Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@overo:~$ dmesg
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 3.2.58-custom (vin@vin-virtual-linux) (gcc version 4.8.2 (GCC) ) #1 PREEMPT Sun Jun 1 03:52:59 BST 2014
- CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- Machine: Gumstix Overo
- Reserving 12582912 bytes SDRAM for VRAM
- Memory policy: ECC disabled, Data cache writeback
- On node 0 totalpages: 35584
- free_area_init_node: node 0, pgdat c06b99f0, node_mem_map c0751000
- Normal zone: 448 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 35136 pages, LIFO batch:7
- OMAP3430/3530 ES3.1.2 (l2cache iva sgx neon isp 720mhz )
- Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
- pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 35136
- Kernel command line: console=ttyO2,115200n8 mem=55M@0x80000000 mem=96M@0x88000000 i2c_bus=3,100 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
- PID hash table entries: 1024 (order: 0, 4096 bytes)
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- allocated 917504 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Memory: 55MB 84MB = 139MB total
- Memory: 132492k/132492k available, 22132k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xce800000 - 0xf8000000 ( 664 MB)
- lowmem : 0xc0000000 - 0xce000000 ( 224 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0633464 (6318 kB)
- .init : 0xc0634000 - 0xc0669000 ( 212 kB)
- .data : 0xc066a000 - 0xc06c3ab8 ( 359 kB)
- .bss : 0xc06c3adc - 0xc07507b0 ( 564 kB)
- NR_IRQS:410
- IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- Total of 96 interrupts on 1 active controller
- OMAP clockevent source: GPTIMER1 at 32768 Hz
- sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- Console: colour dummy device 80x30
- Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- Initializing cgroup subsys debug
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys perf_event
- CPU: Testing write buffer coherency: ok
- devtmpfs: initialized
- print_constraints: dummy:
- NET: Registered protocol family 16
- GPMC revision 5.0
- OMAP GPIO hardware version 2.5
- omap_mux_init: Add partition: #1: core, flags: 0
- Reprogramming SDRC clock to 332000000 Hz
- dpll3_m2_clk rate change failed: -22
- Found NAND on CS0
- Registering NAND on CS0
- platform iva.0: Enabled OPP corresponding to 720MHz
- hw-breakpoint: debug architecture 0x4 unsupported.
- omap-mcbsp.2: alias fck already exists
- omap-mcbsp.3: alias fck already exists
- Calibrating delay loop (skipped) already calibrated this CPU
- Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
- OMAP DMA hardware revision 4.0
- bio: create slab <bio-0> at 0
- machine_constraints_voltage: vads7846: override min_uV, 1 -> 3300000
- machine_constraints_voltage: vads7846: override max_uV, 2147483647 -> 3300000
- print_constraints: vads7846: 3300 mV
- reg-fixed-voltage reg-fixed-voltage.1: vads7846 supplying 3300000uV
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz
- twl4030: PIH (irq 7) chaining IRQs 368..375
- twl4030: power (irq 373) chaining IRQs 376..383
- twl4030: gpio (irq 368) chaining IRQs 384..401
- machine_constraints_voltage: VUSB1V5: override min_uV, 1 -> 1500000
- machine_constraints_voltage: VUSB1V5: override max_uV, 2147483647 -> 1500000
- print_constraints: VUSB1V5: 1500 mV normal standby
- machine_constraints_voltage: VUSB1V8: override min_uV, 1 -> 1800000
- machine_constraints_voltage: VUSB1V8: override max_uV, 2147483647 -> 1800000
- print_constraints: VUSB1V8: 1800 mV normal standby
- machine_constraints_voltage: VUSB3V1: override min_uV, 1 -> 3100000
- machine_constraints_voltage: VUSB3V1: override max_uV, 2147483647 -> 3100000
- print_constraints: VUSB3V1: 3100 mV normal standby
- twl4030_usb twl4030_usb: HW_CONDITIONS 0x10/16; link 0
- twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
- print_constraints: VDAC: 1800 mV normal standby
- print_constraints: VDVI: 1800 mV normal standby
- omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz
- omap-iommu omap-iommu.0: isp registered
- Advanced Linux Sound Architecture Driver Version 1.0.24.
- Switching to clocksource 32k_counter
- musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
- twl4030_usb twl4030_usb: twl4030_phy_resume
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 1.400
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- NET: Registered protocol family 2
- IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- platform iva.0: Enabled OPP corresponding to 720MHz
- audit: initializing netlink socket (disabled)
- type=2000 audit(0.148:1): initialized
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- Registering unionfs 2.5.10 (for 3.1.0-rc4)
- JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- fuse init (API version 7.17)
- msgmni has been set to 258
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered (default)
- OMAP DSS rev 2.0
- omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
- console [ttyO2] enabled
- brd: module loaded
- loop: module loaded
- twl4030_madc twl4030_madc: clk disabled, enabling
- omap2-nand driver initializing
- ONFI flash detected
- NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
- Creating 5 MTD partitions on "omap2-nand.0":
- 0x000000000000-0x000000080000 : "xloader"
- 0x000000080000-0x000000240000 : "uboot"
- 0x000000240000-0x000000280000 : "uboot environment"
- 0x000000280000-0x000000680000 : "linux"
- 0x000000680000-0x000020000000 : "rootfs"
- smsc911x: Driver version 2008-10-21
- smsc911x-mdio: probed
- smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
- smsc911x smsc911x.0: eth0: MAC Address: 00:af:c1:00:03:02
- smsc911x: Driver version 2008-10-21
- usbcore: registered new interface driver kaweth
- usbcore: registered new interface driver asix
- usbcore: registered new interface driver cdc_ether
- cdc_ncm: 04-Aug-2011
- usbcore: registered new interface driver cdc_ncm
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
- ehci-omap ehci-omap.0: failed to get ehci port1 regulator
- ehci-omap ehci-omap.0: phy reset operation timed out
- ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park
- ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- /home/vin/yocto/build/tmp/work/overo-poky-linux-gnueabi/linux-gumstix/3.2-r0/git/drivers/usb/core/inode.c: creating file 'devices'
- /home/vin/yocto/build/tmp/work/overo-poky-linux-gnueabi/linux-gumstix/3.2-r0/git/drivers/usb/core/inode.c: creating file '001'
- ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- ehci-omap ehci-omap.0: park 0
- ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
- ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- usb usb1: default language 0x0409
- usb usb1: udev 1, busnum 1, minor = 0
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: OMAP-EHCI Host Controller
- usb usb1: Manufacturer: Linux 3.2.58-custom ehci_hcd
- usb usb1: SerialNumber: ehci-omap.0
- usb usb1: usb_probe_device
- usb usb1: configuration #1 chosen from 1 choice
- usb usb1: adding 1-0:1.0 (config #1, interface 0)
- hub 1-0:1.0: usb_probe_interface
- hub 1-0:1.0: usb_probe_interface - got id
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 3 ports detected
- hub 1-0:1.0: standalone hub
- hub 1-0:1.0: individual port power switching
- hub 1-0:1.0: individual port over-current protection
- hub 1-0:1.0: power on to power good time: 20ms
- hub 1-0:1.0: local power source is good
- hub 1-0:1.0: enabling power on all ports
- /home/vin/yocto/build/tmp/work/overo-poky-linux-gnueabi/linux-gumstix/3.2-r0/git/drivers/usb/core/inode.c: creating file '001'
- ehci-omap ehci-omap.0: ...powerup ports...
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- mousedev: PS/2 mouse device common for all mice
- twl_rtc twl_rtc: Power up reset detected.
- twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- i2c /dev entries driver
- cpuidle: using governor ladder
- cpuidle: using governor menu
- hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- Registered led device: overo:red:gpio21
- Registered led device: overo:blue:gpio22
- Registered led device: overo:blue:COM
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- usbcore: registered new interface driver snd-usb-audio
- overo SoC init
- asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
- ALSA device list:
- #0: overo
- oprofile: hardware counters not available
- oprofile: using timer interrupt.
- TCP cubic registered
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- Registering the dns_resolver key type
- VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
- ThumbEE CPU extension supported.
- sr_init: No PMIC hook to init smartreflex
- smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- clock: disabling unused clocks to save power
- registered taskstats version 1
- fbcvt: 1024x768@60: CVT Name - .786M3-R
- Console: switching to colour frame buffer device 128x48
- regulator_init_complete: VDAC: incomplete constraints, leaving on
- regulator_init_complete: vads7846: incomplete constraints, leaving on
- twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:10 UTC (946684810)
- Waiting for root device /dev/mmcblk0p2...
- mmc0: host does not support reading read-only switch. assuming write-enable.
- mmc0: new high speed SDHC card at address 59b4
- mmcblk0: mmc0:59b4 00000 3.67 GiB
- mmcblk0: p1 p2
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (mmcblk0p2): using internal journal
- EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
- VFS: Mounted root (ext3 filesystem) on device 179:2.
- devtmpfs: mounted
- Freeing init memory: 212K
- systemd[1]: systemd 211 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
- systemd[1]: Detected architecture 'arm'.
- NET: Registered protocol family 10
- systemd[1]: Inserted module 'ipv6'
- systemd[1]: Set hostname to <overo>.
- systemd[1]: [/etc/systemd/system/network@.service:1] Assignment outside of section. Ignoring.
- systemd[1]: [/etc/systemd/system/network@.service:2] Assignment outside of section. Ignoring.
- systemd[1]: [/etc/systemd/system/network@.service:3] Assignment outside of section. Ignoring.
- systemd[1]: [/etc/systemd/system/network@.service:4] Assignment outside of section. Ignoring.
- systemd[1]: [/etc/systemd/system/network@.service:5] Assignment outside of section. Ignoring.
- systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- systemd[1]: Expecting device dev-ttyGS0.device...
- systemd[1]: Expecting device dev-ttyO2.device...
- systemd[1]: Starting Remote File Systems.
- systemd[1]: Reached target Remote File Systems.
- systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- systemd[1]: Starting Paths.
- systemd[1]: Reached target Paths.
- systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- systemd[1]: Starting Swap.
- systemd[1]: Reached target Swap.
- systemd[1]: Starting Root Slice.
- systemd[1]: Created slice Root Slice.
- systemd[1]: Starting Journal Socket.
- systemd[1]: Listening on Journal Socket.
- systemd[1]: Starting Delayed Shutdown Socket.
- systemd[1]: Listening on Delayed Shutdown Socket.
- systemd[1]: Starting udev Kernel Socket.
- systemd[1]: Listening on udev Kernel Socket.
- systemd[1]: Starting udev Control Socket.
- systemd[1]: Listening on udev Control Socket.
- systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- systemd[1]: Starting Syslog Socket.
- hub 1-0:1.0: hub_suspend
- usb usb1: bus auto-suspend, wakeup 1
- ehci-omap ehci-omap.0: suspend root hub
- systemd[1]: Listening on Syslog Socket.
- systemd[1]: Starting User and Session Slice.
- systemd[1]: Created slice User and Session Slice.
- systemd[1]: Starting System Slice.
- systemd[1]: Created slice System Slice.
- systemd[1]: Started Set Up Additional Binary Formats.
- systemd[1]: Mounting Debug File System...
- systemd[1]: Starting Journal Service...
- systemd[1]: Started Journal Service.
- systemd-udevd[87]: starting version 211
- systemd-journald[65]: Received request to flush runtime journal from PID 1
- ads7846 spi1.0: touchscreen, irq 274
- ads7846 spi1.0: no device detected, test read result was 0x00000000
- smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce816000, IRQ: 336
- eth0: IPv6 duplicate address fe80::2af:c1ff:fe00:302 detected!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement