API tools faq
paste
Advertisement
Guest User

Buffalo boot log

a guest
Feb 22nd, 2016
254
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.12 KB | None | 0 0
raw download clone embed print report
  1. CFE> flash -noheader -size=23490560 192.168.11.2:wzr1750dhpd-v24sp2-23709c.bin nflash1.trx
  2. Reading 192.168.11.2:wzr1750dhpd-v24sp2-23709c.bin: Done. 23490560 bytes read
  3. Programming...done. 23490560 bytes written
  4. *** command status = 0
  5. CFE> reboot
  6.  
  7.  
  8. BUFFALO CFE Version 1.00 [DDRCLK:400]
  9. Memory Test start(0x07E00000) end(0x08000000) size(2097152)
  10. Data line test start:0x07e00000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  11. Address line test start:0x07e00000 len:0x200000 pattern 0xAAAAAAAA 0x55555555
  12. Fill test patnum:2
  13. fill Pattern 5555AAAA Writing... Reading...
  14. fill Pattern AAAA5555 Writing... Reading...
  15. decompressing
  16. Decompressing...done
  17. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  18. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  19.  
  20. DDR clock change and Calibrate... [400->533]
  21.  
  22.  
  23. BUFFALO CFE Version 1.00 [DDRCLK:533]
  24. Memory Test start(0x07E00000) end(0x08000000) size(2097152)
  25. Data line test start:0x07e00000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  26. Address line test start:0x07e00000 len:0x200000 pattern 0xAAAAAAAA 0x55555555
  27. Fill test patnum:2
  28. fill Pattern 5555AAAA Writing... Reading...
  29. fill Pattern AAAA5555 Writing... Reading...
  30. decompressing
  31. Decompressing...done
  32. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  33.  
  34.  
  35. CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
  36. Build Date: Fri Jan 18 16:22:36 JST 2013 (root@fc17.localdomain)
  37. Copyright (C) 2000-2008 Broadcom Corporation.
  38.  
  39. Memory Test start(0x00000000) end(0x07E00000) size(132120576)
  40. Data line test start:0x00000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  41. Address line test start:0x00000000 len:0x7e00000 pattern 0xAAAAAAAA 0x55555555
  42. Fill test patnum:2
  43. fill Pattern 5555AAAA Writing... Reading...
  44. fill Pattern AAAA5555 Writing... Reading...
  45. Memory Test start(0x88000000) end(0xA0000000) size(402653184)
  46. Data line test start:0x88000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  47. Address line test start:0x88000000 len:0x18000000 pattern 0xAAAAAAAA 0x55555555
  48. Fill test patnum:2
  49. fill Pattern 5555AAAA Writing... Reading...
  50. fill Pattern AAAA5555 Writing... Reading...
  51. Init Arena
  52. Init Devs.
  53. Boot partition size = 262144(0x40000)
  54. Found a Esmt NAND flash:
  55. Total size: 128MB
  56. Block size: 128KB
  57. Page Size: 2048B
  58. OOB Size: 64B
  59. Sector size: 512B
  60. Spare size: 16B
  61. ECC level: 8-bit
  62. Device ID: 0x92 0xf1 0x80 0x95 0x40
  63. DDR Clock: 533 MHz
  64. Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
  65. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  66. CPU type 0x0: 800MHz
  67. Tot mem: 524288 KBytes
  68.  
  69. CFE mem: 0x07E00000 - 0x07F9A984 (1681796)
  70. Data: 0x07E53480 - 0x07E53948 (1224)
  71. BSS: 0x07E53958 - 0x07E98984 (282668)
  72. Heap: 0x07E98984 - 0x07F98984 (1048576)
  73. Stack: 0x07F98984 - 0x07F9A984 (8192)
  74. Text: 0x07E00000 - 0x07E488F0 (297200)
  75. Boot: 0x07F9B000 - 0x07FDB000
  76. Reloc: I:00000000 - D:00000000
  77.  
  78. Device eth0: hwaddr B2-C7-45-7C-D0-9A, ipaddr 192.168.11.1, mask 255.255.255.0
  79. gateway not set, nameserver not set
  80. check_trx: start nflash1.trx
  81. check_trx: exit nflash1.trx
  82. Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
  83. Loading: .. 1348552 bytes read
  84. Entry at 0x00008000
  85. Closing network.
  86. Starting program at 0x00008000
  87. Uncompressing Linux... done, booting the kernel.
  88. Booting Linux on physical CPU 0x0
  89. Linux version 3.10.35-rc1 (root@dd-wrt.buildserver) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r39555) ) #2279 SMP Thu Jun 12 06:50:44 CEST 2014
  90. CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
  91. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  92. Machine: Northstar Prototype
  93. Ignoring unrecognised tag 0x00000000
  94. Memory policy: ECC disabled, Data cache writealloc
  95. map io
  96. MPCORE found at 19020000 (VIRT d9020000) 18000000 d8000000
  97. PERCPU: Embedded 7 pages/cpu @c1838000 s7040 r8192 d13440 u32768
  98. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130816
  99. Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3 earlyprintk=1 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
  100. PID hash table entries: 512 (order: -1, 2048 bytes)
  101. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  102. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  103. Memory: 128MB 384MB = 512MB total
  104. Memory: 515700k/515700k available, 8588k reserved, 393216K highmem
  105. Virtual kernel memory layout:
  106. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  107. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  108. vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
  109. lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  110. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  111. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  112. .text : 0xc0008000 - 0xc034fda4 (3360 kB)
  113. .init : 0xc0350000 - 0xc038ab80 ( 235 kB)
  114. .data : 0xc038c000 - 0xc03c8b48 ( 243 kB)
  115. .bss : 0xc03c8b48 - 0xc0428e64 ( 385 kB)
  116. Hierarchical RCU implementation.
  117. CONFIG_RCU_FANOUT set to non-default value of 2
  118. NR_IRQS:256
  119. MPCORE GIC init
  120. External imprecise Data abort at addr=0x0, fsr=0x1c06 ignored.
  121. MPCORE Global Timer Clock 400000000Hz on IRQ 27
  122. sched_clock: 32 bits at 400MHz, resolution 2ns, wraps every 10737ms
  123. register local timer
  124. smp_twd: clock not found -2
  125. Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
  126. pid_max: default: 32768 minimum: 301
  127. Mount-cache hash table entries: 512
  128. CPU: Testing write buffer coherency: ok
  129. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  130. Calibrating local timer... 399.74MHz.
  131. 2 cores has been found
  132. Setting up static identity map for 0xc0012660 - 0xc0012694
  133. L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
  134. CPU1: Booted secondary processor
  135. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  136. Brought up 2 CPUs
  137. SMP: Total of 2 processors activated (3188.32 BogoMIPS).
  138. NET: Registered protocol family 16
  139. DMA: preallocated 256 KiB pool for atomic coherent allocations
  140. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  141. found remapped nvram on sflash
  142. CCA UART Clock Config: Sel=1 Ovr=1 Div=48
  143. CCA UART Clock rate 100000000Hz
  144. bio: create slab <bio-0> at 0
  145. Switching to clocksource mpcore_gtimer
  146. NET: Registered protocol family 2
  147. TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  148. TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  149. TCP: Hash tables configured (established 1024 bind 1024)
  150. TCP: reno registered
  151. UDP hash table entries: 256 (order: 1, 8192 bytes)
  152. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  153. NET: Registered protocol family 1
  154. init gpio code
  155. Buffalo WZR-1750DHP
  156. PCI: no core
  157. PCI: no core
  158. PCI: scanning bus 0
  159. PCI host bridge to bus 0000:00
  160. pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
  161. pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  162. pci_bus 0000:00: root bus resource [bus 00-ff]
  163. PCI: Fixing up bus 0
  164. PCIE1 link=1
  165. PCIE1 switching to GEN2
  166. PCIE1 link=1
  167. PCI host bridge to bus 0001:00
  168. pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
  169. pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
  170. PCI: Fixing up bus 0
  171. PCI: bus0: Fast back to back transfers disabled
  172. PCI: Fixing up bus 1
  173. PCI: bus1: Fast back to back transfers disabled
  174. pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  175. pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
  176. pci 0001:00:00.0: PCI bridge to [bus 01]
  177. pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  178. PCIE2 link=1
  179. PCIE2 switching to GEN2
  180. PCIE2 link=1
  181. PCI host bridge to bus 0002:00
  182. pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
  183. pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
  184. PCI: Fixing up bus 0
  185. PCI: bus0: Fast back to back transfers disabled
  186. PCI: Fixing up bus 2
  187. PCI: bus2: Fast back to back transfers disabled
  188. pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  189. pci 0002:02:00.0: BAR 0: assigned [mem 0x40000000-0x40003fff 64bit]
  190. pci 0002:00:00.0: PCI bridge to [bus 02]
  191. pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  192. PCIE3 link=0
  193. Error creating gpio class
  194. squashfs: version 3.0 (2006/03/15) Phillip Lougher
  195. msgmni has been set to 239
  196. alg: No test for stdrng (krng)
  197. io scheduler noop registered (default)
  198. io scheduler cfq registered
  199. Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  200. serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550
  201. console [ttyS0] enabled
  202. serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
  203. brd: module loaded
  204. loop: module loaded
  205. Boot partition size = 262144(0x40000)
  206. Creating 3 MTD partitions on "bcmsflash":
  207. 0x000000000000-0x000000040000 : "boot"
  208. 0x0000000f0000-0x000000100000 : "nvram_cfe"
  209. 0x0000000e0000-0x0000000f0000 : "nvram"
  210. Found a Esmt NAND flash:
  211. Total size: 128MB
  212. Block size: 128KB
  213. Page Size: 2048B
  214. OOB Size: 64B
  215. Sector size: 512B
  216. Spare size: 16B
  217. ECC level: 8 (8-bit)
  218. Device ID: 0x92 0xf1 0x80 0x95 0x40 0x7f
  219. lookup_nflash_rootfs_offset: offset = 0x0, 0x20000
  220. found TRX Header on nflash!
  221. nflash: squash filesystem with lzma found at block 11
  222. Creating 2 MTD partitions on "nflash":
  223. 0x000000000000-0x000002000000 : "linux"
  224. 0x000000160000-0x000002000000 : "rootfs"
  225. tun: Universal TUN/TAP device driver, 1.6
  226. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  227. PPP generic driver version 2.4.2
  228. PPP BSD Compression module registered
  229. PPP Deflate Compression module registered
  230. PPP MPPE Compression module registered
  231. NET: Registered protocol family 24
  232. GACT probability NOT on
  233. Mirror/redirect action on
  234. Failed to load ipt action
  235. Simple TC action Loaded
  236. netem: version 1.3
  237. u32 classifier
  238. Performance counters on
  239. input device check on
  240. Actions configured
  241. Netfilter messages via NETLINK v0.30.
  242. nf_conntrack version 0.5.0 (8057 buckets, 32228 max)
  243. nf_conntrack_rtsp v0.6.21 loading
  244. xt_time: kernel timezone is -0000
  245. ip_set: protocol 6
  246. gre: GRE over IPv4 demultiplexor driver
  247. nf_nat_rtsp v0.6.21 loading
  248. ip_tables: (C) 2000-2006 Netfilter Core Team
  249. TCP: bic registered
  250. TCP: cubic registered
  251. TCP: westwood registered
  252. TCP: highspeed registered
  253. TCP: hybla registered
  254. TCP: htcp registered
  255. TCP: vegas registered
  256. TCP: veno registered
  257. TCP: scalable registered
  258. TCP: lp registered
  259. TCP: yeah registered
  260. TCP: illinois registered
  261. NET: Registered protocol family 17
  262. Bridge firewalling registered
  263. 8021q: 802.1Q VLAN Support v1.8
  264. found cfe nvram
  265. Key type encrypted registered
  266. Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
  267. NAND device: Manufacturer ID: 0x92, Chip ID: 0xf1 (Eon NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
  268. Spare area=64 eccbytes 56, ecc bytes located at:
  269. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
  270. Available 7 bytes at (off,len):
  271. (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
  272. Driver must set ecc.strength when using hardware ECC
  273. Scanning device for bad blocks
  274. Bad eraseblock 1023 at 0x000007fe0000
  275. Options: NO_SUBPAGE_WRITE,
  276. Creating 1 MTD partitions on "brcmnand":
  277. 0x000002000000-0x000008000000 : "ddwrt"
  278. VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  279. Freeing unused kernel memory: 232K (c0350000 - c038a000)
  280. start service
  281. starting Architecture code for northstar
  282. starting hotplug
  283. Jan 1 00:00:04 udevtrigger[310]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directorystart MSTP Daemon
  284. 1970-01-01 00:00:05 main: Sanity checks succeeded
  285. done
  286. softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
  287. try modules for ethernet adapters
  288. et: module license 'Proprietary' taints kernel.
  289. Disabling lock debugging due to kernel taint
  290. et_module_init: passivemode set to 0x0
  291. et_module_init: txworkq set to 0x0
  292. et_module_init: et_txq_thresh set to 0x400
  293. et0: online cpus 2
  294. eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.86 (r456083)
  295. roboswitch: Probing device 'eth0'
  296. roboswitch: trying a 53011! at eth0
  297. roboswitch: found a 53011! at eth0
  298. PCI: Enabling device 0002:02:00.0 (0140 -> 0142)
  299. [USB] checking...
  300. umount: can't umount /mnt: No such file or directory
  301. rmmod: usblp: No such file or directory
  302. rmmod: printer: No such file or directory
  303. rmmod: usb-storage: No such file or directory
  304. rmmod: sr_mod: No such file or directory
  305. rmmod: cdrom: No such file or directory
  306. rmmod: sd_mod: No such file or directory
  307. rmmod: scsi_wait_scan: No such file or directory
  308. rmmod: scsi_mod: No such file or directory
  309. rmmod: usbmisc_imx: No such file or directory
  310. rmmod: ci13xxx_imx: No such file or directory
  311. rmmod: ci_hdrc: No such file or directory
  312. rmmod: phy-mxs-usb: No such file or directory
  313. rmmod: fsl-mph-dr-of: No such file or directory
  314. rmmod: usb-libusual: No such file or directory
  315. rmmod: dwc_otg: No such file or directory
  316. rmmod: xhci-hcd: No such file or directory
  317. rmmod: usb-ohci: No such file or directory
  318. rmmod: ohci-hcd: No such file or directory
  319. rmmod: uhci-hcd: No such file or directory
  320. rmmod: usb-uhci: No such file or directory
  321. rmmod: ehci-pci: No such file or directory
  322. rmmod: ehci-platform: No such file or directory
  323. rmmod: ehci-hcd: No such file or directory
  324. rmmod: fsl-mph-dr-of: No such file or directory
  325. rmmod: usbcore: No such file or directory
  326. rmmod: usb-common: No such file or directory
  327. rmmod: xfs: No such file or directory
  328. rmmod: msdos: No such file or directory
  329. rmmod: vfat: No such file or directory
  330. rmmod: fat: No such file or directory
  331. rmmod: nls_utf8: No such file or directory
  332. rmmod: nls_iso8859-2: No such file or directory
  333. rmmod: nls_iso8859-1: No such file or directory
  334. rmmod: nls_cp437: No such file or directory
  335. rmmod: nls_cp932: No such file or directory
  336. rmmod: nls_cp936: No such file or directory
  337. rmmod: nls_cp950: No such file or directory
  338. rmmod: nls_base: No such file or directory
  339. rmmod: ext3: No such file or directory
  340. rmmod: jbd: No such file or directory
  341. rmmod: ext2: No such file or directory
  342. rmmod: mbcache: No such file or directory
  343. rmmod: fuse: No such file or directory
  344. deadlock detected, try to fix it
  345. vconfig: ioctl error for add: File exists
  346. vconfig: ioctl error for add: File exists
  347. eth0: mixed HW and IP checksum settings.
  348. eth1: Operation not supported
  349. wl0.1: No such device
  350. wl0.2: No such device
  351. wl0.3: No such device
  352. eth1: Operation not permitted
  353. nbw = 20
  354. channel 6, val 20
  355. C000, 1000, 0, 6
  356. spec D006
  357. eth1: Invalid argument
  358. eth1: Operation not supported
  359. eth1: Operation not supported
  360. eth1: Operation not supported
  361. eth1: Operation not supported
  362. eth1: Operation not supported
  363. eth1: Operation not supported
  364. eth1: Operation not supported
  365. eth1: Operation not supported
  366. eth1: Operation not supported
  367. eth1: Operation not supported
  368. eth1: Operation not supported
  369. eth1: Operation not supported
  370. eth1: Operation not supported
  371. eth1: Operation not supported
  372. eth1: Operation not supported
  373. eth1: Operation not supported
  374. eth1: Operation not supported
  375. eth1: Operation not supported
  376. eth1: Operation not supported
  377. eth1: Operation not supported
  378. eth1: Operation not supported
  379. eth1: Operation not supported
  380. eth1: Operation not supported
  381. eth1: Operation not supported
  382. eth1: Operation not supported
  383. eth1: Operation not supported
  384. eth1: Operation not supported
  385. eth1: Operation not supported
  386. eth1: Operation not supported
  387. txpwr1 Set tx power in in various units. Choose one of (default: dbm):
  388. -d dbm units
  389. -q quarter dbm units
  390. -m milliwatt units
  391. Can be combined with:
  392. -o turn on override to disable regulatory and other limitations
  393. Use wl txpwr -1 to restore defaults
  394.  
  395. eth1: Operation not supported
  396. eth1: Operation not supported
  397. wl: Unsupported
  398. wl: Not up
  399. eth2: Operation not supported
  400. wl1.1: No such device
  401. wl1.2: No such device
  402. wl1.3: No such device
  403. eth2: Operation not permitted
  404. eth2: Argument list too long
  405. eth2: Operation not supported
  406. eth2: Operation not supported
  407. eth2: Operation not supported
  408. eth2: Operation not supported
  409. eth2: Operation not supported
  410. eth2: Operation not supported
  411. eth2: Operation not supported
  412. eth2: Operation not supported
  413. eth2: Operation not supported
  414. eth2: Operation not supported
  415. eth2: Operation not supported
  416. eth2: Operation not supported
  417. eth2: Operation not supported
  418. eth2: Operation not supported
  419. eth2: Operation not supported
  420. eth2: Operation not supported
  421. eth2: Operation not supported
  422. eth2: Operation not supported
  423. eth2: Operation not supported
  424. eth2: Operation not supported
  425. eth2: Operation not supported
  426. eth2: Operation not supported
  427. eth2: Operation not supported
  428. eth2: Operation not supported
  429. eth2: Operation not supported
  430. eth2: Operation not supported
  431. eth2: Operation not supported
  432. eth2: Operation not supported
  433. eth2: Operation not supported
  434. txpwr1 Set tx power in in various units. Choose one of (default: dbm):
  435. -d dbm units
  436. -q quarter dbm units
  437. -m milliwatt units
  438. Can be combined with:
  439. -o turn on override to disable regulatory and other limitations
  440. Use wl txpwr -1 to restore defaults
  441.  
  442. eth2: Operation not supported
  443. eth2: Operation not supported
  444. wl: Unsupported
  445. device br0 entered promiscuous mode
  446. CTL_set_cist_bridge_config: Got return code 0, -1
  447. Couldn't find bridge with index 8
  448.  
  449. Couldn't change bridge bridge_forward_delay
  450. killall: ead: no process killed
  451. br0: Invalid argument
  452. device vlan1 entered promiscuous mode
  453. device eth0 entered promiscuous mode
  454. eth1: Operation not supported
  455. wl0.1: No such device
  456. wl0.2: No such device
  457. wl0.3: No such device
  458. eth1: Operation not permitted
  459. eth1: Invalid argument
  460. nbw = 20
  461. channel 6, val 20
  462. C000, 1000, 0, 6
  463. spec D006
  464. eth1: Invalid argument
  465. eth1: Operation not supported
  466. eth1: Operation not supported
  467. eth1: Operation not supported
  468. eth1: Operation not supported
  469. eth1: Operation not supported
  470. eth1: Operation not supported
  471. eth1: Operation not supported
  472. eth1: Operation not supported
  473. eth1: Operation not supported
  474. eth1: Operation not supported
  475. eth1: Operation not supported
  476. eth1: Operation not supported
  477. eth1: Operation not supported
  478. eth1: Operation not supported
  479. eth1: Operation not supported
  480. eth1: Operation not supported
  481. eth1: Operation not supported
  482. eth1: Operation not supported
  483. eth1: Operation not supported
  484. eth1: Operation not supported
  485. eth1: Operation not supported
  486. eth1: Operation not supported
  487. eth1: Operation not supported
  488. eth1: Operation not supported
  489. eth1: Operation not supported
  490. eth1: Operation not supported
  491. eth1: Operation not supported
  492. eth1: Operation not supported
  493. eth1: Operation not supported
  494. eth1: Operation not supported
  495. txpwr1 Set tx power in in various units. Choose one of (default: dbm):
  496. -d dbm units
  497. -q quarter dbm units
  498. -m milliwatt units
  499. Can be combined with:
  500. -o turn on override to disable regulatory and other limitations
  501. Use wl txpwr -1 to restore defaults
  502.  
  503. eth1: Operation not supported
  504. eth1: Operation not supported
  505. wl: Unsupported
  506. device eth1 entered promiscuous mode
  507. br0: Invalid argument
  508. eth2: Operation not supported
  509. wl1.1: No such device
  510. wl1.2: No such device
  511. wl1.3: No such device
  512. eth2: Operation not permitted
  513. eth2: Invalid argument
  514. eth2: Argument list too long
  515. eth2: Operation not supported
  516. eth2: Operation not supported
  517. eth2: Operation not supported
  518. eth2: Operation not supported
  519. eth2: Operation not supported
  520. eth2: Operation not supported
  521. eth2: Operation not supported
  522. eth2: Operation not supported
  523. eth2: Operation not supported
  524. eth2: Operation not supported
  525. eth2: Operation not supported
  526. eth2: Operation not supported
  527. eth2: Operation not supported
  528. eth2: Operation not supported
  529. eth2: Operation not supported
  530. eth2: Operation not supported
  531. eth2: Operation not supported
  532. eth2: Operation not supported
  533. eth2: Operation not supported
  534. eth2: Operation not supported
  535. eth2: Operation not supported
  536. eth2: Operation not supported
  537. eth2: Operation not supported
  538. eth2: Operation not supported
  539. eth2: Operation not supported
  540. eth2: Operation not supported
  541. eth2: Operation not supported
  542. eth2: Operation not supported
  543. eth2: Operation not supported
  544. txpwr1 Set tx power in in various units. Choose one of (default: dbm):
  545. -d dbm units
  546. -q quarter dbm units
  547. -m milliwatt units
  548. Can be combined with:
  549. -o turn on override to disable regulatory and other limitations
  550. Use wl txpwr -1 to restore defaults
  551.  
  552. eth2: Operation not supported
  553. eth2: Operation not supported
  554. wl: Unsupported
  555. device eth2 entered promiscuous mode
  556. /bin/sh: eadbr0: port 3(eth2) entered forwarding state
  557. : nbr0: port 3(eth2) entered forwarding state
  558. ot br0: port 2(eth1) entered forwarding state
  559. foubr0: port 2(eth1) entered forwarding state
  560. nd
  561. br0: port 1(vlan1) entered forwarding state
  562.  
  563. br0: port 1(vlan1) entered forwarding state
  564. device br0 left promiscuous mode
  565. device br0 entered promiscuous mode
  566. ifconfig: ioctl 0x8914 failed: Cannot assign requested address
  567. device br0 left promiscuous mode
  568. rmmod: bonding: No such file or directory
  569. function start_hwmon not found
  570. cp: can't stat '/tmp/mycron.d/*': No such file or directory
  571. rmmod: n_hdlc: No such file or directory
  572. device vlan2 entered promiscuous mode
  573. device vlan2 left promiscuous mode
  574. udhcpc (v1.22.1) started
  575. cp: can't stat '/jffs/mycron.d/*': No such file or directory
  576. cp: can't stat '/mmc/mycron.d/*': No such file or directory
  577. Sending discover...
  578. SIOCGIFFLAGS: No such device
  579. /bin/sh: /opt/etc/init.d/rcS: not found
  580. /bin/sh: /jffs/etc/init.d/rcS: not found
  581. /bin/sh: /mmc/etc/init.d/rcS: not found
  582. rmmod: ipt_webstr: No such fileSending discover...
  583.  
  584. DD-WRT v24-sp2 std (c) 2014 NewMedia-NET GmbH
  585. Release: 06/12/14 (SVN revision: 23709c)
  586.  
  587. DD-WRT login: root
  588. Password: br0: port 3(eth2) entered forwarding state
  589. br0: port 2(eth1) entered forwarding state
  590. br0: port 1(vlan1) entered forwarding state
  591.  
  592. ==========================================================
  593.  
  594. ____ ___ __ ______ _____ ____ _ _
  595. | _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
  596. || | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
  597. ||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
  598. |___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|
  599.  
  600. DD-WRT v24-sp2
  601. http://www.dd-wrt.com
  602.  
  603. ==========================================================
  604. Jan 1 00:00:19 login[1328]: root login on 'console'
  605.  
  606. BusyBox v1.22.1 (2014-06-12 06:51:23 CEST) built-in shell (ash)
  607. Enter 'help' for a list of built-in commands.
  608.  
  609. root@DD-WRT:~#
  610. root@DD-WRT:~# df -h
  611. Filesystem Size Used Available Use% Mounted on
  612. rootfs 21.1M 21.1M 0 100% /
  613. /dev/root 21.1M 21.1M 0 100% /
  614. root@DD-WRT:~#
  615. root@DD-WRT:~# ls /etc
  616. asterisk init.d passwd
  617. cert.pem ipkg.conf port-id-map
  618. cfe issue postinit
  619. cidrroute.sh kaid preinit
  620. comgt key.pem privkey.pem
  621. config l7-protocols privoxy
  622. cron.d langpack profile
  623. defaults.bin ld.so.cache protocols
  624. dictionary ld.so.conf resolv.conf
  625. dictionary.microsoft lease_update.sh services
  626. ethertypes minidlna.conf snmp
  627. freeradius mke2fs.conf squid
  628. fstab motd terminfo
  629. group mtab wifidog-msg.html
  630. hosts nocat.conf wl_snmpd.sh
  631. hotplug2-common.rules nvram www
  632. hotplug2-createmtd.sh openser xl2tpd
  633. hotplug2.rules openvpnlog.sh zabbix_template.xml
  634. hotplug2.startup openvpnstate.sh
  635. hso openvpnstatus.sh
  636. root@DD-WRT:~# Sending discover...
  637. Sending discover...
  638. Sending discover...
  639.  
  640. root@DD-WRT:~# Sending discover...
  641. Sending discover...
  642. Sending discover...
  643. Sending discover...
  644. Sending discover...
  645. Sending discover...
  646. connect: Network is unreachable
  647. connect: Network is unreachable
  648. connect: Network is unreachable
  649. gethostbyname: Network is unreachable
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!