Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.12
- Device Model: ST31000528AS
- Serial Number: 9VP9FRF3
- LU WWN Device Id: 5 000c50 02cb0a35d
- Firmware Version: CC38
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 4
- Local Time is: Mon Jun 17 23:05:50 2013 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 600) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 179) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 071 071 006 Pre-fail Always - 209206339
- 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 128
- 5 Reallocated_Sector_Ct 0x0033 077 077 036 Pre-fail Always - 947
- 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 326987348
- 9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 22052
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 64
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 63011
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295098370
- 189 High_Fly_Writes 0x003a 094 094 000 Old_age Always - 6
- 190 Airflow_Temperature_Cel 0x0022 062 053 045 Old_age Always - 38 (Min/Max 38/39)
- 194 Temperature_Celsius 0x0022 038 047 000 Old_age Always - 38 (0 10 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 023 018 000 Old_age Always - 209206339
- 197 Current_Pending_Sector 0x0012 091 091 000 Old_age Always - 390
- 198 Offline_Uncorrectable 0x0010 091 091 000 Old_age Offline - 390
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 279155694393036
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2940746741
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1470953060
- SMART Error Log Version: 1
- ATA Error Count: 63005 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 63005 occurred at disk power-on lifetime: 22052 hours (918 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 ff ff ff ef 00 00:24:18.387 READ DMA EXT
- 27 00 00 00 00 00 e0 00 00:24:18.384 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:24:18.375 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 00:24:18.328 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 00:24:18.320 READ NATIVE MAX ADDRESS EXT
- Error 63004 occurred at disk power-on lifetime: 22052 hours (918 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 30 ff ff ff ef 00 00:24:15.143 READ DMA EXT
- 25 00 20 ff ff ff ef 00 00:24:15.129 READ DMA EXT
- 25 00 08 ff ff ff ef 00 00:24:15.127 READ DMA EXT
- 25 00 08 ff ff ff ef 00 00:24:15.119 READ DMA EXT
- 25 00 08 ff ff ff ef 00 00:24:15.118 READ DMA EXT
- Error 63003 occurred at disk power-on lifetime: 22051 hours (918 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 ff ff ff ef 00 3d+02:16:20.550 READ DMA EXT
- ea 00 00 ff ff ff af 00 3d+02:16:17.444 FLUSH CACHE EXT
- 35 00 08 ff ff ff ef 00 3d+02:16:17.444 WRITE DMA EXT
- ea 00 00 ff ff ff af 00 3d+02:16:17.406 FLUSH CACHE EXT
- 35 00 80 ff ff ff ef 00 3d+02:16:17.405 WRITE DMA EXT
- Error 63002 occurred at disk power-on lifetime: 22051 hours (918 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 ff ff ff ef 00 3d+02:16:14.194 READ DMA EXT
- 27 00 00 00 00 00 e0 00 3d+02:16:14.193 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 3d+02:16:14.185 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 3d+02:16:14.179 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 3d+02:16:14.157 READ NATIVE MAX ADDRESS EXT
- Error 63001 occurred at disk power-on lifetime: 22051 hours (918 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 ff ff ff ef 00 3d+02:16:11.049 READ DMA EXT
- 27 00 00 00 00 00 e0 00 3d+02:16:11.048 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 3d+02:16:11.040 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 3d+02:16:11.032 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 3d+02:16:11.008 READ NATIVE MAX ADDRESS EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 14944 -
- # 2 Short offline Completed without error 00% 14936 -
- # 3 Short offline Completed without error 00% 14936 -
- # 4 Short offline Completed without error 00% 13241 -
- # 5 Short offline Completed without error 00% 13234 -
- # 6 Short offline Completed without error 00% 13234 -
- # 7 Short offline Completed without error 00% 13227 -
- # 8 Short offline Completed without error 00% 13203 -
- # 9 Short offline Completed without error 00% 13179 -
- #10 Short offline Completed without error 00% 13155 -
- #11 Short offline Completed without error 00% 13131 -
- #12 Short offline Completed without error 00% 13107 -
- #13 Extended offline Completed without error 00% 13087 -
- #14 Short offline Completed without error 00% 13083 -
- #15 Short offline Completed without error 00% 13059 -
- #16 Short offline Completed without error 00% 13035 -
- #17 Short offline Completed without error 00% 13011 -
- #18 Short offline Completed without error 00% 12987 -
- #19 Short offline Completed without error 00% 12963 -
- #20 Short offline Completed without error 00% 12939 -
- #21 Extended offline Completed without error 00% 12920 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement