API tools faq
paste
Guest User

mtb006 debian boot log

a guest
Jan 12th, 2013
98
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 49.14 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2012.10-04266-g20efdee-dirty (Jan 10 2013 - 20:49:17)
  2. DRAM: 512MB
  3. SUNXI SD/MMC: 0
  4.  
  5.  
  6. U-Boot 2012.10-04266-g20efdee-dirty (Jan 10 2013 - 20:49:17) Allwinner Technology
  7.  
  8. CPU: SUNXI Family
  9. Board: STV-301
  10. I2C: ready
  11. DRAM: 512 MiB
  12. MMC: SUNXI SD/MMC: 0
  13. In: serial
  14. Out: serial
  15. Err: serial
  16. Hit any key to stop autoboot: 0
  17. reading evb.bin
  18.  
  19. 43176 bytes read
  20. reading uImage
  21.  
  22. 4096220 bytes read
  23. ## Booting kernel from Legacy Image at 48000000 ...
  24. Image Name: Linux-3.0.57
  25. Image Type: ARM Linux Kernel Image (uncompressed)
  26. Data Size: 4096156 Bytes = 3.9 MiB
  27. Load Address: 40008000
  28. Entry Point: 40008000
  29. Verifying Checksum ... OK
  30. Loading Kernel Image ... OK
  31. OK
  32.  
  33. Starting kernel ...
  34.  
  35. <6>Initializing cgroup subsys cpuset
  36. <5>Linux version 3.0.57 (tux@tux-HP-2230s) (gcc version 4.7.3 20121205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2012.12-20121214 - Linar3
  37. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  38. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  39. Machine: sun4i
  40. <6>Memory cut off:
  41. <6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  42. <4>Ignoring unrecognised tag 0x00000000
  43. <6>Memory Reserved:
  44. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  45. <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
  46. <6> G2D : 0x58000000 - 0x58ffffff ( 16 MB)
  47. <6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  48. Memory policy: ECC disabled, Data cache writeback
  49. <6>BROM Ver: 1100 1100 1623
  50. <6>chip-id: A10 (AW1623 revision C)
  51. <7>On node 0 totalpages: 114688
  52. <7>free_area_init_node: node 0, pgdat c07ba558, node_mem_map c0878000
  53. <7> Normal zone: 896 pages used for memmap
  54. <7> Normal zone: 0 pages reserved
  55. <7> Normal zone: 113792 pages, LIFO batch:31
  56. <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  57. <7>pcpu-alloc: [0] 0
  58. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  59. <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 init=/init loglevel=8 rootfstype=ext4 rootwait
  60. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  61. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  62. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  63. <6>Memory: 448MB = 448MB total
  64. <5>Memory: 314916k/314916k available, 143836k reserved, 0K highmem
  65. <5>Virtual kernel memory layout:
  66. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  67. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  68. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  69. vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
  70. lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  71. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  72. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  73. .init : 0xc0008000 - 0xc0032000 ( 168 kB)
  74. .text : 0xc0032000 - 0xc077a000 (7456 kB)
  75. .data : 0xc077a000 - 0xc07c2820 ( 291 kB)
  76. .bss : 0xc07c2844 - 0xc08773d0 ( 723 kB)
  77. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  78. <6>NR_IRQS:96 nr_irqs:96 96
  79. <6>timer0: Periodic Mode
  80. <6>Console: colour dummy device 80x30
  81. <6>Calibrating delay loop... <c>1001.88 BogoMIPS (lpj=5009408)
  82. <6>pid_max: default: 32768 minimum: 301
  83. <6>Mount-cache hash table entries: 512
  84. <6>Initializing cgroup subsys cpuacct
  85. <6>Initializing cgroup subsys devices
  86. <6>Initializing cgroup subsys freezer
  87. <6>Initializing cgroup subsys blkio
  88. <6>CPU: Testing write buffer coherency: ok
  89. <6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  90. <6>devtmpfs: initialized
  91. <6>print_constraints: dummy:
  92. <6>NET: Registered protocol family 16
  93. <6>hw-breakpoint: debug architecture 0x4 unsupported.
  94. [ccmu] try to set apb1 parent to sata_pll failed!
  95. SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  96. <6>Initialize DMAC OK
  97. <6>bio: create slab <bio-0> at 0
  98. <5>SCSI subsystem initialized
  99. <7>libata version 3.00 loaded.
  100. <6>usbcore: registered new interface driver usbfs
  101. <6>usbcore: registered new interface driver hub
  102. <6>usbcore: registered new device driver usb
  103. <6>Advanced Linux Sound Architecture Driver Version 1.0.24.
  104. <6>Bluetooth: Core ver 2.16
  105. <6>NET: Registered protocol family 31
  106. <6>Bluetooth: HCI device and connection manager initialized
  107. <6>Bluetooth: HCI socket layer initialized
  108. <6>Bluetooth: L2CAP socket layer initialized
  109. <6>Bluetooth: SCO socket layer initialized
  110. Init eGon pin module V2.0
  111. <6>Switching to clocksource aw 64bits couter
  112. <6>cfg80211: Calling CRDA to update world regulatory domain
  113. <5>FS-Cache: Loaded
  114. <6>CacheFiles: Loaded
  115. <6>Switched to NOHz mode on CPU #0
  116. [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  117. [sw_hcd0]: usb host driver initialize........
  118. [sw_hcd0]: open_usb_clock
  119. [sw_hcd0]: host_init_state = 0
  120. [sw_hcd0]: platform is usb host
  121. [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  122. [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  123. <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  124. <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  125. <6>hub 1-0:1.0: USB hub found
  126. <6>hub 1-0:1.0: 1 port detected
  127. wrn: hcd is not enable, need not start hcd
  128. [sw_hcd0]: sw_usb_host0_disable start
  129. -------sw_hcd0_soft_disconnect---------
  130. [sw_hcd_host0]: Set USB Power OFF
  131. wrn: hcd is not enable, need not stop hcd
  132. [sw_hcd0]: close_usb_clock
  133. [sw_hcd0]: sw_usb_host0_disable end
  134. [sw_udc]: udc_init: version 20080411
  135. <6>NET: Registered protocol family 2
  136. <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  137. <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  138. <6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  139. <6>TCP: Hash tables configured (established 16384 bind 16384)
  140. <6>TCP reno registered
  141. <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
  142. <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  143. <6>NET: Registered protocol family 1
  144. <6>RPC: Registered named UNIX socket transport module.
  145. <6>RPC: Registered udp transport module.
  146. <6>RPC: Registered tcp transport module.
  147. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  148. [pm]aw_pm_init!
  149. <6>audit: initializing netlink socket (disabled)
  150. <5>type=2000 audit(0.339:1): initialized
  151. <5>VFS: Disk quotas dquot_6.5.2
  152. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  153. <6>NTFS driver 2.1.30 [Flags: R/W].
  154. <6>fuse init (API version 7.16)
  155. <6>msgmni has been set to 615
  156. <6>alg: No test for stdrng (krng)
  157. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  158. <6>io scheduler noop registered
  159. <6>io scheduler deadline registered
  160. <6>io scheduler cfq registered (default)
  161. <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  162. <6>serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  163. [ 0.000000] Initializing cgroup subsys cpuset
  164. [ 0.000000] Linux version 3.0.57 (tux@tux-HP-2230s) (gcc version 4.7.3 20121205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2012.12-20123
  165. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  166. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  167. [ 0.000000] Machine: sun4i
  168. [ 0.000000] Memory cut off:
  169. [ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  170. [ 0.000000] Ignoring unrecognised tag 0x00000000
  171. [ 0.000000] Memory Reserved:
  172. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  173. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  174. [ 0.000000] G2D : 0x58000000 - 0x58ffffff ( 16 MB)
  175. [ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  176. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  177. [ 0.000000] BROM Ver: 1100 1100 1623
  178. [ 0.000000] chip-id: A10 (AW1623 revision C)
  179. [ 0.000000] On node 0 totalpages: 114688
  180. [ 0.000000] free_area_init_node: node 0, pgdat c07ba558, node_mem_map c0878000
  181. [ 0.000000] Normal zone: 896 pages used for memmap
  182. [ 0.000000] Normal zone: 0 pages reserved
  183. [ 0.000000] Normal zone: 113792 pages, LIFO batch:31
  184. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  185. [ 0.000000] pcpu-alloc: [0] 0
  186. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  187. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 init=/init loglevel=8 rootfstype=ext4 rootwait
  188. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  189. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  190. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  191. [ 0.000000] Memory: 448MB = 448MB total
  192. [ 0.000000] Memory: 314916k/314916k available, 143836k reserved, 0K highmem
  193. [ 0.000000] Virtual kernel memory layout:
  194. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  195. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  196. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  197. [ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
  198. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  199. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  200. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  201. [ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
  202. [ 0.000000] .text : 0xc0032000 - 0xc077a000 (7456 kB)
  203. [ 0.000000] .data : 0xc077a000 - 0xc07c2820 ( 291 kB)
  204. [ 0.000000] .bss : 0xc07c2844 - 0xc08773d0 ( 723 kB)
  205. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  206. [ 0.000000] NR_IRQS:96 nr_irqs:96 96
  207. [ 0.000000] timer0: Periodic Mode
  208. [ 0.000000] Console: colour dummy device 80x30
  209. [ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  210. [ 0.040000] pid_max: default: 32768 minimum: 301
  211. [ 0.040000] Mount-cache hash table entries: 512
  212. [ 0.050000] Initializing cgroup subsys cpuacct
  213. [ 0.050000] Initializing cgroup subsys devices
  214. [ 0.050000] Initializing cgroup subsys freezer
  215. [ 0.060000] Initializing cgroup subsys blkio
  216. [ 0.060000] CPU: Testing write buffer coherency: ok
  217. [ 0.060000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  218. [ 0.070000] devtmpfs: initialized
  219. [ 0.070000] print_constraints: dummy:
  220. [ 0.080000] NET: Registered protocol family 16
  221. [ 0.080000] hw-breakpoint: debug architecture 0x4 unsupported.
  222. [ 0.090000] [ccmu] try to set apb1 parent to sata_pll failed!
  223. [ 0.090000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  224. [ 0.090000] Initialize DMAC OK
  225. [ 0.100000] bio: create slab <bio-0> at 0
  226. [ 0.100000] SCSI subsystem initialized
  227. [ 0.100000] libata version 3.00 loaded.
  228. [ 0.110000] usbcore: registered new interface driver usbfs
  229. [ 0.110000] usbcore: registered new interface driver hub
  230. [ 0.120000] usbcore: registered new device driver usb
  231. [ 0.120000] Advanced Linux Sound Architecture Driver Version 1.0.24.
  232. [ 0.130000] Bluetooth: Core ver 2.16
  233. [ 0.130000] NET: Registered protocol family 31
  234. [ 0.130000] Bluetooth: HCI device and connection manager initialized
  235. [ 0.140000] Bluetooth: HCI socket layer initialized
  236. [ 0.140000] Bluetooth: L2CAP socket layer initialized
  237. [ 0.140000] Bluetooth: SCO socket layer initialized
  238. [ 0.150000] Init eGon pin module V2.0
  239. [ 0.150000] Switching to clocksource aw 64bits couter
  240. [ 0.160000] cfg80211: Calling CRDA to update world regulatory domain
  241. [ 0.160000] FS-Cache: Loaded
  242. [ 0.160000] CacheFiles: Loaded
  243. [ 0.170000] Switched to NOHz mode on CPU #0
  244. [ 0.170000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  245. [ 0.170000] [sw_hcd0]: usb host driver initialize........
  246. [ 0.180000] [sw_hcd0]: open_usb_clock
  247. [ 0.200000] [sw_hcd0]: host_init_state = 0
  248. [ 0.200000] [sw_hcd0]: platform is usb host
  249. [ 0.210000] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  250. [ 0.220000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  251. [ 0.230000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  252. [ 0.230000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  253. [ 0.240000] hub 1-0:1.0: USB hub found
  254. [ 0.240000] hub 1-0:1.0: 1 port detected
  255. [ 0.240000] wrn: hcd is not enable, need not start hcd
  256. [ 0.250000] [sw_hcd0]: sw_usb_host0_disable start
  257. [ 0.250000] -------sw_hcd0_soft_disconnect---------
  258. [ 0.250000] [sw_hcd_host0]: Set USB Power OFF
  259. [ 0.250000] wrn: hcd is not enable, need not stop hcd
  260. [ 0.260000] [sw_hcd0]: close_usb_clock
  261. [ 0.260000] [sw_hcd0]: sw_usb_host0_disable end
  262. [ 0.270000] [sw_udc]: udc_init: version 20080411
  263. [ 0.270000] NET: Registered protocol family 2
  264. [ 0.270000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  265. [ 0.280000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  266. [ 0.290000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  267. [ 0.290000] TCP: Hash tables configured (established 16384 bind 16384)
  268. [ 0.300000] TCP reno registered
  269. [ 0.300000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  270. [ 0.300000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  271. [ 0.310000] NET: Registered protocol family 1
  272. [ 0.310000] RPC: Registered named UNIX socket transport module.
  273. [ 0.320000] RPC: Registered udp transport module.
  274. [ 0.320000] RPC: Registered tcp transport module.
  275. [ 0.330000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  276. [ 0.330000] [pm]aw_pm_init!
  277. [ 0.330000] audit: initializing netlink socket (disabled)
  278. [ 0.340000] type=2000 audit(0.339:1): initialized
  279. [ 0.350000] VFS: Disk quotas dquot_6.5.2
  280. [ 0.350000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  281. [ 0.360000] NTFS driver 2.1.30 [Flags: R/W].
  282. [ 0.360000] fuse init (API version 7.16)
  283. [ 0.370000] msgmni has been set to 615
  284. [ 0.370000] alg: No test for stdrng (krng)
  285. [ 0.380000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  286. [ 0.380000] io scheduler noop registered
  287. [ 0.390000] io scheduler deadline registered
  288. [ 0.390000] io scheduler cfq registered (default)
  289. [ 0.390000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  290. [ 0.420000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  291. <6>console [ttyS0] enabled
  292. [ 1.100000] console [ttyS0] enabled
  293. [uart]: used uart info.: 0x05
  294. [ 1.110000] [uart]: used uart info.: 0x05
  295. <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  296. [ 1.130000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  297. [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
  298. [ 1.150000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
  299. <6>sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  300. [ 1.180000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  301.  
  302.  
  303. insmod_host_driver
  304.  
  305. [ 1.190000]
  306. [ 1.190000]
  307. [ 1.190000] insmod_host_driver
  308. [ 1.190000]
  309. [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
  310. [ 1.200000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
  311. [sw_hcd0]: [ 1.220000] [sw_hcd0]: sw_usb_host0_enable start
  312. sw_usb_host0_enable start
  313. -------sw_hcd0_soft_disconnect---------
  314. [ 1.220000] -------sw_hcd0_soft_disconnect---------
  315. [sw_hcd0]: [ 1.230000] [sw_hcd0]: <7>G2D: drv_g2d_init
  316.  
  317. [ 1.240000] G2D: drv_g2d_init
  318. <6>G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
  319. [ 1.240000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
  320. open_usb_clock
  321. [ 1.250000] open_usb_clock
  322. <6>G2D: head:d8000000,tail:d9000000
  323. [ 1.260000] G2D: head:d8000000,tail:d9000000
  324. <6>G2D: Module initialized.major:252
  325. [ 1.260000] G2D: Module initialized.major:252
  326. <6>brd: module loaded
  327. [ 1.280000] brd: module loaded
  328. <6>loop: module loaded
  329. [ 1.280000] loop: module loaded
  330. [NAND]nand driver, init.
  331. [ 1.300000] [NAND]nand driver, init.
  332. cmu_clk is 360
  333. [ 1.300000] cmu_clk is 360
  334. [sw_hcd0]: host_init_state = 0
  335. [ 1.310000] [sw_hcd0]: host_init_state = 0
  336. nand clk init end
  337. [ 1.320000] nand clk init end
  338. [sw_hcd_host0]: Set USB Power ON
  339. [ 1.330000] [sw_hcd_host0]: Set USB Power ON
  340. [sw_hcd0]: [ 1.330000] [sw_hcd0]: offset 0xc: 0x6141
  341. offset 0xc: 0x6141
  342. offset 0x14: 0x82000008
  343. [ 1.340000] offset 0x14: 0x82000008
  344. sw_usb_host0_enable end
  345. [ 1.350000] sw_usb_host0_enable end
  346. [NAND] nand gpio_request
  347. [ 1.350000] [NAND] nand gpio_request
  348. [NAND] nand driver version: 0x2 0x9
  349. [ 1.360000] [NAND] nand driver version: 0x2 0x9
  350. nand interrupte register ok
  351. [ 1.370000] nand interrupte register ok
  352. ret of NFC_ChangMode is 0
  353. [ 1.370000] ret of NFC_ChangMode is 0
  354. dma_hdle is 0
  355. [ 1.380000] dma_hdle is 0
  356. dma_hdle is 10000008
  357. [ 1.380000] dma_hdle is 10000008
  358. cmu_clk is 360
  359. [ 1.390000] cmu_clk is 360
  360. nand clk init end
  361. [ 1.390000] nand clk init end
  362. offset 0xc: 0x6141
  363. [ 1.400000] offset 0xc: 0x6141
  364. offset 0x14: 0x82000007
  365. [ 1.400000] offset 0x14: 0x82000007
  366. The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 3891200
  367. [ 1.430000] The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 3891200
  368. The 1 disk name = bootloader, type = 0, class name = DISK, disk size = 32768
  369. [ 1.450000] The 1 disk name = bootloader, type = 0, class name = DISK, disk size = 32768
  370. The 2 disk name = env, type = 0, class name = DISK, disk size = 4096
  371. [ 1.470000] The 2 disk name = env, type = 0, class name = DISK, disk size = 4096
  372. The 3 disk name = boot, type = 0, class name = DISK, disk size = 65536
  373. [ 1.480000] The 3 disk name = boot, type = 0, class name = DISK, disk size = 65536
  374. The 4 disk name = system, type = 2, class name = DISK, disk size = 524288
  375. [ 1.490000] The 4 disk name = system, type = 2, class name = DISK, disk size = 524288
  376. The 5 disk name = data, type = 2, class name = DISK, disk size = 1048576
  377. [ 1.510000] The 5 disk name = data, type = 2, class name = DISK, disk size = 1048576
  378. The 6 disk name = misc, type = 2, class name = DISK, disk size = 2048
  379. [ 1.520000] The 6 disk name = misc, type = 2, class name = DISK, disk size = 2048
  380. The 7 disk name = recovery, type = 2, class name = DISK, disk size = 65536
  381. [ 1.540000] The 7 disk name = recovery, type = 2, class name = DISK, disk size = 65536
  382. The 8 disk name = cache, type = 2, class name = DISK, disk size = 262144
  383. [ 1.550000] The 8 disk name = cache, type = 2, class name = DISK, disk size = 262144
  384. The 9 disk name = private, type = 2, class name = DISK, disk size = 2048
  385. [ 1.560000] The 9 disk name = private, type = 2, class name = DISK, disk size = 2048
  386. The 10 disk name = sysrecovery, type = 2, class name = DISK, disk size = 655360
  387. [ 1.580000] The 10 disk name = sysrecovery, type = 2, class name = DISK, disk size = 655360
  388. The 11 disk name = UDISK, type = 0, class name = DISK, disk size = 0
  389. [ 1.590000] The 11 disk name = UDISK, type = 0, class name = DISK, disk size = 0
  390. The 11 disk size = 1226752
  391. [ 1.610000] The 11 disk size = 1226752
  392. part total count = 12
  393. [ 1.610000] part total count = 12
  394. <6> nand: unknown partition table
  395. [ 1.620000] nand: unknown partition table
  396. <6> nanda:
  397. [ 1.630000] nanda:
  398. <6> nandb: unknown partition table
  399. [ 1.630000] nandb: unknown partition table
  400. <6> nandc: unknown partition table
  401. [ 1.640000] nandc: unknown partition table
  402. <6> nandd: unknown partition table
  403. [ 1.650000] nandd: unknown partition table
  404. <6> nande: unknown partition table
  405. [ 1.660000] nande: unknown partition table
  406. <6> nandf: unknown partition table
  407. [ 1.670000] nandf: unknown partition table
  408. <6> nandg: unknown partition table
  409. [ 1.680000] nandg: unknown partition table
  410. <6> nandh: unknown partition table
  411. [ 1.690000] nandh: unknown partition table
  412. <6> nandi:
  413. [ 1.700000] nandi:
  414. <6> nandj: unknown partition table
  415. [ 1.700000] nandj: unknown partition table
  416. <6> nandk:
  417. [ 1.710000] nandk:
  418. <6>benn: nand probe enter
  419. [ 1.710000] benn: nand probe enter
  420. [NAND]nand driver, ok.
  421. [ 1.720000] [NAND]nand driver, ok.
  422. <6>wemac Ethernet Driver, V1.01 in file:drivers/net/sun4i/sun4i_wemac.c
  423. [ 1.720000] wemac Ethernet Driver, V1.01 in file:drivers/net/sun4i/sun4i_wemac.c
  424. <6>[EMAC] ahb clk enable
  425. [ 1.740000] [EMAC] ahb clk enable
  426. <6>[EMAC] ahb gate clk: 0x26141
  427. [ 1.740000] [EMAC] ahb gate clk: 0x26141
  428. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  429. [ 1.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  430. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  431. [ 1.790000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  432. [sw-ehci1]: open clock
  433. [ 1.800000] [sw-ehci1]: open clock
  434. [sw-ehci1]: Set USB Power ON
  435. [ 1.830000] [sw-ehci1]: Set USB Power ON
  436. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  437. [ 1.830000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  438. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  439. [ 1.850000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  440. <6>sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  441. [ 1.860000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  442. <6>sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  443. [ 1.890000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  444. <6>hub 2-0:1.0: USB hub found
  445. [ 1.900000] hub 2-0:1.0: USB hub found
  446. <6>hub 2-0:1.0: 1 port detected
  447. [ 1.900000] hub 2-0:1.0: 1 port detected
  448. [sw-ohci1]: open clock
  449. [ 1.910000] [sw-ohci1]: open clock
  450. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  451. [ 1.930000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  452. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  453. [ 1.950000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  454. <6>sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  455. [ 1.960000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  456. ehci_irq: port change detect
  457. [ 2.000000] ehci_irq: port change detect
  458. <6>hub 3-0:1.0: USB hub found
  459. [ 2.030000] hub 3-0:1.0: USB hub found
  460. <6>hub 3-0:1.0: 1 port detected
  461. [ 2.040000] hub 3-0:1.0: 1 port detected
  462. [sw-ehci2]: open clock
  463. [ 2.040000] [sw-ehci2]: open clock
  464. [sw-ehci2]: Set USB Power ON
  465. [ 2.070000] [sw-ehci2]: Set USB Power ON
  466. <6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  467. [ 2.080000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  468. <6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  469. [ 2.090000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  470. <6>sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  471. [ 2.100000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  472. ehci_irq: port change detect
  473. [ 2.170000] ehci_irq: port change detect
  474. The port change to OHCI now!
  475. [ 2.230000] The port change to OHCI now!
  476. <6>sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  477. [ 2.250000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  478. ehci_irq: port change detect
  479. [ 2.250000] ehci_irq: port change detect
  480. <6>hub 4-0:1.0: USB hub found
  481. [ 2.260000] hub 4-0:1.0: USB hub found
  482. <6>hub 4-0:1.0: 1 port detected
  483. [ 2.270000] hub 4-0:1.0: 1 port detected
  484. <6>[sw-ehci2]: disable ehci
  485. [ 2.280000] [sw-ehci2]: disable ehci
  486. <6>sw-ehci sw-ehci.2: remove, state 1
  487. [ 2.280000] sw-ehci sw-ehci.2: remove, state 1
  488. <6>usb usb4: USB disconnect, device number 1
  489. [ 2.290000] usb usb4: USB disconnect, device number 1
  490. <6>sw-ehci sw-ehci.2: USB bus 4 deregistered
  491. [ 2.300000] sw-ehci sw-ehci.2: USB bus 4 deregistered
  492. [sw-ehci2]: Set USB Power OFF
  493. [ 2.310000] [sw-ehci2]: Set USB Power OFF
  494. [sw-ehci2]: close clock
  495. [ 2.310000] [sw-ehci2]: close clock
  496. [sw-ohci2]: open clock
  497. [ 2.320000] [sw-ohci2]: open clock
  498. [sw-ohci2]: Set USB Power ON
  499. [ 2.350000] [sw-ohci2]: Set USB Power ON
  500. <6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  501. [ 2.350000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  502. <6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  503. [ 2.370000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  504. <6>sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  505. [ 2.380000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  506. <6>hub 4-0:1.0: USB hub found
  507. [ 2.450000] hub 4-0:1.0: USB hub found
  508. <6>hub 4-0:1.0: 1 port detected
  509. [ 2.460000] hub 4-0:1.0: 1 port detected
  510. <6>[sw-ohci2]: disable ohci
  511. [ 2.460000] [sw-ohci2]: disable ohci
  512. <6>sw-ohci sw-ohci.2: remove, state 1
  513. [ 2.470000] sw-ohci sw-ohci.2: remove, state 1
  514. <6>usb usb4: USB disconnect, device number 1
  515. [ 2.480000] usb usb4: USB disconnect, device number 1
  516. <6>sw-ohci sw-ohci.2: USB bus 4 deregistered
  517. [ 2.490000] sw-ohci sw-ohci.2: USB bus 4 deregistered
  518. [sw-ohci2]: Set USB Power OFF
  519. [ 2.500000] [sw-ohci2]: Set USB Power OFF
  520. [sw-ohci2]: close clock
  521. [ 2.500000] [sw-ohci2]: close clock
  522. <6>Initializing USB Mass Storage driver...
  523. [ 2.510000] Initializing USB Mass Storage driver...
  524. <6>usbcore: registered new interface driver usb-storage
  525. [ 2.520000] usbcore: registered new interface driver usb-storage
  526. <6>usb 3-1: new full speed USB device number 2 using sw-ohci
  527. [ 2.530000] usb 3-1: new full speed USB device number 2 using sw-ohci
  528. <6>USB Mass Storage support registered.
  529. [ 2.540000] USB Mass Storage support registered.
  530. <6>usbcore: registered new interface driver ums-alauda
  531. [ 2.550000] usbcore: registered new interface driver ums-alauda
  532. <6>usbcore: registered new interface driver ums-cypress
  533. [ 2.560000] usbcore: registered new interface driver ums-cypress
  534. <6>usbcore: registered new interface driver ums-datafab
  535. [ 2.570000] usbcore: registered new interface driver ums-datafab
  536. <6>usbcore: registered new interface driver ums_eneub6250
  537. [ 2.580000] usbcore: registered new interface driver ums_eneub6250
  538. <6>usbcore: registered new interface driver ums-freecom
  539. [ 2.590000] usbcore: registered new interface driver ums-freecom
  540. <6>usbcore: registered new interface driver ums-isd200
  541. [ 2.600000] usbcore: registered new interface driver ums-isd200
  542. <6>usbcore: registered new interface driver ums-jumpshot
  543. [ 2.610000] usbcore: registered new interface driver ums-jumpshot
  544. <6>usbcore: registered new interface driver ums-karma
  545. [ 2.630000] usbcore: registered new interface driver ums-karma
  546. <6>usbcore: registered new interface driver ums-onetouch
  547. [ 2.640000] usbcore: registered new interface driver ums-onetouch
  548. <6>usbcore: registered new interface driver ums-realtek
  549. [ 2.650000] usbcore: registered new interface driver ums-realtek
  550. <6>usbcore: registered new interface driver ums-sddr09
  551. [ 2.660000] usbcore: registered new interface driver ums-sddr09
  552. <6>usbcore: registered new interface driver ums-sddr55
  553. [ 2.670000] usbcore: registered new interface driver ums-sddr55
  554. <6>usbcore: registered new interface driver ums-usbat
  555. [ 2.680000] usbcore: registered new interface driver ums-usbat
  556. <6>mousedev: PS/2 mouse device common for all mice
  557. [ 2.690000] mousedev: PS/2 mouse device common for all mice
  558. sunxi RTC version 0.1
  559. [ 2.700000] sunxi RTC version 0.1
  560. <6>sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
  561. [ 2.710000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
  562. <6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  563. [ 2.720000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  564. <6>sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:6
  565. [ 2.730000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:6
  566. <6>using rtc device, rtc, for alarms[ 2.740000] using rtc device, rtc, for alarms<6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  567.  
  568. [ 2.750000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  569. <6>i2c /dev entries driver
  570. [ 2.760000] i2c /dev entries driver
  571. !!! base_Addr = 0xdc8d2c00
  572. [ 2.760000] !!! base_Addr = 0xdc8d2c00
  573. config i2c gpio with gpio_config api
  574. [ 2.770000] config i2c gpio with gpio_config api
  575. twi0, apb clock = 24000000
  576. [ 2.780000] twi0, apb clock = 24000000
  577. <6>axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  578. [ 2.790000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  579. <6>I2C: i2c-0: AW16XX I2C adapter
  580. [ 2.800000] I2C: i2c-0: AW16XX I2C adapter
  581. **********start************
  582. [ 2.800000] **********start************
  583. 0x40
  584. [ 2.810000] 0x40
  585. 0xf8
  586. [ 2.810000] 0xf8
  587. 0x28
  588. [ 2.820000] 0x28
  589. 0x0
  590. [ 2.820000] 0x0
  591. 0x0
  592. [ 2.820000] 0x0
  593. **********end************
  594. [ 2.820000] **********end************
  595. !!! base_Addr = 0xdc8d4000
  596. [ 2.830000] !!! base_Addr = 0xdc8d4000
  597. twi1, apb clock = 24000000
  598. [ 2.840000] twi1, apb clock = 24000000
  599. <6>I2C: i2c-1: AW16XX I2C adapter
  600. [ 2.840000] I2C: i2c-1: AW16XX I2C adapter
  601. **********start************
  602. [ 2.850000] **********start************
  603. 0x40
  604. [ 2.860000] 0x40
  605. 0xf8
  606. [ 2.860000] 0xf8
  607. 0x58
  608. [ 2.860000] 0x58
  609. 0x0
  610. [ 2.860000] 0x0
  611. 0x0
  612. [ 2.870000] 0x0
  613. **********end************
  614. [ 2.870000] **********end************
  615. !!! base_Addr = 0xdc8d6400
  616. [ 2.870000] !!! base_Addr = 0xdc8d6400
  617. twi2, apb clock = 24000000
  618. [ 2.880000] twi2, apb clock = 24000000
  619. <6>I2C: i2c-2: AW16XX I2C adapter
  620. [ 2.890000] I2C: i2c-2: AW16XX I2C adapter
  621. **********start************
  622. [ 2.890000] **********start************
  623. 0x40
  624. [ 2.900000] 0x40
  625. 0xf8
  626. [ 2.900000] 0xf8
  627. 0x58
  628. [ 2.910000] 0x58
  629. 0x0
  630. [ 2.910000] 0x0
  631. 0x0
  632. [ 2.910000] 0x0
  633. **********end************
  634. [ 2.910000] **********end************
  635. <6>lirc_dev: IR Remote Control driver registered, major 251
  636. [ 2.920000] lirc_dev: IR Remote Control driver registered, major 251
  637. <6>IR NEC protocol handler initialized
  638. [ 2.930000] IR NEC protocol handler initialized
  639. <6>IR RC5(x) protocol handler initialized
  640. [ 2.940000] IR RC5(x) protocol handler initialized
  641. <6>IR RC6 protocol handler initialized
  642. [ 2.950000] IR RC6 protocol handler initialized
  643. <6>IR JVC protocol handler initialized
  644. [ 2.960000] IR JVC protocol handler initialized
  645. <6>IR Sony protocol handler initialized
  646. [ 2.960000] IR Sony protocol handler initialized
  647. <6>IR RC5 (streamzap) protocol handler initialized
  648. [ 2.970000] IR RC5 (streamzap) protocol handler initialized
  649. <6>IR LIRC bridge handler initialized
  650. [ 2.980000] IR LIRC bridge handler initialized
  651. <6>Linux video capture interface: v2.00
  652. [ 2.990000] Linux video capture interface: v2.00
  653. [cedar dev]: install start!!!
  654. [ 3.000000] [cedar dev]: install start!!!
  655. [cedar dev]: install end!!!
  656. [ 3.010000] [cedar dev]: install end!!!
  657. [ace_drv] start!!!
  658. [ 3.010000] [ace_drv] start!!!
  659. [ace_drv] init end!!!
  660. [ 3.020000] [ace_drv] init end!!!
  661. [pa_drv] start!!!
  662. [ 3.020000] [pa_drv] start!!!
  663. [pa_drv] init end!!!
  664. [ 3.030000] [pa_drv] init end!!!
  665. <6>print_constraints: axp20_ldo1: 1300 mV
  666. [ 3.030000] print_constraints: axp20_ldo1: 1300 mV
  667. <6>print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  668. [ 3.040000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  669. <6>print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  670. [ 3.060000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  671. <6>print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  672. [ 3.070000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  673. <6>print_constraints: axp20_buck2: 700 <--> 2275 mV at 1450 mV
  674. [ 3.080000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1450 mV
  675. <6>print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  676. [ 3.100000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  677. <6>print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  678. [ 3.110000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  679. <6>input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  680. [ 3.120000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  681. <6>Bluetooth: HCI UART driver ver 2.2
  682. [ 3.150000] Bluetooth: HCI UART driver ver 2.2
  683. <6>Bluetooth: HCI H4 protocol initialized
  684. [ 3.160000] Bluetooth: HCI H4 protocol initialized
  685. <6>Bluetooth: HCI BCSP protocol initialized
  686. [ 3.170000] Bluetooth: HCI BCSP protocol initialized
  687. <6>Bluetooth: HCILL protocol initialized
  688. [ 3.180000] Bluetooth: HCILL protocol initialized
  689. <6>cpuidle: using governor ladder
  690. [ 3.190000] cpuidle: using governor ladder
  691. <6>cpuidle: using governor menu
  692. [ 3.200000] cpuidle: using governor menu
  693. [mmc_pm]: no sdio card used in configuration
  694. [ 3.200000] [mmc_pm]: no sdio card used in configuration
  695. [mmc]: sunximmc_init
  696. [ 3.210000] [mmc]: sunximmc_init
  697. [mmc]: sunxi mmc controller using config : 0xb
  698. [ 3.220000] [mmc]: sunxi mmc controller using config : 0xb
  699. [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  700. [ 3.230000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  701. [mmc]: mmc 0 power off !!
  702. [ 3.240000] [mmc]: mmc 0 power off !!
  703. [mmc]: mmc0 Probe: base:0xdc8de000 irq:32 dma:0 pdes:0xd9a70000, ret 0.
  704. [ 3.240000] [mmc]: mmc0 Probe: base:0xdc8de000 irq:32 dma:0 pdes:0xd9a70000, ret 0.
  705. [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
  706. [ 3.260000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
  707. [mmc]: mmc 1 power off !!
  708. [ 3.270000] [mmc]: mmc 1 power off !!
  709. [mmc]: mmc1 Probe: base:0xdc8e0000 irq:33 dma:0 pdes:0xd9a78000, ret 0.
  710. [ 3.280000] [mmc]: mmc1 Probe: base:0xdc8e0000 irq:33 dma:0 pdes:0xd9a78000, ret 0.
  711. [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  712. [ 3.290000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  713. [mmc]: mmc 3 power off !!
  714. [ 3.300000] [mmc]: mmc 3 power off !!
  715. [mmc]: mmc3 Probe: base:0xdc8e2000 irq:35 dma:0 pdes:0xd9a7c000, ret 0.
  716. [ 3.310000] [mmc]: mmc3 Probe: base:0xdc8e2000 irq:35 dma:0 pdes:0xd9a7c000, ret 0.
  717. <6>input: RAPOO RAPOO 5G Wireless Device as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.0/input/input1
  718. [ 3.330000] input: RAPOO RAPOO 5G Wireless Device as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.0/input/input1
  719. <6>generic-usb 0003:24AE:2001.0001: input: USB HID v1.01 Keyboard [RAPOO RAPOO 5G Wireless Device] on usb-sw-ohci-1/input0
  720. [ 3.350000] generic-usb 0003:24AE:2001.0001: input: USB HID v1.01 Keyboard [RAPOO RAPOO 5G Wireless Device] on usb-sw-ohci-1/input0
  721. <6>input: RAPOO RAPOO 5G Wireless Device as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.1/input/input2
  722. [ 3.380000] input: RAPOO RAPOO 5G Wireless Device as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.1/input/input2
  723. <6>generic-usb 0003:24AE:2001.0002: input: USB HID v1.01 Mouse [RAPOO RAPOO 5G Wireless Device] on usb-sw-ohci-1/input1
  724. [ 3.390000] generic-usb 0003:24AE:2001.0002: input: USB HID v1.01 Mouse [RAPOO RAPOO 5G Wireless Device] on usb-sw-ohci-1/input1
  725. <6>usbcore: registered new interface driver usbhid
  726. [ 3.420000] usbcore: registered new interface driver usbhid
  727. <6>usbhid: USB HID core driver
  728. [ 3.430000] usbhid: USB HID core driver
  729. enter sun4i Audio codec!!!
  730. [ 3.430000] enter sun4i Audio codec!!!
  731. <6>sun4i audio support initialized
  732. [ 3.440000] sun4i audio support initialized
  733. audiocodec_adap_awxx_init: script_parser_fetch err.
  734. [ 3.450000] audiocodec_adap_awxx_init: script_parser_fetch err.
  735. sun4i Audio codec successfully loaded..
  736. [ 3.460000] sun4i Audio codec successfully loaded..
  737. <6>asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  738. [ 3.470000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  739. <6>ALSA device list:
  740. [ 3.480000] ALSA device list:
  741. <6> #0: sun4i-CODEC Audio Codec
  742. [ 3.490000] #0: sun4i-CODEC Audio Codec
  743. <6> #1: sun4i-sndhdmi
  744. [ 3.490000] #1: sun4i-sndhdmi
  745. <6>IPv4 over IPv4 tunneling driver
  746. [ 3.500000] IPv4 over IPv4 tunneling driver
  747. <6>TCP cubic registered
  748. [ 3.510000] TCP cubic registered
  749. <6>Initializing XFRM netlink socket
  750. [ 3.510000] Initializing XFRM netlink socket
  751. <6>NET: Registered protocol family 10
  752. [ 3.520000] NET: Registered protocol family 10
  753. <6>NET: Registered protocol family 17
  754. [ 3.530000] NET: Registered protocol family 17
  755. <6>NET: Registered protocol family 15
  756. [ 3.540000] NET: Registered protocol family 15
  757. <6>Bluetooth: RFCOMM TTY layer initialized
  758. [ 3.540000] Bluetooth: RFCOMM TTY layer initialized
  759. <6>Bluetooth: RFCOMM socket layer initialized
  760. [ 3.550000] Bluetooth: RFCOMM socket layer initialized
  761. <6>Bluetooth: RFCOMM ver 1.11
  762. [ 3.560000] Bluetooth: RFCOMM ver 1.11
  763. <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  764. [ 3.570000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  765. <6>Bluetooth: BNEP filters: protocol multicast
  766. [ 3.580000] Bluetooth: BNEP filters: protocol multicast
  767. <6>802.1Q VLAN Support v1.8
  768. [ 3.590000] 802.1Q VLAN Support v1.8
  769. [mmc_pm]: No sdio card, please check your config !!
  770. [ 3.590000] [mmc_pm]: No sdio card, please check your config !!
  771. <5>Registering the dns_resolver key type
  772. [ 3.600000] Registering the dns_resolver key type
  773. <6>VFP support v0.3: [ 3.610000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  774. implementor 41 architecture 3 part 30 variant c rev 3
  775. <5>Registering SWP/SWPB emulation handler
  776. [ 3.630000] Registering SWP/SWPB emulation handler
  777. <6>registered taskstats version 1
  778. [ 3.640000] registered taskstats version 1
  779. <4>regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  780. [ 3.640000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  781. <4>regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  782. [ 3.660000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  783. <4>regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  784. [ 3.670000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  785. <4>regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  786. [ 3.690000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  787. <4>regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  788. [ 3.700000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  789. <4>regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
  790. [ 3.720000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
  791. <6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  792. [ 3.730000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  793. <6>sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:7
  794. [ 3.740000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:7
  795. <6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:07 UTC (1262304007)
  796. [ 3.750000] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:07 UTC (1262304007)
  797. <6>Waiting for root device /dev/mmcblk0p2...
  798. [ 3.770000] Waiting for root device /dev/mmcblk0p2...
  799. [mmc]: mmc 0 detect change, present 1
  800. [ 4.240000] [mmc]: mmc 0 detect change, present 1
  801. [mmc]: mmc 0 power on !!
  802. [ 4.540000] [mmc]: mmc 0 power on !!
  803. [mmc]: sdxc_request_done(L1113): [ 4.580000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  804. smc 0 err, cmd 52, RTO !!
  805. [mmc]: sdxc_request_done(L1113): [ 4.590000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  806. smc 0 err, cmd 52, RTO !!
  807. [mmc]: sdxc_request_done(L1113): [ 4.600000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  808. smc 0 err, cmd 5, RTO !!
  809. [mmc]: sdxc_request_done(L1113): [ 4.620000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  810. smc 0 err, cmd 5, RTO !!
  811. [mmc]: sdxc_request_done(L1113): [ 4.630000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  812. smc 0 err, cmd 5, RTO !!
  813. [mmc]: sdxc_request_done(L1113): [ 4.640000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  814. smc 0 err, cmd 5, RTO !!
  815. <6>mmc0: new high speed SD card at address 1234
  816. [ 4.690000] mmc0: new high speed SD card at address 1234
  817. <6>mmcblk0: mmc0:1234 SA01G 942 MiB
  818. [ 4.700000] mmcblk0: mmc0:1234 SA01G 942 MiB
  819. <6> mmcblk0: p1 p2
  820. [ 4.710000] mmcblk0: p1 p2
  821. <6>EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  822. [ 4.790000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  823. <6>VFS: Mounted root (ext4 filesystem) on device 179:2.
  824. [ 4.800000] VFS: Mounted root (ext4 filesystem) on device 179:2.
  825. <6>devtmpfs: mounted
  826. [ 4.820000] devtmpfs: mounted
  827. <6>Freeing init memory: 168K
  828. [ 4.820000] Freeing init memory: 168K
  829. <4>Failed to execute /init. Attempting defaults...
  830. [ 4.830000] Failed to execute /init. Attempting defaults...
  831. INIT: version 2.88 booting
  832. [info] Using makefile-style concurrent boot in runlevel S.
  833. [....] Starting the hotplug events dispatcher: udevd<30>udevd[148]: starting version 175
  834. [ 5.700000] udevd[148]: starting version 175
  835. . ok
  836. [....] Synthesizing the initial hotplug events...done.
  837. [....] Waiting for /dev to be fully populated...done.
  838. hostname: the specified hostname is invalid
  839. [....] Activating swap...done.
  840. <6>EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  841. [ 9.410000] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  842. [....] Cleaning up temporary files... /tmp. ok
  843. [info] Loading kernel module sw_ahci_platform.
  844. SATA AHCI Phy Power Failed!!
  845. [ 9.920000] SATA AHCI Phy Power Failed!!
  846. SATA AHCI Phy Calibration Failed!!
  847. [ 10.040000] SATA AHCI Phy Calibration Failed!!
  848. err: gpio count < =0 ,gpio_count is: 0
  849. [ 10.050000] err: gpio count < =0 ,gpio_count is: 0
  850. <6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  851. [ 10.060000] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  852. <4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  853. [ 10.070000] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  854. <6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  855. [ 10.080000] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  856. <6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  857. [ 10.100000] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  858. <6>scsi0 : sw_ahci_platform
  859. [ 10.120000] scsi0 : sw_ahci_platform
  860. <6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
  861. [ 10.120000] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
  862. <6>ata1: SATA link down (SStatus 0 SControl 300)
  863. [ 10.490000] ata1: SATA link down (SStatus 0 SControl 300)
  864. [info] Loading kernel module lcd.
  865. <6>sunxi disp driver loaded (/dev/disp api 1.0)
  866. [ 10.780000] sunxi disp driver loaded (/dev/disp api 1.0)
  867. [info] Loading kernel module hdmi.
  868. <6>disp clks: lcd 74250000 lcd_div 1 hdmi 74250000 pll 297000000 2x 0
  869. [ 11.010000] disp clks: lcd 74250000 lcd_div 1 hdmi 74250000 pll 297000000 2x 0
  870. <6>Console: switching to colour frame buffer device 160x45
  871. [ 12.140000] Console: switching to colour frame buffer device 160x45
  872. [info] Loading kernel module ump.
  873. UMP<2>: [ 12.290000] UMP<2>: Inserting UMP device driver. Compiled: Jan 11 2013, time: 23:21:50
  874. Inserting UMP device driver. Compiled: Jan 11 2013, time: 23:21:50
  875. UMP<2>: [ 12.310000] UMP<2>: Using OS memory backend, allocation limit: 134217728
  876. Using OS memory backend, allocation limit: 134217728
  877. UMP: [ 12.320000] UMP: UMP device driver loaded
  878. UMP device driver loaded
  879. [info] Loading kernel module disp.
  880. [info] Loading kernel module mali.
  881. <6>mali: use config clk_div 4
  882. [ 12.550000] mali: use config clk_div 4
  883. <6>mali: clk_div 4
  884. [ 12.570000] mali: clk_div 4
  885. Mali: [ 12.570000] Mali: mali clock set completed, clock is 240000000 Mhz
  886. mali clock set completed, clock is 240000000 Mhz
  887. <6>mali: use config clk_div 4
  888. [ 12.590000] mali: use config clk_div 4
  889. <6>mali: clk_div 4
  890. [ 12.600000] mali: clk_div 4
  891. Mali: [ 12.600000] Mali: mali clock set completed, clock is 240000000 Mhz
  892. mali clock set completed, clock is 240000000 Mhz
  893. Mali: [ 12.620000] Mali: Mali device driver loaded
  894. Mali device driver loaded
  895. [info] Loading kernel module mali_drm.
  896. <6>[drm] Initialized drm 1.1.0 20060810
  897. [ 13.030000] [drm] Initialized drm 1.1.0 20060810
  898. <6>Mali DRM initialize, driver name: mali_drm, version 2.1
  899. [ 13.060000] Mali DRM initialize, driver name: mali_drm, version 2.1
  900. <6>[drm] Initialized mali_drm 2.1.1 20101111 on minor 0
  901. [ 13.090000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
  902. <6>Mali DRM initialize, driver name: mali_drm, version 2.1
  903. [ 13.110000] Mali DRM initialize, driver name: mali_drm, version 2.1
  904. <6>[drm] Initialized mali_drm 2.1.1 20101111 on minor 1
  905. [ 13.140000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
  906. [info] Loading kernel module 8192cu.
  907. <6>[sw-ehci2]: enable ehci
  908. [ 13.870000] [sw-ehci2]: enable ehci
  909. [sw-ehci2]: open clock
  910. [ 13.880000] [sw-ehci2]: open clock
  911. [sw-ehci2]: Set USB Power ON
  912. [ 13.910000] [sw-ehci2]: Set USB Power ON
  913. <6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  914. [ 13.910000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  915. <6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  916. [ 13.930000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  917. <6>sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  918. [ 13.940000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  919. <6>sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  920. [ 13.970000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  921. ehci_irq: port change detect
  922. [ 13.970000] ehci_irq: port change detect
  923. <6>hub 4-0:1.0: USB hub found
  924. [ 13.990000] hub 4-0:1.0: USB hub found
  925. <6>hub 4-0:1.0: 1 port detected
  926. [ 13.990000] hub 4-0:1.0: 1 port detected
  927. <6>[sw-ohci2]: enable ohci
  928. [ 14.020000] [sw-ohci2]: enable ohci
  929. [sw-ohci2]: open clock
  930. [ 14.020000] [sw-ohci2]: open clock
  931. <6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  932. [ 14.100000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  933. <6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  934. [ 14.110000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  935. <6>sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  936. [ 14.130000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  937. <6>hub 5-0:1.0: USB hub found
  938. [ 14.210000] hub 5-0:1.0: USB hub found
  939. <6>hub 5-0:1.0: 1 port detected
  940. [ 14.210000] hub 5-0:1.0: 1 port detected
  941. <6>usbcore: registered new interface driver rtl8192cu
  942. [ 14.230000] usbcore: registered new interface driver rtl8192cu
  943. <6>usb 4-1: new high speed USB device number 2 using sw-ehci
  944. [ 14.320000] usb 4-1: new high speed USB device number 2 using sw-ehci
  945. <30>udevd[178]: renamed network interface wlan0 to wlan1
  946. [ 14.850000] udevd[178]: renamed network interface wlan0 to wlan1
  947. [....] Activating lvm and md swap...done.
  948. [....] Checking file systems...fsck from util-linux 2.20.1
  949. done.
  950. [....] Mounting local filesystems...done.
  951. [....] Activating swapfile swap...done.
  952. [....] Cleaning up temporary files.... ok
  953. [....] Setting kernel variables ...done.
  954. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
  955. Copyright 2004-2011 Internet Systems Consortium.
  956. All rights reserved.
  957. For info, please visit https://www.isc.org/software/dhcp/
  958.  
  959. <4>wemac wemac.0: WARNING: no IRQ resource flags set.
  960. [ 19.940000] wemac wemac.0: WARNING: no IRQ resource flags set.
  961. <6>wemac wemac.0: eth0: link down
  962. [ 20.050000] wemac wemac.0: eth0: link down
  963. <6>ADDRCONF(NETDEV_UP): eth0: link is not ready
  964. [ 20.050000] ADDRCONF(NETDEV_UP): eth0: link is not ready
  965. Listening on LPF/eth0/d2:88:be:dc:84:be
  966. Sending on LPF/eth0/d2:88:be:dc:84:be
  967. Sending on Socket/fallback
  968. DHCPREQUEST on eth0 to 255.255.255.255 port 67
  969. <6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  970. [ 22.090000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  971. <6>wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  972. [ 22.130000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  973. DHCPREQUEST on eth0 to 255.255.255.255 port 67
  974. DHCPACK from 192.168.1.1
  975. bound to 192.168.1.120 -- renewal in 41455 seconds.
  976. <6>ADDRCONF(NETDEV_UP): wlan1: link is not ready
  977. [ 30.400000] ADDRCONF(NETDEV_UP): wlan1: link is not ready
  978. <6>ADDRCONF(NETDEV_UP): wlan1: link is not ready
  979. [ 30.460000] ADDRCONF(NETDEV_UP): wlan1: link is not ready
  980. ioctl[SIOCSIWAP]: Operation not permitted
  981. ioctl[SIOCSIWENCODEEXT]: Invalid argument
  982. ioctl[SIOCSIWENCODEEXT]: Invalid argument
  983. <7>eth0: no IPv6 routers present
  984. [ 32.510000] eth0: no IPv6 routers present
  985. Internet Systems Consortium DHCP Client 4.2.2
  986. Copyright 2004-2011 Internet Systems Consortium.
  987. All rights reserved.
  988. For info, please visit https://www.isc.org/software/dhcp/
  989.  
  990. Listening on LPF/wlan1/48:02:2a:9b:d7:74
  991. Sending on LPF/wlan1/48:02:2a:9b:d7:74
  992. Sending on Socket/fallback
  993. DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 3
  994. DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 6
  995. DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 8
  996. DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 11
  997. DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 18
  998. DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 11
  999. DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 4
  1000. No DHCPOFFERS received.
  1001. Unable to obtain a lease on first try. Exiting.
  1002. Failed to bring up wlan1.
  1003. done.
  1004. [....] Cleaning up temporary files.... ok
  1005. [....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. ok
  1006. [....] startpar: service(s) returned failure: hostname.sh ... failed!
  1007. INIT: Entering runlevel: 2
  1008. [info] Using makefile-style concurrent boot in runlevel 2.
  1009. [....] Starting enhanced syslogd: rsyslogd. ok
  1010. [....] Starting periodic command scheduler: cron. ok
  1011. [....] Starting system message bus: dbus. ok
  1012. [....] Loading cpufreq kernel modules...done (none).
  1013. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...done.
  1014. [....] Starting OpenBSD Secure Shell server: sshd. ok
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!