API tools faq
paste
chereda

Print out of dmesg

chereda
Jun 11th, 2011
290
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.43 KB | None | 0 0
raw download clone embed print report
  1. Initializing cgroup subsys cpuset
  2. Initializing cgroup subsys cpu
  3. Linux version 2.6.25-std-def-alt8.M41.1 ([email protected]) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt2)) #1 SMP Thu Sep 11 01:14:41 MSD 2008
  4. BIOS-provided physical RAM map:
  5. BIOS-e820: 0000000000000000 - 0000000000098c00 (usable)
  6. BIOS-e820: 0000000000098c00 - 00000000000a0000 (reserved)
  7. BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
  8. BIOS-e820: 0000000000100000 - 00000000bdda0000 (usable)
  9. BIOS-e820: 00000000bdda0000 - 00000000bddaf000 (ACPI data)
  10. BIOS-e820: 00000000bddaf000 - 00000000bdde0000 (ACPI NVS)
  11. BIOS-e820: 00000000bdde0000 - 00000000bde00000 (reserved)
  12. BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
  13. BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  14. BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
  15. BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
  16. Warning only 4GB will be used.
  17. Use a HIGHMEM64G enabled kernel.
  18. 3200MB HIGHMEM available.
  19. 896MB LOWMEM available.
  20. Scan SMP from c0000000 for 1024 bytes.
  21. Scan SMP from c009fc00 for 1024 bytes.
  22. Scan SMP from c00f0000 for 65536 bytes.
  23. found SMP MP-table at [c00ff780] 000ff780
  24. Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
  25. Zone PFN ranges:
  26. DMA 0 -> 4096
  27. Normal 4096 -> 229376
  28. HighMem 229376 -> 1048576
  29. Movable zone start PFN for each node
  30. early_node_map[1] active PFN ranges
  31. 0: 0 -> 1048576
  32. On node 0 totalpages: 1048576
  33. DMA zone: 32 pages used for memmap
  34. DMA zone: 0 pages reserved
  35. DMA zone: 4064 pages, LIFO batch:0
  36. Normal zone: 1760 pages used for memmap
  37. Normal zone: 223520 pages, LIFO batch:31
  38. HighMem zone: 6400 pages used for memmap
  39. HighMem zone: 812800 pages, LIFO batch:31
  40. Movable zone: 0 pages used for memmap
  41. DMI 2.5 present.
  42. ACPI: RSDP 000F9180, 0024 (r2 122809)
  43. ACPI: XSDT BDDA0100, 0084 (r1 _ASUS_ Notebook 20091228 MSFT 97)
  44. ACPI: FACP BDDA0290, 00F4 (r3 122809 FACP0952 20091228 MSFT 97)
  45. ACPI: DSDT BDDA0680, D0BF (r1 UL30A UL30A100 100 INTL 20051117)
  46. ACPI: FACS BDDAF000, 0040
  47. ACPI: APIC BDDA0390, 005C (r1 122809 APIC0952 20091228 MSFT 97)
  48. ACPI: MCFG BDDA0430, 003C (r1 122809 OEMMCFG 20091228 MSFT 97)
  49. ACPI: SLIC BDDA0470, 0176 (r1 _ASUS_ Notebook 20091228 MSFT 97)
  50. ACPI: ECDT BDDA0620, 0054 (r1 122809 OEMECDT 20091228 MSFT 97)
  51. ACPI: DBGP BDDA03F0, 0034 (r1 122809 DBGP0952 20091228 MSFT 97)
  52. ACPI: BOOT BDDA05F0, 0028 (r1 122809 BOOT0952 20091228 MSFT 97)
  53. ACPI: OEMB BDDAF040, 0071 (r1 122809 OEMB0952 20091228 MSFT 97)
  54. ACPI: HPET BDDAD740, 0038 (r1 122809 OEMHPET 20091228 MSFT 97)
  55. ACPI: GSCI BDDAF0C0, 2024 (r1 122809 GMCHSCI 20091228 MSFT 97)
  56. ACPI: ATKG BDDB12F0, 8024 (r1 _ASUS_ OEMATKG 20091228 MSFT 97)
  57. ACPI: SSDT BDDB9D80, 04F0 (r1 PmRef CpuPm 3000 INTL 20051117)
  58. ACPI: PM-Timer IO Port: 0x808
  59. ACPI: Local APIC address 0xfee00000
  60. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  61. Processor #0 7:7 APIC version 20
  62. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  63. Processor #1 7:7 APIC version 20
  64. ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  65. IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  66. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  67. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  68. ACPI: IRQ0 used by override.
  69. ACPI: IRQ2 used by override.
  70. ACPI: IRQ9 used by override.
  71. Enabling APIC mode: Flat. Using 1 I/O APICs
  72. ACPI: HPET id: 0x8086a301 base: 0xfed00000
  73. Using ACPI (MADT) for SMP configuration information
  74. Allocating PCI resources starting at c0000000 (gap: bde00000:40f20000)
  75. PM: Registered nosave memory: 0000000000098000 - 0000000000099000
  76. PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
  77. PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
  78. PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
  79. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
  80. Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=33acf563-a7db-4c89-813b-6c68039e66e9 resume=/dev/sda8 panic=30 splash=silent
  81. bootsplash: silent mode.
  82. mapped APIC to ffffb000 (fee00000)
  83. mapped IOAPIC to ffffa000 (fec00000)
  84. Enabling fast FPU save and restore... done.
  85. Enabling unmasked SIMD FPU exception support... done.
  86. Initializing CPU#0
  87. PID hash table entries: 4096 (order: 12, 16384 bytes)
  88. Detected 1236.153 MHz processor.
  89. Console: colour dummy device 80x25
  90. console [tty0] enabled
  91. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  92. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  93. Memory: 3070600k/4194304k available (2298k kernel code, 38712k reserved, 804k data, 392k init, 2193024k highmem)
  94. virtual kernel memory layout:
  95. fixmap : 0xffe13000 - 0xfffff000 (1968 kB)
  96. pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  97. vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
  98. lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
  99. .init : 0xc050f000 - 0xc0571000 ( 392 kB)
  100. .data : 0xc043ea0e - 0xc0507ba0 ( 804 kB)
  101. .text : 0xc0200000 - 0xc043ea0e (2298 kB)
  102. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  103. CPA: page pool initialized 1 of 1 pages preallocated
  104. hpet clockevent registered
  105. Calibrating delay using timer specific routine.. 2475.32 BogoMIPS (lpj=4950654)
  106. Security Framework initialized
  107. SELinux: Disabled at boot.
  108. Capability LSM initialized
  109. Mount-cache hash table entries: 512
  110. Initializing cgroup subsys ns
  111. Initializing cgroup subsys cpuacct
  112. CPU: L1 I cache: 32K, L1 D cache: 32K
  113. CPU: L2 cache: 1024K
  114. CPU: Physical Processor ID: 0
  115. CPU: Processor Core ID: 0
  116. Intel machine check architecture supported.
  117. Intel machine check reporting enabled on CPU#0.
  118. using mwait in idle threads.
  119. Compat vDSO mapped to ffffe000.
  120. Checking 'hlt' instruction... OK.
  121. ACPI: Core revision 20070126
  122. CPU0: Intel Genuine Intel(R) CPU U2300 @ 1.20GHz stepping 0a
  123. Booting processor 1/1 ip 4000
  124. Initializing CPU#1
  125. Calibrating delay using timer specific routine.. 2472.07 BogoMIPS (lpj=4944147)
  126. CPU: L1 I cache: 32K, L1 D cache: 32K
  127. CPU: L2 cache: 1024K
  128. CPU: Physical Processor ID: 0
  129. CPU: Processor Core ID: 1
  130. Intel machine check architecture supported.
  131. Intel machine check reporting enabled on CPU#1.
  132. CPU1: Intel Genuine Intel(R) CPU U2300 @ 1.20GHz stepping 0a
  133. Total of 2 processors activated (4947.40 BogoMIPS).
  134. ENABLING IO-APIC IRQs
  135. ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  136. checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  137. Brought up 2 CPUs
  138. sizeof(vma)=84 bytes
  139. sizeof(page)=32 bytes
  140. sizeof(inode)=340 bytes
  141. sizeof(dentry)=132 bytes
  142. sizeof(ext3inode)=492 bytes
  143. sizeof(buffer_head)=56 bytes
  144. sizeof(skbuff)=180 bytes
  145. sizeof(task_struct)=1792 bytes
  146. CPU0 attaching sched-domain:
  147. domain 0: span 00000003
  148. groups: 00000001 00000002
  149. CPU1 attaching sched-domain:
  150. domain 0: span 00000003
  151. groups: 00000002 00000001
  152. net_namespace: 548 bytes
  153. Booting paravirtualized kernel on bare hardware
  154. NET: Registered protocol family 16
  155. EISA bus registered
  156. ACPI: bus type pci registered
  157. PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
  158. PCI: Not using MMCONFIG.
  159. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
  160. PCI: Using configuration type 1
  161. Setting up standard PCI resources
  162. ACPI: EC: EC description table is found, configuring boot EC
  163. ACPI: BIOS _OSI(Linux) query ignored
  164. ACPI: DMI System Vendor: ASUSTeK Computer Inc.
  165. ACPI: DMI Product Name: UL30A
  166. ACPI: DMI Product Version: 1.0
  167. ACPI: DMI Board Name: UL30A
  168. ACPI: DMI BIOS Vendor: American Megatrends Inc.
  169. ACPI: DMI BIOS Date: 12/28/2009
  170. ACPI: Please send DMI info above to [email protected]
  171. ACPI: If "acpi_osi=Linux" works better, please notify [email protected]
  172. ACPI: Interpreter enabled
  173. ACPI: (supports S0 S1 S3 S4 S5)
  174. ACPI: Using IOAPIC for interrupt routing
  175. ACPI: Error attaching device data
  176. ACPI: Error attaching device data
  177. ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
  178. ACPI: EC: driver started in poll mode
  179. ACPI: PCI Root Bridge [PCI0] (0000:00)
  180. PCI: Transparent bridge - 0000:00:1e.0
  181. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  182. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
  183. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  184. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
  185. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
  186. ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
  187. ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
  188. ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
  189. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
  190. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
  191. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
  192. ACPI Warning (tbutils-0217): Incorrect checksum in table [ATKG] - 7E, should be FE [20070126]
  193. Linux Plug and Play Support v0.97 (c) Adam Belay
  194. pnp: PnP ACPI init
  195. ACPI: bus type pnp registered
  196. pnp: PnP ACPI: found 15 devices
  197. ACPI: ACPI bus type pnp unregistered
  198. PnPBIOS: Disabled by ACPI PNP
  199. PCI: Using ACPI for IRQ routing
  200. PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
  201. NetLabel: Initializing
  202. NetLabel: domain hash size = 128
  203. NetLabel: protocols = UNLABELED CIPSOv4
  204. NetLabel: unlabeled traffic allowed by default
  205. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  206. hpet0: 4 64-bit timers, 14318180 Hz
  207. ACPI: RTC can wake from S4
  208. system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
  209. system 00:08: ioport range 0x4d0-0x4d1 has been reserved
  210. system 00:08: ioport range 0x800-0x87f has been reserved
  211. system 00:08: ioport range 0x400-0x41f has been reserved
  212. system 00:08: ioport range 0x500-0x57f has been reserved
  213. system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
  214. system 00:08: iomem range 0xfed20000-0xfed3ffff could not be reserved
  215. system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
  216. system 00:08: iomem range 0xfed90000-0xfed90fff has been reserved
  217. system 00:08: iomem range 0xfed91000-0xfed91fff has been reserved
  218. system 00:08: iomem range 0xfed92000-0xfed92fff has been reserved
  219. system 00:08: iomem range 0xfed93000-0xfed93fff has been reserved
  220. system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
  221. system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
  222. system 00:0a: iomem range 0xffa00000-0xffbfffff could not be reserved
  223. system 00:0a: iomem range 0xffe00000-0xffffffff could not be reserved
  224. system 00:0b: iomem range 0xffc00000-0xffdfffff could not be reserved
  225. system 00:0c: ioport range 0x250-0x253 has been reserved
  226. system 00:0c: ioport range 0x256-0x25f has been reserved
  227. system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
  228. system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
  229. system 00:0c: iomem range 0xfec18000-0xfec1ffff has been reserved
  230. system 00:0c: iomem range 0xfec38000-0xfec3ffff has been reserved
  231. system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
  232. system 00:0e: iomem range 0x0-0x9ffff could not be reserved
  233. system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
  234. system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
  235. system 00:0e: iomem range 0x100000-0xbddfffff could not be reserved
  236. system 00:0e: iomem range 0x0-0x0 could not be reserved
  237. PCI: Bridge: 0000:00:1c.0
  238. IO window: disabled.
  239. MEM window: disabled.
  240. PREFETCH window: disabled.
  241. PCI: Bridge: 0000:00:1c.1
  242. IO window: disabled.
  243. MEM window: 0xfea00000-0xfeafffff
  244. PREFETCH window: disabled.
  245. PCI: Bridge: 0000:00:1c.5
  246. IO window: e000-efff
  247. MEM window: 0xfeb00000-0xfebfffff
  248. PREFETCH window: disabled.
  249. PCI: Bridge: 0000:00:1e.0
  250. IO window: disabled.
  251. MEM window: disabled.
  252. PREFETCH window: disabled.
  253. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
  254. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  255. ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
  256. PCI: Setting latency timer of device 0000:00:1c.1 to 64
  257. ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
  258. PCI: Setting latency timer of device 0000:00:1c.5 to 64
  259. PCI: Setting latency timer of device 0000:00:1e.0 to 64
  260. NET: Registered protocol family 2
  261. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  262. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  263. TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  264. TCP: Hash tables configured (established 131072 bind 65536)
  265. TCP reno registered
  266. checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
  267. it is
  268. Switched to high resolution mode on CPU 0
  269. Freeing initrd memory: 883k freed
  270. Simple Boot Flag at 0x51 set to 0x1
  271. audit: initializing netlink socket (disabled)
  272. type=2000 audit(1307835022.552:1): initialized
  273. highmem bounce pool size: 64 pages
  274. Total HugeTLB memory allocated, 0
  275. VFS: Disk quotas dquot_6.5.1
  276. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  277. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  278. io scheduler noop registered
  279. io scheduler anticipatory registered
  280. io scheduler deadline registered
  281. io scheduler cfq registered (default)
  282. pci 0000:00:02.0: Boot video device
  283. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  284. assign_interrupt_mode Found MSI capability
  285. Allocate Port Service[0000:00:1c.0:pcie00]
  286. PCI: Setting latency timer of device 0000:00:1c.1 to 64
  287. assign_interrupt_mode Found MSI capability
  288. Allocate Port Service[0000:00:1c.1:pcie00]
  289. PCI: Setting latency timer of device 0000:00:1c.5 to 64
  290. assign_interrupt_mode Found MSI capability
  291. Allocate Port Service[0000:00:1c.5:pcie00]
  292. Allocate Port Service[0000:00:1c.5:pcie02]
  293. vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 32704k
  294. vesafb: mode is 800x600x16, linelength=1600, pages=33
  295. vesafb: scrolling: redraw
  296. vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  297. bootsplash 3.1.6-2004/03/31: looking for picture...
  298. bootsplash: silentjpeg size 133202 bytes
  299. bootsplash: ...found (800x600, 12886 bytes, v3).
  300. Console: switching to colour frame buffer device 97x34
  301. fb0: VESA VGA frame buffer device
  302. isapnp: Scanning for PnP cards...
  303. isapnp: No Plug & Play device found
  304. hpet_resources: 0xfed00000 is busy
  305. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  306. brd: module loaded
  307. input: Macintosh mouse button emulation as /devices/virtual/input/input0
  308. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  309. i8042.c: Detected active multiplexing controller, rev 1.1.
  310. serio: i8042 KBD port at 0x60,0x64 irq 1
  311. serio: i8042 AUX0 port at 0x60,0x64 irq 12
  312. serio: i8042 AUX1 port at 0x60,0x64 irq 12
  313. serio: i8042 AUX2 port at 0x60,0x64 irq 12
  314. serio: i8042 AUX3 port at 0x60,0x64 irq 12
  315. mice: PS/2 mouse device common for all mice
  316. EISA: Probing bus 0 at eisa.0
  317. cpuidle: using governor ladder
  318. cpuidle: using governor menu
  319. TCP bic registered
  320. NET: Registered protocol family 1
  321. Using IPI No-Shortcut mode
  322. registered taskstats version 1
  323. Freeing unused kernel memory: 392k freed
  324. Write protecting the kernel read-only data: 616k
  325. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  326. Executing init=/init
  327. SCSI subsystem initialized
  328. Driver 'sd' needs updating - please use bus_type methods
  329. No dock devices found.
  330. libata version 3.00 loaded.
  331. ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
  332. PCI: Setting latency timer of device 0000:00:1f.2 to 64
  333. ACPI: PCI interrupt for device 0000:00:1f.2 disabled
  334. ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
  335. PCI: Setting latency timer of device 0000:00:1f.5 to 64
  336. ACPI: PCI interrupt for device 0000:00:1f.5 disabled
  337. ata_piix 0000:00:1f.2: version 2.12
  338. ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
  339. ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
  340. PCI: Setting latency timer of device 0000:00:1f.2 to 64
  341. scsi0 : ata_piix
  342. scsi1 : ata_piix
  343. ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
  344. ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
  345. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  346. ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133
  347. ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
  348. ata1.00: configured for UDMA/133
  349. ata2: SATA link down (SStatus 0 SControl 0)
  350. scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0002 PQ: 0 ANSI: 5
  351. sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
  352. sd 0:0:0:0: [sda] Write Protect is off
  353. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  354. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  355. sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
  356. sd 0:0:0:0: [sda] Write Protect is off
  357. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  358. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  359. sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
  360. sd 0:0:0:0: [sda] Attached SCSI disk
  361. ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
  362. ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
  363. ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
  364. PCI: Setting latency timer of device 0000:00:1f.5 to 64
  365. scsi2 : ata_piix
  366. scsi3 : ata_piix
  367. ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
  368. ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
  369. usbcore: registered new interface driver usbfs
  370. usbcore: registered new interface driver hub
  371. usbcore: registered new device driver usb
  372. usbcore: registered new interface driver libusual
  373. Initializing USB Mass Storage driver...
  374. usbcore: registered new interface driver usb-storage
  375. USB Mass Storage support registered.
  376. ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
  377. PCI: Setting latency timer of device 0000:00:1a.7 to 64
  378. ehci_hcd 0000:00:1a.7: EHCI Host Controller
  379. ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  380. ehci_hcd 0000:00:1a.7: debug port 1
  381. PCI: cache line size of 32 is not supported by device 0000:00:1a.7
  382. ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
  383. ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  384. usb usb1: configuration #1 chosen from 1 choice
  385. hub 1-0:1.0: USB hub found
  386. hub 1-0:1.0: 6 ports detected
  387. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  388. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  389. usb usb1: Product: EHCI Host Controller
  390. usb usb1: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
  391. usb usb1: SerialNumber: 0000:00:1a.7
  392. ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
  393. PCI: Setting latency timer of device 0000:00:1d.7 to 64
  394. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  395. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  396. ehci_hcd 0000:00:1d.7: debug port 1
  397. PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  398. ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fb800
  399. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  400. usb usb2: configuration #1 chosen from 1 choice
  401. hub 2-0:1.0: USB hub found
  402. hub 2-0:1.0: 6 ports detected
  403. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  404. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  405. usb usb2: Product: EHCI Host Controller
  406. usb usb2: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd
  407. usb usb2: SerialNumber: 0000:00:1d.7
  408. hub 1-0:1.0: unable to enumerate USB device on port 1
  409. usb 1-3: new high speed USB device using ehci_hcd and address 3
  410. usb 1-3: configuration #1 chosen from 1 choice
  411. usb 1-3: New USB device found, idVendor=064e, idProduct=a136
  412. usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
  413. usb 1-3: Product: USB 2.0 UVC 0.3M Webcam
  414. usb 1-3: Manufacturer: SuYin
  415. usb 1-3: SerialNumber: CN031B-S233-MI01-VS-R01.01.01
  416. usb 2-2: new high speed USB device using ehci_hcd and address 2
  417. usb 2-2: configuration #1 chosen from 1 choice
  418. scsi4 : SCSI emulation for USB Mass Storage devices
  419. usb-storage: device found at 2
  420. usb-storage: waiting for device to settle before scanning
  421. usb 2-2: New USB device found, idVendor=0930, idProduct=6545
  422. usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  423. usb 2-2: Product: DataTraveler 2.0
  424. usb 2-2: Manufacturer: Kingston
  425. usb 2-2: SerialNumber: 001D92A85EDCB910A33003AD
  426. hub 2-0:1.0: unable to enumerate USB device on port 3
  427. usbcore: registered new interface driver hiddev
  428. usbcore: registered new interface driver usbhid
  429. drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  430. USB Universal Host Controller Interface driver v3.0
  431. ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
  432. PCI: Setting latency timer of device 0000:00:1a.0 to 64
  433. uhci_hcd 0000:00:1a.0: UHCI Host Controller
  434. uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  435. uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
  436. usb usb3: configuration #1 chosen from 1 choice
  437. hub 3-0:1.0: USB hub found
  438. hub 3-0:1.0: 2 ports detected
  439. usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  440. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  441. usb usb3: Product: UHCI Host Controller
  442. usb usb3: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
  443. usb usb3: SerialNumber: 0000:00:1a.0
  444. ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
  445. PCI: Setting latency timer of device 0000:00:1a.1 to 64
  446. uhci_hcd 0000:00:1a.1: UHCI Host Controller
  447. uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  448. uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
  449. usb usb4: configuration #1 chosen from 1 choice
  450. hub 4-0:1.0: USB hub found
  451. hub 4-0:1.0: 2 ports detected
  452. usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  453. usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  454. usb usb4: Product: UHCI Host Controller
  455. usb usb4: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
  456. usb usb4: SerialNumber: 0000:00:1a.1
  457. ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
  458. PCI: Setting latency timer of device 0000:00:1a.2 to 64
  459. uhci_hcd 0000:00:1a.2: UHCI Host Controller
  460. uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
  461. uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
  462. usb usb5: configuration #1 chosen from 1 choice
  463. hub 5-0:1.0: USB hub found
  464. hub 5-0:1.0: 2 ports detected
  465. usb 3-1: new full speed USB device using uhci_hcd and address 2
  466. usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  467. usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  468. usb usb5: Product: UHCI Host Controller
  469. usb usb5: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
  470. usb usb5: SerialNumber: 0000:00:1a.2
  471. ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
  472. PCI: Setting latency timer of device 0000:00:1d.0 to 64
  473. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  474. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
  475. uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
  476. usb usb6: configuration #1 chosen from 1 choice
  477. hub 6-0:1.0: USB hub found
  478. hub 6-0:1.0: 2 ports detected
  479. usb 3-1: configuration #1 chosen from 1 choice
  480. usb 3-1: New USB device found, idVendor=0b05, idProduct=1751
  481. usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  482. usb 3-1: Product: BT-253
  483. usb 3-1: Manufacturer: Broadcom Corp
  484. usb 3-1: SerialNumber: 0025D3AE4429
  485. usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  486. usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  487. usb usb6: Product: UHCI Host Controller
  488. usb usb6: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
  489. usb usb6: SerialNumber: 0000:00:1d.0
  490. ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
  491. PCI: Setting latency timer of device 0000:00:1d.1 to 64
  492. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  493. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
  494. uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
  495. usb usb7: configuration #1 chosen from 1 choice
  496. hub 7-0:1.0: USB hub found
  497. hub 7-0:1.0: 2 ports detected
  498. scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
  499. sd 4:0:0:0: [sdb] 31375360 512-byte hardware sectors (16064 MB)
  500. sd 4:0:0:0: [sdb] Write Protect is off
  501. sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
  502. sd 4:0:0:0: [sdb] Assuming drive cache: write through
  503. usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  504. usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  505. usb usb7: Product: UHCI Host Controller
  506. usb usb7: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
  507. usb usb7: SerialNumber: 0000:00:1d.1
  508. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
  509. PCI: Setting latency timer of device 0000:00:1d.2 to 64
  510. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  511. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
  512. uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
  513. usb usb8: configuration #1 chosen from 1 choice
  514. hub 8-0:1.0: USB hub found
  515. hub 8-0:1.0: 2 ports detected
  516. usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
  517. usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  518. usb usb8: Product: UHCI Host Controller
  519. usb usb8: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd
  520. usb usb8: SerialNumber: 0000:00:1d.2
  521. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
  522. usb 7-1: new low speed USB device using uhci_hcd and address 2
  523. usb 7-1: configuration #1 chosen from 1 choice
  524. input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input2
  525. input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.1-1
  526. usb 7-1: New USB device found, idVendor=0458, idProduct=003a
  527. usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  528. usb 7-1: Product: Optical Mouse
  529. usb 7-1: Manufacturer: Genius
  530. sd 4:0:0:0: [sdb] 31375360 512-byte hardware sectors (16064 MB)
  531. sd 4:0:0:0: [sdb] Write Protect is off
  532. sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
  533. sd 4:0:0:0: [sdb] Assuming drive cache: write through
  534. sdb: sdb1
  535. sd 4:0:0:0: [sdb] Attached SCSI removable disk
  536. usb-storage: device scan complete
  537. PM: Starting manual resume from disk
  538. kjournald starting. Commit interval 5 seconds
  539. EXT3-fs: mounted filesystem with ordered data mode.
  540. input: PC Speaker as /devices/platform/pcspkr/input/input3
  541. Real Time Clock Driver v1.12ac
  542. sd 0:0:0:0: Attached scsi generic sg0 type 0
  543. sd 4:0:0:0: Attached scsi generic sg1 type 0
  544. Linux agpgart interface v0.103
  545. agpgart: Detected an Intel Intel Integrated Graphics Device Chipset.
  546. agpgart: Detected 32252K stolen memory.
  547. agpgart: AGP aperture is 256M @ 0xd0000000
  548. ACPI: SSDT BDDB93F0, 0182 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
  549. ACPI: SSDT BDDB9610, 0765 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
  550. Monitor-Mwait will be used to enter C-1 state
  551. Monitor-Mwait will be used to enter C-3 state
  552. ACPI: CPU0 (power states: C1[C1] C2[C3])
  553. ACPI: ACPI0007:00 is registered as cooling_device0
  554. ACPI: Processor [P001] (supports 8 throttling states)
  555. ACPI: SSDT BDDB9320, 00CC (r1 PmRef Cpu1Ist 3000 INTL 20051117)
  556. ACPI: SSDT BDDB9580, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
  557. ACPI: CPU1 (power states: C1[C1] C2[C3])
  558. ACPI: ACPI0007:01 is registered as cooling_device1
  559. ACPI: Processor [P002] (supports 8 throttling states)
  560. input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
  561. ACPI: Power Button (FF) [PWRF]
  562. input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
  563. ACPI: Sleep Button (CM) [SLPB]
  564. input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
  565. ACPI: Lid Switch [LID]
  566. Asus Laptop ACPI Extras version 0.30
  567. ACPI: EC: non-query interrupt received, switching to interrupt mode
  568. unsupported model UL30A, trying default values
  569. send /proc/acpi/dsdt to the developers
  570. ACPI: LNXTHERM:01 is registered as thermal_zone0
  571. ACPI: Thermal Zone [THRM] (53 C)
  572. Linux video capture interface: v2.00
  573. uvcvideo: no version for "v4l_compat_ioctl32" found: kernel tainted.
  574. uvcvideo: Found UVC 1.00 device USB 2.0 UVC 0.3M Webcam (064e:a136)
  575. usbcore: registered new interface driver uvcvideo
  576. USB Video Class driver (SVN r195)
  577. input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input7
  578. ACPI: AC Adapter [AC0] (on-line)
  579. ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
  580. PCI: Setting latency timer of device 0000:00:1b.0 to 64
  581. hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
  582. ACPI: Battery Slot [BAT0] (battery present)
  583. ACPI: device:37 is registered as cooling_device2
  584. input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:34/input/input8
  585. Bluetooth: Core ver 2.11
  586. NET: Registered protocol family 31
  587. Bluetooth: HCI device and connection manager initialized
  588. Bluetooth: HCI socket layer initialized
  589. ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
  590. Bluetooth: HCI USB driver ver 2.9
  591. usbcore: registered new interface driver hci_usb
  592. Marking TSC unstable due to: TSC halts in idle.
  593. Clocksource tsc unstable (delta = -78180665 ns)
  594. Bluetooth: L2CAP ver 2.9
  595. Bluetooth: L2CAP socket layer initialized
  596. Bluetooth: RFCOMM socket layer initialized
  597. Bluetooth: RFCOMM TTY layer initialized
  598. Bluetooth: RFCOMM ver 1.8
  599. EXT3 FS on sda9, internal journal
  600. device-mapper: uevent: version 1.0.3
  601. device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
  602. fuse init (API version 7.9)
  603. Atheros(R) L2 Ethernet Driver - version 2.0.4
  604. Copyright (c) 2007 Atheros Corporation.
  605. [drm] Initialized drm 1.1.0 20060810
  606. PCI: Unable to reserve mem region #3:10000000@d0000000 for device 0000:00:02.0
  607. ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
  608. PCI: Setting latency timer of device 0000:00:02.0 to 64
  609. [drm] Initialized i915 1.13.0 20080312 on minor 0
  610. [drm] Used old pci detect: framebuffer loaded
  611. mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!