You now need to run 'sudo make setuid' in order to run in place with access to hardware.
skunkworks@skunkworks-Studio-XPS-1645:~/linuxcnc-dev/src$ cd ..
skunkworks@skunkworks-Studio-XPS-1645:~/linuxcnc-dev$ . ./scripts/rip-environment
skunkworks@skunkworks-Studio-XPS-1645:~/linuxcnc-dev$ linuxcnc
LINUXCNC - 2.8.0~pre1
Machine configuration directory is '/home/skunkworks/linuxcnc-dev/configs/sim/axis/panelui-demo'
Machine configuration file is 'panelui-demo.ini'
Starting LinuxCNC...
Found file(REL): ./panelui-demo.hal
Note: Using POSIX non-realtime
panelui: adding import dir /home/skunkworks/linuxcnc-dev/configs/sim/axis/panelui-demo
panelui: module 'panelui_handler' imported OK
panelui: module 'panelui_handler' : 'get_handlers' function found
panelui: Register callback 'cycle_mode' in panelui_handler
panelui: Register callback 'hello_world' in panelui_handler
Keycode: select_axis <-> Widget: axis_select
Keycode: NONE <-> Widget: mpg_scale
Keycode: R1C6 <-> Widget: optional_stop
Keycode: R1C7 <-> Widget: machine_on
Keycode: R1C4 <-> Widget: mist
Keycode: R1C5 <-> Widget: home_z
Keycode: R1C2 <-> Widget: jog_z-
Keycode: R1C3 <-> Widget: spindle_stop
Keycode: R0C7 <-> Widget: pause
Keycode: R0C6 <-> Widget: single_block
Keycode: R0C5 <-> Widget: home_x
Keycode: R0C4 <-> Widget: flood
Keycode: R0C3 <-> Widget: mpg_large
Keycode: R0C2 <-> Widget: jog_x+
Keycode: R3C2 <-> Widget: jog_z+
Keycode: R3C3 <-> Widget: spindle_fwd
Keycode: R3C5 <-> Widget: message
Keycode: R3C6 <-> Widget: feed_hold
Keycode: R2C3 <-> Widget: spindle_rev
Keycode: R2C2 <-> Widget: jog_x-
Keycode: R2C5 <-> Widget: tool_change
Keycode: R2C7 <-> Widget: CYCLE_START
Keycode: R5C2 <-> Widget: select_x
Keycode: R5C3 <-> Widget: spindle_jog_fwd
Keycode: R5C7 <-> Widget: estop
Keycode: R5C4 <-> Widget: block_delete
Keycode: R5C5 <-> Widget: mdi_go_home
Keycode: R7C6 <-> Widget: override_limits
Keycode: R7C2 <-> Widget: mpg_med
Keycode: R4C2 <-> Widget: select_z
Keycode: R6C2 <-> Widget: mpg_small
Found file(REL): ./custom.hal
row: 0 column: 49 code: 49
row: 0 column: 50 code: 50
row: 0 column: 52 code: 52
row: 0 column: 53 code: 53
PYUI ERROR: no button or command assigned to keycode R6C1?
'R6C1'
R6C2 mpg_small Released
PYUI ERROR: no button or command assigned to keycode R6C4?
'R6C4'
PYUI ERROR: no button or command assigned to keycode R6C5?
'R6C5'
row: 0 column: 54 code: 54
row: 0 column: 55 code: 55
row: 0 column: 56 code: 56
row: 0 column: 57 code: 57
row: 0 column: 58 code: 58
row: 0 column: 59 code: 59
row: 0 column: 60 code: 60
row: 0 column: 61 code: 61
row: 0 column: 62 code: 62
row: 0 column: 63 code: 63
PYUI ERROR: no button or command assigned to keycode R6C6?
'R6C6'
row: 0 column: 64 code: 64
PYUI ERROR: no button or command assigned to keycode R6C7?
'R6C7'
PYUI ERROR: no button or command assigned to keycode R7C0?
'R7C0'
PYUI ERROR: no button or command assigned to keycode R7C1?
'R7C1'
R7C2 mpg_med Released
PYUI ERROR: no button or command assigned to keycode R7C3?
'R7C3'
PYUI ERROR: no button or command assigned to keycode R7C4?
'R7C4'
PYUI ERROR: no button or command assigned to keycode R7C5?
'R7C5'
R7C6 override_limits Released
PYUI ERROR: no button or command assigned to keycode R7C7?
'R7C7'
PYUI ERROR: no button or command assigned to keycode R0C0?
'R0C0'
row: 0 column: 65 code: 65
row: 0 column: 66 code: 66
row: 0 column: 67 code: 67
row: 0 column: 68 code: 68
row: 0 column: 69 code: 69
row: 0 column: 70 code: 70
row: 0 column: 71 code: 71
row: 0 column: 72 code: 72
row: 0 column: 73 code: 73
row: 0 column: 74 code: 74
PYUI ERROR: no button or command assigned to keycode R0C1?
'R0C1'
row: 0 column: 75 code: 75
row: 0 column: 76 code: 76
row: 0 column: 77 code: 77
row: 0 column: 78 code: 78
row: 0 column: 79 code: 79
row: 0 column: 80 code: 80
row: 0 column: 81 code: 81
row: 0 column: 82 code: 82
row: 0 column: 83 code: 83
row: 0 column: 84 code: 84
row: 0 column: 85 code: 85
row: 0 column: 86 code: 86
row: 0 column: 87 code: 87
row: 0 column: 88 code: 88
row: 0 column: 89 code: 89
row: 0 column: 90 code: 90
row: 0 column: 91 code: 91
row: 0 column: 92 code: 92
row: 0 column: 93 code: 93
row: 0 column: 94 code: 94
row: 0 column: 95 code: 95
row: 0 column: 96 code: 96
row: 0 column: 97 code: 97
row: 0 column: 98 code: 98
row: 0 column: 99 code: 99
row: 0 column: 100 code: 100
row: 0 column: 101 code: 101
row: 0 column: 102 code: 102
row: 0 column: 103 code: 103
row: 0 column: 104 code: 104
row: 0 column: 105 code: 105
row: 0 column: 106 code: 106
row: 0 column: 107 code: 107
row: 0 column: 108 code: 108
row: 0 column: 109 code: 109
row: 0 column: 110 code: 110
row: 0 column: 111 code: 111
row: 0 column: 112 code: 112
row: 0 column: 113 code: 113
row: 0 column: 114 code: 114
row: 0 column: 115 code: 115
row: 0 column: 116 code: 116
row: 0 column: 117 code: 117
row: 0 column: 118 code: 118
row: 0 column: 119 code: 119
row: 0 column: 120 code: 120
row: 0 column: 121 code: 121
row: 0 column: 122 code: 122
row: 0 column: 123 code: 123
row: 0 column: 124 code: 124
row: 0 column: 125 code: 125
row: 0 column: 126 code: 126
row: 0 column: 127 code: 127
row: 0 column: 128 code: 128
row: 0 column: 129 code: 129
row: 0 column: 131 code: 131
row: 0 column: 132 code: 132
row: 0 column: 133 code: 133
row: 0 column: 134 code: 134
row: 0 column: 135 code: 135
row: 0 column: 136 code: 136
PYUI ERROR: no button or command assigned to keycode R0C0?
'R0C0'
PYUI ERROR: no button or command assigned to keycode R0C1?
'R0C1'
R0C3 mpg_large Released
R0C4 flood Released
R0C5 home_x Released
row: 0 column: 137 code: 137
row: 0 column: 138 code: 138
row: 0 column: 139 code: 139
row: 0 column: 140 code: 140
row: 0 column: 141 code: 141
row: 0 column: 142 code: 142
row: 0 column: 143 code: 143
row: 0 column: 144 code: 144
row: 0 column: 145 code: 145
row: 0 column: 146 code: 146
row: 0 column: 147 code: 147
row: 0 column: 148 code: 148
row: 0 column: 149 code: 149
row: 0 column: 150 code: 150
row: 0 column: 151 code: 151
row: 0 column: 152 code: 152
row: 0 column: 153 code: 153
row: 0 column: 154 code: 154
row: 0 column: 155 code: 155
row: 0 column: 156 code: 156
row: 0 column: 157 code: 157
row: 0 column: 158 code: 158
row: 0 column: 160 code: 160
row: 0 column: 162 code: 162
row: 0 column: 163 code: 163
row: 0 column: 164 code: 164
row: 0 column: 165 code: 165
row: 0 column: 166 code: 166
row: 0 column: 167 code: 167
row: 0 column: 168 code: 168
row: 0 column: 169 code: 169
row: 0 column: 170 code: 170
row: 0 column: 171 code: 171
row: 0 column: 172 code: 172
row: 0 column: 173 code: 173
row: 0 column: 174 code: 174
row: 0 column: 175 code: 175
row: 0 column: 176 code: 176
row: 0 column: 177 code: 177
row: 0 column: 178 code: 178
row: 0 column: 179 code: 179
row: 0 column: 180 code: 180
row: 0 column: 181 code: 181
row: 0 column: 182 code: 182
row: 0 column: 183 code: 183
row: 0 column: 184 code: 184
row: 0 column: 185 code: 185
row: 0 column: 186 code: 186
row: 0 column: 187 code: 187
row: 0 column: 188 code: 188
row: 0 column: 189 code: 189
row: 0 column: 190 code: 190
row: 0 column: 191 code: 191
row: 0 column: 192 code: 192
row: 0 column: 193 code: 193
row: 0 column: 194 code: 194
row: 0 column: 196 code: 196
row: 0 column: 197 code: 197
row: 0 column: 198 code: 198
row: 0 column: 200 code: 200
row: 0 column: 201 code: 201
row: 0 column: 202 code: 202
row: 0 column: 203 code: 203
row: 0 column: 204 code: 204
row: 0 column: 205 code: 205
row: 0 column: 206 code: 206
row: 0 column: 207 code: 207
row: 0 column: 208 code: 208
row: 0 column: 209 code: 209
row: 0 column: 210 code: 210
row: 0 column: 211 code: 211
row: 0 column: 212 code: 212
row: 0 column: 213 code: 213
row: 0 column: 214 code: 214
row: 0 column: 215 code: 215
row: 0 column: 216 code: 216
row: 0 column: 217 code: 217
command (EMC_AXIS_HOME) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 218 code: 218
row: 0 column: 219 code: 219
row: 0 column: 220 code: 220
row: 0 column: 221 code: 221
row: 0 column: 222 code: 222
row: 0 column: 223 code: 223
row: 0 column: 224 code: 224
row: 0 column: 225 code: 225
row: 0 column: 226 code: 226
row: 0 column: 227 code: 227
row: 0 column: 228 code: 228
row: 0 column: 229 code: 229
row: 0 column: 230 code: 230
row: 0 column: 231 code: 231
R0C6 single_block Released
R0C7 pause Released
PYUI ERROR: no button or command assigned to keycode R1C0?
'R1C0'
PYUI ERROR: no button or command assigned to keycode R1C1?
'R1C1'
R1C2 jog_z- Released
row: 0 column: 232 code: 232
row: 0 column: 233 code: 233
row: 0 column: 234 code: 234
row: 0 column: 237 code: 237
row: 0 column: 238 code: 238
row: 0 column: 239 code: 239
command (EMC_AXIS_JOG) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 240 code: 240
row: 0 column: 241 code: 241
row: 0 column: 242 code: 242
row: 0 column: 243 code: 243
row: 0 column: 244 code: 244
row: 0 column: 245 code: 245
row: 0 column: 247 code: 247
row: 0 column: 248 code: 248
row: 0 column: 249 code: 249
row: 0 column: 250 code: 250
row: 0 column: 251 code: 251
row: 0 column: 253 code: 253
row: 0 column: 254 code: 254
row: 0 column: 255 code: 255
row: 0 column: 256 code: 256
R1C3 spindle_stop Released
row: 0 column: 257 code: 257
row: 0 column: 258 code: 258
row: 0 column: 259 code: 259
row: 0 column: 261 code: 261
row: 0 column: 262 code: 262
row: 0 column: 263 code: 263
row: 0 column: 265 code: 265
row: 0 column: 266 code: 266
row: 0 column: 267 code: 267
row: 0 column: 268 code: 268
row: 0 column: 269 code: 269
row: 0 column: 270 code: 270
row: 0 column: 271 code: 271
row: 0 column: 273 code: 273
row: 0 column: 274 code: 274
row: 0 column: 275 code: 275
row: 0 column: 276 code: 276
row: 0 column: 277 code: 277
row: 0 column: 279 code: 279
row: 0 column: 280 code: 280
row: 0 column: 281 code: 281
row: 0 column: 282 code: 282
row: 0 column: 283 code: 283
row: 0 column: 284 code: 284
row: 0 column: 285 code: 285
command (EMC_SPINDLE_OFF) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 287 code: 287
row: 0 column: 288 code: 288
row: 0 column: 289 code: 289
row: 0 column: 290 code: 290
row: 0 column: 292 code: 292
row: 0 column: 293 code: 293
row: 0 column: 294 code: 294
row: 0 column: 295 code: 295
row: 0 column: 296 code: 296
row: 0 column: 297 code: 297
row: 0 column: 298 code: 298
row: 0 column: 300 code: 300
row: 0 column: 301 code: 301
row: 0 column: 302 code: 302
row: 0 column: 303 code: 303
row: 0 column: 304 code: 304
R1C4 mist Released
R1C5 home_z Released
row: 0 column: 306 code: 306
row: 0 column: 307 code: 307
row: 0 column: 308 code: 308
row: 0 column: 309 code: 309
row: 0 column: 310 code: 310
row: 0 column: 311 code: 311
row: 0 column: 312 code: 312
row: 0 column: 314 code: 314
row: 0 column: 315 code: 315
row: 0 column: 316 code: 316
row: 0 column: 317 code: 317
row: 0 column: 319 code: 319
row: 0 column: 320 code: 320
row: 0 column: 321 code: 321
row: 0 column: 322 code: 322
row: 0 column: 323 code: 323
row: 0 column: 324 code: 324
row: 0 column: 325 code: 325
row: 0 column: 327 code: 327
row: 0 column: 328 code: 328
row: 0 column: 329 code: 329
row: 0 column: 330 code: 330
row: 0 column: 331 code: 331
row: 0 column: 333 code: 333
command (EMC_AXIS_HOME) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 334 code: 334
row: 0 column: 335 code: 335
row: 0 column: 336 code: 336
row: 0 column: 337 code: 337
row: 0 column: 338 code: 338
row: 0 column: 339 code: 339
row: 0 column: 341 code: 341
row: 0 column: 342 code: 342
row: 0 column: 343 code: 343
row: 0 column: 344 code: 344
row: 0 column: 346 code: 346
row: 0 column: 347 code: 347
row: 0 column: 348 code: 348
row: 0 column: 349 code: 349
row: 0 column: 350 code: 350
row: 0 column: 351 code: 351
R1C6 optional_stop Released
R1C7 machine_on Released
PYUI ERROR: no button or command assigned to keycode R2C0?
'R2C0'
PYUI ERROR: no button or command assigned to keycode R2C1?
'R2C1'
row: 0 column: 352 code: 352
R2C2 jog_x- Released
row: 0 column: 354 code: 354
row: 0 column: 355 code: 355
row: 0 column: 356 code: 356
command (EMC_AXIS_JOG) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 357 code: 357
row: 0 column: 358 code: 358
row: 0 column: 360 code: 360
row: 0 column: 361 code: 361
row: 0 column: 362 code: 362
row: 0 column: 363 code: 363
row: 0 column: 364 code: 364
row: 0 column: 365 code: 365
row: 0 column: 366 code: 366
row: 0 column: 368 code: 368
row: 0 column: 369 code: 369
row: 0 column: 370 code: 370
row: 0 column: 371 code: 371
row: 0 column: 373 code: 373
row: 0 column: 374 code: 374
row: 0 column: 375 code: 375
row: 0 column: 376 code: 376
R2C3 spindle_rev Released
row: 0 column: 377 code: 377
row: 0 column: 378 code: 378
row: 0 column: 379 code: 379
row: 0 column: 380 code: 380
command (EMC_SPINDLE_ON) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 381 code: 381
row: 0 column: 382 code: 382
row: 0 column: 383 code: 383
row: 0 column: 384 code: 384
row: 0 column: 385 code: 385
row: 0 column: 386 code: 386
row: 0 column: 387 code: 387
row: 0 column: 388 code: 388
row: 0 column: 389 code: 389
row: 0 column: 390 code: 390
row: 0 column: 392 code: 392
row: 0 column: 393 code: 393
row: 0 column: 394 code: 394
row: 0 column: 395 code: 395
row: 0 column: 396 code: 396
row: 0 column: 397 code: 397
row: 0 column: 399 code: 399
PYUI ERROR: no button or command assigned to keycode R2C4?
'R2C4'
R2C5 tool_change Released
PYUI ERROR: no button or command assigned to keycode R2C6?
'R2C6'
R2C7 CYCLE_START Released
row: 0 column: 400 code: 400
row: 0 column: 401 code: 401
row: 0 column: 402 code: 402
row: 0 column: 403 code: 403
row: 0 column: 405 code: 405
row: 0 column: 407 code: 407
row: 0 column: 408 code: 408
row: 0 column: 409 code: 409
row: 0 column: 410 code: 410
row: 0 column: 411 code: 411
row: 0 column: 412 code: 412
row: 0 column: 413 code: 413
row: 0 column: 414 code: 414
row: 0 column: 415 code: 415
row: 0 column: 416 code: 416
row: 0 column: 417 code: 417
row: 0 column: 418 code: 418
row: 0 column: 419 code: 419
row: 0 column: 420 code: 420
row: 0 column: 421 code: 421
row: 0 column: 423 code: 423
row: 0 column: 424 code: 424
row: 0 column: 425 code: 425
row: 0 column: 426 code: 426
row: 0 column: 427 code: 427
row: 0 column: 428 code: 428
row: 0 column: 429 code: 429
row: 0 column: 431 code: 431
row: 0 column: 432 code: 432
row: 0 column: 433 code: 433
row: 0 column: 435 code: 435
row: 0 column: 436 code: 436
row: 0 column: 437 code: 437
row: 0 column: 438 code: 438
row: 0 column: 439 code: 439
row: 0 column: 440 code: 440
row: 0 column: 441 code: 441
row: 0 column: 442 code: 442
row: 0 column: 444 code: 444
row: 0 column: 446 code: 446
0
row: 0 column: 447 code: 447
row: 0 column: 448 code: 448
row: 0 column: 449 code: 449
command (EMC_TASK_PLAN_RUN) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 450 code: 450
row: 0 column: 452 code: 452
row: 0 column: 453 code: 453
row: 0 column: 454 code: 454
row: 0 column: 455 code: 455
row: 0 column: 456 code: 456
row: 0 column: 457 code: 457
row: 0 column: 458 code: 458
row: 0 column: 460 code: 460
row: 0 column: 461 code: 461
row: 0 column: 462 code: 462
row: 0 column: 463 code: 463
row: 0 column: 464 code: 464
row: 0 column: 465 code: 465
row: 0 column: 466 code: 466
row: 0 column: 467 code: 467
row: 0 column: 468 code: 468
row: 0 column: 470 code: 470
PYUI ERROR: no button or command assigned to keycode R3C0?
'R3C0'
PYUI ERROR: no button or command assigned to keycode R3C1?
'R3C1'
R3C2 jog_z+ Released
row: 0 column: 471 code: 471
row: 0 column: 472 code: 472
command (EMC_AXIS_JOG) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 473 code: 473
row: 0 column: 475 code: 475
row: 0 column: 476 code: 476
row: 0 column: 477 code: 477
row: 0 column: 478 code: 478
row: 0 column: 479 code: 479
row: 0 column: 480 code: 480
row: 0 column: 481 code: 481
row: 0 column: 482 code: 482
row: 0 column: 484 code: 484
row: 0 column: 485 code: 485
row: 0 column: 486 code: 486
row: 0 column: 487 code: 487
row: 0 column: 488 code: 488
row: 0 column: 490 code: 490
row: 0 column: 491 code: 491
row: 0 column: 493 code: 493
row: 0 column: 494 code: 494
R3C3 spindle_fwd Released
row: 0 column: 495 code: 495
row: 0 column: 496 code: 496
row: 0 column: 498 code: 498
command (EMC_SPINDLE_ON) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 500 code: 500
row: 0 column: 501 code: 501
row: 0 column: 502 code: 502
row: 0 column: 504 code: 504
row: 0 column: 505 code: 505
row: 0 column: 506 code: 506
row: 0 column: 507 code: 507
row: 0 column: 508 code: 508
row: 0 column: 509 code: 509
row: 0 column: 510 code: 510
row: 0 column: 511 code: 511
row: 0 column: 512 code: 512
row: 0 column: 513 code: 513
row: 0 column: 514 code: 514
row: 0 column: 515 code: 515
row: 0 column: 516 code: 516
row: 0 column: 517 code: 517
row: 0 column: 518 code: 518
PYUI ERROR: no button or command assigned to keycode R3C4?
'R3C4'
R3C5 message Released

Hello world

R3C6 feed_hold Released
PYUI ERROR: no button or command assigned to keycode R4C0?
'R4C0'
R4C2 select_z Released
PYUI ERROR: no button or command assigned to keycode R4C3?
'R4C3'
PYUI ERROR: no button or command assigned to keycode R4C4?
'R4C4'
PYUI ERROR: no button or command assigned to keycode R4C5?
'R4C5'
PYUI ERROR: no button or command assigned to keycode R4C6?
'R4C6'
PYUI ERROR: no button or command assigned to keycode R4C7?
'R4C7'
PYUI ERROR: no button or command assigned to keycode R5C0?
'R5C0'
row: 0 column: 519 code: 519
PYUI ERROR: no button or command assigned to keycode R5C1?
'R5C1'
R5C2 select_x Released
R5C3 spindle_jog_fwd Released
row: 0 column: 520 code: 520
row: 0 column: 521 code: 521
row: 0 column: 522 code: 522
row: 0 column: 523 code: 523
row: 0 column: 524 code: 524
row: 0 column: 525 code: 525
row: 0 column: 526 code: 526
row: 0 column: 528 code: 528
row: 0 column: 529 code: 529
row: 0 column: 530 code: 530
row: 0 column: 531 code: 531
row: 0 column: 533 code: 533
row: 0 column: 534 code: 534
row: 0 column: 535 code: 535
row: 0 column: 536 code: 536
row: 0 column: 537 code: 537
row: 0 column: 538 code: 538
row: 0 column: 539 code: 539
row: 0 column: 540 code: 540
row: 0 column: 541 code: 541
row: 0 column: 542 code: 542
row: 0 column: 543 code: 543
row: 0 column: 544 code: 544
row: 0 column: 545 code: 545
row: 0 column: 546 code: 546
row: 0 column: 547 code: 547
row: 0 column: 548 code: 548
row: 0 column: 549 code: 549
row: 0 column: 550 code: 550
row: 0 column: 551 code: 551
row: 0 column: 553 code: 553
command (EMC_SPINDLE_ON) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 554 code: 554
row: 0 column: 555 code: 555
row: 0 column: 556 code: 556
row: 0 column: 558 code: 558
row: 0 column: 559 code: 559
row: 0 column: 560 code: 560
row: 0 column: 561 code: 561
row: 0 column: 562 code: 562
row: 0 column: 563 code: 563
row: 0 column: 564 code: 564
row: 0 column: 565 code: 565
row: 0 column: 566 code: 566
row: 0 column: 567 code: 567
row: 0 column: 568 code: 568
row: 0 column: 569 code: 569
row: 0 column: 570 code: 570
row: 0 column: 571 code: 571
row: 0 column: 572 code: 572
row: 0 column: 574 code: 574
R5C4 block_delete Released
R5C5 mdi_go_home Released
row: 0 column: 575 code: 575
row: 0 column: 576 code: 576
row: 0 column: 577 code: 577
row: 0 column: 579 code: 579
row: 0 column: 580 code: 580
row: 0 column: 581 code: 581
row: 0 column: 582 code: 582
row: 0 column: 583 code: 583
row: 0 column: 584 code: 584
row: 0 column: 585 code: 585
row: 0 column: 586 code: 586
row: 0 column: 587 code: 587
row: 0 column: 588 code: 588
row: 0 column: 589 code: 589
row: 0 column: 590 code: 590
row: 0 column: 591 code: 591
row: 0 column: 592 code: 592
row: 0 column: 593 code: 593
row: 0 column: 595 code: 595
row: 0 column: 596 code: 596
row: 0 column: 597 code: 597
row: 0 column: 598 code: 598
row: 0 column: 600 code: 600
row: 0 column: 601 code: 601
row: 0 column: 602 code: 602
row: 0 column: 603 code: 603
row: 0 column: 604 code: 604
row: 0 column: 605 code: 605
row: 0 column: 606 code: 606
row: 0 column: 607 code: 607
row: 0 column: 608 code: 608
row: 0 column: 609 code: 609
row: 0 column: 610 code: 610
row: 0 column: 611 code: 611
row: 0 column: 612 code: 612
row: 0 column: 613 code: 613
row: 0 column: 614 code: 614
row: 0 column: 616 code: 616
row: 0 column: 617 code: 617
row: 0 column: 618 code: 618
row: 0 column: 619 code: 619
g53 g0 z0
row: 0 column: 621 code: 621
command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 622 code: 622
row: 0 column: 623 code: 623
row: 0 column: 624 code: 624
row: 0 column: 625 code: 625
row: 0 column: 626 code: 626
row: 0 column: 627 code: 627
row: 0 column: 628 code: 628
row: 0 column: 629 code: 629
row: 0 column: 630 code: 630
row: 0 column: 631 code: 631
row: 0 column: 632 code: 632
row: 0 column: 633 code: 633
row: 0 column: 634 code: 634
row: 0 column: 635 code: 635
row: 0 column: 637 code: 637
row: 0 column: 638 code: 638
row: 0 column: 639 code: 639
row: 0 column: 640 code: 640
row: 0 column: 642 code: 642
g53 g0 x2
row: 0 column: 643 code: 643
command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on
row: 0 column: 644 code: 644
row: 0 column: 645 code: 645
row: 0 column: 646 code: 646
row: 0 column: 647 code: 647
row: 0 column: 648 code: 648
row: 0 column: 649 code: 649
row: 0 column: 650 code: 650
row: 0 column: 651 code: 651
row: 0 column: 652 code: 652
row: 0 column: 653 code: 653
row: 0 column: 654 code: 654
row: 0 column: 655 code: 655
row: 0 column: 656 code: 656
row: 0 column: 658 code: 658
row: 0 column: 659 code: 659
row: 0 column: 660 code: 660
row: 0 column: 661 code: 661
row: 0 column: 663 code: 663
row: 0 column: 664 code: 664
row: 0 column: 665 code: 665
PYUI ERROR: no button or command assigned to keycode R5C6?
'R5C6'
R5C7 estop Released
PYUI ERROR: no button or command assigned to keycode R6C0?
'R6C0'
PYUI ERROR: no button or command assigned to keycode R6C1?
'R6C1'
R6C2 mpg_small Released
PYUI ERROR: no button or command assigned to keycode R6C3?
'R6C3'
PYUI ERROR: no button or command assigned to keycode R6C4?
'R6C4'
PYUI ERROR: no button or command assigned to keycode R6C5?
'R6C5'
PYUI ERROR: no button or command assigned to keycode R6C6?
'R6C6'
PYUI ERROR: no button or command assigned to keycode R6C7?
'R6C7'
PYUI ERROR: no button or command assigned to keycode R7C0?
'R7C0'
PYUI ERROR: no button or command assigned to keycode R7C1?
'R7C1'
R7C2 mpg_med Released
PYUI ERROR: no button or command assigned to keycode R7C3?
'R7C3'
PYUI ERROR: no button or command assigned to keycode R7C4?
'R7C4'
PYUI ERROR: no button or command assigned to keycode R7C5?
row: 0 column: 666 code: 666
'R7C5'
R7C6 override_limits Released
PYUI ERROR: no button or command assigned to keycode R7C7?
'R7C7'
PYUI ERROR: no button or command assigned to keycode R0C0?
'R0C0'
PYUI ERROR: no button or command assigned to keycode R0C1?
'R0C1'
row: 0 column: 667 code: 667
row: 0 column: 668 code: 668
row: 0 column: 669 code: 669
row: 0 column: 670 code: 670
row: 0 column: 671 code: 671
row: 0 column: 672 code: 672
row: 0 column: 673 code: 673
row: 0 column: 674 code: 674
row: 0 column: 675 code: 675
row: 0 column: 676 code: 676
row: 0 column: 677 code: 677
row: 0 column: 678 code: 678
row: 0 column: 679 code: 679
row: 0 column: 680 code: 680
row: 0 column: 681 code: 681
row: 0 column: 683 code: 683
row: 0 column: 684 code: 684
row: 0 column: 685 code: 685
row: 0 column: 686 code: 686
row: 0 column: 688 code: 688
row: 0 column: 689 code: 689
row: 0 column: 690 code: 690
row: 0 column: 691 code: 691
row: 0 column: 692 code: 692
row: 0 column: 693 code: 693
row: 0 column: 694 code: 694
row: 0 column: 695 code: 695
row: 0 column: 696 code: 696
row: 0 column: 697 code: 697
row: 0 column: 698 code: 698
row: 0 column: 699 code: 699
row: 0 column: 700 code: 700
row: 0 column: 701 code: 701
row: 0 column: 702 code: 702
row: 0 column: 703 code: 703
row: 0 column: 704 code: 704
row: 0 column: 705 code: 705
row: 0 column: 706 code: 706
row: 0 column: 707 code: 707
row: 0 column: 708 code: 708
row: 0 column: 709 code: 709
row: 0 column: 710 code: 710
row: 0 column: 712 code: 712
row: 0 column: 713 code: 713
row: 0 column: 714 code: 714
row: 0 column: 715 code: 715
row: 0 column: 717 code: 717
row: 0 column: 718 code: 718
row: 0 column: 719 code: 719
row: 0 column: 720 code: 720
row: 0 column: 721 code: 721
row: 0 column: 722 code: 722
row: 0 column: 723 code: 723
row: 0 column: 724 code: 724
row: 0 column: 725 code: 725
row: 0 column: 726 code: 726
row: 0 column: 727 code: 727
row: 0 column: 728 code: 728
row: 0 column: 729 code: 729
row: 0 column: 730 code: 730
row: 0 column: 731 code: 731
row: 0 column: 732 code: 732
row: 0 column: 733 code: 733
row: 0 column: 734 code: 734
row: 0 column: 735 code: 735
row: 0 column: 736 code: 736
row: 0 column: 737 code: 737
row: 0 column: 738 code: 738
row: 0 column: 739 code: 739
row: 0 column: 741 code: 741
row: 0 column: 742 code: 742
row: 0 column: 743 code: 743
row: 0 column: 744 code: 744
row: 0 column: 746 code: 746
row: 0 column: 747 code: 747
row: 0 column: 748 code: 748
row: 0 column: 749 code: 749
row: 0 column: 750 code: 750
row: 0 column: 751 code: 751
row: 0 column: 752 code: 752
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
task: main loop took 11.011567 seconds
USRMOT: ERROR: command timeout
task: main loop took 1.010178 seconds
USRMOT: ERROR: command timeout
task: main loop took 1.010299 seconds
USRMOT: ERROR: command timeout
task: main loop took 1.010166 seconds
<class 'Xlib.protocol.request.QueryExtension'>
<class 'Xlib.protocol.request.QueryExtension'>
USRMOT: ERROR: command timeout
task: main loop took 1.010189 seconds
USRMOT: ERROR: command timeout
task: main loop took 1.010284 seconds
USRMOT: ERROR: command timeout
task: main loop took 1.010187 seconds
USRMOT: ERROR: command timeout
task: main loop took 1.010151 seconds
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
task: main loop took 11.035807 seconds
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
/home/skunkworks/linuxcnc-dev/bin/gladevcp:295: GtkWarning: GdkWindow 0x5000003 unexpectedly destroyed
  gtk.main()
**** GLADE VCP ERROR:    X Protocol Error: 3
Shutting down and cleaning up LinuxCNC...
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
USRMOT: ERROR: command timeout
Exiting panelui's python module
Python exit
Waited 3 seconds for master.  giving up.
Note: Using POSIX non-realtime
sim_axis_hardware: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX non-realtime
sim_encoder: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX non-realtime
sim_matrix_kb: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX non-realtime
sampler: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX non-realtime
pwmgen: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX non-realtime
encoder: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX non-realtime
stepgen: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX non-realtime
sim_parport: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX non-realtime
motmod: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX non-realtime
trivkins: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
<commandline>:0: unloadrt failed
Note: Using POSIX non-realtime
skunkworks@skunkworks-Studio-XPS-1645:~/linuxcnc-dev$ git describe
v2.7.3-329-gffa984a
skunkworks@skunkworks-Studio-XPS-1645:~/linuxcnc-dev$