], Used[%d]
    [DumpHeapFreeTab] Addr[0x%x], Size[%d]

    HeapFreeTable[%d], Used[%d], Addr[0x%x], Size[%d]
 HeapFreeTable[%d], Used[%d]
   [HEAP_ERR] HeapFreeTable[%d] overflow
 [HEAP_ERR] There is no more heap memory which is big enough for new HeapFreeTable to recycle the original HeapAllocedTable.
   [HEAP_ERR] A free heap segment will be lost! Addr[0x%x], Size[%d]
 [HEAP_ERR] There is no more heap memory which is big enough for new HeapFreeTable to save the frgament memory caused by alignment-shift for remapping HeapTable.
  [HEAP_ERR] HeapFreeTable[%d] overflow
  [HEAP_ERR] There is no more heap memory which is big enough for new HeapFreeTable to recycle the freed heap segment.
  [HEAP_ERR] heap_free_table_insert(): Parameter Error! (PhyPtr=0x%X, Size=%d)

  [HEAP_ERR] heap_free_table_insert(): PhytoVir Convert Fail! (PhyPtr=0x%X, Size=%d)

    [HEAP_ERR] heap_free_table_insert(): Range Error! (Locate in HeapFreetable[%d], Addr[0x%X], Size=[%d])
 (New VirPtr=0x%X, Size=%d)

    [HEAP_ERR] heap_free_table_insert(): Range Error(Locate in HeapAllocedtable[%d], Addr[0x%X], Size=[%d])!
 (New PhyPtr=0x%X, Size=%d)

  [HEAP_ERR] Can not find matched AllocedTable elements...Addr[0x%x]

    [HEAP_ERR] Don't try to free a NULL point...

  [HEAP_ERR] There is no more heap memory which is big enough for new HeapFreeTable to save the remain frgament memory caused by the alignment-shift of the aligned heap allocation.
    [HEAP_ERR] HeapAllocedTable[%d] overflow
   [HEAP_ERR] heap overflow: free maximan fragment Size[%d], allocSize[%d], alignedReq[%d]
    [HEAP_ERR] heap overflow: free maximan fragment Size[%d], allocSize[%d
 EMMC Init eror
    FW_SECTOR_INFO error!
  start_sect %d, num_sect %d, sec_per_cluster %d
 clearing sector %d ~ %d (fat size = %d)
   clearing data: sd_write_sector error
   clearing data: emmc_erase error
    clearing done!
 android     NO NAME     FAT32       write the boot sector 1: sd_write_sector error
 write the boot sector 2: sd_write_sector error
 write the FSInfo sector 1: sd_write_sector error
   write the FSInfo sector 2: sd_write_sector error
   write FAT %d: sd_write_sector error
    FAT formating ok
   [FAT_ERROR] The file name <%s> is exist, change file name and try again
   [FAT_ERROR] invalid partition found (boot_ind: 0x%x)
  [FAT_ERROR] can not find FAT32 partition
  [FAT_ERROR] fat_find_partition error
  [FAT_ERROR] No M$-DOS partition found
 [FAT_ERROR] Read FAT failed.(0)
   [FAT_ERROR] Read FAT failed.(1)
   [FAT_ERROR] fat_get_next_cluster: allocate %d bytes for FAT table sector buffer fail!
  [FAT_ERROR] fat_get_next_cluster: read FAT table sector[%d] fail!
  [FAT_ERROR] Read FSInfo failed.
   [FAT_ERROR] BPB did not initialize.

 Searching free data sectors....
  [FAT_ERROR] FSInfo free cluster=%u
    [FAT_ERROR] Read FAT failed(2).
   [FAT_ERROR] Can not find enough free space(require:%d bytes)
  [FAT_ERROR] Free space of the storage is %d bytes
 [FAT_ERROR] update_FSInfo_fdb_eof, Read FAT error.
    [FAT_ERROR] update_FSInfo_fdb_eof, write FAT error.
   [FAT_ERROR] update_FSInfo_fdb_eof, can not find free FDB .
    [FAT_ERROR] fat_open_write_file: can not alloc heap for the file description!
 [FAT_ERROR] fat_open_write_file: load bpb fail(%d)
    [FAT_ERROR] fat_get_skip_cluster: allocate %d bytes for FAT table sector buffer fail!
  [FAT_ERROR] fat_get_skip_cluster: read FAT table sector[%d] fail!
  [FAT_ERROR] fat_read_file, reading SD error.
  [FAT_ERROR] fat_open_file: can not alloc heap for the file description!
   [FAT_ERROR] fat_open_file: load bpb fail(%d)
  [FAT_ERROR] fat_open_file: can not find %s
    emmc_create_mbr
    sd_read_sector eror
   MBR is not changed
    sd_write_sector eror
  [SD_UPDATE_ERR] sd_load_img_header: alloc memory failure, size:%d
 [SD_UPDATE_ERR] sd_load_img: alloc memory failure: size:%d
    [SD_UPDATE_ERR] sd_load_img: fat_read_file() failed, read %d bytes, file size = %d bytes
  [SD_UPDATE_ERR] Image[%s] in NBH has no corresponding partition...
    Checksum Checking...    INFOchecksum checking...    [SD_UPDATE_ERR] sd_update_device_buf, check sum...fail!
   INFOchecking model ID...    Jumping to DIAG...  Parsing...[downloaded NBH]  INFOstart image[hboot] flushing...  INFOstart image[radio] flushing...  INFOimage flushing...   Update is in progress...    Do not power off the device!    INFOstart image[%s] flushing... Checking Model ID...    NBH Header Checking...  INFOnbh header checking...  INFOshift signature_size for header checking... [SD_UPDATE_ERR] update_fb_NBH_buf: can not find NBH header
    NBH Header Parsing...   INFOnbh header parsing...   [SD_UPDATE_ERR] update_fb_NBH_buf: image check fail
  Update Fail!    Reading images...   Checking Signature...   [SD_UPDATE_ERR] sd_update_image, security check failed!
  Device halted due to fail!  Battery voltage is too low! Please change a battery...  [Power] -> Continue Loading...  [   [SD_UPDATE_ERR] sd_check_img: can not find NBH header
 [SD_UPDATE_ERR] sd_check_img fail
    No image or wrong image!    Parsing [ZIP_ERR] uninflate_singlefile(): file description is NULL!
    [ZIP_ERR] uninflate_singlefile(): allocate heap for centraldir parsing error!
  [ZIP_ERR] uninflate_singlefile(): read data for centraldir parsing error!
  [ZIP_ERR] uninflate_singlefile(): require more_cd_search_size(%d) again! (%d)
  [ZIP_ERR] uninflate_singlefile(): centraldir parsing FAIL again!
   [ZIP_ERR] uninflate_singlefile():
  [ZIP_ERR]   Finding [%s]: allocate heap fail!
  [ZIP_ERR] Can not find [%s] in zipped image!
   [ZIP_ERR] Unzipped [%s] fail!
  [ZIP_ERR] uninflate_singlefile(): allocate heap for loading extraFieldLength error!
    [ZIP_ERR] uninflate_singlefile(): read data for getting extraFieldLength error!
    [ZIP_ERR] uninflate_singlefile(): allocate heap for loading zipped data error!
 [ZIP_ERR] uninflate_singlefile(): read data for unzipping error!
   [ZIP_ERR] Unzipped [%s] fail! (ret=%d)
 INFOstart image[%s] unzipping for pre-update... [SD_UPDATE_ERR] Unzip [%s] for preupdate fail! (ret=%d)
    [SD_UPDATE_ERR] Partition[%s] update fail! (with hboot preupdate)
  [SD_UPDATE_ERR] Partition_update fail! (Type: STORED)
  [SD_UPDATE_ERR] failed to unzip image or update partition[%s]
  INFOstart image[%s] unzipping & flushing... Parsing...[downloaded ZIP]  Parsing...[SD ZIP]  [SD_UPDATE_ERR] Faile to find zip entry of image name[hboot]
  [SD_UPDATE_ERR] Unzipped [hbboot] for preupdate fail! (ret=%d)
 INFOstart image[hboot] unzipping for pre-update check...    [SD_UPDATE_ERR] Unzipped [hboot] for preupdate fail! (ret=%d)
  INFOimage[hboot] Platform check fail!   [SD_UPDATE_ERR] Partition[hboot] update fail! (hboot preupdate)
    android-info.txt    [SD_UPDATE_ERR] get_zip_images_info():
 [SD_UPDATE_ERR]   Finding [android-info.txt]: allocate heap fail!
  [SD_UPDATE_ERR] Read zipped android_info fail!
 [SD_UPDATE_ERR] Parse zipped android_info fail!
    [SD_UPDATE_ERR] Can not find [android-info.txt] in zipped image!
   [SD_UPDATE_ERR] Can not find Model ID in android_info file!
    [SD_UPDATE_ERR] Can not find Main Version in android_info file!
    [SD_UPDATE_ERR]   Parsing zipped image: allocate heap fail!
    No image!   Lack of heap!   Wrong image!    Wrong zipped image! Checking..  [SD_UPDATE_ERR] do_update_zip(): security check failed!
 (signature is not match)
 Parsing...  [SD_UPDATE_ERR] No image found in ZIP[%s]
 ZIP Header Checking...  INFOzip header checking...  [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP header
    ZIP Info Parsing... INFOzip info parsing... [SD_UPDATE_ERR] update_fb_ZIP_buf: no required image found in ZIP file
    .img    .nb0    .nb .jam    Please remove battery to reboot Press <POWER> to reboot.    Update Complete...  --------.---    ----IMG.nbh ----DIAG.nbh    ----IMG.zip ----DIAG.zip    --------.nbh    --------.dgn    --------.zip    --------.dgz    SD Checking...  Do you want to start update?    DREAM   [SD_UPDATE_ERR] Diag image error! (Platform check fail)
    INFOExecuting the MFG diagnose tool...  Jumping address 0x%X...
    Press power key to go back. Delete all user data?   Clear.....  Done.   Reboot after 5 seconds...   No free security board cmd table!
  No free board cmd table!

command list
  [ERR] Command error !!!

###[ Bootloader Mode ]###
      Wrong MAC argument!!    tick:%X
    Virt_Addr, Physical, MB
    ----------------------------------------------
 %X, %X, %d
 Total free heap size: %d Bytes (0x%X)
  Max. free heap segment size: %d Bytes (0x%X)
   usbtestmode: <value>
value=0 -> disable
value=1 -> enable
 Get g_cKeyCardSecurityLevel=[%d]
  Set Headset MIC OK
 Set Headset MIC NG
 backup MFG & MISC to eMMC
  no support
 emapiGPIOOut: Parameter number error!
 argv[%d]=%s
   emapiGPIOOut: wlmGPIOOut error!
   emapiGPIOOut: Set wifi IRQ pin failed!
    emapiGPIOOut OK
   cmd_emapiEtheraddr iArgs = %d
    Set MAC= %x %x %x %x %x %x
    wl version: %s
 error, please use emapiMpc 0
     crsuprs Manufacturing test: set carrier suppression mode.
  carriersuprs syntax is: crsuprs <channel>
   Arg is channel number 1-14, or 0 to stop the test.
    Wrong argument!!
   fqacurcy
   Manufacturing test: set frequency accuracy mode.
   freqacuracy syntax is: fqacurcy <channel>
  Arg is channel number 1-14, or 0 to stop the test.

start packet engine; usage: wl pkteng_start <xx:xx:xx:xx:xx:xx> <tx> [ipg] [len] [nframes]
    ipg: inter packet gap in us
    len: packet length
 nframes: number of frames; 0 indicates continuous tx test
  TX  tx  WL_PKTENG_PER_TX_START!!    TXACK   txwithack   WL_PKTENG_PER_TX_WITH_ACK_START!!   only support tx, txwithack  -o  -d  -q  -m  Error argument!
   cmd_emapiRateset iArgs = %d
  Returns or sets the supported and basic rateset, (b) indicates basic
   	With no args, returns the rateset. Args are
   	rateset "default" | "all" | <arbitrary rateset>
   		default - driver defaults
    		all - all rates are basic rates
  		arbitrary rateset - list of rates
    	List of rates are in Mbps and each rate is optionally followed
    	by "(b)" or "b" for a Basic rate. Example: 1(b) 2b 5.5 11
 	At least one rate must be Basic for a legal rateset.

 GetChannel failed
  Set Channel error
  eMapiVersion: Ver 1.00
 emapiInit Error


 Usage: savefb2sd <file name> [main|ruu]
     ex: savefb2sd fb.bmp main

 Usage: savemem2sd <memory offset> <length> <file name>
     ex: savemem2sd 85cd0000 2c000 mem.bin invalid parameters!
    <addr> is invalid!
 unsupported <width>
    failed to write. <addr> must be aligned
    failed to write. <value> is invalid
    memory dump
    %X:      -  %X: %B   %B | %s
    %B %X: %H   %H | %s
    %H %X: %X   %X | %s
    %X  | %s

 Usage: saveprt2sd <partition name> <-n> <file name> <-a>
     <partition name> - Partition name want to save
     <-n> <file name> - File name to store in(optional)
     <-a> - Save whole blocks even read empty page(optional)
     ex: saveprt2sd hboot hboot.bin
     (use listpartition command get all partition name)
   -a  -n
TP data

  %x
    argv[1][0]=%d
  BD_ADDRESS wrong format....should input %d parameters
  bdaddress command complete  Backup CID is <Empty>
  Backup CID is [%s]
 writebcid: Parameter error
 MB Serial No. is %s
    FAIL - partition name is too long   FAIL - partition is not existed!    FAIL - partition is not allowed to be erased!   FAIL - erasing partition[%s]
   OKAY - Partition[%s] has been erased
   Usage: erase [partition name]

    All supported names:
   =====================
  writemid: Parameter error
  battcheck: Parameter error
 Device Serial No. is %s
    Cmd writeserialno parameter error!!!
   Running in debug mode...
   Calculate hboot checksum
   Calculate recovery checksum
    Calculate boot checksum
    Calculate system checksum
  hboot    CRC checksum = 0x%x
  recovery CRC checksum = 0x%x
  boot     CRC checksum = 0x%x
  system   CRC checksum = 0x%x
  Wlan data header ++++++++++++++++++++
  Signature : 0x%x
   UpdateStatus : 0x%x
    UpdateCount : 0x%x
 BodyLength : 0x%x
  BodyCRC : 0x%x
 aDieId(0) : 0x%x
   aDieId(1) : 0x%x
   aDieId(2) : 0x%x
   aDieId(3) : 0x%x
   countryID : 0x%x
   Wlan data len: %d
  Wlan data body --------------------------
  %c   0x%x   Notice: This MAC address takes effect only when your platform is EEPRON-less configuration. Please use (emapiTest)  to verify it !
 [ERR] eMapiGetMacAddrOffset error
  The offset for MAC addr in NVS is: %d
  %s
    0x%X
  Wrong format...should have %d parameters
   %s:%s:%s:%s:%s:%s   Update Wlan header failed!
 Set wlan MAC ok
    Set wlan MAC failed.
   -eMapiWlanMacCommand, status = %d
  +emapiCountryID: WALN CountryID data
   Signature = 0x%x, Country ID=0x%X
 Wrong format
   Set wlan country id ok
 Set wlan country id failed.
    non-cached  [Error]! heap_test(%s) is terminated due to heap allocation failed!
    [heap list] (%d) start_addr=%x, len=%x
 [Obverse write] (%d) start_addr=0x%x, len=0x%x, seed=0x%x
  [Obverse read] (%d) start_addr=0x%x, len=0x%x, seed=0x%x
   [ERR] [ERR Reverse] (%d) ADDR=0x%x, write=0x%x, read=0x%x, seed=0x%x, pattern=0x%x
 [Reverse write] (%d) start_addr=0x%x, len=0x%x, seed=0x%x
  [Reverse read] (%d) start_addr=0x%x, len=0x%x, seed=0x%x
   [Free heap] start_addr=0x%x, len=0x%x
  time pass= %d us
   !!! RAM TEST FAIL !!!   PHY Addr=0x%X   WRITE=0x%X  READ=0x%X   Erase SD SD_WriteMultipleSectors ERROR!!!
  EraseSD Completed!!!
   EraseSD Initial SD failed!!!
   rbchk: invalid parameters
  usage: rbchk [partition | block]
     partition = <all|recovery|boot|system|cache|userdata>
      block     = block id in HEX format
   rbchk: invalid partition name %s
   rbchk: scan blocks from %d to %d
   block %d(0x%x) is bad
  rbchk: All blocks are good!!
   rbchk: Total %d bad blocks!!
   [ERR] tflash:write pages::Failed to write page %d
  [ERR] tflash:read pages::Failed to read page %d
    [ERR] tflash:erase pages::Failed to erase page %d
  ========== flash performance test ==========
   TEST %d: %s ... takes %d msec => speed = %s MB/sec
 ============================================
   Read NAND flash: Parameter error
   Read flash from page 0x%x (len 0x%x) to 0x%x...
    No enough memory for reading flash!
    skuid item:%s
index:0x%x, value:0x%x

 100
    skuid item:
index:0x%x, value:0x%x

   Read config: invalid config item/index
 read skuid index:0x%x, value:0x%x
  Read config: Parameter error
   Write sku id: Parameter error
  Write config: invalid skuid item/index
 write skuid index:0x%x, value:0x%x
 Read config
    Write config: Parameter error
  write config index:0x%x, value:0x%x
    Erase config: Parameter error
  Erase config: complete
 read test:
 ADDR:0x%x:  0x%x    write test:
    read/write test:
   (%s)========== SD card R/W test ========== #%d
 16:51:03    CheckError: #%d %X %X
  SD Init eror
  SD Read/Write Test fail..
  SD Read/Write Test OK!!
    performance test: %d us
    ram_test <start address> <length> <count> <mode>

   <mode>==0, do memory test with cache

  <mode>!=0, do memory test without cache

  COUNT=%d
   ram test:: addr=0x%x, len=0x%x
 < 1 byte access test, pattern=0x%x >
   write pattern to ram:: addr=0x%X
   read pattern from ram:: addr=0x%X
  [ERR] 1 byte access:: a:%x w:%x r:%x

< 2 byte access test, pattern=0x%x >
  [ERR] 2 byte access:: a:%x w:%x r:%x

< 4 byte access test, pattern=0x%x >
  [ERR] 4 byte access:: a:%x w:%x r:%x
   [ERR] !!! RAM TEST FAIL !!!
    Address      Value
 -------      -----
 %X      %H->       Input string too long, limit 2 bytes
   Input string too long, limit 4 bytes
   Input string too long, limit 8 bytes
   LnbDownloadImagetoRam Failed

 Usage: loaddiag <block number> <diag length> [loading address] [jumping offset]
  Read diag from block#%x fail
   Jumping address %x ........
    Can not allocate heap for flash_block_test
 ## Round %d: Block[0x%X]~Block[0x%X] ##
    #%d is an original bad block!
  ..Testing B[0x%X]~B[0x%X]
  #Flash page read error happens in Block[%d]!
   #Auto mark bad Block[%d]!
  #Block[%d] erase failed before testing!
    #Block[%d]-Page[%d] write failed during testing!
   #Block[%d]-Page[%d] read back failed during testing!
   #Block[%d]-Page[%d]-Offset[%d] compare error during testing!
    => test_pattern=0x%X, read_data=0x%X
  #Block[%d]-Oob[%d]-Offset[%d] compare error during testing!
    #Block[%d] erase failed after testing!
 #Block[%d]-Page[%d] write back failed after testing!
   Time cost = %d ms
  PASS rate = %d / %d = %d %%
    FAIL rate = %d / %d = %d %%
    Usage: partition_test <name>|all [auto_mark_bad_flag]
  Example: partition_test system [1]
 Testing Partition[%s]...
   Start partition testing...  [%s]:   Block[0x%X~0x%X]    Num=%d  Partition[%s] is not supported!
    Usage: block_test <start> <length> <rounds> [pattern]
  Example: block_test %X A 1 [776655AA]
  Specified blocks are out of NAND flash range!
  Parameter block_length and test_rounds can not be zero!
    FunctionSKUField    PCBIDField  RFSKUIDField_D0 RFSKUIDField_D1 RFSKUIDField_D2 RFSKUIDField_D3 RFSKUIDField_D4 RFSKUIDField_D5 RFSKUIDField_D6 RFSKUIDField_D7 SKUIDChecksum   EngineerID  mb  mh  mw  ew  eh  eb  mmu ram_test    jump    sdtest  eraseconfig writeconfig readconfig  writesku    readsku rflash  tflash  block_test  partition_test  rbchk   erasesd btrouter    tick    heaptable   emapi   emapiTest   emapiCountryID  emapiWlanMac    emapiSetDefCal  emapiReadCal    lr  imgcrc  resetautoimage  resetpreferdiag resetRUUflag    writeserialno   readserialno    battcheck   gotofastboot    gotohboot   writemid    usbtestmode eraseWifiFlash  erase   readmbserialno  listpartition   erasebcid   writebcid   readbcid    fmrouter    fmtx    resetuP bdaddress   wMfgTp  rMfgTp  emptypagecheck  saveprt2sd  savemem2sd  savefb2sd   emapiInit   emapiChannel    emapiBand   emapiRate   emapiRateset    emapiCountry    emapiTXpwr1 emapiPkteng_start   emapiPkteng_stop    emapiOut    emapiFqacurcy   emapiCrsuprs    emapiUp emapiDown   emapiMpc    emapiCounters   emapiVersion    emapiEtheraddr  emapinRate  emapiSetIrqPin  bkflash2emmc    fl  loaddiag    lnb init_a1026_fw   checkKeyCard    usbspeed    keytest heap    reset   powerdown   rebootRUU   heap_test    write pages      read pages    erase blocks    Chage CID command
  Start to do authentication
 Init SD failed!
    Start to change CID!
   Done!
  IMEI Data fail! [SIMLOCK_ERR] IMEI Data fail!
  Security Checking...    [SIMLOCK_ERR] Unlock SIM card by smart card fail!!!
    Unlock SIM card by smart card fail!!!   [SIMLOCK_ERR] Set security flag 0 fail!!!
  Set security flag 0 fail!!! SecurityLevel:%d    Clear Network code  UnlockCode=[%s] Network Code Count[%d]  [SIMLOCK_ERR] Write Network Code Error !!!
 >Write Network Code Error   Locktype check error    [SIMLOCK_ERR]  Lock: %d Locktype check error!   security type check error   [SIMLOCK_ERR]  security: %d type check error!   Device has been Simlocked!  [SIMLOCK_ERR] AssignHeadData: return false
 Process done, reboot device?    FUNKEY_POWERDOWN
   Wait for AMSS ready...  Wait for AMSS ready
    SD re-init fail !!!
    SD re-init fail !!! ###[ CDMA Cust Mode ]###
   %d: SD FAT32 init
  %d: SD FAT32 init fail !!!  %d: SD FAT32 init OK    Checking key-card...    Checking key-card...
   %d: Not key-card !!!    %d: Key-card    DMCID.dat   Open '%s' file success !!!
 hFile = 0x%x, file_size = 0x%x
 Read '%s' (%d != %d B)
 AT@CID= 0: Change CID to '%s'   4: Change CID to '%s'   Alloc data buffer fail  Open '%s' file fail ###[ End CDMA Cust Mode ]###
   cid.txt [SIMLOCK_ERR] Open CID file fail !!!
   Open cid file fail  Reading cid.txt [%d]Bytes   [SIMLOCK_ERR] sd_load_img: fat_read_file() failed, read %d bytes, file size = %d bytes
    Read CID file fail  Read CID file success   Security PASS!  Security type check error   [SIMLOCK_ERR]  Security: %d type check error!   [SIMLOCK_ERR] SD init fail !!!
 SD init fail !!!    FAT32 init OK   config.dat  [SIMLOCK_ERR] Open MCCMNC file fail !!!
    Open MCCMNC file fail   Reading config.dat [%d]Bytes    Read MCCMNC file fail   Read MCCMNC file success    Open CID file fail  Get device IMEI failed  Get device IMEI success IMEI checking...PASS!   IMEI checking...FAIL!   [SIMLOCK_ERR] IMEI checking...FAIL!
    Atod %s error!
 audioset@8
    --AT Interpreter Ready !
  --AT return 0 !
   --AT return OK !
  fmrouter switching audio path complete!
   Enter Radio Image
 Check: Wait interpeter timeout
    ERROR 1, dwRead=0x%x
   ERROR 2, dwRead=0x%x

 
start NB image download
  allocate imgbuf failed

DownloadNbToRam Error!!

Start flash image !
  start download
    Unknow/Wrong Image Type assigment! [0x%X]
  [CRC32] [%d|%d] %X
 #%d is bad block!!
 [CRC32] [%d] -----bad-----
 [CRC32] Block %d is out of partition, calculation STOP
 Complete checksum at page %d, read %d bytes
    ruu
SaveFrameBufferToSD: RUU(%d), start addr=0x%X,
 length=%d bytes, file name=%s
 Height=%d, Width=%d
    [S2S_ERROR] SD init fail.
  [S2S_ERROR] Invalid file name found. Try another name.
 [S2S_ERROR] Heap allocate for RGB transfer fail.
   [S2S_ERROR] fat_open_write_file fail.
  [S2S_ERROR] write_data_to_cluster fail.
    [S2S_ERROR] fat_close_write_file fail.

 [SaveFrameBufferToSD] Done.

SaveMemoryToSD start offset=0x%x, length=0x%x bytes, file name=%s
 [S2S_ERROR] Memory allocate function fail.(%dK bytes)
  [SaveMemoryToSD] %dM bytes saved

 [SaveMemoryToSD] Done.

SaveImageToSD partition file name:%s
SaveImageToSD output file name:%s
 [SAVE2SD]  partition [%s] start block=%d, end block=%d
 [S2S_ERROR] The partition size=0, no file to be saved.
 [SAVE2SD] Block %d is out of partition, read STOP
   [SAVE2SD] %u bytes saved.

 [SAVE2SD] Done.
  un-supported port number:%d failed to init port:%d  sending cmd to modem...
    starting UART router...
    €   [MDP] %s
   [MDDI_HW_ERR] %s: can not find valid client
    [MDDI_HW_ERR] %s: disable periodic rev encap fail
  [MDDI_HW_ERR] %s: ignore listen fail
   [MDDI_HW_ERR] %s: set new rev ptr fail
 [MDDI_HW_ERR] %s: cmd link active fail
 [MDDI_HW_ERR] mddi_send_rtd fail
   [MDDI_HW_ERR] %s: err = %d
 [MDDI_HW_ERR] crc error detected!
  [MDDI_HW_ERR] %s: send rtd fail
    [MDDI_HW_ERR] %s: no response?
 [MDDI_HW_ERR] mddi_remote_write fail
   [MDDI_HW_ERR] mddi_queue_image timeout!
    malloc failed return NULL pointer
  1.2.3   [ZIP_ERR] zerr=%d, Z_STREAM_END=%d, total_out=%d
 zmsg=%s
  [SD_UPDATE_ERR] unzip_file: alloc memory failure, size:%d
 UZ  [SD_UPDATE_ERR] Partition_partial_update fail!
 [ZIP_ERR] zerr=%d, Z_STREAM_END=%d, total_out=%d
 avail_in=%d, avail_out=%d
    incorrect header check  unknown compression method  invalid window size unknown header flags set    header crc mismatch invalid block type  invalid stored block lengths    too many length or distance symbols invalid code lengths set    invalid bit length repeat   invalid literal/lengths set invalid distances set   invalid literal/length code invalid distance code   invalid distance too far back   incorrect data check    incorrect length check  need dictionary stream end  file error  stream error    data error  insufficient memory buffer error    incompatible version    SA00    SuperCID    AT@AUX= AT@AUX  0.01    bt_router start!, move to send HCI configuration file!
    %s: detected=0x%x, panel_id=%d
 Go into fm router, switch the audio path!
 ATMEL224_   ATMELC03_   SYN3K_  Ace a1026    PVT     UNKNOWN     ENG     S-ON    S-OFF
EBI0 CS0 size = %d

EBI0 CS1 size = %d
    %s is finished: %s, %s
 16:50:56    Aug 20 2010 SYN3K   ATMEL224    ATMELC03    AKM8975 ISL29028    ATMEL_mXT224C12 MAXIM_DS2746    Error! PANEL type = %d
 [BOARD] %s ID0=%d ID1=%d
   SO  [BOARD] panel_id %d
    Error Panel id
 Dynasty 16:50:57    [Display] init SONY
    SH-C2   SO-C2   SH-C1   SO-C1   Go into fm router, please wait for command complete!
  FM TX start! Go to next step!
 SH  [Display] init SHARP
   ATMELC12_   Y   Glacier Error: Board >= XB but with uP version[%d]  Error: XA with uP version[%d]   ATMELC12    TMOUS nvram setting
    [BOARD] %s
 Vision  Error: Board > XC but with uP version[%d]   Error: XA/XB with uP version[%d]    <AP 3>
    <AP 2>
    <?>
   <AP 1>
    <WWW/.COM>
    Flyer   16:50:58    [ERR] %s: reserved NVS ram is too small
    dhdsdio_downloadvars fail %d
  error reading nvram file %d
   nvram parameter:%s removed
    [ERR] Fail to initialize sdio controller!
 [ERR] [WLAN]:(r)bcmsdh_abort fail- f%d addr 0x%x size 1 data 0x%x
    dhdsdio_probe_attach_sdio+
    dhdsdio_probe_attach_sdio-
    [ERR] assert: (%s)(%s) line :%d dhd_sdio.c  sd_clock    sd_mode sd_divisor  sd_blocksize    [ERR]  sdio error %d, abort command and terminate frame.
   dhd_bus_rxctl: polling time out !!  dhd_bus_rxctl: resumed on rxctl frame, got %d expected %d
  [ERR] dhd_bus_rxctl: resumed for unknown reason?
   [ERR]  dhdcdc_set_ioctl: unexpected request id %d (expected %d)
    CDC packet is pending!!!! cmd=0x%x (%lu) lastcmd=0x%x (%lu)
    wme_dp  dhd_ioctl_entry: BCME_NOTUP !
    cur_etheraddr   Dongles MAC address = %B:%B:%B:%B:%B:%B
    dhd_prot_init: read mac fail
  [ERR] dhdsdio_membytes transfer failed
    [ERR] dhdsdio_membytes: window change failed
  [ERR] dhdsdio_membytes: FAILED to return to 0x%x
  dhdsdio_download_code_array: error on writing %d membytes at 0x%x
 [ERR] Failure trying reset SOCRAM core
    Failed to find SOCRAM core!
    no vars written to RAM
 Can't change back to SDIO core?
    Failed to find ARM core!
   %s: Failure trying to reset ARM core?
  dhdsdio_download_state on failed
  dhdsdio_download_code_array failed
    dongle nvram file download failed
 aaa dhdsdio_download_state off fail
   [ERR] FAILED to return to SI_ENUM_BASE
    [ERR] dhdsdio_probe: ChipClkCSR access: err %d wrote 0x%02x read 0x%02x
   [ERR] dhdsdio_probe: si_attach failed
 [ERR] dhdsdio_probe: failed to find ARM core
  user: Restrict the dongle ram size to %d, min accepted %d
  [ERR] dhd_sdio_init fail.
  [ERR] emapiInit:error (bcmsdh_intr_disable fail)
   [ERR] %s: alloc page fail
  [ERR] %s: [1]partition read fail
   [ERR] The Reserve buffer length is not enouth for FW. recevice %d byte, need %d bytes
  [ERR] %s: [2]partition read fail
   [ERR] %s: BCM_NVRAM_BUF_LEN length(%u) is not enough
  sd_oobonly  sd_gpout    [ERR] Get NVS fail
 [ERR] emapiInit:error (download firmware fail)
 [ERR] emapiInit:error (dhd_bus_init fail)
  emapiInit ok
   emapiInit fail
 osh is already set....
 timeout on ALPAV wait, clkval 0x%02x
   si_doattach: si_core_clk_prep failed %d
    Found chip of unkown type (0x%08x)
 %s: Need to parse the erom again to find addr space %d
 ai_scan: Oops, PCI_BUS
 Don't know how to do AXI enumertion on bus %d
  CIA not followed by CIB
    Not enough MP entries for component 0x%x
   First Slave ASD for core 0x%x malformed (0x%x)
  SP %d has no address descriptors
  Missing descriptor for MW %d
   Master wrapper %d is not 4KB
   Missing descriptor for SW %d
   Slave wrapper %d is not 4KB
    Reached end of erom without finding END [   .5  (b) %d%s%s  wl_setoid failed = 0x%x oid=0x%x!
  pkteng  wlmPktengStop fail
     wlmPktengStop ok
 wlu_var_setbuf(%x) fail
   target wlmBandSet fail
     wlmBandSet %d ok
 target wlmChannelSet fail
  wlmChannelSet %d ok
  wlmOut fail
   wlmOut ok
 wlmDown fail
  wlmDown ok
    wlmUp fail
    wlmUp ok
   wlmFqacurcySet ch:0x%x val:0x%x
   wlmFqacurcySet fail
    wlmFqacurcySet ok
     wlmCrsuprsSet  ch0x%x val:0x%x
   wlmCrsuprsSet fail
     wlmCrsuprsSet %d ok
  default parsing "%s", too many rates specified, max is %d rates
    unable to convert the rate parameter "%s"
  b   unable to convert trailing characters    "%s" in the rate parameter "%s"
   NO  YES [%d] rs->rates: %d , basic: %s
 Bad Args: at least one rate must be marked Basic
   counters    Incorrect version of counters struct: expected %d; got %d
  ====== rx info ======
  rxdfrmucastmbss : %d
   rxackucast : %d
    rxdfrmmcast : %d
   ====== receive stat counters ======
    rxframe : %d
   rxbyte : %d
    rxerror : %d
   rxctl : %d
 rxnobuf : %d
   rxnack : %d
    rxnondata : %d
 rxcrc : %d
 rxbadds : %d
   rxbadcm : %d
   rxfragerr : %d
 ====== rx MAC counters ======
  rxbadfcs : %d
  rxmfrmucastmbss : %d
   rxcfrmucast : %d
   rxrtsucast : %d
    rxctsucast : %d
    rxdfrmocast : %d
   rxmfrmocast : %d
   rxcfrmocast : %d
   rxrtsocast : %d
    rxctsocast : %d
    rxmfrmmcast : %d
   rxcfrmmcast : %d
   rxbeaconmbss : %d
  rxdfrmucastobss : %d
   rxbeaconobss : %d
  rxrsptmout : %d
    ====== tx info ======
  txframe : %d
   txbyte : %d
    txretrans : %d
 txretrie : %d
  txretry : %d
   txerror : %d
   txackfrm : %d
  txallfrm : %d
  txbcnfrm : %d
  txchanrej : %d
 txctl : %d
 txctsfrm : %d
  txprshort : %d
 txfrag : %d
    txmulti : %d
   WLC_GET_BAND  fail
   WLC_GET_BAND  0x%x
   WLC_GET_RATE error 0x%x
  Current Rate: %d Mbps
 Scan in progress.
  current scan channel	%d
    No scan in progress.
   current mac channel	%d
 target channel	%d
  wlmMacAddrSet %s fail
 Setting country code using abbreviation: %s
   country wlm_country_set ok
 wlm_country_set error 0x%x
 [1]command error. %s -m [0..7]
 [2]command error. %s -m [0..7]
 nrate   %s fail
    WLC_GET_BANDLIST  fail
   WLM_BAND_AUTO
    WLM_BAND_5G
  WLM_BAND_2G
  wlu_iovar_setint fail
    a_rate  bg_rate mpc wlmMinPowerConsumption failed
  wlmMinPowerConsumption ok
  gpioout [ERR] gpiocontrol 0x%x gpioout 0x%x gpioouten 0x%x
  MAC address = %B:%B:%B:%B:%B:%B
   [ERR] wlu get nrate fail
   auto
   auto    fixed   mcs index %d stf mode %d %s
    legacy rate %d%s Mbps stf mode %d %s
   %s (%s/%d)
    bcmerror    No country set
 wlm_TXpwr1Get+
   qtxpower
TxPower is %d qdbm, %d.%d dbm, %d mW  Override is %s
  Off wlm_TXpwr1Get-
   [ERR] bcmsdh_rwdata fail (addr:0x%x, blknum:%d, blksize:%d)
  [ERR] bcmsdh_rwdata fail (addr:0x%x, blksize:%d)
 [ERR] [WLAN] %s: sdnow_cmd53_rw_reg size error
   dhd_io.c    [ERR] bcmsdh_send_buf fail (addr:0x%x, blknum:%d, blksize:%d)
    [ERR] bcmsdh_send_buf fail (addr:0x%x, blksize:%d)
   [ERR] bcmsdh_recv_buf fail (addr:0x%x, blknum:%d, blksize:%d)
    [ERR] bcmsdh_recv_buf fail (addr:0x%x, blksize:%d)
   [ERR] %s: bcmsdhsdio_set_sbaddr_window err: %d
 [ERR] %s: bcmsdhsdio_set_sbaddr_window error
   [ERR] %s: sdnow_cmd53_rw_reg error
 Mark Bad block: %d
 [ERR] Bad block found: %d
  [ERR] flash_write_page_oob failed(errno %d): page id %d
    [ERR] flash_read_page_oob failed(errno %d): page id %d
 [ERR] ECC error has been corrected(errno %d): page id %d
   [ERR] flash_write_page failed(errno %d): page id %d
    [ERR] flash_read_page failed(errno %d): page id %d
 [ERR] flash_init::FAIL to probe msm nand, errno %d
 %s: unsupported block address, 0x%x
    msm_nand_erase[1]: unsupported block id %d
 msm_nand_erase[2]: unsupported block id %d
 msm_nand: critical erase error, 0x%x
   msm_nand_erase: failed, block %d, status 0x%x
  msm_nand_write_oob: unsupported to, 0x%x
   msm_nand_write_oob: unsupported ops->mode, %d
  %s: unsupported ops->len, %d
   %s: unsupported ops->len, %d for MTD_OOB_RAW mode
  msm_nand_write_oob: unsupported ops->datbuf == NULL
    msm_nand_write_oob: unsupported ops->ooboffs, %d
   msm_nand_write_oob: failed to get dma addr for %x
  msm_nand: critical write error, 0x%x(%d)
   msm_nand_dm_write_oob 0x%X %d %d failed (%d)
   Read CFG0 = %X, CFG1 = %X
  [NAND ERR] Fail to allocate memory for NAND device driver
  [NAND ERR] could not save CFG0 & CFG1 state
    [NAND SCAN] CFG0 = 0x%x, CFG1 = 0x%x
   [NAND SCAN] Read NAND_EBI2_ECC_BUF_CFG: %x
 Found a supported NAND device
  NAND Id  : 0x%x
    Unsupported Nand, oobsize: 0x%x
   Buswidth : %d Bits
    Density  : %d MByte
    Pagesize : %d Bytes
    Erasesize: %d KBytes
   Oobsize  : %d Bytes
    [NAND SCAN] Use wide flash 16 bit
  [NAND SCAN] Use flash 8 bit
    CFG0 Init  : 0x%x
 CFG1 Init  : 0x%x
 ECCBUFCFG  : 0x%x
 [NAND ERR] Fail to init NAND device driver
 Unsupported Nand,Id: 0x%x
 %s: unsupported ops->len, %d for MTD_OOB_RAW
   msm_nand_dm_read_oob: failed to get dma addr for 0x%x
  msm_nand_dm_read_oob 0x%X %d %d failed (%d), correct %d bits
   [NAND ERR] Invalid buffer source, write address %x fail.
   Mark bad block %d failed (%d)
  DMOV channel %d: status %x, irq %x, result %x
  msm_dmov_enqueue_cmd(%d): start command, status %x
 msm_dmov_enqueue_cmd(%d), enqueue command, status %x
   Polling loop %d: status %x result %x
   Polling stop: channel %d, result %x, status %x
 Polling status on channel %d out of time...
    msm_datamover_irq_handler: DMOV_ISR %x
 msm_datamover_irq_handler id %d, result not valid %x
   msm_datamover_irq_handler id %d, result done %x
    msm_datamover_irq_handler id %d, flush, result %x
  msm_datamover_irq_handler id %d, error  , status %x, result %x
 msm_datamover_irq_handler: flush0 %X
   msm_datamover_irq_handler id %d, status %x
 dmov_exec_cmdptr(%d, %x) ...
   dmov_exec_cmd ERROR: result: %X
    [V=0x%x, ERR=0x%x, F=0x%x, TPD=0x%x]
   dmov_exec_cmdptr(%d, %x) done
  Send '%s' (%dB)
    Send '%s' fail (%d!=%dB)
   Read '%s' (%dB)
    Delay %d(us) for dpram command before goto AMSS...
 un-supported port number:%d
    invalid offset:%d
  MCP mono-die
  MCP dual-die
  mpu_nand_acpu_rw %x %x
 mpu_nand %x %x
 clock_config CLKRGM_SPI_CLK %d
 clock_config CLKRGM_MDP_CLK %d
 clock_config CLKRGM_MDP_LCDC_PCLK_CLK %d
   clock_config CLKRGM_MDP_LCDC_PAD_PCLK_CLK %d
   clock_config CLKRGM_MDP_PBDG_CLK %d
    clock_config CLKRGM_SDC4_H_CLK %d
  clock_config CLKRGM_SDC3_H_CLK %d
  clock_config CLKRGM_SDC2_H_CLK %d
  clock_config CLKRGM_SDC1_H_CLK %d
  clock_config CLKRGM_BTPCM_CLK %d
   clock_config CLKRGM_UART1_CLK %d
   clock_config CLKRGM_UART2_CLK %d
   clock_config CLKRGM_UART3_CLK %d
   clock_config CLKRGM_UART1DM_CLK %d
 clock_config CLKRGM_UART1DM_HCLK_CLK %d
    clock_config CLKRGM_USB_HS1_CLK %d
 clock_config CLKRGM_USB_HS2_CLK %d
 clock_config CLKRGM_USB_HS3_CLK %d
 clock_config CLKRGM_USB_HS1_PBDG_CLK %d
    clock_config CLKRGM_USB_HS2_PBDG_CLK %d
    clock_config CLKRGM_USB_HS3_PBDG_CLK %d
    clock_config CLKRGM_USB_HS1_CORE_CLK %d
    clock_config CLKRGM_USB_HS2_CORE_CLK %d
    clock_config CLKRGM_USB_HS3_CORE_CLK %d
    clock_config CLKRGM_I2C_CLK %d
 clock_config CLKRGM_I2C_2_CLK %d
   clock_config CLKRGM_QUP_I2C_CLK %d
 clock_config CLKRGM_I2S_CLK %d
 pmic_gpio_irq %x %d %d
 pmic_gpio_permission %x %d
 [RADIO_ERR]  Radio Buffer overflow !
   [RADIO_ERR] UnLockcode length %d error!
    AT@SIMLOCK=1,%x,%s
 [RADIO_ERR] >Enable SimLock %x error!
  AT@SIMLOCK=2,1,%s
  [RADIO_ERR] >Add Network Code error !
  AT@SIMLOCK?%x
  [RADIO_ERR] >List SimLock Code %x error!
   @NetworkCode:   AT@SIMLOCK=3,%x
    [RADIO_ERR] >Clear SimLock Code error !
    AT@SIMLOCK=7,%d
    [RADIO_ERR] >Set Security Flag error !
 AT@SIMLOCK?AA
  @secu_flag: [RADIO_ERR] >Get Security Flag error !
 @secu_flag:     AT@SIMLOCK=9,%x
    [RADIO_ERR] Unlock SimLock by SmartCard NG
 AT@SIMLOCK?40
  @SIMLOCK=   [RADIO_ERR] >Get SimLock error !
   @SIMLOCK=   AT@IMEI?
   [RADIO_ERR] >Get IMEI error !
  fota %X %X %X
  [RADIO_ERR] rlimage_cmd: command timeout! Stop waiting...
  HTCST   HTCSF   HTCS    setunlock_status
   radata %X %X
   nvdata %X %X
   rcdata %X %X
   rpdata %X %X
   [radio_update] Invalid image type to update(%u).    setunlock_enable
   setunlock_disable
  pmic_vreg PM_VREG_MMC_M %d
 pmic_vreg PM_VREG_WLAN_M %d
    pmic_vreg PM_VREG_BT_M %d
  pmic_level PM_VREG_MDDI_M %d
   pmic_vreg PM_VREG_MDDI_M %d
    pmic_level PM_VREG_AUX_M %d
    pmic_vreg PM_VREG_AUX_M %d
 pmic_level PM_VREG_AUX2_M %d
   pmic_vreg PM_VREG_AUX2_M %d
    pmic_vreg PM_VREG_USB_M %d
 pmic_vreg PM_VREG_RUIM2_M %d
   pmic_vib_on
    pmic_vib_off
   pmic_level PM_VREG_RFRX2_M %d
  pmic_vreg PM_VREG_RFRX2_M %d
   pmic_level PM_VREG_RFTX_M %d
   pmic_vreg PM_VREG_RFTX_M %d
    pmic_vreg PM_VREG_SYNT_M %d
    pmic_vreg PM_VREG_CAM_M %d
 GO2AMSS
    pmic_vreg PM_VREG_USB_3P3_M %d
 pmic_reset
 pmic_level PM_VREG_MDDI_M %x
   pmic_level PM_VREG_AUX_M %x
    pmic_level PM_VREG_AUX2_M %x
   pmic_level PM_VREG_RFRX2_M %x
  pmic_level PM_VREG_RFTX_M %x
   pmic_level PM_VREG_SYNT_M %x
   pmic_level PM_VREG_PA_M %x
 pmic_vreg PM_VREG_PA_M %d
  pmic_level PM_VREG_CAM_M %x
    pmic_level PM_VREG_GP4_M %x
    pmic_vreg PM_VREG_GP4_M %d
 pmic_level PM_VREG_GP5_M %x
    pmic_vreg PM_VREG_GP5_M %d
 pmic_level PM_VREG_GP9_M %x
    pmic_vreg PM_VREG_GP9_M %d
 pmic_level PM_VREG_GP10_M %x
   pmic_vreg PM_VREG_GP10_M %d
    pmic_level PM_VREG_GP13_M %x
   pmic_vreg PM_VREG_GP13_M %d
    pmic_level PM_VREG_WLAN2_M %x
  pmic_vreg PM_VREG_WLAN2_M %d
   pmic_level PM_VREG_LVSW0_M %x
  pmic_vreg PM_VREG_LVSW0_M %d
   buf_addr:%x,buf_size:%x,start_sector:%x
    The address  is over the address of bootloader ...
 update sector address '%x' failed ...
  Finish write sector address %x ...
 RUU first boot: %d
 shutdown    clear

