Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <-start
- <-
- ->M105
- <-Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
- <-
- <-Free RAM:910
- <-
- <-Autoretract:0
- <-
- <-X:0.00 Y:0.00 Z:0.000 E:0.0000
- <-
- <-SpeedMultiply:100
- <-
- <-ok 0
- <-
- <-T:0.00 /0 B:0.00 /0 B@:0 @:0
- <-
- ->M115
- <-ok 0
- <-
- <-FIRMWARE_NAME:Repetier_0.92.2 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Delta EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
- <-
- <-Printed filament:323.76m Printing time:4 days 3 hours 42 min
- <-
- ->M105
- <-ok 0
- <-
- <-T:73.95 /0 B:41.22 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:73.55 /0 B:41.22 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:73.29 /0 B:41.22 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:72.99 /0 B:41.22 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:72.66 /0 B:41.16 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:72.37 /0 B:41.04 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:72.01 /0 B:41.04 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:71.71 /0 B:40.98 /0 B@:0 @:0
- <-
- ->M205
- <-ok 0
- <-
- <-EPR:2 75 250000 Baudrate
- <-
- <-EPR:3 129 323.758 Filament printed [m]
- <-
- <-EPR:2 125 358974 Printer active [s]
- <-
- <-EPR:2 79 1800000 Max. inactive time [ms,0=off]
- <-
- <-EPR:2 83 0 Stop stepper after inactivity [ms,0=off]
- <-
- <-EPR:3 11 80.0000 Steps per mm
- <-
- <-EPR:3 23 300.000 Max. feedrate [mm/s]
- <-
- <-EPR:3 35 120.000 Homing feedrate [mm/s]
- <-
- <-EPR:3 39 35.000 Max. jerk [mm/s]
- <-
- <-EPR:3 133 0.000 X home pos [mm]
- <-
- <-EPR:3 137 0.000 Y home pos [mm]
- <-
- <-EPR:3 141 0.000 Z home pos [mm]
- <-
- <-EPR:3 145 396.000 X max length [mm]
- <-
- <-EPR:3 149 396.000 Y max length [mm]
- <-
- <-EPR:3 153 396.000 Z max length [mm]
- <-
- <-EPR:3 59 1850.000 Acceleration [mm/s^2]
- <-
- <-EPR:3 71 3000.000 Travel acceleration [mm/s^2]
- <-
- <-EPR:3 881 268.500 Diagonal rod length [mm]
- <-
- <-EPR:3 885 129.725 Horizontal rod radius at 0,0 [mm]
- <-
- <-EPR:3 925 150.000 Max printable radius [mm]
- <-
- <-EPR:1 891 80 Segments/s for travel
- <-
- <-EPR:1 889 225 Segments/s for printing
- <-
- <-EPR:1 893 0 Tower X endstop offset [steps]
- <-
- <-EPR:1 895 0 Tower Y endstop offset [steps]
- <-
- <-EPR:1 897 0 Tower Z endstop offset [steps]
- <-
- <-EPR:3 901 210.000 Alpha A(210):
- <-
- <-EPR:3 905 330.000 Alpha B(330):
- <-
- <-EPR:3 909 90.000 Alpha C(90):
- <-
- <-EPR:3 913 0.000 Delta Radius A(0):
- <-
- <-EPR:3 917 0.000 Delta Radius B(0):
- <-
- <-EPR:3 921 0.000 Delta Radius C(0):
- <-
- <-EPR:3 933 0.000 Corr. diagonal A [mm]
- <-
- <-EPR:3 937 0.000 Corr. diagonal B [mm]
- <-
- <-EPR:3 941 0.000 Corr. diagonal C [mm]
- <-
- <-EPR:0 880 0 Autolevel active (1/0)
- <-
- <-EPR:0 106 1 Bed Heat Manager [0-3]
- <-
- <-EPR:0 107 255 Bed PID drive max
- <-
- <-EPR:0 124 80 Bed PID drive min
- <-
- <-EPR:3 108 30.790 Bed PID P-gain
- <-
- <-EPR:3 112 0.480 Bed PID I-gain
- <-
- <-EPR:3 116 486.800 Bed PID D-gain
- <-
- <-EPR:0 120 255 Bed PID max value [0-255]
- <-
- <-EPR:0 1018 0 Enable retraction conversion [0/1]
- <-
- <-EPR:3 992 3.000 Retraction length [mm]
- <-
- <-EPR:3 1000 40.000 Retraction speed [mm/s]
- <-
- <-EPR:3 1004 0.000 Retraction z-lift [mm]
- <-
- <-EPR:3 1008 0.000 Extra extrusion on undo retract [mm]
- <-
- <-EPR:3 1016 8.000 Retraction undo speed
- <-
- <-EPR:3 200 101.800 Extr.1 steps per mm
- <-
- <-EPR:3 204 100.000 Extr.1 max. feedrate [mm/s]
- <-
- <-EPR:3 208 45.000 Extr.1 start feedrate [mm/s]
- <-
- <-EPR:3 212 6500.000 Extr.1 acceleration [mm/s^2]
- <-
- <-EPR:0 216 3 Extr.1 heat manager [0-3]
- <-
- <-EPR:0 217 230 Extr.1 PID drive max
- <-
- <-EPR:0 245 40 Extr.1 PID drive min
- <-
- <-EPR:3 218 12.4400 Extr.1 PID P-gain/dead-time
- <-
- <-EPR:3 222 2.1800 Extr.1 PID I-gain
- <-
- <-EPR:3 226 112.9000 Extr.1 PID D-gain
- <-
- <-EPR:0 230 255 Extr.1 PID max value [0-255]
- <-
- <-EPR:2 231 0 Extr.1 X-offset [steps]
- <-
- <-EPR:2 235 0 Extr.1 Y-offset [steps]
- <-
- <-EPR:1 239 3 Extr.1 temp. stabilize time [s]
- <-
- <-EPR:1 250 150 Extr.1 temp. for retraction when heating [C]
- <-
- <-EPR:1 252 0 Extr.1 distance to retract when heating [mm]
- <-
- <-EPR:0 254 128 Extr.1 extruder cooler speed [0-255]
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:71.35 /0 B:40.98 /0 B@:0 @:0
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:71.09 /0 B:40.98 /0 B@:0 @:0
- <-
- <-wait
- <-
- ->M105
- <-wait
- <-
- <-ok 0
- <-
- <-T:70.79 /0 B:40.91 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:70.53 /0 B:40.79 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:70.26 /0 B:40.73 /0 B@:0 @:0
- <-
- <-wait
- <-
- ->M105
- <-wait
- <-
- <-ok 0
- <-
- <-T:69.96 /0 B:40.73 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:69.55 /0 B:40.73 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:69.25 /0 B:40.73 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:68.88 /0 B:40.73 /0 B@:0 @:0
- <-
- <-wait
- <-
- <-wait
- <-
- ->M105
- <-ok 0
- <-
- <-T:68.50 /0 B:40.67 /0 B@:0 @:0
- <-
- <-wait
- <-
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement