API tools faq
paste
Advertisement
Guest User

8.4 demsg.boot-v

a guest
Jun 22nd, 2014
118
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.02 KB | None | 0 0
raw download clone embed print report
  1. Copyright (c) 1992-2013 The FreeBSD Project.
  2. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  3. The Regents of the University of California. All rights reserved.
  4. FreeBSD is a registered trademark of The FreeBSD Foundation.
  5. FreeBSD 8.4-RELEASE-p8 #3 r264991: Sun Apr 27 12:58:29 CEST 2014
  6. [email protected]:/usr/obj/usr/src/sys/FALKO i386
  7. gcc version 4.2.1 20070831 patched [FreeBSD]
  8. Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc0b7d000.
  9. Timecounter "i8254" frequency 1193182 Hz quality 0
  10. Calibrating TSC clock ... TSC clock: 1002278356 Hz
  11. CPU: AMD Athlon(tm) processor (1002.28-MHz 686-class CPU)
  12. Origin = "AuthenticAMD" Id = 0x642 Family = 6 Model = 4 Stepping = 2
  13. Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  14. AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!>
  15. Data TLB: 24 entries, fully associative
  16. Instruction TLB: 16 entries, fully associative
  17. L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
  18. L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
  19. L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
  20. real memory = 805306368 (768 MB)
  21. Physical memory chunk(s):
  22. 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
  23. 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
  24. 0x0000000000c26000 - 0x000000002f227fff, 778051584 bytes (189954 pages)
  25. avail memory = 777551872 (741 MB)
  26. bios32: Found BIOS32 Service Directory header at 0xc00fb030
  27. bios32: Entry = 0xfb4a0 (c00fb4a0) Rev = 0 Len = 1
  28. pcibios: PCI BIOS entry at 0xf0000+0xb4d0
  29. pnpbios: Found PnP BIOS data at 0xc00fbfb0
  30. pnpbios: Entry = f0000:bfe0 Rev = 1.0
  31. Other BIOS signatures found:
  32. x86bios: IVT 0x000000-0x0004ff at 0xc0000000
  33. x86bios: SSEG 0x010000-0x01ffff at 0xc41f0000
  34. x86bios: ROM 0x0a0000-0x0effff at 0xc00a0000
  35. ULE: setup cpu 0
  36. snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
  37. feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
  38. nfslock: pseudo-device
  39. kbd: new array size 4
  40. kbd1 at kbdmux0
  41. mem: <memory>
  42. Pentium Pro MTRR support enabled
  43. null: <null device, zero device>
  44. VESA: information block
  45. 0000 56 45 53 41 00 02 00 01 00 9e 01 00 00 00 22 00
  46. 0010 00 9e 00 04 00 01 0e 01 00 9e 24 01 00 9e 29 01
  47. 0020 00 9e 6a 00 02 01 04 01 82 01 0d 01 0e 01 0f 01
  48. 0030 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01
  49. 0040 a4 01 a5 01 a6 01 b2 01 b3 01 b4 01 b5 01 b6 01
  50. 0050 c2 01 c3 01 c4 01 c5 01 c6 01 00 01 83 01 84 01
  51. 0060 85 01 86 01 01 01 10 01 11 01 12 01 21 01 03 01
  52. 0070 13 01 14 01 15 01 22 01 05 01 16 01 17 01 18 01
  53. 0080 23 01 07 01 19 01 1a 01 1b 01 24 01 09 01 0a 01
  54. 0090 30 01 ff ff 00 00 00 00 00 00 00 00 00 00 00 00
  55. 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  56. 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  57. 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  58. 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  59. 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  60. 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  61. 0100 41 54 49 20 52 41 44 45 4f 4e 20 56 45 00 41 54
  62. 0110 49 20 54 65 63 68 6e 6f 6c 6f 67 69 65 73 20 49
  63. 0120 6e 63 2e 00 52 31 30 30 00 30 31 2e 30 30 00 00
  64. 0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  65. 0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  66. 0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  67. 0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  68. 0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  69. 0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  70. 0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  71. 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  72. 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  73. 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  74. 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  75. 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  76. 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  77. VESA: 56 mode(s) found
  78. VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc421f022 (9e000022)
  79. VESA: ATI RADEON VE
  80. VESA: ATI Technologies Inc. R100 01.00
  81. io: <I/O>
  82. random: <entropy source, Software, Yarrow>
  83. ACPI: RSDP 0xf7a30 00014 (v00 VIA694)
  84. ACPI: RSDT 0x2fff3000 00028 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
  85. ACPI: FACP 0x2fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
  86. ACPI: DSDT 0x2fff30c0 02CE6 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C)
  87. ACPI: FACS 0x2fff0000 00040
  88. acpi0: <VIA694 AWRDACPI> on motherboard
  89. acpi0: [MPSAFE]
  90. acpi0: [ITHREAD]
  91. acpi0: Power Button (fixed)
  92. acpi0: wakeup code va 0xc41ef000 pa 0x1000
  93. pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
  94. pci_open(1a): mode1res=0x80000000 (0x80000000)
  95. pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
  96. pcibios: BIOS version 2.10
  97. acpi0: reservation of 0, a0000 (3) failed
  98. acpi0: reservation of 100000, 2fef0000 (3) failed
  99. ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
  100. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
  101. acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
  102. cpu0: <ACPI CPU> on acpi0
  103. cpu0: switching to generic Cx mode
  104. pci_link0: Index IRQ Rtd Ref IRQs
  105. Initial Probe 0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
  106. Validation 0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
  107. After Disable 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
  108. pci_link1: Index IRQ Rtd Ref IRQs
  109. Initial Probe 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
  110. Validation 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
  111. After Disable 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
  112. pci_link2: Index IRQ Rtd Ref IRQs
  113. Initial Probe 0 12 N 0 1 3 4 5 6 7 10 11 12 14 15
  114. Validation 0 12 N 0 1 3 4 5 6 7 10 11 12 14 15
  115. After Disable 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
  116. pci_link3: Index IRQ Rtd Ref IRQs
  117. Initial Probe 0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
  118. Validation 0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
  119. After Disable 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
  120. acpi_button0: <Power Button> on acpi0
  121. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0
  122. ACPI: Found matching pin for 0.11.INTA at func 0: 11
  123. ACPI: Found matching pin for 0.12.INTA at func 0: 12
  124. ACPI: Found matching pin for 0.12.INTB at func 1: 11
  125. ACPI: Found matching pin for 0.12.INTC at func 2: 10
  126. ACPI: Found matching pin for 0.12.INTA at func 0: 12
  127. ACPI: Found matching pin for 0.12.INTB at func 1: 11
  128. ACPI: Found matching pin for 0.12.INTC at func 2: 10
  129. ACPI: Found matching pin for 0.7.INTC at func 5: 12
  130. ACPI: Found matching pin for 0.7.INTD at func 2: 11
  131. pci0: <ACPI PCI bus> on pcib0
  132. pci0: domain=0, physical bus=0
  133. found-> vendor=0x1106, dev=0x0305, revid=0x03
  134. domain=0, bus=0, slot=0, func=0
  135. class=06-00-00, hdrtype=0x00, mfdev=0
  136. cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
  137. lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  138. powerspec 2 supports D0 D3 current D0
  139. map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, enabled
  140. found-> vendor=0x1106, dev=0x8305, revid=0x00
  141. domain=0, bus=0, slot=1, func=0
  142. class=06-04-00, hdrtype=0x01, mfdev=0
  143. cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
  144. lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
  145. powerspec 2 supports D0 D1 D3 current D0
  146. found-> vendor=0x1106, dev=0x0686, revid=0x40
  147. domain=0, bus=0, slot=7, func=0
  148. class=06-01-00, hdrtype=0x00, mfdev=1
  149. cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
  150. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  151. powerspec 2 supports D0 D3 current D0
  152. found-> vendor=0x1106, dev=0x0571, revid=0x06
  153. domain=0, bus=0, slot=7, func=1
  154. class=01-01-8a, hdrtype=0x00, mfdev=0
  155. cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
  156. lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  157. powerspec 2 supports D0 D3 current D0
  158. map[20]: type I/O Port, range 32, base 0xd000, size 4, enabled
  159. found-> vendor=0x1106, dev=0x3038, revid=0x16
  160. domain=0, bus=0, slot=7, func=2
  161. class=0c-03-00, hdrtype=0x00, mfdev=0
  162. cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
  163. lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  164. intpin=d, irq=11
  165. powerspec 2 supports D0 D3 current D0
  166. map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled
  167. pcib0: matched entry for 0.7.INTD (src \134_SB_.PCI0.LNKD:0)
  168. pcib0: slot 7 INTD routed to irq 11 via \134_SB_.PCI0.LNKD
  169. unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
  170. found-> vendor=0x1106, dev=0x3038, revid=0x16
  171. domain=0, bus=0, slot=7, func=3
  172. class=0c-03-00, hdrtype=0x00, mfdev=0
  173. cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
  174. lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  175. intpin=d, irq=11
  176. powerspec 2 supports D0 D3 current D0
  177. map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled
  178. pcib0: matched entry for 0.7.INTD (src \134_SB_.PCI0.LNKD:0)
  179. pcib0: slot 7 INTD routed to irq 11 via \134_SB_.PCI0.LNKD
  180. unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
  181. found-> vendor=0x1106, dev=0x3057, revid=0x40
  182. domain=0, bus=0, slot=7, func=4
  183. class=06-80-00, hdrtype=0x00, mfdev=0
  184. cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
  185. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  186. powerspec 2 supports D0 D3 current D0
  187. found-> vendor=0x1106, dev=0x3058, revid=0x50
  188. domain=0, bus=0, slot=7, func=5
  189. class=04-01-00, hdrtype=0x00, mfdev=0
  190. cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
  191. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  192. intpin=c, irq=12
  193. powerspec 2 supports D0 D3 current D0
  194. map[10]: type I/O Port, range 32, base 0xdc00, size 8, enabled
  195. map[14]: type I/O Port, range 32, base 0xe000, size 2, enabled
  196. map[18]: type I/O Port, range 32, base 0xe400, size 2, enabled
  197. pcib0: matched entry for 0.7.INTC (src \134_SB_.PCI0.LNKC:0)
  198. pcib0: slot 7 INTC routed to irq 12 via \134_SB_.PCI0.LNKC
  199. found-> vendor=0x10b7, dev=0x9200, revid=0x78
  200. domain=0, bus=0, slot=11, func=0
  201. class=02-00-00, hdrtype=0x00, mfdev=0
  202. cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
  203. lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
  204. intpin=a, irq=11
  205. powerspec 2 supports D0 D1 D2 D3 current D0
  206. map[10]: type I/O Port, range 32, base 0xe800, size 7, enabled
  207. map[14]: type Memory, range 32, base 0xe3000000, size 7, enabled
  208. pcib0: matched entry for 0.11.INTA (src \134_SB_.PCI0.LNKD:0)
  209. pcib0: slot 11 INTA routed to irq 11 via \134_SB_.PCI0.LNKD
  210. found-> vendor=0x1033, dev=0x0035, revid=0x43
  211. domain=0, bus=0, slot=12, func=0
  212. class=0c-03-10, hdrtype=0x00, mfdev=1
  213. cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
  214. lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
  215. intpin=a, irq=12
  216. powerspec 2 supports D0 D1 D2 D3 current D0
  217. map[10]: type Memory, range 32, base 0xe3001000, size 12, enabled
  218. pcib0: matched entry for 0.12.INTA (src \134_SB_.PCI0.LNKC:0)
  219. pcib0: slot 12 INTA routed to irq 12 via \134_SB_.PCI0.LNKC
  220. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe3001000
  221. found-> vendor=0x1033, dev=0x0035, revid=0x43
  222. domain=0, bus=0, slot=12, func=1
  223. class=0c-03-10, hdrtype=0x00, mfdev=0
  224. cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
  225. lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
  226. intpin=b, irq=11
  227. powerspec 2 supports D0 D1 D2 D3 current D0
  228. map[10]: type Memory, range 32, base 0xe3002000, size 12, enabled
  229. pcib0: matched entry for 0.12.INTB (src \134_SB_.PCI0.LNKD:0)
  230. pcib0: slot 12 INTB routed to irq 11 via \134_SB_.PCI0.LNKD
  231. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe3002000
  232. found-> vendor=0x1033, dev=0x00e0, revid=0x04
  233. domain=0, bus=0, slot=12, func=2
  234. class=0c-03-20, hdrtype=0x00, mfdev=0
  235. cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
  236. lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
  237. intpin=c, irq=10
  238. powerspec 2 supports D0 D1 D2 D3 current D0
  239. map[10]: type Memory, range 32, base 0xe3003000, size 8, enabled
  240. pcib0: matched entry for 0.12.INTC (src \134_SB_.PCI0.LNKA:0)
  241. pcib0: slot 12 INTC routed to irq 10 via \134_SB_.PCI0.LNKA
  242. unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe3003000
  243. agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> on hostb0
  244. hostb0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000
  245. agp0: allocating GATT for aperture of size 128M
  246. agp0: aperture size is 128M
  247. pcib1: <PCI-PCI bridge> at device 1.0 on pci0
  248. pcib1: domain 0
  249. pcib1: secondary bus 1
  250. pcib1: subordinate bus 1
  251. pcib1: I/O decode 0xc000-0xcfff
  252. pcib1: memory decode 0xe0000000-0xe1ffffff
  253. pcib1: prefetched decode 0xd8000000-0xdfffffff
  254. pci1: <PCI bus> on pcib1
  255. pci1: domain=0, physical bus=1
  256. found-> vendor=0x1002, dev=0x5159, revid=0x00
  257. domain=0, bus=1, slot=0, func=0
  258. class=03-00-00, hdrtype=0x00, mfdev=0
  259. cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
  260. lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
  261. intpin=a, irq=10
  262. powerspec 2 supports D0 D1 D2 D3 current D0
  263. map[10]: type Prefetchable Memory, range 32, base 0xd8000000, size 27, enabled
  264. pcib1: requested memory range 0xd8000000-0xdfffffff: good
  265. map[14]: type I/O Port, range 32, base 0xc000, size 8, enabled
  266. pcib1: requested I/O range 0xc000-0xc0ff: in range
  267. map[18]: type Memory, range 32, base 0xe1000000, size 16, enabled
  268. pcib1: requested memory range 0xe1000000-0xe100ffff: good
  269. pcib0: matched entry for 0.1.INTA (src \134_SB_.PCI0.LNKA:0)
  270. pcib0: slot 1 INTA routed to irq 10 via \134_SB_.PCI0.LNKA
  271. pcib1: slot 0 INTA is routed to irq 10
  272. vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd8000000-0xdfffffff,0xe1000000-0xe100ffff irq 10 at device 0.0 on pci1
  273. isab0: <PCI-ISA bridge> at device 7.0 on pci0
  274. isa0: <ISA bus> on isab0
  275. atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0
  276. atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000
  277. atapci0: Correcting VIA config for southbridge data corruption bug
  278. ata0: <ATA channel> at channel 0 on atapci0
  279. atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
  280. atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
  281. ata0: reset tp1 mask=03 ostat0=50 ostat1=00
  282. ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
  283. ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
  284. ata0: reset tp2 stat0=50 stat1=00 devices=0x1
  285. ata0: [MPSAFE]
  286. ata0: [ITHREAD]
  287. ata1: <ATA channel> at channel 1 on atapci0
  288. atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
  289. atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
  290. ata1: reset tp1 mask=01 ostat0=50 ostat1=ff
  291. ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
  292. ata1: reset tp2 stat0=00 stat1=00 devices=0x10000
  293. ata1: [MPSAFE]
  294. ata1: [ITHREAD]
  295. uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
  296. uhci0: [MPSAFE]
  297. uhci0: [ITHREAD]
  298. usbus0 on uhci0
  299. uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 7.3 on pci0
  300. uhci1: [MPSAFE]
  301. uhci1: [ITHREAD]
  302. usbus1 on uhci1
  303. viapropm0: SMBus I/O base at 0x5000
  304. viapropm0: SMBus I/O base at 0x5000
  305. viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at device 7.4 on pci0
  306. viapropm0: SMBus revision code 0x40
  307. smbus0: <System Management Bus> on viapropm0
  308. smb0: <SMBus generic I/O> on smbus0
  309. pcm0: <VIA VT82C686A> port 0xdc00-0xdcff,0xe000-0xe003,0xe400-0xe403 irq 12 at device 7.5 on pci0
  310. pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00
  311. pcm0: [MPSAFE]
  312. pcm0: [ITHREAD]
  313. pcm0: <ICEnsemble ICE1232 AC97 Codec (id = 0x49434511)>
  314. pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Reserved 27
  315. pcm0: Primary codec extended features variable rate PCM, AMAP
  316. pcm0: ac97 codec dac ready count: 0
  317. pcm0: Mixer "vol":
  318. pcm0: Mixer "pcm":
  319. pcm0: Mixer "speaker":
  320. pcm0: Mixer "line":
  321. pcm0: Mixer "mic":
  322. pcm0: Mixer "cd":
  323. pcm0: Mixer "rec":
  324. pcm0: Mixer "igain":
  325. pcm0: Mixer "ogain":
  326. pcm0: Mixer "line1":
  327. pcm0: Mixer "phin":
  328. pcm0: Mixer "phout":
  329. pcm0: Mixer "video":
  330. pcm0: clone manager: deadline=750ms flags=0x8000001e
  331. pcm0: sndbuf_setmap 159b000, 1000; 0xc459b000 -> 159b000
  332. pcm0: sndbuf_setmap 1663000, 1000; 0xc4663000 -> 1663000
  333. xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe800-0xe87f mem 0xe3000000-0xe300007f irq 11 at device 11.0 on pci0
  334. xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xe3000000
  335. xl0: using memory mapped I/O
  336. xl0: media options word: a
  337. xl0: found MII/AUTO
  338. miibus0: <MII bus> on xl0
  339. ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0
  340. ukphy0: OUI 0x00105a, model 0x0000, rev. 0
  341. ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
  342. xl0: bpf attached
  343. xl0: Ethernet address: 00:0a:5e:5f:01:6b
  344. xl0: [MPSAFE]
  345. xl0: [ITHREAD]
  346. ohci0: <NEC uPD 9210 USB controller> mem 0xe3001000-0xe3001fff irq 12 at device 12.0 on pci0
  347. ohci0: [MPSAFE]
  348. ohci0: [ITHREAD]
  349. usbus2 on ohci0
  350. ohci1: <NEC uPD 9210 USB controller> mem 0xe3002000-0xe3002fff irq 11 at device 12.1 on pci0
  351. ohci1: [MPSAFE]
  352. ohci1: [ITHREAD]
  353. usbus3 on ohci1
  354. ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xe3003000-0xe30030ff irq 10 at device 12.2 on pci0
  355. ehci0: [MPSAFE]
  356. ehci0: [ITHREAD]
  357. usbus4: EHCI version 1.0
  358. usbus4 on ehci0
  359. atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
  360. atrtc0: registered as a time-of-day clock (resolution 1000000us)
  361. fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
  362. fdc0: ic_type 90 part_id 80
  363. fdc0: [FILTER]
  364. fd0: <1440-KB 3.5" drive> on fdc0 drive 0
  365. fd1: <1200-KB 5.25" drive> on fdc0 drive 1
  366. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  367. uart0: [FILTER]
  368. uart0: fast interrupt
  369. uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
  370. uart1: [FILTER]
  371. uart1: fast interrupt
  372. ppc0: using extended I/O port range
  373. ppc0: SPP ECP ECP+EPP
  374. ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
  375. ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
  376. ppc0: FIFO with 16/16/8 bytes threshold
  377. ppc0: [MPSAFE]
  378. ppc0: [ITHREAD]
  379. ppbus0: <Parallel port bus> on ppc0
  380. plip0: <PLIP network interface> on ppbus0
  381. plip0: bpf attached
  382. plip0: [MPSAFE]
  383. plip0: [ITHREAD]
  384. lpt0: <Printer> on ppbus0
  385. lpt0: [MPSAFE]
  386. lpt0: [ITHREAD]
  387. lpt0: Interrupt-driven port
  388. ppi0: <Parallel I/O> on ppbus0
  389. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
  390. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  391. atkbd: the current kbd controller command byte 0067
  392. atkbd: keyboard ID 0x41ab (2)
  393. kbd0 at atkbd0
  394. kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
  395. atkbd0: [GIANT-LOCKED]
  396. atkbd0: [ITHREAD]
  397. psm0: unable to allocate IRQ
  398. pnp_identify: Trying Read_Port at 203
  399. pnp_identify: Trying Read_Port at 243
  400. pnp_identify: Trying Read_Port at 283
  401. pnp_identify: Trying Read_Port at 2c3
  402. pnp_identify: Trying Read_Port at 303
  403. pnp_identify: Trying Read_Port at 343
  404. pnp_identify: Trying Read_Port at 383
  405. pnp_identify: Trying Read_Port at 3c3
  406. PNP Identify complete
  407. isa_probe_children: disabling PnP devices
  408. pmtimer0 on isa0
  409. ata: ata0 already exists; skipping it
  410. ata: ata1 already exists; skipping it
  411. atkbdc: atkbdc0 already exists; skipping it
  412. atrtc: atrtc0 already exists; skipping it
  413. attimer: attimer0 already exists; skipping it
  414. fdc: fdc0 already exists; skipping it
  415. ppc: ppc0 already exists; skipping it
  416. sc: sc0 already exists; skipping it
  417. uart: uart0 already exists; skipping it
  418. uart: uart1 already exists; skipping it
  419. isa_probe_children: probing non-PnP devices
  420. orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcc7ff pnpid ORM0000 on isa0
  421. sc0: <System console> at flags 0x100 on isa0
  422. sc0: VGA <16 virtual consoles, flags=0x300>
  423. sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
  424. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
  425. wbwd0 failed to probe on isa0
  426. isa_probe_children: probing PnP devices
  427. acpi_throttle0: <ACPI CPU Throttling> on cpu0
  428. acpi_throttle0: P_CNT from P_BLK 0x4010
  429. Device configuration finished.
  430. procfs registered
  431. Timecounter "TSC" frequency 1002278356 Hz quality 800
  432. Timecounters tick every 1.000 msec
  433. vlan: initialized, using hash tables with chaining
  434. lo0: bpf attached
  435. ata0: Identifying devices: 00000001
  436. ata0: New devices: 00000001
  437. usbus0: 12Mbps Full Speed USB v1.0
  438. usbus1: 12Mbps Full Speed USB v1.0
  439. usbus2: 12Mbps Full Speed USB v1.0
  440. usbus3: 12Mbps Full Speed USB v1.0
  441. usbus4: 480Mbps High Speed USB v2.0
  442. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
  443. ad0: setting UDMA100
  444. ad0: 57241MB <Seagate ST360021A 3.19> at ata0-master UDMA100
  445. ad0: 117231408 sectors [28733C/16H/255S] 16 sectors/interrupt 1 depth queue
  446. ugen0.1: <VIA> at usbus0
  447. uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  448. ugen1.1: <VIA> at usbus1
  449. uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  450. ugen2.1: <NEC> at usbus2
  451. uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
  452. ugen3.1: <NEC> at usbus3
  453. uhub3: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
  454. ugen4.1: <NEC> at usbus4
  455. uhub4: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
  456. ad0: VIA check1 failed
  457. ad0: Adaptec check1 failed
  458. ad0: LSI (v3) check1 failed
  459. ad0: LSI (v2) check1 failed
  460. ad0: FreeBSD check1 failed
  461. ata1: Identifying devices: 00010000
  462. ata1: New devices: 00010000
  463. ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
  464. acd0: setting UDMA33
  465. acd0: <AOPEN DVD1648/AAP PRO/1.02> DVDROM drive at ata1 as master
  466. acd0: 512KB buffer, UDMA33
  467. acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
  468. acd0: Writes:
  469. acd0: Audio: play, 16 volume levels
  470. acd0: Mechanism: ejectable tray, unlocked
  471. acd0: Medium: no/blank disc
  472. ATA PseudoRAID loaded
  473. uhub3: 2 ports with 2 removable, self powered
  474. uhub2: 3 ports with 3 removable, self powered
  475. uhub0: 2 ports with 2 removable, self powered
  476. uhub1: 2 ports with 2 removable, self powered
  477. GEOM: new disk ad0
  478. GEOM: ad0s1: geometry does not match label (16h,63s != 16h,255s).
  479. Root mount waiting for: usbus4
  480. uhub4: 5 ports with 5 removable, self powered
  481. Trying to mount root from ufs:/dev/ad0s1a
  482. start_init: trying /sbin/init
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!