API tools faq
paste
Advertisement
Guest User

/etc/hylafax/log/c000000066

a guest
Dec 10th, 2010
442
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Lisp 9.91 KB | None | 0 0
raw download clone embed print report
  1. Дек 10 13:16:47.41: [12621]: SESSION BEGIN 000000066 78432765000
  2. Дек 10 13:16:47.41: [12621]: HylaFAX (tm) Version 4.3.9
  3. Дек 10 13:16:47.41: [12621]: SEND FAX: JOB 11 DEST 2765000 COMMID 000000066 DEVICE '/dev/ttyIAX1' FROM 'Asterisk VoIP PBX <asterisk@pbx.akos-kia.local>' USER asterisk
  4. Дек 10 13:16:47.41: [12621]: STATE CHANGE: RUNNING -> SENDING
  5. Дек 10 13:16:47.41: [12621]: <-- [12:AT+FCLASS=1\r]
  6. Дек 10 13:16:47.41: [12621]: --> [2:OK]
  7. Дек 10 13:16:47.41: [12621]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
  8. Дек 10 13:16:47.41: [12621]: DIAL 2765000
  9. Дек 10 13:16:47.41: [12621]: <-- [12:ATDT2765000\r]
  10. Дек 10 13:17:08.27: [12621]: --> [7:CONNECT]
  11. Дек 10 13:17:09.47: [12621]: --> HDLC<13:FF C0 04 B5 00 6C 20 00 00 00 00 37 96>
  12. Дек 10 13:17:09.47: [12621]: --> [2:OK]
  13. Дек 10 13:17:09.47: [12621]: REMOTE NSF "AD 00 36 04 00 00 00 00"
  14. Дек 10 13:17:09.47: [12621]: NSF remote fax equipment: HP
  15. Дек 10 13:17:09.47: [12621]: <-- [9:AT+FRH=3\r]
  16. Дек 10 13:17:10.16: [12621]: --> [7:CONNECT]
  17. Дек 10 13:17:10.17: [12621]: --> HDLC<25:FF C0 02 0C 4C 4C 4C 4C 9C 4C CC 2C 1C EC D4 04 04 04 04 04 04 04 04 ED 2C>
  18. Дек 10 13:17:10.17: [12621]: --> [2:OK]
  19. Дек 10 13:17:10.17: [12621]: REMOTE CSI "+78432922220"
  20. Дек 10 13:17:10.17: [12621]: <-- [9:AT+FRH=3\r]
  21. Дек 10 13:17:10.61: [12621]: --> [7:CONNECT]
  22. Дек 10 13:17:10.61: [12621]: --> HDLC<15:FF C8 01 04 77 1F 23 01 49 01 01 01 00 1D 4B>
  23. Дек 10 13:17:10.65: [12621]: --> [2:OK]
  24. Дек 10 13:17:10.65: [12621]: REMOTE best rate 33600 bit/s
  25. Дек 10 13:17:10.65: [12621]: REMOTE max A4 page width (215 mm)
  26. Дек 10 13:17:10.65: [12621]: REMOTE max unlimited page length
  27. Дек 10 13:17:10.65: [12621]: REMOTE best vres 300 x 300 dpi
  28. Дек 10 13:17:10.65: [12621]: REMOTE format support: MH, MR, MMR
  29. Дек 10 13:17:10.65: [12621]: REMOTE supports T.30 Annex A, 256-byte ECM
  30. Дек 10 13:17:10.65: [12621]: REMOTE best 0 ms/scanline
  31. Дек 10 13:17:10.65: [12621]: USE 14400 bit/s
  32. Дек 10 13:17:10.65: [12621]: USE error correction mode
  33. Дек 10 13:17:10.65: [12621]: SEND file "docq/doc11.pdf;c1"
  34. Дек 10 13:17:10.65: [12621]: USE A4 page width (215 mm)
  35. Дек 10 13:17:10.65: [12621]: USE unlimited page length
  36. Дек 10 13:17:10.65: [12621]: USE 7.7 line/mm
  37. Дек 10 13:17:10.65: [12621]: USE 2-D MMR
  38. Дек 10 13:17:10.65: [12621]: USE 0 ms/scanline
  39. Дек 10 13:17:10.65: [12621]: SEND training at v.17 14400 bit/s
  40. Дек 10 13:17:10.65: [12621]: <-- [9:AT+FRS=7\r]
  41. Дек 10 13:17:10.71: [12621]: --> [2:OK]
  42. Дек 10 13:17:10.71: [12621]: <-- [9:AT+FTH=3\r]
  43. Дек 10 13:17:10.73: [12621]: --> [7:CONNECT]
  44. Дек 10 13:17:10.73: [12621]: <-- HDLC<23:FF C0 C2 C2 F2 D2 82 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
  45. Дек 10 13:17:10.73: [12621]: <-- data [23]
  46. Дек 10 13:17:10.73: [12621]: <-- data [2]
  47. Дек 10 13:17:12.30: [12621]: --> [7:CONNECT]
  48. Дек 10 13:17:12.30: [12621]: <-- HDLC<7:FF C8 C1 00 46 1F 22>
  49. Дек 10 13:17:12.30: [12621]: <-- data [7]
  50. Дек 10 13:17:12.30: [12621]: <-- data [2]
  51. Дек 10 13:17:12.71: [12621]: --> [2:OK]
  52. Дек 10 13:17:12.71: [12621]: <-- [9:AT+FTS=7\r]
  53. Дек 10 13:17:12.81: [12621]: --> [2:OK]
  54. Дек 10 13:17:12.81: [12621]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
  55. Дек 10 13:17:12.81: [12621]: <-- [11:AT+FTM=145\r]
  56. Дек 10 13:17:12.83: [12621]: --> [7:CONNECT]
  57. Дек 10 13:17:12.83: [12621]: DELAY 400 ms
  58. Дек 10 13:17:13.23: [12621]: <-- data [1024]
  59. Дек 10 13:17:13.23: [12621]: <-- data [1024]
  60. Дек 10 13:17:13.23: [12621]: <-- data [652]
  61. Дек 10 13:17:13.23: [12621]: <-- data [2]
  62. Дек 10 13:17:15.84: [12621]: --> [2:OK]
  63. Дек 10 13:17:15.84: [12621]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
  64. Дек 10 13:17:15.84: [12621]: <-- [9:AT+FRH=3\r]
  65. Дек 10 13:17:16.28: [12621]: --> [7:CONNECT]
  66. Дек 10 13:17:17.60: [12621]: --> HDLC<13:FF C0 04 B5 00 6C 20 00 00 00 00 37 96>
  67. Дек 10 13:17:17.60: [12621]: --> [2:OK]
  68. Дек 10 13:17:17.60: [12621]: REMOTE NSF "AD 00 36 04 00 00 00 00"
  69. Дек 10 13:17:17.60: [12621]: NSF remote fax equipment: HP
  70. Дек 10 13:17:17.60: [12621]: <-- [9:AT+FRH=3\r]
  71. Дек 10 13:17:18.31: [12621]: --> [7:CONNECT]
  72. Дек 10 13:17:18.31: [12621]: --> HDLC<25:FF C0 02 0C 4C 4C 4C 4C 9C 4C CC 2C 1C EC D4 04 04 04 04 04 04 04 04 ED 2C>
  73. Дек 10 13:17:18.31: [12621]: --> [2:OK]
  74. Дек 10 13:17:18.31: [12621]: REMOTE CSI "+78432922220"
  75. Дек 10 13:17:18.31: [12621]: <-- [9:AT+FRH=3\r]
  76. Дек 10 13:17:18.74: [12621]: --> [7:CONNECT]
  77. Дек 10 13:17:18.74: [12621]: --> HDLC<15:FF C8 01 04 77 1F 23 01 49 01 01 01 00 1D 4B>
  78. Дек 10 13:17:18.78: [12621]: --> [2:OK]
  79. Дек 10 13:17:18.78: [12621]: SEND training at v.17 14400 bit/s
  80. Дек 10 13:17:18.78: [12621]: <-- [9:AT+FRS=7\r]
  81. Дек 10 13:17:18.84: [12621]: --> [2:OK]
  82. Дек 10 13:17:18.84: [12621]: <-- [9:AT+FTH=3\r]
  83. Дек 10 13:17:18.86: [12621]: --> [7:CONNECT]
  84. Дек 10 13:17:18.86: [12621]: <-- HDLC<23:FF C0 C2 C2 F2 D2 82 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
  85. Дек 10 13:17:18.86: [12621]: <-- data [23]
  86. Дек 10 13:17:18.86: [12621]: <-- data [2]
  87. Дек 10 13:17:20.42: [12621]: --> [7:CONNECT]
  88. Дек 10 13:17:20.42: [12621]: <-- HDLC<7:FF C8 C1 00 46 1F 22>
  89. Дек 10 13:17:20.42: [12621]: <-- data [7]
  90. Дек 10 13:17:20.42: [12621]: <-- data [2]
  91. Дек 10 13:17:20.83: [12621]: --> [2:OK]
  92. Дек 10 13:17:20.83: [12621]: <-- [9:AT+FTS=7\r]
  93. Дек 10 13:17:20.93: [12621]: --> [2:OK]
  94. Дек 10 13:17:20.93: [12621]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
  95. Дек 10 13:17:20.93: [12621]: <-- [11:AT+FTM=145\r]
  96. Дек 10 13:17:20.95: [12621]: --> [7:CONNECT]
  97. Дек 10 13:17:20.95: [12621]: DELAY 400 ms
  98. Дек 10 13:17:21.35: [12621]: <-- data [1024]
  99. Дек 10 13:17:21.35: [12621]: <-- data [1024]
  100. Дек 10 13:17:21.35: [12621]: <-- data [652]
  101. Дек 10 13:17:21.35: [12621]: <-- data [2]
  102. Дек 10 13:17:23.95: [12621]: --> [2:OK]
  103. Дек 10 13:17:23.95: [12621]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
  104. Дек 10 13:17:23.95: [12621]: <-- [9:AT+FRH=3\r]
  105. Дек 10 13:17:26.81: [12621]: --> [7:CONNECT]
  106. Дек 10 13:17:28.11: [12621]: --> HDLC<13:FF C0 04 B5 00 6C 20 00 00 00 00 37 96>
  107. Дек 10 13:17:28.11: [12621]: --> [2:OK]
  108. Дек 10 13:17:28.11: [12621]: REMOTE NSF "AD 00 36 04 00 00 00 00"
  109. Дек 10 13:17:28.11: [12621]: NSF remote fax equipment: HP
  110. Дек 10 13:17:28.11: [12621]: <-- [9:AT+FRH=3\r]
  111. Дек 10 13:17:28.80: [12621]: --> [7:CONNECT]
  112. Дек 10 13:17:28.80: [12621]: --> HDLC<25:FF C0 02 0C 4C 4C 4C 4C 9C 4C CC 2C 1C EC D4 04 04 04 04 04 04 04 04 ED 2C>
  113. Дек 10 13:17:28.80: [12621]: --> [2:OK]
  114. Дек 10 13:17:28.80: [12621]: REMOTE CSI "+78432922220"
  115. Дек 10 13:17:28.80: [12621]: <-- [9:AT+FRH=3\r]
  116. Дек 10 13:17:29.24: [12621]: --> [7:CONNECT]
  117. Дек 10 13:17:29.24: [12621]: --> HDLC<15:FF C8 01 04 77 1F 23 01 49 01 01 01 00 1D 4B>
  118. Дек 10 13:17:29.28: [12621]: --> [2:OK]
  119. Дек 10 13:17:29.28: [12621]: SEND training at v.17 14400 bit/s
  120. Дек 10 13:17:29.28: [12621]: <-- [9:AT+FRS=7\r]
  121. Дек 10 13:17:29.37: [12621]: --> [2:OK]
  122. Дек 10 13:17:29.37: [12621]: <-- [9:AT+FTH=3\r]
  123. Дек 10 13:17:29.39: [12621]: --> [7:CONNECT]
  124. Дек 10 13:17:29.39: [12621]: <-- HDLC<23:FF C0 C2 C2 F2 D2 82 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
  125. Дек 10 13:17:29.39: [12621]: <-- data [23]
  126. Дек 10 13:17:29.39: [12621]: <-- data [2]
  127. Дек 10 13:17:30.95: [12621]: --> [7:CONNECT]
  128. Дек 10 13:17:30.95: [12621]: <-- HDLC<7:FF C8 C1 00 46 1F 22>
  129. Дек 10 13:17:30.95: [12621]: <-- data [7]
  130. Дек 10 13:17:30.95: [12621]: <-- data [2]
  131. Дек 10 13:17:31.35: [12621]: --> [2:OK]
  132. Дек 10 13:17:31.35: [12621]: <-- [9:AT+FTS=7\r]
  133. Дек 10 13:17:31.45: [12621]: --> [2:OK]
  134. Дек 10 13:17:31.45: [12621]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
  135. Дек 10 13:17:31.45: [12621]: <-- [11:AT+FTM=145\r]
  136. Дек 10 13:17:31.47: [12621]: --> [7:CONNECT]
  137. Дек 10 13:17:31.47: [12621]: DELAY 400 ms
  138. Дек 10 13:17:31.87: [12621]: <-- data [1024]
  139. Дек 10 13:17:31.87: [12621]: <-- data [1024]
  140. Дек 10 13:17:31.87: [12621]: <-- data [652]
  141. Дек 10 13:17:31.87: [12621]: <-- data [2]
  142. Дек 10 13:17:34.47: [12621]: --> [2:OK]
  143. Дек 10 13:17:34.47: [12621]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
  144. Дек 10 13:17:34.47: [12621]: <-- [9:AT+FRH=3\r]
  145. Дек 10 13:17:34.92: [12621]: --> [7:CONNECT]
  146. Дек 10 13:17:36.23: [12621]: --> HDLC<13:FF C0 04 B5 00 6C 20 00 00 00 00 37 96>
  147. Дек 10 13:17:36.23: [12621]: --> [2:OK]
  148. Дек 10 13:17:36.23: [12621]: REMOTE NSF "AD 00 36 04 00 00 00 00"
  149. Дек 10 13:17:36.23: [12621]: NSF remote fax equipment: HP
  150. Дек 10 13:17:36.23: [12621]: <-- [9:AT+FRH=3\r]
  151. Дек 10 13:17:36.92: [12621]: --> [7:CONNECT]
  152. Дек 10 13:17:36.92: [12621]: --> HDLC<25:FF C0 02 0C 4C 4C 4C 4C 9C 4C CC 2C 1C EC D4 04 04 04 04 04 04 04 04 ED 2C>
  153. Дек 10 13:17:36.92: [12621]: --> [2:OK]
  154. Дек 10 13:17:36.92: [12621]: REMOTE CSI "+78432922220"
  155. Дек 10 13:17:36.92: [12621]: <-- [9:AT+FRH=3\r]
  156. Дек 10 13:17:37.37: [12621]: --> [7:CONNECT]
  157. Дек 10 13:17:37.37: [12621]: --> HDLC<15:FF C8 01 04 77 1F 23 01 49 01 01 01 00 1D 4B>
  158. Дек 10 13:17:37.41: [12621]: --> [2:OK]
  159. Дек 10 13:17:37.41: [12621]: DIS/DTC received 3 times; DCS not recognized
  160. Дек 10 13:17:37.41: [12621]: <-- [9:AT+FTH=3\r]
  161. Дек 10 13:17:37.43: [12621]: --> [7:CONNECT]
  162. Дек 10 13:17:37.43: [12621]: <-- HDLC<3:FF C8 DF>
  163. Дек 10 13:17:37.43: [12621]: <-- data [3]
  164. Дек 10 13:17:37.43: [12621]: <-- data [2]
  165. Дек 10 13:17:38.52: [12621]: --> [2:OK]
  166. Дек 10 13:17:38.52: [12621]: MODEM input buffering enabled
  167. Дек 10 13:17:38.52: [12621]: <-- [5:ATH0\r]
  168. Дек 10 13:17:38.64: [12621]: --> [2:OK]
  169. Дек 10 13:17:38.64: [12621]: MODEM set DTR OFF
  170. Дек 10 13:17:38.64: [12621]: MODEM set baud rate: 0 baud (flow control unchanged)
  171. Дек 10 13:17:38.64: [12621]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
  172. Дек 10 13:17:38.64: [12621]: SESSION END
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!