Untitled

[    0.000000] [c0] Booting Linux on physical CPU 0x100
[    0.000000] [c0] Initializing cgroup subsys cpuset
[    0.000000] [c0] Initializing cgroup subsys cpu
[    0.000000] [c0] Initializing cgroup subsys cpuacct
[    0.000000] [c0] Linux version 3.10.96+ (root@odroid-wheezy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP PREEMPT Fri May 13 14:06:12 CEST 2016
[    0.000000] [c0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] [c0] Machine: ODROID-XU3, model: Hardkernel odroid-xu3 board based on EXYNOS5422
[    0.000000] [c0] ION: Contiguous 0x6650000 bytes @ 0x0 defined for 0:common
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 2:mfc_sh
[    0.000000] [c0] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd
[    0.000000] [c0] ION: Contiguous 0x6000000 bytes @ 0x0 defined for 11:video
[    0.000000] [c0] ION: Contiguous 0x1000000 bytes @ 0x0 defined for 7:mfc_input
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 9:sectbl
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 8:mfc_fw
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 12:mfc_nfw
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 13:secdma
[    0.000000] [c0] cma: CMA: reserved 104 MiB at b8000000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at b7c00000
[    0.000000] [c0] cma: CMA: reserved 8 MiB at b7400000
[    0.000000] [c0] cma: CMA: reserved 96 MiB at b1400000
[    0.000000] [c0] cma: CMA: reserved 16 MiB at b0400000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at b0000000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at afc00000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at af800000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at af400000
[    0.000000] [c0] cma: CMA: reserved 256 MiB at 5f800000
[    0.000000] [c0] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] [c0] create_mapping_memory: section: 40000000 ~ 6f800000
[    0.000000] [c0] CPU EXYNOS5422 (id 0xe5422001)
[    0.000000] [c0] On node 0 totalpages: 518656
[    0.000000] [c0] free_area_init_node: node 0, pgdat c0977400, node_mem_map c0de6000
[    0.000000] [c0]   Normal zone: 1520 pages used for memmap
[    0.000000] [c0]   Normal zone: 0 pages reserved
[    0.000000] [c0]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000] [c0]   HighMem zone: 2532 pages used for memmap
[    0.000000] [c0]   HighMem zone: 324096 pages, LIFO batch:31
[    0.000000] [c0] PERCPU: Embedded 9 pages/cpu @c1df4000 s14912 r8192 d13760 u36864
[    0.000000] [c0] pcpu-alloc: s14912 r8192 d13760 u36864 alloc=9*4096
[    0.000000] [c0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] [c0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517136
[    0.000000] [c0] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=00:1e:06:61:7a:81 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi
[    0.000000] [c0] hdmi: using HDMI Mode
[    0.000000] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] [c0] allocated 4149248 bytes of page_cgroup
[    0.000000] [c0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] [c0] Memory: 2026MB = 2026MB total
[    0.000000] [c0] Memory: 1522276k/1522276k available, 552348k reserved, 1046528K highmem
[    0.000000] [c0] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc089bffc   (8784 kB)
      .init : 0xc089c000 - 0xc0906a40   ( 427 kB)
      .data : 0xc0908000 - 0xc097b70c   ( 462 kB)
       .bss : 0xc097b70c - 0xc0de53a4   (4520 kB)
[    0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] [c0] Preemptible hierarchical RCU implementation.
[    0.000000] [c0] NR_IRQS:16 nr_irqs:16 16
[    0.000000] [c0] apll 800000000
[    0.000000] [c0] bpll 825000000
[    0.000000] [c0] cpll 666000000
[    0.000000] [c0] dpll 600000000
[    0.000000] [c0] epll 180633609
[    0.000000] [c0] rpll 66000000
[    0.000000] [c0] ipll 432000000
[    0.000000] [c0] spll 800000000
[    0.000000] [c0] dout_spll_ctrl_div2 400000000
[    0.000000] [c0] vpll 400000000
[    0.000000] [c0] mpll 532000000
[    0.000000] [c0] Clock enables : TOP, MIF
[    0.000000] [c0] mmc0: dout_mmc0 666000000
[    0.000000] [c0] mmc1: dout_mmc1 800000000
[    0.000000] [c0] mmc2: dout_mmc2 666000000
[    0.000000] [c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000
[    0.000000] [c0] [g2d_init_clock:319] aclk_333_g2d:333000000
[    0.000000] [c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 300000000
[    0.000000] [c0] [jpeg_clock_init:374]jpeg: dout_aclk_300_jpeg 300000000 aclk_300_jpeg 300000000
[    0.000000] [c0] mfc: aclk_333 400000000
[    0.000000] [c0] Exynos5422: clock setup completed
[    0.000000] [c0] Exynos: pwm: clock setup completed
[    0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] [c0] Switching to timer-based delay loop
[    0.000000] [c0] EXYNOS5422 PMU Initialize
[    0.000000] [c0] Console: colour dummy device 80x30
[    0.000000] [c0] console [tty1] enabled
[    0.000000] [c0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] [c0] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] [c0] ... MAX_LOCK_DEPTH:          48
[    0.000000] [c0] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] [c0] ... CLASSHASH_SIZE:          4096
[    0.000000] [c0] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] [c0] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] [c0] ... CHAINHASH_SIZE:          16384
[    0.000000] [c0]  memory used by lock dependency info: 3679 kB
[    0.000000] [c0]  per task-struct memory footprint: 1152 bytes
[    0.007722] [c0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[    0.007816] [c0] pid_max: default: 32768 minimum: 301
[    0.008322] [c0] Mount-cache hash table entries: 512
[    0.044420] [c0] Initializing cgroup subsys debug
[    0.044495] [c0] Initializing cgroup subsys memory
[    0.044610] [c0] Initializing cgroup subsys devices
[    0.044675] [c0] Initializing cgroup subsys freezer
[    0.044737] [c0] Initializing cgroup subsys blkio
[    0.044787] [c0] Initializing cgroup subsys perf_event
[    0.045102] [c0] CPU: Testing write buffer coherency: ok
[    0.045203] [c0] ftrace: allocating 22868 entries in 68 pages
[    0.093615] [c0] /cpus/cpu@0 missing clock-frequency property
[    0.093684] [c0] /cpus/cpu@1 missing clock-frequency property
[    0.093732] [c0] /cpus/cpu@2 missing clock-frequency property
[    0.093778] [c0] /cpus/cpu@3 missing clock-frequency property
[    0.093823] [c0] /cpus/cpu@4 missing clock-frequency property
[    0.093868] [c0] /cpus/cpu@5 missing clock-frequency property
[    0.093912] [c0] /cpus/cpu@6 missing clock-frequency property
[    0.093956] [c0] /cpus/cpu@7 missing clock-frequency property
[    0.094054] [c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.094264] [c0] Running under secure firmware.
[    0.094335] [c0] Setting up static identity map for 0xc061ab88 - 0xc061abe0
[    0.094393] [c0] Exynos-SnapShot: exynos_ss_init failed
[    0.114782] [c0] ftrace: Allocated trace_printk buffers
[    0.136504] [c0] cpu1: SWRESET
[    0.136759] [c1] CPU1: Booted secondary processor
[    0.136787] [c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.146421] [c0] cpu2: SWRESET
[    0.146739] [c2] CPU2: Booted secondary processor
[    0.146766] [c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.156402] [c0] cpu3: SWRESET
[    0.156715] [c3] CPU3: Booted secondary processor
[    0.156741] [c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.165595] [c4] CPU4: Booted secondary processor
[    0.166445] [c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.175594] [c5] CPU5: Booted secondary processor
[    0.176428] [c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.185623] [c6] CPU6: Booted secondary processor
[    0.186456] [c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.195597] [c7] CPU7: Booted secondary processor
[    0.196449] [c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.196723] [c0] Brought up 8 CPUs
[    0.197050] [c0] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.197092] [c0] CPU: All CPU(s) started in SVC mode.
[    0.199626] [c0] devtmpfs: initialized
[    0.239730] [c6] sched: registering cpufreq notifiers for scale-invariant loads
[    0.242211] [c6] pinctrl core: initialized pinctrl subsystem
[    0.243270] [c6] regulator-dummy: no parameters
[    0.253104] [c6] NET: Registered protocol family 16
[    0.253641] [c6] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.260431] [c6] gpiochip_add: registered GPIOs 0 to 7 on device: gpy7
[    0.260611] [c6] gpiochip_add: registered GPIOs 8 to 15 on device: gpx0
[    0.260783] [c6] gpiochip_add: registered GPIOs 16 to 23 on device: gpx1
[    0.260953] [c6] gpiochip_add: registered GPIOs 24 to 31 on device: gpx2
[    0.261130] [c6] gpiochip_add: registered GPIOs 32 to 39 on device: gpx3
[    0.263096] [c6] gpiochip_add: registered GPIOs 40 to 47 on device: gpc0
[    0.263277] [c6] gpiochip_add: registered GPIOs 48 to 55 on device: gpc1
[    0.263450] [c6] gpiochip_add: registered GPIOs 56 to 62 on device: gpc2
[    0.263622] [c6] gpiochip_add: registered GPIOs 63 to 66 on device: gpc3
[    0.263799] [c6] gpiochip_add: registered GPIOs 67 to 68 on device: gpc4
[    0.263982] [c6] gpiochip_add: registered GPIOs 69 to 76 on device: gpd1
[    0.264154] [c6] gpiochip_add: registered GPIOs 77 to 82 on device: gpy0
[    0.264331] [c6] gpiochip_add: registered GPIOs 83 to 86 on device: gpy1
[    0.264502] [c6] gpiochip_add: registered GPIOs 87 to 92 on device: gpy2
[    0.264679] [c6] gpiochip_add: registered GPIOs 93 to 100 on device: gpy3
[    0.264855] [c6] gpiochip_add: registered GPIOs 101 to 108 on device: gpy4
[    0.265028] [c6] gpiochip_add: registered GPIOs 109 to 116 on device: gpy5
[    0.265209] [c6] gpiochip_add: registered GPIOs 117 to 124 on device: gpy6
[    0.266985] [c6] gpiochip_add: registered GPIOs 125 to 132 on device: gpe0
[    0.267166] [c6] gpiochip_add: registered GPIOs 133 to 134 on device: gpe1
[    0.267339] [c6] gpiochip_add: registered GPIOs 135 to 140 on device: gpf0
[    0.267511] [c6] gpiochip_add: registered GPIOs 141 to 148 on device: gpf1
[    0.267687] [c6] gpiochip_add: registered GPIOs 149 to 156 on device: gpg0
[    0.267862] [c6] gpiochip_add: registered GPIOs 157 to 164 on device: gpg1
[    0.268036] [c6] gpiochip_add: registered GPIOs 165 to 166 on device: gpg2
[    0.268216] [c6] gpiochip_add: registered GPIOs 167 to 170 on device: gpj4
[    0.269655] [c6] gpiochip_add: registered GPIOs 171 to 178 on device: gpa0
[    0.269844] [c6] gpiochip_add: registered GPIOs 179 to 184 on device: gpa1
[    0.270020] [c6] gpiochip_add: registered GPIOs 185 to 192 on device: gpa2
[    0.270201] [c6] gpiochip_add: registered GPIOs 193 to 197 on device: gpb0
[    0.270377] [c6] gpiochip_add: registered GPIOs 198 to 202 on device: gpb1
[    0.270599] [c6] gpiochip_add: registered GPIOs 203 to 206 on device: gpb2
[    0.270784] [c6] gpiochip_add: registered GPIOs 207 to 214 on device: gpb3
[    0.270961] [c6] gpiochip_add: registered GPIOs 215 to 216 on device: gpb4
[    0.271139] [c6] gpiochip_add: registered GPIOs 217 to 224 on device: gph0
[    0.273107] [c6] gpiochip_add: registered GPIOs 225 to 231 on device: gpz
[    0.292877] [c6] syscon 10040000.system-controller: regmap [mem 0x10040000-0x10044fff] registered
[    0.293380] [c6] syscon 10050000.syscon: regmap [mem 0x10050000-0x10054fff] registered
[    0.301183] [c6] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.301233] [c6] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.303142] [c6] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.307358] [c6] PM DOMAIN: pd-cam has a new child pd-isp.
[    0.308233] [c6] PM DOMAIN: pd-gscl has a new child pd-cam.
[    0.308282] [c6] EXYNOS5: PM Domain Initialize
[    0.308583] [c6]    pd-gscl   - on
[    0.308770] [c6]    pd-isp    - on
[    0.308956] [c6]    pd-mfc    - on
[    0.308989] [c6]    pd-g3d    - on,  always
[    0.309023] [c6]    pd-disp1  - on,  always
[    0.309215] [c6]    pd-maudio - on
[    0.309247] [c6]    pd-g2d    - on,  always
[    0.309437] [c6]    pd-mscl   - on
[    0.309471] [c6]    pd-fsys   - on,  always
[    0.309506] [c6]    pd-psgen  - on,  always
[    0.309541] [c6]    pd-peric  - on,  always
[    0.309574] [c6]    pd-wcore  - on,  always
[    0.309766] [c6]    pd-cam    - on
[    0.309806] [c6] EXYNOS: Initializing architecture
[    0.311445] [c6] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d
[    0.311491] [c6] exynos-sysmmu 10a60000.sysmmu: [OK]
[    0.311870] [c6] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d
[    0.311914] [c6] exynos-sysmmu 10a70000.sysmmu: [OK]
[    0.312276] [c6] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer
[    0.312318] [c6] exynos-sysmmu 14650000.sysmmu: [OK]
[    0.312649] [c6] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc
[    0.312691] [c6] exynos-sysmmu 13e80000.sysmmu: [OK]
[    0.313018] [c6] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc
[    0.313060] [c6] exynos-sysmmu 13e90000.sysmmu: [OK]
[    0.313395] [c6] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler
[    0.313437] [c6] exynos-sysmmu 12880000.sysmmu: [OK]
[    0.313777] [c6] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler
[    0.313819] [c6] exynos-sysmmu 12890000.sysmmu: [OK]
[    0.314165] [c6] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler
[    0.314207] [c6] exynos-sysmmu 128a0000.sysmmu: [OK]
[    0.314545] [c6] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler
[    0.314588] [c6] exynos-sysmmu 128c0000.sysmmu: [OK]
[    0.314921] [c6] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler
[    0.314963] [c6] exynos-sysmmu 128d0000.sysmmu: [OK]
[    0.315304] [c6] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler
[    0.315346] [c6] exynos-sysmmu 128e0000.sysmmu: [OK]
[    0.315676] [c6] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg
[    0.315718] [c6] exynos-sysmmu 11f10000.sysmmu: [OK]
[    0.316054] [c6] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg
[    0.316096] [c6] exynos-sysmmu 11f20000.sysmmu: [OK]
[    0.316418] [c6] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc
[    0.316459] [c6] exynos-sysmmu 11200000.sysmmu: [OK]
[    0.316813] [c6] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc
[    0.316855] [c6] exynos-sysmmu 11210000.sysmmu: [OK]
[    0.317221] [c6] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd
[    0.317263] [c6] exynos-sysmmu 14640000.sysmmu: [OK]
[    0.317627] [c6] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd
[    0.317668] [c6] exynos-sysmmu 14680000.sysmmu: [OK]
[    0.318104] [c6] CPU Info : Samsung Exynos5422 Soc is BIN1
[    0.318139] [c6] Exynos5422 ASV : Use Fusing Speed Group 1
[    0.318172] [c6] Exynos5422 ASV : invalid IDS value
[    0.318202] [c6] EXYNOS5422 ASV :  IDS : 0 HPM : 0
[    0.318262] [c6] VDD_ARM ASV group is 1
[    0.318296] [c6] VDD_KFC ASV group is 1
[    0.318328] [c6] VDD_INT ASV group is 1
[    0.318359] [c6] VDD_MIF ASV group is 1
[    0.318390] [c6] VDD_G3D ASV group is 1
[    0.318421] [c6] VDD_ISP ASV group is 1
[    0.332140] [c7] bio: create slab <bio-0> at 0
[    0.333968] [c7] of_get_named_gpio_flags exited with status 119
[    0.334224] [c7] VUSB_BOOST_5V: 5000 mV
[    0.334529] [c7] of_get_named_gpio_flags: can't parse gpios property
[    0.334750] [c7] MAIN_DC: no parameters
[    0.335017] [c7] of_get_named_gpio_flags: can't parse gpios property
[    0.335236] [c7] hdmi-en: no parameters
[    0.336440] [c7] SCSI subsystem initialized
[    0.336885] [c7] usbcore: registered new interface driver usbfs
[    0.337020] [c7] usbcore: registered new interface driver hub
[    0.337275] [c7] usbcore: registered new device driver usb
[    0.343349] [c4] vdd_mif: 700 <--> 1300 mV at 1100 mV
[    0.344524] [c4] vdd_eagle: 800 <--> 1500 mV at 1000 mV
[    0.345684] [c4] vdd_int: 800 <--> 1400 mV at 1000 mV
[    0.346877] [c4] vdd_g3d: 700 <--> 1400 mV at 1000 mV
[    0.348040] [c4] vdd_kfc: 800 <--> 1500 mV at 1025 mV
[    0.349809] [c4] vddf_2v85: 3300 mV
[    0.351113] [c4] vdd_adc: 1800 mV
[    0.352532] [c4] vdd_pll: 1800 mV
[    0.353834] [c4] vdd_ldo6: 1000 mV
[    0.355138] [c4] vdd_ldo7: 1800 mV
[    0.356443] [c4] vdd_ldo8: 1800 mV
[    0.357762] [c4] vdd_ldo9: 3300 mV
[    0.359073] [c4] vdd_ldo10: 1800 mV
[    0.360372] [c4] vdd_ldo11: 1000 mV
[    0.361490] [c4] vdd_ldo13: 1800 <--> 3300 mV at 3300 mV
[    0.362908] [c4] vdd_ldo15: 3300 mV
[    0.364214] [c4] vdd_eth: 3300 mV
[    0.365521] [c4] vdd_ldo18: 1850 mV
[    0.366644] [c4] vdd_ldo19: 2800 <--> 3300 mV at 3300 mV
[    0.367646] [c4] vdd_mifs: 800 <--> 1100 mV at 975 mV
[    0.368958] [c4] vdd_ldo26: 3000 mV
[    0.369953] [c4] vdd_g3ds: 800 <--> 1100 mV at 1000 mV
[    0.371326] [c4] vdd_ldo28: 3300 mV
[    0.374316] [c4] of_get_named_gpio_flags exited with status 177
[    0.374346] [c4] of_get_named_gpio_flags exited with status 178
[    0.375262] [c4] i2c-gpio i2c_gpio.8: using pins 177 (SDA) and 178 (SCL)
[    0.375422] [c4] media: Linux media interface: v0.10
[    0.375527] [c4] Linux video capture interface: v2.00
[    0.377568] [c4] IOVMMU: Created debugfs entry at debugfs/iovmm
[    0.378178] [c4] Advanced Linux Sound Architecture Driver Initialized.
[    0.378820] [c4] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered
[    0.378882] [c4] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung Electronics
[    0.380883] [c4] Loading modules backported from Linux version next-20150222-0-g53e418f1
[    0.380931] [c4] Backport integrated by backports.git backports-20150222-0-g2745ccd
[    0.382805] [c4] Switching to clocksource mct-frc
[    0.460994] [c4] NET: Registered protocol family 2
[    0.462656] [c4] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.463214] [c4] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[    0.465218] [c4] TCP: Hash tables configured (established 8192 bind 8192)
[    0.465355] [c4] TCP: reno registered
[    0.465404] [c4] UDP hash table entries: 512 (order: 3, 40960 bytes)
[    0.465706] [c4] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[    0.466804] [c4] NET: Registered protocol family 1
[    0.467334] [c4] Unpacking initramfs...
[    0.765924] [c4] Freeing initrd memory: 3924K (c2001000 - c23d6000)
[    0.779811] [c4] bounce pool size: 64 pages
[    0.788670] [c4] VFS: Disk quotas dquot_6.5.2
[    0.789060] [c4] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.791947] [c4] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.792495] [c4] msgmni has been set to 1448
[    0.796740] [c4] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.797172] [c4] io scheduler noop registered
[    0.797209] [c4] io scheduler deadline registered
[    0.797456] [c4] io scheduler cfq registered (default)
[    0.808864] [c4] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    0.808914] [c4] dma-pl330 10800000.mdma:    DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    0.814979] [c4] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.815027] [c4] dma-pl330 121a0000.pdma:    DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.820955] [c4] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.821002] [c4] dma-pl330 121b0000.pdma:    DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.824196] [c4] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    0.824245] [c4] dma-pl330 3880000.adma:     DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    0.970469] [c4] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.973356] [c4] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
[    0.974195] [c4] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
[    0.974966] [c4] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
[    2.504330] [c4] console [ttySAC2] enabled
[    2.509100] [c4] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
[    2.519642] [c4] [drm] Initialized drm 1.1.0 20060810
[    2.526534] [c4] of_get_named_gpio_flags exited with status 39
[    2.530094] [c4] PM DOMAIN: spd-gscl0, Device : 13e00000.gsc Registered
[    2.535332] [c4] exynos-drm-gsc 13e00000.gsc: exynos-iommu gpd_dev_ops inserted!
[    2.543062] [c4] exynos-drm-gsc 13e00000.gsc: drm gsc registered successfully.
[    2.550286] [c4] PM DOMAIN: spd-gscl1, Device : 13e10000.gsc Registered
[    2.556495] [c4] exynos-drm-gsc 13e10000.gsc: exynos-iommu gpd_dev_ops inserted!
[    2.564171] [c4] exynos-drm-gsc 13e10000.gsc: drm gsc registered successfully.
[    2.572396] [c4] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
[    2.580202] [c4] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.585844] [c4] [drm] No driver support for vblank timestamp query.
[    2.592184] [c4] exynos-mixer 14450000.mixer: probe start
[    2.597812] [c4] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
[    2.605774] [c4] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
[    2.877512] [c4] Console: switching to colour frame buffer device 240x67
[    2.915303] [c4] exynos-drm exynos-drm: fb0:  frame buffer device
[    2.921315] [c4] exynos-drm exynos-drm: registered panic notifier
[    2.927393] [c4] [drm] Initialized exynos 1.0.0 20110530 on minor 0
[    2.934266] [c4] mali 11800000.mali: Continuing without Mali clock control
[    2.943814] [c4] hrtimer: interrupt took 116833 ns
[    2.948069] [c4] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
[    2.958239] mali 11800000.mali: Probed as mali0
[    2.970130] [c4] loop: module loaded
[    2.973503] [c4] tun: Universal TUN/TAP device driver, 1.6
[    2.977793] [c4] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.988785] [c4] of_get_named_gpio_flags exited with status 48
[    2.988812] [c4] of_get_named_gpio_flags exited with status 37
[    3.191495] [c4] of_get_named_gpio_flags exited with status 17
[    3.191521] [c4] of_get_named_gpio_flags exited with status 36
[    3.393128] [c4] dwc3 12400000.dwc3: dwc3_otg address space is not supported
[    3.399880] [c4] dwc3 12400000.dwc3: Binding gadget dwc3-gadget
[    3.405555] [c4] dwc3 12400000.dwc3: Turn on host
[    3.610510] [c4] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.616153] [c4] ehci-s5p: EHCI s5p driver
[    3.620495] [c4] of_get_named_gpio_flags exited with status 121
[    3.620765] [c4] s5p-ehci 12110000.usb: EHCI Host Controller
[    3.625971] [c4] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    3.633895] [c4] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
[    3.648066] [c4] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    3.654358] [c4] hub 1-0:1.0: USB hub found
[    3.657226] [c4] hub 1-0:1.0: 3 ports detected
[    3.663022] [c4] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.668700] [c4] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller
[    3.674852] [c4] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    3.682960] [c4] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000
[    3.748452] [c4] hub 2-0:1.0: USB hub found
[    3.751257] [c4] hub 2-0:1.0: 3 ports detected
[    3.757336] [c4] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    3.762136] [c4] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[    3.770351] [c4] xhci-hcd xhci-hcd.2.auto: irq 104, io mem 0x12000000
[    3.777324] [c4] xHCI xhci_add_endpoint called for root hub
[    3.777341] [c4] xHCI xhci_check_bandwidth called for root hub
[    3.777620] [c4] hub 3-0:1.0: USB hub found
[    3.780636] [c4] hub 3-0:1.0: 1 port detected
[    3.789712] [c4] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    3.798553] [c4] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[    3.810490] [c4] xHCI xhci_add_endpoint called for root hub
[    3.810507] [c4] xHCI xhci_check_bandwidth called for root hub
[    3.810798] [c4] hub 4-0:1.0: USB hub found
[    3.817858] [c4] hub 4-0:1.0: 1 port detected
[    3.825683] [c4] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    3.834447] [c4] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    3.845601] [c4] xhci-hcd xhci-hcd.5.auto: irq 105, io mem 0x12400000
[    3.855861] [c4] xHCI xhci_add_endpoint called for root hub
[    3.855878] [c4] xHCI xhci_check_bandwidth called for root hub
[    3.856163] [c4] hub 5-0:1.0: USB hub found
[    3.863205] [c4] hub 5-0:1.0: 1 port detected
[    3.870850] [c4] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    3.879512] [c4] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    3.891358] [c4] xHCI xhci_add_endpoint called for root hub
[    3.891375] [c4] xHCI xhci_check_bandwidth called for root hub
[    3.891673] [c4] hub 6-0:1.0: USB hub found
[    3.898539] [c4] hub 6-0:1.0: 1 port detected
[    3.906345] [c4] usbcore: registered new interface driver usb-storage
[    3.915587] [c4] usbcore: registered new interface driver usbserial
[    3.924569] [c4] usbcore: registered new interface driver usbserial_generic
[    3.934112] [c4] usbserial: USB Serial support registered for generic
[    3.943840] [c5] of_get_named_gpio_flags: can't parse gpios property
[    3.943861] [c5] exynos-usb-switch usb-switch.10: host detect gpio is not available
[    3.954032] [c5] of_get_named_gpio_flags: can't parse gpios property
[    3.954051] [c5] exynos-usb-switch usb-switch.10: device detect gpio is not available
[    3.964327] [c5] of_get_named_gpio_flags: can't parse gpios property
[    3.964346] [c5] exynos-usb-switch usb-switch.10: vbus control gpio is not available
[    3.974524] [c5] exynos-usb-switch usb-switch.10: failed to configure pins
[    3.983961] [c5] exynos-usb-switch usb-switch.10: udc device is not available
[    3.993419] [c5] exynos-usb-switch usb-switch.10: Disable device detect IRQ
[    4.023083] [c5] usb cable = 1
[    4.029506] [c5] mousedev: PS/2 mouse device common for all mice
[    4.041388] [c5] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr: enable WTSR
[    4.050140] [c5] s2m-rtc s2m-rtc: s2m_rtc_enable_smpl: enable SMPL
[    4.058994] [c5] s2m_rtc_enable_smpl: WTSR_SMPL(0xc7)
[    4.070610] [c5] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0
[    4.080148] [c5] i2c /dev entries driver
[    4.087573] [c5] IR NEC protocol handler initialized
[    4.094687] [c5] IR RC5(x) protocol handler initialized
[    4.102049] [c5] IR RC6 protocol handler initialized
[    4.109127] [c5] IR JVC protocol handler initialized
[    4.116143] [c5] IR Sony protocol handler initialized
[    4.123254] [c5] IR RC5 (streamzap) protocol handler initialized
[    4.131286] [c5] IR SANYO protocol handler initialized
[    4.138441] [c5] IR MCE Keyboard/mouse protocol handler initialized
[    4.147268] [c5] PM DOMAIN: pd-mfc, Device : 11000000.mfc Registered
[    4.155688] [c5] s5p-mfc 11000000.mfc: exynos-iommu gpd_dev_ops inserted!
[    4.164557] [c5] s5p-mfc 11000000.mfc: s5p_mfc_probe()
[    4.164587] [c5] s5p-mfc 11000000.mfc: of alias get id : mfc-0
[    4.165374] [c5] s5p-mfc 11000000.mfc: decoder registered as /dev/video6
[    4.174474] [c5] s5p-mfc 11000000.mfc: encoder registered as /dev/video7
[    4.183720] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
[    4.194412] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
[    4.205050] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
[    4.215649] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
[    4.226208] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
[    4.236726] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
[    4.248248] [c5] ion_cma ion_mfc_nfw: Alread isolated!
[    4.255236] [c5] s5p_mfc_probe--
[    4.255569] [c5] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics
[    4.265081] [c5] of_get_named_gpio_flags exited with status 38
[    4.265200] [c5] s5p-tvout-cec 101b0000.cec: success request GPIO for hdmi-cec
[    4.274391] s5p-tvout-cec 101b0000.cec: probe successful
[    4.283123] [c5] TRIMINFO[0] = 0x80642e
[    4.288839] [c5] TMU_CONTROL[0] = 0x10609803
[    4.294960] [c5] CURRENT_TEMP[0] = 0x4b
[    4.300627] [c5] THRESHOLD_TEMP_RISE[0] = 0x837e7974
[    4.307455] [c5] THRESHOLD_TEMP_FALL[0] = 0x817c7772
[    4.314240] [c5] INTEN[0] = 0x11111111
[    4.319805] [c5] INTCLEAR[0] = 0x0
[    4.325002] [c5] TRIMINFO[1] = 0x806c33
[    4.330593] [c5] TMU_CONTROL[1] = 0x10609803
[    4.336626] [c5] CURRENT_TEMP[1] = 0x53
[    4.342206] [c5] THRESHOLD_TEMP_RISE[1] = 0x88837e79
[    4.348921] [c5] THRESHOLD_TEMP_FALL[1] = 0x86817c77
[    4.355569] [c5] INTEN[1] = 0x11111111
[    4.361006] [c5] INTCLEAR[1] = 0x0
[    4.366101] [c5] TRIMINFO[2] = 0x806c32
[    4.371581] [c5] TMU_CONTROL[2] = 0x10609803
[    4.377472] [c5] CURRENT_TEMP[2] = 0x4d
[    4.382898] [c5] THRESHOLD_TEMP_RISE[2] = 0x7e79746f
[    4.389496] [c5] THRESHOLD_TEMP_FALL[2] = 0x7c77726d
[    4.396047] [c5] INTEN[2] = 0x11111111
[    4.401368] [c5] INTCLEAR[2] = 0x0
[    4.406308] [c5] TRIMINFO[3] = 0x806529
[    4.411662] [c5] TMU_CONTROL[3] = 0x10609803
[    4.417431] [c5] CURRENT_TEMP[3] = 0x4f
[    4.422781] [c5] THRESHOLD_TEMP_RISE[3] = 0x827d7873
[    4.429297] [c5] THRESHOLD_TEMP_FALL[3] = 0x807b7671
[    4.435766] [c5] INTEN[3] = 0x11111111
[    4.440973] [c5] INTCLEAR[3] = 0x0
[    4.445865] [c5] TRIMINFO[4] = 0x80682d
[    4.451127] [c5] TMU_CONTROL[4] = 0x10609803
[    4.456812] [c5] CURRENT_TEMP[4] = 0x50
[    4.462053] [c5] THRESHOLD_TEMP_RISE[4] = 0x87827d78
[    4.468451] [c5] THRESHOLD_TEMP_FALL[4] = 0x85807b76
[    4.474855] [c5] INTEN[4] = 0x11111111
[    4.479964] [c5] INTCLEAR[4] = 0x0
[    4.486188] [c5] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    4.497634] [c5] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    4.508930] [c5] cpuidle: using governor ladder
[    4.516638] [c5] cpuidle: using governor menu
[    4.518154] [c6] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    4.530856] [c5] Synopsys Designware Multimedia Card Interface Driver
[    4.539864] [c5] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 Addr:13410000.pinctrl Val:3 Num:4
[    4.546569] hub 3-1:1.0: USB hub found
[    4.546931] [c6] hub 3-1:1.0: 2 ports detected
[    4.562769] [c5] of_get_named_gpio_flags exited with status 69
[    4.562815] [c5] dwmmc_exynos 12200000.dwmmc0: dw_mci_parse_dt : emmc h/w reset gpio[69] notifier registered.
[    4.574567] [c5] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller.
[    4.583455] [c5] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030
[    4.591340] dwmmc_exynos 12200000.dwmmc0: Version ID is 250a
[    4.599153] [c6] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo
[    4.628074] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[    4.653246] [c6] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized
[    4.662114] [c6] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 Addr:13410000.pinctrl Val:3 Num:3
[    4.674098] of_get_named_gpio_flags: can't parse gpios property
[    4.674268] [c6] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller.
[    4.683499] [c6] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030
[    4.691758] dwmmc_exynos 12220000.dwmmc2: Version ID is 250a
[    4.693154] [c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35)
[    4.712015] [c7] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo
[    4.724973] [c7] mmc1: vmmc regulator found
[    4.731645] [c7] mmc1: vqmmc regulator found
[    4.748076] [c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53)
[    4.763061] [c7] mmc_host mmc1: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[    4.788235] [c7] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized
[    4.797799] [c7] leds-gpio leds.15: pins are not configured from the driver
[    4.807186] [c7] of_get_named_gpio_flags exited with status 205
[    4.807214] [c7] of_get_named_gpio_flags exited with status 204
[    4.807238] [c7] of_get_named_gpio_flags exited with status 27
[    4.807267] [c7] of_get_named_gpio_flags exited with status 205
[    4.807586] [c7] of_get_named_gpio_flags exited with status 204
[    4.807842] [c7] of_get_named_gpio_flags exited with status 27
[    4.808097] [c5] usb 2-1: new full-speed USB device number 2 using exynos-ohci
[    4.808860] [c7] ledtrig-cpu: registered to indicate activity on CPUs
[    4.808948] [c7] S5P ACE Driver(SLIMSSS), (c) 2013 Samsung Electronics
[    4.810299] [c4] ACE: ecb-aes-s5p-ace
[    4.810749] [c4] ACE: cbc-aes-s5p-ace
[    4.811194] [c4] ACE: ctr-aes-s5p-ace
[    4.811640] [c4] ACE: xts-aes-s5p-ace
[    4.812079] [c4] ACE: sha1-s5p-ace
[    4.812490] [c4] ACE: sha256-s5p-ace
[    4.812501] [c4] ACE driver is initialized
[    4.813145] [c4] hidraw: raw HID events driver (C) Jiri Kosina
[    4.813850] [c4] usbcore: registered new interface driver usbhid
[    4.813856] [c4] usbhid: USB HID core driver
[    4.814757] [c4] exynos-adc 12d10000.adc: operating without regulator vdd[-19]
[    4.815344] [c4] exynos-adc 12d10000.adc: Probed successfully driver.
[    4.816244] [c4] odroid-fan odroid_fan.14: unable to request PWM, trying legacy API
[    4.816390] [c4] pwm-samsung: tin parent at 66600000
[    4.819202] [c4] of_get_named_gpio_flags exited with status 34
[    4.822569] [c4] lpass_register_subip: i2s(de336c10) registered
[    4.958144] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105)
[    5.098683] [c6] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 400000Hz, actual 398325HZ div = 209)
[    5.111553] [c6] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 166500000Hz, actual 166500000HZ div = 0)
[    5.125138] [c0] dwmmc_exynos 12220000.dwmmc2: data CRC error
[    5.137543] [c6] mmc_host mmc1: Tuning error: cmd.error:0, data.error:-84
[    5.150535] [c6] mmc_host mmc1: Tuning error: cmd.error:-84, data.error:-115
[    5.160415] [c6] dwmmc_exynos 12220000.dwmmc2: divratio: 3 map: 0x 00007ffe
[    5.164885] [c5] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/12120000.usb/usb2/2-1/2-1:1.0/input/input0
[    5.166378] [c5] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-12120000.usb-1/input0
[    5.177351] [c5] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/12120000.usb/usb2/2-1/2-1:1.1/input/input1
[    5.179609] [c5] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-12120000.usb-1/input1
[    5.208432] [c5] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/12120000.usb/usb2/2-1/2-1:1.2/input/input2
[    5.211470] [c5] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-12120000.usb-1/input2
[    5.267804] [c6] dwmmc_exynos 12220000.dwmmc2: sample_good: 0x 7ffe best_sample: 0x 07
[    5.279491] [c6] mmc1: new ultra high speed SDR104 SDHC card at address 0007
[    5.291468] [c6] mmcblk0: mmc1:0007 SL32G 28.9 GiB
[    5.302632] [c6]  mmcblk0: p1 p2
[    5.318354] [c5] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    5.328066] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[    5.353748] [c5] usb 6-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[    5.383093] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35)
[    5.448529] [c5] usb 3-1.2: new high-speed USB device number 3 using xhci-hcd
[    5.453130] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53)
[    5.518092] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105)
[    5.823049] [c4] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
: CTL          0x00000089
: FIFO_CTL     0x00200203
: TRAILING_CTL 0x0000000f
: CLK_CTL      0x00000000
: CLK_SLOT     0x00000000
: INT_EN       0x00000000
: INT_STAT     0x00000000
: ERR_STAT     0x00000000
: FIFO_STAT    0x01000002
: TXDATA       0xdeadbeaf
: RXDATA       0x00000000
: CONF         0xb00300ff
: AUTO_CONF    0x00020002
: TIMEOUT      0x000000ff
: MANUAL_CMD   0x00000000
: TRANS_STAT   0x00000000
: TIMING_HS1   0x4b4b4b00
: TIMING_HS2   0x25004b4b
: TIMING_HS3   0x00000096
: TIMING_FS1   0x4b4b4b00
: TIMING_FS2   0x25004b4b
: TIMING_FS3   0x00000096
: TIMING_SLA   0x00000025
: ADDR         0x00004000
[    6.019615] [c4] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
[    7.023050] [c4] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
: CTL          0x00000089
: FIFO_CTL     0x00200203
: TRAILING_CTL 0x0000000f
: CLK_CTL      0x00000000
: CLK_SLOT     0x00000000
: INT_EN       0x00000000
: INT_STAT     0x00000000
: ERR_STAT     0x00000000
: FIFO_STAT    0x01000002
: TXDATA       0xdeadbeaf
: RXDATA       0x00000000
: CONF         0xb00300ff
: AUTO_CONF    0x00020002
: TIMEOUT      0x000000ff
: MANUAL_CMD   0x00000000
: TRANS_STAT   0x00000000
: TIMING_HS1   0x4b4b4b00
: TIMING_HS2   0x25004b4b
: TIMING_HS3   0x00000096
: TIMING_FS1   0x4b4b4b00
: TIMING_FS2   0x25004b4b
: TIMING_FS3   0x00000096
: TIMING_SLA   0x00000025
: ADDR         0x00004000
[    7.195707] [c4] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
[    7.202233] [c4] exynos5-hsi2c 12cb0000.hsi2c: xfer message failed
[    7.209328] [c4] max98090 1-0010: Failed to reset codec: -5
[    7.215772] [c4] max98090 1-0010: Failed to device reset : -5
[    7.222406] [c4] max98090 1-0010: ASoC: failed to probe CODEC -5
[    7.229472] [c4] odroid-audio sound.13: ASoC: failed to instantiate card -5
[    7.237607] [c4] odroid-audio sound.13: snd_soc_register_card() failed(max98090): -5
[    7.247116] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[    7.256039] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[    7.264947] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[    7.273712] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[    7.282466] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[    7.291130] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[    7.300461] [c4] odroid-audio sound.13:  dummy-aif1 <-> samsung-i2s-sec mapping ok
[    7.309540] [c4] odroid-audio sound.13:  dummy-aif2 <-> 3830000.i2s mapping ok
[    7.320578] [c4] Netfilter messages via NETLINK v0.30.
[    7.326941] [c4] arp_tables: (C) 2002 David S. Miller
[    7.332722] [c4] TCP: cubic registered
[    7.337067] [c4] Initializing XFRM netlink socket
[    7.343245] [c4] NET: Registered protocol family 10
[    7.350587] [c4] mip6: Mobile IPv6
[    7.354714] [c4] sit: IPv6 over IPv4 tunneling driver
[    7.362379] [c4] NET: Registered protocol family 17
[    7.368061] [c4] NET: Registered protocol family 15
[    7.373722] [c4] NET: Registered protocol family 35
[    7.379809] [c4] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    7.388738] [c4] Registering SWP/SWPB emulation handler
[    7.394818] [c4] SRAM ASV group [1] : MIF(975000), G3D(1000000)
[    7.407488] [c4] registered taskstats version 1
[    7.413286] [c4] MAIN_DC: disabling
[    7.417679] [c4] regulator-dummy: disabling
[    7.423976] [c5] of_get_named_gpio_flags exited with status 11
[    7.424109] [c5] gpiod_set_debounce: gpio-11 status -22
[    7.424612] [c5] input: gpio_keys.7 as /devices/gpio_keys.7/input/input3
[    7.434982] [c5] s2m-rtc s2m-rtc: setting system clock to 2016-06-28 22:04:59 UTC (1467151499)
[    7.444778] [c5] CPUFREQ of CA7  L0 : 1300000 uV
[    7.450581] [c5] CPUFREQ of CA7  L0 : ABB 8
[    7.455945] [c5] CPUFREQ of CA7  L1 : 1300000 uV
[    7.461754] [c5] CPUFREQ of CA7  L1 : ABB 2
[    7.467095] [c5] CPUFREQ of CA7  L2 : 1262500 uV
[    7.472855] [c5] CPUFREQ of CA7  L2 : ABB 2
[    7.478128] [c5] CPUFREQ of CA7  L3 : 1212500 uV
[    7.483840] [c5] CPUFREQ of CA7  L3 : ABB 2
[    7.489111] [c5] CPUFREQ of CA7  L4 : 1162500 uV
[    7.494824] [c5] CPUFREQ of CA7  L4 : ABB 2
[    7.500112] [c5] CPUFREQ of CA7  L5 : 1125000 uV
[    7.505854] [c5] CPUFREQ of CA7  L5 : ABB 2
[    7.511167] [c5] CPUFREQ of CA7  L6 : 1087500 uV
[    7.516936] [c5] CPUFREQ of CA7  L6 : ABB 2
[    7.522269] [c5] CPUFREQ of CA7  L7 : 1050000 uV
[    7.528038] [c5] CPUFREQ of CA7  L7 : ABB 2
[    7.533368] [c5] CPUFREQ of CA7  L8 : 1012500 uV
[    7.539144] [c5] CPUFREQ of CA7  L8 : ABB 255
[    7.544650] [c5] CPUFREQ of CA7  L9 : 975000 uV
[    7.550345] [c5] CPUFREQ of CA7  L9 : ABB 255
[    7.555863] [c5] CPUFREQ of CA7  L10 : 937500 uV
[    7.561647] [c5] CPUFREQ of CA7  L10 : ABB 255
[    7.567262] [c5] CPUFREQ of CA7  L11 : 900000 uV
[    7.573059] [c5] CPUFREQ of CA7  L11 : ABB 255
[    7.578686] [c5] CPUFREQ of CA7  L12 : 900000 uV
[    7.584485] [c5] CPUFREQ of CA7  L12 : ABB 255
[    7.590121] [c5] CPUFREQ of CA7  L13 : 900000 uV
[    7.595931] [c5] CPUFREQ of CA7  L13 : ABB 255
[    7.601581] [c5] CPUFREQ of CA7  L14 : 900000 uV
[    7.607371] [c5] CPUFREQ of CA7  L14 : ABB 255
[    7.613262] [c5] kfc clock[800000], mx_mspll clock[666000]
[    7.619920] [c5] [SET_EMA_TEST] volt : 887500  value : 0x44
[    7.626686] [c5] [SET_EMA_TEST] volt : 937500  value : 0x44
[    7.633429] [c5] [SET_EMA_TEST] volt : 1032500  value : 0x33
[    7.640220] [c5] [SET_EMA_TEST] volt : 1142500  value : 0x11
[    7.646962] [c5] [SET_EMA_TEST] volt : 1167500  value : 0x11
[    7.653641] [c5] CPUFREQ of CA15 L0 : 1362500 uV
[    7.659288] [c5] CPUFREQ of CA15  L0 : ABB 8
[    7.664575] [c5] CPUFREQ of CA15 L1 : 1362500 uV
[    7.670208] [c5] CPUFREQ of CA15  L1 : ABB 8
[    7.675481] [c5] CPUFREQ of CA15 L2 : 1362500 uV
[    7.681102] [c5] CPUFREQ of CA15  L2 : ABB 8
[    7.686314] [c5] CPUFREQ of CA15 L3 : 1362500 uV
[    7.691873] [c5] CPUFREQ of CA15  L3 : ABB 255
[    7.697197] [c5] CPUFREQ of CA15 L4 : 1312500 uV
[    7.702684] [c5] CPUFREQ of CA15  L4 : ABB 255
[    7.708071] [c5] CPUFREQ of CA15 L5 : 1237500 uV
[    7.713519] [c5] CPUFREQ of CA15  L5 : ABB 255
[    7.718770] [c5] CPUFREQ of CA15 L6 : 1187500 uV
[    7.724179] [c5] CPUFREQ of CA15  L6 : ABB 255
[    7.729394] [c5] CPUFREQ of CA15 L7 : 1150000 uV
[    7.734766] [c5] CPUFREQ of CA15  L7 : ABB 255
[    7.739977] [c5] CPUFREQ of CA15 L8 : 1112500 uV
[    7.745365] [c5] CPUFREQ of CA15  L8 : ABB 255
[    7.750528] [c5] CPUFREQ of CA15 L9 : 1075000 uV
[    7.755820] [c5] CPUFREQ of CA15  L9 : ABB 255
[    7.760894] [c5] CPUFREQ of CA15 L10 : 1050000 uV
[    7.766206] [c5] CPUFREQ of CA15  L10 : ABB 255
[    7.771327] [c5] CPUFREQ of CA15 L11 : 1037500 uV
[    7.776621] [c5] CPUFREQ of CA15  L11 : ABB 255
[    7.781696] [c5] CPUFREQ of CA15 L12 : 1012500 uV
[    7.786890] [c5] CPUFREQ of CA15  L12 : ABB 255
[    7.791839] [c5] CPUFREQ of CA15 L13 : 987500 uV
[    7.796880] [c5] CPUFREQ of CA15  L13 : ABB 255
[    7.801845] [c5] CPUFREQ of CA15 L14 : 962500 uV
[    7.806900] [c5] CPUFREQ of CA15  L14 : ABB 255
[    7.811858] [c5] CPUFREQ of CA15 L15 : 937500 uV
[    7.816920] [c5] CPUFREQ of CA15  L15 : ABB 255
[    7.821890] [c5] CPUFREQ of CA15 L16 : 912500 uV
[    7.826958] [c5] CPUFREQ of CA15  L16 : ABB 255
[    7.831944] [c5] CPUFREQ of CA15 L17 : 900000 uV
[    7.837023] [c5] CPUFREQ of CA15  L17 : ABB 255
[    7.842015] [c5] CPUFREQ of CA15 L18 : 900000 uV
[    7.847092] [c5] CPUFREQ of CA15  L18 : ABB 255
[    7.852097] [c5] CPUFREQ of CA15 L19 : 900000 uV
[    7.857188] [c5] CPUFREQ of CA15  L19 : ABB 255
[    7.862193] [c5] CPUFREQ of CA15 L20 : 900000 uV
[    7.867301] [c5] CPUFREQ of CA15  L20 : ABB 255
[    7.872325] [c5] CPUFREQ of CA15 L21 : 900000 uV
[    7.877433] [c5] CPUFREQ of CA15  L21 : ABB 255
[    7.882458] [c5] CPUFREQ of CA15 L22 : 900000 uV
[    7.887584] [c5] CPUFREQ of CA15  L22 : ABB 255
[    7.892921] [c5] eagle clock[800000], mpll clock[800000]
[    7.903181] [c6] Exynos: Kernel Thermal management registered
[    7.908977] [c7] ### dt-test ### No testcase data in device tree; not running tests
[    7.953790] [c7] MIF 825000Khz ASV is 987500uV
[    7.957884] [c7] DEVFREQ(MIF) : 825000Khz, ABB 14
[    7.962536] [c7] MIF 728000Khz ASV is 950000uV
[    7.966974] [c7] DEVFREQ(MIF) : 728000Khz, ABB 14
[    7.971666] [c7] MIF 633000Khz ASV is 912500uV
[    7.976102] [c7] DEVFREQ(MIF) : 633000Khz, ABB 14
[    7.980806] [c7] MIF 543000Khz ASV is 887500uV
[    7.985226] [c7] DEVFREQ(MIF) : 543000Khz, ABB 14
[    7.989903] [c7] MIF 413000Khz ASV is 825000uV
[    7.994345] [c7] DEVFREQ(MIF) : 413000Khz, ABB 14
[    7.999041] [c7] MIF 275000Khz ASV is 825000uV
[    8.003478] [c7] DEVFREQ(MIF) : 275000Khz, ABB 14
[    8.008184] [c7] MIF 206000Khz ASV is 825000uV
[    8.012570] [c7] DEVFREQ(MIF) : 206000Khz, ABB 14
[    8.017300] [c7] MIF 165000Khz ASV is 825000uV
[    8.021732] [c7] DEVFREQ(MIF) : 165000Khz, ABB 14
[    8.026426] [c7] MIF 138000Khz ASV is 825000uV
[    8.030865] [c7] DEVFREQ(MIF) : 138000Khz, ABB 14
[    8.036840] [c7] MIF: set ASV freq 825000, voltage 987500
[    8.042589] [c7] INT 600000Khz ASV is 975000uV
[    8.046821] [c7] DEVFREQ(INT) : 600000Khz, ABB 255
[    9.052995] [c7] PM DOMAIN: Power off unused power domains.
[    9.058862] [c7] ALSA device list:
[    9.062038] [c7]   #0: odroid-audio
[    9.066645] [c7] Freeing unused kernel memory: 424K (c089c000 - c0906000)
[    9.107761] [c6] systemd-udevd[142]: starting version 215
[   12.872894] [c4] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   13.113190] [c5] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[   13.127202] [c5] systemd[1]: Detected architecture 'arm'.
[   13.164452] [c6] systemd[1]: Set hostname to <odroid-jessie>.
[   13.564063] [c6] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   13.572526] [c6] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   13.580657] [c6] systemd[1]: Expecting device dev-ttySAC2.device...
[   13.598143] [c7] systemd[1]: Starting Remote File Systems (Pre).
[   13.618111] [c7] systemd[1]: Reached target Remote File Systems (Pre).
[   13.624850] [c7] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   13.633663] [c7] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   13.642195] [c7] systemd[1]: Starting Paths.
[   13.658091] [c7] systemd[1]: Reached target Paths.
[   13.663177] [c7] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   13.688123] [c4] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   13.698242] [c4] systemd[1]: Starting Encrypted Volumes.
[   13.718121] [c5] systemd[1]: Reached target Encrypted Volumes.
[   13.724272] [c5] systemd[1]: Starting Swap.
[   13.738121] [c6] systemd[1]: Reached target Swap.
[   13.743167] [c6] systemd[1]: Expecting device dev-mmcblk0p1.device...
[   13.763092] [c6] systemd[1]: Starting Root Slice.
[   13.778084] [c6] systemd[1]: Created slice Root Slice.
[   13.783562] [c6] systemd[1]: Starting User and Session Slice.
[   13.803111] [c7] systemd[1]: Created slice User and Session Slice.
[   13.809639] [c7] systemd[1]: Starting Delayed Shutdown Socket.
[   13.828085] [c7] systemd[1]: Listening on Delayed Shutdown Socket.
[   13.834671] [c7] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   13.853120] [c7] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   13.860965] [c7] systemd[1]: Starting Journal Socket (/dev/log).
[   13.878113] [c4] systemd[1]: Listening on Journal Socket (/dev/log).
[   13.884958] [c4] systemd[1]: Starting udev Control Socket.
[   13.903133] [c5] systemd[1]: Listening on udev Control Socket.
[   13.909480] [c5] systemd[1]: Starting udev Kernel Socket.
[   13.928118] [c6] systemd[1]: Listening on udev Kernel Socket.
[   13.934351] [c6] systemd[1]: Starting Journal Socket.
[   13.953095] [c6] systemd[1]: Listening on Journal Socket.
[   13.958965] [c6] systemd[1]: Starting System Slice.
[   13.978117] [c7] systemd[1]: Created slice System Slice.
[   13.983894] [c7] systemd[1]: Started File System Check on Root Device.
[   13.990875] [c7] systemd[1]: Starting system-systemd\x2dfsck.slice.
[   14.013122] [c4] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   14.020284] [c4] systemd[1]: Starting system-getty.slice.
[   14.038118] [c5] systemd[1]: Created slice system-getty.slice.
[   14.044436] [c5] systemd[1]: Starting system-serial\x2dgetty.slice.
[   14.063117] [c6] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   14.070398] [c6] systemd[1]: Starting Increase datagram queue length...
[   14.090979] [c7] systemd[1]: Starting udev Coldplug all Devices...
[   14.111158] [c7] systemd[1]: Mounting Debug File System...
[   14.162927] [c7] systemd[1]: Starting Load Kernel Modules...
[   14.186045] [c7] systemd[1]: Mounting POSIX Message Queue File System...
[   14.204911] [c4] systemd[1]: Started Set Up Additional Binary Formats.
[   14.212222] [c4] systemd[1]: Mounted Huge Pages File System.
[   14.220467] [c4] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   14.249269] [c5] fuse init (API version 7.22)
[   14.252965] [c4] systemd[1]: Starting Slices.
[   14.268127] [c4] systemd[1]: Reached target Slices.
[   14.288116] [c4] systemd[1]: Mounted POSIX Message Queue File System.
[   14.308107] [c4] systemd[1]: Mounted Debug File System.
[   14.328135] [c4] systemd[1]: Started Increase datagram queue length.
[   14.358143] [c5] systemd[1]: Started Load Kernel Modules.
[   14.383168] [c6] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   14.426993] [c6] systemd[1]: Starting Create Static Device Nodes in /dev...
[   14.451471] [c6] systemd[1]: Starting Apply Kernel Variables...
[   14.471817] [c6] systemd[1]: Mounting Configuration File System...
[   14.491499] [c6] systemd[1]: Mounting FUSE Control File System...
[   14.511465] [c4] systemd[1]: Starting Syslog Socket.
[   14.528242] [c4] systemd[1]: Listening on Syslog Socket.
[   14.534223] [c4] systemd[1]: Starting Journal Service...
[   14.568151] [c4] systemd[1]: Started Journal Service.
[   14.700263] [c4] systemd-udevd[249]: starting version 215
[   15.116888] [c5] [d:0, c:0] s5p_mfc_open:1629: NORMAL instance is opened [0:1]
[   15.126035] [c5] [d:0] s5p_mfc_alloc_firmware:122: Port for DRM F/W : 0xafc00000
[   15.136303] [c5] [d:0] s5p_mfc_init_memctrl:304: [1] Base Address : 10000000
[   15.144653] [c5] [d:0] mfc_init_hw:426: MFC v8.0, F/W: 14yy, 01mm, 13dd (D)
[   15.153130] [c5] [d:0, c:0] s5p_mfc_open:1725: MFC open completed [0:1] dev = dd918810, ctx = dd375800
[   15.163680] [c5] [d:0, c:1] s5p_mfc_open:1629: NORMAL instance is opened [0:2]
[   15.172322] [c4] s3c-i2c 12c60000.i2c: slave address 0x00
[   15.179235] [c0] s3c64xx-spi 12d30000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[   15.179247] [c5] [d:0, c:1] s5p_mfc_open:1725: MFC open completed [0:2] dev = dd918810, ctx = dd376000
[   15.179513] [c5] [d:0, c:1] s5p_mfc_release:1883: MFC driver release is called [0:2], is_drm(0)
[   15.179600] [c5] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:1], dev = dd918810
[   15.179632] [c7] [d:0, c:0] s5p_mfc_release:1883: MFC driver release is called [0:1], is_drm(0)
[   15.179798] [c7] s5p_mfc_dev_release:1801: power off
[   15.180493] [c7] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:0], dev = dd918810
[   15.257229] [c4] s3c64xx-spi 12d30000.spi: number of chip select lines not specified, assuming 1 chip select line
[   15.264840] [c5] i2c-core: driver [INA231] using legacy suspend method
[   15.264847] [c5] i2c-core: driver [INA231] using legacy resume method
[   15.266403] [c7] INA231 3-0040: I2C write error: (-6) reg: 0x0
[   15.266409] [c7] INA231 3-0040: ============= Probe INA231 Fail! : sensor_arm (0xFFFFFFFA) =============
[   15.276608] [c7] INA231 3-0041: I2C write error: (-6) reg: 0x0
[   15.276621] [c7] INA231 3-0041: ============= Probe INA231 Fail! : sensor_mem (0xFFFFFFFA) =============
[   15.283509] [c7] INA231 3-0044: I2C write error: (-6) reg: 0x0
[   15.283518] [c7] INA231 3-0044: ============= Probe INA231 Fail! : sensor_g3d (0xFFFFFFFA) =============
[   15.289400] [c7] INA231 3-0045: I2C write error: (-6) reg: 0x0
[   15.289410] [c7] INA231 3-0045: ============= Probe INA231 Fail! : sensor_kfc (0xFFFFFFFA) =============
[   15.289511] [c7] s3c-i2c 12c60000.i2c: i2c-3: S3C I2C adapter
[   15.290070] [c7] s3c-i2c 12c70000.i2c: slave address 0x00
[   15.291000] [c7] s3c-i2c 12c70000.i2c: i2c-4: S3C I2C adapter
[   15.369171] [c4] of_get_named_gpio_flags exited with status 190
[   15.371958] [c5] PM DOMAIN: pd-isp, Device : 131a0000.spi Registered
[   15.380247] [c5] s3c64xx-spi 131a0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[   15.391263] [c5] s3c64xx-spi 131a0000.spi: number of chip select lines not specified, assuming 1 chip select line
[   15.404718] [c4] PM DOMAIN: pd-isp, Device : 131b0000.spi Registered
[   15.412524] [c4] s3c64xx-spi 131b0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[   15.423899] [c4] s3c64xx-spi 131b0000.spi: number of chip select lines not specified, assuming 1 chip select line
[   15.880015] [c3] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[   16.020703] [c5] usbcore: registered new interface driver r8152
[   16.037559] [c4] usbcore: registered new interface driver cdc_ether
[   16.179802] [c5] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[   16.198417] [c5] usb 6-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[   16.211477] [c5] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd9c4180
[   16.221846] [c5] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd9c41ac
[   16.232102] [c5] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd9c41d8
[   16.331129] [c5] r8152 6-1:1.0 eth0: v2.06.0 (2016/01/14)
[   16.337683] [c5] r8152 6-1:1.0 eth0: This product is covered by one or more of the following patents:
        US6,570,884, US6,115,776, and US6,327,625.

[   16.784764] [c7] systemd-journald[248]: Received request to flush runtime journal from PID 1
[   17.131792] [c4] RTL871X: module init start
[   17.137032] [c4] RTL871X: rtl8812au v4.2.5_10143.20140103_ASUS
[   17.143934] [c4] RTL871X: build time: May 13 2016 14:16:26
[   17.150682] [c4] RTL871X:
usb_endpoint_descriptor(0):
[   17.161091] [c4] RTL871X: bLength=7
[   17.165611] [c4] RTL871X: bDescriptorType=5
[   17.172205] [c4] RTL871X: bEndpointAddress=81
[   17.178957] [c4] RTL871X: wMaxPacketSize=512
[   17.184214] [c4] RTL871X: bInterval=0
[   17.188842] [c4] RTL871X: RT_usb_endpoint_is_bulk_in = 1
[   17.195108] [c4] RTL871X:
usb_endpoint_descriptor(1):
[   17.205032] [c4] RTL871X: bLength=7
[   17.209518] [c4] RTL871X: bDescriptorType=5
[   17.214609] [c4] RTL871X: bEndpointAddress=2
[   17.219780] [c4] RTL871X: wMaxPacketSize=512
[   17.224981] [c4] RTL871X: bInterval=0
[   17.229542] [c4] RTL871X: RT_usb_endpoint_is_bulk_out = 2
[   17.235847] [c4] RTL871X:
usb_endpoint_descriptor(2):
[   17.245517] [c4] RTL871X: bLength=7
[   17.249856] [c4] RTL871X: bDescriptorType=5
[   17.254863] [c4] RTL871X: bEndpointAddress=3
[   17.259936] [c4] RTL871X: wMaxPacketSize=512
[   17.264989] [c4] RTL871X: bInterval=0
[   17.269413] [c4] RTL871X: RT_usb_endpoint_is_bulk_out = 3
[   17.275567] [c4] RTL871X:
usb_endpoint_descriptor(3):
[   17.284910] [c4] RTL871X: bLength=7
[   17.289051] [c4] RTL871X: bDescriptorType=5
[   17.293871] [c4] RTL871X: bEndpointAddress=4
[   17.298760] [c4] RTL871X: wMaxPacketSize=512
[   17.303619] [c4] RTL871X: bInterval=0
[   17.307781] [c4] RTL871X: RT_usb_endpoint_is_bulk_out = 4
[   17.313687] [c4] RTL871X:
usb_endpoint_descriptor(4):
[   17.322641] [c4] RTL871X: bLength=7
[   17.326601] [c4] RTL871X: bDescriptorType=5
[   17.331230] [c4] RTL871X: bEndpointAddress=85
[   17.336004] [c4] RTL871X: wMaxPacketSize=64
[   17.340573] [c4] RTL871X: bInterval=1
[   17.344594] [c4] RTL871X: RT_usb_endpoint_is_int_in = 5, Interval = 1
[   17.351391] [c4] RTL871X: nr_endpoint=5, in_num=2, out_num=3

[   17.360588] [c4] RTL871X: USB_SPEED_HIGH
[   17.364867] [c4] RTL871X: CHIP TYPE: RTL8812
[   17.369477] [c4] RTL871X: register rtw_netdev_ops to netdev_ops
[   17.375968] [c4] RTL871X: ReadChipVersion8812A SYS_CFG(0xF0)=0x04411137
[   17.383111] [c4] RTL871X: Chip Version Info: CHIP_8812_Normal_Chip_TSMC_C_CUT_2T2R_RomVer(0)
[   17.391842] [c4] RTL871X: RF_Type is 2!!
[   17.396022] [c4] RTL871X: _ConfigChipOutEP_8812 OutEpQueueSel(0x07), OutEpNumber(3)
[   17.404023] [c4] RTL871X: ====> ReadAdapterInfo8812AU
[   17.409392] [c4] RTL871X: Boot from EFUSE, Autoload OK !
[   17.568363] [c7] RTL871X: EEPROM ID=0x8129
[   17.572626] [c7] RTL871X: VID = 0x2357, PID = 0x0101
[   17.577817] [c7] RTL871X: Customer ID: 0x00, SubCustomer ID: 0xCD
[   17.584113] [c7] RTL871X: hal_ReadMACAddress_8812AU MAC Address from EFUSE = ec:08:6b:08:76:48
[   17.592941] [c7] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[   17.601662] [c7] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[   17.610389] [c7] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[   17.619092] [c7] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[   17.627737] [c7] RTL871X: EEPROMRegulatory = 0x1 TxPwrCalibrateRate=0x0
[   17.634491] [c7] RTL871X: Board Type: 0x 0
[   17.638692] [c7] RTL871X: mlmepriv.ChannelPlan = 0x7f
[   17.643861] [c7] RTL871X: CrystalCap: 0x1b
[   17.648023] [c7] RTL871X: ThermalMeter = 0x1c
[   17.652371] [c7] RTL871X: SWAS: bHwAntDiv = 0, TRxAntDivType = 3
[   17.658427] [c7] RTL871X: pHalData->PAType_2G is 0x3, pHalData->ExternalPA_2G = 0
[   17.665976] [c7] RTL871X: pHalData->PAType_5G is 0x3, pHalData->ExternalPA_5G = 1
[   17.673520] [c7] RTL871X: pHalData->LNAType_2G is 0x0, pHalData->ExternalLNA_2G = 0
[   17.681244] [c7] RTL871X: pHalData->LNAType_5G is 0x88, pHalData->ExternalLNA_5G = 1
[   17.689047] [c7] RTL871X: pHalData->TypeGPA = 0x0
[   17.693816] [c7] RTL871X: pHalData->TypeAPA = 0x0
[   17.698582] [c7] RTL871X: pHalData->TypeGLNA = 0x0
[   17.703435] [c7] RTL871X: pHalData->TypeALNA = 0x0
[   17.708277] [c7] RTL871X: RFE Type: 0x 0
[   17.712191] [c7] RTL871X: PID= 0x101, VID=  2357
[   17.716847] [c7] RTL871X: PID= 0x101, VID=  2357
[   17.721496] [c7] RTL871X: Customer ID: 0x 0
[   17.727822] [c7] RTL871X: ReadAdapterInfo8812AU <====
[   17.733133] [c7] RTL871X: init_channel_set ChannelPlan ID 7f Chan num:38
[   17.740631] [c7] RTL871X: can't get autopm:
[   17.744992] [c7] RTL871X: rtw_macaddr_cfg MAC Address  = ec:08:6b:08:76:48
[   17.751979] [c7] RTL871X: bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[   17.760390] [c7] RTL871X: rtw_ndev_init(wlan0)
[   17.765939] [c7] RTL871X: _rtw_drv_register_netdev, MAC Address (if1) = ec:08:6b:08:76:48
[   17.774397] [c7] usbcore: registered new interface driver rtl8812au
[   17.780848] [c7] RTL871X: module init ret=0
[   18.031260] [c6] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.191309] [c7] cfg80211: Calling CRDA to update world regulatory domain
[   20.249750] [c5] cfg80211: World regulatory domain updated:
[   20.255722] [c5] cfg80211:  DFS Master region: unset
[   20.259145] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.270859] [c5] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.279681] [c5] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.289277] [c5] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.298913] [c5] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   20.310036] [c5] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   20.320714] [c5] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   20.329566] [c5] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   20.338381] [c5] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   20.894627] [c4] RTL871X: LeaveAllPowerSaveMode(wlan0): bup=0 Skip!
[   20.899539] [c4] RTL871X: rtw_wx_set_scan: bDriverStopped=1, bup=0, hw_init_completed=0
[   20.912169] [c4] RTL871X: +871x_drv - drv_open, bup=0
[   20.916395] [c4] RTL871X:  power-on :REG_SYS_CLKR 0x09=0xfc. REG_CR 0x100=0xff.
[   20.923143] [c4] RTL871X:  MAC has already power on.
[   20.932106] [c4] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[   21.016135] [c6] RTL871X: FirmwareDownload8812 fw source from Header
[   21.021176] [c6] RTL871X: FirmwareDownload8812 fw:NIC, size: 32060
[   21.027278] [c6] RTL871X: FirmwareDownload8812: fw_ver=25 fw_subver=0 sig=0x9501
[   21.035944] [c6] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   21.089055] [c6] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070705
[   21.098058] [c6] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   21.128672] [c6] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (254, 35ms), REG_MCUFWDL:0x000707c6
[   21.136318] [c6] RTL871X: FWDL success. write_fw:1, 90ms
[   21.141622] [c6] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[   21.166025] [c6] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 1
[   21.171915] [c6] RTL871X: PHY_ConfigRFWithPowerLimitTableParaFile(): No File rtl8812A/TXPWR_LMT.txt, Load from HWImg Array!
[   21.200991] [c6] RTL871X: phy_ConfigBBWithPgParaFile(): No File rtl8812A/PHY_REG_PG.txt, Load from HWImg Array!
[   21.581030] [c4] RTL871X: pDM_Odm TxPowerTrackControl = 1
[   21.586249] [c4] RTL871X: MAC Address from REG_MACID = ec:08:6b:08:76:48
[   21.591695] [c4] RTL871X: rtl8812au_hal_init in 675ms
[   21.597068] [c4] RTL871X: hw_var_set_opmode()-5243 mode = 1
[   21.602698] [c4] RTL871X: MAC Address = ec:08:6b:08:76:48
[   21.608034] [c5] RTL871X: -871x_drv - drv_open, bup=1
[   21.612761] [c5] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.542618] [c7] RTL871X: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[   22.546953] [c7] RTL871X: set_mode = IW_MODE_INFRA
[   22.552163] [c7] RTL871X: set bssid:00:00:00:00:00:00
[   22.552792] [c5] RTL871X: hw_var_set_opmode()-5243 mode = 2
[   22.562798] [c5] RTL871X: =>rtw_wx_set_essid
[   22.566614] [c5] RTL871X: ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)ͺ\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9fɚ, len=32
[   22.573175] [c5] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)ͺ\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9fɚ\xffffffcc/\xffffffbf\xffffff98܌\xffffff90o\xffffffc0\xffffff8b] fw_state=0x00000008
[   22.582475] [c5] RTL871X: Set SSID under fw_state=0x00000008
[   22.588325] [c5] RTL871X: <=rtw_wx_set_essid, ret 0
[   22.663448] [c5] RTL871X: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[   28.260307] [c5] RTL871X: survey done event(27) band:0 for wlan0
[   28.264946] [c5] RTL871X: rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
[   28.273755] [c5] RTL871X: try_to_join, but select scanning queue fail, to_roam:0
[   28.281126] [c5] RTL871X: indicate disassoc
[   28.285502] [c7] RTL871X: rtw_indicate_scan_done(wlan0)
[   28.290690] [c7] RTL871X: rtl8812_set_FwJoinBssReport_cmd mstatus(0)
[   28.296881] [c7] RTL871X: beamforming_deinit_entry Idx 0
[   28.302148] [c7] RTL871X: beamforming_notify BeamformState 0 bSounding 0
[   28.315019] [c4] RTL871X: ==>rtw_ps_processor .fw_state(8)
[   28.319113] [c4] RTL871X: ==>ips_enter cnts:1
[   28.323432] [c4] RTL871X: nolinked power save enter
[   28.328301] [c4] RTL871X: ===> rtw_ips_pwr_down...................
[   28.334454] [c4] RTL871X: ====> rtw_ips_dev_unload...
[   28.351354] [c4] RTL871X: usb_read_port_cancel
[   28.354557] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.354616] [c6] RTL871X: wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
[   28.354627] [c6] RTL871X: _rtw_pwr_wakeup wait ps_processing...
[   28.377448] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.388475] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.399474] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.410570] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.421523] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.432536] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.443609] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.454520] [c4] RTL871X: usb_write_port_cancel
[   28.459284] [c4] RTL871X: ==> rtl8812au_hal_deinit
[   28.464860] [c4] RTL871X:  hal_poweroff_8812au
[   28.471801] [c4] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   28.481296] [c4] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[   28.485621] [c4] RTL871X: <=== rtw_ips_pwr_down..................... in 155ms
[   28.503134] [c4] RTL871X: _rtw_pwr_wakeup wait ps_processing done
[   28.507747] [c4] RTL871X: _rtw_pwr_wakeup call ips_leave....
[   28.513460] [c4] RTL871X: ==>ips_leave cnts:1
[   28.517724] [c4] RTL871X: ===>  rtw_ips_pwr_up..............
[   28.523457] [c4] RTL871X: ===> ips_netdrv_open.........
[   28.528841] [c4] RTL871X:  power-on :REG_SYS_CLKR 0x09=0xb0. REG_CR 0x100=0xea.
[   28.535932] [c4] RTL871X:  MAC has not been powered on yet.
[   28.545241] [c4] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[   28.620891] [c4] RTL871X: FirmwareDownload8812 fw source from Header
[   28.625848] [c4] RTL871X: FirmwareDownload8812 fw:NIC, size: 32060
[   28.631988] [c4] RTL871X: FirmwareDownload8812: fw_ver=25 fw_subver=0 sig=0x9501
[   28.686947] [c4] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070705
[   28.695763] [c4] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   28.726476] [c4] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (231, 30ms), REG_MCUFWDL:0x000707c6
[   28.734126] [c4] RTL871X: FWDL success. write_fw:1, 95ms
[   28.739413] [c4] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[   28.765526] [c4] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 1
[   28.771388] [c4] RTL871X: PHY_ConfigRFWithPowerLimitTableParaFile(): No File rtl8812A/TXPWR_LMT.txt, Load from HWImg Array!
[   28.804080] [c4] RTL871X: phy_ConfigBBWithPgParaFile(): No File rtl8812A/PHY_REG_PG.txt, Load from HWImg Array!
[   29.153982] [c5] RTL871X: pDM_Odm TxPowerTrackControl = 1
[   29.159244] [c5] RTL871X: MAC Address from REG_MACID = ec:08:6b:08:76:48
[   29.164668] [c5] RTL871X: rtl8812au_hal_init in 635ms
[   29.170005] [c5] RTL871X: hw_var_set_opmode()-5243 mode = 1
[   29.175673] [c5] RTL871X: <===  rtw_ips_pwr_up.............. in 660ms
[   29.181664] [c5] RTL871X: nolinked power save leave
[   29.186608] [c5] RTL871X: ==> ips_leave.....LED(0x00282828)...
[   29.192341] [c5] RTL871X: set_mode = IW_MODE_INFRA
[   29.197278] [c5] RTL871X:
 wpa_ie(length:22):
[   29.197881] [c4] RTL871X: hw_var_set_opmode()-5243 mode = 2
[   29.208482] [c5] RTL871X: 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
[   29.214644] [c5] RTL871X: 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
[   29.220799] [c5] RTL871X: 0x00 0x0f 0xac 0x02 0x00 0x00 0x9c 0xdd
[   29.227359] [c5] RTL871X: SetHwReg8812A, 5992, RCR= f40060ca
[   29.232852] [c5] RTL871X: =>rtw_wx_set_essid
[   29.236867] [c5] RTL871X: ssid=blub, len=4
[   29.241040] [c5] RTL871X: set ssid [blub] fw_state=0x00000008
[   29.246686] [c5] RTL871X: Set SSID under fw_state=0x00000008
[   29.252281] [c5] RTL871X: [by_bssid:0][assoc_ssid:blub][to_roam:0] new candidate: blub(14:91:82:2e:1d:3e, ch6) rssi:-63
[   29.263041] [c5] RTL871X: rtw_select_and_join_from_scanned_queue: candidate: blub(14:91:82:2e:1d:3e, ch:6)
[   29.272672] [c5] RTL871X: [HT] Support LDPC = 0x03
[   29.277430] [c5] RTL871X: [HT] Support STBC = 0x01
[   29.282200] [c5] RTL871X: [HT] Support Beamformee
[   29.286887] [c5] RTL871X: declare supporting RX STBC
[   29.291835] [c5] RTL871X: [VHT] Support LDPC = 0x03
[   29.296692] [c5] RTL871X: [VHT] Support STBC = 0x03
[   29.301551] [c5] RTL871X: [VHT] Support Beamformee
[   29.306325] [c5] RTL871X: link to Marvell AP
[   29.310607] [c6] RTL871X: set HT ch/bw before connected
[   29.310740] [c5] RTL871X: <=rtw_wx_set_essid, ret 0
[   29.311343] [c5] RTL871X: set bssid:14:91:82:2e:1d:3e
[   29.311352] [c5] RTL871X: Set BSSID under fw_state=0x00000088
[   29.331446] [c6] RTL871X: start_join_set_ch_bw: ch=6, bwmode=1, ch_offset=2
[   29.401287] [c6] RTL871X: == IQK Start ==
[   29.453769] [c0] RTL871X: == IQK Finish ==
[   29.490653] [c0] RTL871X: link to Marvell AP
[   29.493482] [c0] RTL871X: start auth
[   29.497080] [c0] RTL871X: issue_auth
[   29.522722] [c0] RTL871X: OnAuthClient
[   29.525011] [c0] RTL871X: auth success, start assoc
[   29.529934] [c0] RTL871X: network.SupportedRates[0]=82
[   29.534988] [c0] RTL871X: network.SupportedRates[1]=84
[   29.540162] [c0] RTL871X: network.SupportedRates[2]=8B
[   29.545264] [c0] RTL871X: network.SupportedRates[3]=96
[   29.550346] [c0] RTL871X: network.SupportedRates[4]=0C
[   29.555591] [c0] RTL871X: network.SupportedRates[5]=12
[   29.560712] [c0] RTL871X: network.SupportedRates[6]=18
[   29.565851] [c0] RTL871X: network.SupportedRates[7]=24
[   29.571002] [c0] RTL871X: network.SupportedRates[8]=30
[   29.576065] [c0] RTL871X: network.SupportedRates[9]=48
[   29.581211] [c0] RTL871X: network.SupportedRates[10]=60
[   29.586380] [c0] RTL871X: network.SupportedRates[11]=6C
[   29.591613] [c0] RTL871X: bssrate_len = 12
[   29.625192] [c0] RTL871X: OnAssocRsp
[   29.627459] [c0] RTL871X: Current VHT LDPC Setting = 0A
[   29.632578] [c0] RTL871X: Current ShortGI80MHz = 1
[   29.637442] [c0] RTL871X: Current VHT STBC Setting = 0A
[   29.642564] [c0] RTL871X: Current VHT Beamforming Setting = 01
[   29.648412] [c0] RTL871X: report_join_res(2)
[   29.652559] [c0] RTL871X: rtw_joinbss_update_network
[   29.657566] [c0] RTL871X: +rtw_update_ht_cap()
[   29.662064] [c0] RTL871X: rtw_alloc_macid = 0
[   29.666344] [c0] RTL871X: rtw_joinbss_update_stainfo
[   29.671321] [c0] RTL871X: ### Set STA_(0) info
[   29.675701] [c0] RTL871X: assoc success
[   29.680281] [c0] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   29.686613] [c6] RTL871X: WMM(0): 0, a425
[   29.690500] [c6] RTL871X: WMM(1): 0, a449
[   29.691141] [c5] RTL871X: send eapol packet
[   29.698634] [c6] RTL871X: WMM(2): 0, 5e431c
[   29.699661] [c5] RTL871X: send eapol packet
[   29.699757] [c5] RTL871X:  ~~~~set sta key:unicastkey
[   29.699961] [c5] RTL871X:  ~~~~set sta key:groupkey
[   29.699971] [c5] RTL871X: ==> rtw_set_key algorithm(2),keyid(1),key_mask(0)
[   29.723762] [c6] RTL871X: WMM(3): 0, 2f321c
[   29.727682] [c6] RTL871X: wmm_para_seq(0): 0
[   29.732004] [c6] RTL871X: wmm_para_seq(1): 1
[   29.736270] [c6] RTL871X: wmm_para_seq(2): 2
[   29.740524] [c6] RTL871X: wmm_para_seq(3): 3
[   29.744774] [c6] RTL871X: HTOnAssocRsp
[   29.748770] [c6] RTL871X: VHTOnAssocRsp
[   29.752364] [c6] RTL871X: UpdateHalRAMask8812A => mac_id:0, networkType:0x43, mask:0xffffffff
     ==> rssi_level:0, rate_bitmap:0x0fffffff
[   29.767116] [c6] RTL871X: [MacId],  Set MacId Ctrl(original) = 0x10000
[   29.774616] [c6] RTL871X: rtl8812_set_FwJoinBssReport_cmd mstatus(1)
[   29.781295] [c6] RTL871X: SetFwRsvdPagePkt_8812: Set RSVD page location to Fw ,TotalPacketLen(2048), TotalPageNum(4)
[   29.791506] [c6] RTL871X: wlan0: 1 DL RSVD page success! DLBcnCount:1, poll:1
[   29.798506] [c6] RTL871X: Set RSVD page location to Fw.
[   29.802747] [c6] RTL871X: Beamforming Config Capability = 0x08
[   29.808550] [c6] RTL871X: beamforming_init_entry Idx 0
[   29.820506] [c6] RTL871X: beamforming_notify BeamformState 0 bSounding 0
[   29.825804] [c6] RTL871X: beamforming_enter Idx 0
[   29.830491] [c6] RTL871X: =>mlmeext_joinbss_event_callback
[   29.837504] [c6] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
[   29.844720] [c6] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
[   29.856256] [c5] RTL871X: SetHwReg8812A, 5985, RCR= f40060ce
[   31.189258] [c5] RTL871X: UpdateHalRAMask8812A => mac_id:0, networkType:0x43, mask:0xffffffff
     ==> rssi_level:2, rate_bitmap:0x0fffffff
[   35.189528] [c5] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[   35.202819] [c5] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[   40.869113] [c2] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_SPECIAL_PACKET
[   40.877138] [c2] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[   52.897158] [c0] RTL871X: survey done event(1c) band:0 for wlan0
[   52.902630] [c0] RTL871X: wlan0 cmd=18, process_time=1110 > 1 sec
[   52.909983] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
[   57.243936] [c1] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[   57.251182] [c1] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[   59.866862] [c3] set_aud_pll_rate[49] : aud_pll set_rate=180633600, get_rate = 180633609
[   59.914672] [c7] set_aud_pll_rate[49] : aud_pll set_rate=180633600, get_rate = 180633609
[   70.257429] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_LEAVE
[   70.265217] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[   73.284513] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[   73.292407] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[   89.034487] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_LEAVE
[   89.041828] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[   94.462995] [c0] RTL871X: survey done event(12) band:0 for wlan0
[   94.467906] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
[   94.609293] [c0] RTL871X: OnAction_back
[   94.611829] [c0] RTL871X: OnAction_back, action=0
[   94.616413] [c0] RTL871X: issue_action_BA, category=3, action=1, status=0
[   99.078424] [c0] RTL871X: rtw_issue_addbareq_cmd, p=0
[   99.082239] [c0] RTL871X: issue_action_BA, category=3, action=0, status=0
[   99.089044] [c0] RTL871X: BA_starting_seqctrl = 238 for TID=0
[   99.101916] [c0] RTL871X: OnAction_back
[   99.104398] [c0] RTL871X: OnAction_back, action=1
[   99.108996] [c0] RTL871X: agg_enable for TID=0
[   99.113433] [c0] RTL871X: Drop duplicate management frame with seq_num = 1666.
[  100.289086] [c0] RTL871X: rtw_issue_addbareq_cmd, p=4
[  100.292808] [c1] RTL871X: issue_action_BA, category=3, action=0, status=4
[  100.299600] [c1] RTL871X: BA_starting_seqctrl = 6 for TID=4
[  100.307928] [c0] RTL871X: OnAction_back
[  100.310529] [c0] RTL871X: OnAction_back, action=1
[  100.315156] [c0] RTL871X: agg_enable for TID=4
[  100.319631] [c0] RTL871X: Drop duplicate management frame with seq_num = 1679.
[  153.063099] [c0] RTL871X: wlan0 cmd=18, process_time=1030 > 1 sec
[  159.007818] [c0] RTL871X: issue_nulldata(wlan0) to 14:91:82:2e:1d:3e, ch:6, 3/3 in 1030 ms
[  159.015729] [c0] RTL871X: survey done event(17) band:0 for wlan0
[  159.021101] [c0] RTL871X: wlan0 cmd=18, process_time=1080 > 1 sec
[  159.030646] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
[  227.670259] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  227.677341] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  231.680257] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-TRAFFIC_BUSY
[  231.687348] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[  240.439236] [c1] RTL871X: survey done event(1c) band:0 for wlan0
[  240.444435] [c1] RTL871X: rtw_indicate_scan_done(wlan0)
[  245.715378] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  245.722430] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  247.720375] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-TRAFFIC_BUSY
[  247.727432] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[  249.725626] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  249.732930] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  251.730516] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-TRAFFIC_BUSY
[  251.737594] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[  253.735508] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  253.742588] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  255.740403] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  257.745380] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  259.750407] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  261.755420] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  263.760388] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  265.765522] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  267.770525] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  267.862549] [c0] RTL871X: issue_nulldata(wlan0) to 14:91:82:2e:1d:3e, ch:6, 3/3 in 85 ms
[  273.785512] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  275.790534] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  277.795516] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  279.800518] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  281.805514] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  283.810639] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  283.896091] [c0] RTL871X: issue_nulldata(wlan0) to 14:91:82:2e:1d:3e, ch:6, 3/3 in 80 ms
[  289.825633] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  291.830653] [c1] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  293.835866] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  295.840767] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  297.845763] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  299.850770] [c2] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  303.860899] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  305.865773] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  307.870916] [c1] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  309.875893] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  311.880895] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  313.885887] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  315.891118] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  319.900876] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  321.906010] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  323.910990] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  325.916002] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  327.921013] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  329.926008] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  331.930999] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  335.941131] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  337.946139] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  338.033871] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_LEAVE
[  338.041448] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[  342.936732] [c0] RTL871X: survey done event(18) band:0 for wlan0
[  342.941880] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
[  343.961252] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  343.968668] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  347.971125] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  348.081706] [c0] RTL871X: issue_nulldata(wlan0) to 14:91:82:2e:1d:3e, ch:6, 3/3 in 105 ms
[  353.986250] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  355.991269] [c3] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  357.996262] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  360.001275] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  362.006374] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  364.011381] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  368.021367] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  370.026379] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  372.031376] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  374.036385] [c1] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[    0.000000] [c0] Booting Linux on physical CPU 0x100
[    0.000000] [c0] Initializing cgroup subsys cpuset
[    0.000000] [c0] Initializing cgroup subsys cpu
[    0.000000] [c0] Initializing cgroup subsys cpuacct
[    0.000000] [c0] Linux version 3.10.96+ (root@odroid-wheezy) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP PREEMPT Fri May 13 14:06:12 CEST 2016
[    0.000000] [c0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] [c0] Machine: ODROID-XU3, model: Hardkernel odroid-xu3 board based on EXYNOS5422
[    0.000000] [c0] ION: Contiguous 0x6650000 bytes @ 0x0 defined for 0:common
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 2:mfc_sh
[    0.000000] [c0] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd
[    0.000000] [c0] ION: Contiguous 0x6000000 bytes @ 0x0 defined for 11:video
[    0.000000] [c0] ION: Contiguous 0x1000000 bytes @ 0x0 defined for 7:mfc_input
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 9:sectbl
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 8:mfc_fw
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 12:mfc_nfw
[    0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 13:secdma
[    0.000000] [c0] cma: CMA: reserved 104 MiB at b8000000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at b7c00000
[    0.000000] [c0] cma: CMA: reserved 8 MiB at b7400000
[    0.000000] [c0] cma: CMA: reserved 96 MiB at b1400000
[    0.000000] [c0] cma: CMA: reserved 16 MiB at b0400000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at b0000000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at afc00000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at af800000
[    0.000000] [c0] cma: CMA: reserved 4 MiB at af400000
[    0.000000] [c0] cma: CMA: reserved 256 MiB at 5f800000
[    0.000000] [c0] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] [c0] create_mapping_memory: section: 40000000 ~ 6f800000
[    0.000000] [c0] CPU EXYNOS5422 (id 0xe5422001)
[    0.000000] [c0] On node 0 totalpages: 518656
[    0.000000] [c0] free_area_init_node: node 0, pgdat c0977400, node_mem_map c0de6000
[    0.000000] [c0]   Normal zone: 1520 pages used for memmap
[    0.000000] [c0]   Normal zone: 0 pages reserved
[    0.000000] [c0]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000] [c0]   HighMem zone: 2532 pages used for memmap
[    0.000000] [c0]   HighMem zone: 324096 pages, LIFO batch:31
[    0.000000] [c0] PERCPU: Embedded 9 pages/cpu @c1df4000 s14912 r8192 d13760 u36864
[    0.000000] [c0] pcpu-alloc: s14912 r8192 d13760 u36864 alloc=9*4096
[    0.000000] [c0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] [c0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517136
[    0.000000] [c0] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=00:1e:06:61:7a:81 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi
[    0.000000] [c0] hdmi: using HDMI Mode
[    0.000000] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] [c0] allocated 4149248 bytes of page_cgroup
[    0.000000] [c0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] [c0] Memory: 2026MB = 2026MB total
[    0.000000] [c0] Memory: 1522276k/1522276k available, 552348k reserved, 1046528K highmem
[    0.000000] [c0] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc089bffc   (8784 kB)
      .init : 0xc089c000 - 0xc0906a40   ( 427 kB)
      .data : 0xc0908000 - 0xc097b70c   ( 462 kB)
       .bss : 0xc097b70c - 0xc0de53a4   (4520 kB)
[    0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] [c0] Preemptible hierarchical RCU implementation.
[    0.000000] [c0] NR_IRQS:16 nr_irqs:16 16
[    0.000000] [c0] apll 800000000
[    0.000000] [c0] bpll 825000000
[    0.000000] [c0] cpll 666000000
[    0.000000] [c0] dpll 600000000
[    0.000000] [c0] epll 180633609
[    0.000000] [c0] rpll 66000000
[    0.000000] [c0] ipll 432000000
[    0.000000] [c0] spll 800000000
[    0.000000] [c0] dout_spll_ctrl_div2 400000000
[    0.000000] [c0] vpll 400000000
[    0.000000] [c0] mpll 532000000
[    0.000000] [c0] Clock enables : TOP, MIF
[    0.000000] [c0] mmc0: dout_mmc0 666000000
[    0.000000] [c0] mmc1: dout_mmc1 800000000
[    0.000000] [c0] mmc2: dout_mmc2 666000000
[    0.000000] [c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000
[    0.000000] [c0] [g2d_init_clock:319] aclk_333_g2d:333000000
[    0.000000] [c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 300000000
[    0.000000] [c0] [jpeg_clock_init:374]jpeg: dout_aclk_300_jpeg 300000000 aclk_300_jpeg 300000000
[    0.000000] [c0] mfc: aclk_333 400000000
[    0.000000] [c0] Exynos5422: clock setup completed
[    0.000000] [c0] Exynos: pwm: clock setup completed
[    0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] [c0] Switching to timer-based delay loop
[    0.000000] [c0] EXYNOS5422 PMU Initialize
[    0.000000] [c0] Console: colour dummy device 80x30
[    0.000000] [c0] console [tty1] enabled
[    0.000000] [c0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] [c0] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] [c0] ... MAX_LOCK_DEPTH:          48
[    0.000000] [c0] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] [c0] ... CLASSHASH_SIZE:          4096
[    0.000000] [c0] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] [c0] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] [c0] ... CHAINHASH_SIZE:          16384
[    0.000000] [c0]  memory used by lock dependency info: 3679 kB
[    0.000000] [c0]  per task-struct memory footprint: 1152 bytes
[    0.007722] [c0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[    0.007816] [c0] pid_max: default: 32768 minimum: 301
[    0.008322] [c0] Mount-cache hash table entries: 512
[    0.044420] [c0] Initializing cgroup subsys debug
[    0.044495] [c0] Initializing cgroup subsys memory
[    0.044610] [c0] Initializing cgroup subsys devices
[    0.044675] [c0] Initializing cgroup subsys freezer
[    0.044737] [c0] Initializing cgroup subsys blkio
[    0.044787] [c0] Initializing cgroup subsys perf_event
[    0.045102] [c0] CPU: Testing write buffer coherency: ok
[    0.045203] [c0] ftrace: allocating 22868 entries in 68 pages
[    0.093615] [c0] /cpus/cpu@0 missing clock-frequency property
[    0.093684] [c0] /cpus/cpu@1 missing clock-frequency property
[    0.093732] [c0] /cpus/cpu@2 missing clock-frequency property
[    0.093778] [c0] /cpus/cpu@3 missing clock-frequency property
[    0.093823] [c0] /cpus/cpu@4 missing clock-frequency property
[    0.093868] [c0] /cpus/cpu@5 missing clock-frequency property
[    0.093912] [c0] /cpus/cpu@6 missing clock-frequency property
[    0.093956] [c0] /cpus/cpu@7 missing clock-frequency property
[    0.094054] [c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.094264] [c0] Running under secure firmware.
[    0.094335] [c0] Setting up static identity map for 0xc061ab88 - 0xc061abe0
[    0.094393] [c0] Exynos-SnapShot: exynos_ss_init failed
[    0.114782] [c0] ftrace: Allocated trace_printk buffers
[    0.136504] [c0] cpu1: SWRESET
[    0.136759] [c1] CPU1: Booted secondary processor
[    0.136787] [c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.146421] [c0] cpu2: SWRESET
[    0.146739] [c2] CPU2: Booted secondary processor
[    0.146766] [c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.156402] [c0] cpu3: SWRESET
[    0.156715] [c3] CPU3: Booted secondary processor
[    0.156741] [c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.165595] [c4] CPU4: Booted secondary processor
[    0.166445] [c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.175594] [c5] CPU5: Booted secondary processor
[    0.176428] [c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.185623] [c6] CPU6: Booted secondary processor
[    0.186456] [c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.195597] [c7] CPU7: Booted secondary processor
[    0.196449] [c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.196723] [c0] Brought up 8 CPUs
[    0.197050] [c0] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.197092] [c0] CPU: All CPU(s) started in SVC mode.
[    0.199626] [c0] devtmpfs: initialized
[    0.239730] [c6] sched: registering cpufreq notifiers for scale-invariant loads
[    0.242211] [c6] pinctrl core: initialized pinctrl subsystem
[    0.243270] [c6] regulator-dummy: no parameters
[    0.253104] [c6] NET: Registered protocol family 16
[    0.253641] [c6] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.260431] [c6] gpiochip_add: registered GPIOs 0 to 7 on device: gpy7
[    0.260611] [c6] gpiochip_add: registered GPIOs 8 to 15 on device: gpx0
[    0.260783] [c6] gpiochip_add: registered GPIOs 16 to 23 on device: gpx1
[    0.260953] [c6] gpiochip_add: registered GPIOs 24 to 31 on device: gpx2
[    0.261130] [c6] gpiochip_add: registered GPIOs 32 to 39 on device: gpx3
[    0.263096] [c6] gpiochip_add: registered GPIOs 40 to 47 on device: gpc0
[    0.263277] [c6] gpiochip_add: registered GPIOs 48 to 55 on device: gpc1
[    0.263450] [c6] gpiochip_add: registered GPIOs 56 to 62 on device: gpc2
[    0.263622] [c6] gpiochip_add: registered GPIOs 63 to 66 on device: gpc3
[    0.263799] [c6] gpiochip_add: registered GPIOs 67 to 68 on device: gpc4
[    0.263982] [c6] gpiochip_add: registered GPIOs 69 to 76 on device: gpd1
[    0.264154] [c6] gpiochip_add: registered GPIOs 77 to 82 on device: gpy0
[    0.264331] [c6] gpiochip_add: registered GPIOs 83 to 86 on device: gpy1
[    0.264502] [c6] gpiochip_add: registered GPIOs 87 to 92 on device: gpy2
[    0.264679] [c6] gpiochip_add: registered GPIOs 93 to 100 on device: gpy3
[    0.264855] [c6] gpiochip_add: registered GPIOs 101 to 108 on device: gpy4
[    0.265028] [c6] gpiochip_add: registered GPIOs 109 to 116 on device: gpy5
[    0.265209] [c6] gpiochip_add: registered GPIOs 117 to 124 on device: gpy6
[    0.266985] [c6] gpiochip_add: registered GPIOs 125 to 132 on device: gpe0
[    0.267166] [c6] gpiochip_add: registered GPIOs 133 to 134 on device: gpe1
[    0.267339] [c6] gpiochip_add: registered GPIOs 135 to 140 on device: gpf0
[    0.267511] [c6] gpiochip_add: registered GPIOs 141 to 148 on device: gpf1
[    0.267687] [c6] gpiochip_add: registered GPIOs 149 to 156 on device: gpg0
[    0.267862] [c6] gpiochip_add: registered GPIOs 157 to 164 on device: gpg1
[    0.268036] [c6] gpiochip_add: registered GPIOs 165 to 166 on device: gpg2
[    0.268216] [c6] gpiochip_add: registered GPIOs 167 to 170 on device: gpj4
[    0.269655] [c6] gpiochip_add: registered GPIOs 171 to 178 on device: gpa0
[    0.269844] [c6] gpiochip_add: registered GPIOs 179 to 184 on device: gpa1
[    0.270020] [c6] gpiochip_add: registered GPIOs 185 to 192 on device: gpa2
[    0.270201] [c6] gpiochip_add: registered GPIOs 193 to 197 on device: gpb0
[    0.270377] [c6] gpiochip_add: registered GPIOs 198 to 202 on device: gpb1
[    0.270599] [c6] gpiochip_add: registered GPIOs 203 to 206 on device: gpb2
[    0.270784] [c6] gpiochip_add: registered GPIOs 207 to 214 on device: gpb3
[    0.270961] [c6] gpiochip_add: registered GPIOs 215 to 216 on device: gpb4
[    0.271139] [c6] gpiochip_add: registered GPIOs 217 to 224 on device: gph0
[    0.273107] [c6] gpiochip_add: registered GPIOs 225 to 231 on device: gpz
[    0.292877] [c6] syscon 10040000.system-controller: regmap [mem 0x10040000-0x10044fff] registered
[    0.293380] [c6] syscon 10050000.syscon: regmap [mem 0x10050000-0x10054fff] registered
[    0.301183] [c6] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.301233] [c6] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.303142] [c6] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.307358] [c6] PM DOMAIN: pd-cam has a new child pd-isp.
[    0.308233] [c6] PM DOMAIN: pd-gscl has a new child pd-cam.
[    0.308282] [c6] EXYNOS5: PM Domain Initialize
[    0.308583] [c6]    pd-gscl   - on
[    0.308770] [c6]    pd-isp    - on
[    0.308956] [c6]    pd-mfc    - on
[    0.308989] [c6]    pd-g3d    - on,  always
[    0.309023] [c6]    pd-disp1  - on,  always
[    0.309215] [c6]    pd-maudio - on
[    0.309247] [c6]    pd-g2d    - on,  always
[    0.309437] [c6]    pd-mscl   - on
[    0.309471] [c6]    pd-fsys   - on,  always
[    0.309506] [c6]    pd-psgen  - on,  always
[    0.309541] [c6]    pd-peric  - on,  always
[    0.309574] [c6]    pd-wcore  - on,  always
[    0.309766] [c6]    pd-cam    - on
[    0.309806] [c6] EXYNOS: Initializing architecture
[    0.311445] [c6] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d
[    0.311491] [c6] exynos-sysmmu 10a60000.sysmmu: [OK]
[    0.311870] [c6] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d
[    0.311914] [c6] exynos-sysmmu 10a70000.sysmmu: [OK]
[    0.312276] [c6] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer
[    0.312318] [c6] exynos-sysmmu 14650000.sysmmu: [OK]
[    0.312649] [c6] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc
[    0.312691] [c6] exynos-sysmmu 13e80000.sysmmu: [OK]
[    0.313018] [c6] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc
[    0.313060] [c6] exynos-sysmmu 13e90000.sysmmu: [OK]
[    0.313395] [c6] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler
[    0.313437] [c6] exynos-sysmmu 12880000.sysmmu: [OK]
[    0.313777] [c6] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler
[    0.313819] [c6] exynos-sysmmu 12890000.sysmmu: [OK]
[    0.314165] [c6] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler
[    0.314207] [c6] exynos-sysmmu 128a0000.sysmmu: [OK]
[    0.314545] [c6] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler
[    0.314588] [c6] exynos-sysmmu 128c0000.sysmmu: [OK]
[    0.314921] [c6] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler
[    0.314963] [c6] exynos-sysmmu 128d0000.sysmmu: [OK]
[    0.315304] [c6] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler
[    0.315346] [c6] exynos-sysmmu 128e0000.sysmmu: [OK]
[    0.315676] [c6] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg
[    0.315718] [c6] exynos-sysmmu 11f10000.sysmmu: [OK]
[    0.316054] [c6] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg
[    0.316096] [c6] exynos-sysmmu 11f20000.sysmmu: [OK]
[    0.316418] [c6] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc
[    0.316459] [c6] exynos-sysmmu 11200000.sysmmu: [OK]
[    0.316813] [c6] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc
[    0.316855] [c6] exynos-sysmmu 11210000.sysmmu: [OK]
[    0.317221] [c6] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd
[    0.317263] [c6] exynos-sysmmu 14640000.sysmmu: [OK]
[    0.317627] [c6] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd
[    0.317668] [c6] exynos-sysmmu 14680000.sysmmu: [OK]
[    0.318104] [c6] CPU Info : Samsung Exynos5422 Soc is BIN1
[    0.318139] [c6] Exynos5422 ASV : Use Fusing Speed Group 1
[    0.318172] [c6] Exynos5422 ASV : invalid IDS value
[    0.318202] [c6] EXYNOS5422 ASV :  IDS : 0 HPM : 0
[    0.318262] [c6] VDD_ARM ASV group is 1
[    0.318296] [c6] VDD_KFC ASV group is 1
[    0.318328] [c6] VDD_INT ASV group is 1
[    0.318359] [c6] VDD_MIF ASV group is 1
[    0.318390] [c6] VDD_G3D ASV group is 1
[    0.318421] [c6] VDD_ISP ASV group is 1
[    0.332140] [c7] bio: create slab <bio-0> at 0
[    0.333968] [c7] of_get_named_gpio_flags exited with status 119
[    0.334224] [c7] VUSB_BOOST_5V: 5000 mV
[    0.334529] [c7] of_get_named_gpio_flags: can't parse gpios property
[    0.334750] [c7] MAIN_DC: no parameters
[    0.335017] [c7] of_get_named_gpio_flags: can't parse gpios property
[    0.335236] [c7] hdmi-en: no parameters
[    0.336440] [c7] SCSI subsystem initialized
[    0.336885] [c7] usbcore: registered new interface driver usbfs
[    0.337020] [c7] usbcore: registered new interface driver hub
[    0.337275] [c7] usbcore: registered new device driver usb
[    0.343349] [c4] vdd_mif: 700 <--> 1300 mV at 1100 mV
[    0.344524] [c4] vdd_eagle: 800 <--> 1500 mV at 1000 mV
[    0.345684] [c4] vdd_int: 800 <--> 1400 mV at 1000 mV
[    0.346877] [c4] vdd_g3d: 700 <--> 1400 mV at 1000 mV
[    0.348040] [c4] vdd_kfc: 800 <--> 1500 mV at 1025 mV
[    0.349809] [c4] vddf_2v85: 3300 mV
[    0.351113] [c4] vdd_adc: 1800 mV
[    0.352532] [c4] vdd_pll: 1800 mV
[    0.353834] [c4] vdd_ldo6: 1000 mV
[    0.355138] [c4] vdd_ldo7: 1800 mV
[    0.356443] [c4] vdd_ldo8: 1800 mV
[    0.357762] [c4] vdd_ldo9: 3300 mV
[    0.359073] [c4] vdd_ldo10: 1800 mV
[    0.360372] [c4] vdd_ldo11: 1000 mV
[    0.361490] [c4] vdd_ldo13: 1800 <--> 3300 mV at 3300 mV
[    0.362908] [c4] vdd_ldo15: 3300 mV
[    0.364214] [c4] vdd_eth: 3300 mV
[    0.365521] [c4] vdd_ldo18: 1850 mV
[    0.366644] [c4] vdd_ldo19: 2800 <--> 3300 mV at 3300 mV
[    0.367646] [c4] vdd_mifs: 800 <--> 1100 mV at 975 mV
[    0.368958] [c4] vdd_ldo26: 3000 mV
[    0.369953] [c4] vdd_g3ds: 800 <--> 1100 mV at 1000 mV
[    0.371326] [c4] vdd_ldo28: 3300 mV
[    0.374316] [c4] of_get_named_gpio_flags exited with status 177
[    0.374346] [c4] of_get_named_gpio_flags exited with status 178
[    0.375262] [c4] i2c-gpio i2c_gpio.8: using pins 177 (SDA) and 178 (SCL)
[    0.375422] [c4] media: Linux media interface: v0.10
[    0.375527] [c4] Linux video capture interface: v2.00
[    0.377568] [c4] IOVMMU: Created debugfs entry at debugfs/iovmm
[    0.378178] [c4] Advanced Linux Sound Architecture Driver Initialized.
[    0.378820] [c4] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered
[    0.378882] [c4] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung Electronics
[    0.380883] [c4] Loading modules backported from Linux version next-20150222-0-g53e418f1
[    0.380931] [c4] Backport integrated by backports.git backports-20150222-0-g2745ccd
[    0.382805] [c4] Switching to clocksource mct-frc
[    0.460994] [c4] NET: Registered protocol family 2
[    0.462656] [c4] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.463214] [c4] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[    0.465218] [c4] TCP: Hash tables configured (established 8192 bind 8192)
[    0.465355] [c4] TCP: reno registered
[    0.465404] [c4] UDP hash table entries: 512 (order: 3, 40960 bytes)
[    0.465706] [c4] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[    0.466804] [c4] NET: Registered protocol family 1
[    0.467334] [c4] Unpacking initramfs...
[    0.765924] [c4] Freeing initrd memory: 3924K (c2001000 - c23d6000)
[    0.779811] [c4] bounce pool size: 64 pages
[    0.788670] [c4] VFS: Disk quotas dquot_6.5.2
[    0.789060] [c4] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.791947] [c4] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.792495] [c4] msgmni has been set to 1448
[    0.796740] [c4] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.797172] [c4] io scheduler noop registered
[    0.797209] [c4] io scheduler deadline registered
[    0.797456] [c4] io scheduler cfq registered (default)
[    0.808864] [c4] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    0.808914] [c4] dma-pl330 10800000.mdma:    DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    0.814979] [c4] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.815027] [c4] dma-pl330 121a0000.pdma:    DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.820955] [c4] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.821002] [c4] dma-pl330 121b0000.pdma:    DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.824196] [c4] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    0.824245] [c4] dma-pl330 3880000.adma:     DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    0.970469] [c4] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.973356] [c4] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
[    0.974195] [c4] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
[    0.974966] [c4] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
[    2.504330] [c4] console [ttySAC2] enabled
[    2.509100] [c4] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
[    2.519642] [c4] [drm] Initialized drm 1.1.0 20060810
[    2.526534] [c4] of_get_named_gpio_flags exited with status 39
[    2.530094] [c4] PM DOMAIN: spd-gscl0, Device : 13e00000.gsc Registered
[    2.535332] [c4] exynos-drm-gsc 13e00000.gsc: exynos-iommu gpd_dev_ops inserted!
[    2.543062] [c4] exynos-drm-gsc 13e00000.gsc: drm gsc registered successfully.
[    2.550286] [c4] PM DOMAIN: spd-gscl1, Device : 13e10000.gsc Registered
[    2.556495] [c4] exynos-drm-gsc 13e10000.gsc: exynos-iommu gpd_dev_ops inserted!
[    2.564171] [c4] exynos-drm-gsc 13e10000.gsc: drm gsc registered successfully.
[    2.572396] [c4] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
[    2.580202] [c4] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.585844] [c4] [drm] No driver support for vblank timestamp query.
[    2.592184] [c4] exynos-mixer 14450000.mixer: probe start
[    2.597812] [c4] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
[    2.605774] [c4] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
[    2.877512] [c4] Console: switching to colour frame buffer device 240x67
[    2.915303] [c4] exynos-drm exynos-drm: fb0:  frame buffer device
[    2.921315] [c4] exynos-drm exynos-drm: registered panic notifier
[    2.927393] [c4] [drm] Initialized exynos 1.0.0 20110530 on minor 0
[    2.934266] [c4] mali 11800000.mali: Continuing without Mali clock control
[    2.943814] [c4] hrtimer: interrupt took 116833 ns
[    2.948069] [c4] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
[    2.958239] mali 11800000.mali: Probed as mali0
[    2.970130] [c4] loop: module loaded
[    2.973503] [c4] tun: Universal TUN/TAP device driver, 1.6
[    2.977793] [c4] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.988785] [c4] of_get_named_gpio_flags exited with status 48
[    2.988812] [c4] of_get_named_gpio_flags exited with status 37
[    3.191495] [c4] of_get_named_gpio_flags exited with status 17
[    3.191521] [c4] of_get_named_gpio_flags exited with status 36
[    3.393128] [c4] dwc3 12400000.dwc3: dwc3_otg address space is not supported
[    3.399880] [c4] dwc3 12400000.dwc3: Binding gadget dwc3-gadget
[    3.405555] [c4] dwc3 12400000.dwc3: Turn on host
[    3.610510] [c4] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.616153] [c4] ehci-s5p: EHCI s5p driver
[    3.620495] [c4] of_get_named_gpio_flags exited with status 121
[    3.620765] [c4] s5p-ehci 12110000.usb: EHCI Host Controller
[    3.625971] [c4] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    3.633895] [c4] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
[    3.648066] [c4] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    3.654358] [c4] hub 1-0:1.0: USB hub found
[    3.657226] [c4] hub 1-0:1.0: 3 ports detected
[    3.663022] [c4] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.668700] [c4] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller
[    3.674852] [c4] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    3.682960] [c4] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000
[    3.748452] [c4] hub 2-0:1.0: USB hub found
[    3.751257] [c4] hub 2-0:1.0: 3 ports detected
[    3.757336] [c4] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    3.762136] [c4] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[    3.770351] [c4] xhci-hcd xhci-hcd.2.auto: irq 104, io mem 0x12000000
[    3.777324] [c4] xHCI xhci_add_endpoint called for root hub
[    3.777341] [c4] xHCI xhci_check_bandwidth called for root hub
[    3.777620] [c4] hub 3-0:1.0: USB hub found
[    3.780636] [c4] hub 3-0:1.0: 1 port detected
[    3.789712] [c4] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    3.798553] [c4] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[    3.810490] [c4] xHCI xhci_add_endpoint called for root hub
[    3.810507] [c4] xHCI xhci_check_bandwidth called for root hub
[    3.810798] [c4] hub 4-0:1.0: USB hub found
[    3.817858] [c4] hub 4-0:1.0: 1 port detected
[    3.825683] [c4] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    3.834447] [c4] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    3.845601] [c4] xhci-hcd xhci-hcd.5.auto: irq 105, io mem 0x12400000
[    3.855861] [c4] xHCI xhci_add_endpoint called for root hub
[    3.855878] [c4] xHCI xhci_check_bandwidth called for root hub
[    3.856163] [c4] hub 5-0:1.0: USB hub found
[    3.863205] [c4] hub 5-0:1.0: 1 port detected
[    3.870850] [c4] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    3.879512] [c4] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    3.891358] [c4] xHCI xhci_add_endpoint called for root hub
[    3.891375] [c4] xHCI xhci_check_bandwidth called for root hub
[    3.891673] [c4] hub 6-0:1.0: USB hub found
[    3.898539] [c4] hub 6-0:1.0: 1 port detected
[    3.906345] [c4] usbcore: registered new interface driver usb-storage
[    3.915587] [c4] usbcore: registered new interface driver usbserial
[    3.924569] [c4] usbcore: registered new interface driver usbserial_generic
[    3.934112] [c4] usbserial: USB Serial support registered for generic
[    3.943840] [c5] of_get_named_gpio_flags: can't parse gpios property
[    3.943861] [c5] exynos-usb-switch usb-switch.10: host detect gpio is not available
[    3.954032] [c5] of_get_named_gpio_flags: can't parse gpios property
[    3.954051] [c5] exynos-usb-switch usb-switch.10: device detect gpio is not available
[    3.964327] [c5] of_get_named_gpio_flags: can't parse gpios property
[    3.964346] [c5] exynos-usb-switch usb-switch.10: vbus control gpio is not available
[    3.974524] [c5] exynos-usb-switch usb-switch.10: failed to configure pins
[    3.983961] [c5] exynos-usb-switch usb-switch.10: udc device is not available
[    3.993419] [c5] exynos-usb-switch usb-switch.10: Disable device detect IRQ
[    4.023083] [c5] usb cable = 1
[    4.029506] [c5] mousedev: PS/2 mouse device common for all mice
[    4.041388] [c5] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr: enable WTSR
[    4.050140] [c5] s2m-rtc s2m-rtc: s2m_rtc_enable_smpl: enable SMPL
[    4.058994] [c5] s2m_rtc_enable_smpl: WTSR_SMPL(0xc7)
[    4.070610] [c5] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0
[    4.080148] [c5] i2c /dev entries driver
[    4.087573] [c5] IR NEC protocol handler initialized
[    4.094687] [c5] IR RC5(x) protocol handler initialized
[    4.102049] [c5] IR RC6 protocol handler initialized
[    4.109127] [c5] IR JVC protocol handler initialized
[    4.116143] [c5] IR Sony protocol handler initialized
[    4.123254] [c5] IR RC5 (streamzap) protocol handler initialized
[    4.131286] [c5] IR SANYO protocol handler initialized
[    4.138441] [c5] IR MCE Keyboard/mouse protocol handler initialized
[    4.147268] [c5] PM DOMAIN: pd-mfc, Device : 11000000.mfc Registered
[    4.155688] [c5] s5p-mfc 11000000.mfc: exynos-iommu gpd_dev_ops inserted!
[    4.164557] [c5] s5p-mfc 11000000.mfc: s5p_mfc_probe()
[    4.164587] [c5] s5p-mfc 11000000.mfc: of alias get id : mfc-0
[    4.165374] [c5] s5p-mfc 11000000.mfc: decoder registered as /dev/video6
[    4.174474] [c5] s5p-mfc 11000000.mfc: encoder registered as /dev/video7
[    4.183720] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
[    4.194412] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
[    4.205050] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
[    4.215649] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
[    4.226208] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
[    4.236726] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
[    4.248248] [c5] ion_cma ion_mfc_nfw: Alread isolated!
[    4.255236] [c5] s5p_mfc_probe--
[    4.255569] [c5] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics
[    4.265081] [c5] of_get_named_gpio_flags exited with status 38
[    4.265200] [c5] s5p-tvout-cec 101b0000.cec: success request GPIO for hdmi-cec
[    4.274391] s5p-tvout-cec 101b0000.cec: probe successful
[    4.283123] [c5] TRIMINFO[0] = 0x80642e
[    4.288839] [c5] TMU_CONTROL[0] = 0x10609803
[    4.294960] [c5] CURRENT_TEMP[0] = 0x4b
[    4.300627] [c5] THRESHOLD_TEMP_RISE[0] = 0x837e7974
[    4.307455] [c5] THRESHOLD_TEMP_FALL[0] = 0x817c7772
[    4.314240] [c5] INTEN[0] = 0x11111111
[    4.319805] [c5] INTCLEAR[0] = 0x0
[    4.325002] [c5] TRIMINFO[1] = 0x806c33
[    4.330593] [c5] TMU_CONTROL[1] = 0x10609803
[    4.336626] [c5] CURRENT_TEMP[1] = 0x53
[    4.342206] [c5] THRESHOLD_TEMP_RISE[1] = 0x88837e79
[    4.348921] [c5] THRESHOLD_TEMP_FALL[1] = 0x86817c77
[    4.355569] [c5] INTEN[1] = 0x11111111
[    4.361006] [c5] INTCLEAR[1] = 0x0
[    4.366101] [c5] TRIMINFO[2] = 0x806c32
[    4.371581] [c5] TMU_CONTROL[2] = 0x10609803
[    4.377472] [c5] CURRENT_TEMP[2] = 0x4d
[    4.382898] [c5] THRESHOLD_TEMP_RISE[2] = 0x7e79746f
[    4.389496] [c5] THRESHOLD_TEMP_FALL[2] = 0x7c77726d
[    4.396047] [c5] INTEN[2] = 0x11111111
[    4.401368] [c5] INTCLEAR[2] = 0x0
[    4.406308] [c5] TRIMINFO[3] = 0x806529
[    4.411662] [c5] TMU_CONTROL[3] = 0x10609803
[    4.417431] [c5] CURRENT_TEMP[3] = 0x4f
[    4.422781] [c5] THRESHOLD_TEMP_RISE[3] = 0x827d7873
[    4.429297] [c5] THRESHOLD_TEMP_FALL[3] = 0x807b7671
[    4.435766] [c5] INTEN[3] = 0x11111111
[    4.440973] [c5] INTCLEAR[3] = 0x0
[    4.445865] [c5] TRIMINFO[4] = 0x80682d
[    4.451127] [c5] TMU_CONTROL[4] = 0x10609803
[    4.456812] [c5] CURRENT_TEMP[4] = 0x50
[    4.462053] [c5] THRESHOLD_TEMP_RISE[4] = 0x87827d78
[    4.468451] [c5] THRESHOLD_TEMP_FALL[4] = 0x85807b76
[    4.474855] [c5] INTEN[4] = 0x11111111
[    4.479964] [c5] INTCLEAR[4] = 0x0
[    4.486188] [c5] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    4.497634] [c5] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    4.508930] [c5] cpuidle: using governor ladder
[    4.516638] [c5] cpuidle: using governor menu
[    4.518154] [c6] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    4.530856] [c5] Synopsys Designware Multimedia Card Interface Driver
[    4.539864] [c5] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 Addr:13410000.pinctrl Val:3 Num:4
[    4.546569] hub 3-1:1.0: USB hub found
[    4.546931] [c6] hub 3-1:1.0: 2 ports detected
[    4.562769] [c5] of_get_named_gpio_flags exited with status 69
[    4.562815] [c5] dwmmc_exynos 12200000.dwmmc0: dw_mci_parse_dt : emmc h/w reset gpio[69] notifier registered.
[    4.574567] [c5] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller.
[    4.583455] [c5] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030
[    4.591340] dwmmc_exynos 12200000.dwmmc0: Version ID is 250a
[    4.599153] [c6] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo
[    4.628074] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[    4.653246] [c6] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized
[    4.662114] [c6] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 Addr:13410000.pinctrl Val:3 Num:3
[    4.674098] of_get_named_gpio_flags: can't parse gpios property
[    4.674268] [c6] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller.
[    4.683499] [c6] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030
[    4.691758] dwmmc_exynos 12220000.dwmmc2: Version ID is 250a
[    4.693154] [c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35)
[    4.712015] [c7] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo
[    4.724973] [c7] mmc1: vmmc regulator found
[    4.731645] [c7] mmc1: vqmmc regulator found
[    4.748076] [c4] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53)
[    4.763061] [c7] mmc_host mmc1: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[    4.788235] [c7] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized
[    4.797799] [c7] leds-gpio leds.15: pins are not configured from the driver
[    4.807186] [c7] of_get_named_gpio_flags exited with status 205
[    4.807214] [c7] of_get_named_gpio_flags exited with status 204
[    4.807238] [c7] of_get_named_gpio_flags exited with status 27
[    4.807267] [c7] of_get_named_gpio_flags exited with status 205
[    4.807586] [c7] of_get_named_gpio_flags exited with status 204
[    4.807842] [c7] of_get_named_gpio_flags exited with status 27
[    4.808097] [c5] usb 2-1: new full-speed USB device number 2 using exynos-ohci
[    4.808860] [c7] ledtrig-cpu: registered to indicate activity on CPUs
[    4.808948] [c7] S5P ACE Driver(SLIMSSS), (c) 2013 Samsung Electronics
[    4.810299] [c4] ACE: ecb-aes-s5p-ace
[    4.810749] [c4] ACE: cbc-aes-s5p-ace
[    4.811194] [c4] ACE: ctr-aes-s5p-ace
[    4.811640] [c4] ACE: xts-aes-s5p-ace
[    4.812079] [c4] ACE: sha1-s5p-ace
[    4.812490] [c4] ACE: sha256-s5p-ace
[    4.812501] [c4] ACE driver is initialized
[    4.813145] [c4] hidraw: raw HID events driver (C) Jiri Kosina
[    4.813850] [c4] usbcore: registered new interface driver usbhid
[    4.813856] [c4] usbhid: USB HID core driver
[    4.814757] [c4] exynos-adc 12d10000.adc: operating without regulator vdd[-19]
[    4.815344] [c4] exynos-adc 12d10000.adc: Probed successfully driver.
[    4.816244] [c4] odroid-fan odroid_fan.14: unable to request PWM, trying legacy API
[    4.816390] [c4] pwm-samsung: tin parent at 66600000
[    4.819202] [c4] of_get_named_gpio_flags exited with status 34
[    4.822569] [c4] lpass_register_subip: i2s(de336c10) registered
[    4.958144] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105)
[    5.098683] [c6] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 400000Hz, actual 398325HZ div = 209)
[    5.111553] [c6] mmc_host mmc1: Bus speed (slot 0) = 166500000Hz (slot req 166500000Hz, actual 166500000HZ div = 0)
[    5.125138] [c0] dwmmc_exynos 12220000.dwmmc2: data CRC error
[    5.137543] [c6] mmc_host mmc1: Tuning error: cmd.error:0, data.error:-84
[    5.150535] [c6] mmc_host mmc1: Tuning error: cmd.error:-84, data.error:-115
[    5.160415] [c6] dwmmc_exynos 12220000.dwmmc2: divratio: 3 map: 0x 00007ffe
[    5.164885] [c5] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/12120000.usb/usb2/2-1/2-1:1.0/input/input0
[    5.166378] [c5] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-12120000.usb-1/input0
[    5.177351] [c5] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/12120000.usb/usb2/2-1/2-1:1.1/input/input1
[    5.179609] [c5] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-12120000.usb-1/input1
[    5.208432] [c5] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/12120000.usb/usb2/2-1/2-1:1.2/input/input2
[    5.211470] [c5] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-12120000.usb-1/input2
[    5.267804] [c6] dwmmc_exynos 12220000.dwmmc2: sample_good: 0x 7ffe best_sample: 0x 07
[    5.279491] [c6] mmc1: new ultra high speed SDR104 SDHC card at address 0007
[    5.291468] [c6] mmcblk0: mmc1:0007 SL32G 28.9 GiB
[    5.302632] [c6]  mmcblk0: p1 p2
[    5.318354] [c5] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    5.328066] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
[    5.353748] [c5] usb 6-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[    5.383093] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 300000Hz, actual 297321HZ div = 35)
[    5.448529] [c5] usb 3-1.2: new high-speed USB device number 3 using xhci-hcd
[    5.453130] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 200000Hz, actual 196344HZ div = 53)
[    5.518092] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 100000Hz, actual 99107HZ div = 105)
[    5.823049] [c4] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
: CTL          0x00000089
: FIFO_CTL     0x00200203
: TRAILING_CTL 0x0000000f
: CLK_CTL      0x00000000
: CLK_SLOT     0x00000000
: INT_EN       0x00000000
: INT_STAT     0x00000000
: ERR_STAT     0x00000000
: FIFO_STAT    0x01000002
: TXDATA       0xdeadbeaf
: RXDATA       0x00000000
: CONF         0xb00300ff
: AUTO_CONF    0x00020002
: TIMEOUT      0x000000ff
: MANUAL_CMD   0x00000000
: TRANS_STAT   0x00000000
: TIMING_HS1   0x4b4b4b00
: TIMING_HS2   0x25004b4b
: TIMING_HS3   0x00000096
: TIMING_FS1   0x4b4b4b00
: TIMING_FS2   0x25004b4b
: TIMING_FS3   0x00000096
: TIMING_SLA   0x00000025
: ADDR         0x00004000
[    6.019615] [c4] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
[    7.023050] [c4] exynos5-hsi2c 12cb0000.hsi2c: Register dump(suspended : 0)
: CTL          0x00000089
: FIFO_CTL     0x00200203
: TRAILING_CTL 0x0000000f
: CLK_CTL      0x00000000
: CLK_SLOT     0x00000000
: INT_EN       0x00000000
: INT_STAT     0x00000000
: ERR_STAT     0x00000000
: FIFO_STAT    0x01000002
: TXDATA       0xdeadbeaf
: RXDATA       0x00000000
: CONF         0xb00300ff
: AUTO_CONF    0x00020002
: TIMEOUT      0x000000ff
: MANUAL_CMD   0x00000000
: TRANS_STAT   0x00000000
: TIMING_HS1   0x4b4b4b00
: TIMING_HS2   0x25004b4b
: TIMING_HS3   0x00000096
: TIMING_FS1   0x4b4b4b00
: TIMING_FS2   0x25004b4b
: TIMING_FS3   0x00000096
: TIMING_SLA   0x00000025
: ADDR         0x00004000
[    7.195707] [c4] exynos5-hsi2c 12cb0000.hsi2c: tx timeout
[    7.202233] [c4] exynos5-hsi2c 12cb0000.hsi2c: xfer message failed
[    7.209328] [c4] max98090 1-0010: Failed to reset codec: -5
[    7.215772] [c4] max98090 1-0010: Failed to device reset : -5
[    7.222406] [c4] max98090 1-0010: ASoC: failed to probe CODEC -5
[    7.229472] [c4] odroid-audio sound.13: ASoC: failed to instantiate card -5
[    7.237607] [c4] odroid-audio sound.13: snd_soc_register_card() failed(max98090): -5
[    7.247116] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[    7.256039] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[    7.264947] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[    7.273712] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[    7.282466] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Capture debugfs file
[    7.291130] [c4] dummy-codec dummy-codec.11: ASoC: Failed to create Playback debugfs file
[    7.300461] [c4] odroid-audio sound.13:  dummy-aif1 <-> samsung-i2s-sec mapping ok
[    7.309540] [c4] odroid-audio sound.13:  dummy-aif2 <-> 3830000.i2s mapping ok
[    7.320578] [c4] Netfilter messages via NETLINK v0.30.
[    7.326941] [c4] arp_tables: (C) 2002 David S. Miller
[    7.332722] [c4] TCP: cubic registered
[    7.337067] [c4] Initializing XFRM netlink socket
[    7.343245] [c4] NET: Registered protocol family 10
[    7.350587] [c4] mip6: Mobile IPv6
[    7.354714] [c4] sit: IPv6 over IPv4 tunneling driver
[    7.362379] [c4] NET: Registered protocol family 17
[    7.368061] [c4] NET: Registered protocol family 15
[    7.373722] [c4] NET: Registered protocol family 35
[    7.379809] [c4] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    7.388738] [c4] Registering SWP/SWPB emulation handler
[    7.394818] [c4] SRAM ASV group [1] : MIF(975000), G3D(1000000)
[    7.407488] [c4] registered taskstats version 1
[    7.413286] [c4] MAIN_DC: disabling
[    7.417679] [c4] regulator-dummy: disabling
[    7.423976] [c5] of_get_named_gpio_flags exited with status 11
[    7.424109] [c5] gpiod_set_debounce: gpio-11 status -22
[    7.424612] [c5] input: gpio_keys.7 as /devices/gpio_keys.7/input/input3
[    7.434982] [c5] s2m-rtc s2m-rtc: setting system clock to 2016-06-28 22:04:59 UTC (1467151499)
[    7.444778] [c5] CPUFREQ of CA7  L0 : 1300000 uV
[    7.450581] [c5] CPUFREQ of CA7  L0 : ABB 8
[    7.455945] [c5] CPUFREQ of CA7  L1 : 1300000 uV
[    7.461754] [c5] CPUFREQ of CA7  L1 : ABB 2
[    7.467095] [c5] CPUFREQ of CA7  L2 : 1262500 uV
[    7.472855] [c5] CPUFREQ of CA7  L2 : ABB 2
[    7.478128] [c5] CPUFREQ of CA7  L3 : 1212500 uV
[    7.483840] [c5] CPUFREQ of CA7  L3 : ABB 2
[    7.489111] [c5] CPUFREQ of CA7  L4 : 1162500 uV
[    7.494824] [c5] CPUFREQ of CA7  L4 : ABB 2
[    7.500112] [c5] CPUFREQ of CA7  L5 : 1125000 uV
[    7.505854] [c5] CPUFREQ of CA7  L5 : ABB 2
[    7.511167] [c5] CPUFREQ of CA7  L6 : 1087500 uV
[    7.516936] [c5] CPUFREQ of CA7  L6 : ABB 2
[    7.522269] [c5] CPUFREQ of CA7  L7 : 1050000 uV
[    7.528038] [c5] CPUFREQ of CA7  L7 : ABB 2
[    7.533368] [c5] CPUFREQ of CA7  L8 : 1012500 uV
[    7.539144] [c5] CPUFREQ of CA7  L8 : ABB 255
[    7.544650] [c5] CPUFREQ of CA7  L9 : 975000 uV
[    7.550345] [c5] CPUFREQ of CA7  L9 : ABB 255
[    7.555863] [c5] CPUFREQ of CA7  L10 : 937500 uV
[    7.561647] [c5] CPUFREQ of CA7  L10 : ABB 255
[    7.567262] [c5] CPUFREQ of CA7  L11 : 900000 uV
[    7.573059] [c5] CPUFREQ of CA7  L11 : ABB 255
[    7.578686] [c5] CPUFREQ of CA7  L12 : 900000 uV
[    7.584485] [c5] CPUFREQ of CA7  L12 : ABB 255
[    7.590121] [c5] CPUFREQ of CA7  L13 : 900000 uV
[    7.595931] [c5] CPUFREQ of CA7  L13 : ABB 255
[    7.601581] [c5] CPUFREQ of CA7  L14 : 900000 uV
[    7.607371] [c5] CPUFREQ of CA7  L14 : ABB 255
[    7.613262] [c5] kfc clock[800000], mx_mspll clock[666000]
[    7.619920] [c5] [SET_EMA_TEST] volt : 887500  value : 0x44
[    7.626686] [c5] [SET_EMA_TEST] volt : 937500  value : 0x44
[    7.633429] [c5] [SET_EMA_TEST] volt : 1032500  value : 0x33
[    7.640220] [c5] [SET_EMA_TEST] volt : 1142500  value : 0x11
[    7.646962] [c5] [SET_EMA_TEST] volt : 1167500  value : 0x11
[    7.653641] [c5] CPUFREQ of CA15 L0 : 1362500 uV
[    7.659288] [c5] CPUFREQ of CA15  L0 : ABB 8
[    7.664575] [c5] CPUFREQ of CA15 L1 : 1362500 uV
[    7.670208] [c5] CPUFREQ of CA15  L1 : ABB 8
[    7.675481] [c5] CPUFREQ of CA15 L2 : 1362500 uV
[    7.681102] [c5] CPUFREQ of CA15  L2 : ABB 8
[    7.686314] [c5] CPUFREQ of CA15 L3 : 1362500 uV
[    7.691873] [c5] CPUFREQ of CA15  L3 : ABB 255
[    7.697197] [c5] CPUFREQ of CA15 L4 : 1312500 uV
[    7.702684] [c5] CPUFREQ of CA15  L4 : ABB 255
[    7.708071] [c5] CPUFREQ of CA15 L5 : 1237500 uV
[    7.713519] [c5] CPUFREQ of CA15  L5 : ABB 255
[    7.718770] [c5] CPUFREQ of CA15 L6 : 1187500 uV
[    7.724179] [c5] CPUFREQ of CA15  L6 : ABB 255
[    7.729394] [c5] CPUFREQ of CA15 L7 : 1150000 uV
[    7.734766] [c5] CPUFREQ of CA15  L7 : ABB 255
[    7.739977] [c5] CPUFREQ of CA15 L8 : 1112500 uV
[    7.745365] [c5] CPUFREQ of CA15  L8 : ABB 255
[    7.750528] [c5] CPUFREQ of CA15 L9 : 1075000 uV
[    7.755820] [c5] CPUFREQ of CA15  L9 : ABB 255
[    7.760894] [c5] CPUFREQ of CA15 L10 : 1050000 uV
[    7.766206] [c5] CPUFREQ of CA15  L10 : ABB 255
[    7.771327] [c5] CPUFREQ of CA15 L11 : 1037500 uV
[    7.776621] [c5] CPUFREQ of CA15  L11 : ABB 255
[    7.781696] [c5] CPUFREQ of CA15 L12 : 1012500 uV
[    7.786890] [c5] CPUFREQ of CA15  L12 : ABB 255
[    7.791839] [c5] CPUFREQ of CA15 L13 : 987500 uV
[    7.796880] [c5] CPUFREQ of CA15  L13 : ABB 255
[    7.801845] [c5] CPUFREQ of CA15 L14 : 962500 uV
[    7.806900] [c5] CPUFREQ of CA15  L14 : ABB 255
[    7.811858] [c5] CPUFREQ of CA15 L15 : 937500 uV
[    7.816920] [c5] CPUFREQ of CA15  L15 : ABB 255
[    7.821890] [c5] CPUFREQ of CA15 L16 : 912500 uV
[    7.826958] [c5] CPUFREQ of CA15  L16 : ABB 255
[    7.831944] [c5] CPUFREQ of CA15 L17 : 900000 uV
[    7.837023] [c5] CPUFREQ of CA15  L17 : ABB 255
[    7.842015] [c5] CPUFREQ of CA15 L18 : 900000 uV
[    7.847092] [c5] CPUFREQ of CA15  L18 : ABB 255
[    7.852097] [c5] CPUFREQ of CA15 L19 : 900000 uV
[    7.857188] [c5] CPUFREQ of CA15  L19 : ABB 255
[    7.862193] [c5] CPUFREQ of CA15 L20 : 900000 uV
[    7.867301] [c5] CPUFREQ of CA15  L20 : ABB 255
[    7.872325] [c5] CPUFREQ of CA15 L21 : 900000 uV
[    7.877433] [c5] CPUFREQ of CA15  L21 : ABB 255
[    7.882458] [c5] CPUFREQ of CA15 L22 : 900000 uV
[    7.887584] [c5] CPUFREQ of CA15  L22 : ABB 255
[    7.892921] [c5] eagle clock[800000], mpll clock[800000]
[    7.903181] [c6] Exynos: Kernel Thermal management registered
[    7.908977] [c7] ### dt-test ### No testcase data in device tree; not running tests
[    7.953790] [c7] MIF 825000Khz ASV is 987500uV
[    7.957884] [c7] DEVFREQ(MIF) : 825000Khz, ABB 14
[    7.962536] [c7] MIF 728000Khz ASV is 950000uV
[    7.966974] [c7] DEVFREQ(MIF) : 728000Khz, ABB 14
[    7.971666] [c7] MIF 633000Khz ASV is 912500uV
[    7.976102] [c7] DEVFREQ(MIF) : 633000Khz, ABB 14
[    7.980806] [c7] MIF 543000Khz ASV is 887500uV
[    7.985226] [c7] DEVFREQ(MIF) : 543000Khz, ABB 14
[    7.989903] [c7] MIF 413000Khz ASV is 825000uV
[    7.994345] [c7] DEVFREQ(MIF) : 413000Khz, ABB 14
[    7.999041] [c7] MIF 275000Khz ASV is 825000uV
[    8.003478] [c7] DEVFREQ(MIF) : 275000Khz, ABB 14
[    8.008184] [c7] MIF 206000Khz ASV is 825000uV
[    8.012570] [c7] DEVFREQ(MIF) : 206000Khz, ABB 14
[    8.017300] [c7] MIF 165000Khz ASV is 825000uV
[    8.021732] [c7] DEVFREQ(MIF) : 165000Khz, ABB 14
[    8.026426] [c7] MIF 138000Khz ASV is 825000uV
[    8.030865] [c7] DEVFREQ(MIF) : 138000Khz, ABB 14
[    8.036840] [c7] MIF: set ASV freq 825000, voltage 987500
[    8.042589] [c7] INT 600000Khz ASV is 975000uV
[    8.046821] [c7] DEVFREQ(INT) : 600000Khz, ABB 255
[    9.052995] [c7] PM DOMAIN: Power off unused power domains.
[    9.058862] [c7] ALSA device list:
[    9.062038] [c7]   #0: odroid-audio
[    9.066645] [c7] Freeing unused kernel memory: 424K (c089c000 - c0906000)
[    9.107761] [c6] systemd-udevd[142]: starting version 215
[   12.872894] [c4] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   13.113190] [c5] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[   13.127202] [c5] systemd[1]: Detected architecture 'arm'.
[   13.164452] [c6] systemd[1]: Set hostname to <odroid-jessie>.
[   13.564063] [c6] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   13.572526] [c6] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   13.580657] [c6] systemd[1]: Expecting device dev-ttySAC2.device...
[   13.598143] [c7] systemd[1]: Starting Remote File Systems (Pre).
[   13.618111] [c7] systemd[1]: Reached target Remote File Systems (Pre).
[   13.624850] [c7] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   13.633663] [c7] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   13.642195] [c7] systemd[1]: Starting Paths.
[   13.658091] [c7] systemd[1]: Reached target Paths.
[   13.663177] [c7] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   13.688123] [c4] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   13.698242] [c4] systemd[1]: Starting Encrypted Volumes.
[   13.718121] [c5] systemd[1]: Reached target Encrypted Volumes.
[   13.724272] [c5] systemd[1]: Starting Swap.
[   13.738121] [c6] systemd[1]: Reached target Swap.
[   13.743167] [c6] systemd[1]: Expecting device dev-mmcblk0p1.device...
[   13.763092] [c6] systemd[1]: Starting Root Slice.
[   13.778084] [c6] systemd[1]: Created slice Root Slice.
[   13.783562] [c6] systemd[1]: Starting User and Session Slice.
[   13.803111] [c7] systemd[1]: Created slice User and Session Slice.
[   13.809639] [c7] systemd[1]: Starting Delayed Shutdown Socket.
[   13.828085] [c7] systemd[1]: Listening on Delayed Shutdown Socket.
[   13.834671] [c7] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   13.853120] [c7] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   13.860965] [c7] systemd[1]: Starting Journal Socket (/dev/log).
[   13.878113] [c4] systemd[1]: Listening on Journal Socket (/dev/log).
[   13.884958] [c4] systemd[1]: Starting udev Control Socket.
[   13.903133] [c5] systemd[1]: Listening on udev Control Socket.
[   13.909480] [c5] systemd[1]: Starting udev Kernel Socket.
[   13.928118] [c6] systemd[1]: Listening on udev Kernel Socket.
[   13.934351] [c6] systemd[1]: Starting Journal Socket.
[   13.953095] [c6] systemd[1]: Listening on Journal Socket.
[   13.958965] [c6] systemd[1]: Starting System Slice.
[   13.978117] [c7] systemd[1]: Created slice System Slice.
[   13.983894] [c7] systemd[1]: Started File System Check on Root Device.
[   13.990875] [c7] systemd[1]: Starting system-systemd\x2dfsck.slice.
[   14.013122] [c4] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   14.020284] [c4] systemd[1]: Starting system-getty.slice.
[   14.038118] [c5] systemd[1]: Created slice system-getty.slice.
[   14.044436] [c5] systemd[1]: Starting system-serial\x2dgetty.slice.
[   14.063117] [c6] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   14.070398] [c6] systemd[1]: Starting Increase datagram queue length...
[   14.090979] [c7] systemd[1]: Starting udev Coldplug all Devices...
[   14.111158] [c7] systemd[1]: Mounting Debug File System...
[   14.162927] [c7] systemd[1]: Starting Load Kernel Modules...
[   14.186045] [c7] systemd[1]: Mounting POSIX Message Queue File System...
[   14.204911] [c4] systemd[1]: Started Set Up Additional Binary Formats.
[   14.212222] [c4] systemd[1]: Mounted Huge Pages File System.
[   14.220467] [c4] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   14.249269] [c5] fuse init (API version 7.22)
[   14.252965] [c4] systemd[1]: Starting Slices.
[   14.268127] [c4] systemd[1]: Reached target Slices.
[   14.288116] [c4] systemd[1]: Mounted POSIX Message Queue File System.
[   14.308107] [c4] systemd[1]: Mounted Debug File System.
[   14.328135] [c4] systemd[1]: Started Increase datagram queue length.
[   14.358143] [c5] systemd[1]: Started Load Kernel Modules.
[   14.383168] [c6] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   14.426993] [c6] systemd[1]: Starting Create Static Device Nodes in /dev...
[   14.451471] [c6] systemd[1]: Starting Apply Kernel Variables...
[   14.471817] [c6] systemd[1]: Mounting Configuration File System...
[   14.491499] [c6] systemd[1]: Mounting FUSE Control File System...
[   14.511465] [c4] systemd[1]: Starting Syslog Socket.
[   14.528242] [c4] systemd[1]: Listening on Syslog Socket.
[   14.534223] [c4] systemd[1]: Starting Journal Service...
[   14.568151] [c4] systemd[1]: Started Journal Service.
[   14.700263] [c4] systemd-udevd[249]: starting version 215
[   15.116888] [c5] [d:0, c:0] s5p_mfc_open:1629: NORMAL instance is opened [0:1]
[   15.126035] [c5] [d:0] s5p_mfc_alloc_firmware:122: Port for DRM F/W : 0xafc00000
[   15.136303] [c5] [d:0] s5p_mfc_init_memctrl:304: [1] Base Address : 10000000
[   15.144653] [c5] [d:0] mfc_init_hw:426: MFC v8.0, F/W: 14yy, 01mm, 13dd (D)
[   15.153130] [c5] [d:0, c:0] s5p_mfc_open:1725: MFC open completed [0:1] dev = dd918810, ctx = dd375800
[   15.163680] [c5] [d:0, c:1] s5p_mfc_open:1629: NORMAL instance is opened [0:2]
[   15.172322] [c4] s3c-i2c 12c60000.i2c: slave address 0x00
[   15.179235] [c0] s3c64xx-spi 12d30000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[   15.179247] [c5] [d:0, c:1] s5p_mfc_open:1725: MFC open completed [0:2] dev = dd918810, ctx = dd376000
[   15.179513] [c5] [d:0, c:1] s5p_mfc_release:1883: MFC driver release is called [0:2], is_drm(0)
[   15.179600] [c5] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:1], dev = dd918810
[   15.179632] [c7] [d:0, c:0] s5p_mfc_release:1883: MFC driver release is called [0:1], is_drm(0)
[   15.179798] [c7] s5p_mfc_dev_release:1801: power off
[   15.180493] [c7] [d:0] s5p_mfc_release:2037: mfc driver release finished [0:0], dev = dd918810
[   15.257229] [c4] s3c64xx-spi 12d30000.spi: number of chip select lines not specified, assuming 1 chip select line
[   15.264840] [c5] i2c-core: driver [INA231] using legacy suspend method
[   15.264847] [c5] i2c-core: driver [INA231] using legacy resume method
[   15.266403] [c7] INA231 3-0040: I2C write error: (-6) reg: 0x0
[   15.266409] [c7] INA231 3-0040: ============= Probe INA231 Fail! : sensor_arm (0xFFFFFFFA) =============
[   15.276608] [c7] INA231 3-0041: I2C write error: (-6) reg: 0x0
[   15.276621] [c7] INA231 3-0041: ============= Probe INA231 Fail! : sensor_mem (0xFFFFFFFA) =============
[   15.283509] [c7] INA231 3-0044: I2C write error: (-6) reg: 0x0
[   15.283518] [c7] INA231 3-0044: ============= Probe INA231 Fail! : sensor_g3d (0xFFFFFFFA) =============
[   15.289400] [c7] INA231 3-0045: I2C write error: (-6) reg: 0x0
[   15.289410] [c7] INA231 3-0045: ============= Probe INA231 Fail! : sensor_kfc (0xFFFFFFFA) =============
[   15.289511] [c7] s3c-i2c 12c60000.i2c: i2c-3: S3C I2C adapter
[   15.290070] [c7] s3c-i2c 12c70000.i2c: slave address 0x00
[   15.291000] [c7] s3c-i2c 12c70000.i2c: i2c-4: S3C I2C adapter
[   15.369171] [c4] of_get_named_gpio_flags exited with status 190
[   15.371958] [c5] PM DOMAIN: pd-isp, Device : 131a0000.spi Registered
[   15.380247] [c5] s3c64xx-spi 131a0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[   15.391263] [c5] s3c64xx-spi 131a0000.spi: number of chip select lines not specified, assuming 1 chip select line
[   15.404718] [c4] PM DOMAIN: pd-isp, Device : 131b0000.spi Registered
[   15.412524] [c4] s3c64xx-spi 131b0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
[   15.423899] [c4] s3c64xx-spi 131b0000.spi: number of chip select lines not specified, assuming 1 chip select line
[   15.880015] [c3] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[   16.020703] [c5] usbcore: registered new interface driver r8152
[   16.037559] [c4] usbcore: registered new interface driver cdc_ether
[   16.179802] [c5] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[   16.198417] [c5] usb 6-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[   16.211477] [c5] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd9c4180
[   16.221846] [c5] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd9c41ac
[   16.232102] [c5] xhci-hcd xhci-hcd.5.auto: xHCI xhci_drop_endpoint called with disabled ep dd9c41d8
[   16.331129] [c5] r8152 6-1:1.0 eth0: v2.06.0 (2016/01/14)
[   16.337683] [c5] r8152 6-1:1.0 eth0: This product is covered by one or more of the following patents:
        US6,570,884, US6,115,776, and US6,327,625.

[   16.784764] [c7] systemd-journald[248]: Received request to flush runtime journal from PID 1
[   17.131792] [c4] RTL871X: module init start
[   17.137032] [c4] RTL871X: rtl8812au v4.2.5_10143.20140103_ASUS
[   17.143934] [c4] RTL871X: build time: May 13 2016 14:16:26
[   17.150682] [c4] RTL871X:
usb_endpoint_descriptor(0):
[   17.161091] [c4] RTL871X: bLength=7
[   17.165611] [c4] RTL871X: bDescriptorType=5
[   17.172205] [c4] RTL871X: bEndpointAddress=81
[   17.178957] [c4] RTL871X: wMaxPacketSize=512
[   17.184214] [c4] RTL871X: bInterval=0
[   17.188842] [c4] RTL871X: RT_usb_endpoint_is_bulk_in = 1
[   17.195108] [c4] RTL871X:
usb_endpoint_descriptor(1):
[   17.205032] [c4] RTL871X: bLength=7
[   17.209518] [c4] RTL871X: bDescriptorType=5
[   17.214609] [c4] RTL871X: bEndpointAddress=2
[   17.219780] [c4] RTL871X: wMaxPacketSize=512
[   17.224981] [c4] RTL871X: bInterval=0
[   17.229542] [c4] RTL871X: RT_usb_endpoint_is_bulk_out = 2
[   17.235847] [c4] RTL871X:
usb_endpoint_descriptor(2):
[   17.245517] [c4] RTL871X: bLength=7
[   17.249856] [c4] RTL871X: bDescriptorType=5
[   17.254863] [c4] RTL871X: bEndpointAddress=3
[   17.259936] [c4] RTL871X: wMaxPacketSize=512
[   17.264989] [c4] RTL871X: bInterval=0
[   17.269413] [c4] RTL871X: RT_usb_endpoint_is_bulk_out = 3
[   17.275567] [c4] RTL871X:
usb_endpoint_descriptor(3):
[   17.284910] [c4] RTL871X: bLength=7
[   17.289051] [c4] RTL871X: bDescriptorType=5
[   17.293871] [c4] RTL871X: bEndpointAddress=4
[   17.298760] [c4] RTL871X: wMaxPacketSize=512
[   17.303619] [c4] RTL871X: bInterval=0
[   17.307781] [c4] RTL871X: RT_usb_endpoint_is_bulk_out = 4
[   17.313687] [c4] RTL871X:
usb_endpoint_descriptor(4):
[   17.322641] [c4] RTL871X: bLength=7
[   17.326601] [c4] RTL871X: bDescriptorType=5
[   17.331230] [c4] RTL871X: bEndpointAddress=85
[   17.336004] [c4] RTL871X: wMaxPacketSize=64
[   17.340573] [c4] RTL871X: bInterval=1
[   17.344594] [c4] RTL871X: RT_usb_endpoint_is_int_in = 5, Interval = 1
[   17.351391] [c4] RTL871X: nr_endpoint=5, in_num=2, out_num=3

[   17.360588] [c4] RTL871X: USB_SPEED_HIGH
[   17.364867] [c4] RTL871X: CHIP TYPE: RTL8812
[   17.369477] [c4] RTL871X: register rtw_netdev_ops to netdev_ops
[   17.375968] [c4] RTL871X: ReadChipVersion8812A SYS_CFG(0xF0)=0x04411137
[   17.383111] [c4] RTL871X: Chip Version Info: CHIP_8812_Normal_Chip_TSMC_C_CUT_2T2R_RomVer(0)
[   17.391842] [c4] RTL871X: RF_Type is 2!!
[   17.396022] [c4] RTL871X: _ConfigChipOutEP_8812 OutEpQueueSel(0x07), OutEpNumber(3)
[   17.404023] [c4] RTL871X: ====> ReadAdapterInfo8812AU
[   17.409392] [c4] RTL871X: Boot from EFUSE, Autoload OK !
[   17.568363] [c7] RTL871X: EEPROM ID=0x8129
[   17.572626] [c7] RTL871X: VID = 0x2357, PID = 0x0101
[   17.577817] [c7] RTL871X: Customer ID: 0x00, SubCustomer ID: 0xCD
[   17.584113] [c7] RTL871X: hal_ReadMACAddress_8812AU MAC Address from EFUSE = ec:08:6b:08:76:48
[   17.592941] [c7] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[   17.601662] [c7] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[   17.610389] [c7] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[   17.619092] [c7] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[   17.627737] [c7] RTL871X: EEPROMRegulatory = 0x1 TxPwrCalibrateRate=0x0
[   17.634491] [c7] RTL871X: Board Type: 0x 0
[   17.638692] [c7] RTL871X: mlmepriv.ChannelPlan = 0x7f
[   17.643861] [c7] RTL871X: CrystalCap: 0x1b
[   17.648023] [c7] RTL871X: ThermalMeter = 0x1c
[   17.652371] [c7] RTL871X: SWAS: bHwAntDiv = 0, TRxAntDivType = 3
[   17.658427] [c7] RTL871X: pHalData->PAType_2G is 0x3, pHalData->ExternalPA_2G = 0
[   17.665976] [c7] RTL871X: pHalData->PAType_5G is 0x3, pHalData->ExternalPA_5G = 1
[   17.673520] [c7] RTL871X: pHalData->LNAType_2G is 0x0, pHalData->ExternalLNA_2G = 0
[   17.681244] [c7] RTL871X: pHalData->LNAType_5G is 0x88, pHalData->ExternalLNA_5G = 1
[   17.689047] [c7] RTL871X: pHalData->TypeGPA = 0x0
[   17.693816] [c7] RTL871X: pHalData->TypeAPA = 0x0
[   17.698582] [c7] RTL871X: pHalData->TypeGLNA = 0x0
[   17.703435] [c7] RTL871X: pHalData->TypeALNA = 0x0
[   17.708277] [c7] RTL871X: RFE Type: 0x 0
[   17.712191] [c7] RTL871X: PID= 0x101, VID=  2357
[   17.716847] [c7] RTL871X: PID= 0x101, VID=  2357
[   17.721496] [c7] RTL871X: Customer ID: 0x 0
[   17.727822] [c7] RTL871X: ReadAdapterInfo8812AU <====
[   17.733133] [c7] RTL871X: init_channel_set ChannelPlan ID 7f Chan num:38
[   17.740631] [c7] RTL871X: can't get autopm:
[   17.744992] [c7] RTL871X: rtw_macaddr_cfg MAC Address  = ec:08:6b:08:76:48
[   17.751979] [c7] RTL871X: bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[   17.760390] [c7] RTL871X: rtw_ndev_init(wlan0)
[   17.765939] [c7] RTL871X: _rtw_drv_register_netdev, MAC Address (if1) = ec:08:6b:08:76:48
[   17.774397] [c7] usbcore: registered new interface driver rtl8812au
[   17.780848] [c7] RTL871X: module init ret=0
[   18.031260] [c6] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.191309] [c7] cfg80211: Calling CRDA to update world regulatory domain
[   20.249750] [c5] cfg80211: World regulatory domain updated:
[   20.255722] [c5] cfg80211:  DFS Master region: unset
[   20.259145] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.270859] [c5] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.279681] [c5] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.289277] [c5] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.298913] [c5] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   20.310036] [c5] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   20.320714] [c5] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   20.329566] [c5] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   20.338381] [c5] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   20.894627] [c4] RTL871X: LeaveAllPowerSaveMode(wlan0): bup=0 Skip!
[   20.899539] [c4] RTL871X: rtw_wx_set_scan: bDriverStopped=1, bup=0, hw_init_completed=0
[   20.912169] [c4] RTL871X: +871x_drv - drv_open, bup=0
[   20.916395] [c4] RTL871X:  power-on :REG_SYS_CLKR 0x09=0xfc. REG_CR 0x100=0xff.
[   20.923143] [c4] RTL871X:  MAC has already power on.
[   20.932106] [c4] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[   21.016135] [c6] RTL871X: FirmwareDownload8812 fw source from Header
[   21.021176] [c6] RTL871X: FirmwareDownload8812 fw:NIC, size: 32060
[   21.027278] [c6] RTL871X: FirmwareDownload8812: fw_ver=25 fw_subver=0 sig=0x9501
[   21.035944] [c6] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   21.089055] [c6] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070705
[   21.098058] [c6] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   21.128672] [c6] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (254, 35ms), REG_MCUFWDL:0x000707c6
[   21.136318] [c6] RTL871X: FWDL success. write_fw:1, 90ms
[   21.141622] [c6] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[   21.166025] [c6] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 1
[   21.171915] [c6] RTL871X: PHY_ConfigRFWithPowerLimitTableParaFile(): No File rtl8812A/TXPWR_LMT.txt, Load from HWImg Array!
[   21.200991] [c6] RTL871X: phy_ConfigBBWithPgParaFile(): No File rtl8812A/PHY_REG_PG.txt, Load from HWImg Array!
[   21.581030] [c4] RTL871X: pDM_Odm TxPowerTrackControl = 1
[   21.586249] [c4] RTL871X: MAC Address from REG_MACID = ec:08:6b:08:76:48
[   21.591695] [c4] RTL871X: rtl8812au_hal_init in 675ms
[   21.597068] [c4] RTL871X: hw_var_set_opmode()-5243 mode = 1
[   21.602698] [c4] RTL871X: MAC Address = ec:08:6b:08:76:48
[   21.608034] [c5] RTL871X: -871x_drv - drv_open, bup=1
[   21.612761] [c5] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.542618] [c7] RTL871X: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[   22.546953] [c7] RTL871X: set_mode = IW_MODE_INFRA
[   22.552163] [c7] RTL871X: set bssid:00:00:00:00:00:00
[   22.552792] [c5] RTL871X: hw_var_set_opmode()-5243 mode = 2
[   22.562798] [c5] RTL871X: =>rtw_wx_set_essid
[   22.566614] [c5] RTL871X: ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)ͺ\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9fɚ, len=32
[   22.573175] [c5] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)ͺ\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9fɚ\xffffffcc/\xffffffbf\xffffff98܌\xffffff90o\xffffffc0\xffffff8b] fw_state=0x00000008
[   22.582475] [c5] RTL871X: Set SSID under fw_state=0x00000008
[   22.588325] [c5] RTL871X: <=rtw_wx_set_essid, ret 0
[   22.663448] [c5] RTL871X: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[   28.260307] [c5] RTL871X: survey done event(27) band:0 for wlan0
[   28.264946] [c5] RTL871X: rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
[   28.273755] [c5] RTL871X: try_to_join, but select scanning queue fail, to_roam:0
[   28.281126] [c5] RTL871X: indicate disassoc
[   28.285502] [c7] RTL871X: rtw_indicate_scan_done(wlan0)
[   28.290690] [c7] RTL871X: rtl8812_set_FwJoinBssReport_cmd mstatus(0)
[   28.296881] [c7] RTL871X: beamforming_deinit_entry Idx 0
[   28.302148] [c7] RTL871X: beamforming_notify BeamformState 0 bSounding 0
[   28.315019] [c4] RTL871X: ==>rtw_ps_processor .fw_state(8)
[   28.319113] [c4] RTL871X: ==>ips_enter cnts:1
[   28.323432] [c4] RTL871X: nolinked power save enter
[   28.328301] [c4] RTL871X: ===> rtw_ips_pwr_down...................
[   28.334454] [c4] RTL871X: ====> rtw_ips_dev_unload...
[   28.351354] [c4] RTL871X: usb_read_port_cancel
[   28.354557] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.354616] [c6] RTL871X: wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
[   28.354627] [c6] RTL871X: _rtw_pwr_wakeup wait ps_processing...
[   28.377448] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.388475] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.399474] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.410570] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.421523] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.432536] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.443609] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
[   28.454520] [c4] RTL871X: usb_write_port_cancel
[   28.459284] [c4] RTL871X: ==> rtl8812au_hal_deinit
[   28.464860] [c4] RTL871X:  hal_poweroff_8812au
[   28.471801] [c4] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   28.481296] [c4] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[   28.485621] [c4] RTL871X: <=== rtw_ips_pwr_down..................... in 155ms
[   28.503134] [c4] RTL871X: _rtw_pwr_wakeup wait ps_processing done
[   28.507747] [c4] RTL871X: _rtw_pwr_wakeup call ips_leave....
[   28.513460] [c4] RTL871X: ==>ips_leave cnts:1
[   28.517724] [c4] RTL871X: ===>  rtw_ips_pwr_up..............
[   28.523457] [c4] RTL871X: ===> ips_netdrv_open.........
[   28.528841] [c4] RTL871X:  power-on :REG_SYS_CLKR 0x09=0xb0. REG_CR 0x100=0xea.
[   28.535932] [c4] RTL871X:  MAC has not been powered on yet.
[   28.545241] [c4] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[   28.620891] [c4] RTL871X: FirmwareDownload8812 fw source from Header
[   28.625848] [c4] RTL871X: FirmwareDownload8812 fw:NIC, size: 32060
[   28.631988] [c4] RTL871X: FirmwareDownload8812: fw_ver=25 fw_subver=0 sig=0x9501
[   28.686947] [c4] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070705
[   28.695763] [c4] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[   28.726476] [c4] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (231, 30ms), REG_MCUFWDL:0x000707c6
[   28.734126] [c4] RTL871X: FWDL success. write_fw:1, 95ms
[   28.739413] [c4] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[   28.765526] [c4] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 1
[   28.771388] [c4] RTL871X: PHY_ConfigRFWithPowerLimitTableParaFile(): No File rtl8812A/TXPWR_LMT.txt, Load from HWImg Array!
[   28.804080] [c4] RTL871X: phy_ConfigBBWithPgParaFile(): No File rtl8812A/PHY_REG_PG.txt, Load from HWImg Array!
[   29.153982] [c5] RTL871X: pDM_Odm TxPowerTrackControl = 1
[   29.159244] [c5] RTL871X: MAC Address from REG_MACID = ec:08:6b:08:76:48
[   29.164668] [c5] RTL871X: rtl8812au_hal_init in 635ms
[   29.170005] [c5] RTL871X: hw_var_set_opmode()-5243 mode = 1
[   29.175673] [c5] RTL871X: <===  rtw_ips_pwr_up.............. in 660ms
[   29.181664] [c5] RTL871X: nolinked power save leave
[   29.186608] [c5] RTL871X: ==> ips_leave.....LED(0x00282828)...
[   29.192341] [c5] RTL871X: set_mode = IW_MODE_INFRA
[   29.197278] [c5] RTL871X:
 wpa_ie(length:22):
[   29.197881] [c4] RTL871X: hw_var_set_opmode()-5243 mode = 2
[   29.208482] [c5] RTL871X: 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
[   29.214644] [c5] RTL871X: 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
[   29.220799] [c5] RTL871X: 0x00 0x0f 0xac 0x02 0x00 0x00 0x9c 0xdd
[   29.227359] [c5] RTL871X: SetHwReg8812A, 5992, RCR= f40060ca
[   29.232852] [c5] RTL871X: =>rtw_wx_set_essid
[   29.236867] [c5] RTL871X: ssid=blub, len=4
[   29.241040] [c5] RTL871X: set ssid [blub] fw_state=0x00000008
[   29.246686] [c5] RTL871X: Set SSID under fw_state=0x00000008
[   29.252281] [c5] RTL871X: [by_bssid:0][assoc_ssid:blub][to_roam:0] new candidate: blub(14:91:82:2e:1d:3e, ch6) rssi:-63
[   29.263041] [c5] RTL871X: rtw_select_and_join_from_scanned_queue: candidate: blub(14:91:82:2e:1d:3e, ch:6)
[   29.272672] [c5] RTL871X: [HT] Support LDPC = 0x03
[   29.277430] [c5] RTL871X: [HT] Support STBC = 0x01
[   29.282200] [c5] RTL871X: [HT] Support Beamformee
[   29.286887] [c5] RTL871X: declare supporting RX STBC
[   29.291835] [c5] RTL871X: [VHT] Support LDPC = 0x03
[   29.296692] [c5] RTL871X: [VHT] Support STBC = 0x03
[   29.301551] [c5] RTL871X: [VHT] Support Beamformee
[   29.306325] [c5] RTL871X: link to Marvell AP
[   29.310607] [c6] RTL871X: set HT ch/bw before connected
[   29.310740] [c5] RTL871X: <=rtw_wx_set_essid, ret 0
[   29.311343] [c5] RTL871X: set bssid:14:91:82:2e:1d:3e
[   29.311352] [c5] RTL871X: Set BSSID under fw_state=0x00000088
[   29.331446] [c6] RTL871X: start_join_set_ch_bw: ch=6, bwmode=1, ch_offset=2
[   29.401287] [c6] RTL871X: == IQK Start ==
[   29.453769] [c0] RTL871X: == IQK Finish ==
[   29.490653] [c0] RTL871X: link to Marvell AP
[   29.493482] [c0] RTL871X: start auth
[   29.497080] [c0] RTL871X: issue_auth
[   29.522722] [c0] RTL871X: OnAuthClient
[   29.525011] [c0] RTL871X: auth success, start assoc
[   29.529934] [c0] RTL871X: network.SupportedRates[0]=82
[   29.534988] [c0] RTL871X: network.SupportedRates[1]=84
[   29.540162] [c0] RTL871X: network.SupportedRates[2]=8B
[   29.545264] [c0] RTL871X: network.SupportedRates[3]=96
[   29.550346] [c0] RTL871X: network.SupportedRates[4]=0C
[   29.555591] [c0] RTL871X: network.SupportedRates[5]=12
[   29.560712] [c0] RTL871X: network.SupportedRates[6]=18
[   29.565851] [c0] RTL871X: network.SupportedRates[7]=24
[   29.571002] [c0] RTL871X: network.SupportedRates[8]=30
[   29.576065] [c0] RTL871X: network.SupportedRates[9]=48
[   29.581211] [c0] RTL871X: network.SupportedRates[10]=60
[   29.586380] [c0] RTL871X: network.SupportedRates[11]=6C
[   29.591613] [c0] RTL871X: bssrate_len = 12
[   29.625192] [c0] RTL871X: OnAssocRsp
[   29.627459] [c0] RTL871X: Current VHT LDPC Setting = 0A
[   29.632578] [c0] RTL871X: Current ShortGI80MHz = 1
[   29.637442] [c0] RTL871X: Current VHT STBC Setting = 0A
[   29.642564] [c0] RTL871X: Current VHT Beamforming Setting = 01
[   29.648412] [c0] RTL871X: report_join_res(2)
[   29.652559] [c0] RTL871X: rtw_joinbss_update_network
[   29.657566] [c0] RTL871X: +rtw_update_ht_cap()
[   29.662064] [c0] RTL871X: rtw_alloc_macid = 0
[   29.666344] [c0] RTL871X: rtw_joinbss_update_stainfo
[   29.671321] [c0] RTL871X: ### Set STA_(0) info
[   29.675701] [c0] RTL871X: assoc success
[   29.680281] [c0] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   29.686613] [c6] RTL871X: WMM(0): 0, a425
[   29.690500] [c6] RTL871X: WMM(1): 0, a449
[   29.691141] [c5] RTL871X: send eapol packet
[   29.698634] [c6] RTL871X: WMM(2): 0, 5e431c
[   29.699661] [c5] RTL871X: send eapol packet
[   29.699757] [c5] RTL871X:  ~~~~set sta key:unicastkey
[   29.699961] [c5] RTL871X:  ~~~~set sta key:groupkey
[   29.699971] [c5] RTL871X: ==> rtw_set_key algorithm(2),keyid(1),key_mask(0)
[   29.723762] [c6] RTL871X: WMM(3): 0, 2f321c
[   29.727682] [c6] RTL871X: wmm_para_seq(0): 0
[   29.732004] [c6] RTL871X: wmm_para_seq(1): 1
[   29.736270] [c6] RTL871X: wmm_para_seq(2): 2
[   29.740524] [c6] RTL871X: wmm_para_seq(3): 3
[   29.744774] [c6] RTL871X: HTOnAssocRsp
[   29.748770] [c6] RTL871X: VHTOnAssocRsp
[   29.752364] [c6] RTL871X: UpdateHalRAMask8812A => mac_id:0, networkType:0x43, mask:0xffffffff
     ==> rssi_level:0, rate_bitmap:0x0fffffff
[   29.767116] [c6] RTL871X: [MacId],  Set MacId Ctrl(original) = 0x10000
[   29.774616] [c6] RTL871X: rtl8812_set_FwJoinBssReport_cmd mstatus(1)
[   29.781295] [c6] RTL871X: SetFwRsvdPagePkt_8812: Set RSVD page location to Fw ,TotalPacketLen(2048), TotalPageNum(4)
[   29.791506] [c6] RTL871X: wlan0: 1 DL RSVD page success! DLBcnCount:1, poll:1
[   29.798506] [c6] RTL871X: Set RSVD page location to Fw.
[   29.802747] [c6] RTL871X: Beamforming Config Capability = 0x08
[   29.808550] [c6] RTL871X: beamforming_init_entry Idx 0
[   29.820506] [c6] RTL871X: beamforming_notify BeamformState 0 bSounding 0
[   29.825804] [c6] RTL871X: beamforming_enter Idx 0
[   29.830491] [c6] RTL871X: =>mlmeext_joinbss_event_callback
[   29.837504] [c6] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
[   29.844720] [c6] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
[   29.856256] [c5] RTL871X: SetHwReg8812A, 5985, RCR= f40060ce
[   31.189258] [c5] RTL871X: UpdateHalRAMask8812A => mac_id:0, networkType:0x43, mask:0xffffffff
     ==> rssi_level:2, rate_bitmap:0x0fffffff
[   35.189528] [c5] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[   35.202819] [c5] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[   40.869113] [c2] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_SPECIAL_PACKET
[   40.877138] [c2] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[   52.897158] [c0] RTL871X: survey done event(1c) band:0 for wlan0
[   52.902630] [c0] RTL871X: wlan0 cmd=18, process_time=1110 > 1 sec
[   52.909983] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
[   57.243936] [c1] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[   57.251182] [c1] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[   59.866862] [c3] set_aud_pll_rate[49] : aud_pll set_rate=180633600, get_rate = 180633609
[   59.914672] [c7] set_aud_pll_rate[49] : aud_pll set_rate=180633600, get_rate = 180633609
[   70.257429] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_LEAVE
[   70.265217] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[   73.284513] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[   73.292407] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[   89.034487] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_LEAVE
[   89.041828] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[   94.462995] [c0] RTL871X: survey done event(12) band:0 for wlan0
[   94.467906] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
[   94.609293] [c0] RTL871X: OnAction_back
[   94.611829] [c0] RTL871X: OnAction_back, action=0
[   94.616413] [c0] RTL871X: issue_action_BA, category=3, action=1, status=0
[   99.078424] [c0] RTL871X: rtw_issue_addbareq_cmd, p=0
[   99.082239] [c0] RTL871X: issue_action_BA, category=3, action=0, status=0
[   99.089044] [c0] RTL871X: BA_starting_seqctrl = 238 for TID=0
[   99.101916] [c0] RTL871X: OnAction_back
[   99.104398] [c0] RTL871X: OnAction_back, action=1
[   99.108996] [c0] RTL871X: agg_enable for TID=0
[   99.113433] [c0] RTL871X: Drop duplicate management frame with seq_num = 1666.
[  100.289086] [c0] RTL871X: rtw_issue_addbareq_cmd, p=4
[  100.292808] [c1] RTL871X: issue_action_BA, category=3, action=0, status=4
[  100.299600] [c1] RTL871X: BA_starting_seqctrl = 6 for TID=4
[  100.307928] [c0] RTL871X: OnAction_back
[  100.310529] [c0] RTL871X: OnAction_back, action=1
[  100.315156] [c0] RTL871X: agg_enable for TID=4
[  100.319631] [c0] RTL871X: Drop duplicate management frame with seq_num = 1679.
[  153.063099] [c0] RTL871X: wlan0 cmd=18, process_time=1030 > 1 sec
[  159.007818] [c0] RTL871X: issue_nulldata(wlan0) to 14:91:82:2e:1d:3e, ch:6, 3/3 in 1030 ms
[  159.015729] [c0] RTL871X: survey done event(17) band:0 for wlan0
[  159.021101] [c0] RTL871X: wlan0 cmd=18, process_time=1080 > 1 sec
[  159.030646] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
[  227.670259] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  227.677341] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  231.680257] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-TRAFFIC_BUSY
[  231.687348] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[  240.439236] [c1] RTL871X: survey done event(1c) band:0 for wlan0
[  240.444435] [c1] RTL871X: rtw_indicate_scan_done(wlan0)
[  245.715378] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  245.722430] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  247.720375] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-TRAFFIC_BUSY
[  247.727432] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[  249.725626] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  249.732930] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  251.730516] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-TRAFFIC_BUSY
[  251.737594] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[  253.735508] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  253.742588] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  255.740403] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  257.745380] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  259.750407] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  261.755420] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  263.760388] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  265.765522] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  267.770525] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  267.862549] [c0] RTL871X: issue_nulldata(wlan0) to 14:91:82:2e:1d:3e, ch:6, 3/3 in 85 ms
[  273.785512] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  275.790534] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  277.795516] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  279.800518] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  281.805514] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  283.810639] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  283.896091] [c0] RTL871X: issue_nulldata(wlan0) to 14:91:82:2e:1d:3e, ch:6, 3/3 in 80 ms
[  289.825633] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  291.830653] [c1] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  293.835866] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  295.840767] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  297.845763] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  299.850770] [c2] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  303.860899] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  305.865773] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  307.870916] [c1] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  309.875893] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  311.880895] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  313.885887] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  315.891118] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  319.900876] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  321.906010] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  323.910990] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  325.916002] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  327.921013] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  329.926008] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  331.930999] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  335.941131] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  337.946139] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  338.033871] [c0] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_LEAVE
[  338.041448] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[  342.936732] [c0] RTL871X: survey done event(18) band:0 for wlan0
[  342.941880] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
[  343.961252] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
[  343.968668] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[  347.971125] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  348.081706] [c0] RTL871X: issue_nulldata(wlan0) to 14:91:82:2e:1d:3e, ch:6, 3/3 in 105 ms
[  353.986250] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  355.991269] [c3] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  357.996262] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  360.001275] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  362.006374] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  364.011381] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  368.021367] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  370.026379] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  372.031376] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  374.036385] [c1] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  376.041381] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  378.046518] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  380.051521] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  380.144701] [c0] RTL871X: issue_nulldata(wlan0) to 14:91:82:2e:1d:3e, ch:6, 3/3 in 85 ms
[  386.066496] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  388.071489] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  390.076628] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  392.081873] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  394.086627] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  395.460029] [c0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  396.091636] [c0] RTL871X: rtl8812_sreset_xmit_status_check tx hang
[  396.197229] [c0] RTL871X: ###=> urb_write_port_complete status(-71)
[  396.202059] [c0] RTL871X: ###=> usb_read_port_complete => urb status(-71)
[  396.208879] [c0] RTL871X: ###=> urb_write_port_complete status(-71)
[  396.215068] [c0] RTL871X: ###=> usb_read_port_complete => urb status(-71)
[  396.221872] [c0] RTL871X: ###=> urb_write_port_complete status(-71)
[  396.228084] [c0] RTL871X: ###=> usb_read_port_complete => urb status(-71)
[  396.234897] [c0] RTL871X: ###=> urb_write_port_complete status(-71)
[  396.241099] [c0] RTL871X: ###=> usb_read_port_complete => urb status(-71)
[  396.247927] [c0] RTL871X: ###=> usb_read_port_complete => urb status(-71)
[  396.254611] [c0] RTL871X: [dvobj:dda6f000][ERROR] continual_io_error:5 > 4
[  396.261539] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(1) bReadPortCancel(0)
[  396.272530] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(1) bReadPortCancel(0)
[  396.283560] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(1) bReadPortCancel(0)
[  396.294599] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(1) bReadPortCancel(0)
[  396.305590] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(1) bReadPortCancel(0)
[  396.316608] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(1) bReadPortCancel(0)
[  396.327652] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(1) bReadPortCancel(0)
[  396.338771] [c0] RTL871X: xmit_tasklet => bDriverStopped or bSurpriseRemoved or bWritePortCancel
[  396.347500] [c0] RTL871X: xmit_tasklet => bDriverStopped or bSurpriseRemoved or bWritePortCancel
[  396.515322] [c0] usb 3-1.2: USB disconnect, device number 3
[  396.521132] [c0] RTL871X: +rtw_dev_remove
[  396.524490] [c0] RTL871X: (2)871x_drv - drv_close, bup=1, hw_init_completed=1
[  396.530885] [c0] RTL871X: LeaveAllPowerSaveMode(wlan0): bSurpriseRemoved=1 Skip!
[  396.538255] [c0] RTL871X: -871x_drv - drv_close, bup=1
[  396.546175] [c0] RTL871X: rtw_ndev_uninit(wlan0)
[  396.596635] [c3] RTL871X: rtw_pm_set_ips IPS_NONE
[  396.599878] [c3] RTL871X: LeaveAllPowerSaveMode(wlan0): bSurpriseRemoved=1 Skip!
[  396.608230] [c3] RTL871X: LeaveAllPowerSaveMode(wlan0): bSurpriseRemoved=1 Skip!
[  396.614754] [c3] RTL871X: rtw_sta_flush(wlan0)
[  396.620314] [c3] RTL871X: ### Clean STA_(0) info
[  396.623721] [c3] RTL871X: rtw_release_macid = 0
[  396.628282] [c3] RTL871X: ### Clean STA_(1) info
[  396.632843] [c3] RTL871X: ===> rtw_dev_unload
[  396.637241] [c5] RTL871X: usb_read_port_cancel
[  396.641599] [c5] RTL871X: usb_write_port_cancel
[  396.646206] [c0] RTL871X: rtw_cmd_thread: DriverStopped(1) SurpriseRemoved(1) break at line 478
[  396.655018] [c5] RTL871X: rtw_hal_check_ips_status: HalFunc.check_ips_status is NULL!
[  396.662665] [c5] RTL871X: rtw_dev_unload: driver not in IPS
[  396.668209] [c5] RTL871X: <=== rtw_dev_unload
[  396.672549] [c5] RTL871X: +r871xu_dev_remove, hw_init_completed=1
[  396.679066] [c5] RTL871X: 4free_recv_skb_queue not empty, 4
[  396.684312] [c5] RTL871X: -r871xu_dev_remove, done