dmesg

<6>[    0.000000] Booting Linux on physical CPU 0

<6>[    0.000000] Initializing cgroup subsys cpu

<5>[    0.000000] Linux version 3.0.8-cyanogenmod (neph@Android-Compiler-64) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Jan 2 21:23:20 CST 2013

<4>[    0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d

<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache

<4>[    0.000000] Machine: QCT MSM8X60 FUSION FFA

<6>[    0.000000] memory pool 0 (start 38000000 size 600000) initialized

<6>[    0.000000] memory pool 1 (start 38600000 size 3802000) initialized

<6>[    0.000000] memory pool 3 (start 77300000 size 8d00000) initialized

<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc

<6>[    0.000000] socinfo_init: v6, id=71, ver=2.0, raw_id=1329, raw_ver=1, hw_plat=0,  hw_plat_ver=65537

<6>[    0.000000]  accessory_chip=58 hw_plat_subtype=0

<7>[    0.000000] On node 0 totalpages: 204544

<7>[    0.000000] free_area_init_node: node 0, pgdat c0c96e00, node_mem_map c1a62000

<7>[    0.000000]   Normal zone: 856 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 87720 pages, LIFO batch:15

<7>[    0.000000]   HighMem zone: 1188 pages used for memmap

<7>[    0.000000]   HighMem zone: 114780 pages, LIFO batch:31

<6>[    0.000000] allocating 32043008 bytes at c7e00000 (48000000 physical) for fb

<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @c9c92000 s8928 r8192 d15648 u32768

<7>[    0.000000] pcpu-alloc: s8928 r8192 d15648 u32768 alloc=8*4096

<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 202500

<5>[    0.000000] Kernel command line: androidboot.hardware=iproj uart_console=disable lge.rev=rev_10 lge.hreset=off lge.reboot=pwroff lge.lcd=<null> lge.batt_info=<null> lge.pwron=keypad lge.reset=mode_reset lge.usb_cable=normal kcal= 0 0 0 0 0 0 androidboot.emmc=true androidboot.serialno=97506be androidboot.baseband=svlte2a

<6>[    0.000000] BOARD : LGE rev_10

<6>[    0.000000] BOARD : LGE target 3

<6>[    0.000000] Battery : <null> 0

<6>[    0.000000] usb_cable_info : normal (8)

<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.000000] Memory: 44MB 755MB = 799MB total

<5>[    0.000000] Memory: 757496k/757496k available, 205064k reserved, 463872K highmem

<5>[    0.000000] Virtual kernel memory layout:

<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

<5>[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)

<5>[    0.000000]     vmalloc : 0xdb000000 - 0xfa000000   ( 496 MB)

<5>[    0.000000]     lowmem  : 0xc0000000 - 0xdac00000   ( 428 MB)

<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

<5>[    0.000000]       .init : 0xc0008000 - 0xc0056000   ( 312 kB)

<5>[    0.000000]       .text : 0xc0100000 - 0xc0b788fc   (10723 kB)

<5>[    0.000000]       .data : 0xc0c00000 - 0xc0cb3220   ( 717 kB)

<5>[    0.000000]        .bss : 0xc0cb3244 - 0xc127573c   (5898 kB)

<6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

<6>[    0.000000] Preemptible hierarchical RCU implementation.

<6>[    0.000000] NR_IRQS:855

<6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms

<6>[    0.000000] Console: colour dummy device 80x30

<6>[    0.000000] console [tty0] enabled

<6>[    0.150177] Calibrating delay using timer specific routine.. 13.52 BogoMIPS (lpj=67644)

<6>[    0.150238] pid_max: default: 32768 minimum: 301

<6>[    0.150756] Mount-cache hash table entries: 512

<6>[    0.152069] Initializing cgroup subsys debug

<6>[    0.152099] Initializing cgroup subsys cpuacct

<6>[    0.152221] Initializing cgroup subsys freezer

<6>[    0.152282] CPU: Testing write buffer coherency: ok

<6>[    0.152648] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available

<4>[    0.252807] [BOOT_CAUSE] 1

<6>[    0.262847] Brought up 2 CPUs

<6>[    0.262878] SMP: Total of 2 processors activated (27.05 BogoMIPS).

<6>[    0.275177] print_constraints: dummy:

<3>[    0.275268] rdev_init_debugfs: Error-Bad Function Input

<6>[    0.275604] NET: Registered protocol family 16

<3>[    0.275787] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver

<6>[    0.277282] msm_rpm_init: RPM firmware 2.0.105

<6>[    0.277801] LGE: lge_add_misc_devices

<6>[    0.278228] saw_probe: id=0, name=8901_s0

<6>[    0.278533] saw_probe: id=1, name=8901_s1

<6>[    0.279968] rcg_clk_handoff: gsbi12_uart_clk rate=3686400

<6>[    0.280029] rcg_clk_handoff: gsbi3_qup_clk rate=24000000

<6>[    0.280059] rcg_clk_handoff: gsbi5_qup_clk rate=24000000

<6>[    0.280120] rcg_clk_handoff: sdc1_clk rate=48000000

<6>[    0.280181] rcg_clk_handoff: dsi_byte_clk rate=1

<6>[    0.280242] rcg_clk_handoff: mdp_clk rate=200000000

<6>[    0.280364] rcg_clk_handoff: pixel_mdp_clk rate=53990000

<6>[    0.281921] Max ACPU freq: 1188000 KHz

<6>[    0.285980] CPU0: 17 scaling frequencies supported.

<6>[    0.285980] CPU1: 17 scaling frequencies supported.

<3>[    0.493103] [LG_BTUI] BTINIT------------->msm8x60_init:

<6>[    0.493133] lge_add_btpower_devices, line: 315

<3>[    0.493164] [LG_BTUI] bt_power_init : Called BT Poweer Init

<6>[    0.493286] sensor_power_init, line: 192

<6>[    0.494750] pm8058_probe: PMIC revision: E3

<6>[    0.495941] pm_gpio_probe: OK: base=173, ngpio=40

<6>[    0.496124] pm8xxx_mpp_probe: OK: base=213, ngpio=12

<6>[    0.497406] pm8901_probe: PMIC revision reg: F4

<6>[    0.497436] pm8901_probe: PMIC version: PM8901 rev 2.1

<6>[    0.497833] pm8xxx_mpp_probe: OK: base=225, ngpio=4

<4>[    0.509796] RAM CONSOLE START ADDR : 0x77300000

<4>[    0.509826] RAM CONSOLE END ADDR   : 0x7733ffff

<6>[    0.509918] ram_console: got buffer at 77300000, size 40000

<6>[    0.510070] ram_console: uncorrectable error in header

<6>[    0.510101] ram_console: no valid data in buffer (sig = 0xc0c2d242)

<6>[    0.521209] console [ram-1] enabled

<6>[    0.521392] CRASH LOG START ADDR : 0x77340000

<6>[    0.521484] CRASH LOG END ADDR   : 0x77340fff

<6>[    0.546478] bio: create slab <bio-0> at 0

<6>[    0.547424] ION heap vmalloc created

<6>[    0.547576] ION heap mm created at 38800000 with size 3600000

<6>[    0.547760] ION heap mm_fw created at 38600000 with size 200000

<6>[    0.547912] ION heap mfc created at 3be00000 with size 2000

<6>[    0.548126] ION heap sf created at 77341000 with size 4000000

<6>[    0.548278] ION heap camera_preview created at 7b341000 with size 2000000

<6>[    0.548492] ION heap wb created at 7d341000 with size 2100000

<6>[    0.548614] ION heap qsecom created at 7f441000 with size 600000

<6>[    0.548828] ION heap audio created at 7fa41000 with size 28b000

<5>[    0.549102] pmic8058_pwm_probe: OK

<5>[    0.549804] SCSI subsystem initialized

<6>[    0.550109] usbcore: registered new interface driver usbfs

<6>[    0.550292] usbcore: registered new interface driver hub

<6>[    0.550628] usbcore: registered new device driver usb

<6>[    0.551025] Advanced Linux Sound Architecture Driver Version 1.0.24.

