Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root ~ # smartctl -x /dev/da6
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi Deskstar 5K3000
- Device Model: Hitachi HDS5C3030ALA630
- Serial Number: MJ1311YNG2AR3A
- LU WWN Device Id: 5 000cca 228c110f5
- Firmware Version: MEAOA580
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5700 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri May 29 21:18:16 2015 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Disabled
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (39068) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 651) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
- 2 Throughput_Performance P-S--- 133 133 054 - 114
- 3 Spin_Up_Time POS--- 127 127 024 - 547 (Average 547)
- 4 Start_Stop_Count -O--C- 100 100 000 - 1199
- 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
- 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
- 8 Seek_Time_Performance P-S--- 132 132 020 - 32
- 9 Power_On_Hours -O--C- 098 098 000 - 18893
- 10 Spin_Retry_Count PO--C- 100 100 060 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 444
- 192 Power-Off_Retract_Count -O--CK 099 099 000 - 1541
- 193 Load_Cycle_Count -O--C- 099 099 000 - 1541
- 194 Temperature_Celsius -O---- 142 142 000 - 42 (Min/Max 16/49)
- 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
- 197 Current_Pending_Sector -O---K 100 100 000 - 0
- 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
- 0x04 GPL R/O 7 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 1 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x20 GPL R/O 1 Streaming performance log [OBS-8]
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 18873 -
- # 2 Extended offline Completed without error 00% 18870 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 256 (0x0100)
- SCT Support Level: 1
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 42 Celsius
- Power Cycle Min/Max Temperature: 41/45 Celsius
- Lifetime Min/Max Temperature: 16/49 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -40/70 Celsius
- Temperature History Size (Index): 128 (70)
- Index Estimated Time Temperature Celsius
- 71 2015-05-29 19:11 43 ************************
- ... ..( 14 skipped). .. ************************
- 86 2015-05-29 19:26 43 ************************
- 87 2015-05-29 19:27 44 *************************
- ... ..( 9 skipped). .. *************************
- 97 2015-05-29 19:37 44 *************************
- 98 2015-05-29 19:38 43 ************************
- ... ..( 14 skipped). .. ************************
- 113 2015-05-29 19:53 43 ************************
- 114 2015-05-29 19:54 44 *************************
- ... ..( 13 skipped). .. *************************
- 0 2015-05-29 20:08 44 *************************
- 1 2015-05-29 20:09 43 ************************
- ... ..( 12 skipped). .. ************************
- 14 2015-05-29 20:22 43 ************************
- 15 2015-05-29 20:23 44 *************************
- ... ..( 17 skipped). .. *************************
- 33 2015-05-29 20:41 44 *************************
- 34 2015-05-29 20:42 43 ************************
- 35 2015-05-29 20:43 44 *************************
- 36 2015-05-29 20:44 43 ************************
- ... ..( 9 skipped). .. ************************
- 46 2015-05-29 20:54 43 ************************
- 47 2015-05-29 20:55 44 *************************
- ... ..( 9 skipped). .. *************************
- 57 2015-05-29 21:05 44 *************************
- 58 2015-05-29 21:06 43 ************************
- ... ..( 3 skipped). .. ************************
- 62 2015-05-29 21:10 43 ************************
- 63 2015-05-29 21:11 42 ***********************
- 64 2015-05-29 21:12 43 ************************
- 65 2015-05-29 21:13 43 ************************
- 66 2015-05-29 21:14 43 ************************
- 67 2015-05-29 21:15 42 ***********************
- ... ..( 2 skipped). .. ***********************
- 70 2015-05-29 21:18 42 ***********************
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Description
- 1 ===== = = == General Statistics (rev 1) ==
- 1 0x008 4 444 Lifetime Power-On Resets
- 1 0x010 4 18893 Power-on Hours
- 1 0x018 6 14571215977 Logical Sectors Written
- 1 0x020 6 58342874 Number of Write Commands
- 1 0x028 6 2250122414108 Logical Sectors Read
- 1 0x030 6 70761832 Number of Read Commands
- 3 ===== = = == Rotating Media Statistics (rev 1) ==
- 3 0x008 4 16085 Spindle Motor Power-on Hours
- 3 0x010 4 16085 Head Flying Hours
- 3 0x018 4 1541 Head Load Events
- 3 0x020 4 0 Number of Reallocated Logical Sectors
- 3 0x028 4 0 Read Recovery Attempts
- 3 0x030 4 0 Number of Mechanical Start Failures
- 4 ===== = = == General Errors Statistics (rev 1) ==
- 4 0x008 4 0 Number of Reported Uncorrectable Errors
- 4 0x010 4 784 Resets Between Cmd Acceptance and Completion
- 5 ===== = = == Temperature Statistics (rev 1) ==
- 5 0x008 1 42 Current Temperature
- 5 0x010 1 42~ Average Short Term Temperature
- 5 0x018 1 41~ Average Long Term Temperature
- 5 0x020 1 49 Highest Temperature
- 5 0x028 1 16 Lowest Temperature
- 5 0x030 1 45~ Highest Average Short Term Temperature
- 5 0x038 1 25~ Lowest Average Short Term Temperature
- 5 0x040 1 41~ Highest Average Long Term Temperature
- 5 0x048 1 25~ Lowest Average Long Term Temperature
- 5 0x050 4 0 Time in Over-Temperature
- 5 0x058 1 60 Specified Maximum Operating Temperature
- 5 0x060 4 0 Time in Under-Temperature
- 5 0x068 1 0 Specified Minimum Operating Temperature
- 6 ===== = = == Transport Statistics (rev 1) ==
- 6 0x008 4 1331 Number of Hardware Resets
- 6 0x010 4 750 Number of ASR Events
- 6 0x018 4 0 Number of Interface CRC Errors
- |_ ~ normalized value
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement