Advertisement
Lekensteyn

sx551 2.6.37.6 bootlog

Mar 31st, 2012
173
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.49 KB | None | 0 0
  1. ===========================================================
  2. TI ADSL AR7300 Loader 0.71.4 build Oct 18 2005 11:13:40
  3. Broad Net Technology, INC.
  4. ===========================================================
  5. MXIC MX29LV160B bottom boot 16-bit mode found
  6.  
  7. Copying boot params.....DONE
  8.  
  9. Flash Checking Passed.
  10.  
  11. Unzipping web at 0x94f30000 ... [LZMA] done
  12. Unzipping code at 0x94000000 ... [LZMA] done[ 0.000000] Linux version 2.6.37.6 (peter@penguin) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #24 Sat Mar 31 12:00:15 CEST 2012
  13. [ 0.000000] ar7-gpio: registered 32 GPIOs
  14. [ 0.000000] bootconsole [early0] enabled
  15. [ 0.000000] CPU revision is: 00018448 (MIPS 4KEc)
  16. [ 0.000000] TI AR7 (TNETD7300), ID: 0x0005, Revision: 0x26
  17. [ 0.000000] Determined physical RAM map:
  18. [ 0.000000] memory: 02000000 @ 14000000 (usable)
  19. [ 0.000000] Initrd not found or empty - disabling initrd
  20. [ 0.000000] Zone PFN ranges:
  21. [ 0.000000] Normal 0x00014000 -> 0x00016000
  22. [ 0.000000] Movable zone start PFN for each node
  23. [ 0.000000] early_node_map[1] active PFN ranges
  24. [ 0.000000] 0: 0x00014000 -> 0x00016000
  25. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  26. [ 0.000000] Kernel command line: console=ttyS0,115200
  27. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  30. [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
  31. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
  32. [ 0.000000] Memory: 29728k/32768k available (2127k kernel code, 3040k reserved, 330k data, 152k init, 0k highmem)
  33. [ 0.000000] NR_IRQS:256
  34. [ 0.000000] Calibrating delay loop... 149.50 BogoMIPS (lpj=747520)
  35. [ 0.210000] pid_max: default: 32768 minimum: 301
  36. [ 0.210000] Mount-cache hash table entries: 512
  37. [ 0.230000] NET: Registered protocol family 16
  38. [ 0.260000] bio: create slab <bio-0> at 0
  39. [ 0.270000] SCSI subsystem initialized
  40. [ 0.280000] Switching to clocksource MIPS
  41. [ 0.300000] NET: Registered protocol family 2
  42. [ 0.310000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  43. [ 0.320000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  44. [ 0.320000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.330000] TCP: Hash tables configured (established 1024 bind 1024)
  46. [ 0.340000] TCP reno registered
  47. [ 0.340000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  48. [ 0.350000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  49. [ 0.350000] NET: Registered protocol family 1
  50. [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  51. [ 0.440000] msgmni has been set to 58
  52. [ 0.440000] io scheduler noop registered
  53. [ 0.450000] io scheduler deadline registered (default)
  54. [ 0.460000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  55. [ 0.460000] serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a TI-AR7
  56. [ 0.470000] console [ttyS0] enabled, bootconsole disabled
  57. [ 0.470000] console [ttyS0] enabled, bootconsole disabled
  58. [ 0.480000] serial8250: ttyS1 at MMIO 0x8610f00 (irq = 16) is a TI-AR7
  59. [ 0.500000] physmap platform flash device: 00800000 at 10000000
  60. [ 0.510000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x002249
  61. [ 0.520000] Amd/Fujitsu Extended Query Table at 0x0040
  62. [ 0.530000] Amd/Fujitsu Extended Query version 1.0.
  63. [ 0.530000] number of CFI chips: 1
  64. [ 0.540000] cmdlinepart partition parsing not available
  65. [ 0.550000] RedBoot partition parsing not available
  66. [ 0.550000] Unknown magic: f0f2d579
  67. [ 0.550000] 4 ar7part partitions found on MTD device physmap-flash.0
  68. [ 0.560000] Creating 4 MTD partitions on "physmap-flash.0":
  69. [ 0.570000] 0x000000000000-0x000000010000 : "loader"
  70. [ 0.580000] 0x0000001f0000-0x000000200000 : "config"
  71. [ 0.590000] 0x0000000b0000-0x0000001f0000 : "linux"
  72. [ 0.610000] 0x0000000e0000-0x0000001f0000 : "rootfs"
  73. [ 0.620000] mtd: partition "rootfs" set to be root filesystem
  74. [ 0.630000] split_squashfs: no squashfs found in "physmap-flash.0"
  75. [ 0.640000] Fixed MDIO Bus: probed
  76. [ 1.020000] cpmac-mii: probed
  77. [ 1.080000] eth%d: Marvell 88E6060 PHY driver attached.
  78. [ 1.120000] cpmac: device eth0 (regs: 08612800, irq: 41, phy: 1:10, mac: 7e:89:e1:5e:93:0e)
  79. [ 1.190000] cpmac: device eth1 (regs: 08610000, irq: 27, phy: 1:1f, mac: 22:6f:14:b9:36:2a)
  80. [ 1.200000] ar7_wdt: timer margin 17 seconds (prescale 65535, change 65535, freq 250000000)
  81. [ 1.220000] vlynq0: regs 0x08611800, irq 29, mem 0x04000000
  82. [ 1.830000] vlynq1: regs 0x08611c00, irq 33, mem 0x0c000000
  83. [ 2.440000] TCP westwood registered
  84. [ 2.440000] NET: Registered protocol family 17
  85. [ 2.450000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  86. [ 2.450000] All bugs added by David S. Miller <davem@redhat.com>
  87. [ 2.470000] List of all partitions:
  88. [ 2.470000] 1f00 64 mtdblock0 (driver?)
  89. [ 2.480000] 1f01 64 mtdblock1 (driver?)
  90. [ 2.480000] 1f02 1280 mtdblock2 (driver?)
  91. [ 2.490000] 1f03 1088 mtdblock3 (driver?)
  92. [ 2.490000] No filesystem could mount root, tried: squashfs
  93. [ 2.500000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)
  94. [ 2.510000] Rebooting in 3 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement