Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2014) (preloaded format=pdflatex 2014.7.16) 22 SEP 2014 13:32
- entering extended mode
- restricted \write18 enabled.
- %&-line parsing enabled.
- **figure.tex -recorder
- (./figure.tex
- LaTeX2e <2014/05/01>
- Babel <3.9k> and hyphenation patterns for 79 languages loaded.
- (/usr/local/texlive/2014/texmf-dist/tex/latex/base/article.cls
- Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
- (/usr/local/texlive/2014/texmf-dist/tex/latex/base/size10.clo
- File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
- )
- \c@part=\count79
- \c@section=\count80
- \c@subsection=\count81
- \c@subsubsection=\count82
- \c@paragraph=\count83
- \c@subparagraph=\count84
- \c@figure=\count85
- \c@table=\count86
- \abovecaptionskip=\skip41
- \belowcaptionskip=\skip42
- \bibindent=\dimen102
- )
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/frontendlayer/tikz.sty
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/basiclayer/pgf.sty
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/utilities/pgfrcs.sty
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/utilities/pgfutil-common.te
- x
- \pgfutil@everybye=\toks14
- \pgfutil@tempdima=\dimen103
- \pgfutil@tempdimb=\dimen104
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/utilities/pgfutil-common-li
- sts.tex))
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/utilities/pgfutil-latex.def
- \pgfutil@abb=\box26
- (/usr/local/texlive/2014/texmf-dist/tex/latex/ms/everyshi.sty
- Package: everyshi 2001/05/15 v3.00 EveryShipout Package (MS)
- ))
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/utilities/pgfrcs.code.tex
- Package: pgfrcs 2013/12/20 v3.0.0 (rcs-revision 1.28)
- ))
- Package: pgf 2013/12/18 v3.0.0 (rcs-revision 1.14)
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/basiclayer/pgfcore.sty
- (/usr/local/texlive/2014/texmf-dist/tex/latex/graphics/graphicx.sty
- Package: graphicx 2014/04/25 v1.0g Enhanced LaTeX Graphics (DPC,SPQR)
- (/usr/local/texlive/2014/texmf-dist/tex/latex/graphics/keyval.sty
- Package: keyval 2014/05/08 v1.15 key=value parser (DPC)
- \KV@toks@=\toks15
- )
- (/usr/local/texlive/2014/texmf-dist/tex/latex/graphics/graphics.sty
- Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR)
- (/usr/local/texlive/2014/texmf-dist/tex/latex/graphics/trig.sty
- Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
- )
- (/usr/local/texlive/2014/texmf-dist/tex/latex/latexconfig/graphics.cfg
- File: graphics.cfg 2010/04/23 v1.9 graphics configuration of TeX Live
- )
- Package graphics Info: Driver file: pdftex.def on input line 91.
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pdftex-def/pdftex.def
- File: pdftex.def 2011/05/27 v0.06d Graphics/color for pdfTeX
- (/usr/local/texlive/2014/texmf-dist/tex/generic/oberdiek/infwarerr.sty
- Package: infwarerr 2010/04/08 v1.3 Providing info/warning/error messages (HO)
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/oberdiek/ltxcmds.sty
- Package: ltxcmds 2011/11/09 v1.22 LaTeX kernel commands for general use (HO)
- )
- \Gread@gobject=\count87
- ))
- \Gin@req@height=\dimen105
- \Gin@req@width=\dimen106
- )
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/systemlayer/pgfsys.sty
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/systemlayer/pgfsys.code.tex
- Package: pgfsys 2013/11/30 v3.0.0 (rcs-revision 1.47)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/utilities/pgfkeys.code.tex
- \pgfkeys@pathtoks=\toks16
- \pgfkeys@temptoks=\toks17
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/utilities/pgfkeysfiltered.c
- ode.tex
- \pgfkeys@tmptoks=\toks18
- ))
- \pgf@x=\dimen107
- \pgf@y=\dimen108
- \pgf@xa=\dimen109
- \pgf@ya=\dimen110
- \pgf@xb=\dimen111
- \pgf@yb=\dimen112
- \pgf@xc=\dimen113
- \pgf@yc=\dimen114
- \w@pgf@writea=\write3
- \r@pgf@reada=\read1
- \c@pgf@counta=\count88
- \c@pgf@countb=\count89
- \c@pgf@countc=\count90
- \c@pgf@countd=\count91
- \t@pgf@toka=\toks19
- \t@pgf@tokb=\toks20
- \t@pgf@tokc=\toks21
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/systemlayer/pgf.cfg
- File: pgf.cfg 2008/05/14 (rcs-revision 1.7)
- )
- Driver file for pgf: pgfsys-pdftex.def
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/systemlayer/pgfsys-pdftex.d
- ef
- File: pgfsys-pdftex.def 2013/07/18 (rcs-revision 1.33)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/systemlayer/pgfsys-common-p
- df.def
- File: pgfsys-common-pdf.def 2013/10/10 (rcs-revision 1.13)
- )))
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/systemlayer/pgfsyssoftpath.
- code.tex
- File: pgfsyssoftpath.code.tex 2013/09/09 (rcs-revision 1.9)
- \pgfsyssoftpath@smallbuffer@items=\count92
- \pgfsyssoftpath@bigbuffer@items=\count93
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/systemlayer/pgfsysprotocol.
- code.tex
- File: pgfsysprotocol.code.tex 2006/10/16 (rcs-revision 1.4)
- )) (/usr/local/texlive/2014/texmf-dist/tex/latex/xcolor/xcolor.sty
- Package: xcolor 2007/01/21 v2.11 LaTeX color extensions (UK)
- (/usr/local/texlive/2014/texmf-dist/tex/latex/latexconfig/color.cfg
- File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive
- )
- Package xcolor Info: Driver file: pdftex.def on input line 225.
- Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1337.
- Package xcolor Info: Model `hsb' substituted by `rgb' on input line 1341.
- Package xcolor Info: Model `RGB' extended on input line 1353.
- Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1355.
- Package xcolor Info: Model `Hsb' substituted by `hsb' on input line 1356.
- Package xcolor Info: Model `tHsb' substituted by `hsb' on input line 1357.
- Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1358.
- Package xcolor Info: Model `Gray' substituted by `gray' on input line 1359.
- Package xcolor Info: Model `wave' substituted by `hsb' on input line 1360.
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcore.code.tex
- Package: pgfcore 2010/04/11 v3.0.0 (rcs-revision 1.7)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmath.code.tex
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathcalc.code.tex
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathutil.code.tex)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathparser.code.tex
- \pgfmath@dimen=\dimen115
- \pgfmath@count=\count94
- \pgfmath@box=\box27
- \pgfmath@toks=\toks22
- \pgfmath@stack@operand=\toks23
- \pgfmath@stack@operation=\toks24
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.code.
- tex
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.basic
- .code.tex)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.trigo
- nometric.code.tex)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.rando
- m.code.tex)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.compa
- rison.code.tex)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.base.
- code.tex)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.round
- .code.tex)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.misc.
- code.tex)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.integ
- erarithmetics.code.tex)))
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmathfloat.code.tex
- \c@pgfmathroundto@lastzeros=\count95
- ))
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcorepoints.co
- de.tex
- File: pgfcorepoints.code.tex 2013/10/07 (rcs-revision 1.27)
- \pgf@picminx=\dimen116
- \pgf@picmaxx=\dimen117
- \pgf@picminy=\dimen118
- \pgf@picmaxy=\dimen119
- \pgf@pathminx=\dimen120
- \pgf@pathmaxx=\dimen121
- \pgf@pathminy=\dimen122
- \pgf@pathmaxy=\dimen123
- \pgf@xx=\dimen124
- \pgf@xy=\dimen125
- \pgf@yx=\dimen126
- \pgf@yy=\dimen127
- \pgf@zx=\dimen128
- \pgf@zy=\dimen129
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcorepathconst
- ruct.code.tex
- File: pgfcorepathconstruct.code.tex 2013/10/07 (rcs-revision 1.29)
- \pgf@path@lastx=\dimen130
- \pgf@path@lasty=\dimen131
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcorepathusage
- .code.tex
- File: pgfcorepathusage.code.tex 2013/12/13 (rcs-revision 1.23)
- \pgf@shorten@end@additional=\dimen132
- \pgf@shorten@start@additional=\dimen133
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcorescopes.co
- de.tex
- File: pgfcorescopes.code.tex 2013/10/09 (rcs-revision 1.44)
- \pgfpic=\box28
- \pgf@hbox=\box29
- \pgf@layerbox@main=\box30
- \pgf@picture@serial@count=\count96
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcoregraphicst
- ate.code.tex
- File: pgfcoregraphicstate.code.tex 2013/09/19 (rcs-revision 1.11)
- \pgflinewidth=\dimen134
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcoretransform
- ations.code.tex
- File: pgfcoretransformations.code.tex 2013/10/10 (rcs-revision 1.17)
- \pgf@pt@x=\dimen135
- \pgf@pt@y=\dimen136
- \pgf@pt@temp=\dimen137
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcorequick.cod
- e.tex
- File: pgfcorequick.code.tex 2008/10/09 (rcs-revision 1.3)
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcoreobjects.c
- ode.tex
- File: pgfcoreobjects.code.tex 2006/10/11 (rcs-revision 1.2)
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcorepathproce
- ssing.code.tex
- File: pgfcorepathprocessing.code.tex 2013/09/09 (rcs-revision 1.9)
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcorearrows.co
- de.tex
- File: pgfcorearrows.code.tex 2013/11/07 (rcs-revision 1.40)
- \pgfarrowsep=\dimen138
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcoreshade.cod
- e.tex
- File: pgfcoreshade.code.tex 2013/07/15 (rcs-revision 1.15)
- \pgf@max=\dimen139
- \pgf@sys@shading@range@num=\count97
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcoreimage.cod
- e.tex
- File: pgfcoreimage.code.tex 2013/07/15 (rcs-revision 1.18)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcoreexternal.
- code.tex
- File: pgfcoreexternal.code.tex 2013/07/15 (rcs-revision 1.20)
- \pgfexternal@startupbox=\box31
- ))
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcorelayers.co
- de.tex
- File: pgfcorelayers.code.tex 2013/07/18 (rcs-revision 1.7)
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcoretranspare
- ncy.code.tex
- File: pgfcoretransparency.code.tex 2013/09/30 (rcs-revision 1.5)
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/basiclayer/pgfcorepatterns.
- code.tex
- File: pgfcorepatterns.code.tex 2013/11/07 (rcs-revision 1.5)
- )))
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/modules/pgfmoduleshapes.cod
- e.tex
- File: pgfmoduleshapes.code.tex 2013/10/31 (rcs-revision 1.34)
- \pgfnodeparttextbox=\box32
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/modules/pgfmoduleplot.code.
- tex
- File: pgfmoduleplot.code.tex 2013/07/31 (rcs-revision 1.12)
- )
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/compatibility/pgfcomp-version
- -0-65.sty
- Package: pgfcomp-version-0-65 2007/07/03 v3.0.0 (rcs-revision 1.7)
- \pgf@nodesepstart=\dimen140
- \pgf@nodesepend=\dimen141
- )
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/compatibility/pgfcomp-version
- -1-18.sty
- Package: pgfcomp-version-1-18 2007/07/23 v3.0.0 (rcs-revision 1.1)
- ))
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/utilities/pgffor.sty
- (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/utilities/pgfkeys.sty
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/utilities/pgfkeys.code.tex)
- ) (/usr/local/texlive/2014/texmf-dist/tex/latex/pgf/math/pgfmath.sty
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmath.code.tex))
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/utilities/pgffor.code.tex
- Package: pgffor 2013/12/13 v3.0.0 (rcs-revision 1.25)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/math/pgfmath.code.tex)
- \pgffor@iter=\dimen142
- \pgffor@skip=\dimen143
- \pgffor@stack=\toks25
- \pgffor@toks=\toks26
- ))
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/frontendlayer/tikz/tikz.cod
- e.tex
- Package: tikz 2013/12/13 v3.0.0 (rcs-revision 1.142)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/libraries/pgflibraryplothan
- dlers.code.tex
- File: pgflibraryplothandlers.code.tex 2013/08/31 v3.0.0 (rcs-revision 1.20)
- \pgf@plot@mark@count=\count98
- \pgfplotmarksize=\dimen144
- )
- \tikz@lastx=\dimen145
- \tikz@lasty=\dimen146
- \tikz@lastxsaved=\dimen147
- \tikz@lastysaved=\dimen148
- \tikzleveldistance=\dimen149
- \tikzsiblingdistance=\dimen150
- \tikz@figbox=\box33
- \tikz@figbox@bg=\box34
- \tikz@tempbox=\box35
- \tikz@tempbox@bg=\box36
- \tikztreelevel=\count99
- \tikznumberofchildren=\count100
- \tikznumberofcurrentchild=\count101
- \tikz@fig@count=\count102
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/modules/pgfmodulematrix.cod
- e.tex
- File: pgfmodulematrix.code.tex 2013/09/17 (rcs-revision 1.8)
- \pgfmatrixcurrentrow=\count103
- \pgfmatrixcurrentcolumn=\count104
- \pgf@matrix@numberofcolumns=\count105
- )
- \tikz@expandcount=\count106
- (/usr/local/texlive/2014/texmf-dist/tex/generic/pgf/frontendlayer/tikz/librarie
- s/tikzlibrarytopaths.code.tex
- File: tikzlibrarytopaths.code.tex 2008/06/17 v3.0.0 (rcs-revision 1.2)
- )))
- (/usr/local/texlive/2014/texmf-dist/tex/latex/preview/preview.sty
- Package: preview 2010/02/14 11.86 (AUCTeX/preview-latex)
- )
- (./figure.aux)
- \openout1 = `figure.aux'.
- LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 8.
- LaTeX Font Info: ... okay on input line 8.
- LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 8.
- LaTeX Font Info: ... okay on input line 8.
- LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 8.
- LaTeX Font Info: ... okay on input line 8.
- LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 8.
- LaTeX Font Info: ... okay on input line 8.
- LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 8.
- LaTeX Font Info: ... okay on input line 8.
- LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 8.
- LaTeX Font Info: ... okay on input line 8.
- ABD: EveryShipout initializing macros
- (/usr/local/texlive/2014/texmf-dist/tex/context/base/supp-pdf.mkii
- [Loading MPS to PDF converter (version 2006.09.02).]
- \scratchcounter=\count107
- \scratchdimen=\dimen151
- \scratchbox=\box37
- \nofMPsegments=\count108
- \nofMParguments=\count109
- \everyMPshowfont=\toks27
- \MPscratchCnt=\count110
- \MPscratchDim=\dimen152
- \MPnumerator=\count111
- \makeMPintoPDFobject=\count112
- \everyMPtoPDFconversion=\toks28
- ) (/usr/local/texlive/2014/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty
- Package: pdftexcmds 2011/11/29 v0.20 Utility functions of pdfTeX for LuaTeX (HO
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/oberdiek/ifluatex.sty
- Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
- Package ifluatex Info: LuaTeX not detected.
- )
- (/usr/local/texlive/2014/texmf-dist/tex/generic/oberdiek/ifpdf.sty
- Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO)
- Package ifpdf Info: pdfTeX in PDF mode is detected.
- )
- Package pdftexcmds Info: LuaTeX not detected.
- Package pdftexcmds Info: \pdf@primitive is available.
- Package pdftexcmds Info: \pdf@ifprimitive is available.
- Package pdftexcmds Info: \pdfdraftmode found.
- )
- (/usr/local/texlive/2014/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty
- Package: epstopdf-base 2010/02/09 v2.5 Base part for package epstopdf
- (/usr/local/texlive/2014/texmf-dist/tex/latex/oberdiek/grfext.sty
- Package: grfext 2010/08/19 v1.1 Manage graphics extensions (HO)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/oberdiek/kvdefinekeys.sty
- Package: kvdefinekeys 2011/04/07 v1.3 Define keys (HO)
- ))
- (/usr/local/texlive/2014/texmf-dist/tex/latex/oberdiek/kvoptions.sty
- Package: kvoptions 2011/06/30 v3.11 Key value format for package options (HO)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty
- Package: kvsetkeys 2012/04/25 v1.16 Key value parser (HO)
- (/usr/local/texlive/2014/texmf-dist/tex/generic/oberdiek/etexcmds.sty
- Package: etexcmds 2011/02/16 v1.5 Avoid name clashes with e-TeX commands (HO)
- Package etexcmds Info: Could not find \expanded.
- (etexcmds) That can mean that you are not using pdfTeX 1.50 or
- (etexcmds) that some package has redefined \expanded.
- (etexcmds) In the latter case, load this package earlier.
- )))
- Package grfext Info: Graphics extension search list:
- (grfext) [.png,.pdf,.jpg,.mps,.jpeg,.jbig2,.jb2,.PNG,.PDF,.JPG,.JPE
- G,.JBIG2,.JB2,.eps]
- (grfext) \AppendGraphicsExtensions on input line 452.
- (/usr/local/texlive/2014/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
- File: epstopdf-sys.cfg 2010/07/13 v1.3 Configuration of (r)epstopdf for TeX Liv
- e
- ))
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- Overfull \vbox (83.0pt too high) has occurred while \output is active []
- ! Undefined control sequence.
- \@EveryShipout@Output ...EveryShipout@Org@Shipout
- \box \@cclv
- l.12 \end{document}
- The control sequence at the end of the top line
- of your error message was never \def'ed. If you have
- misspelled it (e.g., `\hobx'), type `I' and the correct
- spelling (e.g., `I\hbox'). Otherwise just continue,
- and I'll forget about whatever was undefined.
- ! Output loop---100 consecutive dead cycles.
- \clearpage ...\fi \newpage \write \m@ne {}\vbox {}
- \penalty -\@Mi
- l.12 \end{document}
- (That makes 100 errors; please try again.)
- Here is how much of TeX's memory you used:
- 11285 strings out of 493108
- 230659 string characters out of 6134847
- 276558 words of memory out of 5000000
- 14561 multiletter control sequences out of 15000+600000
- 3640 words of font info for 14 fonts, out of 8000000 for 9000
- 1141 hyphenation exceptions out of 8191
- 55i,5n,54p,417b,116s stack positions out of 5000i,500n,10000p,200000b,80000s
- ! ==> Fatal error occurred, no output PDF file produced!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement