[me@freenas /]$ dmesg -a
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE-p9 #0: Thu Jul 19 16:02:19 PDT 2012
    [email protected]:/build/home/jpaetzel/8.2.0/os-base/i386/i386/build/home/jpaetzel/8.2.0/FreeBSD/src/sys/FREENAS.i386 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Family = f  Model = 3  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
  TSC: P-state invariant
real memory  = 1073741824 (1024 MB)
avail memory = 1034661888 (986 MB)
ACPI APIC Table: <DELL   WS 370 >
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL WS 370 > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, f00000 (3) failed
acpi0: reservation of 1000000, 3ee8ac00 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xc0000000-0xcfffffff,0xde000000-0xdeffffff irq 16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004001> mem 0xdcff0000-0xdcffffff irq 16 at device 0.0 on pci2
bge0: CHIP ID 0x00004001; ASIC REV 0x04; CHIP REV 0x40; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:11:11:4c:d5:80
bge0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <multimedia, audio> at device 30.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ahci0: <Intel ICH6 AHCI SATA controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf mem 0xdffffc00-0xdfffffff irq 20 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.00 with 4 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xd07ff,0xd0800-0xd3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
Timecounter "TSC" frequency 2992516380 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST340015A 3.01> ATA-6 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich0 bus 0 scbus2 target 0 lun 0
ada1: <ST3000DM001-9YN166 CC4C> ATA-8 SATA 3.x device
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich1 bus 0 scbus3 target 0 lun 0
ada2: <ST3000DM001-9YN166 CC4C> ATA-8 SATA 3.x device
ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada3 at ahcich2 bus 0 scbus4 target 0 lun 0
ada3: <ST3000DM001-9YN166 CC4C> ATA-8 SATA 3.x device
ada3: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada4 at ahcich3 bus 0 scbus5 target 0 lun 0
ada4: <ST3000DM001-9YN166 CC4C> ATA-8 SATA 3.x device
ada4: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
cd0 at ata0 bus 0 scbus0 target 1 lun 0
cd0: <PHILIPS DVD+-RW DVD8631 9D03> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ufs/FreeNASs1a
Setting hostuuid: 44454c4c-3300-1037-805a-c3c04f333631.
Setting hostid: 0x95f765c2.
ZFS filesystem version 4
ZFS storage pool version 15
/dev/ufs/FreeNASs4: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeNASs4: clean, 38418 free (34 frags, 4798 blocks, 0.1% fragmentation)
Entropy harvesting:
 kickstart
.
Starting file system checks:
/dev/ufs/FreeNASs1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeNASs1a: clean, 1210121 free (913 frags, 151151 blocks, 0.0% fragmentation)
/dev/ufs/FreeNASs3: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeNASs3: clean, 2829 free (21 frags, 351 blocks, 0.7% fragmentation)
/dev/ufs/FreeNASs4: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeNASs4: clean, 38418 free (34 frags, 4798 blocks, 0.1% fragmentation)
Mounting local file systems:
.
cannot import 'Cornucopia': one or more devices is currently unavailable
cannot open 'Cornucopia': no such pool
Setting hostname: freenas.ou.edu
.
Starting Network: lo0 bge0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	inet6 ::1 prefixlen 128
	inet 127.0.0.1 netmask 0xff000000
	nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
	ether 00:11:11:4c:d5:80
	inet 10.254.219.38 netmask 0xffffff00 broadcast 10.254.219.255
	media: Ethernet autoselect (none)
	status: no carrier
add net default: gateway xxx
route:
writing to routing socket
:
Network is unreachable
add net xxx: gateway xxx: Network is unreachable
route:
writing to routing socket
:
Network is unreachable
add net xxx: gateway xxx: Network is unreachable
Starting devd.
Generating host.conf.
Creating and/or trimming log files
.
Starting syslogd.
savecore: reboot after panic: kmem_malloc(90112): kmem_map too small: 492773376 total allocated
Nov 18 18:28:11 freenas savecore: reboot after panic: kmem_malloc(90112): kmem_map too small: 492773376 total allocated
savecore: no dump, not enough free space on device (140475 available, need 552570)
savecore: unsaved dumps found but not saved
No crash dumps in /var/crash.
ELF ldconfig path: /lib /usr/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout
ldconfig:
/usr/lib/aout
:
No such file or directory
Starting ntpd.
/etc/rc: WARNING: failed precmd routine for vmware_guestd
Updating motd:
.
16+0 records in
16+0 records out
16 bytes transferred in 0.000084 secs (190110 bytes/sec)
Generating a 1024 bit RSA private key
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
+
+
+
+
+
+

.
.
.
.
.
.
.
.
.
.
.
.
.
+
+
+
+
+
+

unable to write 'random state'
writing new private key to '/etc/ssl/freenas/CA/private/cakey.key'
-----
writing RSA key
Starting django.
Waiting for http...
Done.
Performing sanity check on nginx configuration:
nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
Starting nginx.
Starting collectd.
Configuring syscons:
 blanktime
.
Starting sshd.
Starting cron.
Starting rpcbind.
Starting mountd.

Tue Nov 18 18:28:33 PST 2014