 Usage: gencheckpt [boot|shutdown|clear]
     ex: gencheckpt boot   [gencheckpt] cmd & flag are erased.
    recovery
--gen_checkpt
--reboot=bootloader
 recovery
--gen_checkpt
--reboot=oem-78
 Enable QXDM: Parameter error
   task: Parameter error
  Format start
   Format end
 Format BINFS start
 System partition only can be formated while security is OFF
    Format BINFS end
   task %d is not supported
   Parameter error
    emmc_boot=%d, radio_emmc_boot=%d, radio_emmc_appsbl_order=%d
    parameter error,ex entpa2051 <PATH>, 1=SPKR,2=HP,3=Ring
    entpa2051 <AUD_EN_GPIO>; <PATH> must between 1~3
  %s is finished
    gpiow: Parameter error
 GPIO:%d value:%d
   parameter error
    L2_ACC_FUSE_0: %d
  L2_ACC_FUSE_1: %d
  A11S_CLK_CNTL : %x
 A11S_CLK_SEL : %x
  A11S_STANDBY_CTL : %x
  A11S_TESTCLK : %x
  A11S_CLK_ROOT_EN : %x
  A11S_CLK_ENABLE : %x
   A11S_CLK_INV : %x
  A11S_SLEEP_EN : %x
 A11S_CLK_STATUS : %x
   VDD_SVS_PLEVEL : %x
    usage: changeCid <CID>
 usage : ulpi <addr> <val>
  ulpi write: addr 0x%x, val 0x%x
    usage: i2ctest
 usage : i2cw DEVICE ADDR DATA...
   usage : LENGTH must <= 20
  usage : i2cr DEVICE ADDR LENGTH
    usage : LENGTH must <= 16
  > [%d] = %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x
   pmgpiow: Parameter error
   pmgpiow <idnex> <value>; <index> must between 1~40
    PMGPIO:%d value:%d
 pmgpior <idnex>; <index> must between 1~40
    gpior: Parameter error
 usage : qupi2cw DEVICE ADDR DATA...
    gpior: GPIO:%d value:%d
    ******************************
    CMD>mddiw [Address] [Data]
   mddir Address=0x%x value=0x%x   CMD>mddir [Address]
   gpiow   gpior   mddiw   mddir   clock   i2cr    i2cw    i2ctest ulpi    changeCid   read_l2_acc_fuse    qupi2cr qupi2cw pmgpiow pmgpior dgtest  entpa2051   emmc_boot   rtask   task    enableqxdm  __i2c_write(): %d bytes not transmit
   __i2c_single_write(): not transmit
 No i2c device specified, please add to board_xxx.c! i2c test ERROR!! name = %s
 Test %d times
  devices == NULL or devices_num <= 0 i2c_72xx_wait_write_buffer_clear(): failed [%x]
    i2c_72xx_wait_write_buffer_clear(): set last byte
  i2c_72xx_wait_write_buffer_clear(): %dus timeout [%x]
  i2c_72xx_start_read(): wrong slave_id %x
   i2c_72xx_start_write(): wrong slave_id %x
  i2c_72xx_wait_read_buffer_full(): failed [%x]
  i2c_72xx_wait_read_buffer_full(): %dus timeout [%x]
    i2c_72xx_wait_bus_not_active(): %dus timeout [%x]
  I2C_SCL Change to GPO error, ret %x
    I2C_SDA Change to GPO error, ret %x
    I2C_SCL change to ALT Func error, ret %x
   I2C_SDA change to ALT Func error, ret %x
   %s(): reset_reason=0x%X
   .disable_uart2= 1   0   .usb_h2w_sw=    .disable_sdcard=    diag.enabled=   .debug_uart=    smisize=    32  64  userdata_sel=%d     androidboot.emmc=   true    false   TAG:smi ok, size = %d
  TAG:hwid 0x%x
  TAG:skuid 0x%x
 TAG:hero panel = 0x%x
  TAG:engineerid = 0x%x
  TAG:mono-die = 0x%x
    Device was already locked!
 Lock successfully...
   Lock failed!
   Please disable the security before lock
    Device was already unlocked!
   Loading custom splash failed!
  Erasing userdata...
    recovery
--gen_checkpt
--reboot=oem-1F
 msm_mpu_emmc_protect: set write protection fail (from %s to %s)
    [ReadMicroPChecksum] I2C_ReadMultiBytes_fcn_7500 Failed!! Try again!! %d
   [WriteMicroPWithBuffer] I2C_WriteMultiBytes_fcn_7500_For_MicroP_Update Failed!! Try again!! %d
 [WriteMicroPISP] I2C_Write Failed!! Try again!! %d
 [WriteMicroPISP] I2C_WriteMultiBytes_fcn_7500 Failed!! Try again!! %d
  ERASE...
    *   |  NO MicroP image header!!

  Project code error!!

  Project name: %s
   Version: 0x%x
  Project code: 0x%x
 Checksum: 0x%x%x
   Type: 0x%x%x

  Not MicroP2!

  Downloading MicroP2!

  ResetMicroP2++, wm_microp2_reset_gpio=%d
   can't read microp2 version
 ResetMicroP++, wm_microp1_reset_gpio =%d
   Download Failed Last Time(ID=0x%x)
    ATMEGA_OLD_AP_CODE_VERSION_PROJECT is 0x%x
    ERASE Finish
  1st ATMEGA_ReadI2C_uP_RD = 0x%x
   2nd ATMEGA_ReadI2C_uP_RD = 0x%x
   Erase checksum error: 0x%x, CHECKSUM_ERASE_AT48: 0x%x, CHECKSUM_ERASE_AT88: 0x%x
  UPDATE Finish
 3rd ATMEGA_ReadI2C_uP_RD = 0x%x
   4th ATMEGA_ReadI2C_uP_RD = 0x%x
   Update checksum error: 0x%x, dwChecksumAPCode: 0x%x
   5th ATMEGA_ReadI2C_uP_RD = 0x%x
   Successful!!!
 Current uP version/Project is 0x%x
    can't read microp version
  Microp addr[0x%x], type[0x%x] not supported
    usb_setup_tx 0x%x %d
   usb_setup_ack
 USB cache push Err  This eMMC is not made from Micron.MID=%d.
  eMMC:MID=%d Prev=%d
    DATA_TIMEOUT
   TX_UNDERRUN
    DATA_CRC_FAIL
  sdcc_erase, CMD%d fail
    emmc sdcc_clr_write_prot fail card not ready
  emmc sdcc_clr_write_prot done
 emmc sdcc_clr_write_prot addr(0x%X) fail
  value = %x addr = %d
  [SD_HW_ERR] emmc sdcc_set_write_prot addr(0x%X) fail
  sdcc_cmd.cmd=%d driveno=%d
 eMMC: CMD%d fail
   SDCC_ERR_WRITE_FIFO[len=%d]
    cmd=%d cmd_arg=%x driveno=%d
   CMD%d:resp[0]=[0x%x]
   eMMC: write failed in CMD%d.
   SD: write failed in CMD%d.
 Error status=0x%x
  sdcc_read_fifo, cmd timeout!!
 [SD_HW_ERR] SD: read data fail and count is %d,%d
  [SD_HW_ERR] SD: read fail ..
   RX_OVERRUN
 START_BIT_ERR
  [SD_HW_ERR] SD: No device attached
 sdcc_init_memory_device done
   [SD_HW_ERR] SD: Failed to initialize the card.
 [SD_HW_ERR] failed to config memory device
 %s start_addr = 0x%X size = 0x%X
  emmc not support enhance userdata area configuration
  configured size is too large, the maximum value is %d
 emmc config hc erase group def fail
   emmc_config_hc_erase_group_def wait card ready fail
   emmc config partition attribute fail
  emmc config partition attribute done
  emmc config enhanced userdata area address fail
   emmc config enhanced userdata area address done
   emmc config enhanced userdata area enh_size_mult fail
 emmc config enhanced userdata area enh_size_mult done
 ext_csd_partition_setting_complete fail
   EXT_CSD ERASE_GRP_DEF         = 0x%x
  EXT_CSD PARTITION_SUPPORT     = 0x%x
  EXT_CSD PARTITION ATTRIBUTE   = 0x%x
  EXT_CSD PARTITION SET_COMPLETE= 0x%x
  EXT_CSD MAX ENH_SIZE_MULT     = 0x%X
  EXT_CSD ENH_SIZE_MULTI        = 0x%X
  EXT_CSD ENH_ADDR              = 0x%x%x%x%x
    [SD_HW_ERR] emmc config user write protection fail card not ready
 [SD_HW_ERR] emmc config user write protection fail
    Get ext-csd register info fail
    emmc set protection command fail
  emmc config user write protection type fail
   [SD_HW_ERR] read data fail in CMD%d
    [SD_HW_ERR] SD: Read data fail..
   %s(%d): (id=%d, code=%d) not supported function!
  SDHW_GetControllerNo : Unknown SD device
 [ERR] %s: error resonose type
  [ERR] %s: blknum || blkmode error
  [ERR] %s: sdio_send_cmd 53
    [ERR] %s: err=0x%x
    [ERR] %s: error command %d  [ERR] %s: command 52 error
 [ERR] buf == NULL
  [ERR] %s: write error, func:%d, i: %d, len, :%d, rc: %d
    [ERR] %s: read error, func:%d, i: %d, len, :%d, rc: %d
 [ERR] command 0 error
  [ERR] command 5 error
  [ERR] command 3 error
  [ERR] command 7 error
  Program Firmware Image...   emmc_init ok!
  emmc_init_fail!
    EBR list is empty!
 ext_start_sect = %d, ext_nr_sects=%d

  appsbl_order = %d, ebr_count=%d

   type	br_start	ebr_sz	part_start	part_sz
   ebr[%d]: 0x%x 0x%x 0x%x 0x%x 0x%x
  emmc_init failed in %s
    write EBR to Sector %x for EBR %d: %x+%x -> %x
    %s eMMC inital fail

Available eMMC Sector = %d
    %s invalid command format
  ext_csd allocate fail
  ============ EXT_CSD REG [511 : 0] ============
    0%x     %x
0%x
%x
================= EXT_CSD REG ==================
  cmd_send_wp_info_emmc eMMC inital fail
 eMMC write protection group size = %d
  @@ eMMC init fail

Manufacturer ID, MID=%x
   eMMC should be Hynix's
 eMMC should be Micron's
    Maximal sector no: %d
  alloc_cache_page_aligned failed!
   erase sector %d ~ %d (%d)
  %s(%d): sd_write_sector failed!
    %s(%d): sd_erase_sector failed!
    Invalid parameter
  command format: %s [wp_start] [CMD31?]
 cmd_send_wp_info_emmc fail
 Next 32 write protection groups:
   0x%x    command format: %s [enh_start] [size]
  enh_start : write protection group size alignment address
  size      : number of write protection group size
  %s 0x%X 0x%Xok, need reboot!!
  command format: %s [wp_start]
  eMMC inital fail
   eMMC FW_CLR_WRITE_PROT faill
   eMMC FW_CLR_WRITE_PROT done
    command format: %s [wp_start] [wp_type]
    eMMC FW_SET_WRITE_PROT_GROUP faill
 eMMC FW_SET_WRITE_PROT_GROUP done
  command format: %s [start] [end]
   Sector Erase done
  Sector Erase fail
  command format: %s [start] [num] [iterations]
  writing sector %d ~ %d, value 0x%x
 write sector fail num = %d r_sector = %d
   write patter 0x%x done
 start to read and compare
  compare mismatch at sector %d
  reading sector %d fail
 %dth test finished and ok
  emmc test done
 command format: %s [start] [#blocks] [#blocks/read] [show]
 block per read: [#blocks/read] should > 0
  reading sector %d ~ %d
 reading secotr error leave %d sectors

read sector done average = %d
 command format: %s [len] [start]
   partition_read_emmc failed!
    addr=0x%x, len=%d, start_set=%d
    index, type, start, num
    %d, 0x%x, 0x%x, 0x%x
   command format: %s [start_partition] [end_partition] [type]
    eMMC initial fail
  eMMC set write protection test fail
    command format: %s [start] [#blocks] [blocks/write] [hex value]
    block per write: [#blocks/write] should > 0
    writing fail leave sector = %d
 wrting sector done average = %d max_ttw = %d min_ttw = %d
   time [%d ~ %d] = %d
  emmc_reinit ok!
    emmc_reinit fail!
  %s [sector per cluster] [start sector] [sector number]
 - erase_emmc - S
   Step1 - CMD35:S
    Erase eMMC fail[1]
 Step2 - CMD36:S
    Erase eMMC fail[2]
 Step3 - CMD38:S
    Erase eMMC fail[3]
 delay 10 seconds...
    Step4 - CMD13:S
    Erase eMMC fail[4]
 - Erase Micron eMMC: Done!
 - Erase Micron eMMC: Fail!
 command format: %s [index] [type] [start] [num]
    eMMC init fail
 emmc_set_partition failed!
 Sandisk Hynix   Micron  samsung unkonwn fdisk_emmc  set_partition_emmc  erase_emmc  test_emmc   sector_erase_emmc   fat_format_emmc init_emmc   reinit_emmc write_emmc  set_wp_emmc write_prot_test clear_wp_emmc   set_enh_area_emmc   list_partition_emmc load_emmc   check_emmc  check_emmc_mid  read_emmc   get_wp_info_emmc    send_wp_info_emmc   get_ext_csd_emmc    get_sector_info_emmc    Generic GetCpuGpio %d error !   gpio_clear_interrupt gpio=#%d
 gpio_clear_interrupt dwShiftBits=%x
   gpio_clear_interrupt pGpioSh2Regs->gpiosh_int_clear_1=%x
  [GPIO]Clear GPIO Interrupt error, GPIO number is %d
   [GPIO]Enable_VIC_Interrupt error, dwIntrSrc is %d
 [GPIO]gpio_pl_set_interrupt_trigger error, GPIO number is %d
  Enable GPIO Interrupt error, GPIO number is %d
    ERROR set_gpio_owner, num=%d
   Get GPIO error, GPIO number is %d
  Set GPIO error, GPIO number is %d
  Config GPIO error, GPIO number is %d
   pSuspendPinConfig = %x  config GPIO by the settings from DIAG. Done.
ERROR:  SPI_ERROR_FLAGS=%d
    %s(): Invalid data width!
  wimax   htcdata radio_reserve   fat
 turn off the flashlight


 turn on the flashlight for %d sec
    [MDDI_NOV] %s
  %s(): gpio_num=%d, warning vin_sel=%d
  Tx A1026 Exe Cmd error
 A1026 Read Exe cmd ACK error (%d)
  A1026 exe_retry cnt = %d
   A1026 Exe Cmd ACK NG
   A1026 Invalid input case number
    A1026 suspend success
  A1025 suspend fail
 failed to get a1026 firmware from MFG partition
    A1026 set boot mode error
  A1026 read boot mode ACK error
 A1026 failed to set boot mode
  Tx A1026 img error (retry = %d)
    A1026 Tx Sync Cmd error (retry = %d)
   A1026 Read Sync cmd ACK error (retry = %d)
 A1026 polling_retry_cnt = %d
   A1026 Sync Cmd ACK NG (retry = %d)
 A1026 Boot Up Init Completed!
  A1026 Fatal Error!!! Cannot load a1026 firmware image
  failed to store a1026 to MFG partition
 codec_tx_route=%d

codec_rx_route=%d

 start init

SPI_IO_CONTROL = %X
   SPI_CONFIG = %X
    QUP I2C reset fail
 QUP_I2C_STATUS != QUP_I2C_MAST_GEN
    __i2c_read(): error
    %s: timeout, status %x
 à         ªªªªªªªªîîîîîîîîþÿÿÿÿÿÿÿÿÿÿÿ¿ßï÷ûýü~¿ßï÷ûý~¶Î ;  
´;   Ô; 
è;  < <  <         0<  
D<   Ô; 
è;  < <  <          ;  
D<   Ô; 
è;  < <  <         
   @´ÿ 


  	  

 €€	  ÿB @  
@  h t c ,   I n c   A n d r o i d   1 . 0 d e f a u l t 	0 0 0 0 0 0 0 0 0 0 0 0   
   @´” 


  	  

 €€	  ÿB   
 
4ThK|KK¨K¸K´¿ÜKäKìKüKLL,LDLXLhLxL´LÔLèL    LYTY    `YdY
   pYtY
   €YˆY    ”YœY    ¨Y°Y    ¼YÄY    ÐYÔY    àYèY    ôYøY    ZZ    Z Z    ,Z<Z    HZTZ    `ZlZ    xZ„Z    Z Z    ¬Z¼Z    ÈZÔZ    àZðZ    üZ[    [0[    <[P[    <[TZ    \[p[    |[Œ[    ˜[¬[    ¸[È[
   Ô[ä[    ð[ø[    \\    \,\    8\D\    P\\\    h\t\    €\\    œ\¬\    ¸\Ä\    Ð\Ü\    è\ô\     ]]    ] ]    ,]4]    @]D]    P]T]    `]p]    |]Œ]    ˜]¤]    °]¸]    Ä]Ð]    Ü]è]    ô] ^    ^^    $^0^    <^H^    T^`^    l^t^    €^^    œ^^    ¬^´^    À^^    Ô^è^    ô^^    __    _(_    4_D_    P_`_    l_x_    „_”_     _¨_    ´_Ä_    Ð_Ø_    ä_ì_    ø_`    ``    $`,`    8`@`    L`T`    ``h`    t`|`    ˆ`˜`    ¤`¨`    ´`¸`    Ä`Ô`    à`ì`    ø`a    aa    $a,a    8aDa    Pada    pa„a    a˜a    ¤a¬a    ¸a¼a    ÈaÐa    Üaäa    ðaøa    bb    b,b    8b@b    LbPb                Xb|`    ˆ`˜`    ¤`¨`    ´`¸`    P]T]                      macaddr=00:11:22:33:44:55
sromrev=3
vendid=0x14e4
devid=0x432f
boardtype=0x4b9
boardrev=0x32
boardflags=0x200
xtalfreq=37400
aa2g=1
aa5g=0
ag0=255
pa0b0=6003
pa0b1=64086
pa0b2=65195
pa0itssit=62
pa0maxpwr=68
opo=16
mcs2gpo0=0x6666
mcs2gpo1=0x6666
rssismf2g=0xa
rssismc2g=0xb
rssisav2g=0x3
bxa2g=0
ccode=ALL
cctl=0x0
cckdigfilttype=0
ofdmdigfilttype=1
rxpo2g=0
boardnum=1
nocrc=1
otpimagesize=182
hwhdr=0x05ffff031030031003100000
RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
sd_gpout=0
sd_oobonly=1
 
   ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        ,¨        Dgà¿       ´jN
      ÀjB       ÌjÔj       Øjàj
      äjðj      üjk      PgPJ      @AÔ¿      kðM      kk       k$k       (k0k
      8k@k      HkøM      HkTk      ¸N\k      hk˜K
      pk°K       xk„k      ˆk”k      œk¨k       ´kÀk!      ÌkÐL"      ÐkÜk
      èkôk      ll       l(l      0l8l      @lHl      Pl,À      \ldl            
   

       ƒ       À     ƒ   À  @          ð?Ó                                                                             o                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   $™,™4™8™    --------.---    --------.---    --------.---    --------.---    --------.---    nv.img  @   #[Y»`üñ«&Fš/ÿ³÷æ"ŸñF#§'O#”ôzZo[¾öàs\›1°—5㇈¹…çe=­[ß0éÀ(JŠ$¿}gÉ·uHB”´î¥-yØBvé6Á©XÜPH pù3+&’Û5cd…Ã{
ª´¸}k\qtÄêÇ:ÕqÇÀZL£¯
9Ôñ;˜Œ¿Â†Q	¢S#¹[^#6Ý4¼´9I‹Žú:sç1ßÞw~“Ð=ö¡Oæ»lÿL!FäT¡&	7¿áG¼"ÎzNþ»óöôÛ\M£F5.|hZ5¼GîyZÖ&€*N°p¨“ß3ïCšîåøÁ°–Ü)¶€P‚سœ^ã­ÿ]d=".Õ̘1ÖE„;I¹.À}4šƒªHÈ´Kàïƒd R[Š|Ïàçeá9J››Ë¶O±…œ6Þ°¢éeœÔ5J÷	çšîoœêN”x¨<ÈíÀV%#JÅ|ŠàÍ5u
+»qóÔ(´ÎtÇðÝñßÓ4Lð~Ž¢t2+ÃÅ«AC³ÚœQ‰ktYÚKÿQ. Bø+S|Þ‚¾BÄ@È"rYf›†À•!E?Þس·Û"kú‡Uý·½¡t¯ÏÍ6€Ð?ÈpOí>T €”ü
ȘÚçqÝ¿0Y×ágë€NüÛŒq@   !­&Ééþj[£² 8®›ß™™rþ<}r™?” &xŽÐ¢ÈçiŽÌìÞo÷škÄ3UGâ¹Ê»ÈT
TjgõÛHw(ɘ޿Od%³
HX$¸ÃÝlÚDÔ́þßXñBmnÀd/.7g:	1;Ø”zÈf¤ „ò³,씦æY3jî—€à2P
"PóJÜçГêÉ0ãÚÃʏϾŽ8¾Â‰N¡8ð†!õF¸rL¾CÂxµ0²¿¨gâñVæÓ¢þä¸dK=èçC©w>ÙÿY5™»æl§
§nxÓkͨ¼è¨ŒÿâëlÍ>>%ØÙàbÇí±$ÆÞ“Ö‰¹ÜÌù’áÌ
è¦`ô·Ìû»°SЕmefž‘T}¢>¹ã]A/æö-=Ï~bzp-ò¦z•¹²Þ	a½¸þ”ÂNòBjqo.jÕóê­s¸Ù4í	으YÆs›Î9îZâí>·3v9eÁƒ%}ù…eé™®oý9q¤ðRƒÛ,­²âR¡§ÔÔh…áÚ„äéI„ïÓÚUp¤W•ÝN¡‹§
w¬/vÄü½@óe‹ ·áç`ù÷,§9nø¯­ú–BCüwóÈlCý˜³—Y<BÄY™s¿dduC–Òãz*S0æKŒvM
Fÿ   <˜

hboot> 
   D¾»
H¾ »
L¾ðº
P¾(ë
T¾é
X¾ðæ
\¾D¥
`¾xÞ
l¾¨ü
d¾LÞ
t¾˜Û
|¾dÛ
ˆ¾äÚ
”¾,Ú
 ¾0Ù
¬¾Œ×
´¾ÌÖ
¼¾Ò
Ä¾ˆû
Ð¾ø
à¾\Ð
è¾ÈÏ
ð¾ ¾
ü¾$¥
¿(É
¿¨
¿ì§
$¿@È
4¿`Å
D¿0Å
T¿¤Ã
d¿,î
h¿˜Â
p¿„Â
€¿lÂ
¿DÂ
 ¿Â
°¿èÁ
À¿ˆÁ
Ì¿hÁ
Ü¿HÁ
è¿Á
ô¿Œ¦
 ÀüÀ
ÀÈ¾
À¨¾
(À˜¾
8À€¾
DÀL¾
PÀ¾
\Àð½
hÀà½
pÀÌ½
xÀD½
„Àœ¼
ŒÀ\¼
”ÀP¼
¤À »
°À³
¼ÀÀ²
ÈÀ„²
ÔÀ²
äÀÔ±
ðÀ\±
üÀ¤°
Ál°
ÁL¯
(Áô¬
<ÁÔ¬
PÁt«
\Á,¬
lÁ«
|ÁX«
„Á<«
Áøª
œÁÜª
¬Áœª
¼Á4©
ÌÁü¨
ØÁ4¨
èÁÔ§
øÁÀ§
üÁí
ÂÜì
|§
ÂL§
,ð¦
        8€¦
@<¦
Ô¿Ìü
Hè¥
P¼¥
\¦
hLÉ
        AT@CID=12345678
    
   ÿÿc AT-Command Interpreter ready    
   
       lZ           øek    Xfk
   AT@SECURITY=    @SECURITY:  80(  91)!	
:2*"
;3+#>6.&=5-%
<4,$

 	
(3$.6'2, /+0&7!4-)1#91)!	
;3+#=5-%
?7/'80(  :2*"
<4,$>6.& 


 


	 

	
  


		

 

	
 
 


	
 

	


 
 	


	 


 	




 	
 


	 


 

	 


	


 	


	 

 
	




	
	 



	

 	

 
 
	




 	
 	




	 


	 
	 




 	


	  	


'/7?&.6>%-
5=$,4<#+3;"*
2:!
)	19  (08
   åÎjÖTúù…õ[;úiÈÙ‡‹Hã<Aˆ¡†Ã”çB£”%rjžÅRË°4‘_?0>­…¿@ãu€tùbmèPqûå¤äÞ-2ŁcltcF‘Xa	tü1fâf"„Ròú†é›$#P”W³ÕÔÃ÷Qc½’ÔtR¹ò°'Õá„5Æ×F2(âÔÊõ%Æø@ hüÓ§jcð¹þ~®„0123456789ABCDEF™meXÐyñè.¦LÄj⅏g<´kv÷×ÕÑÁÔ’¥Ã×ÕÑÁÔ’¥Ã”ݤˆÇҒɳ—Á’¬Å‘̳ÓÍÁÇØ”¨ÁÒ‘ÃÙ©¤¬’Î’ÕÚɬÅÖÅ“°‘ÏÓÌÕÆ”«²Õ¡¤—Á•¦—Õ’‘§ÕÖÕ³¤•ÑÙ”ªÅÌɘҢ—­ÏÉÁ—ÕÓ¥°ÁÌ’ÉËǨ³¬ÉÓ‘Íö«¶ËÆ™·Ð®Å¹Ã¡³’ÈÁÐÕÚ¡Ã’ÈÁÐÕÚ¡ÃÒ“ÏÒά¡ÄԔɑϪÉÔ¢–ºÇ¢Å¦É‘Á—®¨ÁÊϬĘϤÍĪ”řʖ°ÂÉ̐¸’ӢĘ¥¡²“֓Ź±Á’×Ô¨–×ÒÚÑ•«™ÄԳţΘ”®ÙÄΦˑ±ÓÊڵթȐ´ÎÖ֬Œ·ÅϸԯºÎÙÎÕ·˜ÔÁ¦”ÎÕ·˜ÔÁ¦”ÁλÁÕÏξғΐÖÕ”Á¡”¢“£¤ÎÉãԕËÖ֓Ϥ¶ÉÎÊÕ•ª¥×ÅÑÓÁ–ɦѣÔË™Á¦ÙÌ”×ÒÔºØÓ—“֩ŲУ¡–¬ÁÍ“¤É™Î¯Ìƴʐ§Á²ÈØÇ”ªÏõ±Â·Ä’­Ò¸²ÉÁÄ°ª‘Òmacaddr=00:11:22:33:44:55
sromrev=3
vendid=0x14e4
devid=0x432f
boardtype=0x4b9
boardrev=0x36
boardflags=0x200
xtalfreq=37400
aa2g=1
aa5g=0
ag0=255
pa0b0=5514,5514,5593
pa0b1=64257,64257,64287
pa0b2=65283,65283,65328
pa0itssit=62
pa0maxpwr=74
ofdmpo=0x88888886
mcs2gpo0=0xAAAA
mcs2gpo1=0xAAAA
rssismf2g=0xa,0xa,0xa
rssismc2g=0xb,0xb,0xa
rssisav2g=0x3,0x3,0x3
rcal_flag=0x61
bxa2g=0
ccode=ALL
cctl=0x0
cckdigfilttype=0
ofdmdigfilttype=1
rxpo2g=0
boardnum=1
nocrc=1
otpimagesize=182
hwhdr=0x05ffff031030031003100000
RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
sd_gpout=0
sd_oobonly=1
    H׍ 
  TP׍   ¨\׍   ¨                 h׍   p׍ˆ   pkÌ0  |׍”   Œ×L   ðŒñ    èðmacaddr=00:11:22:33:44:55
sromrev=3
vendid=0x14e4
devid=0x432f
boardtype=0x4b9
boardrev=0x36
boardflags=0x200
xtalfreq=37400
aa2g=1
aa5g=0
ag0=255
pa0b0=5514,5514,5320
pa0b1=64257,64257,64216
pa0b2=65283,65283,65155
pa0itssit=62
pa0maxpwr=74
ofdmpo=0xAAAAAAAA
mcs2gpo0=0xAAAA
mcs2gpo1=0xAAAA
rssismf2g=0xa,0xa,0xa
rssismc2g=0xb,0xb,0xa
rssisav2g=0x3,0x3,0x3
rcal_flag=0x61
bxa2g=0
ccode=ALL
cctl=0x0
cckdigfilttype=0
ofdmdigfilttype=1
rxpo2g=0
boardnum=1
nocrc=1
otpimagesize=182
hwhdr=0x05ffff031030031003100000
RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
sd_gpout=0
sd_oobonly=1
    P׍   P-\׍   P-                ,<ðŒñmacaddr=00:11:22:33:44:55
sromrev=3
vendid=0x14e4
devid=0x432e
boardtype=0x4ff
boardrev=0x19
boardflags=0x200
xtalfreq=37400
aa2g=1
aa5g=1
ag0=255
pa0b0=5939,5939,5112
pa0b1=64096,64096,64229
pa0b2=65195,65195,65081
pa0itssit=62
pa0maxpwr=78
ofdmpo=0xCC888888
mcs2gpo0=0xCCCC
mcs2gpo1=0xCCCC
cckdigfilttype=0
ofdmdigfilttype=1
pa1lob0=6110
pa1lob1=64080
pa1lob2=65245
pa1b0=6867
pa1b1=63891
pa1b2=65306
pa1hib0=5871
pa1hib1=64126
pa1hib2=65222
pa1itssit=62
maxp5g=50
maxp5gl=50
maxp5gh=50
ofdm5gpo=0x22222222
ofdm5glpo=0x22222222
ofdm5ghpo=0x22222222
mcs5gpo0=0x22222222
mcs5glpo0=0x22222222
mcs5ghpo0=0x22222222
rssismf2g=0xa
rssismc2g=0xb
rssisav2g=0x3
bxa2g=0
rssismf5g=0xa
rssismc5g=0xa
rssisav5g=0x3
bxa5g=0
ccode=ALL
cctl=0x0
rxpo2g=0
rxpo5g=0
boardnum=2048
nocrc=1
otpimagesize=182
hwhdr=0x05ffff031030031003100000
RAW1=80 02 fe ff
sd_gpout=0
sd_oobonly=1
  P׍   HQ ٍ   HQ                |hðŒñ    èðmacaddr=00:11:22:33:44:55
sromrev=3
vendid=0x14e4
devid=0x432f
boardtype=0x4b9
boardrev=0x36
boardflags=0x200
xtalfreq=37400
aa2g=1
aa5g=0
ag0=255
pa0b0=6003,6003,5576
pa0b1=64086,64086,64172
pa0b2=65195,65195,65155
pa0itssit=62
pa0maxpwr=82
mcs2gpo0=0xCCCC
mcs2gpo1=0xCCCC
rssismf2g=0xa,0xa,0xa
rssismc2g=0xb,0xb,0xa
rssisav2g=0x3,0x3,0x3
rcal_flag=0x61
bxa2g=0
ccode=ALL
cctl=0x0
cckdigfilttype=0
ofdmdigfilttype=1
ofdmpo=0xCC888888
rxpo2g=0
boardnum=1
nocrc=1
otpimagesize=182
hwhdr=0x05ffff031030031003100000
RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
sd_gpout=0
sd_oobonly=1
    macaddr=00:11:22:33:44:55
sromrev=3
vendid=0x14e4
devid=0x432f
boardtype=0x4b9
boardrev=0x36
boardflags=0x200
xtalfreq=37400
aa2g=1
aa5g=0
ag0=255
pa0b0=6003,6003,5576
pa0b1=64086,64086,64172
pa0b2=65195,65195,65155
pa0itssit=62
pa0maxpwr=78
mcs2gpo0=0xAAAA
mcs2gpo1=0xAAAA
rssismf2g=0xa,0xa,0xa
rssismc2g=0xb,0xb,0xa
rssisav2g=0x3,0x3,0x3
rcal_flag=0x61
bxa2g=0
ccode=ALL
cctl=0x0
cckdigfilttype=0
ofdmdigfilttype=1
ofdmpo=0xAAAAAAAA
rxpo2g=0
boardnum=1
nocrc=1
otpimagesize=182
hwhdr=0x05ffff031030031003100000
RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
sd_gpout=0
sd_oobonly=1
    P׍   \„ ٍ   \„                <˜ðŒñ    èð@   ™ËQW‘À

`®BtÄ»×Dí!¿„W–€1TA–(®å1¨Ûé.x)A6]”Ãlvzáë	íAb¯°*@¾a[:_MåL®2­Än~ÃFÇ^ üSÆþCküVÀùü&b´$½ß×áG`–JÈÐåjcù)àç9ßü½Ú>Ev±òŠõ1¹++_Æ7;Ï4¢VÜ€Û¾˜ø~c¡(ÛžˆkHZí¨>õŽÛñz•í3@zjsq)Ìè
⯜äÑöì/Ʀ@N—éÎ[ÆFçX^îäPŸ`“‘ݼ›§÷5o?¥¡â}Ë8Ú%)\ŠôÐÖÊÞ®"€:µ\5‹MxÜËïÄûË _w‘Jo!'çAÞHˆ¼®r*†«ø»•6ö;!IT÷ðjì¬Mí³ö-¦!ºãüËéŠáýõ©!Ò™­]iÓyü
sþÃë=éítµ›†‰ô»ªÃ Ý!V`ô²I¥ry±Ùžaå\µs“â=|~ªÈmÆŽ–yüÞO@íÉzuA³ïÈ“GŽ£	Bû«YŠI7QŽˆv3‰Î³‰TŠx}ázqŸú9Ì… Ö¸TÐÊ8u¶FðëíÆÛôó‘Í0¹ñ^éOo9ù_(ªˆt2JëÀoÅî"#hOp~øŒ¾ßÔY¹…#Öçmacaddr=00:11:22:33:44:55
sromrev=3
vendid=0x14e4
devid=0x432f
boardtype=0x4b9
boardrev=0x36
boardflags=0x200
xtalfreq=37400
aa2g=1
aa5g=0
ag0=255
pa0b0=5514,5514,5593
pa0b1=64257,64257,64287
pa0b2=65283,65283,65328
pa0itssit=62
pa0maxpwr=74
ofdmpo=0xAAAAAAAA
mcs2gpo0=0xAAAA
mcs2gpo1=0xAAAA
rssismf2g=0xa,0xa,0xa
rssismc2g=0xb,0xb,0xa
rssisav2g=0x3,0x3,0x3
rcal_flag=0x61
bxa2g=0
ccode=ALL
cctl=0x0
cckdigfilttype=0
ofdmdigfilttype=1
rxpo2g=0
boardnum=1
nocrc=1
otpimagesize=182
hwhdr=0x05ffff031030031003100000
RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
sd_gpout=0
sd_oobonly=1