API tools faq
paste
Advertisement
Guest User

вот логи

a guest
May 21st, 2014
106
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.67 KB | None | 0 0
raw download clone embed print report
  1. Покажите логи wicd
  2. syslog и dmesg тоже не помешают.
  3.  
  4. root@bt:~# wicd
  5. root@bt:~#
  6.  
  7. root@bt:~# syslog
  8. No command 'syslog' found, did you mean:
  9. Command 'dsyslog' from package 'dsyslog' (universe)
  10. Command 'syslogd' from package 'sysklogd' (universe)
  11. Command 'syslogd' from package 'inetutils-syslogd' (universe)
  12. syslog: command not found
  13. root@bt:~#
  14.  
  15. и лог root@bt:~# dmesg
  16.  
  17. [ 4.259420] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  18. [ 4.263574] VFS: Disk quotas dquot_6.5.2
  19. [ 4.263623] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  20. [ 4.263985] fuse init (API version 7.17)
  21. [ 4.264056] msgmni has been set to 1679
  22. [ 4.264349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  23. [ 4.264374] io scheduler noop registered
  24. [ 4.264378] io scheduler deadline registered
  25. [ 4.264385] io scheduler cfq registered (default)
  26. [ 4.264459] pcieport 0000:00:01.0: setting latency timer to 64
  27. [ 4.264481] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  28. [ 4.264609] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  29. [ 4.264629] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  30. [ 4.264679] vesafb: mode is 1024x768x16, linelength=2048, pages=41
  31. [ 4.264683] vesafb: scrolling: redraw
  32. [ 4.264686] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  33. [ 4.265322] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 6144k, total 65472k
  34. [ 4.265364] fbcon: VESA VGA (fb0) is primary device
  35. [ 4.265423] bootsplash 3.1.6-2004/03/31: looking for picture...
  36. [ 4.276153] silentjpeg size 69816 bytes,
  37. [ 4.276158] ...found (1024x768, 69708 bytes, v3).
  38. [ 4.312024] Console: switching to colour frame buffer device 107x34
  39. [ 4.348052] fb0: VESA VGA frame buffer device
  40. [ 4.348274] intel_idle: MWAIT substates: 0x21120
  41. [ 4.348276] intel_idle: does not run on family 6 model 58
  42. [ 4.348315] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  43. [ 4.348814] ACPI: AC Adapter [ACAD] (on-line)
  44. [ 4.349099] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
  45. [ 4.349584] ACPI: Power Button [PWRB]
  46. [ 4.349786] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input1
  47. [ 4.358371] ACPI: Sleep Button [SLPB]
  48. [ 4.366655] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
  49. [ 4.375253] ACPI: Lid Switch [LID0]
  50. [ 4.383761] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
  51. [ 4.392497] ACPI: Power Button [PWRF]
  52. [ 4.401439] Monitor-Mwait will be used to enter C-1 state
  53. [ 4.401476] Monitor-Mwait will be used to enter C-2 state
  54. [ 4.401487] ACPI: acpi_idle registered with cpuidle
  55. [ 4.447768] thermal LNXTHERM:00: registered as thermal_zone0
  56. [ 4.456481] ACPI: Thermal Zone [TZ00] (59 C)
  57. [ 4.465238] ERST: Table is not found!
  58. [ 4.473819] GHES: HEST is not enabled!
  59. [ 4.473833] isapnp: Scanning for PnP cards...
  60. [ 4.533303] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  61. [ 4.551105] ACPI: Battery Slot [BAT1] (battery present)
  62. [ 4.783986] isapnp: No Plug & Play device found
  63. [ 4.793041] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  64. [ 4.849235] Linux agpgart interface v0.103
  65. [ 4.858337] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
  66. [ 4.867570] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  67. [ 4.877703] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
  68. [ 4.886865] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
  69. [ 4.896887] brd: module loaded
  70. [ 4.906270] loop: module loaded
  71. [ 4.915099] ahci 0000:00:1f.2: version 3.0
  72. [ 4.915116] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  73. [ 4.924164] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
  74. [ 4.924189] ahci: SSS flag set, parallel bus scan disabled
  75. [ 4.948755] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
  76. [ 4.957905] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
  77. [ 4.966919] ahci 0000:00:1f.2: setting latency timer to 64
  78. [ 4.973010] scsi0 : ahci
  79. [ 4.981722] scsi1 : ahci
  80. [ 4.990272] scsi2 : ahci
  81. [ 4.998450] scsi3 : ahci
  82. [ 5.006232] scsi4 : ahci
  83. [ 5.013901] scsi5 : ahci
  84. [ 5.021203] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 41
  85. [ 5.028549] ata2: DUMMY
  86. [ 5.035758] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 41
  87. [ 5.043126] ata4: DUMMY
  88. [ 5.050187] ata5: DUMMY
  89. [ 5.056972] ata6: DUMMY
  90. [ 5.063743] Fixed MDIO Bus: probed
  91. [ 5.070207] tun: Universal TUN/TAP device driver, 1.6
  92. [ 5.076699] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  93. [ 5.083367] arcnet loaded.
  94. [ 5.089941] PPP generic driver version 2.4.2
  95. [ 5.096657] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  96. [ 5.103307] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  97. [ 5.109843] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  98. [ 5.109847] ehci_hcd 0000:00:1a.0: EHCI Host Controller
  99. [ 5.116272] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  100. [ 5.122767] ehci_hcd 0000:00:1a.0: debug port 2
  101. [ 5.132957] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
  102. [ 5.132971] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd3a19000
  103. [ 5.152480] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  104. [ 5.158723] hub 1-0:1.0: USB hub found
  105. [ 5.164756] hub 1-0:1.0: 2 ports detected
  106. [ 5.170745] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  107. [ 5.176940] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  108. [ 5.176943] ehci_hcd 0000:00:1d.0: EHCI Host Controller
  109. [ 5.183002] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  110. [ 5.189232] ehci_hcd 0000:00:1d.0: debug port 2
  111. [ 5.199121] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
  112. [ 5.199134] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd3a18000
  113. [ 5.220387] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  114. [ 5.226267] hub 2-0:1.0: USB hub found
  115. [ 5.231904] hub 2-0:1.0: 2 ports detected
  116. [ 5.236355] Refined TSC clocksource calibration: 2494.333 MHz.
  117. [ 5.236358] Switching to clocksource tsc
  118. [ 5.248978] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  119. [ 5.255098] uhci_hcd: USB Universal Host Controller Interface driver
  120. [ 5.261399] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  121. [ 5.267941] xhci_hcd 0000:00:14.0: setting latency timer to 64
  122. [ 5.267944] xhci_hcd 0000:00:14.0: xHCI Host Controller
  123. [ 5.274329] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
  124. [ 5.280803] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  125. [ 5.280816] xhci_hcd 0000:00:14.0: irq 21, io mem 0xd3a00000
  126. [ 5.287063] xhci_hcd 0000:00:14.0: Failed to enable MSI-X
  127. [ 5.293185] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
  128. [ 5.293269] xHCI xhci_add_endpoint called for root hub
  129. [ 5.293271] xHCI xhci_check_bandwidth called for root hub
  130. [ 5.293288] hub 3-0:1.0: USB hub found
  131. [ 5.299475] hub 3-0:1.0: 4 ports detected
  132. [ 5.305764] xhci_hcd 0000:00:14.0: xHCI Host Controller
  133. [ 5.312185] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
  134. [ 5.318745] xHCI xhci_add_endpoint called for root hub
  135. [ 5.318747] xHCI xhci_check_bandwidth called for root hub
  136. [ 5.318763] hub 4-0:1.0: USB hub found
  137. [ 5.325150] hub 4-0:1.0: 4 ports detected
  138. [ 5.376276] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
  139. [ 5.380172] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  140. [ 5.386539] ata1.00: failed to enable AA (error_mask=0x1)
  141. [ 5.386542] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
  142. [ 5.386543] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  143. [ 5.392909] ata1.00: failed to enable AA (error_mask=0x1)
  144. [ 5.392912] ata1.00: configured for UDMA/100
  145. [ 5.400255] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5
  146. [ 5.400377] sd 0:0:0:0: Attached scsi generic sg0 type 0
  147. [ 5.400444] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  148. [ 5.400446] sd 0:0:0:0: [sda] 4096-byte physical blocks
  149. [ 5.400490] sd 0:0:0:0: [sda] Write Protect is off
  150. [ 5.400493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  151. [ 5.400511] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  152. [ 5.480650] serio: i8042 KBD port at 0x60,0x64 irq 1
  153. [ 5.484034] usb 1-1: new high-speed USB device number 2 using ehci_hcd
  154. [ 5.495146] serio: i8042 AUX port at 0x60,0x64 irq 12
  155. [ 5.502616] mousedev: PS/2 mouse device common for all mice
  156. [ 5.510191] rtc_cmos 00:06: RTC can wake from S4
  157. [ 5.517799] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  158. [ 5.525346] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
  159. [ 5.532956] device-mapper: uevent: version 1.0.3
  160. [ 5.540493] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  161. [ 5.548274] EISA: Probing bus 0 at eisa.0
  162. [ 5.555950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  163. [ 5.563923] EISA: Cannot allocate resource for mainboard
  164. [ 5.563925] Cannot allocate resource for EISA slot 1
  165. [ 5.563926] Cannot allocate resource for EISA slot 2
  166. [ 5.563927] Cannot allocate resource for EISA slot 3
  167. [ 5.563928] Cannot allocate resource for EISA slot 4
  168. [ 5.563929] Cannot allocate resource for EISA slot 5
  169. [ 5.563930] Cannot allocate resource for EISA slot 6
  170. [ 5.563931] Cannot allocate resource for EISA slot 7
  171. [ 5.563932] Cannot allocate resource for EISA slot 8
  172. [ 5.563933] EISA: Detected 0 cards.
  173. [ 5.563939] cpufreq-nforce2: No nForce2 chipset.
  174. [ 5.563997] cpuidle: using governor ladder
  175. [ 5.628004] hub 1-1:1.0: USB hub found
  176. [ 5.628099] hub 1-1:1.0: 6 ports detected
  177. [ 5.664603] cpuidle: using governor menu
  178. [ 5.670809] EFI Variables Facility v0.08 2004-May-17
  179. [ 5.677208] TCP cubic registered
  180. [ 5.683373] NET: Registered protocol family 10
  181. [ 5.689696] NET: Registered protocol family 17
  182. [ 5.695519] Registering the dns_resolver key type
  183. [ 5.701312] Using IPI No-Shortcut mode
  184. [ 5.707186] registered taskstats version 1
  185. [ 5.719892] rtc_cmos 00:06: setting system clock to 2014-05-21 02:59:32 UTC (1400641172)
  186. [ 5.726412] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  187. [ 5.731520] EDD information not available.
  188. [ 5.739732] usb 2-1: new high-speed USB device number 2 using ehci_hcd
  189. [ 5.767592] sda: sda1 sda2 sda3 < sda5 >
  190. [ 5.772988] sd 0:0:0:0: [sda] Attached SCSI disk
  191. [ 5.783682] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  192. [ 5.789155] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
  193. [ 5.795058] ata3.00: configured for UDMA/100
  194. [ 5.802147] scsi 2:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
  195. [ 5.810367] sr0: scsi3-mmc drive: 31x/62x writer dvd-ram cd/rw xa/form2 cdda tray
  196. [ 5.815513] cdrom: Uniform CD-ROM driver Revision: 3.20
  197. [ 5.820631] sr 2:0:0:0: Attached scsi CD-ROM sr0
  198. [ 5.820677] sr 2:0:0:0: Attached scsi generic sg1 type 5
  199. [ 5.825761] Freeing unused kernel memory: 704k freed
  200. [ 5.831007] Write protecting the kernel text: 5508k
  201. [ 5.836270] Write protecting the kernel read-only data: 2108k
  202. [ 5.858625] udev: starting version 151
  203. [ 5.864253] udevd (113): /proc/113/oom_adj is deprecated, please use /proc/113/oom_score_adj instead.
  204. [ 5.876061] hub 2-1:1.0: USB hub found
  205. [ 5.882271] hub 2-1:1.0: 6 ports detected
  206. [ 5.895072] wmi: Mapper loaded
  207. [ 5.905921] [drm] Initialized drm 1.1.0 20060810
  208. [ 5.914736] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
  209. [ 5.920731] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  210. [ 5.926785] nouveau 0000:01:00.0: setting latency timer to 64
  211. [ 5.927687] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1180a1)
  212. [ 5.933882] checking generic (e0000000 3ff0000) vs hw (c0000000 10000000)
  213. [ 5.933883] checking generic (e0000000 3ff0000) vs hw (d0000000 2000000)
  214. [ 5.936525] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
  215. [ 5.952452] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
  216. [ 5.958634] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
  217. [ 5.964882] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
  218. [ 5.971215] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM
  219. [ 5.987370] nouveau 0000:01:00.0: Invalid ROM contents
  220. [ 5.994145] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
  221. [ 6.000652] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI
  222. [ 6.007073] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
  223. [ 6.007368] usb 3-2: new low-speed USB device number 2 using xhci_hcd
  224. [ 6.019677] [drm] nouveau 0000:01:00.0: No valid BIOS image found
  225. [ 6.025662] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  226. [ 6.026501] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  227. [ 6.026964] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  228. [ 6.027149] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  229. [ 6.028259] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  230. [ 6.059301] nouveau 0000:01:00.0: PCI INT A disabled
  231. [ 6.195115] usb 3-3: new low-speed USB device number 3 using xhci_hcd
  232. [ 6.230711] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  233. [ 6.241448] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  234. [ 6.249065] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  235. [ 6.255595] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  236. [ 6.262132] usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
  237. [ 6.272610] xhci_hcd 0000:00:14.0: WARN: Stalled endpoint
  238. [ 6.280184] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input5
  239. [ 6.293417] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
  240. [ 6.315870] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input6
  241. [ 6.323272] generic-usb 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-3/input0
  242. [ 6.338797] xhci_hcd 0000:00:14.0: WARN: Stalled endpoint
  243. [ 6.346171] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
  244. [ 6.360532] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  245. [ 6.369284] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  246. [ 6.376639] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input7
  247. [ 6.384550] generic-usb 0003:04D9:1702.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-3/input1
  248. [ 6.400668] usbcore: registered new interface driver usbhid
  249. [ 6.408732] usbhid: USB HID core driver
  250. [ 6.447528] usbcore: registered new interface driver uas
  251. [ 6.455866] Initializing USB Mass Storage driver...
  252. [ 6.463861] scsi6 : usb-storage 1-1.2:1.4
  253. [ 6.471750] scsi7 : usb-storage 1-1.2:1.5
  254. [ 6.479460] usbcore: registered new interface driver usb-storage
  255. [ 6.487156] USB Mass Storage support registered.
  256. [ 6.514866] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
  257. [ 6.690631] usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
  258. [ 6.862384] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
  259. [ 7.320283] aufs 3.2-20120109
  260. [ 7.470550] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
  261. [ 7.472035] sr1: scsi-1 drive
  262. [ 7.472136] sr 6:0:0:0: Attached scsi CD-ROM sr1
  263. [ 7.472309] sr 6:0:0:0: Attached scsi generic sg2 type 5
  264. [ 7.478157] scsi 7:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
  265. [ 7.478515] sd 7:0:0:0: Attached scsi generic sg3 type 0
  266. [ 7.479223] sd 7:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
  267. [ 7.479830] sd 7:0:0:0: [sdb] Write Protect is off
  268. [ 7.479835] sd 7:0:0:0: [sdb] Mode Sense: 0f 00 00 00
  269. [ 7.480329] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  270. [ 7.484451] sdb: sdb1
  271. [ 7.487207] sd 7:0:0:0: [sdb] Attached SCSI removable disk
  272. [ 10.218846] ISO 9660 Extensions: Microsoft Joliet Level 3
  273. [ 10.281509] ISO 9660 Extensions: RRIP_1991A
  274. [ 10.413915] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  275. [ 55.399939] udev: starting version 151
  276. [ 59.306053] usbcore: registered new interface driver usbserial
  277. [ 59.306066] USB Serial support registered for generic
  278. [ 59.306167] usbcore: registered new interface driver usbserial_generic
  279. [ 59.306169] usbserial: USB Serial Driver core
  280. [ 59.729210] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
  281. [ 59.735888] USB Serial support registered for GSM modem (1-port)
  282. [ 59.735965] option 1-1.2:1.0: GSM modem (1-port) converter detected
  283. [ 59.738415] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
  284. [ 59.738444] option 1-1.2:1.2: GSM modem (1-port) converter detected
  285. [ 59.738558] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
  286. [ 59.738572] option 1-1.2:1.3: GSM modem (1-port) converter detected
  287. [ 59.738739] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
  288. [ 59.738818] usbcore: registered new interface driver option
  289. [ 59.738820] option: v0.7.2:USB Driver for GSM modems
  290. [ 60.416596] mei: module is from the staging directory, the quality is unknown, you have been warned.
  291. [ 60.416831] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  292. [ 60.416839] mei 0000:00:16.0: setting latency timer to 64
  293. [ 60.416889] mei 0000:00:16.0: irq 43 for MSI/MSI-X
  294. [ 60.587999] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
  295. [ 60.588499] Initializing rts5139 USB card reader driver...
  296. [ 60.590222] lp: driver loaded but no devices found
  297. [ 60.593870] scsi8 : SCSI emulation for RTS5139 USB card reader
  298. [ 60.594037] scsi 8:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
  299. [ 60.594042] usbcore: registered new interface driver rts5139
  300. [ 60.594044] Realtek rts5139 USB card reader support registered.
  301. [ 60.598163] sd 8:0:0:0: Attached scsi generic sg4 type 0
  302. [ 60.600481] sd 8:0:0:0: [sdc] Attached SCSI removable disk
  303. [ 60.907621] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
  304. [ 60.976058] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
  305. [ 61.137012] Linux video capture interface: v2.00
  306. [ 61.700554] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e1)
  307. [ 61.701592] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input10
  308. [ 61.701952] usbcore: registered new interface driver uvcvideo
  309. [ 61.701955] USB Video Class driver (1.1.1)
  310. [ 62.248805] cfg80211: Calling CRDA to update world regulatory domain
  311. [ 64.582597] brcmsmac 0000:03:00.0: bus 3 slot 0 func 0 irq 7
  312. [ 64.582644] brcmsmac 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  313. [ 64.582652] brcmsmac 0000:03:00.0: setting latency timer to 64
  314. [ 65.251911] cfg80211: World regulatory domain updated:
  315. [ 65.251914] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  316. [ 65.251917] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  317. [ 65.251920] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  318. [ 65.251922] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  319. [ 65.251925] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  320. [ 65.251928] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  321. [ 65.272134] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  322. [ 65.272137] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  323. [ 65.272140] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  324. [ 65.272142] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  325. [ 65.272144] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  326. [ 65.272147] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  327. [ 65.272149] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  328. [ 65.272152] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  329. [ 65.272154] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  330. [ 65.272156] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  331. [ 65.272159] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  332. [ 65.272161] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  333. [ 65.272163] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  334. [ 65.272165] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  335. [ 65.272167] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  336. [ 65.272170] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  337. [ 65.272172] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  338. [ 65.272174] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  339. [ 65.272176] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  340. [ 65.272179] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  341. [ 65.272181] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  342. [ 65.272183] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  343. [ 65.272186] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  344. [ 65.272188] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  345. [ 65.272190] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  346. [ 65.272193] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  347. [ 65.272195] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  348. [ 65.272198] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  349. [ 65.278873] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  350. [ 65.279307] cfg80211: Calling CRDA for country: US
  351. [ 65.281451] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  352. [ 65.281455] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  353. [ 65.281457] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  354. [ 65.281460] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  355. [ 65.281462] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  356. [ 65.281465] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  357. [ 65.281467] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  358. [ 65.281470] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  359. [ 65.281472] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  360. [ 65.281475] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  361. [ 65.281477] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  362. [ 65.281479] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  363. [ 65.281481] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  364. [ 65.281483] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  365. [ 65.281485] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  366. [ 65.281487] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  367. [ 65.281489] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  368. [ 65.281491] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  369. [ 65.281493] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  370. [ 65.281495] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  371. [ 65.281497] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  372. [ 65.281501] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  373. [ 65.281502] cfg80211: Disabling freq 2467 MHz
  374. [ 65.281504] cfg80211: Disabling freq 2472 MHz
  375. [ 65.281505] cfg80211: Disabling freq 2484 MHz
  376. [ 65.281508] cfg80211: Regulatory domain changed to country: US
  377. [ 65.281509] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  378. [ 65.281511] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  379. [ 65.281513] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  380. [ 65.281515] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  381. [ 65.281517] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  382. [ 65.281519] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  383. [ 65.281522] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  384. [ 66.128026] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  385. [ 66.128074] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
  386. [ 66.128100] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
  387. [ 66.202723] usb 3-2: USB disconnect, device number 2
  388. [ 66.999935] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
  389. [ 67.000077] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  390. [ 67.547385] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
  391. [ 67.547389] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
  392. [ 67.548470] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
  393. [ 67.548566] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  394. [ 67.751486] usb 3-2: new low-speed USB device number 4 using xhci_hcd
  395. [ 67.769967] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  396. [ 67.770770] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  397. [ 67.771156] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  398. [ 67.771383] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  399. [ 67.772637] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
  400. [ 67.772998] xhci_hcd 0000:00:14.0: WARN: Stalled endpoint
  401. [ 67.774306] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input12
  402. [ 67.774393] generic-usb 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
  403. [ 144.248417] ISO 9660 Extensions: Microsoft Joliet Level 1
  404. [ 144.249043] ISOFS: changing to secondary root
  405. root@bt:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!