API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 6th, 2015
1,744
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.36 KB | None | 0 0
raw download clone embed print report
  1. DDR DRAM 32 MB @ 195 MHz,SPI FLASH 8 M
  2. ---Octtel(R---Wireless regDomain<ETSI>
  3. ---MAC Address : 84:c9:xx:xx:xx:xx
  4.  
  5. Press 'i' to update system image.
  6. Press 'k' to update kernel image.
  7. Press 'r' to update root fs image.
  8. Press 'l' to updaSart Boot to system ....
  9. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  10. Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  11. Memory: 21820k/32768k available (4245k kernel code, 10948k reserved, 991k data, 136k init, 0k highmem)
  12. Mount-cache hash table entries: 512
  13. Checking for 'wait' instruction... available.
  14. NET: Registered protocol family 16
  15. SCSI subsystem initialized
  16. usbcore: registered new interface driver usbfs
  17. usbcore: registered new interface driver hub
  18. usbcore: registered new device driver usb
  19. NET: Registered protocol family 2
  20. IP route cache hash table entries: 256 (order: -2, 1024 bytes)
  21. TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  22. TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  23. TCP: Hash tables configured (established 1024 bind 512)
  24. TCP reno registered
  25. Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
  26. Squashfs 2.2 includes LZMA decompression support
  27. io scheduler noop registered
  28. io scheduler anticipatory registered (default)
  29. Serial: 8250/16550 driver $Revision: 1.2 $ 1 ports, IRQ sharing disabled
  30. serial8250: ttyS0 at MMIO 0x0 (irq = 12) is a 16550A
  31. Probing RTL8186 10/100 NIC...
  32. chip name: 8196B, chip revid: 0
  33. NOT YET
  34. Support Half Napt Acceleration,Support Inbound Collision Avoidance
  35. OCTTEL: set EnUkVIDtoCPU=1
  36. eth0 added. vid=9 Member port 0x10...
  37. eth1 added. vid=8 Member port 0x1...
  38. eth2 added. vid=10 Member port 0x8...
  39. eth3 added. vid=11 Member port 0x4...
  40. eth4 added. vid=12 Member port 0x2...
  41. Start Init Local Public
  42. PPP generic driver version 2.4.2
  43. PPP_sync: error -22 registering line disc.
  44. MPPE/MPPC encryption/compression module registered
  45. NET: Registered protocol family 24
  46. RTL8192SE driver version 1.21 (2010-04-02)
  47. Boot from EFUSE
  48. Autoload OK!!
  49. SPI INIT
  50. flash device: 0x400000 at 0xbfe00000
  51. SPI 1
  52.  
  53. MXIC matched!!get SPI chip driver!
  54. Physically mapped flash: Found an alies 0x800000 for the chip at 0x0, mxic device detect.
  55.  
  56. ---> 1 1 0 0 0 <--- 1 --> 1.1.26.0 <--
  57. Creating 5 MTD partitions on "Physically mapped flash":
  58. 0x00000000-0x00800000 : "total"
  59. 0x00010000-0x007e0000 : "rootfs+kernel"
  60. 0x00000000-0x0000e000 : "boot"
  61. 0x0000e000-0x00010000 : "HW-info"
  62. 0x007e0000-0x00800000 : "SW-info"
  63. RealTek E-Flash System Driver. (C) 2002 RealTek Corp.
  64. Cannot find driver for DiskOnChip Millennium at 0x6000
  65. rtl8652-ehci rtl8652-ehci.0: RTL8652 On-Chip EHCI Host Controller
  66. rtl8652-ehci rtl8652-ehci.0: new USB bus registered, assigned bus number 1
  67. read synopsys=0
  68. read synopsys2=0
  69. rtl8652-ehci rtl8652-ehci.0: irq 10, io base 0xb8021000
  70. rtl8652-ehci rtl8652-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
  71. usb usb1: configuration #1 chosen from 1 choice
  72. hub 1-0:1.0: USB hub found
  73. hub 1-0:1.0: 2 ports detected
  74. rtl8652-ohci rtl8652-ohci.0: Rssigned bus number 2
  75. rtl8652-ohci rtl8652-ohci.0: irq 10, io mem 0xb8020000
  76. usb usb2: configuration #1 chosen from 1 choice
  77. hub 2-0:1.0: USB hub found
  78. hub 2-0:1.0: 2 ports detected
  79. u32 cla==
  80. Request IRQ for PCM Controller OK!.
  81. ================= FISISH ===============
  82. SDK VoIP Version: 1.3.5
  83. INITIAL VOIP DSP PROGRAM
  84. IMEM_init_OK
  85. INIT VAR OK
  86. === RTP Event Send Tasklet Initialization ===
  87. ========================================
  88. Octtel HW Module:<0x0c> [Module ON201LW 2FXS+Life line]
  89. OTDrv: ZARLINK[LE88286: DeviceID<00> CSID<00>] Initial Success!
  90. OTDrv: char driver<235>
  91. OTDrv: HW[ON201LW v0.0.0.0] MaxCh[3] FXS[2] FXO[1]
  92. VFS: Mounted root (squashfs filesystem) readonly.
  93. Freeing unused kernel memory: 136k freed
  94. mount /proc file system ok!
  95. mount /var file system ok!
  96. init started: BusyBox v1.8.2 (2010-12-07 16:09:24 CST)
  97. # x_syslogd: Octtel syslogd started
  98. PM: server started
  99.  
  100. Flash: File Name Size Type Priority
  101. -------------- -------- ------ ----------
  102. otgw_b.ini 81044 1 1
  103.  
  104. TOTAL: 1 file(s) IN-USED: 81044 bytes FREE: 49650 bytes
  105.  
  106. Cfg_CgiParaInit[0,3]
  107. NCS: MaxLineCnt=3, FxsLineCnt=2, FxoLineCnt=1, IsdnLineCnt=0
  108. Cfg_CgiParaInit[1,3]
  109. NCS: WAN mode: DHCP
  110. NCS: SetWaSetLinkSpeed: port 1 phy down
  111. nPortLinkSpSetLinkSpeed: port 2 phy down
  112. eed: AUTO
  113. NCSSetLinkSpeed: port 3 phy down
  114. : SetLanPortLiSetLinkSpeed: port 4 phy down
  115. nkControl: PHY down!
  116. NCS: SetLanPortLinkControl: PHY down!
  117. NCS: SetLanPortLinkControl: PHY down!
  118. NCS: SetLanPortLinkControl: PHY down!
  119. Support Half Napt Acceleration,Support Inbound Collision Avoidance
  120. TE0[1]TE1[1]<6>device eth0 entered promiscuous mode
  121. br0: port 1(eth0) entering learning state
  122. NCS: SetWanQoS: Port 0, i=102400 o=102400
  123. RealtekSetVoipDscp: 68 b8
  124. udhcp server (v0.9.9-pre) started
  125. NCS: running Gateway mode
  126. NCS: Setting up DoS Protection, control value = 00004d76
  127. telnet handle=9
  128. Initializing USB Mass Storage driver...
  129. usbcore: registered new interface driver usb-storage
  130. USB Mass Storage support registered.
  131. udhcp client (v0.9.9-pre) started
  132. NCS: connection WAN started
  133. PM: `/opt/webs 80` started (pid = 701)
  134. br0: topology change detected, propagating
  135. br0: port 1(eth0) entering forwarding state
  136. 00:00:12 Octtel HTTP Server 1.5.0.0, Listen Port(80), SSL(0)
  137. Root[/var/home] Len(9)
  138. WanSpecified=[eth1]
  139. <<MAX=4>>
  140. MaxLine=3, FxsLine=2, FxoLine=1, IsdnLine=0
  141. [000000] SetRunLedMode(0)=0
  142. [000000] RU_1.00 == Ver(1.02.38.68.5433 2011/04/07 19:00:16) PId(266.DLink.RU.Lan1Vlan.DualDhcp.DhcpOpt121.Wireless.NoPrefix.TR069.jumper25.LifeLine.drtp) Drv(1.2.3.99) Hw(ON201LW) ==
  143. Cfg_CgiParaInit[1,3]
  144. [000000] LogOption=0
  145. BankAmount=1, BankBoot=1
  146. WanMac=84C9B2XXXXXX
  147. Main_InitLineAndInfo_Step1()
  148. ========= Fxo is Legerity & PSTN =========
  149. RegistFxsHunting But No Sip_Prefix
  150. CfgLoad_CptUdtTableAndSetDrv
  151. ROH=0
  152. Impedance: fxs=0, fxo=0
  153. GetFxoImpedanceType()=-1
  154. AddGrp#0=0 AddGrp#1=1
  155. AddGrp=2
  156. AddGrp=3
  157. Cfg_CgiParaLoadTables() OK
  158. Main_InitLineAndInfo_Step2()
  159. InitLineAndInfo OK
  160. drtp: RtpApiInit OK, PortBase=9000
  161. GwTftp Init [ON201LW{0.0.0.0}] [1.02.38.68-b5433{1.2.3.99.180/266}]
  162. **************RealtekSetVoipDscp: 68 b8
  163. udh-sh: RealtekSetVoipDscp:: not found
  164. c# udhcp server (v0.9.9-pre) started
  165. -sh: syntax error: "(" unexpected
  166. # NCS: running Gateway mode
  167. NCS: r-sh: NCS:: not found
  168. u# NCS: running Gateway mode
  169. -sh: NCS:: not found
  170. # NCS: Setting up DoS Protection, control value = 00004d76
  171. -sh: NCS:: not found
  172. # telnet handle=9
  173. -sh: telnet: not found
  174. # Initializing USB Mass Storage driver...
  175. -sh: Initializing: not found
  176. # usbcore: registered new interface driver usb-storage
  177. -sh: usbcore:: not found
  178. # USB Mass Storage support registered.
  179. -sh: USB: not found
  180. # udhcp client (v0.9.9-pre) started
  181. -sh: syntax error: "(" unexpected
  182. # NCS: connection WAN started
  183. -sh: NCS:: not found
  184. # PM: `/opt/webs 80` started (pid = 701)
  185. -sh: syntax error: "(" unexpected
  186. # br0: topology change detected, propagating
  187. br0-sh: br0:: not found
  188. : p# br0: port 1(et00:00:12 Octtel HTTP Server 1.5.0.0, Listen Port(80), SSL(0)
  189. -sh: syntax error: "(" unexpected
  190. # Root[/var/home] Len(9)
  191. -sh: syntax error: "(" unexpected
  192. # *WanSpecified=[eth1]
  193. <# <<MAX=4>>
  194. -sh: syntax error: newline unexpected
  195. # MaxLine=3, FxsLine=2, FxoLine=1, IsdnLine=0
  196. M> MaxLine=3▒SetLinkSpeed: port 1 phy down
  197. SetLinkSpeed: port 2 phy down
  198. SetLinkSpeed: port 3 phy down
  199. SetLinkSpeed: port 4 phy down
  200. Support Half Napt Acceleration,Support Inbound Collision Avoidance
  201. SetLinkSpeed: port 1 phy down
  202. SetLinkSpeed: port 2 phy down
  203. SetLinkSpeed: port 3 phy down
  204. SetLinkSpeed: port 4 phy down
  205. Support Half Napt Acceleration,Support Inbound Collision Avoidance
  206. br0: port 1(eth0) entering disabled state
  207. SetLinkSpeed: port 1 phy down
  208. SetLinkSpeed: port 2 phy down
  209. SetLinkSpeed: port 3 phy down
  210. SetLinkSpeed: port 4 phy down
  211. Support Half Napt Acceleration,Support Inbound Collision Avoidance
  212. br0: port 1(eth0) entering learning state
  213. br0: port 1(eth0) entering disabled state
  214. br0: port 1(eth0) entering learning state
  215. br0: port 1(eth0) entering disabled state
  216. br0: port 1(eth0) entering learning state
  217. SetLinkSpeed: port 1 phy down
  218. SetLinkSpeed: port 2 phy down
  219. SetLinkSpeed: port 3 phy down
  220. SetLinkSpeed: port 4 phy down
  221. Support Half Napt Acceleration,Support Inbound Collision Avoidance
  222. br0: topology change detected, propagating
  223. br0: port 1(eth0) entering forwarding state
  224. br0: port 1(etpeed: port 2 phy down
  225. SetLinkSpeed: port 3 phy down
  226. SetLinkSpeed: port 4 phy down
  227. Support Half Napt Acceleration,Support Inbound Collision Avoidance
  228. br0: port 1(eth0) entering learning statbr0: port 1(eth0) entering disabled state
  229. SetLinkSpeed: port 1 phy down
  230. SetLinkSpeed: port 2 phy down
  231. SetLinkSpeed: port 3 phy down
  232. SetLinkSpeed: port 4 phy down
  233. Support Half Napt Acceleration,Support Inbound Collision Avoidance
  234. br0: port 1(etpeed: port 2 phy down
  235. SetLinkSpeed: port 3 phy down
  236. br0: port 1(eth0) entering disabled state
  237. SetLinkSpeed: port 4 phy down
  238. Support Half Napt Acceleration,Support Inbound Collision AvoidancNCS: SetWanQoS: Port 0, i=102400 o=102400
  239. RealtekSetVoipDscp: 68 b8
  240. udhcp server (v0.9.9-pre) started
  241. NCS: running Gateway mode
  242. NCS: Setting up DoS Protection, control value = 00004d76
  243. telnet handle=9
  244. Initializing USB Mass Storage driver...
  245. usbcore: registered new interface driver usb-storage
  246. USB Mass Storage support registered.
  247. udhcp client (v0.9.9-pre) started
  248. NCS: connection WAN started
  249. PM: `/opt/webs 80` started (pid = 701)
  250. br0: topology change detected, propagating
  251. br0: port 1(eth0) entering forwarding state
  252. 00:00:13 Octtel HTTP Server 1.5.0.0, Listen Port(80), SSL(0)
  253. Root[/var/home] Len(9)
  254. WanSpecified=[eth1]
  255. <<MAX=4>>
  256. MaxLine=3, FxsLine=2, FxoLine=1, IsdnLine=0
  257. [000000] SetRunLedMode(0)=0
  258. [000000] RU_1.00 == Ver(1.02.38.68.5433 2011/04/07 19:00:16) PId(266.DLink.RU.Lan1Vlan.DualDhcp.DhcpOpt121.Wireless.NoPrefix.TR069.jumper25.LifeLine.drtp) Drv(1.2.3.99) Hw(ON201LW) ==
  259. Cfg_CgiParaInit[1,3]
  260. [000000] LogOption=0
  261. BankAmount=1, BankBoot=1
  262. WanMac=84C9XXXXXX
  263. Main_InitLineAndInfo_Step1()
  264. ========= Fxo is Legerity & PSTN =========
  265. RegistFxsHunting But No Sip_Prefix
  266. CfgLoad_CptUdtTableAndSetDrv
  267. ROH=0
  268. Impedance: fxs=0, fxo=0
  269. GetFxoImpedanceType()=-1
  270. AddGrp#0=0 AddGrp#1=1
  271. AddGrp=2
  272. AddGrp=3
  273. Cfg_CgiParaLoadTables() OK
  274. Main_InitLineAndInfo_Step2()
  275. InitLineAndInfo OK
  276. drtp: RtpApiInit OK, PortBase=9000
  277. GwTftp Init [ON201LW{0.0.0.0}] [1.02.38.68-b5433{1.2.3.99.180/266}]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!