<6>[    0.551635] Bluetooth: Core ver 2.16

<6>[    0.551818] NET: Registered protocol family 31

<6>[    0.552001] Bluetooth: HCI device and connection manager initialized

<6>[    0.552124] Bluetooth: HCI socket layer initialized

<6>[    0.552307] Bluetooth: L2CAP socket layer initialized

<6>[    0.552581] Bluetooth: SCO socket layer initialized

<6>[    0.553222] cfg80211: Calling CRDA to update world regulatory domain

<6>[    0.553466] Switching to clocksource gp_timer

<6>[    0.569580] NET: Registered protocol family 2

<6>[    0.569915] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)

<6>[    0.570312] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

<6>[    0.571228] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

<6>[    0.572204] TCP: Hash tables configured (established 65536 bind 65536)

<6>[    0.572326] TCP reno registered

<6>[    0.572509] UDP hash table entries: 256 (order: 1, 8192 bytes)

<6>[    0.572631] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

<6>[    0.573303] NET: Registered protocol family 1

<6>[    0.573791] RPC: Registered named UNIX socket transport module.

<6>[    0.573974] RPC: Registered udp transport module.

<6>[    0.574096] RPC: Registered tcp transport module.

<6>[    0.574188] RPC: Registered tcp NFSv4.1 backchannel transport module.

<6>[    0.574554] Trying to unpack rootfs image as initramfs...

<6>[    0.675323] Freeing initrd memory: 2420K

<6>[    0.675750] PMU: registered new PMU device of type 0

<6>[    0.676055] PMU: registered new PMU device of type 1

<6>[    0.676605] ETM/ETB intialized.

<6>[    0.676849] pil_qdsp6v3 pil_qdsp6v3: using secure boot

<6>[    0.677307] pil_modem pil_modem: using secure boot

<6>[    0.677642] sdio_al:SDIO-AL SW version 1.30

<3>[    0.679992] smd_channel_probe_worker: allocation table not initialized

<6>[    0.689239] lpa_if_init: lpa_if_ptr 0xda794600   buf_vir 0xffdf0000   buf_phy 0x5ab00000  buf_zise 65536

<6>[    0.691864] charm_modem_probe: Registering charm modem

<5>[    0.694122] msm_rpm_log_probe: OK

<4>[    0.694305] [sdio_debug_init] ++

<4>[    0.694641] [sdio_debug_init]  successfully registered SDIO device

<4>[    0.694763] [sdio_debug_init] --

<4>[    0.695220] msm_camera_vreg_enable:

<4>[    0.754180] msm_camera_vreg_disable:

<4>[    0.755401] msm_camera_vreg_enable:

<4>[    0.756134] msm_camera_vreg_disable:

<7>[    0.757324] Registered led device: spotlight

<6>[    0.757537] sensor_common_power_set pwr_mask(0), on(1), sensor(1)

<6>[    0.763336] k3dh_acc_misc Device detected!

<6>[    0.763977] k3dh_acc_misc I2C driver registered!

<6>[    0.765258] input: accelerometer as /devices/virtual/input/input0

<6>[    0.765869] sensor_common_power_set pwr_mask(1), on(0), sensor(1)

<6>[    0.766418] sensor_common_power_set pwr_mask(0), on(1), sensor(4)

<6>[    0.768524] input: gyroscope as /devices/virtual/input/input1

<6>[    0.768615] sensor_common_power_set pwr_mask(4), on(0), sensor(4)

<6>[    0.769470] sensor_common_power_set pwr_mask(0), on(1), sensor(2)

<6>[    0.771942] ami306 9-000e: force operating mode

<6>[    0.772033] Register input device!

<6>[    0.772277] input: magnetic_field as /devices/virtual/input/input2

<6>[    0.772949] apds9900 9-0039: enable = 0

<6>[    0.773040] power_set_for_8058_l15: prox/als power line: 108, onoff(1)

<6>[    0.793945] apds9900 9-0039: support ver. 1.0.4 enabled

<6>[    0.794342] input: proximity as /devices/virtual/input/input3

<6>[    0.794677] input: light as /devices/virtual/input/input4

<6>[    1.204498] input: touch_dev as /devices/virtual/input/input5

<6>[    1.206481] [Touch] common[1] finger[17] flash[52] button[25]

<6>[    1.208770] [Touch] Synaptics TM1992-001(Interrupt mode): ID[1], FW rev[4], f/u[0], sleep_mode[1]

<6>[    1.208984] [Touch] irq_pin[1] next_work[0] ghost_stage[0x1]

<6>[    1.209106] [Touch] fw_rev[4:101] product_id[TM1992-001:TM1804-001] force_upgrade[0]

<6>[    1.209167] [Touch] Touch driver is initialized

<6>[    1.209503] [Touch] FW-upgrade is not executed

<4>[    1.210174] ### undock detect

<6>[    1.210296] hall_ic_dock_probe:  curr:0,

<3>[    1.210479] hall_ic_dock: hall_ic_dock_probe: Done

<6>[    1.210723] wm9093_amp_ctl_probe()

<6>[    1.210815] wm9093 chip found

<6>[    1.211425] AMP INIT OK

<4>[    1.314453] qfuse_status_init

<4>[    1.315124] diagcmd_probe:lg_fw_diagcmd

<6>[    1.315917] input: ats_input as /devices/virtual/input/input6

<6>[    1.316162] lge_emmc_direct_access_init: finished

<4>[    1.316436] lge_tempdevice_init

<6>[    1.317382] lge_panic_handler: got buffer at 77340000, size 1000

<4>[    1.444396] highmem bounce pool size: 64 pages

<6>[    1.444702] ashmem: initialized

<6>[    1.450225] Hook version: 3.0.17 2012/01/13

<6>[    1.453460] fuse init (API version 7.16)

<6>[    1.453857] msgmni has been set to 578

<6>[    1.455902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)

<6>[    1.456054] io scheduler noop registered

<6>[    1.456237] io scheduler deadline registered (default)

<6>[    1.456390] io scheduler cfq registered

<3>[    1.457672] mdp_bus_scale_update_request invalid bus handle

<6>[    1.462829] mipi_dsi base phy_addr = 0x4700000 virt = 0xdb600000

<6>[    1.463043] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xdb046000

<6>[    1.463287] lm3530_probe: i2c probe start

<6>[    1.464019] mipi_lgit_lcd_probe: mipi lgit lcd probe start

<6>[    1.464263] setting pdata->panel_info.fb_num to 3. type: 8

<6>[    1.464813] mdp4_dsi_vsync_init: ndx=0

<6>[    1.470153] FrameBuffer[0] 720x1280 size=11304960 bytes is registered successfully!

<6>[    1.505065] entering mipi_lgit_lcd_on ..

<6>[    1.634124] exting mipi_lgit_lcd_on ..

<7>[    1.758422] Registered led device: lcd-backlight

<6>[    1.759674] setting pdata->panel_info.fb_num to 2. type: 7

<6>[    1.760162] mdp4_dtv_vsync_init: ndx=0

<6>[    1.767791] FrameBuffer[1] 1920x1080 size=16588800 bytes is registered successfully!

<3>[    1.768280] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group c1720008

<6>[    1.768493] hdmi_msm hdmi_msm.1: HDMI HPD: ON

<6>[    1.768615] hdmi_core_power(on): success

<6>[    1.875335]

<6>[    1.875335]  msm_vidc_enc: Inside vid_enc_init()

<6>[    1.875762]

<6>[    1.875762]  msm_vidc_enc: Inside vid_enc_vcd_init()

<6>[    1.961303] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART

<6>[    2.044342] msm_serial_hs module loaded

<6>[    2.044647] msm_serial_hsl: detected port #1

<6>[    2.044830] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM

<6>[    2.204223] msm_serial_hsl: detected port #0

<6>[    2.204437] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM

<6>[    2.364349] msm_serial_hsl: driver initialized

<6>[    2.365783] msm_rotator_probe: rotator_hw_revision=1

<6>[    2.365875] msm_rotator_probe: rotator_hw_revision=1

<6>[    2.372161] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU

<6>[    2.373718] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU

<6>[    2.375091] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU

<6>[    2.381256] brd: module loaded

<6>[    2.383972] loop: module loaded

<6>[    2.384338] pmem: Initializing pmem_audio (user-space) as non-cached

<6>[    2.384857] allocating 2666496 bytes at   (null) (7fccc000 physical) for pmem_audio

<4>[    2.385284] i2c-core: driver [isa1200] using legacy suspend method

<4>[    2.385406] i2c-core: driver [isa1200] using legacy resume method

<3>[    2.386657] TZCOM: unable to get bus clk

<3>[    2.387176] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22

<6>[    2.393157] adie_codec_register_codec_operations: codec type 1

<6>[    2.393493] pm8xxx_batt_alarm_threshold_set: pm8xxx_batt_alarm_threshold_set: threshod set value is 3500

<6>[    2.393707] pm8xxx_batt_alarm_threshold_set: pm8xxx_batt_alarm_threshold_set: threshod set value is 4350

<6>[    2.393920] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm lower disable

<6>[    2.394104] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm upper disable

<6>[    2.395202] SCSI Media Changer driver v0.25

<6>[    2.395477] PPP generic driver version 2.4.2

<6>[    2.395751] PPP Deflate Compression module registered

<6>[    2.395965] PPP BSD Compression module registered

<6>[    2.396728] PPP MPPE Compression module registered

<6>[    2.396850] NET: Registered protocol family 24

<6>[    2.397033] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

<6>[    2.397247] CSLIP: code copyright 1989 Regents of the University of California.

<6>[    2.397766] tun: Universal TUN/TAP device driver, 1.6

<6>[    2.397949] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

<4>[    2.398956] brcm_static_buf_init: initialize wifi_alloc_data

<4>[    2.399169] Section [3] initial allocation success size[139264]!!!

<4>[    2.399261] Section [2] initial allocation success size[32768]!!!

<4>[    2.399444] Section [1] initial allocation success size[12288]!!!

<4>[    2.399566] Section [0] initial allocation success size[12288]!!!

<6>[    2.399780] rmnet_init: SMD devices[8]

<6>[    2.403686] rmnet_init: SDIO devices[8]

<6>[    2.409759] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[    2.410064] host driver registered w/ tranceiver

<6>[    2.410430] usbcore: registered new interface driver cdc_acm

<6>[    2.410522] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

<6>[    2.410736] Initializing USB Mass Storage driver...

<6>[    2.410888] usbcore: registered new interface driver usb-storage

<6>[    2.411071] USB Mass Storage support registered.

<6>[    2.411193] usbcore: registered new interface driver ums-alauda

<6>[    2.411437] usbcore: registered new interface driver ums-cypress

<6>[    2.411590] usbcore: registered new interface driver ums-datafab

<6>[    2.411804] usbcore: registered new interface driver ums-freecom

<6>[    2.411956] usbcore: registered new interface driver ums-isd200

<6>[    2.412170] usbcore: registered new interface driver ums-jumpshot

<6>[    2.412322] usbcore: registered new interface driver ums-karma

<6>[    2.412536] usbcore: registered new interface driver ums-onetouch

<6>[    2.412689] usbcore: registered new interface driver ums-sddr09

<6>[    2.412933] usbcore: registered new interface driver ums-sddr55

<6>[    2.413085] usbcore: registered new interface driver ums-usbat

<6>[    2.413299] usbcore: registered new interface driver usb_ehset_test

<6>[    2.413757] peripheral driver registered w/ tranceiver

<6>[    2.416534] android_usb gadget: Mass Storage Function, version: 2009/09/11

<6>[    2.416717] android_usb gadget: Number of LUNs=1

<6>[    2.416839]  lun0: LUN: removable file: (no medium)

<6>[    2.417236] android_usb gadget: android_usb ready

<6>[    2.417633] atcmd_init: ATCMD Handler /dev/lge_atcmd major=237

<6>[    2.419342] DIAG registered SDIO device

<6>[    2.419921] diagchar initialized now

<3>[    2.420501] LG_FW :  diagpkt_tbl_reg: DeviceIOControl failed.

<6>[    2.423034] input: i_vzw-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input7

<6>[    2.424072] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input8

<6>[    2.426391] using rtc device, pm8xxx_rtc, for alarms

<6>[    2.426605] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0

<6>[    2.427093] i2c /dev entries driver

<6>[    2.429077] Linux video capture interface: v2.00

<6>[    2.430358] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0

<6>[    2.431488] max17040 11-0036: MAX17040 Fuel-Gauge Ver 02

<4>[    2.431671] i2c-core: driver [max17040] using legacy suspend method

<4>[    2.431854] i2c-core: driver [max17040] using legacy resume method

<7>[    2.432281] ############ [msm_charger_temp_work] POLL TIME = 5400 #####################

<3>[    2.464202] qup_i2c qup_i2c.12: Transaction timed out, SL-AD = 0x6b

<3>[    2.464324] qup_i2c qup_i2c.12: I2C Status: 132100

<3>[    2.464508] qup_i2c qup_i2c.12: QUP Status: 0

<3>[    2.464599] qup_i2c qup_i2c.12: OP Flags: 10

<3>[    2.464813] bq24160 12-006b: bq24160_read_reg: err -110

<7>[    2.465454] bq24160 12-006b: bq24160_probe MPP11 initial value = 1

<3>[    2.504211] qup_i2c qup_i2c.12: Transaction timed out, SL-AD = 0x6b

<3>[    2.504302] qup_i2c qup_i2c.12: I2C Status: 132100

<3>[    2.504516] qup_i2c qup_i2c.12: QUP Status: 0

<3>[    2.504608] qup_i2c qup_i2c.12: OP Flags: 10

<3>[    2.504730] bq24160 12-006b: bq24160_read_reg: err -110

<3>[    2.544219] qup_i2c qup_i2c.12: Transaction timed out, SL-AD = 0x6b

<3>[    2.544311] qup_i2c qup_i2c.12: I2C Status: 132100

<3>[    2.544494] qup_i2c qup_i2c.12: QUP Status: 0

<3>[    2.544616] qup_i2c qup_i2c.12: OP Flags: 10

<3>[    2.544799] bq24160 12-006b: bq24160_write_reg: err -110

<7>[    2.544891] bq24160 12-006b: __set_charger REG_#0 =0x88

<3>[    2.584228] qup_i2c qup_i2c.12: Transaction timed out, SL-AD = 0x6b

<3>[    2.584411] qup_i2c qup_i2c.12: I2C Status: 132100

<3>[    2.584503] qup_i2c qup_i2c.12: QUP Status: 0

<3>[    2.584686] qup_i2c qup_i2c.12: OP Flags: 10

<3>[    2.584808] bq24160 12-006b: bq24160_write_reg: err -110

<7>[    2.584991] bq24160 12-006b: __set_charger REG_#2 =0x4c

<3>[    2.624206] qup_i2c qup_i2c.12: Transaction timed out, SL-AD = 0x6b

<3>[    2.624420] qup_i2c qup_i2c.12: I2C Status: 132100

<3>[    2.624511] qup_i2c qup_i2c.12: QUP Status: 0

<3>[    2.624694] qup_i2c qup_i2c.12: OP Flags: 10

<3>[    2.624816] bq24160 12-006b: bq24160_write_reg: err -110

<7>[    2.624908] bq24160 12-006b: __set_charger REG_#3 =0xac

<6>[    2.634277] msm_hsusb msm_hsusb: msm72k_udc: OFFLINE -> ONLINE

<3>[    2.664184] qup_i2c qup_i2c.12: Transaction timed out, SL-AD = 0x6b

<3>[    2.664398] qup_i2c qup_i2c.12: I2C Status: 132100

<3>[    2.664489] qup_i2c qup_i2c.12: QUP Status: 0

<3>[    2.664672] qup_i2c qup_i2c.12: OP Flags: 10

<3>[    2.664794] bq24160 12-006b: bq24160_write_reg: err -110

<7>[    2.664978] bq24160 12-006b: __set_charger REG_#5 =0xb

<3>[    2.704193] qup_i2c qup_i2c.12: Transaction timed out, SL-AD = 0x6b

<3>[    2.704406] qup_i2c qup_i2c.12: I2C Status: 132100

<3>[    2.704498] qup_i2c qup_i2c.12: QUP Status: 0

<3>[    2.704589] qup_i2c qup_i2c.12: OP Flags: 10

<3>[    2.704803] bq24160 12-006b: bq24160_write_reg: err -110

<7>[    2.704895] bq24160 12-006b: __set_charger REG_#6 =0x40

<3>[    2.744201] qup_i2c qup_i2c.12: Transaction timed out, SL-AD = 0x6b

<3>[    2.744323] qup_i2c qup_i2c.12: I2C Status: 132100

<3>[    2.744506] qup_i2c qup_i2c.12: QUP Status: 0

<3>[    2.744628] qup_i2c qup_i2c.12: OP Flags: 10

<3>[    2.744720] bq24160 12-006b: bq24160_write_reg: err -110

<7>[    2.744903] bq24160 12-006b: __set_charger REG_#7 =0xa0

<7>[    2.745025] bq24160 12-006b: __set_charger Enable charger

<6>[    2.746124] msm_adc successfully registered

<5>[    2.746887] tsens_tm_probe: OK

<6>[    2.784240] pmic8058_xoadc:The offset for AMUX calibrationwas -486

<6>[    2.789123] pm8xxx_tm_probe: OK

<6>[    2.789581] pm8xxx_tm_probe: OK

<6>[    2.790374] device-mapper: uevent: version 1.0.3

<6>[    2.790985] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

<6>[    2.791351] Bluetooth: HCI UART driver ver 2.2

<6>[    2.791473] Bluetooth: HCI H4 protocol initialized

<6>[    2.791564] Bluetooth: HCI_IBS protocol initialized

<6>[    2.791748] Bluetooth: MSM Sleep Mode Driver Ver 1.1

<6>[    2.792633] cpuidle: using governor ladder

<6>[    2.792846] cpuidle: using governor menu

<6>[    2.793304] mmc0: mci-version: 0

<3>[    2.793457] mmc0: No card detect facilities available

<6>[    2.793945] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1

<6>[    2.794128] mmc0: 8 bit data mode enabled

<6>[    2.794281] mmc0: 4 bit data mode disabled

<6>[    2.794372] mmc0: polling status mode disabled

<6>[    2.794555] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz

<6>[    2.794677] mmc0: Slot eject status = 0

<6>[    2.794769] mmc0: Power save feature enable = 1

<6>[    2.794952] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x59f80000

<6>[    2.795074] mmc0: DM cmd busaddr 0x59f80000, cmdptr busaddr 0x59f97f40

<6>[    2.795501] mmc1: mci-version: 0

<6>[    2.795989] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4

<6>[    2.796173] mmc1: 8 bit data mode enabled

<6>[    2.796295] mmc1: 4 bit data mode disabled

<6>[    2.796478] mmc1: polling status mode disabled

<6>[    2.796569] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz

<6>[    2.796752] mmc1: Slot eject status = 0

<6>[    2.796875] mmc1: Power save feature enable = 1

<6>[    2.796966] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x59fa0000

<6>[    2.797149] mmc1: DM cmd busaddr 0x59fa0000, cmdptr busaddr 0x59fb7f40

<6>[    2.797576] mmc2: mci-version: 0

<6>[    2.798187] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2

<6>[    2.798400] mmc2: 8 bit data mode disabled

<6>[    2.798492] mmc2: 4 bit data mode enabled

<6>[    2.798614] mmc2: polling status mode disabled

<6>[    2.798797] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz

<6>[    2.798889] mmc2: Slot eject status = 1

<6>[    2.799072] mmc2: Power save feature enable = 1

<6>[    2.799194] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x59fc0000

<6>[    2.799285] mmc2: DM cmd busaddr 0x59fc0000, cmdptr busaddr 0x59fd7f40

<6>[    2.799743] mmc3: mci-version: 0

<3>[    2.799896] bcm432x_sdcc_wlan_slot_status: 34 0

<6>[    2.800476] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,290 dma 21 dmacrcri 5

<6>[    2.800598] mmc3: 8 bit data mode disabled

<6>[    2.800689] mmc3: 4 bit data mode enabled

<6>[    2.800811] mmc3: polling status mode disabled

<6>[    2.800994] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz

<6>[    2.801086] mmc3: Slot eject status = 1

<6>[    2.801208] mmc3: Power save feature enable = 1

<6>[    2.801391] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x59fe0000

<6>[    2.801483] mmc3: DM cmd busaddr 0x59fe0000, cmdptr busaddr 0x59ff7f40

<6>[    2.801910] mmc4: mci-version: 0

<6>[    2.802337] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14

<6>[    2.802551] mmc4: 8 bit data mode disabled

<6>[    2.802642] mmc4: 4 bit data mode enabled

<6>[    2.802825] mmc4: polling status mode disabled

<6>[    2.802947] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz

<6>[    2.803131] mmc4: Slot eject status = 0

<6>[    2.803222] mmc4: Power save feature enable = 1

<6>[    2.803344] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x59800000

<6>[    2.803527] mmc4: DM cmd busaddr 0x59800000, cmdptr busaddr 0x59817f40

<7>[    2.804229] Registered led device: button-backlight

<6>[    2.804870] usbcore: registered new interface driver usbhid

<6>[    2.804992] usbhid: USB HID core driver

<6>[    2.805816] logger: created 256K log 'log_main'

<6>[    2.806091] logger: created 256K log 'log_events'

<6>[    2.806427] logger: created 256K log 'log_radio'

<6>[    2.806671] logger: created 256K log 'log_system'

<6>[    2.808227] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0

<6>[    2.808654] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0

<6>[    2.809051] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0

<6>[    2.809570] mvs-cpu-dai mvs-cpu-dai.0: asoc_mvs_cpu_probe: dev name mvs-cpu-dai.0

<6>[    2.809967] mvs-codec-dai mvs-codec-dai.0: asoc_mvs_codec_probe: dev name mvs-codec-dai.0

<6>[    2.810363] msm-mvs-audio msm-mvs-audio.0: msm_pcm_probe: dev name msm-mvs-audio.0

<6>[    2.811340] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok

<6>[    2.811676] asoc: mvs-codec-dai <-> mvs-cpu-dai.0 mapping ok

<6>[    2.813690] ALSA device list:

<6>[    2.813812]   #0: msm-audio

<6>[    2.814025] Mirror/redirect action on

<6>[    2.814147] u32 classifier

<6>[    2.814361]     Actions configured

<6>[    2.814483] Netfilter messages via NETLINK v0.30.

<6>[    2.814636] nf_conntrack version 0.5.0 (11873 buckets, 47492 max)

<6>[    2.815399] ctnetlink v0.93: registering with nfnetlink.

<6>[    2.815551] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

<6>[    2.815734] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

<6>[    2.816314] xt_time: kernel timezone is -0000

<6>[    2.816680] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[    2.817047] arp_tables: (C) 2002 David S. Miller

<6>[    2.817291] TCP cubic registered

<6>[    2.817382] Initializing XFRM netlink socket

<6>[    2.818298] NET: Registered protocol family 10

<6>[    2.820678] Mobile IPv6

<6>[    2.820831] ip6_tables: (C) 2000-2006 Netfilter Core Team

<6>[    2.821136] IPv6 over IPv4 tunneling driver

<6>[    2.822418] NET: Registered protocol family 17

<6>[    2.822540] NET: Registered protocol family 15

<6>[    2.822937] Bluetooth: RFCOMM TTY layer initialized

<6>[    2.823059] Bluetooth: RFCOMM socket layer initialized

<6>[    2.823150] Bluetooth: RFCOMM ver 1.11

<6>[    2.823333] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>[    2.823455] Bluetooth: BNEP filters: protocol multicast

<6>[    2.823669] L2TP core driver, V2.0

<6>[    2.823791] PPPoL2TP kernel driver, V2.0

<5>[    2.823883] Registering the dns_resolver key type

<6>[    2.824157] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0

<5>[    2.824432] Registering SWP/SWPB emulation handler

<6>[    2.832946] clock_late_init() disabled 158 unused clocks

<6>[    2.839355] MSM Watchdog Initialized

<4>[    2.840087] set_dload_mode : 1

<4>[    2.840209] set_dload_mode : 0

<6>[    2.840789] sii9244_probe: add i2c driver : sii9244_i2c_page0

<6>[    2.841033] sii9244_probe: add i2c driver : sii9244_i2c_page1

<6>[    2.841217] sii9244_probe: add i2c driver : sii9244_i2c_page2

<6>[    2.841491] sii9244_probe: add i2c driver : sii9244_i2c_page3

<4>[    2.841949] mhl_power_config

<3>[    2.842071] sii9244_cfg_power: mhl_data.initialized = 0

<6>[    2.842468] input: mhl_virtual_kbmouse as /devices/virtual/input/input9

<4>[    2.842987] mhl_virtual_kbmouse_register: register success for input device

<4>[    2.843841] dhd_module_init: Enter

<4>[    2.843933] wl_android_init

<4>[    2.844146]

<4>[    2.844146] Dongle Host Driver, version 1.15.3

<4>[    2.846923] =========== WLAN going back to live  ========

<3>[    2.847320] bcm432x_sdcc_wlan_slot_status: 34 1

<6>[    2.847503] mmc3: Slot status change detected (0 -> 1)

<6>[    2.867218] android_work: did not send uevent (0 0   (null))

<6>[    2.884277] hdmi_core_power(off): success

<6>[    2.949493] mmc0: new high speed MMC card at address 0001

<6>[    2.950073] mmcblk0: mmc0:0001 HYNIX  7.22 GiB

<6>[    2.954437]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 >

<4>[    3.049926] ------------[ cut here ]------------

<4>[    3.050140] WARNING: at kernel/irq/manage.c:421 enable_irq+0x50/0x6c()

<4>[    3.050231] Unbalanced enable for IRQ 290

<4>[    3.050415] Modules linked in:

<4>[    3.050628] [<c010cf9c>] (unwind_backtrace+0x0/0x12c) from [<c01bfdfc>] (warn_slowpath_common+0x4c/0x64)

<4>[    3.050842] [<c01bfdfc>] (warn_slowpath_common+0x4c/0x64) from [<c01bfe94>] (warn_slowpath_fmt+0x2c/0x3c)

<4>[    3.051055] [<c01bfe94>] (warn_slowpath_fmt+0x2c/0x3c) from [<c020fb40>] (enable_irq+0x50/0x6c)

<4>[    3.051177] [<c020fb40>] (enable_irq+0x50/0x6c) from [<c0529608>] (dhd_customer_gpio_wlan_ctrl+0xbc/0xe0)

<4>[    3.051361] [<c0529608>] (dhd_customer_gpio_wlan_ctrl+0xbc/0xe0) from [<c002a174>] (dhd_module_init+0xc4/0x164)

<4>[    3.051574] [<c002a174>] (dhd_module_init+0xc4/0x164) from [<c01004a0>] (do_one_initcall+0x94/0x164)

<4>[    3.051788] [<c01004a0>] (do_one_initcall+0x94/0x164) from [<c00083ac>] (kernel_init+0x88/0x130)

<4>[    3.051971] [<c00083ac>] (kernel_init+0x88/0x130) from [<c0106f38>] (kernel_thread_exit+0x0/0x8)

<4>[    3.052185] ---[ end trace 9f19c6e48580d12c ]---

<3>[    3.083862] get_usb_cable_type: usb_acc_valid_read_value is 2186

<6>[    3.084899] usb_id_detect: cable_type = 10

<6>[    3.085388] msm_hsusb_ldo_set_3p5: hsusb_ldo6_3p3 is already set (3075000)

<6>[    3.184356] sii9244_workfunc_main called : mhl_workreq = 2

<6>[    3.188201] sii9244_workfunc_pwron: acc_adc = 2186

<6>[    3.243682] mmc3: new high speed SDIO card at address 0001

<4>[    3.246337] dhd_customer_oob_irq_map: customer specific Host GPIO number is (45)

<4>[    3.247314] mem_prealloc: section [3] size[139264]

<4>[    3.247833] mem_prealloc: This data is using!!!

<4>[    3.248596] alloc static buf at d9c40000!

<4>[    3.249481] mem_prealloc: section [4] size[0]

<4>[    3.258300] DHD: dongle ram size is set to 294912(orig 294912)

<4>[    3.258575] dhd_attach: Enter

<4>[    3.258728] dhd_add_if: idx 0, handle->d9cb3000

<4>[    3.258850] mem_prealloc: section [0] size[10312]

<4>[    3.259033] mem_prealloc: This data is using!!!

<4>[    3.260437] p2p0: P2P Interface Registered

<4>[    3.260681] Initialize DPC thread

<4>[    3.260955] dhd_dpc_thread: Enter  Set CPU Affinity only to cpu0

<4>[    3.261077] dhd_dpc_thread: dhd_dpc() set CPU affinity Succeed  PID = 114

<4>[    3.261383] mem_prealloc: section [1] size[10300]

<4>[    3.261505] mem_prealloc: This data is using!!!

<4>[    3.261688] mem_prealloc: section [2] size[32768]

<4>[    3.261779] mem_prealloc: This data is using!!!

<4>[    3.262084] dhd_net_attach: ifidx 0

<4>[    3.262817] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33

<4>[    3.263000] release dhd_registration_sem

<4>[    3.263153] =========== WLAN placed in RESET ========

<3>[    3.263305] bcm432x_sdcc_wlan_slot_status: 34 0

<6>[    3.263488] mmc3: Slot status change detected (1 -> 0)

<6>[    3.668609] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:04:01 UTC (241)

<3>[    3.670806] msm-charger no batt gauge assuming 3.5V

<3>[    3.672210] msm-charger no batt gauge assuming 3.5V

<3>[    3.673126] msm-charger no batt gauge assuming 3.5V

<3>[    3.673675] msm-charger no batt gauge assuming 35 deg G

<3>[    3.674774] msm-charger no batt gauge batt=id_invalid

<3>[    3.675323] msm-charger no batt gauge and no temp adc

<3>[    3.676757] msm-charger no batt gauge assuming 3.5V

<6>[    3.684173] pm8058-charger pm8058-charger: pm8058_chg_determine_initial_state charger present

<6>[    3.685729] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm upper disable

<6>[    3.686309] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm lower disable

<6>[    3.687286] pm8xxx_batt_alarm_threshold_set: pm8xxx_batt_alarm_threshold_set: threshod set value is 4250

<6>[    3.688476] pm8xxx_batt_alarm_threshold_set: pm8xxx_batt_alarm_threshold_set: threshod set value is 4350

<6>[    3.689788] pm8xxx_batt_alarm_threshold_set: pm8xxx_batt_alarm_threshold_set: threshod set value is 4250

<6>[    3.690917] pm8xxx_batt_alarm_enable: pm8xxx_batt_alarm_enable battery alarm lower enable

<6>[    3.693023] HSD.fsa8008[lge_hsd_init      :  680]lge_hsd_init

<6>[    3.695190] HSD.fsa8008[lge_hsd_probe     :  431]lge_hsd_probe

<6>[    3.695373] HSD.fsa8008[lge_hsd_probe     :  516]hi->irq_detect = 639

<6>[    3.695800] HSD.fsa8008[lge_hsd_probe     :  541]hi->irq_key = 640

<6>[    3.696441] input: 8660_handset as /devices/virtual/input/input10

<6>[    3.697113] LGE: Android Vibrator Driver Init

<4>[    3.697601] [LGE:vibrator] GPIO_LIN_MOTOR_EN gpio value :0

<6>[    3.697784] LGE: Android Vibrator Initialization was done

<6>[    3.698608] Freeing init memory: 312K

<4>[    3.704772] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

<6>[    3.846130] msm_battery_gauge_alarm_notify: status: 1

<6>[    3.846282] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm upper disable

<6>[    3.846466] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm lower disable

<3>[    4.034637] qup_i2c qup_i2c.12: Transaction timed out, SL-AD = 0x6b

<3>[    4.035278] qup_i2c qup_i2c.12: I2C Status: 132100

<3>[    4.036254] qup_i2c qup_i2c.12: QUP Status: 0

<3>[    4.036804] qup_i2c qup_i2c.12: OP Flags: 10

<3>[    4.037384] bq24160 12-006b: bq24160_read_reg: err -110

<3>[    4.061248] init: cannot open '/initlogo.rle'

<3>[    4.087493] get_usb_cable_type: usb_acc_valid_read_value is 2186

<3>[    4.088531] ====usb_get_max_power: usb_cable_type=10,maxpower=450

<6>[    4.089263] sii9244_workfunc_main called : mhl_workreq = 2

<6>[    4.092132] msm-charger msm-charger: handle_charger_ready: best charger = usb

<6>[    4.092895] pm8058-charger pm8058-charger: __pm8058_start_charging 450mA 512min

<6>[    4.094360] sii9244_workfunc_pwron: acc_adc = 2186

<6>[    4.094940] pm8058-charger pm8058-charger: pm8058_chg_fastchg_handler begin fast charging

<6>[    4.114715] msm-charger msm-charger: handle_charger_ready: starting safety timer

<3>[    4.308563] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead

<6>[    4.328460] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: data=ordered

<6>[    4.471069] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: noauto_da_alloc

<6>[    4.614624] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1

<6>[    4.701446] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: data=ordered

<6>[    4.791168] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: data=ordered

<6>[    4.892822] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1

<3>[    4.916229] init: exec: pid 144 exited with return code 8: Unknown error: 2048

<6>[    4.949676] EXT4-fs (mmcblk0p22): recovery complete

<6>[    4.954742] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1

<3>[    5.352081] init: exec: pid 174 exited with return code 8: Unknown error: 2048

<6>[    5.719970] EXT4-fs (mmcblk0p26): re-mounted. Opts: barrier=0

<6>[    5.921783] EXT4-fs (mmcblk0p26): re-mounted. Opts: barrier=0

<6>[    5.947387] EXT4-fs (mmcblk0p26): re-mounted. Opts: data=ordered

<6>[    6.034759] subsys-restart: restart_level_set(): Phase 1 behavior activated.

<3>[    6.073791] init: exec: pid 219 exited with return code 127: Unknown error: 32512

<6>[    6.312072] [BSP-USB][enable_store] 0

<3>[    6.312377] android_usb: already disabled

<3>[    6.312622] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead

<3>[    6.312896] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead

<6>[    6.313232] [BSP-USB][enable_store] 1

<7>[    6.317321] lge_skip_stop_charging_with_factory_condition: entered

<7>[    6.318023] lge_skip_stop_charging_with_factory_condition: battery is present! ignore factory condition

<6>[    6.318054] pm8058-charger pm8058-charger: pm8058_stop_charging stopping charging

<6>[    6.318115] msm-charger msm-charger: handle_charger_removed: no chargers

<6>[    6.318115] pm8xxx_batt_alarm_threshold_set: pm8xxx_batt_alarm_threshold_set: threshod set value is 4250

<6>[    6.318145] pm8xxx_batt_alarm_enable: pm8xxx_batt_alarm_enable battery alarm lower enable

<6>[    6.318176] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm upper disable

<6>[    6.318176] msm-charger msm-charger: handle_charger_removed: stopping safety timer work

<6>[    6.319641] [BSP-USB][enable_store] 0

<6>[    6.320617] [BSP-USB][functions_store] mass_storage,adb

<6>[    6.321350] [BSP-USB][enable_store] 1

<3>[    6.322387] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead

<6>[    6.333618] adb_open

<6>[    6.333770] adb_bind_config

<6>[    6.333862] msm_battery_gauge_alarm_notify: status: 1

<3>[    6.333892] mhl_delayed_pwron_request: return [mhl_workreq & MHL_WORKREQ_PWRON]

<6>[    6.334197] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm upper disable

<6>[    6.334381] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm lower disable

<4>[    6.342376] charm_ap2mdm_kpdpwr_on

<3>[    6.347412] get_usb_cable_type: usb_acc_valid_read_value is 2186

<3>[    6.347625] ====usb_get_max_power: usb_cable_type=10,maxpower=450

<3>[    6.347717] mhl_delayed_pwron_request: return [mhl_workreq & MHL_WORKREQ_PWRON]

<6>[    6.351928] msm-charger msm-charger: handle_charger_ready: best charger = usb

<6>[    6.352203] pm8058-charger pm8058-charger: __pm8058_start_charging 450mA 512min

<6>[    6.352722] pm8058-charger pm8058-charger: pm8058_chg_fastchg_handler begin fast charging

<6>[    6.375091] msm-charger msm-charger: handle_charger_ready: starting safety timer

<6>[    6.406158] sii9244_workfunc_main called : mhl_workreq = 2

<6>[    6.410675] sii9244_workfunc_pwron: acc_adc = 2186

<6>[    6.411254] warning: `rild' uses 32-bit capabilities (legacy support in use)

<7>[    6.463317] lge_skip_stop_charging_with_factory_condition: entered

<7>[    6.464630] lge_skip_stop_charging_with_factory_condition: battery is present! ignore factory condition

<6>[    6.477844] pm8058-charger pm8058-charger: pm8058_stop_charging stopping charging

<3>[    6.479248] pm8058-charger pm8058-charger: pm8058_stop_charging called when not fast-charging

<6>[    6.480316] msm-charger msm-charger: handle_charger_removed: no chargers

<6>[    6.480895] pm8xxx_batt_alarm_threshold_set: pm8xxx_batt_alarm_threshold_set: threshod set value is 4250

<6>[    6.481903] pm8xxx_batt_alarm_enable: pm8xxx_batt_alarm_enable battery alarm lower enable

<6>[    6.482940] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm upper disable

<6>[    6.483886] msm-charger msm-charger: handle_charger_removed: stopping safety timer work

<6>[    6.618438] android_work: sent uevent USB_STATE=CONNECTED

<6>[    6.827392] android_usb gadget: high speed config #1: android

<6>[    6.828521] android_work: sent uevent USB_STATE=CONFIGURED

<3>[    6.830291] get_usb_cable_type: usb_acc_valid_read_value is 2186

<3>[    6.830474] ====usb_get_max_power: usb_cable_type=10,maxpower=450

<6>[    6.830749] sii9244_workfunc_main called : mhl_workreq = 2

<6>[    6.833618] sii9244_workfunc_pwron: acc_adc = 2186

<6>[    6.836120] msm-charger msm-charger: handle_charger_ready: best charger = usb

<6>[    6.836456] pm8058-charger pm8058-charger: __pm8058_start_charging 450mA 512min

<6>[    6.837036] pm8058-charger pm8058-charger: pm8058_chg_fastchg_handler begin fast charging

<6>[    6.869720] msm-charger msm-charger: handle_charger_ready: starting safety timer

<3>[    7.325164] get_usb_cable_type: usb_acc_valid_read_value is 2186

<3>[    7.325286] ====usb_get_max_power: usb_cable_type=10,maxpower=450

<6>[    7.325469] sii9244_workfunc_main called : mhl_workreq = 2

<6>[    7.330230] sii9244_workfunc_pwron: acc_adc = 2186

<6>[    7.494689] pil_qdsp6v3 pil_qdsp6v3: brought out of reset

<6>[    7.538146] apr_tal:Q6 Is Up

<6>[    8.522399] msm_release_control: control0

<6>[    8.522613] __msm_release, open count =0

<6>[    8.522705] __msm_release, release VFE

<6>[    8.620544] auddev_cb_function, evt_id=64,

<3>[    8.620758] msm_reset_put:Resetting all devices

<6>[    8.620849] msm_clear_all_session:

<6>[    8.685150] mdp4_dtv_start: <ID=0 1920x1080 (88,44,148), (4,5,36) 74MHz>

<6>[    8.689239] dtv_on: tv_src_clk=74250kHz, pm_qos_rate=74250kHz, [0]

<6>[    8.689575] hdmi_msm hdmi_msm.1: power: ON (1920x1080 74250000)

<6>[    8.689697] hdmi_core_power(on): success

<6>[    8.689819] hdmi_msm hdmi_msm.1: HPD: panel power without 'hpd' feature on

<6>[    8.735137] hdmi_msm hdmi_msm.1: power=ON DVI= ON

<6>[    8.735565] mdp4_dtv_on:

<3>[    8.775146] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=1

<6>[    8.775268] hdmi_msm hdmi_msm.1: power: OFF (audio off, Reset Core)

<6>[    8.775451] hdmi_msm hdmi_msm.1: HDMI Audio: Disabled

<6>[    8.775604] hdmi_core_power(off): success

<6>[    8.775848] hdmi_core_power(on): success

<6>[    8.775970] hdmi_core_power(off): success

<6>[    8.776092] dtv_off

<6>[    8.779327] mdp4_dtv_off:

<6>[    9.353240] pil_modem pil_modem: brought out of reset

<3>[    9.353393] smd_pkt_open: DATA5_CNTL open failed -19

<3>[    9.503204] Notify: smsm init

<6>[    9.503326] _smem_log_init: no power log or log_idx allocated

<3>[    9.869262] smd_pkt_open: DATA5_CNTL open failed -19

<6>[   10.074829] msm8x60_multi_sdio_slot_status_irq: MDM2AP_SYNC Status = 1

<6>[   10.075378] msm8x60_multi_sdio_slot_status_irq: calling sdc2_status_notify_cb

<6>[   10.076324] msm8x60_multi_sdio_slot_status_irq: calling sdc5_status_notify_cb

<6>[   10.135437] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm upper disable

<6>[   10.135986] pm8xxx_batt_alarm_disable: pm8xxx_batt_alarm_disable battery alarm lower disable

<6>[   10.179992] mmc1: new high speed SDIO card at address 0002

<6>[   10.180541] mmc mmc1:0002: SDIO Card claimed.

<6>[   10.181121] sdio_al:setup bootloader on card 1

<6>[   10.181274] sdio_al: SDIOC BOOT SW version 0x30001

<6>[   10.181610] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE

<6>[   10.181610] sdio_al:Bootloader Worker Started, wait for bootloader_done event..

<6>[   10.181884] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE

<6>[   10.183166] sdio_al:In Flashless boot, waiting for its completion

<6>[   10.183349] sdio_al:free sdioc_boot_sw_header.

<6>[   10.274688] mmc4: new high speed SDIO card at address 0002

<6>[   10.277374] mmc mmc4:0002: SDIO Card claimed.

<6>[   10.282318] sdio_al:wait for bootloader completion on card 4

<6>[   10.282897] sdio_al:Bootloader Worker Started, wait for bootloader_done event..

<6>[   10.328247] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 85330000

<6>[   10.329040] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 2

<3>[   10.373870] smd_pkt_open: DATA5_CNTL open failed -19

<6>[   10.580871] sdio_al: sdio_dld_open, TTY DEVICE FOR FLASHLESS BOOT OPENED

<6>[   10.705718] rpcrouter_smd_remote_notify: smd opened 0x  (null)

<6>[   10.710235] rmt_storage_get_ramfs: RAMFS entry: addr = 0x46100000, size = 0x00300000

<6>[   10.710357] rmt_storage_get_ramfs: RAMFS entry: addr = 0x42e00000, size = 0x00002000

<6>[   10.713684] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized

<6>[   10.727996] rmt_storage_event_open_cb: open callback received

<6>[   10.728118] open partition /boot/modem_fs1 handle=1

<6>[   10.728790] rmt_storage_event_user_data_cb: send user data callback received

<6>[   10.729400] rmt_storage_event_open_cb: open callback received

<6>[   10.729583] open partition /boot/modem_fs2 handle=2

<6>[   10.730102] rmt_storage_event_user_data_cb: send user data callback received

<6>[   10.731384] rmt_storage_event_open_cb: open callback received

<6>[   10.731506] open partition /boot/modem_fsg handle=3

<6>[   10.732086] rmt_storage_event_user_data_cb: send user data callback received

<6>[   10.732666] rmt_storage_event_alloc_rmt_buf_cb: Alloc rmt buf callback received

<6>[   10.733337] rmt_storage_event_read_iovec_cb: read iovec callback received

<6>[   10.736175] rmt_storage_ioctl: send status ioctl

<6>[   10.736846] rmt_storage_event_read_iovec_cb: read iovec callback received

<6>[   10.739227] rmt_storage_ioctl: send status ioctl

<6>[   10.749267] rmt_storage_event_read_iovec_cb: read iovec callback received

<3>[   10.890502] smd_pkt_open: DATA5_CNTL open failed -19

<6>[   10.906860] rmt_storage_ioctl: send status ioctl

<3>[   11.397918] smd_pkt_open: DATA5_CNTL open failed -19

<6>[   11.645324] apr_tal:Modem Is Up

<3>[   11.901977] smd_pkt_open: DATA5_CNTL open failed -19

<3>[   12.417968] smd_pkt_open: DATA5_CNTL open failed -19

<3>[   12.927917] smd_pkt_open: DATA5_CNTL open failed -19

<3>[   13.443664] smd_pkt_open: DATA5_CNTL open failed -19

<3>[   13.952178] smd_pkt_open: DATA5_CNTL open failed -19

<3>[   14.455383] smd_pkt_open: DATA5_CNTL open failed -19

<6>[   14.766540] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - DURATION IN MSEC = 4190

<6>[   14.766723] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES WRITTEN ON SDIO BUS = 25485228...BYTES SENT BY TTY = 25485228

<6>[   14.766937] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES RECEIVED ON SDIO BUS = 1612...BYTES SENT TO TTY = 1612

<6>[   14.767211] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - THROUGHPUT=48 Mbit/Sec

<6>[   14.767395] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL_BUFFER_SIZE=16 KB..CLIENT UL_BUFFER=48 KB

<6>[   14.767669] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST OUTGOING BUFFER_SIZE=48 KB

<6>[   14.767883] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL BUFFER ADDRESS = 0x4000

<6>[   14.768157] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT UP BUFFER ADDRESS = 0x8000

<6>[   14.768341] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - READ POINTER = 24492

<6>[   14.768615] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - WRITE POINTER = 24492

<6>[   14.768890] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - READ POINTER = 1612

<6>[   14.769195] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - WRITE POINTER = 1612

<6>[   14.769470] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - READ POINTER = 24492

<6>[   14.769744] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - WRITE POINTER = 24492

<6>[   14.769958] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - END DEBUG INFO

<6>[   14.770233] sdio_al: sdio_dld_close - Freeing sdio_dld data structure, and  returning...

<6>[   14.770263] sdio_al:Got bootloader_done event..

<6>[   14.770324] sdio_al:Got bootloader_done event..

