Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- sun4i#printenv
- baudrate=115200
- boot_mmc=fatload mmc 0 0x43000000 script.bin && fatload mmc 0 0x48000000 ${kernel} && watchdog 0 && bootm 0x48000000
- bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
- bootcmd=if run loadbootenv; then echo Loaded environment from ${bootenv};env import -t ${scriptaddr} ${filesize};fi;if test -n ${uenvcmd}; then echo Running uenvcmd ...;run uenvcmd;fi;if run loadbootscr; then echo Jumping to ${bootscr};source ${scriptaddr};fi;run setargs boot_mmc;
- bootdelay=0
- bootenv=uEnv.txt
- bootscr=boot.scr
- console=ttyS0,115200
- filesize=9C88
- kernel=uImage
- loadbootenv=fatload mmc 0 $scriptaddr ${bootenv} || ext2load mmc 0 $scriptaddr ${bootenv} || ext2load mmc 0 $scriptaddr boot/${bootenv}
- loadbootscr=fatload mmc 0 $scriptaddr ${bootscr} || ext2load mmc 0 $scriptaddr ${bootscr} || ext2load mmc 0 $scriptaddr boot/${bootscr}
- loglevel=8
- panicarg=panic=10
- root=/dev/mmcblk0p2 rootwait
- scriptaddr=0x44000000
- setargs=setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs}
- stderr=serial
- stdin=serial
- stdout=serial
- Environment size: 1125/131068 bytes
- U-Boot 2012.10-04277-g7aa9f04-dirty (Apr 28 2013 - 10:20:24) Allwinner Technology
- CPU: SUNXI Family
- Board: MarsBoard A10
- I2C: ready
- DRAM: 1 GiB
- MMC: SUNXI SD/MMC: 0
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Hit any key to stop autoboot: 0
- reading uEnv.txt
- ** Unable to read "uEnv.txt" from mmc 0:1 **
- Loading file "uEnv.txt" from mmc device 0:1
- Failed to mount ext2 filesystem...
- ** Bad ext2 partition or disk - mmc 0:1 **
- ext2load - load binary file from a Ext2 filesystem
- Usage:
- ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
- - load binary file 'filename' from 'dev' on 'interface'
- to address 'addr' from ext2 filesystem
- Loading file "boot/uEnv.txt" from mmc device 0:1
- Failed to mount ext2 filesystem...
- ** Bad ext2 partition or disk - mmc 0:1 **
- ext2load - load binary file from a Ext2 filesystem
- Usage:
- ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
- - load binary file 'filename' from 'dev' on 'interface'
- to address 'addr' from ext2 filesystem
- reading boot.scr
- ** Unable to read "boot.scr" from mmc 0:1 **
- Loading file "boot.scr" from mmc device 0:1
- Failed to mount ext2 filesystem...
- ** Bad ext2 partition or disk - mmc 0:1 **
- ext2load - load binary file from a Ext2 filesystem
- Usage:
- ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
- - load binary file 'filename' from 'dev' on 'interface'
- to address 'addr' from ext2 filesystem
- Loading file "boot/boot.scr" from mmc device 0:1
- Failed to mount ext2 filesystem...
- ** Bad ext2 partition or disk - mmc 0:1 **
- ext2load - load binary file from a Ext2 filesystem
- Usage:
- ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
- - load binary file 'filename' from 'dev' on 'interface'
- to address 'addr' from ext2 filesystem
- reading script.bin
- 40072 bytes read
- reading uImage
- 5080752 bytes read
- ## Booting kernel from Legacy Image at 48000000 ...
- Image Name: Linux-3.4.61+
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 5080688 Bytes = 4.8 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- <6>Booting Linux on physical CPU 0
- <6>Initializing cgroup subsys cpuset
- <5>Linux version 3.4.61+ (hugo@hugo-devel) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #81 PREEMPT Fri Mar 28 20:47:26 CET 2014
- CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine: sun4i
- <6>Memory cut off:
- <6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
- <4>Ignoring unrecognised tag 0x00000000
- <6>Memory Reserved:
- <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
- <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
- <6> G2D : 0x49000000 - 0x49ffffff ( 16 MB)
- <6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
- Memory policy: ECC disabled, Data cache writeback
- <6>sunxi: Allwinner A10 revision C (AW1623/sun4i) detected.
- <7>On node 0 totalpages: 245760
- <7>free_area_init_node: node 0, pgdat c0a237a8, node_mem_map c0bec000
- <7> Normal zone: 1520 pages used for memmap
- <7> Normal zone: 0 pages reserved
- <7> Normal zone: 176656 pages, LIFO batch:31
- <7> HighMem zone: 528 pages used for memmap
- <7> HighMem zone: 67056 pages, LIFO batch:15
- <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768<c>
- <7>pcpu-alloc: <c>[0] <c>0 <c>
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
- <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
- <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>Memory: 448MB 512MB = 960MB total
- <5>Memory: 831168k/831168k available, 151872k reserved, 270336K highmem
- <5>Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0929a90 (9351 kB)
- .init : 0xc092a000 - 0xc09b2000 ( 544 kB)
- .data : 0xc09b2000 - 0xc0a2f7c0 ( 502 kB)
- .bss : 0xc0a2f7e4 - 0xc0beb0f0 (1775 kB)
- <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- <6>NR_IRQS:128
- REGISTERED I2C-0 DEVICES
- REGISTERED I2C-2 DEVICES
- <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- <6>Console: colour dummy device 80x30
- <6>Calibrating delay loop... <c>383.38 BogoMIPS (lpj=1916928)
- <6>pid_max: default: 32768 minimum: 301
- <6>Mount-cache hash table entries: 512
- <6>Initializing cgroup subsys cpuacct
- <6>Initializing cgroup subsys devices
- <6>Initializing cgroup subsys freezer
- <6>Initializing cgroup subsys blkio
- <6>CPU: Testing write buffer coherency: ok
- <6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- <6>Setting up static identity map for 0x4063c220 - 0x4063c278
- <6>devtmpfs: initialized
- <6>dummy:
- <6>NET: Registered protocol family 16
- <6>hw-breakpoint: debug architecture 0x4 unsupported.
- <6>Init eGon pin module V2.0
- SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
- <6>Initialize DMAC OK
- <6>bio: create slab <bio-0> at 0
- <6>sunxi_gpio driver init ver 1.3
- <6>gpiochip_add: registered GPIOs 1 to 18 on device: A1X_GPIO
- <5>SCSI subsystem initialized
- <7>libata version 3.00 loaded.
- <6>usbcore: registered new interface driver usbfs
- <6>usbcore: registered new interface driver hub
- <6>usbcore: registered new device driver usb
- <6>Linux video capture interface: v2.00
- <6>Bluetooth: Core ver 2.16
- <6>NET: Registered protocol family 31
- <6>Bluetooth: HCI device and connection manager initialized
- <6>Bluetooth: HCI socket layer initialized
- <6>Bluetooth: L2CAP socket layer initialized
- <6>Bluetooth: SCO socket layer initialized
- <6>Switching to clocksource aw_64bits_counter
- <5>FS-Cache: Loaded
- <6>cfg80211: Calling CRDA to update world regulatory domain
- <6>CacheFiles: Loaded
- [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_HOST_ONLY
- [sw_hcd0]: usb host driver initialize........
- [sw_hcd0]: open_usb_clock
- [sw_hcd0]: host_init_state = 1
- [sw_hcd0]: platform is usb host
- [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
- [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
- <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
- <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
- <6>hub 1-0:1.0: USB hub found
- <6>hub 1-0:1.0: 1 port detected
- is_on = 1, hcd0_set_vbus_cnt = 2
- <6>NET: Registered protocol family 2
- <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- <6>TCP: Hash tables configured (established 131072 bind 65536)
- <6>TCP: reno registered
- <6>UDP hash table entries: 512 (order: 1, 8192 bytes)
- <6>UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
- <6>NET: Registered protocol family 1
- <6>RPC: Registered named UNIX socket transport module.
- <6>RPC: Registered udp transport module.
- <6>RPC: Registered tcp transport module.
- <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>audit: initializing netlink socket (disabled)
- <5>type=2000 audit(0.369:1): initialized
- highmem bounce pool size: 64 pages
- <5>VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- <5>NFS: Registering the id_resolver key type
- <6>NTFS driver 2.1.30 [Flags: R/W].
- <6>fuse init (API version 7.18)
- <6>msgmni has been set to 1095
- <6>alg: No test for stdrng (krng)
- <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- <6>io scheduler noop registered
- <6>io scheduler deadline registered
- <6>io scheduler cfq registered (default)
- <6>sunxi disp driver loaded (/dev/disp api 1.0)
- <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- <6>[uart]: used uart info.: 0xc5
- <6>[uart]: serial probe 0 irq 1 mapbase 0x01c28000
- <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Linux version 3.4.61+ (hugo@hugo-devel) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #81 PREEMPT Fri Mar 28 20:47:26 CET 2014
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement