Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- login as: xbmc
- xbmc@192.168.1.103's password:
- Last login: Fri Jan 17 12:44:25 2014 from 192.168.1.100
- xbmc@xbmc-desktop:~$ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.11.0-15-generic (buildd@tipua) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #23-Ubuntu SMP Mon Dec 9 18:16:27 UTC 2013 (Ubuntu 3.11.0-15.23-generic 3.11.10)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000977ff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000097800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff7ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007ff80000-0x000000007ff8ffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ffdffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.5 present.
- [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./G41M-GS3, BIOS P1.30 01/12/2011
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x7ff80 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 disabled
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
- [ 0.000000] Base memory trampoline at [c0093000] 93000 size 16384
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
- [ 0.000000] [mem 0x37800000-0x379fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
- [ 0.000000] [mem 0x34000000-0x377fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
- [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
- [ 0.000000] BRK [0x01b49000, 0x01b49fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x35ece000-0x36f5efff]
- [ 0.000000] ACPI: RSDP 000f9740 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 7ff80000 00040 (v01 011211 RSDT2132 20110112 MSFT 00000097)
- [ 0.000000] ACPI: FACP 7ff80200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 7ff80440 058A2 (v01 AS310 AS310121 00000121 INTL 20051117)
- [ 0.000000] ACPI: FACS 7ff90000 00040
- [ 0.000000] ACPI: APIC 7ff80390 0006C (v01 011211 APIC2132 20110112 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 7ff80400 0003C (v01 011211 OEMMCFG 20110112 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 7ff90040 00072 (v01 011211 OEMB2132 20110112 MSFT 00000097)
- [ 0.000000] ACPI: AAFT 7ff88440 00027 (v01 011211 OEMAAFT 20110112 MSFT 00000097)
- [ 0.000000] ACPI: HPET 7ff88470 00038 (v01 011211 OEMHPET 20110112 MSFT 00000097)
- [ 0.000000] ACPI: GSCI 7ff900c0 02024 (v01 011211 GMCHSCI 20110112 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1155MB HIGHMEM available.
- [ 0.000000] 891MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 37bfe000
- [ 0.000000] low ram: 0 - 37bfe000
- [ 0.000000] BRK [0x01b4a000, 0x01b4afff] PGTABLE
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
- [ 0.000000] HighMem [mem 0x37bfe000-0x7ff7ffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x00096fff]
- [ 0.000000] node 0: [mem 0x00100000-0x7ff7ffff]
- [ 0.000000] On node 0 totalpages: 524054
- [ 0.000000] free_area_init_node: node 0, pgdat c1958bc0, node_mem_map f4ece020
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3990 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1752 pages used for memmap
- [ 0.000000] Normal zone: 224254 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2312 pages used for memmap
- [ 0.000000] HighMem zone: 295810 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x00097fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
- [ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bba000 s36288 r0 d21056 u57344
- [ 0.000000] pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522270
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c78b8d16-b644-4c06-bde5-0c0c0a087c2b ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
- [ 0.000000] allocated 4193272 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007ff80)
- [ 0.000000] Memory: 2046064K/2096216K available (6358K kernel code, 611K rwdata, 2692K rodata, 880K init, 908K bss, 50152K reserved, 1183240K highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
- [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
- [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
- [ 0.000000] .init : 0xc1972000 - 0xc1a4e000 ( 880 kB)
- [ 0.000000] .data : 0xc1635ee4 - 0xc1971f80 (3312 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1635ee4 (6359 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
- [ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2602.114 MHz processor
- [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5204.22 BogoMIPS (lpj=10408456)
- [ 0.004005] pid_max: default: 32768 minimum: 301
- [ 0.004037] Security Framework initialized
- [ 0.004055] AppArmor: AppArmor initialized
- [ 0.004057] Yama: becoming mindful.
- [ 0.004104] Mount-cache hash table entries: 512
- [ 0.008116] Initializing cgroup subsys memory
- [ 0.008127] Initializing cgroup subsys devices
- [ 0.008129] Initializing cgroup subsys freezer
- [ 0.008131] Initializing cgroup subsys blkio
- [ 0.008133] Initializing cgroup subsys perf_event
- [ 0.008136] Initializing cgroup subsys hugetlb
- [ 0.008162] CPU: Physical Processor ID: 0
- [ 0.008163] CPU: Processor Core ID: 0
- [ 0.008166] mce: CPU supports 6 MCE banks
- [ 0.008174] CPU0: Thermal monitoring enabled (TM2)
- [ 0.008185] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
- [ 0.008185] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
- [ 0.008185] tlb_flushall_shift: -1
- [ 0.008482] Freeing SMP alternatives memory: 28K (c1a4e000 - c1a55000)
- [ 0.010431] ACPI: Core revision 20130517
- [ 0.013190] ACPI: All ACPI Tables successfully acquired
- [ 0.016009] ftrace: allocating 27182 entries in 54 pages
- [ 0.024096] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.024464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.066136] smpboot: CPU0: Intel(R) Celeron(R) CPU E3400 @ 2.60GHz (fam: 06, model: 17, stepping: 0a)
- [ 0.068000] APIC calibration not consistent with PM-Timer: 155ms instead of 100ms
- [ 0.068000] APIC delta adjusted to PM-Timer: 1250972 (1951496)
- [ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
- [ 0.068000] ... version: 2
- [ 0.068000] ... bit width: 40
- [ 0.068000] ... generic registers: 2
- [ 0.068000] ... value mask: 000000ffffffffff
- [ 0.068000] ... max period: 000000007fffffff
- [ 0.068000] ... fixed-purpose events: 3
- [ 0.068000] ... event mask: 0000000700000003
- [ 0.068000] CPU 1 irqstacks, hard=f70f4000 soft=f70f6000
- [ 0.008000] Initializing CPU#1
- [ 0.068000] smpboot: Booting Node 0, Processors #1
- [ 0.078854] Brought up 2 CPUs
- [ 0.078858] smpboot: Total of 2 processors activated (10408.45 BogoMIPS)
- [ 0.078964] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.080110] devtmpfs: initialized
- [ 0.080339] EVM: security.selinux
- [ 0.080341] EVM: security.SMACK64
- [ 0.080342] EVM: security.capability
- [ 0.080359] PM: Registering ACPI NVS region [mem 0x7ff90000-0x7ffdffff] (327680 bytes)
- [ 0.081233] regulator-dummy: no parameters
- [ 0.081263] RTC time: 8:06:11, date: 01/21/14
- [ 0.081311] NET: Registered protocol family 16
- [ 0.081478] EISA bus registered
- [ 0.081562] ACPI: bus type PCI registered
- [ 0.081565] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.081624] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
- [ 0.081626] PCI: not using MMCONFIG
- [ 0.081770] PCI: Using configuration type 1 for base access
- [ 0.081898] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.081899] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.081901] mtrr: corrected configuration.
- [ 0.081901] bio: create slab <bio-0> at 0
- [ 0.081901] ACPI: Added _OSI(Module Device)
- [ 0.081901] ACPI: Added _OSI(Processor Device)
- [ 0.081901] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.081901] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.081901] ACPI: EC: Look up EC in DSDT
- [ 0.082392] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.085392] ACPI: Interpreter enabled
- [ 0.085412] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
- [ 0.085427] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.085429] ACPI: Using IOAPIC for interrupt routing
- [ 0.085452] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
- [ 0.086686] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
- [ 0.086689] PCI: Using MMCONFIG for extended config space
- [ 0.086704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.086796] ACPI: No dock devices found.
- [ 0.093654] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.093855] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
- [ 0.094138] acpi PNP0A08:00: ACPI _OSC control (0x1c) granted
- [ 0.094287] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
- [ 0.094411] PCI host bridge to bus 0000:00
- [ 0.094415] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.094417] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.094419] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.094422] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.094424] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
- [ 0.094426] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
- [ 0.094429] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
- [ 0.094439] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
- [ 0.094462] DMAR: Forcing write-buffer flush capability
- [ 0.094463] DMAR: Disabling IOMMU for graphics on this chipset
- [ 0.094547] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
- [ 0.094592] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.094642] pci 0000:00:01.0: System wakeup disabled by ACPI
- [ 0.094708] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
- [ 0.094725] pci 0000:00:1b.0: reg 0x10: [mem 0xfcffc000-0xfcffffff 64bit]
- [ 0.094793] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.094877] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
- [ 0.094947] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.095001] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.095038] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
- [ 0.095108] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.095162] pci 0000:00:1c.1: System wakeup disabled by ACPI
- [ 0.095203] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
- [ 0.095244] pci 0000:00:1d.0: reg 0x20: [io 0xc480-0xc49f]
- [ 0.095326] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.095362] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
- [ 0.095403] pci 0000:00:1d.1: reg 0x20: [io 0xc800-0xc81f]
- [ 0.095482] pci 0000:00:1d.1: System wakeup disabled by ACPI
- [ 0.095517] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
- [ 0.095558] pci 0000:00:1d.2: reg 0x20: [io 0xc880-0xc89f]
- [ 0.095637] pci 0000:00:1d.2: System wakeup disabled by ACPI
- [ 0.095674] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
- [ 0.095714] pci 0000:00:1d.3: reg 0x20: [io 0xcc00-0xcc1f]
- [ 0.095794] pci 0000:00:1d.3: System wakeup disabled by ACPI
- [ 0.095839] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
- [ 0.095859] pci 0000:00:1d.7: reg 0x10: [mem 0xfcffbc00-0xfcffbfff]
- [ 0.095942] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.095993] pci 0000:00:1d.7: System wakeup disabled by ACPI
- [ 0.096029] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
- [ 0.096122] pci 0000:00:1e.0: System wakeup disabled by ACPI
- [ 0.096163] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
- [ 0.096243] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
- [ 0.096248] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
- [ 0.096252] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
- [ 0.096354] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
- [ 0.096367] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
- [ 0.096377] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
- [ 0.096386] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7]
- [ 0.096396] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb]
- [ 0.096405] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
- [ 0.096499] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
- [ 0.096513] pci 0000:00:1f.2: reg 0x10: [io 0xc400-0xc407]
- [ 0.096521] pci 0000:00:1f.2: reg 0x14: [io 0xc080-0xc083]
- [ 0.096530] pci 0000:00:1f.2: reg 0x18: [io 0xc000-0xc007]
- [ 0.096538] pci 0000:00:1f.2: reg 0x1c: [io 0xbc00-0xbc03]
- [ 0.096546] pci 0000:00:1f.2: reg 0x20: [io 0xb880-0xb88f]
- [ 0.096582] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.096660] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
- [ 0.096712] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
- [ 0.096857] pci 0000:04:00.0: [10de:1040] type 00 class 0x030000
- [ 0.096870] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
- [ 0.096881] pci 0000:04:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
- [ 0.096893] pci 0000:04:00.0: reg 0x1c: [mem 0xe6000000-0xe7ffffff 64bit pref]
- [ 0.096901] pci 0000:04:00.0: reg 0x24: [io 0xec00-0xec7f]
- [ 0.096909] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
- [ 0.096990] pci 0000:04:00.1: [10de:0e08] type 00 class 0x040300
- [ 0.097001] pci 0000:04:00.1: reg 0x10: [mem 0xfebfc000-0xfebfffff]
- [ 0.097125] pci 0000:00:01.0: PCI bridge to [bus 04]
- [ 0.097129] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.097132] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
- [ 0.097137] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bit pref]
- [ 0.097192] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.097201] pci 0000:00:1c.0: bridge window [mem 0xe5f00000-0xe5ffffff 64bit pref]
- [ 0.097274] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.097292] pci 0000:01:00.0: reg 0x10: [io 0xd800-0xd8ff]
- [ 0.097320] pci 0000:01:00.0: reg 0x18: [mem 0xe5eff000-0xe5efffff 64bit pref]
- [ 0.097339] pci 0000:01:00.0: reg 0x20: [mem 0xe5ef8000-0xe5efbfff 64bit pref]
- [ 0.097415] pci 0000:01:00.0: supports D1 D2
- [ 0.097417] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.108025] pci 0000:00:1c.1: PCI bridge to [bus 01]
- [ 0.108033] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
- [ 0.108045] pci 0000:00:1c.1: bridge window [mem 0xe5e00000-0xe5efffff 64bit pref]
- [ 0.108169] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
- [ 0.108184] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.108189] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.108194] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.108204] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- [ 0.108207] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
- [ 0.108209] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
- [ 0.108226] pci_bus 0000:00: on NUMA node 0
- [ 0.108929] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.108994] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.109057] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
- [ 0.109121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.109183] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.109247] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.109311] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.109375] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.109489] ACPI: Enabled 2 GPEs in block 00 to 1F
- [ 0.109496] ACPI: \_SB_.PCI0: notify handler is installed
- [ 0.109536] Found 1 acpi root devices
- [ 0.112022] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.112024] vgaarb: loaded
- [ 0.112026] vgaarb: bridge control possible 0000:04:00.0
- [ 0.112251] SCSI subsystem initialized
- [ 0.112254] ACPI: bus type ATA registered
- [ 0.112273] libata version 3.00 loaded.
- [ 0.112273] ACPI: bus type USB registered
- [ 0.112273] usbcore: registered new interface driver usbfs
- [ 0.112273] usbcore: registered new interface driver hub
- [ 0.112273] usbcore: registered new device driver usb
- [ 0.112273] PCI: Using ACPI for IRQ routing
- [ 0.113410] PCI: pci_cache_line_size set to 64 bytes
- [ 0.113457] e820: reserve RAM buffer [mem 0x00097800-0x0009ffff]
- [ 0.113460] e820: reserve RAM buffer [mem 0x7ff80000-0x7fffffff]
- [ 0.113562] NetLabel: Initializing
- [ 0.113564] NetLabel: domain hash size = 128
- [ 0.113565] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.113576] NetLabel: unlabeled traffic allowed by default
- [ 0.113589] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.113589] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.113589] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.116017] Switched to clocksource hpet
- [ 0.123625] AppArmor: AppArmor Filesystem Enabled
- [ 0.123666] pnp: PnP ACPI init
- [ 0.123686] ACPI: bus type PNP registered
- [ 0.123768] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
- [ 0.123771] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.123775] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.123827] pnp 00:01: [dma 4]
- [ 0.123850] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.123893] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.123921] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.123951] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.124386] pnp 00:05: [dma 3]
- [ 0.124507] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
- [ 0.124635] system 00:06: [io 0x04d0-0x04d1] has been reserved
- [ 0.124639] system 00:06: [io 0x0800-0x087f] could not be reserved
- [ 0.124642] system 00:06: [io 0x0480-0x04bf] has been reserved
- [ 0.124644] system 00:06: [io 0x0900-0x090f] has been reserved
- [ 0.124648] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.124650] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
- [ 0.124654] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.124730] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.124801] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.124873] system 00:09: [mem 0xffc00000-0xffefffff] has been reserved
- [ 0.124877] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.124993] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.124996] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.124999] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.125246] pnp 00:0b: [dma 0 disabled]
- [ 0.125311] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.125427] system 00:0c: [io 0x0280-0x028f] has been reserved
- [ 0.125430] system 00:0c: [io 0x0290-0x029f] has been reserved
- [ 0.125433] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.125496] system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved
- [ 0.125500] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.125698] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.125701] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.125703] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.125706] system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
- [ 0.125709] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.125844] pnp: PnP ACPI: found 15 devices
- [ 0.125846] ACPI: bus type PNP unregistered
- [ 0.125849] PnPBIOS: Disabled by ACPI PNP
- [ 0.162438] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
- [ 0.162443] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 400000
- [ 0.162452] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 400000
- [ 0.162462] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
- [ 0.162465] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
- [ 0.162468] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
- [ 0.162471] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 0.162476] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
- [ 0.162479] pci 0000:00:1c.1: BAR 14: assigned [mem 0x80400000-0x807fffff]
- [ 0.162483] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
- [ 0.162487] pci 0000:04:00.0: BAR 6: assigned [mem 0xfe000000-0xfe07ffff pref]
- [ 0.162490] pci 0000:00:01.0: PCI bridge to [bus 04]
- [ 0.162494] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.162498] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
- [ 0.162501] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bit pref]
- [ 0.162506] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.162509] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
- [ 0.162514] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
- [ 0.162518] pci 0000:00:1c.0: bridge window [mem 0xe5f00000-0xe5ffffff 64bit pref]
- [ 0.162524] pci 0000:00:1c.1: PCI bridge to [bus 01]
- [ 0.162527] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
- [ 0.162532] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x807fffff]
- [ 0.162536] pci 0000:00:1c.1: bridge window [mem 0xe5e00000-0xe5efffff 64bit pref]
- [ 0.162542] pci 0000:00:1e.0: PCI bridge to [bus 03]
- [ 0.162645] pci 0000:00:1c.0: enabling device (0106 -> 0107)
- [ 0.162781] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.162785] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.162788] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.162790] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.162792] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.162795] pci_bus 0000:00: resource 8 [mem 0x80000000-0xefffffff]
- [ 0.162797] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff]
- [ 0.162799] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
- [ 0.162802] pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfebfffff]
- [ 0.162804] pci_bus 0000:04: resource 2 [mem 0xe6000000-0xefffffff 64bit pref]
- [ 0.162806] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
- [ 0.162809] pci_bus 0000:02: resource 1 [mem 0x80000000-0x803fffff]
- [ 0.162811] pci_bus 0000:02: resource 2 [mem 0xe5f00000-0xe5ffffff 64bit pref]
- [ 0.162813] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.162816] pci_bus 0000:01: resource 1 [mem 0x80400000-0x807fffff]
- [ 0.162818] pci_bus 0000:01: resource 2 [mem 0xe5e00000-0xe5efffff 64bit pref]
- [ 0.162820] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
- [ 0.162823] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
- [ 0.162825] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.162827] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.162829] pci_bus 0000:03: resource 8 [mem 0x80000000-0xefffffff]
- [ 0.162831] pci_bus 0000:03: resource 9 [mem 0xf4000000-0xffffffff]
- [ 0.162868] NET: Registered protocol family 2
- [ 0.163035] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.163062] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.163088] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.163114] TCP: reno registered
- [ 0.163117] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.163124] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.163185] NET: Registered protocol family 1
- [ 0.163936] pci 0000:04:00.0: Boot video device
- [ 0.163950] PCI: CLS 32 bytes, default 64
- [ 0.163994] Trying to unpack rootfs image as initramfs...
- [ 0.500637] Freeing initrd memory: 16964K (f5ece000 - f6f5f000)
- [ 0.500856] Scanning for low memory corruption every 60 seconds
- [ 0.501138] Initialise module verification
- [ 0.501185] audit: initializing netlink socket (disabled)
- [ 0.501200] type=2000 audit(1390291571.500:1): initialized
- [ 0.522926] bounce pool size: 64 pages
- [ 0.522943] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.524383] zbud: loaded
- [ 0.524434] VFS: Disk quotas dquot_6.5.2
- [ 0.524488] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.525033] fuse init (API version 7.22)
- [ 0.525122] msgmni has been set to 1718
- [ 0.525576] Key type asymmetric registered
- [ 0.525579] Asymmetric key parser 'x509' registered
- [ 0.525620] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.525655] io scheduler noop registered
- [ 0.525657] io scheduler deadline registered (default)
- [ 0.525685] io scheduler cfq registered
- [ 0.525807] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.525882] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
- [ 0.525963] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
- [ 0.526055] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
- [ 0.526058] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
- [ 0.526060] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
- [ 0.526063] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
- [ 0.526084] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- [ 0.526088] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
- [ 0.526106] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
- [ 0.526108] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 0.526112] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
- [ 0.526127] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.526145] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.526231] intel_idle: does not run on family 6 model 23
- [ 0.526305] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.526310] ACPI: Power Button [PWRB]
- [ 0.526351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.526353] ACPI: Power Button [PWRF]
- [ 0.526473] GHES: HEST is not enabled!
- [ 0.526516] isapnp: Scanning for PnP cards...
- [ 0.526553] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.546990] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.548302] Linux agpgart interface v0.103
- [ 0.549793] brd: module loaded
- [ 0.550510] loop: module loaded
- [ 0.550631] ata_piix 0000:00:1f.1: version 2.13
- [ 0.550758] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 0.552048] scsi0 : ata_piix
- [ 0.552491] scsi1 : ata_piix
- [ 0.552890] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- [ 0.552893] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- [ 0.552976] ata_piix 0000:00:1f.2: MAP [
- [ 0.552978] P0 P2 P1 P3 ]
- [ 0.553010] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 0.553474] scsi2 : ata_piix
- [ 0.553968] scsi3 : ata_piix
- [ 0.554511] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
- [ 0.554514] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
- [ 0.554822] libphy: Fixed MDIO Bus: probed
- [ 0.554922] tun: Universal TUN/TAP device driver, 1.6
- [ 0.554924] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.554988] PPP generic driver version 2.4.2
- [ 0.555031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.555033] ehci-pci: EHCI PCI platform driver
- [ 0.555136] ehci-pci 0000:00:1d.7: setting latency timer to 64
- [ 0.555146] ehci-pci 0000:00:1d.7: EHCI Host Controller
- [ 0.555153] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 0.555166] ehci-pci 0000:00:1d.7: debug port 1
- [ 0.559054] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.559076] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcffbc00
- [ 0.568014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.568053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.568056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.568058] usb usb1: Product: EHCI Host Controller
- [ 0.568060] usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
- [ 0.568062] usb usb1: SerialNumber: 0000:00:1d.7
- [ 0.568173] hub 1-0:1.0: USB hub found
- [ 0.568178] hub 1-0:1.0: 8 ports detected
- [ 0.568342] ehci-platform: EHCI generic platform driver
- [ 0.568352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.568353] ohci-pci: OHCI PCI platform driver
- [ 0.568364] ohci-platform: OHCI generic platform driver
- [ 0.568371] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.568467] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.568471] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.568475] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.568498] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
- [ 0.568528] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.568531] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.568533] usb usb2: Product: UHCI Host Controller
- [ 0.568535] usb usb2: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
- [ 0.568537] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.568629] hub 2-0:1.0: USB hub found
- [ 0.568633] hub 2-0:1.0: 2 ports detected
- [ 0.568776] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.568780] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.568784] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 0.568806] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
- [ 0.568834] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.568837] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.568839] usb usb3: Product: UHCI Host Controller
- [ 0.568841] usb usb3: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
- [ 0.568843] usb usb3: SerialNumber: 0000:00:1d.1
- [ 0.568928] hub 3-0:1.0: USB hub found
- [ 0.568932] hub 3-0:1.0: 2 ports detected
- [ 0.569073] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.569076] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.569082] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 0.569116] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
- [ 0.569143] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.569145] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.569147] usb usb4: Product: UHCI Host Controller
- [ 0.569149] usb usb4: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
- [ 0.569151] usb usb4: SerialNumber: 0000:00:1d.2
- [ 0.569239] hub 4-0:1.0: USB hub found
- [ 0.569242] hub 4-0:1.0: 2 ports detected
- [ 0.569384] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 0.569387] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 0.569391] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 0.569425] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
- [ 0.569454] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.569457] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.569459] usb usb5: Product: UHCI Host Controller
- [ 0.569461] usb usb5: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
- [ 0.569463] usb usb5: SerialNumber: 0000:00:1d.3
- [ 0.569549] hub 5-0:1.0: USB hub found
- [ 0.569554] hub 5-0:1.0: 2 ports detected
- [ 0.569705] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.572430] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.572437] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.572544] mousedev: PS/2 mouse device common for all mice
- [ 0.572664] rtc_cmos 00:02: RTC can wake from S4
- [ 0.572771] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 0.572795] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.572872] device-mapper: uevent: version 1.0.3
- [ 0.572930] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
- [ 0.572951] platform eisa.0: Probing EISA bus 0
- [ 0.572970] platform eisa.0: EISA: Detected 0 cards
- [ 0.572978] cpufreq-nforce2: No nForce2 chipset.
- [ 0.572980] cpuidle: using governor ladder
- [ 0.572982] cpuidle: using governor menu
- [ 0.572993] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.573092] TCP: cubic registered
- [ 0.573196] NET: Registered protocol family 10
- [ 0.573399] NET: Registered protocol family 17
- [ 0.573410] Key type dns_resolver registered
- [ 0.573577] Using IPI No-Shortcut mode
- [ 0.573654] PM: Hibernation image not present or could not be loaded.
- [ 0.573658] Loading module verification certificates
- [ 0.577362] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 20cb30850ee856675c288816dd8cff0153e91a4b'
- [ 0.577375] registered taskstats version 1
- [ 0.585105] Key type trusted registered
- [ 0.601100] Key type encrypted registered
- [ 0.617099] AppArmor: AppArmor sha1 policy hashing enabled
- [ 0.617369] Magic number: 14:457:119
- [ 0.617458] rtc_cmos 00:02: setting system clock to 2014-01-21 08:06:11 UTC (1390291571)
- [ 0.617520] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.617522] EDD information not available.
- [ 0.732132] ata4.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40J, max UDMA/100
- [ 0.732136] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 0.732144] ata4.01: ATAPI: Optiarc DVD RW AD-5280S, 1.01, max UDMA/100
- [ 0.740268] ata3.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
- [ 0.740271] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 0.748290] ata4.00: configured for UDMA/100
- [ 0.748347] ata3.00: configured for UDMA/133
- [ 0.764123] ata4.01: configured for UDMA/100
- [ 0.880015] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 0.880116] isapnp: No Plug & Play device found
- [ 0.880254] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1AG0 PQ: 0 ANSI: 5
- [ 0.880379] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 0.880423] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 0.880462] sd 2:0:0:0: [sda] Write Protect is off
- [ 0.880465] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.880538] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.880550] scsi 3:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
- [ 0.880693] sd 3:0:0:0: Attached scsi generic sg1 type 0
- [ 0.881224] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 0.881502] scsi 3:0:1:0: CD-ROM Optiarc DVD RW AD-5280S 1.01 PQ: 0 ANSI: 5
- [ 0.881559] sd 3:0:0:0: [sdb] Write Protect is off
- [ 0.881565] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.881607] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.883480] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
- [ 0.883485] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.883649] sr 3:0:1:0: Attached scsi CD-ROM sr0
- [ 0.883711] sr 3:0:1:0: Attached scsi generic sg2 type 5
- [ 0.905731] sdb: sdb1 sdb2
- [ 0.906835] sd 3:0:0:0: [sdb] Attached SCSI disk
- [ 0.927082] sda: sda1 sda2 < sda5 sda6 >
- [ 0.927540] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 0.927870] Freeing unused kernel memory: 880K (c1972000 - c1a4e000)
- [ 0.927905] Write protecting the kernel text: 6360k
- [ 0.927985] Write protecting the kernel read-only data: 2700k
- [ 0.927986] NX-protecting the kernel data: 5928k
- [ 0.941802] systemd-udevd[105]: starting version 204
- [ 0.974149] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.974383] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
- [ 0.974578] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf8412000, 00:25:22:e5:64:a1, XID 081000c0 IRQ 43
- [ 0.974582] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 1.013621] usb 1-1: New USB device found, idVendor=2040, idProduct=1605
- [ 1.013626] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
- [ 1.013628] usb 1-1: Product: WinTV HVR-930C
- [ 1.013631] usb 1-1: SerialNumber: 4032611202
- [ 1.124055] usb 1-2: new high-speed USB device number 3 using ehci-pci
- [ 1.257624] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
- [ 1.257631] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.257637] usb 1-2: Product: 802.11n WLAN Adapter
- [ 1.257641] usb 1-2: Manufacturer: Realtek
- [ 1.257645] usb 1-2: SerialNumber: 00e04c000001
- [ 1.349606] PM: Marking nosave pages: [mem 0x00097000-0x000fffff]
- [ 1.349613] PM: Basic memory bitmaps created
- [ 1.395853] PM: Basic memory bitmaps freed
- [ 1.402273] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
- [ 1.402277] EXT4-fs (sdb2): write access will be enabled during recovery
- [ 1.500021] tsc: Refined TSC clocksource calibration: 2602.030 MHz
- [ 1.628025] usb 1-4: new high-speed USB device number 5 using ehci-pci
- [ 1.761751] usb 1-4: New USB device found, idVendor=0930, idProduct=6545
- [ 1.761758] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.761763] usb 1-4: Product: DataTraveler 2.0
- [ 1.761767] usb 1-4: Manufacturer: Kingston
- [ 1.761771] usb 1-4: SerialNumber: 001D0F0CCF5C5B8A0F0F02EC
- [ 1.880511] usb-storage 1-4:1.0: USB Mass Storage device detected
- [ 1.880582] scsi4 : usb-storage 1-4:1.0
- [ 1.880672] usbcore: registered new interface driver usb-storage
- [ 2.112038] usb 3-1: new full-speed USB device number 2 using uhci_hcd
- [ 2.282854] usb 3-1: New USB device found, idVendor=0471, idProduct=0815
- [ 2.282861] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.282866] usb 3-1: Product: eHome Infrared Transceiver
- [ 2.282871] usb 3-1: Manufacturer: Philips
- [ 2.282875] usb 3-1: SerialNumber: PH00OcKX
- [ 2.500104] Switched to clocksource tsc
- [ 2.524024] usb 4-1: new low-speed USB device number 2 using uhci_hcd
- [ 2.701153] usb 4-1: New USB device found, idVendor=0461, idProduct=0010
- [ 2.701159] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.701163] usb 4-1: Product: USB Keyboard
- [ 2.701168] usb 4-1: Manufacturer: NOVATEK
- [ 2.712209] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.756257] usbcore: registered new interface driver usbhid
- [ 2.756262] usbhid: USB HID core driver
- [ 2.761068] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2
- [ 2.761167] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.2-1/input0
- [ 2.771269] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input3
- [ 2.771389] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.2-1/input1
- [ 2.880657] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
- [ 2.881046] sd 4:0:0:0: Attached scsi generic sg3 type 0
- [ 2.882383] sd 4:0:0:0: [sdc] Attached SCSI removable disk
- [ 2.944033] usb 4-2: new low-speed USB device number 3 using uhci_hcd
- [ 3.110150] usb 4-2: New USB device found, idVendor=04fc, idProduct=0003
- [ 3.110157] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 3.110161] usb 4-2: Product: USB Wheel Mouse
- [ 3.129767] input: USB Wheel Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
- [ 3.129890] hid-generic 0003:04FC:0003.0003: input,hidraw2: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:1d.2-2/input0
- [ 3.281738] EXT4-fs (sdb2): recovery complete
- [ 3.288837] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
- [ 13.714165] Adding 2094076k swap on /dev/sda6. Priority:-1 extents:1 across:2094076k FS
- [ 13.929253] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 14.057481] systemd-udevd[271]: starting version 204
- [ 14.193293] lp: driver loaded but no devices found
- [ 14.256276] parport_pc 00:05: reported by Plug and Play ACPI
- [ 14.256527] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
- [ 14.295197] [drm] Initialized drm 1.1.0 20060810
- [ 14.340069] intel_rng: FWH not detected
- [ 14.356333] lp0: using parport0 (interrupt-driven).
- [ 14.364807] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPR2 1 (20130517/utaddress-251)
- [ 14.364815] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 14.370580] leds_ss4200: no LED devices found
- [ 14.371820] wmi: Mapper loaded
- [ 14.432212] nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0x0d9000a1
- [ 14.432217] nouveau [ DEVICE][0000:04:00.0] Chipset: GF119 (NVD9)
- [ 14.432219] nouveau [ DEVICE][0000:04:00.0] Family : NVD0
- [ 14.433024] nouveau [ VBIOS][0000:04:00.0] checking PRAMIN for image...
- [ 14.489481] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
- [ 14.504997] nouveau [ VBIOS][0000:04:00.0] ... appears to be valid
- [ 14.505002] nouveau [ VBIOS][0000:04:00.0] using image from PRAMIN
- [ 14.505101] nouveau [ VBIOS][0000:04:00.0] BIT signature found
- [ 14.505104] nouveau [ VBIOS][0000:04:00.0] version 75.19.1b.00.01
- [ 14.506036] nouveau [ PFB][0000:04:00.0] RAM type: DDR3
- [ 14.506040] nouveau [ PFB][0000:04:00.0] RAM size: 1024 MiB
- [ 14.506042] nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
- [ 14.521676] SKU: Nid=0x1d sku_cfg=0x4004c601
- [ 14.521679] SKU: port_connectivity=0x1
- [ 14.521681] SKU: enable_pcbeep=0x0
- [ 14.521682] SKU: check_sum=0x00000004
- [ 14.521683] SKU: customization=0x000000c6
- [ 14.521685] SKU: external_amp=0x0
- [ 14.521686] SKU: platform_type=0x0
- [ 14.521687] SKU: swap=0x0
- [ 14.521688] SKU: override=0x1
- [ 14.521902] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
- [ 14.521904] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 14.521906] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 14.521907] mono: mono_out=0x0
- [ 14.521908] inputs:
- [ 14.521910] Front Mic=0x19
- [ 14.521912] Rear Mic=0x18
- [ 14.521913] Line=0x1a
- [ 14.521915] realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
- [ 14.521917] realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0662
- [ 14.533811] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
- [ 14.536183] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
- [ 14.536446] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
- [ 14.536755] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
- [ 14.537087] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- [ 14.539921] nouveau [ PTHERM][0000:04:00.0] FAN control: none / external
- [ 14.539931] nouveau [ PTHERM][0000:04:00.0] fan management: disabled
- [ 14.539936] nouveau [ PTHERM][0000:04:00.0] internal sensor: yes
- [ 14.543432] [TTM] Zone kernel: Available graphics memory: 440348 kiB
- [ 14.543435] [TTM] Zone highmem: Available graphics memory: 1031968 kiB
- [ 14.543436] [TTM] Initializing pool allocator
- [ 14.543441] [TTM] Initializing DMA pool allocator
- [ 14.543452] nouveau [ DRM] VRAM: 1024 MiB
- [ 14.543454] nouveau [ DRM] GART: 1048576 MiB
- [ 14.543459] nouveau [ DRM] TMDS table version 2.0
- [ 14.543461] nouveau [ DRM] DCB version 4.0
- [ 14.543463] nouveau [ DRM] DCB outp 00: 02000300 00000000
- [ 14.543466] nouveau [ DRM] DCB outp 01: 01000302 00020030
- [ 14.543469] nouveau [ DRM] DCB outp 02: 02011362 00020010
- [ 14.543471] nouveau [ DRM] DCB outp 03: 04022310 00000000
- [ 14.543473] nouveau [ DRM] DCB conn 00: 00001030
- [ 14.543476] nouveau [ DRM] DCB conn 01: 00002161
- [ 14.543478] nouveau [ DRM] DCB conn 02: 00000200
- [ 14.544615] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 14.544618] [drm] No driver support for vblank timestamp query.
- [ 14.544884] nouveau [ DRM] 2 available performance level(s)
- [ 14.544889] nouveau [ DRM] 1: core 270MHz shader 540MHz memory 405MHz voltage 900mV
- [ 14.544892] nouveau [ DRM] 3: core 810MHz shader 1620MHz memory 600MHz voltage 1110mV
- [ 14.544895] nouveau [ DRM] c: core 270MHz shader 540MHz memory 405MHz voltage 900mV
- [ 14.551608] nouveau [ DRM] MM: using COPY0 for buffer copies
- [ 14.671449] nouveau [ DRM] allocated 1280x768 fb: 0x60000, bo f20e8a00
- [ 14.672042] fbcon: nouveaufb (fb0) is primary device
- [ 14.723760] Console: switching to colour frame buffer device 160x48
- [ 14.724715] nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device
- [ 14.724718] nouveau 0000:04:00.0: registered panic notifier
- [ 14.724723] [drm] Initialized nouveau 1.1.1 20120801 for 0000:04:00.0 on minor 0
- [ 14.724808] hda_intel: Disabling MSI
- [ 14.724817] hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
- [ 14.724865] hda-intel 0000:04:00.1: Disabling 64bit DMA
- [ 14.728815] hda-intel 0000:04:00.1: Enable delay in RIRB handling
- [ 14.768116] type=1400 audit(1390284385.649:2): apparmor="STATUS" operation="profile_load" parent=318 profile="unconfined" name="/sbin/dhclient" pid=340 comm="apparmor_parser"
- [ 14.768125] type=1400 audit(1390284385.649:3): apparmor="STATUS" operation="profile_load" parent=318 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=340 comm="apparmor_parser"
- [ 14.768130] type=1400 audit(1390284385.649:4): apparmor="STATUS" operation="profile_load" parent=318 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=340 comm="apparmor_parser"
- [ 14.768787] type=1400 audit(1390284385.649:5): apparmor="STATUS" operation="profile_replace" parent=318 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=340 comm="apparmor_parser"
- [ 14.768795] type=1400 audit(1390284385.649:6): apparmor="STATUS" operation="profile_replace" parent=318 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=340 comm="apparmor_parser"
- [ 14.769133] type=1400 audit(1390284385.649:7): apparmor="STATUS" operation="profile_replace" parent=318 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=340 comm="apparmor_parser"
- [ 14.772182] type=1400 audit(1390284385.653:8): apparmor="STATUS" operation="profile_load" parent=318 profile="unconfined" name="/usr/sbin/ntpd" pid=356 comm="apparmor_parser"
- [ 14.837045] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
- [ 15.174873] 8192cu: module verification failed: signature and/or required key missing - tainting kernel
- [ 15.175447] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
- [ 15.181746] rtl8192cu driver version=v4.0.2_9000.20130911
- [ 15.181750] build time: Jan 16 2014 16:38:41
- [ 15.181776]
- [ 15.181776] usb_endpoint_descriptor(0):
- [ 15.181778] bLength=7
- [ 15.181780] bDescriptorType=5
- [ 15.181781] bEndpointAddress=81
- [ 15.181782] wMaxPacketSize=200
- [ 15.181784] bInterval=0
- [ 15.181785] RT_usb_endpoint_is_bulk_in = 1
- [ 15.181786]
- [ 15.181786] usb_endpoint_descriptor(1):
- [ 15.181788] bLength=7
- [ 15.181789] bDescriptorType=5
- [ 15.181791] bEndpointAddress=2
- [ 15.181792] wMaxPacketSize=200
- [ 15.181793] bInterval=0
- [ 15.181794] RT_usb_endpoint_is_bulk_out = 2
- [ 15.181796]
- [ 15.181796] usb_endpoint_descriptor(2):
- [ 15.181798] bLength=7
- [ 15.181799] bDescriptorType=5
- [ 15.181800] bEndpointAddress=3
- [ 15.181801] wMaxPacketSize=200
- [ 15.181802] bInterval=0
- [ 15.181804] RT_usb_endpoint_is_bulk_out = 3
- [ 15.181805]
- [ 15.181805] usb_endpoint_descriptor(3):
- [ 15.181807] bLength=7
- [ 15.181808] bDescriptorType=5
- [ 15.181809] bEndpointAddress=84
- [ 15.181811] wMaxPacketSize=40
- [ 15.181812] bInterval=1
- [ 15.181813] RT_usb_endpoint_is_int_in = 4, Interval = 1
- [ 15.181815] nr_endpoint=4, in_num=2, out_num=2
- [ 15.181815]
- [ 15.181817] USB_SPEED_HIGH
- [ 15.181827] CHIP TYPE: RTL8188C_8192C
- [ 15.181838] register rtw_netdev_ops to netdev_ops
- [ 15.182080] Linux video capture interface: v2.00
- [ 15.186934] Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.
- [ 15.186938] RF_Type is 3!!
- [ 15.188552] EEPROM type is E-FUSE
- [ 15.188556] ====> ReadAdapterInfo8192C
- [ 15.192204] Boot from EFUSE, Autoload OK !
- [ 15.223053] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0)
- [ 15.223057] em28xx: Audio interface 0 found (Vendor Class)
- [ 15.223059] em28xx: Video interface 0 found: isoc
- [ 15.223060] em28xx: DVB interface 0 found: isoc
- [ 15.223845] em28xx: chip ID is em2884
- [ 15.260021] Registered IR keymap rc-rc6-mce
- [ 15.260248] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/rc/rc0/input10
- [ 15.260351] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/rc/rc0
- [ 15.267478] IR RC5(x) protocol handler initialized
- [ 15.267576] IR NEC protocol handler initialized
- [ 15.273156] IR RC6 protocol handler initialized
- [ 15.275568] IR JVC protocol handler initialized
- [ 15.287906] IR SANYO protocol handler initialized
- [ 15.288124] IR Sony protocol handler initialized
- [ 15.288513] IR MCE Keyboard/mouse protocol handler initialized
- [ 15.294863] lirc_dev: IR Remote Control driver registered, major 250
- [ 15.295506] em2884 #0: i2c eeprom 0000: 26 00 01 00 02 0c 2a e5 f5 64 01 60 09 e5 f5 64
- [ 15.295518] em2884 #0: i2c eeprom 0010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03
- [ 15.295528] em2884 #0: i2c eeprom 0020: 02 0b b8 e5 f6 b4 93 03 02 0a 74 c2 c6 22 c2 c6
- [ 15.295537] em2884 #0: i2c eeprom 0030: 22 00 60 00 d2 c6 7b 00 7a 00 79 23 22 90 05 9e
- [ 15.295547] em2884 #0: i2c eeprom 0040: 75 f0 25 e5 35 02 09 1d 25 e0 24 c6 f5 82 e4 34
- [ 15.295556] em2884 #0: i2c eeprom 0050: 06 f5 83 e4 93 22 e4 93 f5 36 e5 36 22 00 00 00
- [ 15.295566] em2884 #0: i2c eeprom 0060: 00 00 02 01 1a eb 67 95 40 20 05 16 70 13 6a 03
- [ 15.295575] em2884 #0: i2c eeprom 0070: 82 1e 6a 18 00 00 24 57 6e 07 29 00 00 00 00 00
- [ 15.295585] em2884 #0: i2c eeprom 0080: 00 00 00 00 4e 00 13 00 f0 10 02 82 82 00 00 00
- [ 15.295594] em2884 #0: i2c eeprom 0090: 5b 81 00 00 00 00 20 40 20 78 02 20 10 01 01 01
- [ 15.295603] em2884 #0: i2c eeprom 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 15.295613] em2884 #0: i2c eeprom 00b0: c6 c5 00 00 84 00 00 a1 00 00 00 00 00 c2 00 00
- [ 15.295622] em2884 #0: i2c eeprom 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 03
- [ 15.295631] em2884 #0: i2c eeprom 00d0: 34 00 30 00 33 00 32 00 36 00 31 00 31 00 32 00
- [ 15.295641] em2884 #0: i2c eeprom 00e0: 30 00 32 00 00 00 1e 03 57 00 69 00 6e 00 54 00
- [ 15.295650] em2884 #0: i2c eeprom 00f0: 56 00 20 00 48 00 56 00 52 00 2d 00 39 00 33 00
- [ 15.295660] em2884 #0: i2c eeprom 0100: ... (skipped)
- [ 15.295663] em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x23f006aa
- [ 15.295665] em2884 #0: EEPROM info:
- [ 15.295666] em2884 #0: microcode start address = 0x0004, boot configuration = 0x01
- [ 15.298868] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input11
- [ 15.299486] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
- [ 15.299490] IR LIRC bridge handler initialized
- [ 15.307629] em2884 #0: I2S audio, 3 sample rates
- [ 15.307634] em2884 #0: 500mA max power
- [ 15.307636] em2884 #0: Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000
- [ 15.307762] em2884 #0: Identified as Hauppauge WinTV HVR 930C (card=81)
- [ 15.317070] tveeprom 13-0050: Hauppauge model 16009, rev B1F0, serial# 6079362
- [ 15.317075] tveeprom 13-0050: MAC address is 00:0d:fe:5c:c3:82
- [ 15.317077] tveeprom 13-0050: tuner model is Xceive XC5000 (idx 150, type 76)
- [ 15.317079] tveeprom 13-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
- [ 15.317081] tveeprom 13-0050: audio processor is unknown (idx 45)
- [ 15.317083] tveeprom 13-0050: decoder processor is unknown (idx 44)
- [ 15.317085] tveeprom 13-0050: has no radio, has IR receiver, has no IR transmitter
- [ 15.317121] em2884 #0: Config register raw data: 0x22
- [ 15.317123] em2884 #0: I2S Audio (3 sample rates)
- [ 15.317124] em2884 #0: No AC97 audio processor
- [ 15.344030] em2884 #0: v4l2 driver version 0.2.0
- [ 15.377797] em2884 #0: V4L2 video device registered as video0
- [ 15.377803] em2884 #0: analog set to isoc mode.
- [ 15.377804] em2884 #0: dvb set to isoc mode.
- [ 15.378235] usbcore: registered new interface driver em28xx
- [ 15.390630] em28xx-audio.c: probing for em28xx Audio Vendor Class
- [ 15.390634] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
- [ 15.390635] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
- [ 15.392802] Em28xx: Initialized (Em28xx Audio Extension) extension
- [ 15.513676] mceusb 3-1:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
- [ 15.513681] mceusb 3-1:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1 active)
- [ 15.513737] usbcore: registered new interface driver mceusb
- [ 15.536749] EEPROMVID = 0x0bda
- [ 15.536752] EEPROMPID = 0x8176
- [ 15.536754] EEPROMCustomerID : 0x00
- [ 15.536755] EEPROMSubCustomerID: 0x00
- [ 15.536756] RT_CustomerID: 0x00
- [ 15.536759] _ReadMACAddress MAC Address from EFUSE = 00:13:ef:d0:28:c2
- [ 15.536761] EEPROMRegulatory = 0x0
- [ 15.536763] _ReadBoardType(0)
- [ 15.536765] BT Coexistance = disable
- [ 15.536767] mlmepriv.ChannelPlan = 0x02
- [ 15.536769] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
- [ 15.536770] ### PS params=> power_mgnt(1),usbss_enable(0) ###
- [ 15.536772] ### AntDivCfg(0)
- [ 15.536773] readAdapterInfo_8192CU(): REPLACEMENT = 1
- [ 15.536775] <==== ReadAdapterInfo8192C in 348 ms
- [ 15.537068] rtw_macaddr_cfg MAC Address = 00:13:ef:d0:28:c2
- [ 15.537072] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
- [ 15.541654] _rtw_drv_register_netdev, MAC Address (if1) = 00:13:ef:d0:28:c2
- [ 15.544326] usbcore: registered new interface driver rtl8192cu
- [ 15.600427] ppdev: user-space parallel port driver
- [ 15.617811] gpio_ich: GPIO from 206 to 255 on gpio_ich
- [ 15.668869] init: failsafe main process (491) killed by TERM signal
- [ 15.671999] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
- [ 15.716422] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 15.781573] kvm: disabled by bios
- [ 15.900156] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input12
- [ 15.900422] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input13
- [ 15.930548] Bluetooth: Core ver 2.16
- [ 15.931364] NET: Registered protocol family 31
- [ 15.931368] Bluetooth: HCI device and connection manager initialized
- [ 15.931378] Bluetooth: HCI socket layer initialized
- [ 15.931381] Bluetooth: L2CAP socket layer initialized
- [ 15.931391] Bluetooth: SCO socket layer initialized
- [ 15.957514] Bluetooth: RFCOMM TTY layer initialized
- [ 15.957528] Bluetooth: RFCOMM socket layer initialized
- [ 15.957530] Bluetooth: RFCOMM ver 1.11
- [ 15.982760] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 15.982764] Bluetooth: BNEP filters: protocol multicast
- [ 15.982777] Bluetooth: BNEP socket layer initialized
- [ 16.767493] init: avahi-cups-reload main process (695) terminated with status 1
- [ 16.770622] drxk: status = 0x439130d9
- [ 16.770627] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz
- [ 16.953151] type=1400 audit(1390284387.833:9): apparmor="STATUS" operation="profile_load" parent=705 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=712 comm="apparmor_parser"
- [ 16.953161] type=1400 audit(1390284387.833:10): apparmor="STATUS" operation="profile_load" parent=705 profile="unconfined" name="/usr/sbin/cupsd" pid=712 comm="apparmor_parser"
- [ 16.953896] type=1400 audit(1390284387.833:11): apparmor="STATUS" operation="profile_replace" parent=705 profile="unconfined" name="/usr/sbin/cupsd" pid=712 comm="apparmor_parser"
- [ 18.018127] drxk: DRXK driver version 0.9.4300
- [ 18.033876] drxk: frontend initialized.
- [ 18.040030] xc5000 13-0061: creating new instance
- [ 18.040753] xc5000: Successfully identified at address 0x61
- [ 18.040756] xc5000: Firmware has not been loaded previously
- [ 18.040760] DVB: registering new adapter (em2884 #0)
- [ 18.040766] usb 1-1: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
- [ 18.041260] em2884 #0: Successfully loaded em28xx-dvb
- [ 18.041268] Em28xx: Initialized (Em28xx dvb Extension) extension
- [ 18.080021] Registered IR keymap rc-hauppauge
- [ 18.080229] input: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc1/input14
- [ 18.080316] rc1: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc1
- [ 18.081874] Em28xx: Initialized (Em28xx Input Extension) extension
- [ 18.487353] init: smbd main process (461) killed by HUP signal
- [ 18.487392] init: smbd main process ended, respawning
- [ 19.021299] r8169 0000:01:00.0 eth0: link down
- [ 19.021338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 19.021719] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 19.048254] cfg80211: Calling CRDA to update world regulatory domain
- [ 19.049113] rtw_wx_set_scan: bDriverStopped=1, bup=0, hw_init_completed=0
- [ 19.049763] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 19.049854] rtw_wx_set_mode: bDriverStopped=1, bup=0, hw_init_completed=0
- [ 19.109140] cfg80211: World regulatory domain updated:
- [ 19.109144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 19.109147] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 19.109149] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 19.109151] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 19.109152] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 19.109154] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 19.772051] audit_printk_skb: 78 callbacks suppressed
- [ 19.772055] type=1400 audit(1390284390.653:38): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="sanitized_helper" pid=872 comm="apparmor_parser"
- [ 19.772062] type=1400 audit(1390284390.653:39): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=872 comm="apparmor_parser"
- [ 19.776235] type=1400 audit(1390284390.657:40): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="sanitized_helper" pid=872 comm="apparmor_parser"
- [ 19.780886] type=1400 audit(1390284390.661:41): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="sanitized_helper" pid=872 comm="apparmor_parser"
- [ 19.780896] type=1400 audit(1390284390.661:42): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=872 comm="apparmor_parser"
- [ 19.790156] type=1400 audit(1390284390.669:43): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="sanitized_helper" pid=872 comm="apparmor_parser"
- [ 19.791937] type=1400 audit(1390284390.669:44): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=872 comm="apparmor_parser"
- [ 19.820040] type=1400 audit(1390284390.701:45): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="sanitized_helper" pid=872 comm="apparmor_parser"
- [ 19.822478] type=1400 audit(1390284390.701:46): apparmor="STATUS" operation="profile_replace" parent=860 profile="unconfined" name="sanitized_helper" pid=872 comm="apparmor_parser"
- [ 20.125298] zram: module is from the staging directory, the quality is unknown, you have been warned.
- [ 20.140126] zram: Created 2 device(s) ...
- [ 20.171660] Adding 515980k swap on /dev/zram0. Priority:5 extents:1 across:515980k SSFS
- [ 20.182398] Adding 515980k swap on /dev/zram1. Priority:5 extents:1 across:515980k SSFS
- [ 22.559316] r8169 0000:01:00.0 eth0: link up
- [ 22.559330] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 45.455772] PM: Syncing filesystems ... done.
- [ 45.909386] PM: Preparing system for mem sleep
- [ 46.216293] Freezing user space processes ... (elapsed 0.007 seconds) done.
- [ 46.223793] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 46.224945] PM: Entering mem sleep
- [ 46.224987] Suspending console(s) (use no_console_suspend to debug)
- [ 46.225385] mceusb 3-1:1.0: suspend
- [ 46.225409] ==> rtw_suspend (kworker/u8:4:56)
- [ 46.225410] padapter->bup=0 bDriverStopped=1 bSurpriseRemoved = 0
- [ 46.225411] <=== rtw_suspend return 0.............. in 0ms
- [ 46.225424] em2884 #0: disconnecting em2884 #0 video
- [ 46.225460] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
- [ 46.225639] sd 3:0:0:0: [sdb] Stopping disk
- [ 46.225904] xc5000 13-0061: destroying instance
- [ 46.225938] sd 2:0:0:0: [sda] Synchronizing SCSI cache
- [ 46.228152] sd 2:0:0:0: [sda] Stopping disk
- [ 46.228661] serial 00:0b: disabled
- [ 46.228667] serial 00:0b: System wakeup disabled by ACPI
- [ 46.228847] parport_pc 00:05: disabled
- [ 46.228915] nouveau [ DRM] suspending fbcon...
- [ 46.228925] nouveau [ DRM] suspending display...
- [ 46.228946] nouveau [ DRM] unpinning framebuffer(s)...
- [ 46.228994] nouveau [ DRM] evicting buffers...
- [ 46.268146] nouveau [ DRM] waiting for kernel channels to go idle...
- [ 46.268184] nouveau [ DRM] suspending client object trees...
- [ 46.268944] nouveau [ DRM] suspending kernel object tree...
- [ 47.872151] em2884 #0: V4L2 device video0 deregistered
- [ 47.888193] PM: suspend of devices complete after 1662.928 msecs
- [ 47.888507] PM: late suspend of devices complete after 0.311 msecs
- [ 47.904182] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
- [ 47.920083] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
- [ 47.920139] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
- [ 47.920194] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
- [ 47.920235] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
- [ 47.920339] PM: noirq suspend of devices complete after 31.830 msecs
- [ 47.920473] ACPI: Preparing to enter system sleep state S3
- [ 48.320465] PM: Saving platform NVS memory
- [ 48.320758] Disabling non-boot CPUs ...
- [ 48.424014] smpboot: CPU 1 is now offline
- [ 48.424241] ACPI: Low-level resume complete
- [ 48.424241] PM: Restoring platform NVS memory
- [ 48.424241] Enabling non-boot CPUs ...
- [ 48.424241] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 48.322072] Initializing CPU#1
- [ 48.437749] CPU1 is up
- [ 48.438665] ACPI: Waking up from system sleep state S3
- [ 48.452240] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
- [ 48.452277] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
- [ 48.452312] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
- [ 48.452347] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
- [ 48.468068] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
- [ 48.532277] PM: noirq resume of devices complete after 93.277 msecs
- [ 48.532432] PM: early resume of devices complete after 0.126 msecs
- [ 48.532564] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
- [ 48.532658] pci 0000:00:1e.0: setting latency timer to 64
- [ 48.532694] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 48.532715] usb usb2: root hub lost power or was reset
- [ 48.532793] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 48.532812] usb usb3: root hub lost power or was reset
- [ 48.532883] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 48.532903] usb usb4: root hub lost power or was reset
- [ 48.532974] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 48.532993] usb usb5: root hub lost power or was reset
- [ 48.533065] ehci-pci 0000:00:1d.7: setting latency timer to 64
- [ 48.533157] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 48.533226] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 48.533319] nouveau [ DRM] re-enabling device...
- [ 48.533329] nouveau [ DRM] resuming kernel object tree...
- [ 48.533335] nouveau [ VBIOS][0000:04:00.0] running init tables
- [ 48.590653] parport_pc 00:05: activated
- [ 48.591523] serial 00:0b: activated
- [ 48.643245] ==> rtw_resume_process (kworker/u8:64:1993)
- [ 48.643248] bkeepfwalive(0)
- [ 48.643249] +871x_drv - drv_open, bup=0
- [ 48.647383] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B
- [ 48.647384] FirmwareDownload92C accquire FW from embedded image
- [ 48.647385] fw_ver=v88, fw_subver=2, sig=0x88c0
- [ 48.672376] fw download ok!
- [ 48.672377] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 48.756047] usb 1-4: reset high-speed USB device number 5 using ehci-pci
- [ 48.760253] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 48.760255] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 48.760305] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out
- [ 48.760307] ata4.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
- [ 48.760309] ata4.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 48.761065] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [ 48.761068] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 48.768134] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 48.768136] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 48.768349] ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [ 48.768351] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 48.784405] ata3.00: configured for UDMA/133
- [ 48.784450] sd 2:0:0:0: [sda] Starting disk
- [ 48.792143] ata4.00: configured for UDMA/100
- [ 48.808176] ata4.01: configured for UDMA/100
- [ 48.809294] nouveau [ DRM] resuming client object trees...
- [ 48.809910] nouveau [ DRM] resuming display...
- [ 48.813695] sd 3:0:0:0: [sdb] Starting disk
- [ 49.000033] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
- [ 49.074698] IQK:Start!!!
- [ 49.085579] Path A IQK Success!!
- [ 49.093207] Path A IQK Success!!
- [ 49.097835] IQK: final_candidate is 0
- [ 49.097839] IQK: RegE94=104 RegE9C=d RegEA4=fe RegEAC=1 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 49.097839] Path A IQ Calibration Success !
- [ 49.152936] mceusb 3-1:1.0: resume
- [ 49.208263] pdmpriv->TxPowerTrackControl = 1
- [ 49.212890] rtl8192cu_hal_init in 572ms
- [ 49.225398] MAC Address = 00:13:ef:d0:28:c2
- [ 49.225468] Unable to create /proc entry in this kernel version
- [ 49.225473] -871x_drv - drv_open, bup=1
- [ 49.225481] <=== rtw_resume_process return 0.............. in 584ms
- [ 49.396026] usb 4-1: reset low-speed USB device number 2 using uhci_hcd
- [ 49.944054] usb 4-2: reset low-speed USB device number 3 using uhci_hcd
- [ 50.263687] PM: resume of devices complete after 1731.250 msecs
- [ 50.264118] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0)
- [ 50.264120] em28xx: Audio interface 0 found (Vendor Class)
- [ 50.264121] em28xx: Video interface 0 found: isoc
- [ 50.264123] em28xx: DVB interface 0 found: isoc
- [ 50.264276] em28xx: chip ID is em2884
- [ 50.327317] em2884 #0: i2c eeprom 0000: 26 00 01 00 02 0c 2a e5 f5 64 01 60 09 e5 f5 64
- [ 50.327329] em2884 #0: i2c eeprom 0010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03
- [ 50.327341] em2884 #0: i2c eeprom 0020: 02 0b b8 e5 f6 b4 93 03 02 0a 74 c2 c6 22 c2 c6
- [ 50.327353] em2884 #0: i2c eeprom 0030: 22 00 60 00 d2 c6 7b 00 7a 00 79 23 22 90 05 9e
- [ 50.327364] em2884 #0: i2c eeprom 0040: 75 f0 25 e5 35 02 09 1d 25 e0 24 c6 f5 82 e4 34
- [ 50.327377] em2884 #0: i2c eeprom 0050: 06 f5 83 e4 93 22 e4 93 f5 36 e5 36 22 00 00 00
- [ 50.327383] em2884 #0: i2c eeprom 0060: 00 00 02 01 1a eb 67 95 40 20 05 16 70 13 6a 03
- [ 50.327388] em2884 #0: i2c eeprom 0070: 82 1e 6a 18 00 00 24 57 6e 07 29 00 00 00 00 00
- [ 50.327394] em2884 #0: i2c eeprom 0080: 00 00 00 00 4e 00 13 00 f0 10 02 82 82 00 00 00
- [ 50.327400] em2884 #0: i2c eeprom 0090: 5b 81 00 00 00 00 20 40 20 78 02 20 10 01 01 01
- [ 50.327406] em2884 #0: i2c eeprom 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 50.327412] em2884 #0: i2c eeprom 00b0: c6 c5 00 00 84 00 00 a1 00 00 00 00 00 c2 00 00
- [ 50.327417] em2884 #0: i2c eeprom 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 03
- [ 50.327423] em2884 #0: i2c eeprom 00d0: 34 00 30 00 33 00 32 00 36 00 31 00 31 00 32 00
- [ 50.327429] em2884 #0: i2c eeprom 00e0: 30 00 32 00 00 00 1e 03 57 00 69 00 6e 00 54 00
- [ 50.327435] em2884 #0: i2c eeprom 00f0: 56 00 20 00 48 00 56 00 52 00 2d 00 39 00 33 00
- [ 50.327436] em2884 #0: i2c eeprom 0100: ... (skipped)
- [ 50.327438] em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x23f006aa
- [ 50.327438] em2884 #0: EEPROM info:
- [ 50.327439] em2884 #0: microcode start address = 0x0004, boot configuration = 0x01
- [ 50.334682] em2884 #0: I2S audio, 3 sample rates
- [ 50.334684] em2884 #0: 500mA max power
- [ 50.334686] em2884 #0: Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000
- [ 50.334737] em2884 #0: Identified as Hauppauge WinTV HVR 930C (card=81)
- [ 50.334745] tveeprom 13-0050: Hauppauge model 16009, rev B1F0, serial# 6079362
- [ 50.334747] tveeprom 13-0050: MAC address is 00:0d:fe:5c:c3:82
- [ 50.334750] tveeprom 13-0050: tuner model is Xceive XC5000 (idx 150, type 76)
- [ 50.334753] tveeprom 13-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
- [ 50.334755] tveeprom 13-0050: audio processor is unknown (idx 45)
- [ 50.334757] tveeprom 13-0050: decoder processor is unknown (idx 44)
- [ 50.334759] tveeprom 13-0050: has no radio, has IR receiver, has no IR transmitter
- [ 50.334809] em2884 #0: Config register raw data: 0x22
- [ 50.334811] em2884 #0: I2S Audio (3 sample rates)
- [ 50.334812] em2884 #0: No AC97 audio processor
- [ 50.360019] em2884 #0: v4l2 driver version 0.2.0
- [ 50.391171] em2884 #0: V4L2 video device registered as video0
- [ 50.391172] em2884 #0: analog set to isoc mode.
- [ 50.391173] em2884 #0: dvb set to isoc mode.
- [ 50.391602] em28xx-audio.c: probing for em28xx Audio Vendor Class
- [ 50.391603] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
- [ 50.391604] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
- [ 50.392179] PM: Finishing wakeup.
- [ 50.392181] Restarting tasks ... done.
- [ 50.785342] r8169 0000:01:00.0 eth0: link down
- [ 50.785387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 50.786502] set_mode = IW_MODE_INFRA
- [ 50.786552] r8169 0000:01:00.0 eth0: link down
- [ 50.787179] hw_var_set_opmode()-4234 mode = 2
- [ 51.649691] drxk: status = 0x439130d9
- [ 51.649696] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz
- [ 52.902174] drxk: DRXK driver version 0.9.4300
- [ 52.916555] drxk: frontend initialized.
- [ 52.916573] xc5000 13-0061: creating new instance
- [ 52.917178] xc5000: Successfully identified at address 0x61
- [ 52.917181] xc5000: Firmware has not been loaded previously
- [ 52.917186] DVB: registering new adapter (em2884 #0)
- [ 52.917194] usb 1-1: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
- [ 52.920621] em2884 #0: Successfully loaded em28xx-dvb
- [ 52.923936] Registered IR keymap rc-hauppauge
- [ 52.924112] input: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc2/input15
- [ 52.924187] rc2: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc2
- [ 52.958847] r8169 0000:01:00.0 eth0: link up
- [ 52.958861] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 53.238713] ==>rtw_ps_processor .fw_state(8)
- [ 53.238720] ==>ips_enter cnts:1
- [ 53.238723] ===> rtw_ips_pwr_down...................
- [ 53.238958] ====> rtw_ips_dev_unload...
- [ 53.262270] usb_read_port_cancel
- [ 53.262465] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 53.262713] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 53.262963] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 53.263213] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 53.263222] usb_write_port_cancel
- [ 53.263238] ==> rtl8192cu_hal_deinit
- [ 53.263241] bkeepfwalive(0)
- [ 53.263244] card disble without HWSM...........
- [ 53.268224] <=== rtw_ips_pwr_down..................... in 32ms
- [ 712.669709] perf samples too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
- [ 742.409281] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
- [ 751.756918] PM: Syncing filesystems ... done.
- [ 751.970428] PM: Preparing system for mem sleep
- [ 752.249370] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 752.250910] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 752.252098] PM: Entering mem sleep
- [ 752.252135] Suspending console(s) (use no_console_suspend to debug)
- [ 752.252573] mceusb 3-1:1.0: suspend
- [ 752.252635] ==> rtw_suspend (kworker/u8:1:4059)
- [ 752.252649] rtw_cmd_thread(wlan0) stop_req:1, break
- [ 752.252722] em2884 #0: disconnecting em2884 #0 video
- [ 752.253059] xc5000 13-0061: destroying instance
- [ 752.253121] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
- [ 752.253210] sd 2:0:0:0: [sda] Synchronizing SCSI cache
- [ 752.255382] sd 2:0:0:0: [sda] Stopping disk
- [ 752.255890] serial 00:0b: disabled
- [ 752.255896] serial 00:0b: System wakeup disabled by ACPI
- [ 752.256129] parport_pc 00:05: disabled
- [ 752.256419] nouveau [ DRM] suspending fbcon...
- [ 752.256426] nouveau [ DRM] suspending display...
- [ 752.256438] nouveau [ DRM] unpinning framebuffer(s)...
- [ 752.256496] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
- [ 752.256500] nouveau [ DRM] evicting buffers...
- [ 752.262133] ===> rtw_dev_unload
- [ 752.262135] usb_read_port_cancel
- [ 752.262137] usb_write_port_cancel
- [ 752.262160] ==> rtl8192cu_hal_deinit
- [ 752.262160] bkeepfwalive(0)
- [ 752.262161] card disble HWSM...........
- [ 752.265610] <=== rtw_dev_unload
- [ 752.265612] <=== rtw_suspend return 0.............. in 12ms
- [ 752.310363] sd 3:0:0:0: [sdb] Stopping disk
- [ 752.343660] nouveau [ DRM] waiting for kernel channels to go idle...
- [ 752.343699] nouveau [ DRM] suspending client object trees...
- [ 752.344469] nouveau [ DRM] suspending kernel object tree...
- [ 752.512105] em2884 #0: V4L2 device video0 deregistered
- [ 753.996086] PM: suspend of devices complete after 1743.669 msecs
- [ 753.996442] PM: late suspend of devices complete after 0.352 msecs
- [ 754.012169] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
- [ 754.028083] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
- [ 754.028140] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
- [ 754.028195] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
- [ 754.028235] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
- [ 754.028338] PM: noirq suspend of devices complete after 31.894 msecs
- [ 754.028489] ACPI: Preparing to enter system sleep state S3
- [ 754.428356] PM: Saving platform NVS memory
- [ 754.428647] Disabling non-boot CPUs ...
- [ 754.532015] smpboot: CPU 1 is now offline
- [ 754.532228] ACPI: Low-level resume complete
- [ 754.532228] PM: Restoring platform NVS memory
- [ 754.532228] Enabling non-boot CPUs ...
- [ 754.532228] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 754.429922] Initializing CPU#1
- [ 754.548025] CPU1 is up
- [ 754.549069] ACPI: Waking up from system sleep state S3
- [ 754.564234] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
- [ 754.564270] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
- [ 754.564305] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
- [ 754.564340] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
- [ 754.580059] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
- [ 754.644272] PM: noirq resume of devices complete after 94.861 msecs
- [ 754.644427] PM: early resume of devices complete after 0.127 msecs
- [ 754.644564] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
- [ 754.644652] pci 0000:00:1e.0: setting latency timer to 64
- [ 754.644734] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 754.644757] usb usb2: root hub lost power or was reset
- [ 754.644833] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 754.644853] usb usb3: root hub lost power or was reset
- [ 754.644927] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 754.644947] usb usb4: root hub lost power or was reset
- [ 754.645022] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 754.645043] usb usb5: root hub lost power or was reset
- [ 754.645117] ehci-pci 0000:00:1d.7: setting latency timer to 64
- [ 754.645244] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 754.645339] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 754.645388] nouveau [ DRM] re-enabling device...
- [ 754.645398] nouveau [ DRM] resuming kernel object tree...
- [ 754.645404] nouveau [ VBIOS][0000:04:00.0] running init tables
- [ 754.700616] parport_pc 00:05: activated
- [ 754.702748] serial 00:0b: activated
- [ 754.731236] ==> rtw_resume_process (kworker/u8:62:4120)
- [ 754.731239] bkeepfwalive(0)
- [ 754.731240] +871x_drv - drv_open, bup=0
- [ 754.735445] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B
- [ 754.735446] FirmwareDownload92C accquire FW from embedded image
- [ 754.735447] fw_ver=v88, fw_subver=2, sig=0x88c0
- [ 754.760442] fw download ok!
- [ 754.760443] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 754.776267] r8169 0000:01:00.0 eth0: link down
- [ 754.870863] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 754.870865] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 754.872413] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [ 754.872415] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 754.876137] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out
- [ 754.876139] ata4.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
- [ 754.876141] ata4.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 754.884146] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 754.884148] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 754.884360] ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
- [ 754.884362] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 754.892921] ata3.00: configured for UDMA/133
- [ 754.892992] sd 2:0:0:0: [sda] Starting disk
- [ 754.908164] ata4.00: configured for UDMA/100
- [ 754.924145] ata4.01: configured for UDMA/100
- [ 754.928804] nouveau [ DRM] resuming client object trees...
- [ 754.929384] nouveau [ DRM] resuming display...
- [ 754.930431] sd 3:0:0:0: [sdb] Starting disk
- [ 754.964037] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
- [ 755.120053] mceusb 3-1:1.0: resume
- [ 755.182687] IQK:Start!!!
- [ 755.193562] Path A IQK Success!!
- [ 755.201187] Path A IQK Success!!
- [ 755.205813] IQK: final_candidate is 0
- [ 755.205817] IQK: RegE94=103 RegE9C=d RegEA4=fd RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 755.205817] Path A IQ Calibration Success !
- [ 755.316185] pdmpriv->TxPowerTrackControl = 1
- [ 755.320811] rtl8192cu_hal_init in 592ms
- [ 755.333312] MAC Address = 00:13:ef:d0:28:c2
- [ 755.333378] Unable to create /proc entry in this kernel version
- [ 755.333386] -871x_drv - drv_open, bup=1
- [ 755.333392] <=== rtw_resume_process return 0.............. in 604ms
- [ 755.364029] usb 4-1: reset low-speed USB device number 2 using uhci_hcd
- [ 755.912028] usb 4-2: reset low-speed USB device number 3 using uhci_hcd
- [ 756.231262] PM: resume of devices complete after 1586.830 msecs
- [ 756.231357] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0)
- [ 756.231358] em28xx: Audio interface 0 found (Vendor Class)
- [ 756.231359] em28xx: Video interface 0 found: isoc
- [ 756.231359] em28xx: DVB interface 0 found: isoc
- [ 756.231424] em28xx: chip ID is em2884
- [ 756.291306] em2884 #0: i2c eeprom 0000: 26 00 01 00 02 0c 2a e5 f5 64 01 60 09 e5 f5 64
- [ 756.291318] em2884 #0: i2c eeprom 0010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03
- [ 756.291330] em2884 #0: i2c eeprom 0020: 02 0b b8 e5 f6 b4 93 03 02 0a 74 c2 c6 22 c2 c6
- [ 756.291341] em2884 #0: i2c eeprom 0030: 22 00 60 00 d2 c6 7b 00 7a 00 79 23 22 90 05 9e
- [ 756.291353] em2884 #0: i2c eeprom 0040: 75 f0 25 e5 35 02 09 1d 25 e0 24 c6 f5 82 e4 34
- [ 756.291366] em2884 #0: i2c eeprom 0050: 06 f5 83 e4 93 22 e4 93 f5 36 e5 36 22 00 00 00
- [ 756.291372] em2884 #0: i2c eeprom 0060: 00 00 02 01 1a eb 67 95 40 20 05 16 70 13 6a 03
- [ 756.291377] em2884 #0: i2c eeprom 0070: 82 1e 6a 18 00 00 24 57 6e 07 29 00 00 00 00 00
- [ 756.291383] em2884 #0: i2c eeprom 0080: 00 00 00 00 4e 00 13 00 f0 10 02 82 82 00 00 00
- [ 756.291389] em2884 #0: i2c eeprom 0090: 5b 81 00 00 00 00 20 40 20 78 02 20 10 01 01 01
- [ 756.291395] em2884 #0: i2c eeprom 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 756.291400] em2884 #0: i2c eeprom 00b0: c6 c5 00 00 84 00 00 a1 00 00 00 00 00 c2 00 00
- [ 756.291406] em2884 #0: i2c eeprom 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 03
- [ 756.291412] em2884 #0: i2c eeprom 00d0: 34 00 30 00 33 00 32 00 36 00 31 00 31 00 32 00
- [ 756.291418] em2884 #0: i2c eeprom 00e0: 30 00 32 00 00 00 1e 03 57 00 69 00 6e 00 54 00
- [ 756.291424] em2884 #0: i2c eeprom 00f0: 56 00 20 00 48 00 56 00 52 00 2d 00 39 00 33 00
- [ 756.291425] em2884 #0: i2c eeprom 0100: ... (skipped)
- [ 756.291427] em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x23f006aa
- [ 756.291427] em2884 #0: EEPROM info:
- [ 756.291428] em2884 #0: microcode start address = 0x0004, boot configuration = 0x01
- [ 756.298668] em2884 #0: I2S audio, 3 sample rates
- [ 756.298669] em2884 #0: 500mA max power
- [ 756.298672] em2884 #0: Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000
- [ 756.298725] em2884 #0: Identified as Hauppauge WinTV HVR 930C (card=81)
- [ 756.298733] tveeprom 13-0050: Hauppauge model 16009, rev B1F0, serial# 6079362
- [ 756.298735] tveeprom 13-0050: MAC address is 00:0d:fe:5c:c3:82
- [ 756.298738] tveeprom 13-0050: tuner model is Xceive XC5000 (idx 150, type 76)
- [ 756.298741] tveeprom 13-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
- [ 756.298742] tveeprom 13-0050: audio processor is unknown (idx 45)
- [ 756.298744] tveeprom 13-0050: decoder processor is unknown (idx 44)
- [ 756.298747] tveeprom 13-0050: has no radio, has IR receiver, has no IR transmitter
- [ 756.298795] em2884 #0: Config register raw data: 0x22
- [ 756.298796] em2884 #0: I2S Audio (3 sample rates)
- [ 756.298797] em2884 #0: No AC97 audio processor
- [ 756.324014] em2884 #0: v4l2 driver version 0.2.0
- [ 756.355266] em2884 #0: V4L2 video device registered as video0
- [ 756.355268] em2884 #0: analog set to isoc mode.
- [ 756.355269] em2884 #0: dvb set to isoc mode.
- [ 756.356058] PM: Finishing wakeup.
- [ 756.361250] em28xx-audio.c: probing for em28xx Audio Vendor Class
- [ 756.361255] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
- [ 756.361256] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
- [ 756.356059] Restarting tasks ... done.
- [ 756.868802] r8169 0000:01:00.0 eth0: link up
- [ 757.343278] ==>rtw_ps_processor .fw_state(8)
- [ 757.343284] ==>ips_enter cnts:2
- [ 757.343287] ===> rtw_ips_pwr_down...................
- [ 757.343521] ====> rtw_ips_dev_unload...
- [ 757.366822] usb_read_port_cancel
- [ 757.367017] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 757.367265] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 757.367515] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 757.367765] usb_read_port_complete()-1284: RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 757.367774] usb_write_port_cancel
- [ 757.367790] ==> rtl8192cu_hal_deinit
- [ 757.367793] bkeepfwalive(0)
- [ 757.367795] card disble without HWSM...........
- [ 757.373023] <=== rtw_ips_pwr_down..................... in 32ms
- [ 757.657645] drxk: status = 0x439130d9
- [ 757.657652] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz
- [ 758.902120] drxk: DRXK driver version 0.9.4300
- [ 758.916495] drxk: frontend initialized.
- [ 758.916513] xc5000 13-0061: creating new instance
- [ 758.916992] xc5000: Successfully identified at address 0x61
- [ 758.916995] xc5000: Firmware has not been loaded previously
- [ 758.917000] DVB: registering new adapter (em2884 #0)
- [ 758.917009] usb 1-1: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
- [ 758.921911] em2884 #0: Successfully loaded em28xx-dvb
- [ 758.922247] Registered IR keymap rc-hauppauge
- [ 758.922364] input: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc3/input16
- [ 758.922645] rc3: em28xx IR (em2884 #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc3
- xbmc@xbmc-desktop:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement