Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 3.6.11 (xiangfu@macbook) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #30 Sun Jan 27 01:58:07 CST 2013
- [ 0.000000] MyLoader: sysp=3dd7cb87, boardp=f0717c55, parts=4852ecbe
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
- [ 0.000000] SoC: Atheros AR9330 rev 1
- [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
- [ 0.000000] On node 0 totalpages: 16384
- [ 0.000000] free_area_init_node: node 0, pgdat 802d1390, node_mem_map 81000000
- [ 0.000000] Normal zone: 128 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 61620k/65536k available (2106k kernel code, 3916k reserved, 395k data, 212k init, 0k highmem)
- [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:51
- [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
- [ 0.080000] pid_max: default: 32768 minimum: 301
- [ 0.080000] Mount-cache hash table entries: 512
- [ 0.090000] NET: Registered protocol family 16
- [ 0.090000] MIPS: machine is TP-LINK TL-WR703N v1
- [ 0.350000] bio: create slab <bio-0> at 0
- [ 0.350000] Switching to clocksource MIPS
- [ 0.360000] NET: Registered protocol family 2
- [ 0.360000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.370000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.380000] TCP: reno registered
- [ 0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.400000] NET: Registered protocol family 1
- [ 0.400000] PCI: CLS 0 bytes, default 32
- [ 0.420000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.430000] msgmni has been set to 120
- [ 0.440000] io scheduler noop registered
- [ 0.440000] io scheduler deadline registered (default)
- [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.450000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
- [ 0.460000] console [ttyATH0] enabled, bootconsole disabled
- [ 0.470000] ath79-spi ath79-spi: master is unqueued, this is deprecated
- [ 0.480000] m25p80 spi0.0: found en25q32b, expected m25p80
- [ 0.480000] m25p80 spi0.0: en25q32b (4096 Kbytes)
- [ 0.490000] 5 tp-link partitions found on MTD device spi0.0
- [ 0.490000] Creating 5 MTD partitions on "spi0.0":
- [ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
- [ 0.500000] 0x000000020000-0x0000000fbe08 : "kernel"
- [ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.520000] 0x0000000fbe08-0x0000003f0000 : "rootfs"
- [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.540000] mtd: partition "rootfs" set to be root filesystem
- [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000
- [ 0.550000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
- [ 0.560000] 0x0000003f0000-0x000000400000 : "art"
- [ 0.570000] 0x000000020000-0x0000003f0000 : "firmware"
- [ 0.590000] libphy: ag71xx_mdio: probed
- [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
- [ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
- [ 1.160000] TCP: cubic registered
- [ 1.160000] NET: Registered protocol family 17
- [ 1.170000] 8021q: 802.1Q VLAN Support v1.8
- [ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 1.180000] Freeing unused kernel memory: 212k freed
- [ 3.450000] Registered led device: tp-link:blue:system
- [ 6.150000] eth0: link up (100Mbps/Full duplex)
- [ 6.750000] jffs2: notice: (414) jffs2_build_xattr_subsystem: complete building xattr subsystem, 24 of xdatum (0 unchecked, 23 orphan) and 33 of xref (0 dead, 23 orphan) found.
- [ 6.860000] eth0: link down
- [ 9.180000] Compat-drivers backport release: compat-drivers-2013-01-08-3
- [ 9.190000] Backport based on wireless-testing.git master-2013-01-07
- [ 9.190000] compat.git: wireless-testing.git
- [ 9.220000] cfg80211: Calling CRDA to update world regulatory domain
- [ 9.230000] cfg80211: World regulatory domain updated:
- [ 9.230000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 9.240000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 9.250000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 9.260000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 9.260000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 9.270000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 9.540000] usbcore: registered new interface driver usbfs
- [ 9.540000] usbcore: registered new interface driver hub
- [ 9.550000] usbcore: registered new device driver usb
- [ 10.180000] ath: EEPROM regdomain: 0x0
- [ 10.180000] ath: EEPROM indicates default country code should be used
- [ 10.180000] ath: doing EEPROM country->regdmn map search
- [ 10.180000] ath: country maps to regdmn code: 0x3a
- [ 10.180000] ath: Country alpha2 being used: US
- [ 10.180000] ath: Regpair used: 0x3a
- [ 10.180000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 10.190000] Registered led device: ath9k-phy0
- [ 10.190000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
- [ 10.230000] PPP generic driver version 2.4.2
- [ 10.350000] cfg80211: Calling CRDA for country: US
- [ 10.360000] cfg80211: Regulatory domain changed to country: US
- [ 10.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 10.370000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 10.380000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 10.380000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.390000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.400000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.410000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 10.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 10.790000] NET: Registered protocol family 24
- [ 10.810000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 10.820000] ehci-platform ehci-platform: Generic Platform EHCI Controller
- [ 10.820000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
- [ 10.860000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- [ 10.880000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- [ 10.880000] hub 1-0:1.0: USB hub found
- [ 10.880000] hub 1-0:1.0: 1 port detected
- [ 10.910000] nf_conntrack version 0.5.0 (966 buckets, 3864 max)
- [ 11.360000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 11.370000] usbcore: registered new interface driver usbserial
- [ 11.370000] usbcore: registered new interface driver usbserial_generic
- [ 11.380000] USB Serial support registered for generic
- [ 11.390000] usbserial: USB Serial Driver core
- [ 11.510000] usbcore: registered new interface driver ftdi_sio
- [ 11.510000] USB Serial support registered for FTDI USB Serial Device
- [ 11.520000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
- [ 11.590000] hub 1-1:1.0: USB hub found
- [ 11.590000] hub 1-1:1.0: 4 ports detected
- [ 11.870000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
- [ 11.980000] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
- [ 11.990000] usb 1-1.1: Detected FT232RL
- [ 11.990000] usb 1-1.1: Number of endpoints 2
- [ 12.000000] usb 1-1.1: Endpoint 1 MaxPacketSize 16384
- [ 12.000000] usb 1-1.1: Endpoint 2 MaxPacketSize 16384
- [ 12.010000] usb 1-1.1: Setting MaxPacketSize 64
- [ 12.010000] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
- [ 16.880000] device eth0 entered promiscuous mode
- [ 17.500000] eth0: link up (100Mbps/Full duplex)
- [ 17.500000] br-lan: port 1(eth0) entered forwarding state
- [ 17.510000] br-lan: port 1(eth0) entered forwarding state
- [ 19.510000] br-lan: port 1(eth0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement