API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 8th, 2014
71
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.30 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 0.000000] Booting Linux on physical CPU 0
  2. <6>[ 0.000000] Initializing cgroup subsys cpu
  3. <5>[ 0.000000] Linux version 3.5.3-00283-g190cb64-dirty (liar@liar-desktop2) (gcc version 4.7.3 (GCC) ) #72 PREEMPT Wed Jan 8 14:00:09 CET 2014
  4. <4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  5. <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. <4>[ 0.000000] Machine: Nokia RM-680 board
  7. <6>[ 0.000000] Reserving 6291456 bytes SDRAM for VRAM
  8. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  9. <7>[ 0.000000] On node 0 totalpages: 258816
  10. <7>[ 0.000000] free_area_init_node: node 0, pgdat c06df624, node_mem_map c0c14000
  11. <7>[ 0.000000] Normal zone: 1520 pages used for memmap
  12. <7>[ 0.000000] Normal zone: 0 pages reserved
  13. <7>[ 0.000000] Normal zone: 189712 pages, LIFO batch:31
  14. <7>[ 0.000000] HighMem zone: 528 pages used for memmap
  15. <7>[ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
  16. <6>[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  17. <6>[ 0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
  18. <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  19. <7>[ 0.000000] pcpu-alloc: [0] 0
  20. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256768
  21. <5>[ 0.000000] Kernel command line: init=/sbin/preinit root=/dev/mmcblk0p1 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoops.mtddev=log mtdoops.record_size=65536 console=ttyS0,115200n8 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) bootreason=usb bootmode=normal nolo=2.3.6 product_name=RM-696 dbi-type=V5JW dbi-vendor=1 dbi-size=73 dbi-uid=01234142460010005011 imei=357923041053317 g_nokia.iSerialNumber=357923041053317 serialnumber=CCM955238 omap_sec.kci=958 gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output omapdss.def_disp_enabled=1 vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a product_model=N9 hwid=1501 vram=6m omapfb.vram=0:6M console=ttyS0,115200n8 omap3_die_id
  22. <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  23. <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. <6>[ 0.000000] allocated 2097152 bytes of page_cgroup
  26. <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  27. <6>[ 0.000000] Memory: 747MB 264MB = 1011MB total
  28. <5>[ 0.000000] Memory: 1011760k/1011760k available, 36816k reserved, 270336K highmem
  29. <5>[ 0.000000] Virtual kernel memory layout:
  30. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  31. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  32. <5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  33. <5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  34. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. <5>[ 0.000000] .text : 0xc0008000 - 0xc064be98 (6416 kB)
  37. <5>[ 0.000000] .init : 0xc064c000 - 0xc067c3dc ( 193 kB)
  38. <5>[ 0.000000] .data : 0xc067e000 - 0xc06e0380 ( 393 kB)
  39. <5>[ 0.000000] .bss : 0xc06e03a4 - 0xc0c13870 (5326 kB)
  40. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  41. <6>[ 0.000000] NR_IRQS:474
  42. <6>[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  43. <6>[ 0.000000] Total of 96 interrupts on 1 active controller
  44. <6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  45. <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  46. <6>[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  47. <6>[ 0.000000] Console: colour dummy device 80x30
  48. <4>[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  49. <4>[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  50. <4>[ 0.000000] ... MAX_LOCK_DEPTH: 48
  51. <4>[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  52. <4>[ 0.000000] ... CLASSHASH_SIZE: 4096
  53. <4>[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  54. <4>[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  55. <4>[ 0.000000] ... CHAINHASH_SIZE: 16384
  56. <4>[ 0.000000] memory used by lock dependency info: 3695 kB
  57. <4>[ 0.000000] per task-struct memory footprint: 1152 bytes
  58. <6>[ 0.000427] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
  59. <6>[ 0.085906] pid_max: default: 32768 minimum: 301
  60. <6>[ 0.086334] Security Framework initialized
  61. <6>[ 0.086456] Mount-cache hash table entries: 512
  62. <6>[ 0.090454] Initializing cgroup subsys cpuacct
  63. <6>[ 0.090484] Initializing cgroup subsys memory
  64. <6>[ 0.090667] Initializing cgroup subsys devices
  65. <6>[ 0.090698] Initializing cgroup subsys freezer
  66. <6>[ 0.090911] CPU: Testing write buffer coherency: ok
  67. <6>[ 0.091735] Setting up static identity map for 0x80495330 - 0x80495388
  68. <6>[ 0.095092] devtmpfs: initialized
  69. <6>[ 0.108062] dummy:
  70. <6>[ 0.109741] NET: Registered protocol family 16
  71. <6>[ 0.110992] GPMC revision 5.0
  72. <3>[ 0.111206] gpmc: irq-20 could not claim: err -22
  73. <7>[ 0.115570] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
  74. <6>[ 0.116058] OMAP GPIO hardware version 2.5
  75. <7>[ 0.116668] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
  76. <7>[ 0.117645] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
  77. <7>[ 0.118560] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
  78. <7>[ 0.119476] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
  79. <7>[ 0.120361] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
  80. <6>[ 0.122955] RM-680/696 board, rev 1501
  81. <6>[ 0.122985] omap_mux_init: Add partition: #1: core, flags: 0
  82. <3>[ 0.126495] _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
  83. <6>[ 0.127929] Reprogramming SDRC clock to 390400000 Hz
  84. <6>[ 0.128295] wl1271 SDIO
  85. <6>[ 0.133453] hw-breakpoint: debug architecture 0x4 unsupported.
  86. <4>[ 0.139862] omap-mcbsp.2: alias fck already exists
  87. <4>[ 0.140197] omap-mcbsp.3: alias fck already exists
  88. <6>[ 0.142578] Reserving DMA channels 0 and 1 for HS ROM code
  89. <6>[ 0.142578] OMAP DMA hardware revision 5.0
  90. <6>[ 0.157409] bio: create slab <bio-0> at 0
  91. <6>[ 0.159393] vwl1271: 1800 mV
  92. <6>[ 0.160003] vbat: 3700 mV
  93. <6>[ 0.160705] rm680_vemmc: 2900 mV normal standby
  94. <5>[ 0.162017] SCSI subsystem initialized
  95. <6>[ 0.162628] usbcore: registered new interface driver usbfs
  96. <6>[ 0.162780] usbcore: registered new interface driver hub
  97. <6>[ 0.163238] usbcore: registered new device driver usb
  98. <6>[ 0.164123] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2900 kHz
  99. <6>[ 0.171722] twl 1-0048: PIH (irq 7) chaining IRQs 320..328
  100. <6>[ 0.172332] twl 1-0048: power (irq 325) chaining IRQs 328..335
  101. <6>[ 0.174530] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
  102. <7>[ 0.175628] gpiochip_add: registered GPIOs 192 to 209 on device: twl4030
  103. <6>[ 0.177429] VUSB1V5: 1500 mV normal standby
  104. <6>[ 0.178833] VUSB1V8: 1800 mV normal standby
  105. <6>[ 0.180053] VUSB3V1: 3100 mV normal standby
  106. <7>[ 0.183715] twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 0
  107. <6>[ 0.184356] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  108. <6>[ 0.186523] rm696_vio: 1800 mV normal standby
  109. <6>[ 0.188018] vdd_mpu_iva: 600 <--> 1450 mV normal
  110. <6>[ 0.189086] vdd_core: 600 <--> 1450 mV normal
  111. <6>[ 0.190124] VDAC: 1800 mV normal standby
  112. <6>[ 0.191345] VPLL2: 1800 mV normal standby
  113. <6>[ 0.192657] rm696_vmmc2: 3000 mV normal standby
  114. <6>[ 0.193939] rm696_vaux1: 2800 mV normal standby
  115. <6>[ 0.195190] rm696_vaux4: 2800 mV normal standby
  116. <6>[ 0.196380] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
  117. <6>[ 0.211181] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 400 kHz
  118. <6>[ 0.212371] Linux video capture interface: v2.00
  119. <6>[ 0.213317] omap-iommu omap-iommu.0: isp registered
  120. <6>[ 0.213806] Advanced Linux Sound Architecture Driver Version 1.0.25.
  121. <6>[ 0.216186] Bluetooth: Core ver 2.16
  122. <6>[ 0.216308] NET: Registered protocol family 31
  123. <6>[ 0.216339] Bluetooth: HCI device and connection manager initialized
  124. <6>[ 0.216430] Bluetooth: HCI socket layer initialized
  125. <6>[ 0.216430] Bluetooth: L2CAP socket layer initialized
  126. <6>[ 0.216522] Bluetooth: SCO socket layer initialized
  127. <6>[ 0.216552] nfc: nfc_init: NFC Core ver 0.1
  128. <6>[ 0.216796] NET: Registered protocol family 39
  129. <6>[ 0.217590] Switching to clocksource 32k_counter
  130. <6>[ 0.248229] NET: Registered protocol family 2
  131. <6>[ 0.248901] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  132. <6>[ 0.250640] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  133. <6>[ 0.254333] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
  134. <6>[ 0.294616] TCP: Hash tables configured (established 131072 bind 65536)
  135. <6>[ 0.294708] TCP: reno registered
  136. <6>[ 0.294738] UDP hash table entries: 512 (order: 3, 40960 bytes)
  137. <6>[ 0.295410] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  138. <6>[ 0.296661] NET: Registered protocol family 1
  139. <6>[ 0.299682] omap_dsp_init: 600000 bytes @ aec00000
  140. <6>[ 0.303619] audit: initializing netlink socket (disabled)
  141. <5>[ 0.303985] type=2000 audit(0.296:1): initialized
  142. <4>[ 0.448028] highmem bounce pool size: 64 pages
  143. <6>[ 0.474884] fuse init (API version 7.19)
  144. <6>[ 0.479064] Btrfs loaded
  145. <6>[ 0.479125] msgmni has been set to 1448
  146. <6>[ 0.486083] io scheduler noop registered
  147. <6>[ 0.486114] io scheduler deadline registered
  148. <6>[ 0.486236] io scheduler cfq registered (default)
  149. <6>[ 0.546142] OMAP DSS rev 2.0
  150. <6>[ 0.546386] OMAP DISPC rev 3.0
  151. <6>[ 0.546722] OMAP VENC rev 2
  152. <6>[ 0.547424] OMAP DSI rev 1.0
  153. <6>[ 0.563323] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  154. <6>[ 0.567626] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  155. <6>[ 0.569061] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  156. <6>[ 0.570251] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  157. <6>[ 0.571319] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  158. <6>[ 0.589996] brd: module loaded
  159. <6>[ 0.600402] loop: module loaded
  160. <6>[ 0.623596] lis3lv02d: 8 bits sensor found
  161. <6>[ 0.679779] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0
  162. <6>[ 0.691345] OneNAND driver initializing
  163. <6>[ 0.691955] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 83 MHz
  164. <7>[ 0.692321] OneNAND Manufacturer: Samsung (0xec)
  165. <6>[ 0.692352] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
  166. <6>[ 0.692352] OneNAND version = 0x0232
  167. <7>[ 0.692352] Chip support all block unlock
  168. <7>[ 0.692382] Chip has 4KiB pagesize
  169. <7>[ 0.692382] Chip has cache program feature
  170. <6>[ 0.692413] Scanning device for bad blocks
  171. <7>[ 0.704620] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x4f addr8 0x0
  172. <6>[ 0.704650] OneNAND eraseblock 79 is an initial bad block
  173. <7>[ 0.704742] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x50 addr8 0x0
  174. <6>[ 0.704772] OneNAND eraseblock 80 is an initial bad block
  175. <7>[ 0.705627] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x56 addr8 0x0
  176. <6>[ 0.705657] OneNAND eraseblock 86 is an initial bad block
  177. <5>[ 0.999023] 6 cmdlinepart partitions found on MTD device omap2-onenand
  178. <5>[ 0.999023] Creating 6 MTD partitions on "omap2-onenand":
  179. <5>[ 0.999053] 0x000000000000-0x000000100000 : "bootloader"
  180. <5>[ 1.001220] 0x000000100000-0x0000003c0000 : "config"
  181. <5>[ 1.002319] 0x0000003c0000-0x0000013c0000 : "kernel"
  182. <5>[ 1.004089] 0x0000013c0000-0x0000015c0000 : "log"
  183. <7>[ 1.007537] mtdoops: ready 28, 116 (no erase)
  184. <6>[ 1.007537] mtdoops: Attached to MTD device 3
  185. <5>[ 1.007568] 0x0000015c0000-0x00001e000000 : "var"
  186. <5>[ 1.031921] 0x00001e000000-0x000020000000 : "moslo"
  187. <6>[ 1.039764] tun: Universal TUN/TAP device driver, 1.6
  188. <6>[ 1.039794] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  189. <6>[ 1.040649] usbcore: registered new interface driver asix
  190. <6>[ 1.040771] usbcore: registered new interface driver cdc_ether
  191. <6>[ 1.040924] usbcore: registered new interface driver smsc95xx
  192. <6>[ 1.041046] usbcore: registered new interface driver net1080
  193. <6>[ 1.041137] usbcore: registered new interface driver cdc_subset
  194. <6>[ 1.041259] usbcore: registered new interface driver zaurus
  195. <6>[ 1.041412] usbcore: registered new interface driver cdc_ncm
  196. <6>[ 1.042388] usbcore: registered new interface driver cdc_wdm
  197. <6>[ 1.042419] Initializing USB Mass Storage driver...
  198. <6>[ 1.042572] usbcore: registered new interface driver usb-storage
  199. <6>[ 1.042572] USB Mass Storage support registered.
  200. <6>[ 1.042999] usbcore: registered new interface driver libusual
  201. <6>[ 1.043029] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  202. <7>[ 1.050933] twl4030_usb twl4030_usb: twl4030_phy_resume
  203. <7>[ 1.051269] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  204. <7>[ 1.051269] musb-hdrc: MHDRC RTL version 1.800
  205. <7>[ 1.051300] musb-hdrc: setup fifo_mode 4
  206. <7>[ 1.051300] musb-hdrc: 28/31 max ep, 16384/16384 memory
  207. <6>[ 1.053192] musb-hdrc musb-hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
  208. <7>[ 1.055877] twl4030_usb twl4030_usb: twl4030_phy_suspend
  209. <4>[ 1.069458] i2c-core: driver [atmel_mxt] using legacy suspend method
  210. <4>[ 1.069488] i2c-core: driver [atmel_mxt] using legacy resume method
  211. <6>[ 1.071258] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
  212. <6>[ 1.073913] twl_rtc twl_rtc: Enabling TWL-RTC
  213. <6>[ 1.078369] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  214. <6>[ 1.079376] i2c /dev entries driver
  215. <6>[ 1.081939] Driver for 1-wire Dallas network protocol.
  216. <6>[ 1.086212] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  217. <6>[ 1.087402] Bluetooth: HCI UART driver ver 2.2
  218. <6>[ 1.087432] Bluetooth: HCI H4 protocol initialized
  219. <6>[ 1.087432] Bluetooth: HCI BCSP protocol initialized
  220. <6>[ 1.087463] Bluetooth: HCILL protocol initialized
  221. <6>[ 1.087585] hci_h4p hci_h4p: Registering HCI H4P device
  222. <6>[ 1.090362] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  223. <6>[ 1.092529] cpuidle: using governor ladder
  224. <6>[ 1.092559] cpuidle: using governor menu
  225. <4>[ 1.093627] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
  226. <6>[ 1.140289] input: Atmel mXT Touchscreen as /devices/platform/omap_i2c.2/i2c-2/2-004b/input/input2
  227. <6>[ 1.141296] atmel_mxt: Atmel mXT Touchscreen v1.6 (0x29b82f) var:0x1 bld:0xab
  228. <4>[ 1.142822] omap_hsmmc omap_hsmmc.2: Failed to get debounce clk
  229. <6>[ 1.194702] omap_sham_mod_init: loading omap-sham driver
  230. <6>[ 1.195007] omap-sham omap-sham: hw accel on OMAP rev 0.9
  231. <6>[ 1.197723] usbcore: registered new interface driver usbhid
  232. <6>[ 1.197753] usbhid: USB HID core driver
  233. <6>[ 1.210693] DSP Bridge driver loaded
  234. <6>[ 1.212768] ashmem: initialized
  235. <6>[ 1.213378] logger: created 256K log 'log_main'
  236. <6>[ 1.213958] logger: created 256K log 'log_events'
  237. <6>[ 1.214447] logger: created 256K log 'log_radio'
  238. <6>[ 1.214965] logger: created 256K log 'log_system'
  239. <6>[ 1.226165] ALSA SoC for TWL4030 on Nokia DFL61 init
  240. <4>[ 1.291320] twl4030-codec twl4030-codec: ASoC: Failed to create Capture debugfs file
  241. <6>[ 1.299194] asoc: twl4030-hifi <-> omap-mcbsp.3 mapping ok
  242. <6>[ 1.304595] mmc0: new high speed MMC card at address 0001
  243. <6>[ 1.307067] input: dfl61-twl4030 Jack as /devices/platform/dfl61audio-twl4030/sound/card0/input3
  244. <6>[ 1.309509] mmcblk0: mmc0:0001 MMC64G 59.7 GiB
  245. <6>[ 1.310241] DFL61 TWL SoC init done (config 4)
  246. <6>[ 1.310638] ALSA for WL1273 on Nokia DFL61 init
  247. <3>[ 1.311065] Error: -517
  248. <6>[ 1.311126] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
  249. <6>[ 1.311431] ALSA for TLV320DAC33 on Nokia DFL61 init
  250. <6>[ 1.313476] mmcblk0boot0: mmc0:0001 MMC64G partition 1 2.00 MiB
  251. <6>[ 1.313903] mmcblk0boot1: mmc0:0001 MMC64G partition 2 2.00 MiB
  252. <6>[ 1.319885] mmcblk0: p1 p2 p3 p4
  253. <6>[ 1.330505] asoc: tlv320dac33-hifi <-> omap-mcbsp.2 mapping ok
  254. <6>[ 1.330932] mmcblk0boot1: unknown partition table
  255. <6>[ 1.335418] mmcblk0boot0: unknown partition table
  256. <6>[ 1.336822] DFL61 TLV320DAC33 init done
  257. <6>[ 1.337097] oprofile: hardware counters not available
  258. <6>[ 1.337127] oprofile: using timer interrupt.
  259. <6>[ 1.337921] TCP: cubic registered
  260. <6>[ 1.337951] NET: Registered protocol family 17
  261. <6>[ 1.338195] NET: Registered protocol family 15
  262. <6>[ 1.338714] Bluetooth: RFCOMM TTY layer initialized
  263. <6>[ 1.338775] Bluetooth: RFCOMM socket layer initialized
  264. <6>[ 1.338806] Bluetooth: RFCOMM ver 1.11
  265. <6>[ 1.338806] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  266. <6>[ 1.338836] Bluetooth: BNEP filters: protocol multicast
  267. <5>[ 1.340576] Key type dns_resolver registered
  268. <6>[ 1.341278] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  269. <4>[ 1.345855] mmc1: card claims to support voltages below the defined range. These will be ignored.
  270. <4>[ 1.358001] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
  271. <6>[ 1.360412] mmc1: new SDIO card at address 0001
  272. <4>[ 1.367553] sr_init: No PMIC hook to init smartreflex
  273. <6>[ 1.367919] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  274. <6>[ 1.368530] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  275. <6>[ 1.368865] SmartReflex Class3 initialized
  276. <6>[ 1.396728] clock: disabling unused clocks to save power
  277. <6>[ 1.484405] panel-nokia-dsi display0: pyrenees panel revision fe.91.96
  278. <6>[ 1.488464] ALSA for WL1273 on Nokia DFL61 init
  279. <3>[ 1.488922] Error: -517
  280. <6>[ 1.488983] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
  281. <6>[ 1.492431] ALSA for WL1273 on Nokia DFL61 init
  282. <3>[ 1.492675] Error: -517
  283. <6>[ 1.492828] platform dfl61audio-wl1273: Driver dfl61audio-wl1273 requests probe deferral
  284. <6>[ 1.493560] ALSA for WL1273 on Nokia DFL61 init
  285. <6>[ 1.496551] asoc: wl1273-fm <-> omap-mcbsp.4 mapping ok
  286. <6>[ 1.497283] ALSA device list:
  287. <6>[ 1.497283] #0: dfl61-twl4030
  288. <6>[ 1.497314] #1: dfl61-dac33
  289. <4>[ 1.498016] Warning: unable to open an initial console.
  290. <6>[ 1.502166] DFL61 WL1273 init done
  291. <4>[ 1.523132] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
  292. <6>[ 1.543579] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
  293. <6>[ 1.543762] VFS: Mounted root (ext4 filesystem) on device 179:1.
  294. <6>[ 1.553344] devtmpfs: mounted
  295. <6>[ 1.553985] Freeing init memory: 192K
  296. <30>[ 3.057525] systemd[1]: systemd 187 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP; other)
  297. <6>[ 3.586517] NET: Registered protocol family 10
  298. <30>[ 3.598999] systemd[1]: Inserted module 'ipv6'
  299. <30>[ 3.601776] systemd[1]: No hostname configured.
  300. <30>[ 3.602325] systemd[1]: Set hostname to <localhost>.
  301. <30>[ 3.856506] systemd[1]: [/lib/systemd/system/boardname.service:10] Unknown lvalue 'ConditionFileNotEmpty' in section 'Unit'. Ignoring.
  302. <28>[ 4.273162] systemd[1]: Cannot add dependency job for unit serial-getty@getty.service, ignoring: Unit serial-getty@getty.service failed to load: No such file or directory. See system logs and 'systemctl status serial-getty@getty.service' for details.
  303. <27>[ 4.623992] systemd-readahead[87]: Failed to mark /: Invalid argument
  304. <30>[ 4.843933] systemd-udevd[90]: starting version 187
  305. <46>[ 4.900482] systemd-journald[92]: Fixed max_use=20.0M max_size=2.5M min_size=64.0K keep_free=24.7M
  306. <46>[ 4.901306] systemd-journald[92]: Reserving 4551 entries in hash table.
  307. <46>[ 4.904602] systemd-journald[92]: Vacuuming...
  308. <6>[ 5.283416] SGX clock rate 195 MHz
  309. <5>[ 5.958892] CMT driver
  310. <6>[ 6.329681] input: SPI vibrator as /devices/platform/omap2_mcspi.2/spi_master/spi2/input4
  311. <6>[ 6.688964] OMAP SSI
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!