<3>[   14.966400] smd_pkt_open: DATA5_CNTL open failed -19

<3>[   15.470916] smd_pkt_open: DATA5_CNTL open failed -19

<6>[   15.655242] sdio_al:user_irq enabled

<6>[   15.655578] sdio_al:SDIOC SW version 0x40101, sdio_al major 0x4 minor 0x202

<6>[   15.655670] sdio_al:Channel=SDIO_RPC, state=1

<6>[   15.655853] sdio_al:Channel=SDIO_QMI, state=1

<6>[   15.655975] sdio_al:Channel=SDIO_DIAG, state=1

<6>[   15.656158] sdio_al:Channel=SDIO_SMEM, state=1

<6>[   15.656280] sdio_al:Channel=, state=0

<6>[   15.656372] sdio_al:Channel=, state=0

<6>[   15.656555] sdio_al:sdio_al_setup for card 4

<6>[   15.659057] sdio_al:claim IRQ for card 4

<6>[   15.659698] rpcrouter_sdio_remote_probe Called

<6>[   15.660400] sdio_al:ch SDIO_RPC read_threshold=1, write_threshold=576, min_write_avail=544, max_rx_threshold=1088, max_tx_threshold=1152

<6>[   15.660949] sdio_al:sdio_open SDIO_RPC completed OK

<6>[   15.661071] sdio_al: setting channel SDIO_RPC as lpm_chan

<6>[   15.661254] rpcrouter_sdio_remote_probe Completed

<6>[   15.765167] sdio_al:user_irq enabled

<6>[   15.765289] sdio_al:SDIOC SW version 0x40101, sdio_al major 0x4 minor 0x202

<6>[   15.765319] sdio_al:Channel=SDIO_RMNT, state=1

<6>[   15.765319] sdio_al:Channel=SDIO_DUN, state=1

<6>[   15.765350] sdio_al:Channel=SDIO_CIQ, state=1

<6>[   15.765350] sdio_al:Channel=SDIO_ULS, state=1

<6>[   15.765350] sdio_al:Channel=, state=0

<6>[   15.765380] sdio_al:Channel=, state=0

<6>[   15.765380] sdio_al:sdio_al_setup for card 1

<6>[   15.767791] sdio_al:claim IRQ for card 1

<3>[   15.974334] smd_pkt_open: DATA5_CNTL open failed -19

<6>[   16.015655] sdio_al:ch SDIO_QMI read_threshold=1, write_threshold=4096, min_write_avail=4096, max_rx_threshold=8192, max_tx_threshold=8192

<6>[   16.016723] sdio_al:sdio_open SDIO_QMI completed OK

<6>[   16.018157] sdio_ctl_probe Begins

<6>[   16.029846] sdio_al:ch SDIO_DIAG read_threshold=1, write_threshold=4096, min_write_avail=4096, max_rx_threshold=24576, max_tx_threshold=8192

<6>[   16.030456] sdio_al:sdio_open SDIO_DIAG completed OK

<6>[   16.030487] DIAG opened SDIO channel

<6>[   16.095489] sdio_al:ch SDIO_RMNT read_threshold=1, write_threshold=4096, min_write_avail=1600, max_rx_threshold=15360, max_tx_threshold=8192

<6>[   16.096527] sdio_al:sdio_open SDIO_RMNT completed OK

<6>[   16.096893] sdio_al: setting channel SDIO_RMNT as lpm_chan

<4>[   16.099700] [sdio_debug_probe] ++

<6>[   16.100585] sdio_al:ch SDIO_ULS read_threshold=1, write_threshold=2560, min_write_avail=1024, max_rx_threshold=20480, max_tx_threshold=5120

<6>[   16.101837] sdio_al:sdio_open SDIO_ULS completed OK

<4>[   16.102386] [sdio_debug_probe] opened SDIO debug channel

<4>[   16.102691] [sdio_debug_probe] --

<6>[   16.150543] rmt_storage_probe: Remote storage RPC client (0x300100a7)initialized

<6>[   16.232055] tsens_tz_set_mode: mode: 0 --> 1

<3>[   16.478149] smd_pkt_open: DATA5_CNTL open failed -19

<6>[   16.897216] rmt_storage_event_write_iovec_cb: write iovec callback received

<3>[   16.994567] smd_pkt_open: DATA5_CNTL open failed -19

<6>[   17.803558] msm_sdio_dmux_open: opened ch 0

<3>[   18.056427] smd_pkt_open: DATA12_CNTL open failed -19

<3>[   18.060241] smd_pkt_open: DATA13_CNTL open failed -19

<3>[   18.075378] smd_pkt_open: DATA14_CNTL open failed -19

<6>[   18.304382] msm_sdio_dmux_open: opened ch 1

<6>[   18.304595] msm_sdio_dmux_open: opened ch 2

<6>[   18.304870] msm_sdio_dmux_open: opened ch 3

<6>[   18.305145] msm_sdio_dmux_open: opened ch 4

<6>[   18.305358] msm_sdio_dmux_open: opened ch 5

<6>[   18.305633] msm_sdio_dmux_open: opened ch 6

<6>[   18.305816] msm_sdio_dmux_open: opened ch 7

<6>[   20.217254] rmt_storage_event_open_cb: open callback received

<6>[   20.217437] open partition /q6_fs1_parti_id_0x59 handle=4

<6>[   20.219024] rmt_storage_event_alloc_rmt_buf_cb: Alloc rmt buf callback received

<6>[   20.220672] sdio_al:ch SDIO_SMEM read_threshold=1, write_threshold=2560, min_write_avail=1024, max_rx_threshold=20480, max_tx_threshold=5120

<6>[   20.222656] sdio_al:sdio_open SDIO_SMEM completed OK

<6>[   20.226287] rmt_storage_event_user_data_cb: send user data callback received

<6>[   20.228393] rmt_storage_event_open_cb: open callback received

<6>[   20.228607] open partition /q6_fs2_parti_id_0x5A handle=5

<6>[   20.230072] rmt_storage_event_user_data_cb: send user data callback received

<6>[   20.431732] rmt_storage_event_write_iovec_cb: write iovec callback received

<3>[   21.484893] smd_pkt_open: DATA12_CNTL open failed -19

<3>[   21.500518] smd_pkt_open: DATA13_CNTL open failed -19

<3>[   21.504058] smd_pkt_open: DATA14_CNTL open failed -19

<6>[   23.092529] rmt_storage_ioctl: send status ioctl

<6>[   23.096893] rmt_storage_ioctl: send status ioctl

<6>[   23.959747] rmt_storage_event_write_iovec_cb: write iovec callback received

<6>[   24.189483] rmt_storage_event_write_iovec_cb: write iovec callback received

<6>[   25.879425] rmt_storage_ioctl: send status ioctl

<6>[   26.569305] rmt_storage_ioctl: send status ioctl

<6>[   33.626770] alarm_set_rtc: Failed to set RTC, time will be lost on reboot

<6>[   37.724060] sensor_common_power_set pwr_mask(2), on(0), sensor(1)

<6>[   37.727996] sensor_common_power_set pwr_mask(2), on(0), sensor(1)

<6>[   37.730499] sensor_common_power_set pwr_mask(2), on(0), sensor(1)

<6>[   37.733428] sensor_common_power_set pwr_mask(2), on(0), sensor(1)

<6>[   37.736816] sensor_common_power_set pwr_mask(2), on(0), sensor(1)

<6>[   37.740386] sensor_common_power_set pwr_mask(2), on(0), sensor(1)

<6>[   37.742401] sensor_common_power_set pwr_mask(2), on(0), sensor(1)

<6>[   37.744354] sensor_common_power_set pwr_mask(2), on(0), sensor(1)

<6>[   37.746643] sensor_common_power_set pwr_mask(2), on(0), sensor(1)

<6>[   53.706756] vibrator_enable is stating ...

<6>[   53.706878] android_vibrator_off is stating ...

<6>[   53.707122] LGE: vibrator_power_set  enable=0

<6>[   53.707214] android_vibrator_off is exting ...

<6>[   53.707275] vibrator_enable is exting ...

<6>[   53.830535] sensor_common_power_set pwr_mask(2), on(1), sensor(1)