API tools faq
paste
Advertisement
Guest User

wishx-xbian1

a guest
Feb 29th, 2016
128
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.50 KB | None | 0 0
raw download clone embed print report
  1. xbian@xbian ~ $ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Initializing cgroup subsys cpuset
  4. [ 0.000000] Initializing cgroup subsys cpu
  5. [ 0.000000] Initializing cgroup subsys cpuacct
  6. [ 0.000000] Linux version 4.3.3+ (jenkins@vps01) (gcc version 4.9.2 ( 4.9.2-10) ) #1 SMP PREEMPT Mon Feb 22 15:50:09 CET 2016
  7. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  8. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  9. [ 0.000000] Machine model: SolidRun Cubox-i Dual/Quad
  10. [ 0.000000] cma: Reserved 288 MiB at 0x6c000000
  11. [ 0.000000] Memory policy: Data cache writealloc
  12. [ 0.000000] On node 0 totalpages: 524288
  13. [ 0.000000] free_area_init_node: node 0, pgdat 80e09900, node_mem_map ee768000
  14. [ 0.000000] DMA zone: 3568 pages used for memmap
  15. [ 0.000000] DMA zone: 0 pages reserved
  16. [ 0.000000] DMA zone: 456704 pages, LIFO batch:31
  17. [ 0.000000] HighMem zone: 67584 pages, LIFO batch:15
  18. [ 0.000000] PERCPU: Embedded 13 pages/cpu @ee714000 s23296 r8192 d21760 u53248
  19. [ 0.000000] pcpu-alloc: s23296 r8192 d21760 u53248 alloc=13*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520720
  22. [ 0.000000] Kernel command line: console=ttymxc0,${baudrate} console=tty1 coherent_pool=2M ahci_imx.hotplug=1 raid=noautodetect telnet root=/dev/mmcblk0p2 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 rootwait consoleblank=0 selinux=0 quiet loglevel=0 nohdparm splash partswap dmfc=3 pcie_aspm=off pci=nomsi mxc_hdmi.rgb_quant_range=full mxc_hdmi.enable_3d=enable vpu352=0 overclock=0 rootfstype=btrfs rootflags=subvol=root/@,autodefrag,compress=lz4,thread_pool=2 --startup-event mountall
  23. [ 0.000000] PCIe ASPM is disabled
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
  27. [ 0.000000] Memory: 1760628K/2097152K available (9961K kernel code, 687K rwdata, 3228K rodata, 576K init, 2302K bss, 41612K reserved, 294912K cma-reserved, 270336K highmem)
  28. [ 0.000000] Virtual kernel memory layout:
  29. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  31. vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  32. lowmem : 0x80000000 - 0xef800000 (1784 MB)
  33. pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  34. modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  35. .text : 0x80008000 - 0x80ce99ec (13191 kB)
  36. .init : 0x80cea000 - 0x80d7a000 ( 576 kB)
  37. .data : 0x80d7a000 - 0x80e25d84 ( 688 kB)
  38. .bss : 0x80e28000 - 0x81067a80 (2303 kB)
  39. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  40. [ 0.000000] Preemptible hierarchical RCU implementation.
  41. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  42. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  43. [ 0.000000] L2C-310 erratum 769419 enabled
  44. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  45. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  46. [ 0.000000] L2C-310 ID prefetch enabled, offset 4 lines
  47. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  48. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  49. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  50. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  51. [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  52. [ 0.000028] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  53. [ 0.001148] Console: colour dummy device 80x30
  54. [ 0.001309] console [tty1] enabled
  55. [ 0.099577] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=6000)
  56. [ 0.099595] pid_max: default: 32768 minimum: 301
  57. [ 0.099742] Mount-cache hash table entries: 4096 (order: 2, 16384 bytes)
  58. [ 0.099756] Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes)
  59. [ 0.100400] Initializing cgroup subsys net_cls
  60. [ 0.100420] Initializing cgroup subsys perf_event
  61. [ 0.100437] Initializing cgroup subsys net_prio
  62. [ 0.100467] CPU: Testing write buffer coherency: ok
  63. [ 0.100499] ftrace: allocating 31733 entries in 94 pages
  64. [ 0.152224] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  65. [ 0.152352] Setting up static identity map for 0x10008280 - 0x100082d8
  66. [ 0.169926] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  67. [ 0.175906] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  68. [ 0.181910] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  69. [ 0.181982] Brought up 4 CPUs
  70. [ 0.182005] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  71. [ 0.182013] CPU: All CPU(s) started in SVC mode.
  72. [ 0.182454] devtmpfs: initialized
  73. [ 0.190236] pinctrl core: initialized pinctrl subsystem
  74. [ 0.190985] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  75. [ 0.191106] Bus freq driver module loaded
  76. [ 0.191413] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
  77. [ 0.208446] xor: measuring software checksum speed
  78. [ 0.227571] arm4regs : 1342.000 MB/sec
  79. [ 0.247570] 8regs : 956.000 MB/sec
  80. [ 0.267568] 32regs : 900.000 MB/sec
  81. [ 0.287567] neon : 898.000 MB/sec
  82. [ 0.287578] xor: using function: arm4regs (1342.000 MB/sec)
  83. [ 0.288913] NET: Registered protocol family 16
  84. [ 0.304106] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  85. [ 0.304875] i2c /dev entries driver
  86. [ 0.309582] cpuidle: using governor menu
  87. [ 0.310129] CPU identified as i.MX6Q, silicon rev 1.2
  88. [ 0.324100] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  89. [ 0.327046] i2c i2c-1: IMX I2C adapter registered
  90. [ 0.327064] i2c i2c-1: can't use DMA
  91. [ 0.327911] i2c i2c-2: IMX I2C adapter registered
  92. [ 0.327929] i2c i2c-2: can't use DMA
  93. [ 0.333638] imx-ipuv3 2400000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)
  94. [ 0.335736] sram 905000.sram: adding chunk 0x0-0x3b000
  95. [ 0.335770] sram 905000.sram: SRAM pool: 236 KiB @ 0xf0140000
  96. [ 0.339644] imx-ipuv3 2800000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)
  97. [ 0.342817] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  98. [ 0.342827] hw-breakpoint: maximum watchpoint size is 4 bytes.
  99. [ 0.344141] MIPI CSI2 driver module loaded
  100. [ 0.395988] raid6: int32x1 gen() 115 MB/s
  101. [ 0.429843] raid6: int32x1 xor() 93 MB/s
  102. [ 0.463814] raid6: int32x2 gen() 148 MB/s
  103. [ 0.497764] raid6: int32x2 xor() 111 MB/s
  104. [ 0.531699] raid6: int32x4 gen() 160 MB/s
  105. [ 0.565742] raid6: int32x4 xor() 112 MB/s
  106. [ 0.599605] raid6: int32x8 gen() 177 MB/s
  107. [ 0.633756] raid6: int32x8 xor() 109 MB/s
  108. [ 0.667621] raid6: neonx1 gen() 591 MB/s
  109. [ 0.701584] raid6: neonx1 xor() 446 MB/s
  110. [ 0.735590] raid6: neonx2 gen() 660 MB/s
  111. [ 0.769608] raid6: neonx2 xor() 572 MB/s
  112. [ 0.803603] raid6: neonx4 gen() 703 MB/s
  113. [ 0.837599] raid6: neonx4 xor() 590 MB/s
  114. [ 0.871600] raid6: neonx8 gen() 503 MB/s
  115. [ 0.905586] raid6: neonx8 xor() 453 MB/s
  116. [ 0.905596] raid6: using algorithm neonx4 gen() 703 MB/s
  117. [ 0.905603] raid6: .... xor() 590 MB/s, rmw enabled
  118. [ 0.905611] raid6: using intx1 recovery algorithm
  119. [ 0.906276] mxc_sdc_fb fb@0: register mxc display driver hdmi
  120. [ 0.907624] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
  121. [ 0.907653] fbcvt: 1920x1080@60: CVT Name - 2.073M9
  122. [ 0.907693] EDID specified in file:
  123. [ 0.907786] mxc_sdc_fb fb@0: registered mxc display driver hdmi IPU1_DISP0
  124. [ 0.983842] mxs-dma 110000.dma-apbh: initialized
  125. [ 0.986113] vgaarb: loaded
  126. [ 0.986833] SCSI subsystem initialized
  127. [ 0.987028] libata version 3.00 loaded.
  128. [ 0.987312] usbcore: registered new interface driver usbfs
  129. [ 0.987388] usbcore: registered new interface driver hub
  130. [ 0.987486] usbcore: registered new device driver usb
  131. [ 0.988022] media: Linux media interface: v0.10
  132. [ 0.988091] Linux video capture interface: v2.00
  133. [ 0.988190] pps_core: LinuxPPS API ver. 1 registered
  134. [ 0.988199] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  135. [ 0.988228] PTP clock support registered
  136. [ 0.988850] Advanced Linux Sound Architecture Driver Initialized.
  137. [ 0.989778] Bluetooth: Core ver 2.20
  138. [ 0.989821] NET: Registered protocol family 31
  139. [ 0.989830] Bluetooth: HCI device and connection manager initialized
  140. [ 0.989846] Bluetooth: HCI socket layer initialized
  141. [ 0.989859] Bluetooth: L2CAP socket layer initialized
  142. [ 0.989895] Bluetooth: SCO socket layer initialized
  143. [ 0.990696] clocksource: Switched to clocksource mxc_timer1
  144. [ 1.027497] Console: switching to colour frame buffer device 240x67
  145. [ 1.080512] NET: Registered protocol family 2
  146. [ 1.081326] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
  147. [ 1.081483] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  148. [ 1.081721] TCP: Hash tables configured (established 16384 bind 16384)
  149. [ 1.081823] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  150. [ 1.081921] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  151. [ 1.082212] NET: Registered protocol family 1
  152. [ 1.082633] RPC: Registered named UNIX socket transport module.
  153. [ 1.082644] RPC: Registered udp transport module.
  154. [ 1.082651] RPC: Registered tcp transport module.
  155. [ 1.082659] RPC: Registered tcp NFSv4.1 backchannel transport module.
  156. [ 1.082721] PCI: CLS 0 bytes, default 64
  157. [ 1.082967] Unpacking initramfs...
  158. [ 1.111740] mxc_hdmi 20e0000.hdmi_video: vic: 3, xres = 720, yres = 480, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 1, pclk = 37037
  159. [ 1.111754] mxc_hdmi 20e0000.hdmi_video: vic: 4, xres = 1280, yres = 720, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 1, pclk = 13468
  160. [ 1.111766] mxc_hdmi 20e0000.hdmi_video: vic: 2, xres = 720, yres = 480, ratio = 4/3, freq = 60.0Hz, vmode = 2048, flag = 1, pclk = 37037
  161. [ 1.111777] mxc_hdmi 20e0000.hdmi_video: vic: 5, xres = 1920, yres = 1080, ratio = 16/9, freq = 60.0Hz, vmode = 8193, flag = 2, pclk = 13468
  162. [ 1.111791] mxc_hdmi 20e0000.hdmi_video: vic: 7, xres = 1440, yres = 480, ratio = 16/9, freq = 60.0Hz, vmode = 8193, flag = 2, pclk = 37000
  163. [ 1.111803] mxc_hdmi 20e0000.hdmi_video: vic: 6, xres = 1440, yres = 480, ratio = 4/3, freq = 60.0Hz, vmode = 2049, flag = 2, pclk = 37000
  164. [ 1.153058] mxc_hdmi 20e0000.hdmi_video: mxc_hdmi_cable_connected_edid reports HDMI mode
  165. [ 1.469061] Freeing initrd memory: 5916K (89000000 - 895c7000)
  166. [ 1.469990] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  167. [ 1.471726] futex hash table entries: 1024 (order: 4, 65536 bytes)
  168. [ 1.479638] VFS: Disk quotas dquot_6.6.0
  169. [ 1.479811] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  170. [ 1.481757] NFS: Registering the id_resolver key type
  171. [ 1.481800] Key type id_resolver registered
  172. [ 1.481808] Key type id_legacy registered
  173. [ 1.481837] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  174. [ 1.482153] fuse init (API version 7.23)
  175. [ 1.483491] cryptodev: driver 1.7 loaded.
  176. [ 1.490253] bounce: pool size: 64 pages
  177. [ 1.490327] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  178. [ 1.490347] io scheduler noop registered
  179. [ 1.490360] io scheduler deadline registered
  180. [ 1.490399] io scheduler cfq registered
  181. [ 1.490665] io scheduler bfq registered (default)
  182. [ 1.490674] BFQ I/O-scheduler version: v7r7
  183. [ 1.491211] imx-weim 21b8000.weim: Driver registered.
  184. [ 1.495325] imx-sdma 20ec000.sdma: no event needs to be remapped
  185. [ 1.495466] imx-sdma 20ec000.sdma: loaded firmware 3.1
  186. [ 1.498220] imx-sdma 20ec000.sdma: initialized
  187. [ 1.669409] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 24, base_baud = 5000000) is a IMX
  188. [ 1.669970] console [ttymxc0] enabled
  189. [ 1.670927] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 292, base_baud = 5000000) is a IMX
  190. [ 1.671954] [drm] Initialized drm 1.1.0 20060810
  191. [ 1.672155] mGine mflash driver, (c) 2008 mGine Co.
  192. [ 1.672824] SCSI Media Changer driver v0.25
  193. [ 1.673705] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044
  194. [ 1.673720] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000
  195. [ 1.673733] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000
  196. [ 1.673746] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
  197. [ 1.676613] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
  198. [ 1.676649] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  199. [ 1.676667] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
  200. [ 1.678602] scsi host0: ahci-imx
  201. [ 1.678945] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 302
  202. [ 1.681047] libphy: Fixed MDIO Bus: probed
  203. [ 1.681234] Atheros(R) L2 Ethernet Driver - version 2.2.3
  204. [ 1.681243] Copyright (c) 2007 Atheros Corporation.
  205. [ 1.682235] 2188000.ethernet supply phy not found, using dummy regulator
  206. [ 1.685198] pps pps0: new PPS source ptp0
  207. [ 1.697750] libphy: fec_enet_mii_bus: probed
  208. [ 1.753567] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
  209. [ 1.753916] fec 2188000.ethernet eth0: registered PHC device 0
  210. [ 1.754744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  211. [ 1.754776] ehci-pci: EHCI PCI platform driver
  212. [ 1.754901] usbcore: registered new interface driver uas
  213. [ 1.754979] usbcore: registered new interface driver usb-storage
  214. [ 1.755029] usbcore: registered new interface driver ums-alauda
  215. [ 1.755091] usbcore: registered new interface driver ums-cypress
  216. [ 1.755142] usbcore: registered new interface driver ums-datafab
  217. [ 1.755192] usbcore: registered new interface driver ums_eneub6250
  218. [ 1.755242] usbcore: registered new interface driver ums-freecom
  219. [ 1.755290] usbcore: registered new interface driver ums-isd200
  220. [ 1.755338] usbcore: registered new interface driver ums-jumpshot
  221. [ 1.755387] usbcore: registered new interface driver ums-onetouch
  222. [ 1.755459] usbcore: registered new interface driver ums-realtek
  223. [ 1.755513] usbcore: registered new interface driver ums-sddr09
  224. [ 1.755562] usbcore: registered new interface driver ums-sddr55
  225. [ 1.755611] usbcore: registered new interface driver ums-usbat
  226. [ 1.755732] usbcore: registered new interface driver usbserial
  227. [ 1.755776] usbcore: registered new interface driver usbserial_generic
  228. [ 1.755819] usbserial: USB Serial support registered for generic
  229. [ 1.760842] ci_hdrc ci_hdrc.0: doesn't support gadget
  230. [ 1.760862] ci_hdrc ci_hdrc.0: EHCI Host Controller
  231. [ 1.760893] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
  232. [ 1.768739] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
  233. [ 1.769610] hub 1-0:1.0: USB hub found
  234. [ 1.769658] hub 1-0:1.0: 1 port detected
  235. [ 1.773614] ci_hdrc ci_hdrc.1: EHCI Host Controller
  236. [ 1.773646] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
  237. [ 1.780735] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  238. [ 1.781551] hub 2-0:1.0: USB hub found
  239. [ 1.781598] hub 2-0:1.0: 1 port detected
  240. [ 1.787213] rtc-pcf8523 2-0068: rtc core: registered rtc-pcf8523 as rtc0
  241. [ 1.787780] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
  242. [ 1.788726] IR RC6 protocol handler initialized
  243. [ 1.792324] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
  244. [ 1.792472] md: linear personality registered for level -1
  245. [ 1.792489] md: raid0 personality registered for level 0
  246. [ 1.792503] md: raid1 personality registered for level 1
  247. [ 1.792516] md: raid10 personality registered for level 10
  248. [ 1.792532] Bluetooth: HCI UART driver ver 2.3
  249. [ 1.792541] Bluetooth: HCI UART protocol H4 registered
  250. [ 1.792549] Bluetooth: HCI UART protocol BCSP registered
  251. [ 1.792556] Bluetooth: HCI UART protocol LL registered
  252. [ 1.792565] Bluetooth: HCI UART protocol ATH3K registered
  253. [ 1.792572] Bluetooth: HCI UART protocol Three-wire (H5) registered
  254. [ 1.792676] Bluetooth: HCI UART protocol Intel registered
  255. [ 1.792808] Bluetooth: HCI UART protocol BCM registered
  256. [ 1.792816] Bluetooth: HCI UART protocol QCA registered
  257. [ 1.793388] sdhci: Secure Digital Host Controller Interface driver
  258. [ 1.793396] sdhci: Copyright(c) Pierre Ossman
  259. [ 1.793411] Synopsys Designware Multimedia Card Interface Driver
  260. [ 1.794036] usbcore: registered new interface driver ushc
  261. [ 1.794056] sdhci-pltfm: SDHCI platform and OF driver helper
  262. [ 1.795080] ERROR: could not get clock /usdhc1_pwrseq:ext_clock(0)
  263. [ 1.795116] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq
  264. [ 1.796541] sdhci-esdhc-imx 2190000.usdhc: No vqmmc regulator found
  265. [ 1.988737] ata1: SATA link down (SStatus 0 SControl 300)
  266. [ 2.028732] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
  267. [ 2.029189] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
  268. [ 2.029680] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
  269. [ 2.051832] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  270. [ 2.053577] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  271. [ 2.055320] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  272. [ 2.058443] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  273. [ 2.061572] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  274. [ 2.062854] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  275. [ 2.063564] ledtrig-cpu: registered to indicate activity on CPUs
  276. [ 2.064768] caam 2100000.caam: Entropy delay = 3200
  277. [ 2.064797] caam 2100000.caam: Instantiated RNG4 SH0
  278. [ 2.072721] usb 1-1: new high-speed USB device number 2 using ci_hdrc
  279. [ 2.084713] usb 2-1: new high-speed USB device number 2 using ci_hdrc
  280. [ 2.114825] mmc0: new high speed SDIO card at address 0001
  281. [ 2.125563] caam 2100000.caam: Instantiated RNG4 SH1
  282. [ 2.125674] caam 2100000.caam: device ID = 0x0a16010000000000 (Era -524)
  283. [ 2.125685] caam 2100000.caam: job rings = 2, qi = 0
  284. [ 2.150802] caam algorithms registered in /proc/crypto
  285. [ 2.154735] caam_jr 2101000.jr0: registering rng-caam
  286. [ 2.154909] hidraw: raw HID events driver (C) Jiri Kosina
  287. [ 2.155089] usbcore: registered new interface driver usbhid
  288. [ 2.155098] usbhid: USB HID core driver
  289. [ 2.171099] mmc1: host does not support reading read-only switch, assuming write-enable
  290. [ 2.179251] mmc1: new high speed SDXC card at address aaaa
  291. [ 2.180246] mmcblk0: mmc1:aaaa SL64G 59.4 GiB
  292. [ 2.184182] mmcblk0: p1 p2 p3
  293. [ 2.194527] hub 1-1:1.0: USB hub found
  294. [ 2.194776] hub 1-1:1.0: 4 ports detected
  295. [ 2.206503] scsi host1: uas
  296. [ 2.208215] scsi 1:0:0:0: Direct-Access Seagate Expansion Desk 0909 PQ: 0 ANSI: 6
  297. [ 2.211541] sd 1:0:0:0: [sda] 9767541167 512-byte logical blocks: (5.00 TB/4.54 TiB)
  298. [ 2.211546] sd 1:0:0:0: Attached scsi generic sg0 type 0
  299. [ 2.211573] sd 1:0:0:0: [sda] 4096-byte physical blocks
  300. [ 2.213271] sd 1:0:0:0: [sda] Write Protect is off
  301. [ 2.213298] sd 1:0:0:0: [sda] Mode Sense: 53 00 00 08
  302. [ 2.214141] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  303. [ 2.239824] sda: sda1
  304. [ 2.244858] sd 1:0:0:0: [sda] Attached SCSI disk
  305. [ 2.470720] usb 1-1.2: new high-speed USB device number 3 using ci_hdrc
  306. [ 2.524000] Galcore version 4.6.9.9754
  307. [ 2.549385] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  308. [ 2.550296] mxc_vpu 2040000.vpu: VPU initialized
  309. [ 2.551080] mxc_hdmi_cec soc:hdmi_cec@00120000: hdmi_cec_dev_probe: HDMI CEC initialized
  310. [ 2.568463] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
  311. [ 2.590895] imx-audio-hdmi sound-hdmi: hdmi-hifi <-> soc:hdmi_audio@00120000 mapping ok
  312. [ 2.591987] Initializing XFRM netlink socket
  313. [ 2.592031] NET: Registered protocol family 17
  314. [ 2.592076] NET: Registered protocol family 15
  315. [ 2.592206] Bluetooth: RFCOMM TTY layer initialized
  316. [ 2.592226] Bluetooth: RFCOMM socket layer initialized
  317. [ 2.592246] Bluetooth: RFCOMM ver 1.11
  318. [ 2.592273] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  319. [ 2.592292] Bluetooth: HIDP socket layer initialized
  320. [ 2.592634] Key type dns_resolver registered
  321. [ 2.594848] Registering SWP/SWPB emulation handler
  322. [ 2.599209] Btrfs loaded
  323. [ 2.615107] Key type encrypted registered
  324. [ 2.617062] input: gpio-keys as /devices/soc0/gpio-keys/input/input0
  325. [ 2.618658] rtc-pcf8523 2-0068: setting system clock to 2016-03-01 00:10:47 UTC (1456791047)
  326. [ 2.628853] ALSA device list:
  327. [ 2.628866] #0: imx-spdif
  328. [ 2.628872] #1: imx-hdmi-soc
  329. [ 2.629576] Freeing unused kernel memory: 576K (80cea000 - 80d7a000)
  330. [ 2.660757] usb 1-1.3: new full-speed USB device number 4 using ci_hdrc
  331. [ 2.718238] systemd-udevd[199]: starting version 215
  332. [ 2.720435] random: udevd urandom read with 27 bits of entropy available
  333. [ 2.752861] usb 1-1.3: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
  334. [ 2.752880] usb 1-1.3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
  335. [ 2.832758] usb 1-1.4: new low-speed USB device number 5 using ci_hdrc
  336. [ 2.935636] input: Riite Mini Keybo as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1997:1221.0001/input/input1
  337. [ 2.987529] hid-generic 0003:1997:1221.0001: input,hidraw0: USB HID v1.00 Keyboard [Riite Mini Keybo] on usb-ci_hdrc.0-1.4/input0
  338. [ 2.993996] input: Riite Mini Keybo as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:1221.0002/input/input2
  339. [ 3.046012] hid-generic 0003:1997:1221.0002: input,hidraw1: USB HID v1.00 Mouse [Riite Mini Keybo] on usb-ci_hdrc.0-1.4/input1
  340. [ 3.766009] BTRFS: device label xbian devid 1 transid 145 /dev/mmcblk0p2
  341. [ 3.965968] BTRFS info (device mmcblk0p2): enabling auto defrag
  342. [ 3.965989] BTRFS info (device mmcblk0p2): disk space caching is enabled
  343. [ 3.965996] BTRFS: has skinny extents
  344. [ 4.010785] BTRFS: detected SSD devices, enabling SSD mode
  345. [ 4.013668] BTRFS: checking UUID tree
  346. [ 7.502876] init: xbian-failaccess main process (495) killed by TERM signal
  347. [ 8.060850] init: failsafe main process (614) killed by TERM signal
  348. [ 8.662291] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem
  349. [ 8.667972] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
  350. [ 9.734097] systemd-udevd[1409]: starting version 215
  351. [ 9.748565] random: nonblocking pool is initialized
  352. [ 10.108196] IR keymap rc-rc6-mce not found
  353. [ 10.108211] Registered IR keymap rc-empty
  354. [ 10.108640] input: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0/input3
  355. [ 10.109260] rc0: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0
  356. [ 10.162081] IR RC5(x/sz) protocol handler initialized
  357. [ 10.165061] IR JVC protocol handler initialized
  358. [ 10.165074] IR NEC protocol handler initialized
  359. [ 10.192754] IR Sony protocol handler initialized
  360. [ 10.219772] IR SANYO protocol handler initialized
  361. [ 10.229182] IR Sharp protocol handler initialized
  362. [ 10.250354] IR MCE Keyboard/mouse protocol handler initialized
  363. [ 10.272835] lirc_dev: IR Remote Control driver registered, major 239
  364. [ 10.274395] input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input4
  365. [ 10.278540] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
  366. [ 10.278564] IR LIRC bridge handler initialized
  367. [ 10.279252] IR XMP protocol handler initialized
  368. [ 10.295618] IR keymap rc-rc6-mce not found
  369. [ 10.295633] Registered IR keymap rc-empty
  370. [ 10.296136] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc1/input5
  371. [ 10.296435] rc1: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc1
  372. [ 10.305156] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input6
  373. [ 10.306057] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 1
  374. [ 10.457103] mousedev: PS/2 mouse device common for all mice
  375. [ 10.474847] mceusb 1-1.3:1.0: Registered TopSeed Technology Corp. eHome Infrared Transceiver with mce emulator interface version 1
  376. [ 10.474871] mceusb 1-1.3:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
  377. [ 10.475032] usbcore: registered new interface driver mceusb
  378. [ 10.583170] usbcore: registered new interface driver brcmfmac
  379. [ 10.636758] usb 1-1.2: reset high-speed USB device number 3 using ci_hdrc
  380. [ 10.739744] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
  381. [ 10.784990] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
  382. [ 10.785897] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  383. [ 10.787300] usbcore: registered new interface driver rt2800usb
  384. [ 10.815431] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 25 2011 19:34:12 version 5.90.125.104
  385. [ 10.865055] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
  386. [ 11.337205] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  387. [ 11.349107] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
  388. [ 17.191582] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  389. [ 18.450549] systemd-logind[2517]: New seat seat0.
  390. [ 23.657309] init: wait-for-state (xbmcxbmc-loaded) main process (1913) killed by TERM signal
  391. [ 30.872832] init: xbmc-failed-start main process (617) killed by TERM signal
  392. [ 30.913140] init: wait-for-state (zram-swapxbmc-done) main process (1714) killed by TERM signal
  393. [ 651.825575] mceusb 1-1.3:1.0: Error: urb status = -71
  394. [ 651.830531] mceusb 1-1.3:1.0: Error: urb status = -71
  395. [ 651.835536] mceusb 1-1.3:1.0: Error: urb status = -71
  396. [ 651.840538] mceusb 1-1.3:1.0: Error: urb status = -71
  397. [ 651.845533] mceusb 1-1.3:1.0: Error: urb status = -71
  398. [ 651.850331] mceusb 1-1.3:1.0: Error: urb status = -71
  399. [ 651.854327] mceusb 1-1.3:1.0: Error: urb status = -71
  400. [ 651.859329] mceusb 1-1.3:1.0: Error: urb status = -71
  401. [ 651.864331] mceusb 1-1.3:1.0: Error: urb status = -71
  402. [ 651.869332] mceusb 1-1.3:1.0: Error: urb status = -71
  403. [ 651.874331] mceusb 1-1.3:1.0: Error: urb status = -71
  404. [ 651.879334] mceusb 1-1.3:1.0: Error: urb status = -71
  405. [ 651.884329] mceusb 1-1.3:1.0: Error: urb status = -71
  406. [ 651.889330] mceusb 1-1.3:1.0: Error: urb status = -71
  407. [ 651.894329] mceusb 1-1.3:1.0: Error: urb status = -71
  408. [ 651.899329] mceusb 1-1.3:1.0: Error: urb status = -71
  409. [ 651.904330] mceusb 1-1.3:1.0: Error: urb status = -71
  410. [ 651.909331] mceusb 1-1.3:1.0: Error: urb status = -71
  411. [ 651.914332] mceusb 1-1.3:1.0: Error: urb status = -71
  412. [ 651.919330] mceusb 1-1.3:1.0: Error: urb status = -71
  413. [ 651.924331] mceusb 1-1.3:1.0: Error: urb status = -71
  414. [ 651.929331] mceusb 1-1.3:1.0: Error: urb status = -71
  415. [ 651.934331] mceusb 1-1.3:1.0: Error: urb status = -71
  416. [ 651.939340] mceusb 1-1.3:1.0: Error: urb status = -71
  417. [ 651.943548] mceusb 1-1.3:1.0: Error: urb status = -71
  418. [ 651.949495] mceusb 1-1.3:1.0: Error: urb status = -71
  419. [ 651.954482] mceusb 1-1.3:1.0: Error: urb status = -71
  420. [ 651.959485] mceusb 1-1.3:1.0: Error: urb status = -71
  421. [ 651.964516] mceusb 1-1.3:1.0: Error: urb status = -71
  422. [ 651.969531] mceusb 1-1.3:1.0: Error: urb status = -71
  423. [ 651.974331] mceusb 1-1.3:1.0: Error: urb status = -71
  424. [ 651.979335] mceusb 1-1.3:1.0: Error: urb status = -71
  425. [ 651.984334] mceusb 1-1.3:1.0: Error: urb status = -71
  426. [ 651.989330] mceusb 1-1.3:1.0: Error: urb status = -71
  427. [ 651.994330] mceusb 1-1.3:1.0: Error: urb status = -71
  428. [ 651.999332] mceusb 1-1.3:1.0: Error: urb status = -71
  429. [ 652.004330] mceusb 1-1.3:1.0: Error: urb status = -71
  430. [ 652.005333] usb 1-1.3: USB disconnect, device number 4
  431. [ 817.824727] usb 1-1.1: new full-speed USB device number 6 using ci_hdrc
  432. [ 817.900730] usb 1-1.1: device descriptor read/64, error -32
  433. [ 818.096721] usb 1-1.1: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
  434. [ 818.096737] usb 1-1.1: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
  435. [ 818.101980] IR keymap rc-rc6-mce not found
  436. [ 818.101990] Registered IR keymap rc-empty
  437. [ 818.102306] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc1/input7
  438. [ 818.102509] rc1: Media Center Ed. eHome Infrared Remote Transceiver (1784:0006) as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc1
  439. [ 818.102956] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input8
  440. [ 818.103395] rc rc1: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 1
  441. [ 819.040787] mceusb 1-1.1:1.0: Registered TopSeed Technology Corp. eHome Infrared Transceiver with mce emulator interface version 1
  442. [ 819.040803] mceusb 1-1.1:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
  443. [ 2631.551171] systemd-logind[2517]: Failed to start user service: Unknown unit: user@1000.service
  444. [ 2631.565634] systemd-logind[2517]: New session c1 of user xbian.
  445. xbian@xbian ~ $
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!