Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ===================================================================
- MT7621 stage1 code 13:14:00 (ASIC)
- CPU=50000000 HZ BUS=16666666 HZ
- ==================================================================
- Change MPLL source from XTAL to CR...
- do MEMPLL setting..
- MEMPLL Config : 0x11100000
- 3PLL mode + External loopback
- === XTAL-40Mhz === DDR-1200Mhz ===
- PLL2 FB_DL: 0x2, 1/0 = 644/380 09000000
- PLL3 FB_DL: 0x13, 1/0 = 563/461 4D000000
- PLL4 FB_DL: 0x1a, 1/0 = 696/328 69000000
- do DDR setting..[00320000]
- Apply DDR3 Setting...(use customer AC)
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
- 000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
- 000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0
- 0010:| 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
- 0011:| 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- rank 0 coarse = 15
- rank 0 fine = 72
- B:| 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0
- opt_dle value:9
- DRAMC_R0DELDLY[018]=00002021
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-15 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 15 10 15 13 15 11 15 8 6 13
- 10 | 10 13 10 13 8 14
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =33 DQS1 = 32
- ==================================================================
- bit DQS0 bit DQS1
- 0 (0~64)32 8 (1~59)30
- 1 (1~60)30 9 (2~62)32
- 2 (0~62)31 10 (1~62)31
- 3 (1~62)31 11 (1~58)29
- 4 (1~64)32 12 (1~60)30
- 5 (1~65)33 13 (1~62)31
- 6 (0~63)31 14 (1~62)31
- 7 (1~65)33 15 (1~61)31
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 15 13 15 15 15 11 15 8 8 13
- 10 | 11 15 12 14 9 15
- ==================================================================
- ==================================================================
- TX perbyte calibration
- ==================================================================
- DQS loop = 15, cmp_err_1 = ffff2000
- dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
- DQS loop = 14, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqsdly_pass[1]=14, finish count=2
- DQ loop=15, cmp_err_1 = ffff01a2
- DQ loop=14, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqdly_pass[0]=14, finish count=1
- dqs_perbyte_dly.last_dqdly_pass[1]=14, finish count=2
- byte:0, (DQS,DQ)=(8,8)
- byte:1, (DQS,DQ)=(8,8)
- 20,data:88
- [EMI] DRAMC calibration passed
- ===================================================================
- MT7621 stage1 code done
- CPU=50000000 HZ BUS=16666666 HZ
- ===================================================================
- U-Boot 1.1.3 (Sep 25 2015 - 19:30:10)
- Board: Ralink APSoC DRAM: 128 MB
- relocate_code Pointer at: 87fb4000
- Config XHCI 40M PLL
- flash manufacture id: c2, device id 20 18
- find flash: MX25L12805D
- *** Warning - bad CRC, using default environment
- ============================================
- Ralink UBoot Version: 4.2.1.0
- --------------------------------------------
- ASIC MT7621AS (MAC to MT7530 Mode)
- DRAM_CONF_FROM: Auto-Detection
- DRAM_TYPE: DDR3
- DRAM bus: 16 bit
- Xtal Mode=3 OCP Ratio=1/3
- Flash component: SPI Flash
- Date:Sep 25 2015 Time:19:30:10
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:256, ways:4, linesz:32 ,total:32768
- ##### The CPU freq = 880 MHZ ####
- estimate memory size =128 Mbytes
- Reset switch ...
- #Reset_MT7530
- set LAN/WAN LLLLW
- Example expects ABI version 2
- Actual U-Boot ABI version 2
- ******************************************
- Uboot StandAlone Entry
- ******************************************
- 0, cmd
- 1, 0x0000000D
- cmd : 0x0000000D
- Press Ctrl+C to Enter the Main loop...
- Example expects ABI version 2
- Actual U-Boot ABI version 2
- ******************************************
- Uboot StandAlone Entry
- ******************************************
- 0, cmd
- 1, 0x0000000F
- cmd : 0x0000000F
- Enter NMRP_main
- Flash Sector Number : 256.
- NetTxPacket = 0x87FE4340
- KSEG1ADDR(NetTxPacket) = 0xA7FE4340
- NetLoop,call eth_halt !
- NetLoop,call eth_init !
- Trying Eth0 (10/100-M)
- Waitting for RX_DMA_BUSY status Start... done
- ETH_STATE_ACTIVE!!
- NMRP_FLASH_SIZE_buffer --> a1000000.
- NMRP:LISTENING
- ### No NMRP Server found ###
- STANDALONE_LOAD_ADDR is 0xa0600000
- Example expects ABI version 2
- Actual U-Boot ABI version 2
- ******************************************
- Uboot StandAlone Entry
- ******************************************
- 0, boot
- Flash Sector Number : 256.
- ***************************************************
- Sercomm Boot Version 1.15.0
- ***************************************************
- Entering Firmware : Everything is OK.
- flash base: 0xbfc00000, kernel addr :0xbfc50000, bootloader size: 0x30000, config size 0x10000, fac size : 0x10000
- kernel addr :0xbfc50000
- System Boot system code via Flash.
- ## Booting image at bfc50000 ...
- Image Name: MIPS OpenWrt Linux-3.18.27
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1198962 Bytes = 1.1 MB
- Load Address: 80001000
- Entry Point: 80001000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- commandline in boot is : <NULL> !!!!
- No initrd
- ## Transferring control to Linux (at address 80001000) ...
- ## Giving linux memsize in MB, 128
- Starting kernel ...
- [ 0.000000] Linux version 3.18.27 (maikel@ubuntudev) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r48220) ) #8 SMP Wed Mar 23 19:10:12 CET 2016
- [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] MIPS: machine is WNR3700v5
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] debug: skip boot console de-registration.
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x07ffffff]
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
- [ 0.000000] Detected 1 available secondary CPU(s)
- [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @8110c000 s5696 r8192 d22976 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 keep_bootcon=1 rootfstype=squashfs,jffs2
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=0004030a
- [ 0.000000] Readback ErrCtl register=0004030a
- [ 0.000000] Memory: 125964K/131072K available (2700K kernel code, 144K rwdata, 524K rodata, 204K init, 228K bss, 5108K reserved, 0K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:256
- [ 0.000000] gic: revision 3.0
- [ 0.000000] CPU Clock: 880MHz
- [ 0.000000] Calibrating delay loop... 577.53 BogoMIPS (lpj=2887680)
- [ 0.060000] pid_max: default: 32768 minimum: 301
- [ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.090000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.090000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.090000] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.190000] Synchronize counters for CPU 1: done.
- [ 0.190000] Brought up 2 CPUs
- [ 0.200000] pinctrl core: initialized pinctrl subsystem
- [ 0.210000] NET: Registered protocol family 16
- [ 0.220000] pull PCIe RST: RALINK_RSTCTRL = 0
- [ 0.520000] release PCIe RST: RALINK_RSTCTRL = 7000000
- [ 0.530000] ***** Xtal 40MHz *****
- [ 0.530000] release PCIe RST: RALINK_RSTCTRL = 7000000
- [ 0.540000] Port 0 N_FTS = 1b102800
- [ 0.540000] Port 1 N_FTS = 1b102800
- [ 0.550000] Port 2 N_FTS = 1b102800
- [ 1.690000] PCIE1 no card, disable it(RST&CLK)
- [ 1.690000] -> 12007f2
- [ 1.700000] PCIE0 enabled
- [ 1.700000] PCIE2 enabled
- [ 1.710000] PCI host bridge /pcie@1e140000 ranges:
- [ 1.710000] MEM 0x0000000060000000..0x000000006fffffff
- [ 1.720000] IO 0x000000001e160000..0x000000001e16ffff
- [ 1.760000] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 1.770000] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 1.780000] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 1.790000] PCI host bridge to bus 0000:00
- [ 1.800000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 1.810000] pci_bus 0000:00: root bus resource [io 0xffffffff]
- [ 1.820000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 1.840000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.860000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.870000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 1.890000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 1.900000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
- [ 1.910000] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 1.930000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 1.940000] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
- [ 1.950000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
- [ 1.970000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
- [ 1.980000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
- [ 1.990000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- [ 2.010000] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
- [ 2.020000] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 2.030000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 2.050000] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 2.060000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
- [ 2.070000] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 2.080000] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
- [ 2.100000] BAR0 at slot 0 = 0
- [ 2.100000] bus=0x0, slot = 0x0
- [ 2.110000] BAR0 at slot 1 = 0
- [ 2.120000] bus=0x0, slot = 0x1
- [ 2.120000] bus=0x1, slot = 0x0, irq=0xff
- [ 2.130000] bus=0x2, slot = 0x1, irq=0xff
- [ 2.140000] Switched to clocksource MIPS
- [ 2.150000] NET: Registered protocol family 2
- [ 2.150000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 2.170000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- [ 2.180000] TCP: Hash tables configured (established 1024 bind 1024)
- [ 2.190000] TCP: reno registered
- [ 2.200000] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.210000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.220000] NET: Registered protocol family 1
- [ 2.230000] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 2.250000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.270000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 2.290000] msgmni has been set to 246
- [ 2.290000] io scheduler noop registered
- [ 2.300000] io scheduler deadline registered (default)
- [ 2.310000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 2.330000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 34, base_baud = 3125000) is a 16550A
- [ 2.350000] spi-mt7621 1e000b00.spi: sys_freq: 50000000
- [ 2.360000] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)
- [ 2.370000] m25p80 spi32766.0: using chunked io
- [ 2.380000] 19 ofpart partitions found on MTD device spi32766.0
- [ 2.390000] Creating 19 MTD partitions on "spi32766.0":
- [ 2.400000] 0x000000000000-0x000000040000 : "Bootloader"
- [ 2.410000] 0x000000040000-0x000000090000 : "SC PID"
- [ 2.420000] 0x000000050000-0x000000320000 : "Kernel"
- [ 2.430000] 0x0000002d0000-0x000001140000 : "Rootfs"
- [ 2.440000] mtd: partition "Rootfs" extends beyond the end of device "spi32766.0" -- size truncated to 0xd30000
- [ 2.460000] 0x000000e70000-0x000001d00000 : "ML1"
- [ 2.470000] mtd: partition "ML1" extends beyond the end of device "spi32766.0" -- size truncated to 0x190000
- [ 2.490000] 0x000000e90000-0x000000f40000 : "ML2"
- [ 2.500000] 0x000000eb0000-0x000001d80000 : "ML3"
- [ 2.510000] mtd: partition "ML3" extends beyond the end of device "spi32766.0" -- size truncated to 0x150000
- [ 2.530000] 0x000000ed0000-0x000001de0000 : "ML4"
- [ 2.540000] mtd: partition "ML4" extends beyond the end of device "spi32766.0" -- size truncated to 0x130000
- [ 2.560000] 0x000000f10000-0x000001e40000 : "ML5"
- [ 2.570000] mtd: partition "ML5" extends beyond the end of device "spi32766.0" -- size truncated to 0xf0000
- [ 2.590000] 0x000000f30000-0x000001e70000 : "Factory"
- [ 2.600000] mtd: partition "Factory" extends beyond the end of device "spi32766.0" -- size truncated to 0xd0000
- [ 2.620000] 0x000000f40000-0x000001e90000 : "SC Private Data"
- [ 2.630000] mtd: partition "SC Private Data" extends beyond the end of device "spi32766.0" -- size truncated to 0xc0000
- [ 2.650000] 0x000000f50000-0x000001eb0000 : "POT"
- [ 2.660000] mtd: partition "POT" extends beyond the end of device "spi32766.0" -- size truncated to 0xb0000
- [ 2.680000] 0x000000f60000-0x000001ee0000 : "Traffic Meter"
- [ 2.690000] mtd: partition "Traffic Meter" extends beyond the end of device "spi32766.0" -- size truncated to 0xa0000
- [ 2.720000] 0x000000f80000-0x000001f10000 : "DPF"
- [ 2.730000] mtd: partition "DPF" extends beyond the end of device "spi32766.0" -- size truncated to 0x80000
- [ 2.750000] 0x000000f90000-0x000001f30000 : "SC Nvram"
- [ 2.760000] mtd: partition "SC Nvram" extends beyond the end of device "spi32766.0" -- size truncated to 0x70000
- [ 2.780000] 0x000000fa0000-0x000001f50000 : "Ralink Nvram"
- [ 2.790000] mtd: partition "Ralink Nvram" extends beyond the end of device "spi32766.0" -- size truncated to 0x60000
- [ 2.810000] 0x000000fb0000-0x000001f80000 : "Ralink Reserved"
- [ 2.820000] mtd: partition "Ralink Reserved" extends beyond the end of device "spi32766.0" -- size truncated to 0x50000
- [ 2.840000] 0x000000fd0000-0x000001fc0000 : "ML6"
- [ 2.850000] mtd: partition "ML6" extends beyond the end of device "spi32766.0" -- size truncated to 0x30000
- [ 2.870000] 0x000000ff0000-0x000001ff0000 : "Upgrade Flag"
- [ 2.880000] mtd: partition "Upgrade Flag" extends beyond the end of device "spi32766.0" -- size truncated to 0x10000
- [ 2.910000] netif_napi_add() called with weight 128 on device eth%d
- [ 2.930000] change HW-TRAP to 0x17ccf
- [ 2.940000] ralink_soc_eth 1e100000.ethernet: generated random MAC address 32:6e:39:e0:a2:8e
- [ 2.960000] libphy: mdio: probed
- [ 2.970000] ralink_soc_eth 1e100000.ethernet: loaded mt7530 driver
- [ 2.990000] ralink_soc_eth 1e100000.ethernet eth0: ralink at 0xbe100000, irq 11
- [ 3.000000] mt7621_wdt 1e000100.wdt: Initialized
- [ 3.010000] TCP: cubic registered
- [ 3.020000] NET: Registered protocol family 17
- [ 3.030000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 3.050000] 8021q: 802.1Q VLAN Support v1.8
- [ 3.060000] Warning: unable to open an initial console.
- [ 3.080000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
- [ 3.090000] Freeing unused kernel memory: 204K (8034d000 - 80380000)
- [ 3.280000] random: nonblocking pool is initialized
- [ 4.210000] init: Console is alive
- [ 4.220000] init: - watchdog -
- [ 5.320000] usbcore: registered new interface driver usbfs
- [ 5.340000] usbcore: registered new interface driver hub
- [ 5.350000] usbcore: registered new device driver usb
- [ 5.380000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.400000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.420000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.440000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.460000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.480000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.500000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.520000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.540000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.560000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.620000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.640000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.660000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.680000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.700000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.720000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.740000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.760000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.780000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.800000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 5.900000] ralink_soc_eth 1e100000.ethernet eth0: port 3 link up
- [ 5.950000] xhci-hcd xhci-hcd: xHCI Host Controller
- [ 5.960000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
- [ 5.970000] xhci-hcd xhci-hcd: irq 30, io mem 0x1e1c0000
- [ 5.980000] hub 1-0:1.0: USB hub found
- [ 5.990000] hub 1-0:1.0: 2 ports detected
- [ 6.000000] xhci-hcd xhci-hcd: xHCI Host Controller
- [ 6.010000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
- [ 6.020000] hub 2-0:1.0: USB hub found
- [ 6.030000] hub 2-0:1.0: 1 port detected
- [ 6.230000] init: - preinit -
- [ 8.700000] mount_root: mounting /dev/root
- [ 8.730000] procd: - early -
- [ 8.730000] procd: - watchdog -
- [ 9.450000] procd: failed to set stdio
- [ 9.460000] procd: - ubus -
- [ 10.470000] procd: - init -
- [ 10.950000] NET: Registered protocol family 10
- [ 10.960000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 10.980000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
- [ 10.990000] Backport generated by backports.git backports-20151218-0-g2f58d9d
- [ 11.050000] mt76x2e 0000:01:00.0: ASIC revision: 76120044
- [ 11.090000] ROM patch already applied
- [ 11.090000] Firmware Version: 0.0.00
- [ 11.100000] Build: 1
- [ 11.110000] Build Time: 201507311614____
- [ 11.140000] Firmware running!
- [ 11.150000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.170000] nf_conntrack version 0.5.0 (1971 buckets, 7884 max)
- [ 11.260000] xt_time: kernel timezone is -0000
- [ 11.270000] PPP generic driver version 2.4.2
- [ 11.280000] NET: Registered protocol family 24
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement